Hey there I cannot install any Custom ROM on my honor 5x(kiwi)Everytime I install any custom ROM, be it cyanogenmod, xenonHD or resurrection remix. I follow the exact same steps posted everywhere.
Here are the steps I followed(using TWRP):
put both gApps and ROM file on Sd card
boot into recovery mode
select wipe>advanced wipe> selected(Dalvik/Art Cache+cache+data+system+(tried wiping internal storage once too)
swipe to wipe
go on home
select install select Custom ROM +(selected gApps once with ROM zip and once separately)
swipe to confirm flash> clear dalvik/cache
reboot system
Phone goes into bootloop everytime
tries going into recovery again>wipe>advanced wipe>select dalvik/ART cache+cache
swipe to wipe
reboot
phone is still in bootloop no matter how much time I leave it.
PLease help I'm stuck
You might have flashed bad recovery try re downloading twrp and reflash that might fix it.
Related
****edit: It appears that the option "format /system" which is tucked away in a sub menu did the trick and erased the rom.
I am trying to completely delete a rom I have installed which is CyanogenMod 11 but it seems to stay no matter what, or I'm not doing it right.
First I go into recovery with the power+vol down and choosing recovery.
I have ClockworkMod 5.8.1.5.
From there I choose the wipe data/factory reset and also the wipe cache partition and wipe dalvik cache.
Then I choose the install zip from sd card to install Blackout_ICS_Incredible_v4.0.zip
After following the installer instructions and rebooting it goes back to CM11...
Any ideas how to wipe CM11 from my device?
Thanks :good:
Netanel1 said:
****edit: It appears that the option "format /system" which is tucked away in a sub menu did the trick and erased the rom.
I am trying to completely delete a rom I have installed which is CyanogenMod 11 but it seems to stay no matter what, or I'm not doing it right.
First I go into recovery with the power+vol down and choosing recovery.
I have ClockworkMod 5.8.1.5.
From there I choose the wipe data/factory reset and also the wipe cache partition and wipe dalvik cache.
Then I choose the install zip from sd card to install Blackout_ICS_Incredible_v4.0.zip
After following the installer instructions and rebooting it goes back to CM11...
Any ideas how to wipe CM11 from my device?
Thanks :good:
Click to expand...
Click to collapse
Try formatting with fastboot.
Boot your device into fastboot and type these commands
Code:
fastboot devices
Just to be sure ur devic is connected
Code:
fastboot format system
Code:
fastboot format data
Code:
fastboot format boot
If the above doesnt work, susbtitute
Code:
format
with
Code:
erase
4EXT Recovery 1.0.0.6 R2
try changing the recovery via bootloader, download latest 4ext recovery zip then rename it to PD98IMG and place it to your root directory of your sdcard. Then go into bootloader it will automatically detect zip file and will ask you for update, press volume up to start the update, reboot and your done. After flashing new recovery go into recovery and then wipe/format from there format all partitions except sd card. When done go back to main menu and select info to see the free space/size of all partitions.
Device: HTC Desire HD
ROM: CM11 M8.1
Recovery: 4EXT 1.0.0.6 R3 build 8
If it helped you then pressing then press the thanks button.
I was facing bootloop (stuck at mi logo) issue with installing any custom Rom on my Redmi 1s, and i think many other people suffering this prob too.
Today i finally did it! So, now going to tell you how to excatcly flash any ROM on Redmi 1S!
Follow these steps : (STEP No. 4 and No.6 is too RECOMMENDED) !!
1.Flash TWRP Recovery (Latest one)
2.Backup your ROM (RECOMMENDED)
3.Go to "wipe > Swipe to Factory Reset"
4.(INPORTENT!) after Factory reset, go back on Home, then go to "Reboot > Recovery" (NOTE: reboot into recovery, not in system)
5.After that go to "wipe" again, then click on "Advanced Wipe" then select everything except "USB OTG" and "External SD".
6.After that, reboot into recovery again! Follow 4th no step again! (RECOMMENDED)
7.Now flash the custom ROM zip.
8.After flash, dont reboot! clear delvik cache! (this option will come on left side when your flashing will done)
9.Now Reboot to System and enjoy the ROM
boot loop still exists
Hey i tried this step by step ,,,still failure ,,,, after flashing rom when i reboot to system its just coming to mi screen n blinking
abhijeet.mitra.7 said:
I was facing bootloop (stuck at mi logo) issue with installing any custom Rom on my Redmi 1s, and i think many other people suffering this prob too.
Today i finally did it! So, now going to tell you how to excatcly flash any ROM on Redmi 1S!
Follow these steps : (STEP No. 4 and No.6 is too RECOMMENDED) !!
1.Flash TWRP Recovery (Latest one)
2.Backup your ROM (RECOMMENDED)
3.Go to "wipe > Swipe to Factory Reset"
4.(INPORTENT!) after Factory reset, go back on Home, then go to "Reboot > Recovery" (NOTE: reboot into recovery, not in system)
5.After that go to "wipe" again, then click on "Advanced Wipe" then select everything except "USB OTG" and "External SD".
6.After that, reboot into recovery again! Follow 4th no step again! (RECOMMENDED)
7.Now flash the custom ROM zip.
8.After flash, dont reboot! clear delvik cache! (this option will come on left side when your flashing will done)
9.Now Reboot to System and enjoy the ROM
Click to expand...
Click to collapse
sauman said:
Hey i tried this step by step ,,,still failure ,,,, after flashing rom when i reboot to system its just coming to mi screen n blinking
Click to expand...
Click to collapse
Which rom have you flashed??
I have tried with Ressurection Remix & Xperience both marshmallow version,,,,
vicky romero said:
Which rom have you flashed??
Click to expand...
Click to collapse
sauman said:
I have tried with Ressurection Remix & Xperience both marshmallow version,,,,
Click to expand...
Click to collapse
First wipe cache,dalvik cache,system, data and internal then flash rom then without wiping anything flash gapps then again without wiping anything flash firmware then reboot to system without wiping
I recently installed twrp and for my moto g5 then I did format data later on went for reboot system then I found no os installed so I installed a custom Rom later rebooted the system then I got stuck in twrp loop. I went through all the solution but it did not work so please help. Thank you
If you're on stock rom you need to remove dm-verity for it to boot (read faqs on twrp thread!)
For custom rom flash it correctly
Wipe
Advanced wipe
Wipe system data cache
Install
Select rom zip
Select gapps zip
Select root zip (optional)
Wipe cache
Restart
What architecture rom and twrp are you using?
After flashing the Syberia 9.0 rom into my mix 2, my phone stuck in the fastboot mode. Every time I tried to reboot my phone, my phone will go right into the fastboot mode. I could get into the TWRP, and I perform the 'wipe' serval times.
This is what happens on my phone:
wipe the system---- flash the rom ------ reboot ----- fastboot mode
I don't know what happens with my phone. Pls help me guys:crying:
Could I try to use the official miui fastboot update via the mi flash?
Try installing again with "Clean Flash". Wipe System, Cache/Dalvik and format Data (don't wipe data).
Backup your data first, because your data will destroy.
I believe you should already have the ROM, Firmware and Gapps into internal storage.
Now boot to recovery.
Wipe Data (if u are decrypted, format data)
But be aware that formatting Data means that you have to again copy everything back to internal storage using adb. So my advice is to just wipe and see if that works out.
Install Firmware, ROM and Gapps zip.
Order of installation should be same.
Reboot - 1st boot may take some time.
Hi,
i was using LineageOS 17.1(Android 10) on my pixel Xl (32 gb storage)
when android 11 came out, I thought I would switch to pixel experience. So I went to their official website and downloaded the android 11 version of pixel XL
There was an instruction guide provided by the developers on how to install android 11
So I followed that and even after applying update from the adb, there was no issue at all
but when I pressed "Reboot to system" Bootloop is happening
Note: I didn't noticed the official instruction first so i installed twrp to flash the rom just like I flashed LineageOS, but in the advance wipe section, there was only 4 option available
-Dalvik / ART cache
-System
-Data
-Internal Storage
there was no cache option
I formatted the data and wiped all of them and tried to both install and sideload the rom but every time during the installation, an error (code 28) occurs
Then I downloaded the rom again hoping that the previos 1 was corrupted and i saw the instruction guide this time.
So I followed the guide and installed their recovery image, flashed recovery partition and flashed the rom using sideload.
But after rebooting the system, Bootloop keeps occurring
*sorry for any misspell or grammatical mistake*
ROM and Recovery image Downloaded from - https://download.pixelexperience.org/marlin (Android 11, 2021/04/16)
ROM and Recovery image installation guide - https://wiki.pixelexperience.org/devices/marlin/install/
I'm having the same issue. Did you flash the repartition zip?
I ended up reflashing stock rom https://developers.google.com/android/images#marlin
Try doing that and restarting the process
GalaxyWhy said:
I'm having the same issue. Did you flash the repartition zip?
I ended up reflashing stock rom https://developers.google.com/android/images#marlin
Try doing that and restarting the process
Click to expand...
Click to collapse
I actually solved the problem a few moments ago
What i did wrong was, when i sideload the rom rom file with twrp i always cleared the dalvik and cache file
let me make a little guide for you..hope that will help
1. install twrp recovery
2. go to wipe section -> advanced wipe -> wipe all 4(Dalvik/ART cache, System, Data, Internal Storage)
3. do a factory reset and format data
4. go to mount section and check all the boxes (system, data, vendor)
5. sideload the repartition zip according to your storage and device model (mine was pixel xl 32gb)
6. after sideload is done reboot the system..it will reboot into recovery again
7. then again sideload the rom file (don't check the clear cache and dalvik boxes)
8. after that is done, go back to main menu and go to reboot-> switch to slot B-> Reboot into system
Hopefully you're done
Note: don't skip any step regarding how minor it is
and if you wish you can also follow the official instruction: https://wiki.pixelexperience.org/devices/marlin/install/
Let me know if it works for you
Best of luck!