Develop Bugs

[Q] Question, trick headphone connection. From OMTP to CTIA

I have ARC S and I satisfied with it in every way almost. Almost because the passage of headphones.
Because of the combination of his old headphones (OMTP) any quality with a microphone headset not working on it. For example BEATS SKULL etc. ..
Because they all work the latest technologies that CTIA.
So I wanted to know. If I replace the headphone jack of the phone itself. Sony's connection to connect another method CTIA Does it work? Or should be more any material change?
Trick can be so simple and it will work?

??

Here.
The CTIA Technology differs of the other one just what the mic and ground is inverted, like this image can display.
Actually SE make an adapter to do this convertion.
More info in google, XDA doesn't let me post outside links =/
You can give it a try and try to do it by yourself, with a female jack with quadpolar and a male jack same quadpolar.
Greetings and succes!

Here's an adapter
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[Help] Headphone in My xperia S Disconnected But Still says connected

My Xperia S always Notify headphone as connected and it works as if are headphone connected
(i.e) All the actions are performed Like Headphone connected
so I removed My my back cover to test is there any hardware problem
i removed that jack connector and cleant
at the time (i.e) while that jack disconnected for cleaning i noticed the phone still says headphone connected
i rebooted and flashed with that jack hardware disconnected
but still same Issue
What willl be The error????
I can confirm its software issue only because i checked by removing hardware individually
Expertz Give Your Ideas... It may Help Me A lot
Image attached
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Go Guys
I itself Found One solution Use SoundAbout App to manually switch Between
Headphone and Speaker Mode..
https://play.google.com/store/apps/details?id=com.woodslink.android.wiredheadphoneroutingfix&hl=cs

Can 2 channels be turned into 5 or 6 in order to go to a car amp??

Hello,
I am installing my Nexus 7 into my 2009 Dodge RAM 1500 QuadCab. I have component speakers in all the doors (four channels total,) and my tweeters and subs are sharing a channel (split with crossovers) - which all runs to my five channel amp. My question is how to get the best sound from my Nexus 7 to my car amp.
I will be using a USB DAC, but that still only outputs two channels and I need those two channels to somehow turn into five, so that they can go to my five channel amp and from there to my speakers and subs. Is there some sort of audiophile custom sound board out there made for these applications? I REALLY don't want to have to use Y splitters. This would be a piece of cake if I didn't want to have that 5th channel. I would even be ok with having 6 channels.
My Amp: XD700/5
Thanks in advance for any help.

This is what I need help with:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Closed on OP's request

KOSTA Portable Mini Bluetooth Speaker unboxing and review

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Technical features:
Bluetooth 3.0, USB, Line in, TF card, Microphone.
Distortion < 0.5%
SNR >80DB
Rated Impedance: 16ohm
Channel Separation 50dB
Speaker: 3W
Frequency range: 100HZ--20KHZ
Battery: 3.7V/680mAh
Working Voltage: 3.7- 4.2V
Size:64*59mm
Weight:135g
Metal shell.
KOSTA is a small and very cute mini portable bluetooth speaker. It looks stylish and modern.
The size is perfect to your hand and bag. You can even put it into your pocket. I was really impressed by its sound. I did not expect a lot from such a small device but it play great!
Surround sound and good bass. I tested a battery - it's playing 5 hours on 100% volume.
I can recommend to your use and perfect as a present to anybody from children to your parents!
My unboxing and a short test:
I ordered it at Amazon https://www.amazon.com/Portable-Bluetooth-Wireless-Enhanced-KOSTA/dp/B01KLTHVCE

deleted, sorry

Nexus 5x volume components

Hi,
While I dissasmbled my nexus 5x, I accidently ripped the two components of the volume- button. (You could see it in the upper side of the photo below - the first two components right to the barcode)
I belive it some kind of resistores or capacitors.
Can anybody tell me what are they and what their values?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also,
After connecting homemade portable charger, my usb port doing problems. First it won't charge by connecting and cable that isn't the original charger, after factory reset it works without any problems.
I can now now charge it OK and also transfer files to the computer, BUT USB audio do not works constantly (5 seconds on 5 seconds off) and the same is the OTG. It seems the connections are fine (Ill re-solder them later). Anyone heard about a similar problem? What could be the cause?
Thank you!

Hello Bro. I have the similar problem: My phone got wet and when I was drying it with the heat gun, the components of volume + and - were deployed. I dont know if this can fix.