Develop Bugs

Unofficial TWRP 2.8.7.1

What is better than the standard CM Recovery:
You can flash another firmware (not the CM)
Normal backup data
You can easily flash the Root
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unlock the bootloader as on CM Wiki instructions
Puth the phone in bootloader mode
In the folder with fastboot put crackling-t0x1.img
Enter the following command:
Code:
fastboot -i 0x2970 erase recovery
then Enter
Code:
fastboot -i 0x2970 flash recovery crackling-t0x1.img
Disconnect the device from the USB and remove the battery. Then replace the battery and restart the device in recovery mode to verify the installation. To do this, hold down the "Volume Down" and "Power".
You can download crackling-t0x1.img from here
http://www91.zippyshare.com/v/60lfsDiR/file.html
Credits to 4PDA Members and especially to FindYanot for developing and allowing posting here
IT is NOT my Work

I've been using this for a while, working very good!
Great to make backups and test ROMs.

There is a problem - this recovery can not mount f2fs partitions

RaidonChrome said:
There is a problem - this recovery can not mount f2fs partitions
Click to expand...
Click to collapse
for my information : which system firmware can mount f2fs partitions?

Dior DNA said:
for my information : which system firmware can mount f2fs partitions?
Click to expand...
Click to collapse
Latest Cyanogen Mod 13 has Linux 3.10, so it should be able to mount f2fs just fine

RaidonChrome said:
Latest Cyanogen Mod 13 has Linux 3.10, so it should be able to mount f2fs just fine
Click to expand...
Click to collapse
thanks, then perhaps latest CM recovery will mount f2fs just fine as well.

Dior DNA said:
thanks, then perhaps latest CM recovery will mount f2fs just fine as well.
Click to expand...
Click to collapse
It does not, in fact it is broken even with ext4 currently

PLEASE HELP, something when wrong
RaidonChrome said:
It does not, in fact it is broken even with ext4 currently
Click to expand...
Click to collapse
Is this the reason why i can't install gapp on my wileyfoxswift and an error appear("e: unable to find partition size for '/recovery") every time i use the wipe.
i upgraded from 12.1 to
13.0-20160127-NIGHTLY-crackling and use the same for recovery but did not work so i installed TWRP and this error occurs -see pics
PLEASE HELP

AromaGapp not working in TWRP
TWRP not working in Aroma Gapp need fix (Aroma is best for me since i can customize install & will not replace CM stock files/app)
In the previous post, i was able to install twrp but i found out on many trial and error that open gapp aroma/full doesn't work both on cm12.1 and cm13.0 using TWRP. Also cm13.0 recovery will not work with open gapp aroma/full.
What works: (haven't tried all version)
On TWRP - i was able to use arm64-pico-6.0 on cm13.0 20160130
On CM Recovery - arm64-aroma-5.1 on cm12.1 20160107
This is based on my experience with the HELP of the awesome people in the forum. I just want to let you know and maybe it will be useful to other noobs like me

noob2016 said:
TWRP not working in Aroma Gapp need fix (Aroma is best for me since i can customize install & will not replace CM stock files/app)
In the previous post, i was able to install twrp but i found out on many trial and error that open gapp aroma/full doesn't work both on cm12.1 and cm13.0 using TWRP. Also cm13.0 recovery will not work with open gapp aroma/full.
What works: (haven't tried all version)
On TWRP - i was able to use arm64-pico-6.0 on cm13.0 20160130
On CM Recovery - arm64-aroma-5.1 on cm12.1 20160107
This is based on my experience with the HELP of the awesome people in the forum. I just want to let you know and maybe it will be useful to other noobs like me
Click to expand...
Click to collapse
Aroma compatibility with TWRP is listed on the Open G-Apps website.
Unfortunately this is the only TWRP we have available to us.

Tamarinde said:
Aroma compatibility with TWRP is listed on the Open G-Apps website.
Unfortunately this is the only TWRP we have available to us.
Click to expand...
Click to collapse
No it is not there is this one https://s.basketbuild.com/devs/beroid/Wileyfox%20Swift%20-%20Crackling/TWRPand yes it works with aroma

Thanks
robin0800 said:
No it is not there is this one https://s.basketbuild.com/devs/beroid/Wileyfox%20Swift%20-%20Crackling/TWRPand yes it works with aroma
Click to expand...
Click to collapse
That is great! i hope i can try i try it but sadly i send it back since the phone was just here for the upgrade. Anyway thanks for the reply here and on my other post.
Much appreciated

robin0800 said:
No it is not there is this one https://s.basketbuild.com/devs/beroid/Wileyfox%20Swift%20-%20Crackling/TWRPand yes it works with aroma
Click to expand...
Click to collapse
Confirmed!!! It works... i used TWRP 3.0. Works on both aroma and pico. Thanks so much!!!!

There is a zip file and recovery. IMG file, any reason why?

image45 said:
There is a zip file and recovery. IMG file, any reason why?
Click to expand...
Click to collapse
The .img file can be flashed by fastboot.
The zip file by any non stock recovery
and yes I do know the image file is contained in the zip but some people may not

robin0800 said:
The .img file can be flashed by fastboot.
The zip file by any non stock recovery
and yes I do know the image file is contained in the zip but some people may not
Click to expand...
Click to collapse
Yes i downloaded the zip file, extracted the recovery.img then flashed by fastboot. I am used to using fastboot commands
So the zip file would function as an update file via a non stock recovery, however once installed would replace the non stock recovery with twrp version!

[RECOVERY][aio_row][UNOFFICIAL] TWRP 3.0.2-8

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TeamWin's TWRP Touch Recovery For Lenovo A7000-a
SCREENSHOT ON ATTACHMENT
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. TWRP also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
This TWRP was originally formed to work on Lenovo K3 Note. After Denis work on K3 Note, I wanted to make it that would work on Lenovo A7000-a to. Today TWRP is the leading custom recovery for Android phones.
A custom recovery is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom “ROM” like OmniROM
You can find the source code for TWRP at https://github.com/omnirom/android_bootable_recovery/​
Flashing Instructions :
To install recovery images use Flashify / Rashr / TWRP Manager from Play Store or flash in your current recovery:
1. Go to install, find and select the Images... button.
2. Browse to the image that you downloaded and select it.
3. Choose recovery and swipe to flash.
Download :
TWRP : Mod Edit: Link Removed
Remember to do backup of your current recovery before installing.​
XDA:DevDB Information
TWRP 3.0.2-8, TWRP for the Lenovo A7000
Contributors
HDHR, sandeep.sethi, Denis_PDA
Version Information
Status: Stable
Created 2016-10-29
Last Updated 2017-02-19
Mod Edit: Thread Closed

Changelog
TWRP 3.0.2-8 :
~Upgraded to TWRP 3.0.2-8 (Base, Security Patch,ETC.)
~Minor fixes
~Added ability to set system.img
=>TWRP -> Install -> Install image -> system.img -> System Image -> Swipe to confirm Flash.
~Optimized OTG FS support FAT32, exFAT, NTFS
~Flashable installation supported
TWRP 3.0.2-6 :
~Updated to TWRP 3.0.2-6 (Security Patch,Base,ETC.)
~Fixed code name error
~Backup and Restore Improvement
~Lot of Improvement
TWRP 3.0.2-5 :
~Initial release
Detailed Changelogs Here :
https://github.com/omnirom/android_bootable_recovery/commits/android-6.0

Reserved

How is it possible ? Flashing a recovery from another recovery ? Doesn't the recovery partition get overwritten?
[Thanks though for the new version]

tanish2k09 said:
How is it possible ? Flashing a recovery from another recovery ? Doesn't the recovery partition get overwritten?
[Thanks though for the new version]
Click to expand...
Click to collapse
Its will overwrite the old one with the new one... You can update via TWRP to
1. Boot to TWRP
2. Select install files
3. Select install image
4. Then select recovery image
5. Select install on recovery
6. Finish and go to reboot option and select reboot to recovery
6. Tadaaa your new Recovery installed

Themes support?

tanish2k09 said:
Themes support?
Click to expand...
Click to collapse
Support :fingers-crossed:

Thanks!

Ceco85 said:
Thanks!
Click to expand...
Click to collapse
Your welcome

What about compatibility of old backup created in 3.0.2-1

CyberDeat said:
What about compatibility of old backup created in 3.0.2-1
Click to expand...
Click to collapse
It I'll not detect backup from old TWRP,you need to backup files on new TWRP and just move your old backup to new folder one

You ported it or built it from source?

tanish2k09 said:
You ported it or built it from source?
Click to expand...
Click to collapse
Build from source on k3 note ported to a7000 :3

How to install on a non-rooted MM A7000-a?

jocph said:
How to install on a non-rooted MM A7000-a?
Click to expand...
Click to collapse
Use SP Flash tools

Thanks for replying. Can you give the steps? Doesn't spflashtool need a scatterfile? Sorry but I'm not very familiar with spflashtool.

Thnx HDHR for the recovery :good:
---------- Post added at 03:37 PM ---------- Previous post was at 03:21 PM ----------
jocph said:
Thanks for replying. Can you give the steps? Doesn't spflashtool need a scatterfile? Sorry but I'm not very familiar with spflashtool.
Click to expand...
Click to collapse
In sp flash tool...for flashing Recovery
1-Install lenovo driver
2-open sp flash tool by administration
3-load scatter file,
4-select recovery only (also select recovery u have downloaded)
5-check in option that dal dal option is tick
6- click on download
7-switch off ur phone...take out battery for 5 sec..reinsert battery and connect ur phone with pc then
It will automatically flash the recovery after u see a download ok popup window disconnect ur phone and u have successfully flash TWRP recovery

Where can I find the scatterfile for this TWRP image? The download only gives the img file. My MM A7000-a is not rooted and does not have custom recovery yet.

i flashed a theme on my old twrp.....the theme got caried on to this one......
i am unable to remove it....plez help.....
there is no folder of twrp in my sd card....

jocph said:
Where can I find the scatterfile for this TWRP image? The download only gives the img file. My MM A7000-a is not rooted and does not have custom recovery yet.
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B5os0Tgr4idrbTA1WkxhUHB6TzA/view
Scatter file...there is also a old TWRP dont use it....

[ROM] ► [8.0.0] ► [UNOFFICIAL] ► Nitrogen OS ► [cheeseburger]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Android OS version: 8.0.0_r17
For devices: cheeseburger
Source code: https://github.com/nitrogen-project | https://github.com/nitrogen-os-devices
Developers: xyyx, poad42
Thanks: ezio84, mydongistiny, Mazda--, beanstown106 and etc.
Google Apps: http://opengapps.org
Recovery: TWRP
The rich functionality is based on AOSP, development was begun in November, 2015.
xyyx (Max) - main developer
Copy the ROM and Gapps in SD card.
- Make a full backup including all data in your internal storage
- Flash in fastboot this TWRP
- Flash latest full firmware Zip
- In recovery format data (this will wipe your internal storage MAKE A BACKUP)
- Reboot into recovery
- Wipe System, Data, Cache and Dalvik cache
- Flash latest ROM
- Flash Gapps
- Flash the no_verity_op5.zip from here
- Flash Magisk or SuperSU (optional)
- Reboot and profit!
Enjoy
https://sourceforge.net/projects/poad42/files/cheeseburger
Translated to EN, RU
Nitrogen Project | Nitrogen Devices
Known Bugs:
Alert slider
Portrait mode
Off screen gestures
XDA:DevDB Information
Nitrogen OS, ROM for the OnePlus 5
Contributors
poad42
Source Code: https://github.com/LineageOS/android_kernel_oneplus_msm8998
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Testing
Created 2017-10-07
Last Updated 2017-10-07

This ROM is encrypted by default. However it can be disabled by flashing this zip https://drive.google.com/file/d/0B86MMdsJ-sNgenZuaHViX1pkSzQ/view?usp=sharing
Its recommended that you use this twrp : https://androidfilehost.com/?fid=817550096634801490 as the official twrp in my experience has /data mounting issues.
For root use magisk: https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
Credits
-GZOSP(Base ROM)
-amartinz
-xyyx
-darkobas

Screenshots.

Very nice rom

Is everything working on this rom?

prajnay said:
Is everything working on this rom?
Click to expand...
Click to collapse
yup everything works. Just use the correct twrp and you should be fine.

poad42 said:
yup everything works. Just use the correct twrp and you should be fine.
Click to expand...
Click to collapse
Will try later today and report.

Looking forward testing this tomorrow! Looks like you might have the first stable Oreo build flashable in twrp!-:highfive:

poad42 said:
yup everything works. Just use the correct twrp and you should be fine.
Click to expand...
Click to collapse
What is the correct twrp? Can I use no verity zip for oneplus 5 to boot this rom on a decrypted device? How is everything working but the op says there are many bugs?

se7ensde said:
What is the correct twrp? Can I use no verity zip for oneplus 5 to boot this rom on a decrypted device? How is everything working but the op says there are many bugs?
Click to expand...
Click to collapse
The twrp linked in the second post.

Omg!! I can't believe that famous and best rom of Rn3 is available for my op5 too.. ???

Del. (the post was removed right before my eyes lol)

Unfortunately camera continue to close! What a pity!

Macchinista said:
Unfortunately camera continue to close! What a pity!
Click to expand...
Click to collapse
Did u try patched google camera?
What gapps do yall recommend?

buski said:
Did u try patched google camera?
What gapps do yall recommend?
Click to expand...
Click to collapse
Open GApps has released official 8.0 GApps

Macchinista said:
Unfortunately camera continue to close! What a pity!
Click to expand...
Click to collapse
Works fine here...
https://imgur.com/a/v8kgF
Issue seems to be with one plus camera, will fix it in next build.

buski said:
Did u try patched google camera?
What gapps do yall recommend?
Click to expand...
Click to collapse
No, i can't try because in recovery linked in OP it didn't appear pin input so the directories are encrypted and i can't install nothing!
After coming back to twrp "classic" i have the message "could not mount /data and unable to find crypt footing"

Macchinista said:
No, i can't try because in recovery linked in OP it didn't appear pin input so the directories are encrypted and i can't install nothing!
After coming back to twrp "classic" i have the message "could not mount /data and unable to find crypt footing"
Click to expand...
Click to collapse
Don't need to flash anything for that, it's an apk install lel.

Is volte working. I can receive calls but cannot make

poad42 said:
Don't need to flash anything for that, it's an apk install lel.
Click to expand...
Click to collapse
I'll try it! But can i ask if i have to install something with twrp multirom linked by you if there is a way to have access to sd cards contents? I try to re-add and remove pin in settings>security but, opposite of "classic" twrp it didn't appear the pin digit message necessary to read phone contents

[TREBLE] Project Treble for Xiaomi Mi Note 2 [SCORPIO][12.09.2018]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is Project Treble?
Everything is explained here!
What's working:
Boots
Wifi
Bluetooth
Camera ( Videos And Photos )
Video Playback
Audio ( Record and Playback )
Sensors
GPS
RIL
VoLTE
What's not working:
Selinux is permissive
You tell me
Generic System Images:
Here
How to flash:
Use a TWRP with /vendor support
Wipe cache, dalvik-cache, system, vendor and data
Flash the required firmware
Flash the treble_scorpio-xxxxxxxx-xxxx.zip
Select "Flash Image"
Flash a Generic System Image in system partition (arm64, A only)
Reboot
Special thanks:
Tranquilitysmile for testing and debugging​
XDA:DevDB Information
Project Treble for the Xiaomi Mi Note 2
Contributors
Psy_Man
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: 8.8.30
Based On: AOSP
Version Information
Status: Stable
Created 2018-05-01
Last Updated 2018-09-12

Screenshots

Wow, amazing work!!

Great job Is it official Magisk working on gsi or any modified one?

In first step, "Flash the Cardinal-AOSP Treble " I have problem when I try to flash in TWRP, some errors, and I stopped.

Try to do some actions and it worked perfectly ?

infact.proj said:
In first step, "Flash the Cardinal-AOSP Treble " I have problem when I try to flash in TWRP, some errors, and I stopped.
Click to expand...
Click to collapse
Maybe you are using an outdated firmware and the modem version check fails. The minimum required is 8.4.12.

Why Error 7
I use twrp3.2.1

Update your firmware. ?

Hello, first of all thanks for your work!
I need some help with the step "Flash a Generic System Image in system partition (amr64, A only)". What exactly should I do?
Thanks

MiguelferraZ said:
Hello, first of all thanks for your work!
I need some help with the step "Flash a Generic System Image in system partition (amr64, A only)". What exactly should I do?
Thanks
Click to expand...
Click to collapse
After downloading any of the System Images in forum linked by OP you just go into TWRP, select Install, switch to img install (bottom right corner) and flash image onto system partition from selectable menu.

quantesh said:
After downloading any of the System Images in forum linked by OP you just go into TWRP, select Install, switch to img install (bottom right corner) and flash image onto system partition from selectable menu.
Click to expand...
Click to collapse
Thanks, but I was just a bit unsure of what file should I download, since I never done this.
For example, I should choose:
system.img for A-only ARM64 devices with GApps and SU
or
system.img for A-only ARM64 devices vanilla
?
Also, On the flashing instructions it doesnt refer to install gapps, but they are not included in the rom right?
So, if I install the ROM, gapps and flash Magisk for Root I should flash the file "system.img for A-only ARM64 devices with GApps and SU" ?
EDIT: So there is no need to flash cardinal ROM now? Just the new build? I'm a little confused with the installation steps...

02.05.2018 build:
- Moved listen_platform_info.xml to /vendor
- Merged changes from LineageOS
Download build

Psy_Man said:
Maybe you are using an outdated firmware and the modem version check fails. The minimum required is 8.4.12.
Click to expand...
Click to collapse
I have 8.1.4 from Pixel experience. I'll try Friday night...

Hello again. I tried to flash the treble_scorpio file on the provided twrp but I'm getting "Updater process ended with ERROR: 7 Error installing zip file (...)"
What should I do?

MiguelferraZ said:
Hello again. I tried to flash the treble_scorpio file on the provided twrp but I'm getting "Updater process ended with ERROR: 7 Error installing zip file (...)"
What should I do?
Click to expand...
Click to collapse
More informations needed

Psy_Man said:
More informations needed
Click to expand...
Click to collapse
I don't know what can I say more... On twrp, after I do the wipes, when I try to flash "treble_scorpio-20180502-1503.zip" file it shows a red text saying:
"Updater process ended with ERROR: 7
Error installing zip file 'sdcard/treble_scorpio-20180502-1503.zip' "
I can try to flash it again and take a photo if it helps
thanks
EDIT: The photo of the error is in attachment

MiguelferraZ said:
I don't know what can I say more... On twrp, after I do the wipes, when I try to flash "treble_scorpio-20180502-1503.zip" file it shows a red text saying:
"Updater process ended with ERROR: 7
Error installing zip file 'sdcard/treble_scorpio-20180502-1503.zip' "
I can try to flash it again and take a photo if it helps
thanks
EDIT: The photo of the error is in attachment
Click to expand...
Click to collapse
Try flashing THAT firmware before zip

MiguelferraZ said:
I don't know what can I say more... On twrp, after I do the wipes, when I try to flash "treble_scorpio-20180502-1503.zip" file it shows a red text saying:
"Updater process ended with ERROR: 7
Error installing zip file 'sdcard/treble_scorpio-20180502-1503.zip' "
I can try to flash it again and take a photo if it helps
thanks
EDIT: The photo of the error is in attachment
Click to expand...
Click to collapse
The next time you should read carefully the OP, becouse the firmware requirement is stated there.

Great work, @Psy_Man.
Which one of the Generic System Images do you recommend if I want something stable rather than configurable?
Also, being the system images 'A only' that means that the seamless update is still not possible, right?

Development [UNOFFICIAL][RECOVERY] TWRP Recovery 3.7_012 (NEW - A13 AOSP BETA TEST)

TWRP Recovery Project​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads TWRP​Installation (for all MIUI roms )​
Code:
fastboot boot boot_lisa.img
We boot into the recovery and flash the zip through it.
In the Fox folder you will find magisk + RW mount. (installation optional).
We clean the dalvik and reboot into the system
Works:
ADB
Decryption of /data
MTP
Flashing (opengapps, roms, images and so on)
Backup/Restore
USB OTG
CPU temperature
Vibration
A/B partition functions
ADB SIDELOAD
SD-CARD
PS: For AOSP - Please wait
You can donate on the link below:
Donate​​
Spoiler: SCREENSHOT
OrangeFox Recovery | Build in Cloud
Device Tree TWRP
My Telegram
NEW 23/04/2023: OrangeFox BetaTest / a13 - vendorboot recovery AOSP/MIUI
Version Information
Status: Unofficial
Current Release Version: 3.7_012
Release Date: 27-Feb-2023

This is very good news, it was about time that Lisa had a recovery for Android 13.
Thanks for sharing.

What a wonderful new! Previous version for Android 12 where absolutely perfect, I am sure that this update is, or soon will be also an excellent version.
Thank you very very much!
@Dkpost3 :
I would like to send a little contribution, have you a PayPal account?
Edit: I just installed it on my Lisa running Xiaomi.eu miui 13 weekly version (Android 12): It works perfectly on Android 12, the only limit (it's a beta version) is that it can't read the ext storage. I immediately installed the update to Xiaomi.eu update to miui 14 (14.05) stable without formatting. I don't notice any problem till now.
After update the stock recovery came back so I flashed again this new one through fastboot, first I booted boot_lisa.img then I flashed it definitely from inside recovery using the zip file.
At the end I flashed successfully magisk 25.2. I am really impressed with the wonderful work of Dkpost3!

A moment ago
Add bookmark
#125
Excellent recovery. Fully functional. Very good data decryption and OTG. Only the temperature sensor is not working but that's not a big deal. Surely there will be an evolution and it will be fixed. I use MI 11 lite 5g NE (lisa), MIUI 14 global (eea) android 13.

miki1966 said:
A moment ago
Add bookmark
#125
Excellent recovery. Fully functional. Very good data decryption and OTG. Only the temperature sensor is not working but that's not a big deal. Surely there will be an evolution and it will be fixed. I use MI 11 lite 5g NE (lisa), MIUI 14 global (eea) android 13.
Click to expand...
Click to collapse
How do you install it???

quasyl said:
What a wonderful new! Previous version for Android 12 where absolutely perfect, I am sure that this update is, or soon will be also an excellent version.
Thank you very very much!
@Dkpost3 :
I would like to send a little contribution, have you a PayPal account?
Edit: I just installed it on my Lisa running Xiaomi.eu miui 13 weekly version (Android 12): It works perfectly on Android 12, the only limit (it's a beta version) is that it can't read the ext storage. I immediately installed the update to Xiaomi.eu update to miui 14 (14.05) stable without formatting. I don't notice any problem till now.
After update the stock recovery came back so I flashed again this new one through fastboot, first I booted boot_lisa.img then I flashed it definitely from inside recovery using the zip file.
At the end I flashed successfully magisk 25.2. I am really impressed with the wonderful work of Dkpost3!
Click to expand...
Click to collapse
thnks

mohamadreza40 said:
How do you install it???
Click to expand...
Click to collapse
are you having problems?

anyone tried this on MIUI 14 China ROM?

I was almost installing for aosp rom.

Greetings,....thank you very much the twrp sir...working nicely for my phone....i use miui 14 eu and android 13

PaperKing13 said:
anyone tried this on MIUI 14 China ROM?
Click to expand...
Click to collapse
Yes. It works perfectly. I flashed xiaomi.eu rom (based on cn version ) and magisk. I also did a full backup.

I've not been able to download it, but MANY THANKS for your recovery!!
Is there any other place to download it?
yandex complains about the limit of downloads
thanks!

mohamadreza40 said:
How do you install it???
Click to expand...
Click to collapse
First I booted boot_lisa.img then I flashed it definitely from inside recovery using the zip file.

Thank you very much, you did an excellent job I also directly flashed the xiaomi.eu 14.06 zip and the system booted.

miki1966 said:
First I booted boot_lisa.img then I flashed it definitely from inside recovery using the zip file.
Click to expand...
Click to collapse
I don't know how do it ... Can you help me ??

mohamadreza40 said:
I don't know how do it ... Can you help me ??
Click to expand...
Click to collapse
Unlock your bootloader (if it's not already unlocked)
Onstall adb, fastboot and related USB drivers on your PC
Restart your phone in bootloader mode
Open a command line window/terminal emulator on your PC
Change to the adb directory on your PC
Boot TWRP 3.7_012 by running: fastboot boot boot_lisa.img
After TWRP 3.7_012 has booted, check that everything is working, such as that the data partition is mounted correctly and that the touchscreen is working.
Find and select the TWRP 3.7_012 zip on your phone, tap and swipe to install it.
After installation, your phone will automatically reboot into TWRP 3.7_012
Enjoy!

miki1966 said:
Unlock your bootloader (if it's not already unlocked)
Onstall adb, fastboot and related USB drivers on your PC
Restart your phone in bootloader mode
Open a command line window/terminal emulator on your PC
Change to the adb directory on your PC
Boot TWRP 3.7_012 by running: fastboot boot boot_lisa.img
After TWRP 3.7_012 has booted, check that everything is working, such as that the data partition is mounted correctly and that the touchscreen is working.
Find and select the TWRP 3.7_012 zip on your phone, tap and swipe to install it.
After installation, your phone will automatically reboot into TWRP 3.7_012
Enjoy!
Click to expand...
Click to collapse
Thanks my friend

Dkpost3 said:
are you having problems?
Click to expand...
Click to collapse
No just i try it

xabier-bo said:
I've not been able to download it, but MANY THANKS for your recovery!!
Is there any other place to download it?
yandex complains about the limit of downloads
thanks!
Click to expand...
Click to collapse

pls check
CPU temperature * Test Build
Vibration * Test Build
SD-CARD ** Test Build