Related
I tried updating both the PDA ROM and the RSU.
The PDA ROM updated OK, to 3.2.17 and then I tried to upgrade the RSU to 4.21.
Basically I got to 1% loaded then got a message saying the Flash Update failed. The device re-starts then I get the same error.
Tried deleting the PROGRAMME B from the start menu, removing it then tryong again, no joy.
Any ideas?
Code:
Download the XDA-Developers ROM Version 1.1.
Install the ROM on your Device via SD-Card and bootloader.
The phone should start up and give you the screen allignment and the whole menu!
Download an Upgrade for your device. This depends ont the model you are using. Check the sticker at the back of your device.
If it is a PW10A-Model download RSU Version 4.16.
If it is a PW10B-Model download RSU Version 6.24.20.
Extract the downloaded ZIP-File and copy all files to the /Windows directory of your device.
Copy the RSUpgrade.exe additional to the /windows/startup directory.
Make an soft reset of your device.
Maybe the upgrade will stop again at 1%, this may occur when you have an empty battery.
Place your device in the cradle. Run Active Sync on your device.
The RSU Upgrade will run in the background.
Wait for about 10 Minutes. The upgrade should complete in the background....
Afterwards all should work again...
Good luck....
HTH
Stefan
hello
unit 800x480 rk3188 single din 7" flip up similar to KD-C0109 =
*MCU:MTCC-KLD5-V2. 97
*Kernel : 3.0.101+ [email protected] #108
*Build : rk3188-userdebug 5.1.1 LMY48Y eng.hac.20160411.083226
so i wanted to try a new firmware from huifei server but somehow it failed and now it s stuck in recovery mode. stupid me i didnt make a backup.
now everytime i try to flash a firmware i have an error when checking parameter :
"E:can't open /dev/block/rknand_parameter
E:bad dest path /parameter"
I tried to flash some mtcc kdl stock firmware available on huifei server but same error.
So can someone help me please or give me a link to flash back to my previous firmware.
recovery system version : v5.1
i guess i maybe damaged the RK nand flash data somehow, so is there a way to fix that with RKBatchTool app? if yes, how can boot the device in the correct mode please?
device various name: sk-c0109-us, pumpkin KD-C0109-us-a or kd8600.
well i found the same pb on 4pda.ru ( http://4pda.ru/forum/index.php?showtopic=704934&view=findpost&p=53248094) and i tried to put my device in loader mode to be able to use RKBatchTool but with no success. i tried every method on their website (http://4pda.ru/forum/index.php?showtopic=704934&view=findpost&p=44580369). i tried as well the sd_firmware_tool (sdupdate.img thing) but no lock.
i have 1usb (front) + 2usb back (normal + dvr) and dont know which one to use. i tried to check inside to short pins but seems to be a BGA nand.
so please if someome has similar device as mine and know how to put in loader mode, will be really appreciated. thx.
Hy,
i also have the same problem. After loading a wrong ROM onto my RK3188, my unit is stucked in bootscreen.
EVERY image file i could found, is rejected with this rknand errors
Also i get this errors if i boot directly from the SD card (turn off my unit, plug power out, insert SD, plugin power). I wrote Malaysk a email and hope he has a idea
hi
use a kit kat 4.4.4 firmware with sd_firmware_tool method. after use DSA 5.1.1 firmware if u want lollipop. i havent managed to use a FUSE firmware.
marcel.ng886 said:
hi
use a kit kat 4.4.4 firmware with sd_firmware_tool method. after use DSA 5.1.1 firmware if u want lollipop. i havent managed to use a FUSE firmware.
Click to expand...
Click to collapse
Had the same issue.
I can confirm that if you are having this issue you need a version 4.4 recovery. No current ROM that includes a 5.1 recovery will work.
You can use the SD Firmware tool with any 4.4 ROM (assuming you have a MTCB/C unit) and also with DSA8310's Lollipop ROM as this one also includes a 4.4 recovery..
After you have a working recovery you can flash a 4.4.4 FUSE ROM - I flashed Malaysk's October ROM and it works flawless.
You could also take any 5.1 ROM you like, decompress it with imgRePacker, replace the 5.1 recovery.img with a 4.4. image, edit the parameters.parm file to match the new layout, rebuild the update.img file with the same imgrePacker and flash.
One detail about the SD Firmware Tool. In order for it to work the way it was intended you have to insert it in the GPS slot and then SIMULTANEOUSLY apply +12V and ACC power.
I was simply unable to do this with the unit in the car, I had to take it out and power it from my car battery charger, only way it worked. So if it does not seem to work at first don't despair
m00n61 said:
Had the same issue.
I can confirm that if you are having this issue you need a version 4.4 recovery. No current ROM that includes a 5.1 recovery will work.
You can use the SD Firmware tool with any 4.4 ROM (assuming you have a MTCB/C unit) and also with DSA8310's Lollipop ROM as this one also includes a 4.4 recovery..
After you have a working recovery you can flash a 4.4.4 FUSE ROM - I flashed Malaysk's October ROM and it works flawless.
You could also take any 5.1 ROM you like, decompress it with imgRePacker, replace the 5.1 recovery.img with a 4.4. image, edit the parameters.parm file to match the new layout, rebuild the update.img file with the same imgrePacker and flash.
One detail about the SD Firmware Tool. In order for it to work the way it was intended you have to insert it in the GPS slot and then SIMULTANEOUSLY apply +12V and ACC power.
I was simply unable to do this with the unit in the car, I had to take it out and power it from my car battery charger, only way it worked. So if it does not seem to work at first don't despair
Click to expand...
Click to collapse
I had 5.1 recovery and ran into same issue with Malaysk 5.1 FUSE ROM. I restored system with DSA prerooted ROM and was also able to install factory 5.1 ROM with no issues. Only Malaysk ROM is giving me this issue.
Is there any other way to install Malaysk ROM? I really want to try it.
huuhuubaer said:
Hy,
wrong ROM onto my RK3188, my unit is stucked in bootscreen.
EVERY image file i could found, is rejected with this rknand errors
Also i get this errors if i boot directly from the SD card (turn off my unit, plug power out, insert SD, plugin power). I wrote Malaysk a email and hope he has a idea
Click to expand...
Click to collapse
i also have the same problem. After loading a rom malaysk 1024x600 rk3188. My radio is 1024x600 and rk3188, error mcu img aborted and no work my radio more...
PD: My head unit
MTCC KLD6 2.97
5.1.1 - 1024x600
RK3188 Quad core
16gb rom
1gb ram
Repair method 100%
http://forum.xda-developers.com/showpost.php?p=67184851&postcount=50
I need help.
emudem said:
Repair method 100%
http://forum.xda-developers.com/showpost.php?p=67184851&postcount=50
Click to expand...
Click to collapse
Hi, I need your help. I bought a car unit a few months ago, I had problems with bluetooth service, and the online store sent me an image for update. When I updated from "about the device" and restarted the device, it did not pass the screen with the logo "lollipop multimedia on vehicle navigation syntem". My problem, is that the store where I bought it on the internet, does not answer my message again.
I think that my problem is the same described in this post. And I don't know wich firmware should I download.
I'm new in this. Thank you!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
juandiego85 said:
Hi, I need your help. I bought a car unit a few months ago, I had problems with bluetooth service, and the online store sent me an image for update. When I updated from "about the device" and restarted the device, it did not pass the screen with the logo "lollipop multimedia on vehicle navigation syntem". My problem, is that the store where I bought it on the internet, does not answer my message again.
I think that my problem is the same described in this post. And I don't know wich firmware should I download.
I'm new in this. Thank you!
Click to expand...
Click to collapse
Hello There,
I was in the same boat.
My unit had Lolipop 5.1.1. and I tried to install with many LP 5.1.1 Firmwares to recover my bricked system, but nothing worked.
I read it in the forums that the SD Card boot process works well with all Android 4.X.X Firmwares. So i tried it with this one below,
https://mega.nz/#F!zRRkVThb!DYBC0LRK-o34ZxDObQo73Q!bRQ3EJQD
File name: KLD_rk3188_h_2016-02-26.RAR (Mine is a Klyde RK3188 MTCC unit., so you will have to find a corresponding Android 4.X,X Firmware that suits your device)
I followed the SD card boot up process mentioned below, with this firmware KLD_rk3188_h_2016-02-26.RAR.
https://forum.xda-developers.com/showpost.php?p=67184851&postcount=50
To my Surprise, the System accepted the Android 4.4.4 Firmware and I was able to boot my device successfully.
Later, I have asked the people where I bought this DVD to send me the correct and updated firmware for Android 5.1.1, which suits my device.
Now, I put the update.img file of the latest Android 5.1.1 firmware to the root of another SD card and updated my system going to Settings -> System Updates.
I checked the box, where it said "Wipe everything and Install"
The Systems restarted and it accepted the new Android 5.1.1 Firmware and the system booted back in successfully with Android 5.1.1 .
I hope this helps someone in the future.
God Bless,
Shaju Mathew
:crying:Last night, I installed the Android 8 update package on the forum.
Halfway through, an error is displayed and then exit.
I tried eRecovery and Hisuite, but all failed.
I tried it and found that the original recovery partition became recovery_ramdisk. It looks like the partition has changed.
What can I do to be able to return to emui5?
I have imagined "fastboot flashall", but I do not know how? Forgive my lame English
zzkeier said:
:crying:Last night, I installed the Android 8 update package on the forum.
Halfway through, an error is displayed and then exit.
I tried eRecovery and Hisuite, but all failed.
I tried it and found that the original recovery partition became recovery_ramdisk. It looks like the partition has changed.
What can I do to be able to return to emui5?
I have imagined "fastboot flashall", but I do not know how? Forgive my lame English
Click to expand...
Click to collapse
recovery_ramdisk. is the new name of recovery partition. EMUI8/Oreo flashing has started means the partitions etc have changed already so right now you can't go back to EMUI 5 as rollback images are not available yet. You can try to flash again properly with proper download for your specific model. I guess you are missing some echo commands.
thank you very much
SVR said:
recovery_ramdisk. is the new name of recovery partition. EMUI8/Oreo flashing has started means the partitions etc have changed already so right now you can't go back to EMUI 5 as rollback images are not available yet. You can try to flash again properly with proper download for your specific model. I guess you are missing some echo commands.
Click to expand...
Click to collapse
I extract the update.app(oreo) file and then i flash the system.img. Now it works..Thank you
hey how did you did that?
zzkeier said:
I extract the update.app(oreo) file and then i flash the system.img. Now it works..Thank you
Click to expand...
Click to collapse
I also have similar problem I installed different model rom using firmware finder and now I can only use my phone when I unlock bootloader when I lock it it will not open directly go into the erecovery and nothing is working I tried everything twrp,erecovery,force updating nothing worked all failed.please help
shrey2204 said:
I also have similar problem I installed different model rom using firmware finder and now I can only use my phone when I unlock bootloader when I lock it it will not open directly go into the erecovery and nothing is working I tried everything twrp,erecovery,force updating nothing worked all failed.please help
Click to expand...
Click to collapse
well,I flash the system.img by fastboot,and then make a factory reset.Bootloader unlock needed.
i have the same problem
I tried to upgrade phone to Oreo after unlock, in update progress it got error and restart phone! Now it shows:
Code:
Error Mode
Attention!
Please update system again
Error!
Func No : 11 (recovery image)
Error No : 2 ( load failed )
I just have access to fastboot
i did flash system.img and tried install twrp on ramdisk recovery. but always same
:crying::crying::crying::crying:
Hello, i have bricked my phone after an hurupdate, i dont know why but the phone have suddenly turn off during twrp hurupdater process and now i can't turn on the phone, i can plug in my pc & he recognize him as "fastboot devices" but when i try to flash something or unbrick via multi tool nothing happen (FAILED (remote: Command not allowed))
I can't do anything now.. Please help me !
Albanheraibi said:
Hello, i have bricked my phone after an hurupdate, i dont know why but the phone have suddenly turn off during twrp hurupdater process and now i can't turn on the phone, i can plug in my pc & he recognize him as "fastboot devices" but when i try to flash something or unbrick via multi tool nothing happen (FAILED (remote: Command not allowed))
I can't do anything now.. Please help me !
Click to expand...
Click to collapse
Erecovery has started working for some people. you can try that
mrmazak said:
Erecovery has started working for some people. you can try that
Click to expand...
Click to collapse
Nope .. nothing work ..
Anyone know how to unbrick ? ..
I think i have flashed the wrong update, i have bndl21 & i have flashed the bndl22 or bndal10, my phone is dead ?
Albanheraibi said:
I think i have flashed the wrong update, i have bndl21 & i have flashed the bndl22 or bndal10, my phone is dead ?
Click to expand...
Click to collapse
Shouldn't be, at least not from that, not completely.
Was this the first condition, or an added problem?
I think best thing to try is the service ROM.
This one is BND-L21C432..
Service rom BND-L21C432
https://www.androidfilehost.com/?fid=11050483647474828964
1. Unzip download
2. copy the dload folder to root of sdcard
3. power on phone holding all three buttons
4. After phone finishes and reboots, unlock frp and bootloader, if needed
5. Use Huru or HWOTA to flash correct firmware for your model/ region.. If this is not the correct version for your honor 7x
Now with dc phoenix i have restore the fastboot and the erecovery, i can flash all i want but nothing happens, just boot loop at "your phone is not trusted" screen.
I was on catuva's rom before brick and now i have the catuva splashboot screen even after full firmware retore by dc phoenix.
When i try to flash in twrp i see lot of errors related to partition table (invalid argument cust, odm, sytsem etc) it seems the partition table have a problem..
The DLOAD can restore this ?
When i try to restore via dload it stuck at 5% and it says "software install failed!" ..
Someone Help me ?..
Albanheraibi said:
When i try to restore via dload it stuck at 5% and it says "software install failed!" ..
Someone Help me ?..
Click to expand...
Click to collapse
You got failed using the "service-rom" dload?
This one is Oreo I believe. There is a nougat one also.
mrmazak said:
You got failed using the "service-rom" dload?
This one is Oreo I believe. There is a nougat one also.
Click to expand...
Click to collapse
Yes stuck at 5%..
i have try to flash the Honor 7X-Elemental V1(8.X-GPU) and i get an error at the end of process >
mount: failed to mount
/dev/block/platform/hi_mci.0/by-name/system at /system: invalid argument
What i am supposed to do with this error ?
Albanheraibi said:
Yes stuck at 5%..
i have try to flash the Honor 7X-Elemental V1(8.X-GPU) and i get an error at the end of process >
mount: failed to mount
/dev/block/platform/hi_mci.0/by-name/system at /system: invalid argument
What i am supposed to do with this error ?
Click to expand...
Click to collapse
Says in the install guide for it, you must be running at newest security patch in order to install elemental.
Please focus on one thing. Getting phone to boot full stock first before trying other rom. You are going to hard brck your phon if you keep doing flashes when the stock fails to install
mrmazak said:
Says in the install guide for it, you must be running at newest security patch in order to install elemental.
Please focus on one thing. Getting phone to boot full stock first before trying other rom. You are going to hard brck your phon if you keep doing flashes when the stock fails to install
Click to expand...
Click to collapse
When i try to rollback emui5 via twrp with your guide i have this error :
write radio image...
check_write_data_to_partition,write data error update_huawei_pkg_from_ota_zip: update pakage from zip failed
E : unknown command [errno]
Updater process ended with ERROR : 9
Error installing zip file '/external_sd/HWOTA8/update.zip'
i remember that the phone has started to bootloop just after twrp flashed the wrong radio file..
This is the end ?
Albanheraibi said:
When i try to rollback emui5 via twrp with your guide i have this error :
write radio image...
check_write_data_to_partition,write data error update_huawei_pkg_from_ota_zip: update pakage from zip failed
E : unknown command [errno]
Updater process ended with ERROR : 9
Error installing zip file '/external_sd/HWOTA8/update.zip'
i remember that the phone has started to bootloop just after twrp flashed the wrong radio file..
This is the end ?
Click to expand...
Click to collapse
I am not understanding how you say you follow my guide, then post the error.
This error shows you are trying to install ota update with TWRP.
My guide sets you to install ota update file with a modified stock recovery (no-check).
If you are having trouble because of bad translation, please do not assume what you need to do and wait for proper help and translation
mrmazak said:
I am not understanding how you say you follow my guide, then post the error.
This error shows you are trying to install ota update with TWRP.
My guide sets you to install ota update file with a modified stock recovery (no-check).
If you are having trouble because of bad translation, please do not assume what you need to do and wait for proper help and translation
Click to expand...
Click to collapse
Ok after update with hurupdater via twrp (he flashed the correct radio.img file) the phone have income from death !
Thank you for trying to help me !
Dear friends,
I need your expert help, please.
I am trying to resurrect a Fonepad 7 model K012 (SKU WW) so that my wife can use it as a spare tablet.
I have managed to soft-unbrick it and now it runs firmware version
JSS15Q.WW_fonepad_S-10.32.1.31.2-20140721
I am trying to upgrade its firmware to the latest available firmware for this model, which, for what I see in the Asus download page is
Version WW_12.8.1.38
2015/10/19
If I follow the official update procedure of downloading the firmware and saving it in the SD card, the notification pops up correctly about a fimware update file being available. However, when choosing to update the fw through the UL-K012-WW-12.8.1.38-user.zip file the tablet restarts in "Installing system update" but then every time it throws an error around 25% of the blue progress bar, with no further explanation apart from "System update failed, previous configuration restored" after rebooting.
If, instead, I use the cwm recovery to flash the same file UL-K012-WW-12.8.1.38-user.zip from external SD I get this error:
"Can not upgrade from JB , this is a "4.3"
Error in /external_sd/UL-K012-WW-12.8.1.38-user.zip
(Status 7).
The same errors are shown if I use an earlier version of the firmware...
What am I doing wrong?
Thanks for your help.
Kind Regards,
Fabio