Hey there , to start off , Im pretty new to putting android and stuff on here haha. Well I finally got it to boot up android using Haret.exe , but then today I decided I wanted it fully on my system without windows...well heres the problem
I flashed the kaiser by holding the camera button and hiting the reset button...which worked fine. Well after I did that , I hit the reset button , and the AT&T symbol came up , then after a few seconds the Penguin Boot screen comes up and starts doing the weird script thing , then I hit the Dpad to install. When It come to the screen , I make sure that Both NAND things are bubbled off , then I go at it and hit install , and clear all data etc , then it goes to formatting. And after everything is complete I go to quit , then it does some more black screen script stuff and then it started booting the green weird logo ( not the android , the one for Froyo 2.2 ) and then after a few minuites it finally boots up. I then wait 10-15mins for it to finish everything once installed , and then I turn it off by battery pull ( and normal shutoff , ive tried both). then when I turned it back on , It STILL goes to the at&t logo , and repeats EVERYTHING above..please help ,I have tried everything here , and nothing seems to work.....ahhh im so confused haha.
Regards , Dread
What is the problem? Does it boot into android after that? It sounds like you are just describing what happens when android boots normally.
If it's the AT&T logo you don't like, search on this forum for splash screens, there are lots of replacements to choose from.
It boots into android after that , but when I turn it off , I have to go through the whole install screen agian and then it has all the same settings , its just very annoying
Are you pressing the D-pad and installing every time you boot? You only need to install it once....
The second time you turn it on, just don't press anything while it's booting, and it will go straight into android, with all your settings saved.
so why does it go to the weird boot text penguin screen? shouldnt android start up as soon as the phone boots? or is it supposed to be penguin screen , then android load screen?
it's not weird, all phone (and linux system) boot in this way.
Oh alright , Is there any way to make it into a bootlogo?
DreadCode said:
Oh alright , Is there any way to make it into a bootlogo?
Click to expand...
Click to collapse
Not at the moment, but right now the text screen is there to show that the phone is actively booting into Android. Once it gets to a certain point, the Android boot logo will start, and the text screen goes away.
I know it looks messy, but look at it this way. You're able to see just what the phone is doing during boot, and see that the phone is still booting and not freezing up and crashing.
He can make a splash screen, just not one to cover the kernel bootloader. I have one that got left over on ths phone after a modded wm6.5 rom. I keep it because it shows CPU, memory and ROM/radio verson in the 2nd splash.
Sent from my Not So Super Froyo using XDA App
I can put a boot image while the kernel initializes but the text will still overlap it due to framebuffer issues.
another way is set the output to a virtual terminal so is not visible.
Ok
i updated the firmware with odin last version to this OFW T210XXANC2_T210OXXANC2_T210XXANC2_HOME.tar.md5
All worked fine and the tablet kept the data, etc.
Now i installed the cwm and the 'android-armeabi-universal-root-signed.zip' from it.
For some reasson the tablet now is bricked for unknown reassons and its screen doesnt respond to finger touchs.
The tablet buttons and sound and booting works, but because the screen doesnt detect touchings, i cant do anything.
I have tried to install other cwm versions etc, and to reinstall the firware, and also that pre-rooted firmware on this forums, reset factory from cwm, etc. No success unfortunatelly.
Please help
anybody ?
i have installed kitkat firmware, the screen doesnt respond touchs
i have installed last jelly bean firmware, the screen doesnt respond
i have installed stock firmware, stucked in the samsung logo
help !
rotation sensor works, buttons works.
same problem ....
arfgh said:
anybody ?
i have installed kitkat firmware, the screen doesnt respond touchs
i have installed last jelly bean firmware, the screen doesnt respond
i have installed stock firmware, stucked in the samsung logo
help !
rotation sensor works, buttons works.
Click to expand...
Click to collapse
You have installed a rom for ROmanian Tab 3 7' Wifi, if you rezolved the problem please let me know how you did it becouse i have the same proplem and i tried everything , i try to install - uninstall a lot of ROM'S Kernel but no response the TAB3 is suck in Samsung logo or TAB 3 Logo . Please Help with a working rom or kernel ...
I had this when playing around with stock kit kats italy to france holland then back to stock jely bean then nole kat rom
Flash the stock firware for yhe tab with odincheck auto restRt and ftime is only on
Right after its near the end off flashing its gonna reboot keepp cable connect still
And hold home button and volume up when it turns off from downloading screen
get in stock recovery mode wipe cache and factory wipe
And reboot system
As its reboot hold home and volume down to get downloading screen
check at top thats its both offical if yes power off and start up
If no reflash again and do the same then it work to setup
Most off the time 2 flashes off stock does the job
So i googled edition my phone a while ago and yesterday i installed xposed for lollipop and today there is this black line in the middle of my phone screen. i know its not a hardware issue bc in recovery mode the screen is fine and everything is clear but once the phone is booted it has a black line that almost looks like its flickering. can any one help me solve this i dont wanna buy a new screen or anything like that. i have reset the phone and flashed also the GPE RUU twice
hi guys,
i know you all have seen this problem many times in the threads. but i am seriously having trouble with my phone.
the thing is that: the phone boots .. shows the sony logo.. shows the XPERIA logo later on. and it boots my homescreen too.. but this is more fascinating.. after i get the home screen after unlocking the screen. it just vanishes like the vanish-effect of some themes. and it reboots. have been facing this a lot..
i cant even get into the recovery mode with power+ volume down.
been more than a week. i am trying to find a solution online. but cant.. read most of the threads but all seem to have stuck in the boot screen.
my phone is unrooted.. runs 2.3
HELP!!!!
romusht said:
hi guys,
i know you all have seen this problem many times in the threads. but i am seriously having trouble with my phone.
the thing is that: the phone boots .. shows the sony logo.. shows the XPERIA logo later on. and it boots my homescreen too.. but this is more fascinating.. after i get the home screen after unlocking the screen. it just vanishes like the vanish-effect of some themes. and it reboots. have been facing this a lot..
i cant even get into the recovery mode with power+ volume down.
been more than a week. i am trying to find a solution online. but cant.. read most of the threads but all seem to have stuck in the boot screen.
my phone is unrooted.. runs 2.3
HELP!!!!
Click to expand...
Click to collapse
you probably need to reflash the stock firmware (all data will be lost)
http://talk.sonymobile.com/t5/Andro...y-Bean-ICS-Ice-Cream-Sandwich-and/td-p/154389
Hi everyone,
My parents have a TCL U43P6036 (but hardware says P6046) that keeps shutting down at boot just after the dots animation/before the Android logo.
I don't have a clear backstory of the problems before this but I know the screen started to become darker on a side, there was also a moment when there was no image but the sound was working, and finally this problem of shutting down at boot.
It happens 100% of the time.
I tried a hard reboot but I'm not even sure the buttons under the screen are working for that purpose as there's not clear volume down button (the buttons are like "<", power/menu, ">"). And my attempts at a hard reboot all failed (Android says "error" and just reboots, then the TCL logo shows up and "error" again, etc.)
There's no reset button too, so I can't even try that.
Now I think the next step is trying to flash it but I'm not even sure of the version of Android. The manual says "Android N (7.0), O (8.0) Q3 ‘18 updt" but I don't know what it really says (is the OS Nougat 7 or Oreo 8?). I know some auto updates have been done.
Anyway, I'm stuck and not sure about the real problem here...
Update: tried to flash it but nothing happened at all. The TV starts like usual, then shuts down after the dots animation/before the Android logo... I don't even know if it detected the USB drive...