HUI-FIE Model S07 problems - MTCB Android Head Units Q&A

HUI-FIE Model S07
I upgraded my SKODA CAR head unit HUI-FIE Model S07 , to MCU Version MTCB-KGL4-V2.55
Android version 4.4.4_30062015, kernel version 3.0.36+ [email protected]#226
Build number rk3066-eng4.4.430062015.19:04:07
Cpu armv7 1.6GHZ(X2)
MEMORY 512 Mb
I have the following problems
1- The reception of the FM radio became poor quality
2- The mic of the unit when connected my Bluetooth to my I phone 5s became distorted to the other call party
3- Wifi reception disconnected every now and then
what shall i do ?

Try install the previous MCU version if you have it.

kufu said:
Try install the previous MCU version if you have it.
Click to expand...
Click to collapse
if I do not have it where to find it ?

Try here: https://mega.nz/#F!zRRkVThb!DYBC0LRK-o34ZxDObQo73Q!SZBwgZYa

Related

Just bought a Android Head Unit. Need a little help.

I recently just bought a Android Head unit. I've seen videos and pictures of what seems to be the same head unit on the outside. But I know that the actual software and version of Android may very on different models. I'm so lost into finding what model or even what MCU version I have. I'm wanting to know what model and MCU version I have. I would like to root the device and put a custom rom onto it. Seems how I don't like how the device is setup from the factory. Any help is appreciated Thanks (also new user and it says I can't post outside links so I cannot provide pictures of the unit that I attended too)
Here is the information I have gathered from the Head Unit:
CPU Information: Cortex-A9 Dual Core
RAM information: DDR3 1GB
Android version: 4.4.4
MCU version: 4.3.14-1-10-610101-150525
System version: 2.9.5_20150722
Zornox said:
I recently just bought a Android Head unit. I've seen videos and pictures of what seems to be the same head unit on the outside. But I know that the actual software and version of Android may very on different models. I'm so lost into finding what model or even what MCU version I have. I'm wanting to know what model and MCU version I have. I would like to root the device and put a custom rom onto it. Seems how I don't like how the device is setup from the factory. Any help is appreciated Thanks (also new user and it says I can't post outside links so I cannot provide pictures of the unit that I attended too)
Here is the information I have gathered from the Head Unit:
CPU Information: Cortex-A9 Dual Core
RAM information: DDR3 1GB
Android version: 4.4.4
MCU version: 4.3.14-1-10-610101-150525
System version: 2.9.5_20150722
Click to expand...
Click to collapse
Unfortunately you are in the wrong section. You don't have a MTCB unit. Your MCU looks like AN21U, you might want to check that thread for help on your unit.

Joying 10.1 looking for latest stock firmware or 6.0.1 rom

So I've had my 10.1 joying Head unit for a year recently put it back in my Honda it is not the 2gb model it's the 1gb
Pretty sure it's on 4.4.4 malaysk rom
Have we a stock lollipop update direct from joying yet ? Or a 6.0.1 Rom that can be applied right from 4.4.4 via flash drive
I'm trying to update to new stuff
But I can't seem to find any links to the one I need . Last time I took advice from someone they linked me to a pumpkin firmware and bricked my old JY 10.1 unit
Thanks in advance
Sent from my XT1635-02 using XDA-Developers Legacy app
There is no Android 6 for MTCB or MTCC units, 5.1.1 is the latest version.
There are also no 2Gb RAM MTCB/C untis, all were 1Gb, although youc anupgrade this yourself.
Problems with my joying radio
hello friends, I bought a radio joying for my renault kadjar, version of android 6.0.1, intel atom processor, but I have 2 problems.
1. the am / fm radio has no sound, sometimes it sounds but most of the time it does not make any sound.
2. the steering wheel control does not work, the canbus is connected but when I try to configure it I can not.
If someone can help me, I would be very grateful.

mtcd_kld updated mcu

i have a mtcd with kld v2.52 i cant find an updated mcu from kld anywhere all i found was one for mtcb. does anyone know if any of the others in the list for mtcd are compatable with kld.
raekwonsr said:
i have a mtcd with kld v2.52 i cant find an updated mcu from kld anywhere
Click to expand...
Click to collapse
The latest version I found here. Within the folder "All dmcu for PX3, PX5, Intel Sofia3g" you can find a KLD folder. I just noticed it contains KLD MTCE 2.78 too. I personally only successfully tried 2.65d and 2.73 recently.
Can the "MTCE" MCUs be used with any MTCD firmware?
bradsm87 said:
Can the "MTCE" MCUs be used with any MTCD firmware?
Click to expand...
Click to collapse
Yes, MTCD and MTCE is the same thing; it's just a software upgrade. Any MTCD device can be upgraded to MTCE MCU version.
SkyBeam2048 said:
Yes, MTCD and MTCE is the same thing; it's just a software upgrade. Any MTCD device can be upgraded to MTCE MCU version.
Click to expand...
Click to collapse
Is there any noticeable difference? There must be something to justify the change of name from MTCD to MTCE.
bradsm87 said:
Is there any noticeable difference? There must be something to justify the change of name from MTCD to MTCE.
Click to expand...
Click to collapse
No.
Manufacturers never released any changelogs for MCU firmware. So we don't know what the changes are. Though there is a thread targeting to analyze the MCU here.
As of now the only thing we know that starting somewehre with 2.6x versions the MCU was renamed from MTCD to MTCE with no known hardware modification and as of our current knowledge every MTCDe unit is compatible to MTCE firmware. So it looks like they probably really just changed the name for no good reason.
I can confirm 2.78 works perfectly. I didn't even lose any MCU settings and I didn't have the CFG file on the SD Card.
bradsm87 said:
I can confirm 2.78 works perfectly. I didn't even lose any MCU settings and I didn't have the CFG file on the SD Card.
Click to expand...
Click to collapse
Hi. I installed the 2.78 too, but i have no clear differences with 2.73 . There is a changelog for this mcu or for the old mcu update? If yes you know where i can find it?
thanks
Hi. I have a MTCE_WWW_V2.78_1 MCU which appears to be KLD. It's running android 8.0. I really am looking forward to find a way to root my device (formerly - even if uninteresting but for information - sold as a Eonon GA2170). I saw in the link you posted, SkyBeam2048, that there was inside "Rockchip PX5 Oreo 8.0" folder a rar file named UpdateROOT.rar. After quick search, I found out a 4pda.ru thread mentionning that this root method was based on GS 20180118 firmware (oreo 8.0, obviously). Do you think I could use it on my own device to gain root access ?
Will the new MCU kld v2xx work with kld1.9.7 mtcd
If you could post a link and let me know if I can do this or not thank you
Dominic62808 said:
Will the new MCU kld v2xx work with kld1.9.7 mtcd
If you could post a link and let me know if I can do this or not thank you
Click to expand...
Click to collapse
yes, it will be
P.S.
last MCU version for KLD is MTCE-V2.88b now
upgrade from MTCB-KLD-V2.20
cs-x(RU) said:
yes, it will be
P.S.
last MCU version for KLD is MTCE-V2.88b now
Click to expand...
Click to collapse
I am new to the firmware updates and wish to know if my android stereo has an firmware update I can use. I bought the truck last month and I noticed the firmware is from 2014, is there anything I should do for better performance? it is so slow when booting. thanks in advance
---------- Post added at 07:29 AM ---------- Previous post was at 07:25 AM ----------
tpizana12 said:
I am new to the firmware updates and wish to know if my android stereo has an firmware update I can use. I bought the truck last month and I noticed the firmware is from 2014, is there anything I should do for better performance? it is so slow when booting. thanks in advance
Click to expand...
Click to collapse
MTCB-KLD-V2.2
model S07
Android Version: 4.2.2_23122014
Kernal version: [email protected] #157
Tue Dec 23 08:59:37 CST 2014
Build Number: rk30sdk-eng4.4.43122014.08:59:24
tpizana12 said:
I am new to the firmware updates and wish to know if my android stereo has an firmware update I can use. I bought the truck last month and I noticed the firmware is from 2014, is there anything I should do for better performance? it is so slow when booting. thanks in advance
---------- Post added at 07:29 AM ---------- Previous post was at 07:25 AM ----------
MTCB-KLD-V2.2
model S07
Android Version: 4.2.2_23122014
Kernal version: [email protected] #157
Tue Dec 23 08:59:37 CST 2014
Build Number: rk30sdk-eng4.4.43122014.08:59:24
Click to expand...
Click to collapse
Mtcb, see mtcb forums for options. Take your time.
Need an update for MCU Version
MTCB-KLD7-V2.81
Android version 4.4.4_21032
thanks

S07 nav radio

I have a S07 navigation radio which the prevoius owner updated the incorrect Lollipop firmware update. Can you please assist?
MCU version MTCB-GS-V2.73
Android version 4.4.4
Build RK3188-ENG 4.4.4
CPU ARM CORTEX-A9.
Regards Karsten.
I managed to figure out how to reflash the firmware from you & it works great. Only problem is the hard buttons on the sides of the radio do not have the correct functions.
Any ideas what could be the problem?
Regards Karsten.

Erisin (ES6291V) PX6 MCU STM32

Hello,
My name is Hans and I am from Germany. My english is not the best, but I try very hard.
I have a Erisin ES6291V PX6 4GB RAM 32GB memory. Unfortunately, this is not a device with MTCx MCU, but with STM32, so I can not use any of the popular custom ROMs (Hal9k, Malaysk). Is this right?
Is there any custom roms for this device or is it to be expected that will be available in the future?
Here I still have the original firmware from the device.
Unfortunately, I can not set the link here yet.
Android Version: 9
Hardware- Information: RK3399 ROM 23GB - LPDDR4 4GB - 1024x600
Kernel Version: Linux 4.4.167+ - Wed Sept 4 11:03:43 CST 2019
OS Version: HC1E0201-P0N-1.1.4.3.1 - BLINK161 - 20190904 - 701F
MCU Version: STM32-20190828-11-KC6-30
Thanks
I plan to buy the same HU with you and concern about the speed & quality. Is it good? Any issue with hardware or software?
mrVuHoa said:
I plan to buy the same HU with you and concern about the speed & quality. Is it good? Any issue with hardware or software?
Click to expand...
Click to collapse
Suggest avoiding and looking for an MTCD/E PX6 - based on number of threads, modified ROMs, recovery from brick and extensive info.
Hi Folks!
I got Erisin HU (ES6291V)
Detailed info is here
I was able to enable 48 hours sleep mode in factory settings menu. But when I set, the HU become unstable and sometimes does not start (black screen, have to reset), or does not go to sleep and suck the accumulator of the car. Is there a fix for this problem? Do you have got a MCU and/or firmware update for it? What is your advice?
Thank you in advance!
Not MTCB, suggest posting in Android Head units forum.

Categories

Resources