Hello my friends
I sent my phone to LG and they repaired my phone
before it my phone got booloop and It was running on Camuix4
And they flashed phone with 20e firmware
now i cant flash anything with LGUP because it shows me that (DLL for H81820e is not installed properly)
I checked the cust.prop file and it shows me (ro.lge.swversion=H81809a and ro.lge.swversion_short=v09a)
My phone is H818P and running on V20e
Please Help me to install a rooted rom again
Edit: dd command in the download mode doesnt work because it says (Fail)
Sorry for my bad English
HAHA finaly i found a way to fix
Uninstall LG Drives-LGUP-LG DLL Files with Uninstallers app
Restart system
Install newest drives (I installed ver4.0.4)
install LG dll then LGUP
connect your device and start flashing
Related
While flashing kdz through flash tool for my D855 Singapore model, I am getting Error at 2%. I have correctly installed the drivers and changed ports but no use. I am currently on kitkat. I am even unable to install TWRP recovery also as it is going into fastboot menu instead of TWRP. Anyone help me how to flash without error??
Get Last LG driver,30B MM and How to install KDZ from http://devtester.ro/projects/lg-firmwares/
This is switching to download mode automatically.
If still not working , use LG G4 style , in Flash tool , phonemode using CSEmergency.(this is because didn't see G4)
Both I've been tried and working.
Do with your own risk.
(don't click OK if you saw connection to server error.)
I dont understand why this happens because i follow the rules exactly.
I was using MM with TWRP+Root.(Not kingroot or other, just SuperSu 2.52) I was flashed .zip file from Xda. I mean i was using L and after that .zip files pops out for MM, i just simply flash the MM zip file and got it worked.
After flashing kdz file with LGUP now my phone stuck at twrp. Now i stuck at twrp. I tried to restore my backup on external_sd but didn't work either. Any ideas?
LG Up can't wipe twrp , so tried flashing again with LG Flashtool with lastest driver.
fOxunO said:
LG Up can't wipe twrp , so tried flashing again with LG Flashtool with lastest driver.
Click to expand...
Click to collapse
I was trying this but Lg Flash Tool Stuck at %60. I was not update LG Drivers maybe because of this. I dont know what to do now. What must i have to do?
http://i65.tinypic.com/2u4op37.jpg
Phone shows nothing but %0
Afterr battery pull and restarting the process with new drivers, now LG Mobile Support Tool says device is disconnected. I'm confused.
okanb3 said:
I was trying this but Lg Flash Tool Stuck at %60. I was not update LG Drivers maybe because of this. I dont know what to do now. What must i have to do?
http://i65.tinypic.com/2u4op37.jpg
Phone shows nothing but %0
Afterr battery pull and restarting the process with new drivers, now LG Mobile Support Tool says device is disconnected. I'm confused.
Click to expand...
Click to collapse
I had same problem with it being stuck at 60% what I did was not to press cancel or unplug but pressed retry and it worked. Also change the language to English and the question marks will disappear.
As for the device disconnected issue i'm not sure how to solve that one you could try running flashtool in windows 7 compatible mode.
okanb3 said:
I was trying this but Lg Flash Tool Stuck at %60. I was not update LG Drivers maybe because of this. I dont know what to do now. What must i have to do?
http://i65.tinypic.com/2u4op37.jpg
Click to expand...
Click to collapse
When can't go , I choose phonediag to CSEmergency flashing can finished.
I have use CSEmergency 3 times sucsessfully with CSE Flash and newest driver.
Solved my problem. The problem was using LGUP firmware to go back to stock. LGUP Doesnt work if you had root+twrp. Flashed kdz using the Lg Flash Tool 2014 ( I had really more problems when doing this but i made it.) Phone back to normal.
Hi everyone,
It's been some time since I last came here.
I am facing a problem in my LG G3 and was wondering if anyone here can help me.
My phone is D855 was on V21A, Global ROM, rooted. I was thinking about updating to 6.0, so I used Autorec to flash TWRP to backup everything before the update. After Autorec I used terminal emulator (as I always do) to reboot into recovery. And then, the phone kinda died. The screen is always black, no LED blink nothing.
When I connect the phone to the PC it gets recognized as AndroidNet USB port.
I look through the forums for solution and came across this:
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
I opened up the phone and did the short-wire and my phone got recognized as Qualcom 9008. I used the tool named: BoardDiag and it could copy stuff to my phone.
However, the issue that I faced was that I could not locate the TOT file of V21A. I tried the TOT of V10E and it did not work.
I tried following the method of LGExtract tool to turn the KDZ file to TOT but that did not work either. What happened is that the tool turn the KDZ to CAB and then when I try to extract the CAB it says that it is corrupted. Tried another KDZ from another source and the same result.
What I need now is one of two things:
Either the TOT file of Global V21a
or a working method for KDZ to TOT conversion.
Thanks for any suggestions.
[UPDATE]
I tried renaming the KDZ to TOT but it could not be extracted to the right MBN files.
I am facing the same problem with my LG G3 D850. I flashed a D851 Variant version of the rom and after fixing the hard brick part i am stuck flashing the .tot file because its considering my phone as D851 model. I tried to flash the LGUP_8974.dll to try to fix it and nothing.
Dr.Alani said:
Hi everyone,
It's been some time since I last came here.
I am facing a problem in my LG G3 and was wondering if anyone here can help me.
My phone is D855 was on V21A, Global ROM, rooted. I was thinking about updating to 6.0, so I used Autorec to flash TWRP to backup everything before the update. After Autorec I used terminal emulator (as I always do) to reboot into recovery. And then, the phone kinda died. The screen is always black, no LED blink nothing.
When I connect the phone to the PC it gets recognized as AndroidNet USB port.
I look through the forums for solution and came across this:
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
I opened up the phone and did the short-wire and my phone got recognized as Qualcom 9008. I used the tool named: BoardDiag and it could copy stuff to my phone.
However, the issue that I faced was that I could not locate the TOT file of V21A. I tried the TOT of V10E and it did not work.
I tried following the method of LGExtract tool to turn the KDZ file to TOT but that did not work either. What happened is that the tool turn the KDZ to CAB and then when I try to extract the CAB it says that it is corrupted. Tried another KDZ from another source and the same result.
What I need now is one of two things:
Either the TOT file of Global V21a
or a working method for KDZ to TOT conversion.
Thanks for any suggestions.
[UPDATE]
I tried renaming the KDZ to TOT but it could not be extracted to the right MBN files.
Click to expand...
Click to collapse
Same problem here.
did you find a solution????
Please HELP
.....
I used the same short-wire method and flashed the only TOT I could find, which was 10E. However, this time I flashed the system partition as well. In the guide it says it would take a long time so don't do it. I did it anyway. It took reeeeeeeeeaaaaalllllly long time. Over 4 hours.
After finishing flashing I place back the battery as indicated in the guide and the phone restarted and was stuck at LG screen. I connected it to the computer and it was finally recognized as an LG Android phone.
Then I used the official LG update tool. It detected the phone and said there was an update. I proceeded with the update and everything went back to normal. I even had the same data and apps because I did not overwrite the data partition.
I hope this helps.
Sent from my LG-D855 using XDA-Developers mobile app
Dr.Alani said:
I used the same short-wire method and flashed the only TOT I could find, which was 10E. However, this time I flashed the system partition as well. In the guide it says it would take a long time so don't do it. I did it anyway. It took reeeeeeeeeaaaaalllllly long time. Over 4 hours.
After finishing flashing I place back the battery as indicated in the guide and the phone restarted and was stuck at LG screen. I connected it to the computer and it was finally recognized as an LG Android phone.
Then I used the official LG update tool. It detected the phone and said there was an update. I proceeded with the update and everything went back to normal. I even had the same data and apps because I did not overwrite the data partition.
I hope this helps.
Sent from my LG-D855 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank you,
This is very helpful for me and all V21A owners.
Thaaaaaaaaaaanks.
LoRd4LoL said:
Thank you,
This is very helpful for me and all V21A owners.
Thaaaaaaaaaaanks.
Click to expand...
Click to collapse
I also short wired. Now I am looking for a TOT file. I had stock lollipop for lg g3 canadian version (d852) but i cannot find the tot file for lollipop. I have tot files for marshmallow and kitkat. Will that work?
I am downloading a lollipop 20g kdz file. Not sure if it will work. Plz help. Thanks.
Hello Everyone,
i need help reviving my lg g4 and i search all the forms but no avail. I just got a G4 4 days ago only it was running lollipop and working fine i just check for the MM update in phone but there was no update so as i previously own a lg g4 with flumics rom so i decided to flash a kdz with MM update. I see my model no. as h815 so i download H81520h_00_0516.kdz and flashed it through lg flash tool 2014 it flashed without no error but after the flash i got no display in phone just blue led flashes and i hear lg boot sound and then just nothing on phone display it switched off itself. I try to go into hard reset but again no display i try to go into download mode again no display. I attached it to pc it shows LGE Mobile USB Composite Device. Although it shows in lgup tool as H815 and port no. as well.I search my model no. through IMEI i found that it is actually F500L model as i see Korean as it flashed 1st time in download mode. After some research i manage to go into download mode by removing the battery and attaching the phone to pc as it shows empty battery icon so i inserted the battery by pressing the vol up button it goes into download mode. So i try to flash the right firmware which is F500L20u_00_0504.kdz bhut lgup says it invalid kdz i try to flash it through lg flashtool2014 but it says cannot connect to server and failed with contact system administrator. Although it flashes H815_EU_10C_00.kdz and India H818N10d_00.kdz firmware's but those give no display at all i tried it with Lg Bridge as it shows update avalable F500l and it download it but failed to flash it. I try flashing korean tot file LGF500LAT-00-V11d-LGU-KR-SEP-21-2015+0.tot through lgup tool but again it said invalid tot file So friends i am stuck and looking for 5 days to find any solution So anyone can please help me i just used it for 1 day . So can anyone help me.
You have to edit a F500L kdz with a hex editor and replace every F500L to H815 or something that flashes without error
First, if it's H815, you're to flash an H815 kdz with LG up
http://storagecow.eu/index.php?dir=Xda/LG+G4/H815/
Put into download mode and refurbish the kdz accordingly.
Hi all,
I was wondering, once I have custom firmware and recovery on my lg g4, will I be able to reinstall the software from LG Bridge. I understand that I could use the kdz downloaded by it in LG UP, but I was wondering, if I put my phone in download mode, could the update error recovery utility in LG Bridge also reinstall it?
Thanks in advance for your help
ThePiGuy said:
Hi all,
I was wondering, once I have custom firmware and recovery on my lg g4, will I be able to reinstall the software from LG Bridge. I understand that I could use the kdz downloaded by it in LG UP, but I was wondering, if I put my phone in download mode, could the update error recovery utility in LG Bridge also reinstall it?
Thanks in advance for your help
Click to expand...
Click to collapse
I tried this recently just to see what it does, but it even didn't recognize the phone. So you probably need to use LGUP (which I used to go back to stock on my G4) or TWRP to flash something else.
SuperBommel said:
I tried this recently just to see what it does, but it even didn't recognize the phone. So you probably need to use LGUP (which I used to go back to stock on my G4) or TWRP to flash something else.
Click to expand...
Click to collapse
I just tried it and interestingly if the phone is in download mode, it does get recognized as an LG device and will initiate an Update Error Recovery