What is better than the standard CM Recovery:
You can flash another firmware (not the CM)
Normal backup data
You can easily flash the Root
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unlock the bootloader as on CM Wiki instructions
Puth the phone in bootloader mode
In the folder with fastboot put crackling-t0x1.img
Enter the following command:
Code:
fastboot -i 0x2970 erase recovery
then Enter
Code:
fastboot -i 0x2970 flash recovery crackling-t0x1.img
Disconnect the device from the USB and remove the battery. Then replace the battery and restart the device in recovery mode to verify the installation. To do this, hold down the "Volume Down" and "Power".
You can download crackling-t0x1.img from here
http://www91.zippyshare.com/v/60lfsDiR/file.html
Credits to 4PDA Members and especially to FindYanot for developing and allowing posting here
IT is NOT my Work
I've been using this for a while, working very good!
Great to make backups and test ROMs.
There is a problem - this recovery can not mount f2fs partitions
RaidonChrome said:
There is a problem - this recovery can not mount f2fs partitions
Click to expand...
Click to collapse
for my information : which system firmware can mount f2fs partitions?
Dior DNA said:
for my information : which system firmware can mount f2fs partitions?
Click to expand...
Click to collapse
Latest Cyanogen Mod 13 has Linux 3.10, so it should be able to mount f2fs just fine
RaidonChrome said:
Latest Cyanogen Mod 13 has Linux 3.10, so it should be able to mount f2fs just fine
Click to expand...
Click to collapse
thanks, then perhaps latest CM recovery will mount f2fs just fine as well.
Dior DNA said:
thanks, then perhaps latest CM recovery will mount f2fs just fine as well.
Click to expand...
Click to collapse
It does not, in fact it is broken even with ext4 currently
PLEASE HELP, something when wrong
RaidonChrome said:
It does not, in fact it is broken even with ext4 currently
Click to expand...
Click to collapse
Is this the reason why i can't install gapp on my wileyfoxswift and an error appear("e: unable to find partition size for '/recovery") every time i use the wipe.
i upgraded from 12.1 to
13.0-20160127-NIGHTLY-crackling and use the same for recovery but did not work so i installed TWRP and this error occurs -see pics
PLEASE HELP
AromaGapp not working in TWRP
TWRP not working in Aroma Gapp need fix (Aroma is best for me since i can customize install & will not replace CM stock files/app)
In the previous post, i was able to install twrp but i found out on many trial and error that open gapp aroma/full doesn't work both on cm12.1 and cm13.0 using TWRP. Also cm13.0 recovery will not work with open gapp aroma/full.
What works: (haven't tried all version)
On TWRP - i was able to use arm64-pico-6.0 on cm13.0 20160130
On CM Recovery - arm64-aroma-5.1 on cm12.1 20160107
This is based on my experience with the HELP of the awesome people in the forum. I just want to let you know and maybe it will be useful to other noobs like me
noob2016 said:
TWRP not working in Aroma Gapp need fix (Aroma is best for me since i can customize install & will not replace CM stock files/app)
In the previous post, i was able to install twrp but i found out on many trial and error that open gapp aroma/full doesn't work both on cm12.1 and cm13.0 using TWRP. Also cm13.0 recovery will not work with open gapp aroma/full.
What works: (haven't tried all version)
On TWRP - i was able to use arm64-pico-6.0 on cm13.0 20160130
On CM Recovery - arm64-aroma-5.1 on cm12.1 20160107
This is based on my experience with the HELP of the awesome people in the forum. I just want to let you know and maybe it will be useful to other noobs like me
Click to expand...
Click to collapse
Aroma compatibility with TWRP is listed on the Open G-Apps website.
Unfortunately this is the only TWRP we have available to us.
Tamarinde said:
Aroma compatibility with TWRP is listed on the Open G-Apps website.
Unfortunately this is the only TWRP we have available to us.
Click to expand...
Click to collapse
No it is not there is this one https://s.basketbuild.com/devs/beroid/Wileyfox%20Swift%20-%20Crackling/TWRPand yes it works with aroma
Thanks
robin0800 said:
No it is not there is this one https://s.basketbuild.com/devs/beroid/Wileyfox%20Swift%20-%20Crackling/TWRPand yes it works with aroma
Click to expand...
Click to collapse
That is great! i hope i can try i try it but sadly i send it back since the phone was just here for the upgrade. Anyway thanks for the reply here and on my other post.
Much appreciated
robin0800 said:
No it is not there is this one https://s.basketbuild.com/devs/beroid/Wileyfox%20Swift%20-%20Crackling/TWRPand yes it works with aroma
Click to expand...
Click to collapse
Confirmed!!! It works... i used TWRP 3.0. Works on both aroma and pico. Thanks so much!!!!
There is a zip file and recovery. IMG file, any reason why?
image45 said:
There is a zip file and recovery. IMG file, any reason why?
Click to expand...
Click to collapse
The .img file can be flashed by fastboot.
The zip file by any non stock recovery
and yes I do know the image file is contained in the zip but some people may not
robin0800 said:
The .img file can be flashed by fastboot.
The zip file by any non stock recovery
and yes I do know the image file is contained in the zip but some people may not
Click to expand...
Click to collapse
Yes i downloaded the zip file, extracted the recovery.img then flashed by fastboot. I am used to using fastboot commands
So the zip file would function as an update file via a non stock recovery, however once installed would replace the non stock recovery with twrp version!
Related
Main thread + features + install instructions (don't follow) + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Last version can be found here:
https://drive.google.com/folderview?id=0ByEZDplbxwxJVW54a1QzNHVXZ3c&usp=sharing
How to flash
Download tar file from download link
Download odin (3.07 recommended ) just search for it on xda
Open odin
do whats here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
connect device to download mode and hit start
Thanks for this :good::good::good:
This make the Modding more easyer
Downloaded
Installed
Works fine (Install ZIPs, Backup to internal SD Card tested)
Nice Work
Is installation only possible with this Windows tools? Even when an older CWM-based Recovery is installed?
defim said:
Is installation only possible with this Windows tools? Even when an older CWM-based Recovery is installed?
Click to expand...
Click to collapse
I could make recovery installers but m lazy to do so you can take the recovery out of the tar ball and flash it with heimdall if you are using linux
mythi said:
I could make recovery installers but m lazy to do so you can take the recovery out of the tar ball and flash it with heimdall if you are using linux
Click to expand...
Click to collapse
Finally we've full operational recovery.
Thanks.
The Screenshoots works in the Recovery.... but in the Aroma Installer it is not working. Do you know how i can make Screenshoots from the Aroma Installer?
Darkman said:
The Screenshoots works in the Recovery.... but in the Aroma Installer it is not working. Do you know how i can make Screenshoots from the Aroma Installer?
Click to expand...
Click to collapse
did you place aroma installer zip on the correct place on the phone
mythi said:
I could make recovery installers but m lazy to do so you can take the recovery out of the tar ball and flash it with heimdall if you are using linux
Click to expand...
Click to collapse
Thanks, I've a Windows but the USB is a little unstable...
The Aroma Installer works fine
I want only make Screenshoots from the Aroma Installer
I have to say, this is very good, still concerned that it is an unsupported recovery now, though I did see that Philz updated sources today with a fixed lib file. Good work @mythi. Are you going to update this or does it matter?
Pkt_Lnt said:
I have to say, this is very good, still concerned that it is an unsupported recovery now, though I did see that Philz updated sources today with a fixed lib file. Good work @mythi. Are you going to update this or does it matter?
Click to expand...
Click to collapse
Yeah ... Sure when the weekend comes :~)
mythi said:
Yeah ... Sure when the weekend comes :~)
Click to expand...
Click to collapse
Good, I get errors in Philz now second time using it. Here is a link to the post.
http://forum.xda-developers.com/showpost.php?p=55842367&postcount=5567
Pkt_Lnt said:
Good, I get errors in Philz now second time using it. Here is a link to the post.
http://forum.xda-developers.com/showpost.php?p=55842367&postcount=5567
Click to expand...
Click to collapse
Should be fixed on next release but m not facing issues with it anyway .. Twrp is gonna be updated to latest version too
@Pkt_Lnt the latest version doesn't boot no matter what i do , the libguitouch.a is a binary file which cannot be edited easily atleast through hex-editing , i will look on to some help but i don't gurntee it booting as Mr Philz dropped the support :crying:
mythi said:
@Pkt_Lnt the latest version doesn't boot no matter what i do , the libguitouch.a is a binary file which cannot be edited easily atleast through hex-editing , i will look on to some help but i don't gurntee it booting as Mr Philz dropped the support :crying:
Click to expand...
Click to collapse
Why would he post the fact that it needs fixed and the fix in that thread then? I know he stopped support due to work, but then he must feel it important enough to post about it?
Hi guys. Does anyone know if backup and restore works on 4.4.2 kitkat with this recovery?
I'll answer my own question. Yes it does, as I did a restore from my backup last night making it, imho the best recovery for our device.
Sent from my GT-I9295 using Tapatalk 2
dazzawill said:
I'll answer my own question. Yes it does, as I did a restore from my backup last night making it, imho the best recovery for our device.
Sent from my GT-I9295 using Tapatalk 2
Click to expand...
Click to collapse
CWM is very outdated, brain dead (it will kill root on zip flashes) and unsupported. Philz is a better choice if you like that kind of recovery, but it is abandoned as well. TWRP is a better choice if you grab the one from the Multi-ROM thread. http://forum.xda-developers.com/gal...mod-multirom-v30-multirom-twrp-i9295-t2962492
philz touch builds are currently broken on cm12 so there isnt much todo on cm12 , will see if its same on cm11
Am i the only one with following problem?
When i turn off the phone and plug in the power cable, the Stock charging animation appears but its freezed. After 15 seconds a smaler charging animation appears. Next thing is: During this, i cant use the power button to power on the phone. The phone restarts, but it will go back into the charging animation. I must unplug the power cable to boot the phone into android.
I think this is a problem of CWM/PhilZ ?!
PhilZ Touch 6.57.9 CWM 6.0.5.1 with CM12 official nightly.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TeamWin's TWRP Touch Recovery For Lenovo A7000-a
SCREENSHOT ON ATTACHMENT
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. TWRP also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
This TWRP was originally formed to work on Lenovo K3 Note. After Denis work on K3 Note, I wanted to make it that would work on Lenovo A7000-a to. Today TWRP is the leading custom recovery for Android phones.
A custom recovery is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom “ROM” like OmniROM
You can find the source code for TWRP at https://github.com/omnirom/android_bootable_recovery/
Flashing Instructions :
To install recovery images use Flashify / Rashr / TWRP Manager from Play Store or flash in your current recovery:
1. Go to install, find and select the Images... button.
2. Browse to the image that you downloaded and select it.
3. Choose recovery and swipe to flash.
Download :
TWRP : Mod Edit: Link Removed
Remember to do backup of your current recovery before installing.
XDA:DevDB Information
TWRP 3.0.2-8, TWRP for the Lenovo A7000
Contributors
HDHR, sandeep.sethi, Denis_PDA
Version Information
Status: Stable
Created 2016-10-29
Last Updated 2017-02-19
Mod Edit: Thread Closed
Changelog
TWRP 3.0.2-8 :
~Upgraded to TWRP 3.0.2-8 (Base, Security Patch,ETC.)
~Minor fixes
~Added ability to set system.img
=>TWRP -> Install -> Install image -> system.img -> System Image -> Swipe to confirm Flash.
~Optimized OTG FS support FAT32, exFAT, NTFS
~Flashable installation supported
TWRP 3.0.2-6 :
~Updated to TWRP 3.0.2-6 (Security Patch,Base,ETC.)
~Fixed code name error
~Backup and Restore Improvement
~Lot of Improvement
TWRP 3.0.2-5 :
~Initial release
Detailed Changelogs Here :
https://github.com/omnirom/android_bootable_recovery/commits/android-6.0
Reserved
How is it possible ? Flashing a recovery from another recovery ? Doesn't the recovery partition get overwritten?
[Thanks though for the new version]
tanish2k09 said:
How is it possible ? Flashing a recovery from another recovery ? Doesn't the recovery partition get overwritten?
[Thanks though for the new version]
Click to expand...
Click to collapse
Its will overwrite the old one with the new one... You can update via TWRP to
1. Boot to TWRP
2. Select install files
3. Select install image
4. Then select recovery image
5. Select install on recovery
6. Finish and go to reboot option and select reboot to recovery
6. Tadaaa your new Recovery installed
Themes support?
tanish2k09 said:
Themes support?
Click to expand...
Click to collapse
Support :fingers-crossed:
Thanks!
Ceco85 said:
Thanks!
Click to expand...
Click to collapse
Your welcome
What about compatibility of old backup created in 3.0.2-1
CyberDeat said:
What about compatibility of old backup created in 3.0.2-1
Click to expand...
Click to collapse
It I'll not detect backup from old TWRP,you need to backup files on new TWRP and just move your old backup to new folder one
You ported it or built it from source?
tanish2k09 said:
You ported it or built it from source?
Click to expand...
Click to collapse
Build from source on k3 note ported to a7000 :3
How to install on a non-rooted MM A7000-a?
jocph said:
How to install on a non-rooted MM A7000-a?
Click to expand...
Click to collapse
Use SP Flash tools
Thanks for replying. Can you give the steps? Doesn't spflashtool need a scatterfile? Sorry but I'm not very familiar with spflashtool.
Thnx HDHR for the recovery :good:
---------- Post added at 03:37 PM ---------- Previous post was at 03:21 PM ----------
jocph said:
Thanks for replying. Can you give the steps? Doesn't spflashtool need a scatterfile? Sorry but I'm not very familiar with spflashtool.
Click to expand...
Click to collapse
In sp flash tool...for flashing Recovery
1-Install lenovo driver
2-open sp flash tool by administration
3-load scatter file,
4-select recovery only (also select recovery u have downloaded)
5-check in option that dal dal option is tick
6- click on download
7-switch off ur phone...take out battery for 5 sec..reinsert battery and connect ur phone with pc then
It will automatically flash the recovery after u see a download ok popup window disconnect ur phone and u have successfully flash TWRP recovery
Where can I find the scatterfile for this TWRP image? The download only gives the img file. My MM A7000-a is not rooted and does not have custom recovery yet.
i flashed a theme on my old twrp.....the theme got caried on to this one......
i am unable to remove it....plez help.....
there is no folder of twrp in my sd card....
jocph said:
Where can I find the scatterfile for this TWRP image? The download only gives the img file. My MM A7000-a is not rooted and does not have custom recovery yet.
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B5os0Tgr4idrbTA1WkxhUHB6TzA/view
Scatter file...there is also a old TWRP dont use it....
[OFFICIAL ][RECOVERY] [20-08-2017] TWRP 3.2.3-0 - TeamWin Recovery Project
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WHAT IS TWRP?
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
Read more about TWRP here: https://twrp.me/about/
What's new in 3.2.1-0:
* minui fixes (cryptomilk) * Better android-8.0 compatibility in ROM trees (Dees_Troy) * Fix missing library in android-8.0 (nkk71) * Fix inconsistent SDCard naming (DevUt) * Default to TWRP restore instead of adb backup restore to fix restore on fresh TWRP boot (jlask)
INSTALLATION:
Most devices can be updated quickly and easily within TWRP if you already have version 2.8.4.0 or higher installed
1) Download the latest version above
2) Reboot to TWRP
3) Hit Install and tap the "Install Image" button in the lower right
4) Browse to the location of the TWRP image on your device and select it
5) Select recovery from the partition list and swipe to flash
To install from SP Flash Tools:
1) Download scatter file attached to this post
2) Load scatter file into SPFT
3) Plug USB cable into device and computer
4) Press download in SPFT
5) Reboot device
To install from offical TWRP App (Requires a rooted device.)
1) Download Official TWRP App from playstore
2) Choose the device (elephone P9000 -- p9000)
3) Install it
BUGS:
If you have an issue, the first step is to post a recovery log so we can determine the cause of the issue. This is done in recovery using Advanced -> Copy Log, or adb pull /tmp/recovery.log. Once a log is uploaded we can determine how best to proceed.
Other Projects:
Make sure to also check my dualbooting guide here: https://forum.xda-developers.com/elephone-p9000/how-to/guide-dualboot-patcher-t3608213
Thanks to:
(me) Ruben Craveiro
bigbiff
Dees_Troy
Leskal
Deepflex
Tribual
XDA:DevDB Information
[OFFICIAL][LATEST][RECOVERY] TWRP 3.2.1 for Elephone P9000, Tool/Utility for the Elephone P9000
Contributors
Ruben Craveiro
Version Information
Status: Stable
Current Stable Version: 3.2.1
Stable Release Date: 2017-08-10
Device Tree
[url]https://github.com/Ruben7173/android_device_elephone_p9000[/URL]
Created 2017-08-20
Last Updated 2018-06-03
Great work, however, I can't find it in twrp app from playstore. Will this be updated soon?
What's the difference between an installation from twrp-App and flashtools?
TheMRK said:
Great work, however, I can't find it in twrp app from playstore. Will this be updated soon?
What's the difference between an installation from twrp-App and flashtools?
Click to expand...
Click to collapse
currently due to an error i made while uploading our device info i set the file to go over to twrp main page, i have already sent out a fix but needs review once its approved, it should be up and running to work with the app
Ruben Craveiro said:
currently due to an error i made while uploading our device info i set the file to go over to twrp main page, i have already sent out a fix but needs review once its approved, it should be up and running to work with the app
Click to expand...
Click to collapse
That's good news.
But again, what's the difference between an installation of twrp from its app and via flashtools. Is it in the end the same? Or do you recommend one of both methods?
TheMRK said:
That's good news.
But again, what's the difference between an installation of twrp from its app and via flashtools. Is it in the end the same? Or do you recommend one of both methods?
Click to expand...
Click to collapse
If you already have root, i recommend the app, since its an easier to way to download, install/update the recovery, but if you dont have root you need at least once to install it from flash tools, since the app is not an option yet for the moment(its not on devices list, but you can manually install it), you can download the image and flash it through the app (if you have root, that is) if you dont have roog you need to use flash tools
I have P9000 with Nougat on it, version Elephone_P9000_20170418 and I'm trying to install TWRP 3.0.2 with SPFlash Tool, I only check recovery and flash it, but when I start the phone in recovery mod displays only show "no command". Is there any scatter file for this version, and what should I do to flash it through SPFlash Tool?
tonivet said:
I have P9000 with Nougat on it, version Elephone_P9000_20170418 and I'm trying to install TWRP 3.0.2 with SPFlash Tool, I only check recovery and flash it, but when I start the phone in recovery mod displays only show "no command". Is there any scatter file for this version, and what should I do to flash it through SPFlash Tool?
Click to expand...
Click to collapse
Any scatter file from one of our stock roms should do the trick, just put it alongside the downloaded twrp image, and flash it, also twrp 3.0.2 is not official, unlike this one, this one will be able to be updated directly through the twrp app once the issue is fixed.
Ruben Craveiro said:
(...) this one will be able to be updated directly through the twrp app once the issue is fixed.
Click to expand...
Click to collapse
Without root then or is it always required for this app?
TheMRK said:
Without root then or is it always required for this app?
Click to expand...
Click to collapse
the app will always require root, but you can always use magisk with the certification bug fix and magisk hide so that you can have the device certified and still be rooted. (if you dont know what certification is used for, its to allways allow the usage of android pay)
Thanks for your work
The onely thing that doesn't work for me is OTG.
Stylogey said:
Thanks for your work
The onely thing that doesn't work for me is OTG.
Click to expand...
Click to collapse
Thanks for the log but next time use pastebin so you dont make a huge post (and i have copied the log and later on ill see it, so you can edit and delete the log from post so it doesnt fill the thread, thanks)
Good day!
My apologies as I am new to this, but I can't seem to find the link to the scatter file that you mention. Could you help me, please?
Thanks in advance, and sorry for the trouble.
CrimsonWind said:
Good day!
My apologies as I am new to this, but I can't seem to find the link to the scatter file that you mention. Could you help me, please?
Thanks in advance, and sorry for the trouble.
Click to expand...
Click to collapse
its available in any stock rom that is flashable with sp flash tools
You can try to compare your sources with those of Jonny. The TWRP versions which he build worked for me.
Edit: I tried to fix it by myself and after I used another kernel (Darksense kernel) as prebuild kernel it worked.
TheMRK said:
Great work, however, I can't find it in twrp app from playstore. Will this be updated soon?
What's the difference between an installation from twrp-App and flashtools?
Click to expand...
Click to collapse
Its updated, now its available on twrp app
Ruben Craveiro said:
Its updated, now its available on twrp app
Click to expand...
Click to collapse
That's great. I've just checked with my device and can verify it works well. Thanks for your efforts.
Ruben Craveiro said:
Its updated, now its available on twrp app
Click to expand...
Click to collapse
Works just perfectly. Good job with the app part, I had the app for a long time and our Elephone never apeared, now it is just perfect. Thanks
"Download scatter file attached to this post"
Where can I download the scatter file? There is no attachment.
Thank you!
mano2 said:
"Download scatter file attached to this post"
Where can I download the scatter file? There is no attachment.
Thank you!
Click to expand...
Click to collapse
sorry, didnt add it yet, and im away from a computer, just get the scatter file from any stock rom
Ruben Craveiro said:
sorry, didnt add it yet, and im away from a computer, just get the scatter file from any stock rom
Click to expand...
Click to collapse
I didn't quite understand what are scatter files for, now I did some research and downloaded the most up-to-date stock ROM and now everything is fine!
Thank you for your help!
TWRP
This project provides the TWRP recovery for for the Sony Xperia XZ1 Compact (lilac).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES
File-Based Encryption (FBE) support
EXT4 support
F2FS support
EXFAT support
Provides unzip
Additional languages
This recovery will use the security patch level from the system partition to decrypt data. It should not be tied to a security patch level anymore.
DOWNLOAD
Make sure you download the .img and corresponding .asc.txt file (see INTEGRITY)!
You can always find the latest version of the recovery HERE.
INTEGRETY
The recovery images also come with an GPG armor file (.asc). With that file you verify that the image I created hasn't been altered.
How do you do that?
Download my gpg keyring here: https://cryptomilk.org/gpgkey-8DFF53E18F2ABC8D8F3C92237EE0FC4DCC014E3D.gpg.
Download the recovery.img and recovery.img.asc.txt file
Rename the recovery.img.asc.txt file to recovery.img.asc
Verfiy the signature using the following command:
Code:
gpg --keyring ./gpgkey-8DFF53E18F2ABC8D8F3C92237EE0FC4DCC014E3D.gpg --verify recovery.img.asc
A good tutorial is: How to verify signatures for packages from the Tor Project.
SECURITY ADVICE
Don't flash ROMs or Magisk modules which set SELinux to permissive or you welcome malware on your device!
XDA:DevDB Information
recovery_twrp_sony_lilac, Tool/Utility for the Sony Xperia XZ1 Compact
Contributors
modpunk, Dees_Troy
Source Code: https://github.com/cryptomilk/android_device_sony_lilac
Version Information
Status: Stable
Current Stable Version: 3.3.1-0
Stable Release Date: 2019-09-16
Created 2017-11-18
Last Updated 2019-09-16
Nice work!
What does the STOCK addition in the title mean?
Can't I flash for example LOS with it?
Nice work! So does that mean that we finally can root our xz1 compact?
And currently this TWRP is not working for security patch November, right? I mean build nr: 47.1.A.5.51
4rz0 said:
What does the STOCK addition in the title mean?
Can't I flash for example LOS with it?
Click to expand...
Click to collapse
RTFM!
aikon96 said:
Nice work! So does that mean that we finally can root our xz1 compact?
And currently this TWRP is not working for security patch November, right? I mean build nr: 47.1.A.5.51
Click to expand...
Click to collapse
No, I need to create one for November. Will do that soon.
modpunk said:
RTFM!
Click to expand...
Click to collapse
I did read the OT, if that's what you mean, but it doesn't answer my question.
If the LOS I want to flash comes with the same security patch level, would it work?
4rz0 said:
I did read the OT, if that's what you mean, but it doesn't answer my question.
If the LOS I want to flash comes with the same security patch level, would it work?
Click to expand...
Click to collapse
There is no limitation in flashing. However there is no LOS you can flash yet ...
works perferct! thank you :good:
I got an XZ1. Any chance to get TWRP for it (for testing)?
Could someone please test https://xor.cryptomilk.org/android/twrp-lilac/twrp-3.1.1-0-lilac-patchlevel-2017-11-05.img
TWRP
modpunk said:
Could someone please test
Click to expand...
Click to collapse
ok. I'll test it
modpunk said:
Could someone please test https://xor.cryptomilk.org/android/twrp-lilac/twrp-3.1.1-0-lilac-patchlevel-2017-11-05.img
Click to expand...
Click to collapse
I will indeed test too juhuuu...
it flashes okay via fastboot, and twrp is also working. except for format option under wipe, when typing 'continue' it seems like it doesn't show the inputs, only the last letter 'e'
anyway after i flashed the twrp, i booted it up, and mounted everything except for otg. and then of course i flashed magisk.zip (latest v14) and it also succeeded
but then when i reboot from twrp, it stucks at sony logo, meaning default bootanimation doesn't kick in, and i patiently waited for like 10-15 min
so i assume it's not working. i even tried with a userdebug and regular user build 47.1.A.5.51
now i will try just to boot the twrp without flashing it and then flash magisk.zip while it's booted up via fastboot to see if it boots up normally
a) Do you have your partition encrypted and could you mount it, so it asked for a password?
b) TWRP writes a log file you can download adb pull /tmp/recovery.log
c) adb logcat is also working
Note that there is currently no upstream TWRP developement for Oreo ongoing. I just wrote several hacks to get it working.
modpunk said:
a) Do you have your partition encrypted and could you mount it, so it asked for a password?
b) TWRP writes a log file you can download adb pull /tmp/recovery.log
c) adb logcat is also working
Note that there is currently no upstream TWRP developement for Oreo ongoing. I just wrote several hacks to get it working.
Click to expand...
Click to collapse
A: it does not ask for password upon bootup so i guess it's not encrypted in that way
B attached here
C is there any specific logcat you want, like error or fatal level etc.
Question just to be clear: do we have to update twrp for evry new securitypatch?
To decrypt the /data partion on a stock ROM, yes you do.
Hi modpunk,
Ur a true star...****
I just want to ask a couple of question's.
Does the bootloader have to be unlocked in order to flash this....?
I have had a Z3 Compact and got it rooted with bootloader locked and also a Z5 Compact using munjen setup.
Install TWRP on it Flashed SuperSU using TWRP was best thing i did.
Do you have a step by step guide how to flash this. I would love to test it for you.
When you flash is it using munjen flashtool...?
Thanks Sham
UPDATE
TRWP is working actually, just figured out that it's magisk that get the phone not to boot, bith 14 and 14.5
and latest supersu both the xperia one and the regular one v.2.82 fails, give error "unzip fail, no proper recovery etc."
Now for fun i will load it up with userdebug firmware and see if i can make it manually root with the "angela" method
TWRP Recovery Project
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads TWRPInstallation (for all MIUI roms )
Code:
fastboot boot boot_lisa.img
We boot into the recovery and flash the zip through it.
In the Fox folder you will find magisk + RW mount. (installation optional).
We clean the dalvik and reboot into the system
Works:
ADB
Decryption of /data
MTP
Flashing (opengapps, roms, images and so on)
Backup/Restore
USB OTG
CPU temperature
Vibration
A/B partition functions
ADB SIDELOAD
SD-CARD
PS: For AOSP - Please wait
You can donate on the link below:
Donate
Spoiler: SCREENSHOT
OrangeFox Recovery | Build in Cloud
Device Tree TWRP
My Telegram
NEW 23/04/2023: OrangeFox BetaTest / a13 - vendorboot recovery AOSP/MIUI
Version Information
Status: Unofficial
Current Release Version: 3.7_012
Release Date: 27-Feb-2023
This is very good news, it was about time that Lisa had a recovery for Android 13.
Thanks for sharing.
What a wonderful new! Previous version for Android 12 where absolutely perfect, I am sure that this update is, or soon will be also an excellent version.
Thank you very very much!
@Dkpost3 :
I would like to send a little contribution, have you a PayPal account?
Edit: I just installed it on my Lisa running Xiaomi.eu miui 13 weekly version (Android 12): It works perfectly on Android 12, the only limit (it's a beta version) is that it can't read the ext storage. I immediately installed the update to Xiaomi.eu update to miui 14 (14.05) stable without formatting. I don't notice any problem till now.
After update the stock recovery came back so I flashed again this new one through fastboot, first I booted boot_lisa.img then I flashed it definitely from inside recovery using the zip file.
At the end I flashed successfully magisk 25.2. I am really impressed with the wonderful work of Dkpost3!
A moment ago
Add bookmark
#125
Excellent recovery. Fully functional. Very good data decryption and OTG. Only the temperature sensor is not working but that's not a big deal. Surely there will be an evolution and it will be fixed. I use MI 11 lite 5g NE (lisa), MIUI 14 global (eea) android 13.
miki1966 said:
A moment ago
Add bookmark
#125
Excellent recovery. Fully functional. Very good data decryption and OTG. Only the temperature sensor is not working but that's not a big deal. Surely there will be an evolution and it will be fixed. I use MI 11 lite 5g NE (lisa), MIUI 14 global (eea) android 13.
Click to expand...
Click to collapse
How do you install it???
quasyl said:
What a wonderful new! Previous version for Android 12 where absolutely perfect, I am sure that this update is, or soon will be also an excellent version.
Thank you very very much!
@Dkpost3 :
I would like to send a little contribution, have you a PayPal account?
Edit: I just installed it on my Lisa running Xiaomi.eu miui 13 weekly version (Android 12): It works perfectly on Android 12, the only limit (it's a beta version) is that it can't read the ext storage. I immediately installed the update to Xiaomi.eu update to miui 14 (14.05) stable without formatting. I don't notice any problem till now.
After update the stock recovery came back so I flashed again this new one through fastboot, first I booted boot_lisa.img then I flashed it definitely from inside recovery using the zip file.
At the end I flashed successfully magisk 25.2. I am really impressed with the wonderful work of Dkpost3!
Click to expand...
Click to collapse
thnks
mohamadreza40 said:
How do you install it???
Click to expand...
Click to collapse
are you having problems?
anyone tried this on MIUI 14 China ROM?
I was almost installing for aosp rom.
Greetings,....thank you very much the twrp sir...working nicely for my phone....i use miui 14 eu and android 13
PaperKing13 said:
anyone tried this on MIUI 14 China ROM?
Click to expand...
Click to collapse
Yes. It works perfectly. I flashed xiaomi.eu rom (based on cn version ) and magisk. I also did a full backup.
I've not been able to download it, but MANY THANKS for your recovery!!
Is there any other place to download it?
yandex complains about the limit of downloads
thanks!
mohamadreza40 said:
How do you install it???
Click to expand...
Click to collapse
First I booted boot_lisa.img then I flashed it definitely from inside recovery using the zip file.
Thank you very much, you did an excellent job I also directly flashed the xiaomi.eu 14.06 zip and the system booted.
miki1966 said:
First I booted boot_lisa.img then I flashed it definitely from inside recovery using the zip file.
Click to expand...
Click to collapse
I don't know how do it ... Can you help me ??
mohamadreza40 said:
I don't know how do it ... Can you help me ??
Click to expand...
Click to collapse
Unlock your bootloader (if it's not already unlocked)
Onstall adb, fastboot and related USB drivers on your PC
Restart your phone in bootloader mode
Open a command line window/terminal emulator on your PC
Change to the adb directory on your PC
Boot TWRP 3.7_012 by running: fastboot boot boot_lisa.img
After TWRP 3.7_012 has booted, check that everything is working, such as that the data partition is mounted correctly and that the touchscreen is working.
Find and select the TWRP 3.7_012 zip on your phone, tap and swipe to install it.
After installation, your phone will automatically reboot into TWRP 3.7_012
Enjoy!
miki1966 said:
Unlock your bootloader (if it's not already unlocked)
Onstall adb, fastboot and related USB drivers on your PC
Restart your phone in bootloader mode
Open a command line window/terminal emulator on your PC
Change to the adb directory on your PC
Boot TWRP 3.7_012 by running: fastboot boot boot_lisa.img
After TWRP 3.7_012 has booted, check that everything is working, such as that the data partition is mounted correctly and that the touchscreen is working.
Find and select the TWRP 3.7_012 zip on your phone, tap and swipe to install it.
After installation, your phone will automatically reboot into TWRP 3.7_012
Enjoy!
Click to expand...
Click to collapse
Thanks my friend
Dkpost3 said:
are you having problems?
Click to expand...
Click to collapse
No just i try it
xabier-bo said:
I've not been able to download it, but MANY THANKS for your recovery!!
Is there any other place to download it?
yandex complains about the limit of downloads
thanks!
Click to expand...
Click to collapse
pls check
CPU temperature * Test Build
Vibration * Test Build
SD-CARD ** Test Build