Related
A modified xposed installer and framework for nougat is now available thanks to the Purify os team and rovo
https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
Follow the link above.
1. Make backups, twrp/titanium
2. Install the modified xposed installer first, must be done first!
https://forum.xda-developers.com/devdb/project/?id=13191#downloads
Use the top one on the list it may get updated
3. Next download the modified xposed framework from Purify here
http://fastkit.org/xposed/
Follow the links.... SDK24 for nougat 7.0..... Then download the xposed version 87 model... Flash from twrp
Again make sure you fully back up, it all went fine for me, but sometimes these things don't go right.
Plenty of posts in the linked forum but a bit of a jumble as usual, all with varied results, but the above will work for us.
Not sure how many modules are usable yet, I have one working so I know it does work.
Which are you using, and what would you like to use?
undrwater said:
Which are you using, and what would you like to use?
Click to expand...
Click to collapse
Status bar sleep.. Working
Status bar download progress.... Working (mostly)
Status bar cpu temp.. Not working
Status bar cpu frequency.. Not working
Any of the status bar theming such as wanams xtouchwiz would be good
Also xinternalsd was useful but not working
Can you change aspect ratio yet?
blaze82 said:
Can you change aspect ratio yet?
Click to expand...
Click to collapse
Not something I would normally do, is there a particular module you use for that?
It's been such a long time since I came across this, being able to adjust screen ratio and dpi on a per app basis. No real reason to now but with the 4:3 ratio on this tab, it'll be nice.
Also, been a while since I've used xbosed
does not work for me.. i get a recovery-boot loop and it does not start the system
Ch3ck3rM0n said:
does not work for me.. i get a recovery-boot loop and it does not start the system
Click to expand...
Click to collapse
I have been using it without problem for a while, but the versions used are crucial to success, I couldn't get the magisk systemless to work. Try going back to the beginning and make sure each download is correct, the method in the first post will work.
hmm.. but i need magisk :-/
Ch3ck3rM0n said:
hmm.. but i need magisk :-/
Click to expand...
Click to collapse
Ok, it may be possible for it to work, I didn't persist with it, what is the benefit with magisk for you?
rorymc928 said:
Ok, it may be possible for it to work, I didn't persist with it, what is the benefit with magisk for you?
Click to expand...
Click to collapse
Get it work with super su but installed OBBonSD does not work (with GTA, KotoR,...). Do you have any idea?
EDIT: Found a solution with http://repo.xposed.info/module/com.pyler.xinternalsd
I have followed the directions exactly and I tried twice to install xposed on my t825 rooted with magisk 14. No luck unfortunately. Has anybody been successful in installing it ??
If yes, could he share the methodology ?
xpil said:
... with magisk 14
Click to expand...
Click to collapse
had the same problem.. remove magisk and install superSU.. xposed do not work with magisk -.-' on this tablet..
Question, how do I remove xposed again?
Can I do it with the installer app, or do I need a special skript? Never used Xposed on Samsung before and I know everything works differently.
Hello,
Your experience : Do you have a "" Tab S3 SM-T825, Nougat 7.0, Root SuperSU "" on which you have installed Xposed.
1- Does Xposed work normally with different modules?
(No Bootloop or tablet block?)
2 - Which version xposed * .zip ?
3 - Which Version XposedInstaller _ *. Apk ?
Thank you
Cordially
Yam_y
Yam_y said:
Hello,
Your experience : Do you have a "" Tab S3 SM-T825, Nougat 7.0, Root SuperSU "" on which you have installed Xposed.
1- Does Xposed work normally with different modules?
(No Bootloop or tablet block?)
2 - Which version xposed * .zip ?
3 - Which Version XposedInstaller _ *. Apk ?
Thank you
Cordially
Yam_y
Click to expand...
Click to collapse
Fairly old thread this, I have a T820, however I've made roms for both variants, the t825 thread is here,
https://forum.xda-developers.com/galaxy-tab-s3/development/rom-sm-t825-tweaked-t3769742
the earlier versions are nougat the latest 3.0 on are oreo both work fine, you'll find instructions in the thread, if changing to oreo you need to flash the oreo bootloader, through odin, if returning to nougat you need to flash the older nougat bootloader as they're not cross compatible.
Xposed works fine on both, xposed installer included after booting, start the xposed installer app and select install it picks the correct version.
Root is by magisk.
rorymc928 said:
Fairly old thread this, I have a T820, however I've made roms for both variants, the t825 thread is here,
https://forum.xda-developers.com/galaxy-tab-s3/development/rom-sm-t825-tweaked-t3769742
the earlier versions are nougat the latest 3.0 on are oreo both work fine, you'll find instructions in the thread, if changing to oreo you need to flash the oreo bootloader, through odin, if returning to nougat you need to flash the older nougat bootloader as they're not cross compatible.
Xposed works fine on both, xposed installer included after booting, start the xposed installer app and select install it picks the correct version.
Root is by magisk.
Click to expand...
Click to collapse
Hello Rorymc
Thanks for the answer and for the link SM-T825 TWEAKED, but I'm already Root with SuperSU + Dm-Verity with Rom ARA2 Nougat 7.0 and I just have to flash Xposed with TWRP.
So, I think I have to take Xposed.zip and Xposedinstaller APK from rovo89 in pure version without add and unmodified ?
I hope I'm not mistaken .....
Cordially
Yam
Yam_y said:
Hello Rorymc
Thanks for the answer and for the link SM-T825 TWEAKED, but I'm already Root with SuperSU + Dm-Verity with Rom ARA2 Nougat 7.0 and I just have to flash Xposed with TWRP.
So, I think I have to take Xposed.zip and Xposedinstaller APK from rovo89 in pure version without add and unmodified ?
I hope I'm not mistaken .....
Cordially
Yam
Click to expand...
Click to collapse
Yes that's correct, just make sure you get the correct versions, if anything goes wrong just restore your backup.
rorymc928 said:
Yes that's correct, just make sure you get the correct versions, if anything goes wrong just restore your backup.
Click to expand...
Click to collapse
Hello,
Thank you. Well understood. I like your precise answers
Cordially
Yam
I noticed that after installing Xposed Framework (SDK 27) on my Pixel 2 XL, the Magisk SafetyNet would fail. I noticed it was an issue when I was going to use Android Pay and suddenly it told me my phone was not secure and has disabled Android Pay for my security.
Is there a way to fix this without disabling the Xposed Module every time I want to use Android Pay? Or is there a place where I should report this?
Sorry for dumb questions, I'm new to Android rooting and modding.
Lunatik4552 said:
I noticed that after installing Xposed Framework (SDK 27) on my Pixel 2 XL, the Magisk SafetyNet would fail. I noticed it was an issue when I was going to use Android Pay and suddenly it told me my phone was not secure and has disabled Android Pay for my security.
Is there a way to fix this without disabling the Xposed Module every time I want to use Android Pay? Or is there a place where I should report this?
Sorry for dumb questions, I'm new to Android rooting and modding.
Click to expand...
Click to collapse
If you have exposed, safety net will always fail. Can't have them both at the same time.
Badger50 said:
If you have exposed, safety net will always fail. Can't have them both at the same time.
Click to expand...
Click to collapse
Thanks for the reply. Do you know if there is a reason behind this or is it more of a bug that just happens?
Lunatik4552 said:
Thanks for the reply. Do you know if there is a reason behind this or is it more of a bug that just happens?
Click to expand...
Click to collapse
There are many references to that question in this thread ?
https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
You know if says it fails for me but all the apps I use that don't like the failing safety net still work for me. I only use a couple though, Netflix is one of them.
Those of you who must have EdXposed for your Op9pro(android 11). Flash https://github.com/RikkaApps/Riru/releases/download/v25.4.4/riru-v25.4.4-debug.zip in magisk manager followed by a reboot. Then download and flash https://github.com/ElderDrivers/EdX...EdXposed-YAHFA-v0.5.1.4_4655-master-debug.zip followed by reboot, Lastly download and install https://github.com/ElderDrivers/EdX...5700-org.meowcat.edxposed.manager-release.apk and just for good measure reboot again. This is the only working set i could get EdXposed manager to Acknowledge a successful install for my OP9 pro(Android11) Install at your own risk! im not sure of any other working sets, I personally have not had to Msm or factory out of any tantrums from my device as of yet, So if this is a MUST HAVE for your 9pro here you go!! your welcome.
It is easier to download LSPosed in magisk and flash it then reboot. Open LSPosed app and download the modules you like to try. I'm running GravityBox (R) whitout any issues.
Smedslund said:
It is easier to download LSPosed in magisk and flash it then reboot. Open LSPosed app and download the modules you like to try. I'm running GravityBox (R) whitout any issues.
Click to expand...
Click to collapse
A sad fact is that LSPosed developers are constantly splitting the Xposed community. LSPosed is the first product of plunder. No one should support this behavior, so don't install and use LSPosed.
In addition, after receiving multiple feedbacks, users have experienced system and application crashes, soaring memory occupation and other errors to varying degrees after installing LSPosed.
mlgmxyysd said:
A sad fact is that LSPosed developers are constantly splitting the Xposed community. LSPosed is the first product of plunder. No one should support this behavior, so don't install and use LSPosed.
In addition, after receiving multiple feedbacks, users have experienced system and application crashes, soaring memory occupation and other errors to varying degrees after installing LSPosed.
Click to expand...
Click to collapse
Sorry, but you are wrong. End of discussion.
mlgmxyysd said:
A sad fact is that LSPosed developers are constantly splitting the Xposed community. LSPosed is the first product of plunder. No one should support this behavior, so don't install and use LSPosed.
In addition, after receiving multiple feedbacks, users have experienced system and application crashes, soaring memory occupation and other errors to varying degrees after installing LSPosed.
Click to expand...
Click to collapse
I have no errors memory occupation etc. Runs smooth. Also everyone mentions this plunder and no one actually states what they have done. Edxposed hasn't been updated in ages. Lspose has mage a zygisk to work with new magisk. Please let me know what the have done. I know there is a parisitic mode which I don't use bc of things it could do but besides that please explain wth they did?
toolhas4degrees said:
I have no errors memory occupation etc. Runs smooth. Also everyone mentions this plunder and no one actually states what they have done. Edxposed hasn't been updated in ages. Lspose has mage a zygisk to work with new magisk. Please let me know what the have done. I know there is a parisitic mode which I don't use bc of things it could do but besides that please explain wth they did?
Click to expand...
Click to collapse
EdXposed vs Lsposed
I'm not clear on the differences between them, and it seems that there are even more alternatives. Is one better than another? I just got an Android 10 phone, was previously on 7 for a short time, but was otherwise still on 5 and 6.
forum.xda-developers.com
So athe dev made a prank? Why not just say what it is. Are you saying the permission prank. That is probably part of the parisitic end of lsposed which every user has the ability to enable or not.
I have asked this several times and haven't really gotten a valid answer. Also if it is malicious why is the app still on Google play?
jwidel said:
Those of you who must have EdXposed for your Op9pro(android 11). Flash https://github.com/RikkaApps/Riru/releases/download/v25.4.4/riru-v25.4.4-debug.zip in magisk manager followed by a reboot. Then download and flash https://github.com/ElderDrivers/EdX...EdXposed-YAHFA-v0.5.1.4_4655-master-debug.zip followed by reboot, Lastly download and install https://github.com/ElderDrivers/EdX...5700-org.meowcat.edxposed.manager-release.apk and just for good measure reboot again. This is the only working set i could get EdXposed manager to Acknowledge a successful install for my OP9 pro(Android11) Install at your own risk! im not sure of any other working sets, I personally have not had to Msm or factory out of any tantrums from my device as of yet, So if this is a MUST HAVE for your 9pro here you go!! your welcome.
Click to expand...
Click to collapse
Thanks jwidel. After hours of headaches, bootloops, bricking, and MSMDownloadTool attempts, your post got me EdXposed on my OnePlus. Many, many thanks.
Hey guys, has anyone gotten Gpay to work on lineage 19.1? I have done the following and have had very odd results. Firstly, I am passing safteynet and my device is registered as play certified in Google play store. I'm seeing where sometimes gpay won't open at all and when it does it says it is unable to load my payment methods.
Specs:
OS - linageOS 19.1 (latest build as of this post)
GAPPS - Mindthegapps (latest build as of this post)
Steps taken:
Installed magisk, enabled zygisk and rebooted
Installed magisk hide props module then rebooted
Installed shamiko module then rebooted
Installed universal safteynet fix (zygisk) then rebooted
Configured denylist in magisk checking GPS (all), and Gpay (all) rebooted
Changed device fingerprint with magisk hide props module to a certified one then rebooted
Additional steps taken:
I cleared data from GPS, play store and Gpay and rebooted
I tried a different device fingerprint and rebooted (clearing data like above afterwards and rebooting again)
I have done a complete fresh install of my OS and tried again from scratch.
I also tried seeing is renaming magisk would help at all, it didn't
It appears I'm getting nowhere with this. If anyone has gotten it to work and has some insight it's be greatly appreciated!
Nevermind, looks like it was an issue from having the pixelify module installed as well. After I removed it it started working just fine.
deathblade said:
Nevermind, looks like it was an issue from having the pixelify module installed as well. After I removed it it started working just fine.
Click to expand...
Click to collapse
Hey deathblade!
Thanks for helping me out on the other thread.
Just wanted to check in, did you use the official build or the unofficial one with the Pixel Goodies? I'm intending/hoping to have full functionalities of Google Pay using the unofficial build, but from your post it seems that I can't have the Pixel experience if I want the ROM to work with Google Pay?
HW898 said:
Hey deathblade!
Thanks for helping me out on the other thread.
Just wanted to check in, did you use the official build or the unofficial one with the Pixel Goodies? I'm intending/hoping to have full functionalities of Google Pay using the unofficial build, but from your post it seems that I can't have the Pixel experience if I want the ROM to work with Google Pay?
Click to expand...
Click to collapse
I'm using the official build. I think the unofficial has everything needed to use Gpay and have some pixel things baked in. So might be worth a look in your case
deathblade said:
I'm using the official build. I think the unofficial has everything needed to use Gpay and have some pixel things baked in. So might be worth a look in your case
Click to expand...
Click to collapse
Aite, I will try out the unofficial one and see if GPay works there too. Thanks for the headsup!
HW898 said:
Aite, I will try out the unofficial one and see if GPay works there too. Thanks for the headsup!
Click to expand...
Click to collapse
I just remembered, the unofficial is setup to pass safteynet out the box, but more maybe needed for Gpay to work. Once you flash it try it out, if you run into issues I can provide what I did to get Gpay working
deathblade said:
Nevermind, looks like it was an issue from having the pixelify module installed as well. After I removed it it started working just fine.
Click to expand...
Click to collapse
Hi there, trying out the official build after experiencing some problems on the unofficial one. Any alternatives to pixiel-ing the ROM?
HW898 said:
Hi there, trying out the official build after experiencing some problems on the unofficial one. Any alternatives to pixiel-ing the ROM?
Click to expand...
Click to collapse
Not that I've found, however I did notice if you install the pixelify module then uninstall it, it does seem to leave some stuff behind. Like I still have the option to use Hold for me and direct my call. So it might work out where you can install it to get the things you want then remove it to get Gpay working
deathblade said:
Not that I've found, however I did notice if you install the pixelify module then uninstall it, it does seem to leave some stuff behind. Like I still have the option to use Hold for me and direct my call. So it might work out where you can install it to get the things you want then remove it to get Gpay working
Click to expand...
Click to collapse
I see... So these also means stuff like Now playing etc. will be gone too right?
Also, did you experience the problems I've faced in the unofficial build? sounds cannot change etc. as posted in main thread
HW898 said:
I see... So these also means stuff like Now playing etc. will be gone too right?
Also, did you experience the problems I've faced in the unofficial build? sounds cannot change etc. as posted in main thread
Click to expand...
Click to collapse
Nope now playing is still there. I really only used it the module to force call screening to show up. But I have pretty much everything I remember from stock plus a few phone related goodies. I never tried the unofficial build but on the official I do not have that issue
deathblade said:
Nope now playing is still there. I really only used it the module to force call screening to show up. But I have pretty much everything I remember from stock plus a few phone related goodies. I never tried the unofficial build but on the official I do not have that issue
Click to expand...
Click to collapse
I see... I will try installing the official one without magisk as I won't want to meddle with rooting stuff for now, will get back with results asap!
deathblade said:
Hey guys, has anyone gotten Gpay to work on lineage 19.1? I have done the following and have had very odd results. Firstly, I am passing safteynet and my device is registered as play certified in Google play store. I'm seeing where sometimes gpay won't open at all and when it does it says it is unable to load my payment methods.
Specs:
OS - linageOS 19.1 (latest build as of this post)
GAPPS - Mindthegapps (latest build as of this post)
Steps taken:
Installed magisk, enabled zygisk and rebooted
Installed magisk hide props module then rebooted
Installed shamiko module then rebooted
Installed universal safteynet fix (zygisk) then rebooted
Configured denylist in magisk checking GPS (all), and Gpay (all) rebooted
Changed device fingerprint with magisk hide props module to a certified one then rebooted
Additional steps taken:
I cleared data from GPS, play store and Gpay and rebooted
I tried a different device fingerprint and rebooted (clearing data like above afterwards and rebooting again)
I have done a complete fresh install of my OS and tried again from scratch.
I also tried seeing is renaming magisk would help at all, it didn't
It appears I'm getting nowhere with this. If anyone has gotten it to work and has some insight it's be greatly appreciated!
Click to expand...
Click to collapse
Just also wanted to clarify in the case I decide to install magisk, which module do you install exactly? All of them? Zygisk/hide props module/shamiko/universal safetynet fix?
HW898 said:
Just also wanted to clarify in the case I decide to install magisk, which module do you install exactly? All of them? Zygisk/hide props module/shamiko/universal safetynet fix?
Click to expand...
Click to collapse
Ok so here is the breakdown:
Zygisk is not a module, but an implementation method used by modules. Magiskhide props is used to change the device fingerprint to a valid one that registers as protected by google play. Shamiko is for hiding root from Google play services, and Gpay (and whatever other apps may need it). Universal safteynet fix is used to help pass google safteynet checks (security). Not listed is the pixelify module used to add pixel exclusive features but of course with it install it cause havoc on Gpay and other apps so once installed it should be uninstalled.
TLDR
Yes all of them
deathblade said:
Ok so here is the breakdown:
Zygisk is not a module, but an implementation method used by modules. Magiskhide props is used to change the device fingerprint to a valid one that registers as protected by google play. Shamiko is for hiding root from Google play services, and Gpay (and whatever other apps may need it). Universal safteynet fix is used to help pass google safteynet checks (security). Not listed is the pixelify module used to add pixel exclusive features but of course with it install it cause havoc on Gpay and other apps so once installed it should be uninstalled.
TLDR
Yes all of them
Click to expand...
Click to collapse
Aite thanks for the help mate! just installed but apparently, i couldn't find gapps despite sideloading it.. might have to reinstall again
Hmm safetynet fix seems to fail, can't pass cts profile.. any step by step guides by any chance?
deathblade said:
Ok so here is the breakdown:
Zygisk is not a module, but an implementation method used by modules. Magiskhide props is used to change the device fingerprint to a valid one that registers as protected by google play. Shamiko is for hiding root from Google play services, and Gpay (and whatever other apps may need it). Universal safteynet fix is used to help pass google safteynet checks (security). Not listed is the pixelify module used to add pixel exclusive features but of course with it install it cause havoc on Gpay and other apps so once installed it should be uninstalled.
TLDR
Yes all of them
Click to expand...
Click to collapse
HW898 said:
Hmm safetynet fix seems to fail, can't pass cts profile.. any step by step guides by any chance?
Click to expand...
Click to collapse
That's where magisk hide props comes in. I don't have a full guide that I know of but I could do a quick wtite up tomorrow for you
deathblade said:
That's where magisk hide props comes in. I don't have a full guide that I know of but I could do a quick wtite up tomorrow for you
Click to expand...
Click to collapse
I got it working after following a guide~
Unfortunately features like now playing isn't working. the rest is pretty much okay tho
HW898 said:
I got it working after following a guide~
Unfortunately features like now playing isn't working. the rest is pretty much okay tho
Click to expand...
Click to collapse
You install the pixelify module? Also can you explain how it's not working?
deathblade said:
You install the pixelify module? Also can you explain how it's not working?
Click to expand...
Click to collapse
Nope, I didn't. Other than the modules to hide from banking apps as mentioned above, I installed a pixel launch module here to make it for pixel-like: https://forum.xda-developers.com/t/app-mod-pixel-launcher.4442077/
Other than that nothing else.
It doesn't;t work in the sense that it does not pick up music, even popular ones. The settings are there though, I can see them. It just doesn't identify any songs
HW898 said:
Nope, I didn't. Other than the modules to hide from banking apps as mentioned above, I installed a pixel launch module here to make it for pixel-like: https://forum.xda-developers.com/t/app-mod-pixel-launcher.4442077/
Other than that nothing else.
It doesn't;t work in the sense that it does not pick up music, even popular ones. The settings are there though, I can see them. It just doesn't identify any songs
Click to expand...
Click to collapse
This is the pixelify module I installed then removed, you can give it a try.
GitHub - Kingsman44/Pixelify: Magisk module to enables pixel exclusive features and ui
Magisk module to enables pixel exclusive features and ui - GitHub - Kingsman44/Pixelify: Magisk module to enables pixel exclusive features and ui
github.com
I've searched XDA and tried all the suggestions, but I still can't get Magisk to open on my Tab S. It is rooted with Lineage 17.1. I downloaded Magisk V26.1, renamed it to a zip file and installed with TWRP. I uninstalled and installed 3 times and still no luck. I also cleared cache and storage. There is no hidden version of Magisk. Anything else I can try? Maybe an older version of Magisk? Should I try wiping Dalvik cache using TWRP and if so, before or after installing Magisk?
Thanks!
Tom
try magisk canary or magisk delta
lapsmith said:
I've searched XDA and tried all the suggestions, but I still can't get Magisk to open on my Tab S. It is rooted with Lineage 17.1.
Click to expand...
Click to collapse
As you say it's rooted already why do you need to install Magisk 26 again at all, the current version already is 26.2 btw.
Cheers
Toscha
toscha42 said:
As you say it's rooted already why do you need to install Magisk 26 again at all, the current version already is 26.2 btw.
Cheers
Toscha
Click to expand...
Click to collapse
Good question. I'm a noobie and thought that Magisk provided more features or capabilities. But maybe I've been wasting my time on something I don't need!
Fytdyh said:
try magisk canary or magisk delta
Click to expand...
Click to collapse
Thanks, but it looks like canary only supports 64 bit systems. What is the difference between delta and the official Magisk? And if my tablet is already rooted, do I even need Magisk?
You don't need the Magisk app any longer. But honestly, as long as it is rooted I simply wouldn't touch it anyway. Just leave as it is.
The newer Magisk version is rather suitable for Android 13 and younger. Doesn't need to bother you and for < A12.
Cheers
Toscha
toscha42 said:
You don't need the Magisk app any longer. But honestly, as long as it is rooted I simply wouldn't touch it anyway. Just leave as it is.
The newer Magisk version is rather suitable for Android 13 and younger. Doesn't need to bother for you and < A12.
Cheers
Toscha
Click to expand...
Click to collapse
Well, that's great to hear, I don't have to mess with it any longer. Thanks so much Toscha!
Tom
Now I remember why I was trying to install Magisk I can't install Netflix from the play store (message says will not run on my device). But I found some comments here (https://forum.xda-developers.com/t/...m-t705-sm-t800-sm-t800-sm-p600.4270943/page-6) who used Magisk to get it to run:
mp1967 said:
I installed magisk v23 via twrp (renamed apk to zip first),
rebooted, used magisk modules liboemcrypto disabler and magiskhide props config and rebooted, enabled magisk hide
installed netflix app via sideload and tick box in magisk to hide this app
went to netflix account to enable HD streaming for the device
Click to expand...
Click to collapse
I tried searching that thread for any more clues, but I can't get the "Search this thread" tool to work and didn't want to read 73 pages of posts. Anyway, do you know another way to get Netflix to work on LineageOS 17.1?
I've Netflix installed on my SM-T805 (LineageOS 18.1) without any Magisk modules. Runs fine.
Cheers
Toscha
Thanks again, Toscha. I wonder if it is because I only have LineageOS 17.1, the latest available for my T700. Do you remember if you downloaded it from apkmirror?
Actually I'm not sure. At least in the settings for Netflix app it says 'Installed from Play Store'. Not sure though whether it's the same for apps installed from APKmirror.
I did that a while just for test purpose. Not using Netflix actively on the tablet. And yes, it might have been from APKmirror.
Cheers
Toscha
I appreciate all your help, Toscha. I'll try some other versions....though I think the one I used should work on the T700 processor.
Much obliged!
Hey Toscha, just wanted to let you know I got it to work. I was using TWRP to install but all I needed to do was use APKmirror installer app! All is good now
Tom
Glad it worked finally!
Cheers
Toscha