I recently came across a setting for viper on the internet and made some bit tweaks to it it's just awesome. Thought of sharing with you all!
=> I will not tell you how to install viper4android because there are lots of post about it. So just search for it
=> Download the file, unzip it and copy paste .irs file in the folder to VIPER4Android > Kernel folder. Now open viper4android and copy below settings.
=> Note that this setting is only for headphones.
Only for Headphones.
MASTER POWER
Enable ----- Tick
PLAYBACK GAIN CONTROL
Enable----- Tick
Select effect strength--- Slight
Max Gain--- 4x
Max Output--- -1.9 dB
FIREQUALIZER
Enable---- Tick
Select Preset- Custom
Please Adjust the bars as follow, 3.5, 6, 3, 0,0,0,0,0,0,-0.5
CONVOLVER
Enable--- tick
Impulse response--- HTC Beats Audio
Cross Channel--- 25 percent
FIELD SURROUND and DIFFERENTIAL SURROUND
Leave them default ( That is turn off/disabled)
HEADPHONE SURROUND
Enable--- tick
Select effect level--- Level 2
REVERVERATION
Leave default
DYNAMIC SYSTEM
Enable--- Tick
Select listening device--- Common earphone V2
Select Dynamic Bass-- 0
TUBE SIMULATOR
No change( Disabled/off)
FIDELITY CONTROL
Enable Viper Bass--- Tick
Select Bass Mode--- Natural Bass (You might give a try for Pure Bass+)
Select Bass frequency--- 80 Hz
Select Bass Boost-- 10 dB
Enable Viper Clarity--- Tick
Select Clarity Mode--- OZone+
Select Clarity--- 8db
AUDITORY SYSTEM PROTECTION(You can but I prefer this disabled. Test and select according to your preference)
Enable---- Tick
Select Binaural Level--- Extreme
MASTER GATE
Leave default. (Do nothing)
Give it a try and let me know your experience
Not completely original (I saw an internet post as I said and made some changes to it)
Thank you! Hope it will work!
Here's the link for irs file! (Google drive) :-
ZhuHangs IRS - HTC Beats Audio - FINAL (20 Nov).zip
drive.google.com
Best settings i've tried, i can enjoy the bass and vocals separately idk if that makes sense but thanks for sharing bro.
Its Awesome, thanks for sharing this steps
Awesome work, buddy.
thanks
Best setting. Love it so far. Oh and I prefer Auditory System Protection on
Thank you so much dude! I really like it :good:
Headphone logo not showing...
Synchronization problem between Audio and Video.
After applying this setting to "ViPER4Android FX_version 2.5.0.5(FX), Codename Beautiful", I got Synchronization problem between "Audio and Video" on "MX Player as well as VLC Player" using headphone "Sony MDR-XB450 On-Ear EXTRA BASS " on my Moto G4 Plus( XT1643 ) having Android 8.1 AOSP.
Where to copy the .IRS file ? I can't find the viper4android>kernel folder , help me plz
@ sanjay sahu said:
Where to copy the .IRS file ? I can't find the viper4android>kernel folder , help me plz
Click to expand...
Click to collapse
Switch to Headset settings and select Convolver. Inside Convolver select the button right next to "Select Impulse Response" and the needed directory should be created.
Otherwise just create with the help of any file manager a directory named "Kernel" inside the VIPER4Android directory in the root of your main storage.
*****ng amazing dude ?????
@ sanjay sahu said:
Where to copy the .IRS file ? I can't find the viper4android>kernel folder , help me plz
Click to expand...
Click to collapse
same here. where to put it?
sagmaw said:
same here. where to put it?
Click to expand...
Click to collapse
Check the previous comments, the answer is there
Wow the sound profile is really awesome.....can you also provide a profile for bluetooth speakers too?
I know this is for Moto G4 plus, but I tried on Zuk z1, It worked perfectly on mp3 but on youtube the music lags and disabling 2-3 toggles get it in sync again. Maybe its due to the processor not able to handle all processing altogether and i'm pretty sure it is must be the case with moto due to its lower end processor
Not able to open the Impulse Response. Please read the entire reply.
Hello,
I installed ViPER by following your instructions and it works like a charm. There's a small issue I'm facing though. It's that when I try to open Impulse Response, it says:
"The IR Sample directory /storage/emulated/0/ViPER4Android/Kernel/ is empty."
Then when I try to open that folder from Internal Storage, I can't open it as it's greyed out and says:
"/storage/emulated/0/ViPER4Android is not found"
But when I try to open the same folder from root (/data/media/0/ViPER4Android), I'm able to successfully open it.
I've tried all options, but I can't open it from SD. Can someone please help me a little over here?
I've attached screenshots:
/storage/emulated/0/Pictures/Screenshots/1.png[QUOTE][IMG="Greyed Out"]/storage/emulated/0/Pictures/Screenshots/2.png[IMG="The error message..."]/storage/emulated/0/Pictures/Screenshots/3.png[IMG="Not greyed out in root"]/storage/emulated/0/Pictures/Screenshots/4.png[IMG="Able to open it in root"]/storage/emulated/0/Pictures/Screenshots/5.png[IMG="The Kernel Folder"]/storage/emulated/0/Pictures/Screenshots/6.png[/IMG][/IMG][/IMG][/IMG][/QUOTE][/IMG]
carbonomed said:
Hello,
I installed ViPER by following your instructions and it works like a charm. There's a small issue I'm facing though. It's that when I try to open Impulse Response, it says:
"The IR Sample directory /storage/emulated/0/ViPER4Android/Kernel/ is empty."
Then when I try to open that folder from Internal Storage, I can't open it as it's greyed out and says:
"/storage/emulated/0/ViPER4Android is not found"
But when I try to open the same folder from root (/data/media/0/ViPER4Android), I'm able to successfully open it.
I've tried all options, but I can't open it from SD. Can someone please help me a little over here?
I've attached screenshots:
[/IMG][/IMG][/IMG][/IMG]
Click to expand...
Click to collapse
did you tried restarting phone? i did and after restart the viper folder was there
Mayr1k said:
[/IMG]
Click to expand...
Click to collapse
did you tried restarting phone? i did and after restart the viper folder was there[/QUOTE]
Yes, I've tried that too. I can see the folder, but I can't open it. Can you suggest another solution?
carbonomed said:
Yes, I've tried that too. I can see the folder, but I can't open it. Can you suggest another solution?
Click to expand...
Click to collapse
Uninstall viper using fx manager (link below) then restart phone normally and check if viper folder is there with root permission (you probably cant remove it tho, but in the best case fx manager should already deleted it for you)... if the folder is still there then using root access go to the next folder /Data/Media/0/ look for viper folder and delete it. now reinstall viper using the same fx manager of this link https://forum.xda-developers.com/redmi-note-3/themes/app-viper4android-fx-installer-t3703575
Related
Ok here is mod for all working rom for HTC one V
Version: FX version 2.2.0.6 / XHiFi version 2.0.0.9
Codename: (FX version) Beautiful / (XHiFi version) X-Factor
Compiled date: May 4,2013 / May 4,2013 - Official Release
Language: English (United States) / Simplified Chinese / Traditional Chinese
downloads
FX version v2.2.0.6: http://www.mediafire.com/download.php?wn2cn1lrltn685x (In-App Installation 2.3/4.0/4.1/4.2)
XHiFi version v2.0.0.9: http://www.mediafire.com/download.php?ey6ablp36s7uqbh (In-App Installation 2.3/4.0/4.1/4.2)
In-App Installation within V4A
Requirement: Rooted, installed Busybox.
Description: Starting from FX v2.2.0.4/XHiFi v2.0.0.7, Intelligent Setup is added to V4A.
This setup replaces auto/manual installation, providing the easiest installation method.
Just follow the instructions when you first run the V4A app.
[FX/XHiFi version]
Make sure BUSYBOX Fully Installed
1. Extract and Install ViPER4Android_FX.apk
2. Run FX app, when prompt, choose Yes to install/update.
3. Choose correct CPU Type.
4. Reboot device.
Switch to Compatible Mode (To use with any other sound effects including system-provided/third party)
1. In option, switch to Compatible Mode.
2. Reboot device.
3. In sound settings > music effects > Choose anything other than V4A, because V4A effects will work just like that in compatible mode.
Switch to Safe Mode (To work with almost any music player)
1. In option, switch to Safe Mode.
2. Reboot, done.
driver type selection ???
CortexA8 with NEON
(because HTC ONE V is a Single core processor)
plz give the original link
Thanks!
after installation (for Viper4android FX)
for headset
master power =enable
playback gain control=enable
effect strength = moderate
Firequalizer=enable
select preset= your wish
remaining leave it as it is...
Seraz007 said:
plz give the original link
Thanks!
Click to expand...
Click to collapse
given one is the original link only
gulsher said:
given one is the original link only
Click to expand...
Click to collapse
i mean the original thread
I'am using the same above configuration preset =rock
with poweramp
equalizer= bass booster
and its amazing
Seraz007 said:
i mean the original thread
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2191223
here you go
Wats the diff. B/w fx version and xhifi version????
rohov said:
Wats the diff. B/w fx version and xhifi version????
Click to expand...
Click to collapse
fx is used as normal for speaker or earphone
xhifi is used for retoring the sound quality basically used for earphones
gulsher said:
fx is used as normal for speaker or earphone
xhifi is used for retoring the sound quality basically used for earphones
Click to expand...
Click to collapse
So basically, which one is recomended???sry, i cant figure out about this mod and i dont kno y???:banghead:
just uninstall all the things related to it even drivers
give a restart
install FX version only
driver should be cortex a8
after installation (for Viper4android FX)
for headset
master power =enable
playback gain control=enable
effect strength = moderate
Firequalizer=enable
select preset= your wish
remaining leave it as it is.
and download this http://www.mediafire.com/download.php?33l7svyq1sf46th
and paste (there is a folder created in memory card called "viper4Android") there inside kernel and extract it there only!
and from FX
there is option in covolver
Impulse response tap it and select the option any 1 according to your need
I really do recommend this audio mod, best for music lovers, currently using NexMusic and This Mod = Ear Orgasms!!!!!
try this setting
playback gain control is on
effect strength: extreme
max gain: inf
max output: 0db
"FIRE" is on
preset: rock
Convolver is on
IR: UnitpulseDirac
Field Surround & Reverb is OFF
Dynamic System is on
Listening device: Unknown type I
Dynamic Bass: 20%
Tube: on
output gain: 0db
Limit Threshhold: -3.0db(-6.0db depends on the song,my mood)
rockstar_26 said:
I really do recommend this audio mod, best for music lovers, currently using NexMusic and This Mod = Ear Orgasms!!!!!
Click to expand...
Click to collapse
can you share EarOrgasms file mode??
zhuhang is the official maintainer of this mod, so I'm closing this thread. Please read the sharing policy before posting.
Im using moto g4 plus with stock 7.0
I wanted to install viper but it needs busy box...
I tried installing it using version 54,53,50 but it doesn't work please help me.. please help me to installing busy box in my XT1643..
Or u can help me by providing me with steps for installing dolby atmos for nougat moto g4 plus xt1643...
Waiting for your reply...
1. Install the BusyBox app and also install BusyBox inside it.
2. Set SELinux to be permissive. Install the flar2 permissive zip. https://www.androidfilehost.com/?fid=23991606952602503
3. Install Arise Sound Systems zip. https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
4. Reboot to system.
5. Configure the mods.
6. Reboot again.
tywinlannister said:
1. Install the BusyBox app and also install BusyBox inside it.
2. Set SELinux to be permissive. Install the flar2 permissive zip. https://www.androidfilehost.com/?fid=23991606952602503
3. Install Arise Sound Systems zip. https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
4. Reboot to system.
5. Configure the mods.
6. Reboot again.
Click to expand...
Click to collapse
Flair 2 should be installed from twrp??
Adarsh balu said:
Flair 2 should be installed from twrp??
Click to expand...
Click to collapse
Yes, a flashable zip is to be installed in twrp.
tywinlannister said:
Yes, a flashable zip is to be installed in twrp.
Click to expand...
Click to collapse
Is it working..cuz i tried all the viperfx and dolby atmos available in xda...it was not working for me:crying:
The forum link u have given is very messy and conatins roughly 2000 pages... Do u have a link to the file directly
Adarsh balu said:
Is it working..cuz i tried all the viperfx and dolby atmos available in xda
Click to expand...
Click to collapse
Arise Sound Systems, Divine Beats Gaana Edition, Biohazard... all work but need SE Linux to be permissive and Busy Box too. The links are in the OP. Please read the OP of the post before commenting. We can't directly share file links, XDA Rules mate.
tywinlannister said:
Arise Sound Systems, Divine Beats Gaana Edition, Biohazard... all work but need SE Linux to be permissive and Busy Box too.
Click to expand...
Click to collapse
I have busy box installed and se linux to permissive...
Let me tell u something about my device...Moto g4 plus...7.0 nougat rooted with latest twrp and elemental X kernel... Xt1643 is model using stock rom
@1chrome dude can you look into this, bro? ?
tywinlannister said:
@1chrome dude can you look into this, bro? ?
Click to expand...
Click to collapse
Yes... What to do on that
Adarsh balu said:
I have busy box installed and se linux to permissive...
Let me tell u something about my device...Moto g4 plus...7.0 nougat rooted with latest twrp and elemental X kernel... Xt1643 is model using stock rom
Click to expand...
Click to collapse
Which Busybox did you download, and did you open the app to install Busybox as tywinlannister suggested?
Also, what error are you getting, you didn't mention if the error was with Viper or with Busybox?
echo92 said:
Which Busybox did you download, and did you open the app to install Busybox as tywinlannister suggested?
Also, what error are you getting, you didn't mention if the error was with Viper or with Busybox?
Click to expand...
Click to collapse
No my busy box is working perfectly now...I have driver install failed I/O error...
echo92 said:
Which Busybox did you download, and did you open the app to install Busybox as tywinlannister suggested?
Also, what error are you getting, you didn't mention if the error was with Viper or with Busybox?
Click to expand...
Click to collapse
This is screenshot
Adarsh balu said:
No my busy box is working perfectly now...I have driver install failed I/O error...
Click to expand...
Click to collapse
Try downloading/flashing the Viper4Arise Swansong build from the ARISE thread linked by tywinlannister. It's a big clickable SwanSong™ under the 'Meet the Arise team' section on the opening post. You may also find the main ARISE Google+ page a useful resource (e.g. here's someone else with the same error. https://plus.google.com/111150029808118208419/posts/VP2NjJ6hEYc Have a look through the 20 or so comments and see if there's anything helpful in that - ignore the off topic comments towards the end).
Also, check you've got audio_effects.conf and vendor_audio_effects.conf in /system/etc using a root browser. See this post by the ARISE team on their Google+ page. https://plus.google.com/+JasonPasch5/posts/AYUSSo5mG9t
echo92 said:
Try downloading/flashing the Viper4Arise Swansong build from the ARISE thread linked by tywinlannister. It's a big clickable SwanSong™ under the 'Meet the Arise team' section on the opening post. You may also find the main ARISE Google+ page a useful resource (e.g. here's someone else with the same error. https://plus.google.com/111150029808118208419/posts/VP2NjJ6hEYc Have a look through the 20 or so comments and see if there's anything helpful in that - ignore the off topic comments towards the end).
Also, check you've got audio_effects.conf and vendor_audio_effects.conf in /system/etc using a root browser. See this post by the ARISE team on their Google+ page. https://plus.google.com/+JasonPasch5/posts/AYUSSo5mG9t
Click to expand...
Click to collapse
I will check it and get back to u..anyway thnq for sharing... Appreciate it :good:
Adarsh balu said:
This is screenshot
Click to expand...
Click to collapse
@Adarsh balu
The issue is probably with Viper not getting Storage permissions. I/O is to do with input and output of data transfer on a peripheral device, which is what makes me think it's that.
See if it has it under Apps > Vioer4Android > Permissions > Storage
It's a wild guess based on logic - could be wrong. Let us know if it works. See if you need to flash another zip. Sometimes that uses to fix issues for me. I always used Viper4Arise not Viper4Android...
1chrome said:
@Adarsh balu
The issue is probably with Viper not getting Storage permissions. I/O is to do with input and output of data transfer on a peripheral device, which is what makes me think it's that.
See if it has it under Apps > Vioer4Android > Permissions > Storage
It's a wild guess based on logic - could be wrong. Let us know if it works. See if you need to flash another zip. Sometimes that uses to fix issues for me. I always used Viper4Arise not Viper4Android...
Click to expand...
Click to collapse
Yes it was logic...but i have already given permission to storage
Adarsh balu said:
Yes it was logic...but i have already given permission to storage
Click to expand...
Click to collapse
Oh all the best fixing it.
1chrome said:
Oh all the best fixing it.
Click to expand...
Click to collapse
:laugh:
Swansong (Viper4Arise)
I have installed SwanSong and the sound is amazing. SwanSong have an aroma interface and it will be easy for you to install it with all the guides inside the installer. Here are the steps I have done to install it (Same as provided by @tywinlannister).
1. Install the BusyBox app and also install BusyBox inside it.
2. Set SELinux to be permissive. (This is important, but you can do it during the installation of SwanSong).
3. Flash Arise Sound Systems zip from the link https://www.androidfilehost.com/?w=files&flid=151719
(Click Aroma & look for ARISE+Deuteronomy+2.94+Modular+AROMA+Installer.zip)
4. Reboot to system.
5. Configure the mods.
6. Reboot again.
This is the recommended setup from the developer itself while flashing SwanSong in Aroma. (Thanks to guitardedhero)
I would recommend Core (mandatory, if not already installed), ViPER4Arise™ 2.5.0.5, Profiles, Arkamys™, ICEsound™, Skip Config and Preset, MusicFX (unless you know it's already installed, this script will leave an existing MusicFX installation intact and end, just in case), permissive (do not, if Enforcing Mode is preferred), Repair SD Card Permissions (allow up to 3-5 minutes of additional time for this script).
Once booted:
Android Settings > Apps > Menu > Show System > Arkamys > Enable Phone Permissions
Android Settings > Apps > Menu > Show System > ViPER4Arise > Enable Storage Permissions
Open ViPER4Arise™ and select Audiophile™ X profile from the Load Effect Profile option in Menu.
On displayed output tab:
Master Power > Off
Master Power > On
Menu > Device Status
Should show Enabled, Normal, and Processing: Yes (at least during audio playback for some scenarios)
If you want to select ViPER4Arise™ through a media player's Equalizer option (not necessary, recommended for users that prefer to get to ViPER4Arise™ through a media player rather than launch the app from Recents or App Drawer):
Android Settings > Apps > Menu > Show System > MusicFX > Disable
Reboot for good measure.
Hope it will help for you. If anything bad happens, just dirty flash your rom (only wipe cache and dalvik) and everything will be good. :good:
NB: There will be a lot of modules during the aroma installation which you can skip (Toolkit, Dolby Plus, Dolby Atmos etc) if it is not mentioned in the recommended setup. Its your choice. Enjoy a crystal clear sound from the great developers.
nazim7 said:
I have installed SwanSong and the sound is amazing. SwanSong have an aroma interface and it will be easy for you to install it with all the guides inside the installer. Here are the steps I have done to install it (Same as provided by @tywinlannister).
1. Install the BusyBox app and also install BusyBox inside it.
2. Set SELinux to be permissive. (This is important, but you can do it during the installation of SwanSong).
3. Flash Arise Sound Systems zip from the link https://www.androidfilehost.com/?w=files&flid=151719
(Click Aroma & look for ARISE+Deuteronomy+2.94+Modular+AROMA+Installer.zip)
4. Reboot to system.
5. Configure the mods.
6. Reboot again.
This is the recommended setup from the developer itself while flashing SwanSong in Aroma. (Thanks to guitardedhero)
I would recommend Core (mandatory, if not already installed), ViPER4Arise™ 2.5.0.5, Profiles, Arkamys™, ICEsound™, Skip Config and Preset, MusicFX (unless you know it's already installed, this script will leave an existing MusicFX installation intact and end, just in case), permissive (do not, if Enforcing Mode is preferred), Repair SD Card Permissions (allow up to 3-5 minutes of additional time for this script).
Once booted:
Android Settings > Apps > Menu > Show System > Arkamys > Enable Phone Permissions
Android Settings > Apps > Menu > Show System > ViPER4Arise > Enable Storage Permissions
Open ViPER4Arise™ and select Audiophile™ X profile from the Load Effect Profile option in Menu.
On displayed output tab:
Master Power > Off
Master Power > On
Menu > Device Status
Should show Enabled, Normal, and Processing: Yes (at least during audio playback for some scenarios)
If you want to select ViPER4Arise™ through a media player's Equalizer option (not necessary, recommended for users that prefer to get to ViPER4Arise™ through a media player rather than launch the app from Recents or App Drawer):
Android Settings > Apps > Menu > Show System > MusicFX > Disable
Reboot for good measure.
Hope it will help for you. If anything bad happens, just dirty flash your rom (only wipe cache and dalvik) and everything will be good. :good:
NB: There will be a lot of modules during the aroma installation which you can skip (Toolkit, Dolby Plus, Dolby Atmos etc) if it is not mentioned in the recommended setup. Its your choice. Enjoy a crystal clear sound from the great developers.
Click to expand...
Click to collapse
Thnq bro let me check it...Can u give me a screenshot of it..
Salam and hello everyone, ive edited mixer_paths_mtp from oreo 8.1 and made a magisk module for Dual Speaker SoundMod (vince) [AOSP PIE ONLY] .
read carefully, [AOSP PIE ONLY!!!]
check #2 post for latest AOSP Pie , AOSP Q and Miui11 Pie Vince updates
first flash magisk module.
(if dual speaker not working for you after reboot, proceed manual steps below)
then
paste manually the edited mixer_paths_mtp.xml into root/system/vendor/etc - using root explorer/mixplorer or other file manager
(copy the original mixer_paths_mtp.xml from root/system/vendor/etc to sd card or anywhere you like, rename the edited mixer_paths_mtpMODI.xml to mixer_paths_mtp.xml
then copy and paste it into root/system/vendor/etc. change permissions to 644 (rw- r-- r--), after that reboot your phone.)
try listen to the dual speaker.........
*its working for me, tried on latest PE and Havoc 2.7
*forgot to mention, i also flashed audio modification library too. (download from magisk) if dualspeaker already working for u guys just ignore.
Please try and give me feedback.
also careful on the volumes for u guys that
already got audio enhancer such as viper/dolby etc. installed.
your phone, your risk
Thank u very much...
Magisk
https://drive.google.com/file/d/1-1C4w0OV8Eyzl1jq1Xj1FH-DgBzKQQfE/view?usp=drivesdkanual
Manual
https://drive.google.com/open?id=1-6fhdJ_V3nNxaiC_MTJrhmspZJaWWfQd
Tutorial Video ( i forgot to"copy the original mixer_paths_mtp.xml from root/system/vendor/etc to sd card or anywhere" in the video)
https://drive.google.com/file/d/1J1fb_Z9mBXu6p7-USO464fHLDWg6z3K0/view
VIPER4Android FX v 2.7.1.0
i can share mine. ive added with my 4 viper profiles in it, so u can just choose which profile for speaker,headset,usb or bluetooth that suits u after installed.
-download the link below
https://drive.google.com/file/d/1-bH1CILCTxt0o0Gxi-mm7GhfIoWIPPbS/view?usp=drivesdk
-extract it in internal storage
-go to magisk, search viper4android fx version 2.7.1.0 and flash that or download here
https://drive.google.com/file/d/1-ewer6lRMSOMPzq1issS520rJEr3QCsZ/view?usp=drivesdk
or zackptg5 website https://zackptg5.com/android.php
-after that find viper4android.apk in apps drawer. install it, grant root access,install driver and it will autoreboot.
-after rebooting your device, open viper4android.apk again and click speaker. choose any of 4 profiles there. i recommend the kustom or kustom dolby system bcoz the original dolby system too loud (for me). so i edited and create the kustom profile.
-load the profile. done.
(u can play song while u load the profile too, to check and choose which profile suits u. same goes for headset,usb and bluetooth.
if u want to add more profile, paste it in the
internal > viper4android > profile. )
Credits :
Allah The Almighty
source code @Dante63
oreo mod @rashidmalyk
Latest
October 30 2019
-sharing my last dualspeaker work for vince, moving to a new phone.
-Miui11 Pie Vince only DualSpeaker Mod
Magisk
https://drive.google.com/file/d/1-9w5X_Z6TybdB8jeMeQHE0ZMvg45BIBo/view?usp=drivesdk
Manual
https://drive.google.com/file/d/1-DMiJNzTrjJhUwqbqUx9BAf803TGsKma/view?usp=drivesdk
October 2nd 2019
For Q, u can use the September 3rd 2019 Pie mixer file below for dual speaker mods.. better use manual method for now, and i didnt test any audio enhancer yet. but can confirm that dual speaker is working...
thanks
September 26th 2019
* just a little guide to make sure your dual speaker working...
-the original mixer file size for aosp pie is 62.48kb, the file ive edited is 63.71kb, so if u see your mixer_paths_mtp.xml in root/system/vendor/etc is 62.48kb apply manual method again and reboot. u need to have the 63.71kb mixer_paths_mtp.xml file in root/system/vendor/etc to make your dual speaker working. hope this will solve your "not working dual speaker issue".
September 3rd 2019
Enhanced Version DualSpeaker Stereo Mod For Vince (AOSP Pie) Extra Careful On Volumes, Especially For Audio Enhancer User
*created from latest aosp pie rom mixer file(august security patch rom)
*for this file 1 ive put nearly max setting on all speaker output and edited a few lines for headphone in the mixer file.
*the purpose? to enhanced bass sound, better stereo mod from both earpiece and main speakers.
Magisk
https://drive.google.com/file/d/1-S6CJEhjyNVQzT1KJlYYEW4Z-IlQLmjE/view?usp=drivesdk
Manual
https://drive.google.com/file/d/1-YYO30j491GXNtiZ1K22TOOWRiqEQhh9/view?usp=drivesdk
#tried on vince Android Q gsi, working
*as usual need to use both method, i will not create anymore magisk module or fix current magisk module. if anyone willing to help to make working magisk module, please do so and share here.. thank you very much
not working with magisk, tried the manual method.
working :victory:
thanks @ninken84 :good:
got pms and replies..it seems that magisk module not working for some pie custom roms, i dont know how that happened bcoz i use the same file that ive edited. so, if anybody had the same issue then i suggest just use both magisk and the manual method bcoz it will be fine. thanks
Can you make a video for me? And Salam you
SonyThEgAMaer said:
Can you make a video for me? And Salam you
Click to expand...
Click to collapse
pmed.. thanks
Can confirm it works on PE with DA Kernel and Audio Modification Library and Viper4Android. Really really nice mod. It really improves audio and the speaker is so loud which surprised me.
Moon_420 said:
Can confirm it works on PE with DA Kernel and Audio Modification Library and Viper4Android. Really really nice mod. It really improves audio and the speaker is so loud which surprised me.
Click to expand...
Click to collapse
nice..good to hear bro :good:
thanks for the feedback
Moon_420 said:
Can confirm it works on PE with DA Kernel and Audio Modification Library and Viper4Android. Really really nice mod. It really improves audio and the speaker is so loud which surprised me.
Click to expand...
Click to collapse
What is DA Kernel? You have ViPER4Android FX Legacy or XHifi?
XxXxXx121212 said:
What is DA Kernel? You have ViPER4Android FX Legacy or XHifi?
Click to expand...
Click to collapse
-DA kernel is Dark Age kernel
-i think hes using the same as mine Viper4Android FX
i can share mine. ive added with my 4 viper profiles in it, so u can just choose which profile for speaker,headset,usb or bluetooth that suits u after installed.
-download the link below
-extract it in internal storage
-go to magisk, search viper4android fx version 2.7.1.0 and flash that.
-after that find viper4android .apk in apps drawer. install it, grant root access,install driver and it will autoreboot.
-after rebooting your device, open viper4android . apk again and click speaker. choose any of 4 profiles there. i recommend the kustom or kustom dolby system bcoz the original dolby system too loud for me. so i edited and create the kustom profile.
load the profile. done.
(u can play song while u load the profile too, to check and choose which profile suits u. same goes for headset,usb and bluetooth.
if u want to add more profile, paste it in the
internal > viper4android > profile. )
Viper4Android
https://drive.google.com/file/d/1-bH1CILCTxt0o0Gxi-mm7GhfIoWIPPbS/view?usp=drivesdk
ninken84 said:
-DA kernel is Dark Age kernel
-i think hes using the same as mine Viper4Android FX
i can share mine. ive added with my 4 viper profiles in it, so u can just choose which profile for speaker,headset,usb or bluetooth that suits u after installed.
-download the link below
-extract it in internal storage
-go to magisk, search viper4android fx version 2.7.1.0 and flash that.
-after that find viper4android .apk in apps drawer. install it, grant root access,install driver and it will autoreboot.
-after rebooting your device, open viper4android . apk again and click speaker. choose any of 4 profiles there. i recommend the kustom or kustom dolby system bcoz the original dolby system too loud. so i edited and create the kustom profile.
load the profile. done.
(u can play song while u load the profile too, to check and choose which profile suits u. same goes for headset,usb and bluetooth.
if u want to add more profile, paste it in the
internal > viper4android > profile. )
Viper4Android
https://drive.google.com/file/d/1-bH1CILCTxt0o0Gxi-mm7GhfIoWIPPbS/view?usp=drivesdk
Click to expand...
Click to collapse
Thanks
Tested the magisk module and its working (Syberia rom, DA kernel and ViPER)
but which line can i edit in the mixer to increase ear speaker volume?
counter100 said:
Tested the magisk module and its working (Syberia rom, DA kernel and ViPER)
but which line can i edit in the mixer to increase ear speaker volume?
Click to expand...
Click to collapse
nice bro :good:
ear for earspeaker/earpiece,
but there r a few other lines also need to be edited there too for earspeaker.
i put 90 for ear speaker.max is 95 so becareful bro. cant guarantee
i suggest u watch dante63's tutorial first
https://youtu.be/Su9Af-jrJWQ
not working with ainur sauron or narsil? even after installing aml?
obliviousryuk said:
not working with ainur sauron or narsil? even after installing aml?
Click to expand...
Click to collapse
sorry bro, i dont know bout this. never tried ainur sauron or narsil before.
can u give me the download link,i want to try it too
ok, just tried ainur sauron.
flashed ainur sauron MK III (27.05)
checked root/system/vendor/lib/soundfx and root/system/vendor/lib64/soundfx
the files installed there.
to make it working need a manager, so i download and flashed Ainur JamesDSP v2.2 .
rebooted, open music, open JAMESDSP Manager. tweak it... and yes, its working.
*ive checked that dual speaker already working before i flash the JAMESDSP manager
*flashed without viperfx/dolby
download the manager at magisk Ainur JamesDSP v2.2 or here https://zackptg5.com/android.php
try and give feedback.. thank you
Good
Is it works for pixel caf rom
srinu1997 said:
Is it works for pixel caf rom
Click to expand...
Click to collapse
try it bro. and yes, its for aosp pie android 9 .
Its not working in havoc 2.8 there one deference in file name you say mixer_path_mtp.XML in hovec 2.8 have mixer_path.XML I try to rename like havoc but not sound?
Hi guys
I just rooted my phone and installed 5Toos rom with viper4android
But I just installed it and even when I enabled it ...it doesn't show processing....
I enabled master limiter but still the processing shows NO ....
Somebody can you give me a tutorial ????
I searched everywhere but still no help !!!!
rohithksaj said:
Hi guys
I just rooted my phone and installed 5Toos rom with viper4android
But I just installed it and even when I enabled it ...it doesn't show processing....
I enabled master limiter but still the processing shows NO ....
Somebody can you give me a tutorial ????
I searched everywhere but still no help !!!!
Click to expand...
Click to collapse
Remove whatever you installed completely. If there's an uninstaller, use that. Install the LegacyFX module through Magisk. Just follow the installer prompts, vol + or vol -, for which options you want. (I chose the older version 2.3.) At the end you can choose to make it a system or user app; I chose system. It works fine.
The device has rooted magisk
my audio experience on 1 + 5t is amazing 1 stereo system on iphone headphones you just need to install the magisk ainur sauron + viper4androi module and fix packages so that it combines together into a perfect effec combination Here you will see the power of the lord when listening to music on spotify
Experience after many trial order installation
1: ainu sauron
2: viper4andoid
3: audio compatibility patch it will create a link
4: audio modification lybrary: the module to work well on the music player is acp.zip you will find it in the link below
5:Add Dts headset port
Just the order above is enough to make you perfect sound
After having all the mods above, you will see viper4andoi change the color of the sign that it is working to enjoy the sound of the lord of the ring.
i can't upload the link you just need to search on google on "Ainur saron"
There are 2 versions for me to choose sauron
download latest 2.7 from xda lab
download and install audio modification library
open viper install driver and reboot
Found this thread on XDA for the latest Viper4Android method that also works on the Poco F3 with Root and SELinux enforcing mode.
Link: https://forum.xda-developers.com/t/viper4android.4258655/
Anyone know where I can get the latest collection of Convolver Samples?
Nemix77 said:
Found this thread on XDA for the latest Viper4Android method that also works on the Poco F3 with Root and SELinux enforcing mode.
Link: https://forum.xda-developers.com/t/viper4android.4258655/
Anyone know where I can get the latest collection of Convolver Samples?
Click to expand...
Click to collapse
Most of convolvers are outdated, the best you can do is to go on the viper4android telegram channel, contact Thomas de Witt and pay 4 euro for a personal convolver for your headphone. Or you can do it yourself but it requires some solide knowledge. There are too convolvers from stormviper, a modded viper4android but the creator is a little strange and you have to ask them personally and do a "review" for the creator to get the last convolvers (testing purpose I guess). They have a telegram channel too. You can still find pack on Google but it's old. Sorry for my English !
Greenspoof said:
Most of convolvers are outdated, the best you can do is to go on the viper4android telegram channel, contact Thomas de Witt and pay 4 euro for a personal convolver for your headphone. Or you can do it yourself but it requires some solide knowledge. There are too convolvers from stormviper, a modded viper4android but the creator is a little strange and you have to ask them personally and do a "review" for the creator to get the last convolvers (testing purpose I guess). They have a telegram channel too. You can still find pack on Google but it's old. Sorry for my English !
Click to expand...
Click to collapse
Those irs files are overrated, I personally like the same settings on all of my headphones. I like moderate gain, set to inf, I love level 3 surround sound, dynamic system high end v1 at 20 percent for bass, clarity 12db or 14.8db it depends. That's my perfect settings for Bluetooth, headphones don't require so much gain. You can also search Google fiio fh5 github or IRS file and it used to find the github for those headphones I can't seem to get it anymore. There honestly nothing special they make headphones sound worse really
Techguy777 said:
Those irs files are overrated, I personally like the same settings on all of my headphones. I like moderate gain, set to inf, I love level 3 surround sound, dynamic system high end v1 at 20 percent for bass, clarity 12db or 14.8db it depends. That's my perfect settings for Bluetooth, headphones don't require so much gain. You can also search Google fiio fh5 github or IRS file and it used to find the github for those headphones I can't seem to get it anymore. There honestly nothing special they make headphones sound worse really
Click to expand...
Click to collapse
Global IRC, indeed, but the creator of viper4android can create a custom one based on your specific headphone and just for your headphone. Therefore, the quality is a another world from basic irs. The one you find free today are old and so, they make more bad than any good.
I don't believe the version I'm running from the thread in link above has Surround, Headphones and Bluetooth options.
Nemix77 said:
I don't believe the version I'm running from the thread in link above has Surround, Headphones and Bluetooth options.
Click to expand...
Click to collapse
It's switch automatically, just connect your headphone
Greenspoof said:
Global IRC, indeed, but the creator of viper4android can create a custom one based on your specific headphone and just for your headphone. Therefore, the quality is a another world from basic irs. The one you find free today are old and so, they make more bad than any good.
Click to expand...
Click to collapse
The creator of viper doesn't do anything anymore. The team Dewitt isn't the creator he's just using the open source code for the Normal driver because the viper creator won't allow him access to super quality driver from 2.3.4 my choice. No those custom IRS files are junk I have the fiio fh5 iem and the IRS files they made it makes my headphones sound wimpy. Trust me find the settings you like on viper and a good pair of headphones like my personal favorites are Master and dynamics MW08 Bluetooth.
Techguy777 said:
The creator of viper doesn't do anything anymore. The team Dewitt isn't the creator he's just using the open source code for the Normal driver because the viper creator won't allow him access to super quality driver from 2.3.4 my choice. No those custom IRS files are junk I have the fiio fh5 iem and the IRS files they made it makes my headphones sound wimpy. Trust me find the settings you like on viper and a good pair of headphones like my personal favorites are Master and dynamics MW08 Bluetooth.
Click to expand...
Click to collapse
Didn't know that. So do you use v2.3.4 or the new one ?
Greenspoof said:
Didn't know that. So do you use v2.3.4 or the new one ?
Click to expand...
Click to collapse
2.3.4 always on android 11 it takes a little extra setting up on most roms.
Techguy777 said:
2.3.4 always on android 11 it takes a little extra setting up on most roms.
Click to expand...
Click to collapse
And 2.3.4 is really better than nowadays viper? Like did you compare? Thx for your time
Techguy777 said:
2.3.4 always on android 11 it takes a little extra setting up on most roms.
Click to expand...
Click to collapse
And if so, could you tell me where did you download this version of viper? And how did you installed it ?
Techguy777 said:
2.3.4 always on android 11 it takes a little extra setting up on most roms.
Click to expand...
Click to collapse
I tried to install it but I have a I/o error, from what I read I have to change the name of a file inside vendor/etc but I can't because of permission, could you tell me how did you do that ? Thx !
I installed everything over magisk.
First Ainur Narsil and Audio modification library then reboot. After that viper then open viper and install the driver. The device will reboot. In magisk deactivate both Ainur and AML then open viper again. Driver should reinstall again. After reboot it should work. Could be that you have to enforce in settings. In a link above there is this method mentioned.
Greenspoof said:
I tried to install it but I have a I/o error, from what I read I have to change the name of a file inside vendor/etc but I can't because of permission, could you tell me how did you do that ? Thx !
Click to expand...
Click to collapse
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Techguy777 said:
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Click to expand...
Click to collapse
It worked thx !!!! How do I choose the driver type? Because I saw there was 3 driver, super quality, high quality and power saving. Or it's already in super quality?
Techguy777 said:
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Click to expand...
Click to collapse
Well statut is abnormal, I will try with James Dps but I'm not a fan of these kind of workaround lol, but the link of Google you gave me is deleted?
Techguy777 said:
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Click to expand...
Click to collapse
Nevermind, I thought I had to install Jamesdsp "verison", like a special Jamesdsp lol, everything work great right now!!! I really thank you for your time, really ! But just one last question subsiste, how I'm sure it's the super quality driver that is installed and not high quality or energy saving?
Nemix77 said:
Found this thread on XDA for the latest Viper4Android method that also works on the Poco F3 with Root and SELinux enforcing mode.
Link: https://forum.xda-developers.com/t/viper4android.4258655/
Anyone know where I can get the latest collection of Convolver Samples?
Click to expand...
Click to collapse
Always, much better than Dolby, AudioFX and others that I tested.
The "codecs" most important is DDC/Kernel (.vdc and .irs).
When I install them in 2019 liked ClearPlus HD.irs and V4ARISE.vdc.
It's a little hard to set up (Viper and set presets) but when you learn is easy do the same for all headphones.
Maybe it could help.
I recommend you remove that older process installation because you don't need to change SELinux from Enforcing to Permissive (insecure).
In Magisk
1. Install Audio Compatibility Patch (v2.3)
2. Options: Yes, No, Yes, No, Yes, Yes, Reset.
3. Install Audio Modification Library (v4.0), reboot.
4. Instalar Viper4Android FX Legacy v4.4 (v2.5.0.4)
5. Options: Vol +, Vol-, Vol-, Vol +, Reset.
6. Install the JamesDSP module.
7. Disable any native system / ROM equalizer.
Install Viper4Android FX app (v2.6.0.6, Jan/2019) via github or backup
Option: find out him here or Magisk folder (use any root explorer for that).
Path: /data/adb/Modules/Viper (old app)
For newest V4A app use search or Rose.
Choose driver 2.5.0.4, install, restart.
So open the player.
Open Viper4Android FX app, try to apply some profile. Close and open the app if necessary.
Your Headphone need to be plugged.
NOTE: Don't forget to disable other features sound installed on your ROM like stock equalizer (AudioFX, Dolby and other).
To work correctly the Driver Status screen must be:
Driver Version: 2.5.0.4
NEON Enable: Yes
Enable: Yes
Status: Normal
Audio Format: Supported
Processing: Yes
Sampling Rate: 48000
NOTE2: The Viper4Android folder saves the profiles in the root of the internal memory and they need to be replaced in case of Internal Storage was formatted.
I upload the files (older .apk and DDCs/Kernel) on my Mega
18.21 MB file on MEGA
mega.nz
There is some perfis that I did for my headphones (JBL, Xiaomi, Bluedio, Phillips and KZ). You can try them and use it as based to fix all what you need.
Change it to others device you will need just set "Master Gate (limiter)" to 0dB on Alioth.
All them was set for Gemini (this need to be Output Gain -8.0 db).
NOTE3: I prefer the older version and older design. Just the older design app works with the folder "Profile" on .zip without any conversion files.
The new layout migrates the folder "Profile" to "Preset" on new material design. This is not compatible.
NOTE4: Maybe just AML + FX Legacy or 2.7 + JamesDSP is enough. You can remove James app after installed his Module.
Techguy777 said:
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Click to expand...
Click to collapse
As I said, you don't need to alter SELinux permissions.
There is a method that you don't modify that.
alefmm said:
Always, much better than Dolby, AudioFX and others that I tested.
The "codecs" most important is DDC/Kernel (.vdc and .irs).
When I install them in 2019 liked ClearPlus HD.irs and V4ARISE.vdc.
It's a little hard to set up (Viper and set presets) but when you learn is easy do the same for all headphones.
Maybe it could help.
I recommend you remove that older process installation because you don't need to change SELinux from Enforcing to Permissive (insecure).
In Magisk
1. Install Audio Compatibility Patch (v2.3)
2. Options: Yes, Up, Yes, Up, Yes, No, Reboot.
3. Install Audio Modification Library (v4.0), reboot.
4. Install Viper4Android FX v2.7.2.1 (driver v2.5.0.4)
NOTE: Viper FX will install the latest app, finish installing Driver v2.5.0.4 on it and running (do some test to confirm).
Afterwards, remove the latest app and install the v2.6.0.6 app.
Install Viper4Android FX app (v2.6.0.6, Jan/2019), required download via github or backup.
Choose driver 2.5.0.4, install, restart.
So open the player.
Open Viper4Android FX app, try to apply some profile. Close and open the app if necessary.
Your Headphone need to be plugged.
NOTE: Don't forget to disable other features sound installed on your ROM like stock equalizer (AudioFX, Dolby and other).
To work correctly the Driver Status screen must be:
Driver Version: 2.5.0.4
NEON Enable: Yes
Enable: Yes
Status: Normal
Audio Format: Supported
Processing: Yes
Sampling Rate: 48000
NOTE2: The Viper4Android folder saves the profiles in the root of the internal memory and they need to be replaced in case of Internal Storage formatting.
I upload the files (older .apk and DDCs/Kernel) on my Mega
18.21 MB file on MEGA
mega.nz
There is some perfis that I did for my headphones (JBL, Xiaomi, Bluedio, Phillips). You can try them and use it as based to fix all what you need.
Change it to others device you will need just set "Master Gate (limiter)" to 0dB on Alioth.
All them was set for Gemini (this need to be Output Gain -8.0 db).
NOTE3: I prefer the older version and older design. Just the older design app works with the folder "Profile" on .zip. The new layout migrates the folder "Profile" to "Preset" on new material design. This is not compatible.
As I said, you don't need to alter SELinux permissions.
There is a method that you don't modify that.
Click to expand...
Click to collapse
You can convert all profile to new format with a magisk module. But here, I'm more interested in the old version 2.3.4.0 with the super driver, discontinued in the new versions
Greenspoof said:
You can convert all profile to new format with a magisk module. But here, I'm more interested in the old version 2.3.4.0 with the super driver, discontinued in the new versions
Click to expand...
Click to collapse
Does't work and duplicate profiles (older profiles, if you don't migrate will works idem).
As I said, I tested both and the most stable is Driver Version: 2.5.0.4 and Viper4Android FX app v2.6.0.6.
Doing it correct, you can allow quality more than 200% compared without it.