hi, my 5x is bricked, symptoms are following: it turns on and only goes to bootloader and download mode. adb/fastboot doesn't work and there isn't recovery. when booted to bootloader device manager detects as some kind of android device(Port_#0002.Hub_#0004), when in download mode device manager detects under ports/com as port 6. any help or advice will be highly appreciated
Keep it overnight in bootloader mode to discharge battery.
Next day connect it to a PC to charge it slowly, turn it on later without charger (try to charge max to 15%)
It should boot in power saver mode.
Later try to disable 4 and 5 core and it should be working.
If not, you need to use heating method
ok, I will try that, but I think there isn't os at all, so how it boots in power saver mode? when I turn on it automaricaly goes to download mode
Domin_PL said:
Keep it overnight in bootloader mode to discharge battery.
Next day connect it to a PC to charge it slowly, turn it on later without charger (try to charge max to 15%)
It should boot in power saver mode.
Later try to disable 4 and 5 core and it should be working.
If not, you need to use heating method
Click to expand...
Click to collapse
How can I disable the cores? Developer mode?
Edit: Found https://forum.xda-developers.com/ga...p-quad-core-manager-ultimate-battery-t2369297
Related
Hi guys, I'm here because I'm deseperate. My arc s won't boot if i press the power button or if I connect it to pc . It has no os because i format the system folder while I was trying to flash a rom, and the battery is surely dead. I cannot enter neither in fastboot nor in flashmode. Is there any way to charge the phone so that I can flash any firmware? Or should I buy another battery?
SilverSurfer(MrAllIn) said:
Hi guys, I'm here because I'm deseperate. My arc s won't boot if i press the power button or if I connect it to pc . It has no os because i format the system folder while I was trying to flash a rom, and the battery is surely dead. I cannot enter neither in fastboot nor in flashmode. Is there any way to charge the phone so that I can flash any firmware? Or should I buy another battery?
Click to expand...
Click to collapse
Keep it in charge even if the phone does not show anything, it will charge.
i had the same issue with Ray i erased the kernel and battery died i kept it in charge for 10min and it started in fastboot mode
ManthanRB said:
Keep it in charge even if the phone does not show anything, it will charge.
i had the same issue with Ray i erased the kernel and battery died i kept it in charge for 10min and it started in fastboot mode
Click to expand...
Click to collapse
Thanks for the reply, but I don't think it works., because i've plugged it for at least one day and still can't enter in recovery or do anything :crying: any tips?
SilverSurfer(MrAllIn) said:
Hi guys, I'm here because I'm deseperate. My arc s won't boot if i press the power button or if I connect it to pc . It has no os because i format the system folder while I was trying to flash a rom, and the battery is surely dead. I cannot enter neither in fastboot nor in flashmode. Is there any way to charge the phone so that I can flash any firmware? Or should I buy another battery?
Click to expand...
Click to collapse
It will go in Fast boot mode Just press Menu key(on my neo v its on right side of home button) and see if blue led turn on in your arc.
if your device still not entering on fastboot mode and you want to charge your mobile battery then find any compatible universal charger for your device
I guess by saying "universal charger" what fenix meant was a spare battery charger which, charges batteries while unattached from the phone itself... or he/she probably was referring to something else.
anyway, the spare battery charger that I know looks like this:
http://www.ebay.com.au/itm/BA750-Ba...Arc-XPERIA-Arc-LT15i-Xperia-X12-/170822357636
or you can just search through google for it using the keywords "spare battery charger LT15i anzu".
good luck!
Hi all, i have problem with my P8000. My phone was discharged to 0%, and then i cant turn on phone. When i plug it to charger, blue circle do not light. i try to do:
1. Hold POWER - phone starts but when display elephone logo (1 second) telefon turn off
2. Hold POWER and POWER + - phone gone to bootloader, and them whatever i choose (recovery, normal) phone starts but after shown elephone logo turns down (like 1.)
3. Flashed stock rom via Flash tool (format + download) - like 1.
4. I have unpluged battery
after all, phone cant start... Someone can help me?
I think you have to leave it charging for a while before you are able to turn it on again. Just give it some time
jman0 said:
I think you have to leave it charging for a while before you are able to turn it on again. Just give it some time
Click to expand...
Click to collapse
I charged it for 48h and i cant turn it on...
mczlowiek said:
I charged it for 48h and i cant turn it on...
Click to expand...
Click to collapse
Try another charger/usb cable, just in case the one you're using is defective, or charge the phone connected to a computer
jman0 said:
Try another charger/usb cable, just in case the one you're using is defective, or charge the phone connected to a computer
Click to expand...
Click to collapse
another charger/usb cable did not solve my problem. When i plug phone into computer, then computer recognize it. I flashed stock rom with flastool, but problem was the same.... I changed battery (buy new one) but problem is this same...
blimps
mczlowiek said:
another charger/usb cable did not solve my problem. When i plug phone into computer, then computer recognize it. I flashed stock rom with flastool, but problem was the same.... I changed battery (buy new one) but problem is this same...
Click to expand...
Click to collapse
Hi,
I have/had the same problem. The problems started, with the phone powering down, at half the battery level. Then I got a spanish battery overheating message. After the message appears, the problem starts.
I solved the problem like this :
First you have to completely drain your battery. How to do that ?
- Go to the boot-menu (press power on button, and volume up at the same time). Select : Fastboot. The phone will halt. BUT, keep your phone in that state, so it consumes energy. After a while your phone will go out. After that : go again to your boot menu, but DON'T select any options. After a period of ± 5 minutes your phone will go out.
- THEN : remove your SD-Card, and SIM-Card.
- THEN : Connect your phone with the net-usb-charger. DON'T connect it to your PC.
- After 1 to 2 hours of chargeing, your down center button, should start glowing blue again.
I got my phone working again 2 times using this method.
I hope it works for you.
Phone Restored with this method! Thanks pal!
worked for my phone
thank you very much
Hi,
asus zenfone 2 not charging or turning on. just the symbol as attached pic.
when connected to charger it get vibrates and turn on with charge symbol and after few mins goes off. and this repeats. Please someone help on this. Appreciate your help.
if u can acces the bootloader menu (press the power button until the phone turn off then press volume up + power when it vibrate release the power button only) u can install the stock rom using this guide "http://forum.xda-developers.com/zenfone2/general/wwze551ml2-20-40-19420160713-raw-t3437416"
if can´t acces to bootloader u have to do this "http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256"
lineu94 said:
if u can acces the bootloader menu (press the power button until the phone turn off then press volume up + power when it vibrate release the power button only) u can install the stock rom using this guide "http://forum.xda-developers.com/zenfone2/general/wwze551ml2-20-40-19420160713-raw-t3437416"
if can´t acces to bootloader u have to do this "http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256"
Click to expand...
Click to collapse
Hi lineu, Thank you so much. I'm trying the 2nd method which you advised as dont have access to bootloader itself.
during this step, when using xFSTK Downloader 1.7.0, in download status i can see
"Details: BATI:42415449: Batter voltage: 0x45(1294.760000V) The threshold: 0xbf(3.585000V)" and progress bar shows only 8% for a longer time. am i missing something.
My phone is in dead state, i cannot even see charging icon in the screen. Appreciate your help on this. Please help. Attaching the screenshot for your reference.
I think that error is because the battery go to 0%, any chance to extract it and charge manually? With that process u recover the bootloader and later u can use the Asus flash ttools
Or try again the procedure (u can see if the windows device manager recognize the morefield driver when u connect the phone)
how to charge battery manually? as when i connect to the charger it is not getting charge.
suracesh said:
how to charge battery manually? as when i connect to the charger it is not getting charge.
Click to expand...
Click to collapse
just leave it on charge for few hours
Hi Guys,
I have a problem with this device about years ago. As I'm playing Vainglory, my tab turned off instantly then after trying to turning it on again, nothing happens, I thought it just ran out of battery. I tried to charge it but only the charging battery icon shows up but it doesn't charge even if i left it overnight. I tried to access it's recovery mode but it bootloops only. BUT I can access the download mode easily but If I try to connect it to PC then boot it in download mode. It just die and bootloop. I know that only the download mode can help me on this. I just can't simply use odin/kies cause my device doesnt connect to PC. Tried to use different cables/Reseatting the battery but nothing happens.. Also, it only boots/respond when connected to a charger. Is this soft bricked?Please help... Thank You.
After I try to flash twrp using Miui 11 the device turned brick, follow the tutorial to resurrect the RN8PRO without using Mi Authorized Account:
0 - If your RN8PRO turns brick and is connected to USB on the pc just 5 seconds make this tutorial.
1 - This method works only if you have installed TWRP and the device turned brick.
2 - Disassemble your device by doing test point your device asks for mi.
3 - After trying to pass the official rom via miflash or sptools, the RN8PRO asks for the authorized account. CANCEL.
4 - Disconnect all devices from the motherboard, GPS, 3G ANTENNA, CAMERAS and WIFI, leave only the battery on, if the procedure does not work disconnect the battery too.
5 - At this point your device will be working perfectly, plug in the USB cable, press the power button + volume button - the device will go into fastboot, flash to rom STOCK by miflash leaving selecting the Clean All option only. Wait to flash the rom , this process may take 15 minutes.
6 - After Flash your device will turn on normally, turn off the device, remove the USB cable, reconnect all previously disconnected devices, close the device and turn on again.
7 - Ready your device will be working again. :fingers-crossed:
8 - If the procedure is unsuccessful, wait for 4 to 5 days for his battery to completely exhaust, charge it for 3 hours and then redo the process. :good:
portugueiz2 said:
After I try to flash twrp using Miui 11 the device turned brick, follow the tutorial to resurrect the RN8PRO without using Mi Authorized Account:
0 - If your RN8PRO turns brick and is connected to USB on the pc just 5 seconds make this tutorial.
1 - This method works only if you have installed TWRP and the device turned brick.
2 - Disassemble your device by doing test point your device asks for mi.
3 - After trying to pass the official rom via miflash or sptools, the RN8PRO asks for the authorized account. CANCEL.
4 - Disconnect all devices from the motherboard, GPS, 3G ANTENNA, CAMERAS and WIFI, leave only the battery on, if the procedure does not work disconnect the battery too.
5 - At this point your device will be working perfectly, plug in the USB cable, press the power button + volume button - the device will go into fastboot, flash to rom STOCK by miflash leaving selecting the Clean All option only. Wait to flash the rom , this process may take 15 minutes.
6 - After Flash your device will turn on normally, turn off the device, remove the USB cable, reconnect all previously disconnected devices, close the device and turn on again.
7 - Ready your device will be working again. :fingers-crossed:
8 - If the procedure is unsuccessful, wait for 4 to 5 days for his battery to completely exhaust, charge it for 3 hours and then redo the process. :good:
Click to expand...
Click to collapse
This is good for a last resort.. Specially since this phone doesn't have water proofing..
Thread cleaned
Please do not request/advertise/exchange remote unlock services on xda-developers(see Forum Rules 7,11,13):highfive:
Thank you all!
strongst
Forum Moderator
Hi, my r8 pro has bricked recently, i'm really scared, can you help me? i already tried these options:
°boot > recovery = black screen
°boot > fastboot = black screen
°boot = black screen
°i disassembly my cellphone and disconected and re conected the battery but nothing
°i'm trying to drain battery power to 0% because it was charged to 80% and now i'm connecting some things to negative and positive parts of the cable of the battery to consume energy and drain the battery
°i tried "test point" but it is the same has enter to the recovery (vol+ pwr) because it boot to the recovery, and it ask me for MI account authorized when i try to flash stock rom in sp download tool
my redmi note 8 pro only led blinks when i connect the usb to my pc or when i charge it.
Can you help me? please. my discord
zumboy#2354
zumboy said:
Hi, my r8 pro has bricked recently, i'm really scared, can you help me? i already tried these options:
°boot > recovery = black screen
°boot > fastboot = black screen
°boot = black screen
°i disassembly my cellphone and disconected and re conected the battery but nothing
°i'm trying to drain battery power to 0% because it was charged to 80% and now i'm connecting some things to negative and positive parts of the cable of the battery to consume energy and drain the battery
°i tried "test point" but it is the same has enter to the recovery (vol+ pwr) because it boot to the recovery, and it ask me for MI account authorized when i try to flash stock rom in sp download tool
my redmi note 8 pro only led blinks when i connect the usb to my pc or when i charge it.
Can you help me? please. my discord
zumboy#2354
Click to expand...
Click to collapse
Discharging battery will only be useful for when recovery/boot are not crashed. When anything happened, installing twrp, boot image etc, it will very easy to crash, based on your desc, it's hard bricked, need authorised account to refresh. Prepare for $30 to deep flash....