Lineage OS Kernel and Official status - Google Pixel XL Questions & Answers

Lineage OS Kernel and Official status - Google Pixel XL Questions & Answers

Does anyone know if there are any custom kernels that will work with lineage 14.1 for our pixel? I am currently running the unofficial Lineage OS 14.1 build from invisiblek.
Also, does anyone know when we will get official lineage OS?

I've tried this build but it just stuck in boot animation forever, how 've you managed to install it?

We will get official lineage os builds, if the gapps problem is solved and we can flash the usual gapps. (opengapps)
---------- Post added at 09:25 PM ---------- Previous post was at 09:20 PM ----------
psrb191921 said:
I've tried this build but it just stuck in boot animation forever, how 've you managed to install it?
Click to expand...
Click to collapse
Just go the usual way for Pixel XL
1. wipe, dont need to wipe internal storage
2. flash rom, flash twrp
3. reboot again to recovery and flash gapps. (because slot a and b blablabla) <---- if there is an gapps included go to step 4!
4. reboot and set up phone.
and if u want...
5. reboot to recovery and flash SuperSU
however on the CM14.1 Hexa-Project rom ull need to go another way... i got problems with the upper one.
1. wipe
2. flash rom and twrp
3. reboot and set up the phone
4. reboot again to twrp
5. flash supersu
6. mount system and flash gapps
7. wipe data and reboot
Cheers!

Thanks, I've done it the same way, except for the gapps (i don't need gapps/whatever-google at all) with no success it just stuck in boot animation, do i need gapps to make it work? (I want my droid to be as free/open source as possible though)
Offtopic: i've built aosp for pixel (with lastest vendor.img from google) and it works great, but the fingerprint sensor doesn't work at all did you have this issue when you built lineageos? (Sry for offtopic)

Related

Resurrection Remix N installation

Hi!
I want to install [ROM][7.1] RESURRECTION REMIX N [5.8.0][BJRR][OxygenCam] 29.11.16.
I understand how to go to bootload, recovery, use adb, fastboot etc.
I just lack of some practice.
My question is, in which order install/flash everything?
It's written
INSTALLATION INSTRUCTIONS
- Download the latest build
- Download Gapps
- Take a nandroid backup
- Recommended - Full wipe and factory reset
- Flash ROM using latest Recovery
- Flash Gapps
- Reboot.
- Enjoy!
Installation Files
1.) Required twrp
2) Required Firmware & Modem 3.5.5-CE
3.) rom
4.) Open Gapps
Click to expand...
Click to collapse
I don't know which firmware/modem I'm using since I installed TWRP, OxygenOS Open Beta 8 (Nougat), then messed up and returned to 3.2.6 with original recovery etc.
I'll unlock the bootloader again, install TWRP in order to flash the ROM, Gapps and firmware/modem (just in case I guess).
But, at which step I should flash firmware/modem? After flashing rom and before gapps or at some other point?
Thanks a lot for your help!
(Oh, and I sure hope I'm in the right section of the forum!)

Failed Install of 4.0.1 causes twrp loop?

So I was running stock 4.0.0 with twrp recovery just fine, and go to update via ota the 4.0.1. Now this failed, and so I decided I might as well clean install. After installation now, regardless of rom (even lineageos based) I cannot boot out of twrp. Every reboot leads back to twrp. I can access fastboot, but thats it. I've tried reflashing twrp also
Edit: This is ridiculous. Literally everything looks perfect but it refuses to boot. Tried every rom I can, even tried different recoveries and ****ing nothing. I can't find any rhyme or reason to this nonsense.

Shayded said:
So I was running stock 4.0.0 with twrp recovery just fine, and go to update via ota the 4.0.1. Now this failed, and so I decided I might as well clean install. After installation now, regardless of rom (even lineageos based) I cannot boot out of twrp. Every reboot leads back to twrp. I can access fastboot, but thats it. I've tried reflashing twrp also
Edit: This is ridiculous. Literally everything looks perfect but it refuses to boot. Tried every rom I can, even tried different recoveries and ****ing nothing. I can't find any rhyme or reason to this nonsense.
Click to expand...
Click to collapse
I'll tell you exactly the same as the last one...
First of all... YOU can NEVER try to install an official update having a custom recovery (like TWRP) installed in your device. Previously, you should have changed to stock recovery.
Having said that, you have to make the following....
1. If you have already the full room into internal memory, reboot into recovery. If not, copy the full rom to a pendrive an connect it by OTG.
2. Restart in recovery mode and click on wipe and then, advance wipe and select... davilk, cache, data and system partitions. then, slide the bar.
3. When it finish, go back to the main menu and click on install. Select the full rom from internal storage (or OTG) and install it.
4. When it finishs, you have two options from here...
4.1. First option. Try to install TWRP recovery before rebooting, because the rom will have installed stock recovery. After flashing twrp, theoretically you should get twrp installed but sometimes it fails. So, It is possible it is blocked when you try to reboot system and you can see a warming saying "there is not rom installed". Don't panic, turn off your phone from power bottom and restart the device. You will see the room installed but not the twrp. In this case, you will have to install TWRP from sideload and then, Supersu from recovery.
4.2. Second option. When the rom instalation has a finished, reboot system to check the rom is installed correctly. Then, restart again your device to fastboot mode and install recovery twrp from sideload. Finally, you can install Supersu from recovery.
This is all! Never settle!

Flash stock recovery? Does it boot?

I have the exact same problem and in stuck in a pickle
---------- Post added at 08:15 AM ---------- Previous post was at 08:12 AM ----------
Crazyhat said:
I'll tell you exactly the same as the last one...
First of all... YOU can NEVER try to install an official update having a custom recovery (like TWRP) installed in your device. Previously, you should have changed to stock recovery.
Having said that, you have to make the following....
1. If you have already the full room into internal memory, reboot into recovery. If not, copy the full rom to a pendrive an connect it by OTG.
2. Restart in recovery mode and click on wipe and then, advance wipe and select... davilk, cache, data and system partitions. then, slide the bar.
3. When it finish, go back to the main menu and click on install. Select the full rom from internal storage (or OTG) and install it.
4. When it finishs, you have two options from here...
4.1. First option. Try to install TWRP recovery before rebooting, because the rom will have installed stock recovery. After flashing twrp, theoretically you should get twrp installed but sometimes it fails. So, It is possible it is blocked when you try to reboot system and you can see a warming saying "there is not rom installed". Don't panic, turn off your phone from power bottom and restart the device. You will see the room installed but not the twrp. In this case, you will have to install TWRP from sideload and then, Supersu from recovery.
4.2. Second option. When the rom instalation has a finished, reboot system to check the rom is installed correctly. Then, restart again your device to fastboot mode and install recovery twrp from sideload. Finally, you can install Supersu from recovery.
This is all! Never settle!
Click to expand...
Click to collapse
Here is the problem tho, I can flash Roms but when I attempte to boot into said ROM it just goes straight back to recovery.
---------- Post added at 08:16 AM ---------- Previous post was at 08:15 AM ----------
Puddi_Puddin said:
Flash stock recovery? Does it boot?
Click to expand...
Click to collapse
Tried that too through adb but didn't work for some reason, I forget. Either I messed up or the phone didn't allow it

urvianoob said:
I have the exact same problem and in stuck in a pickle
---------- Post added at 08:15 AM ---------- Previous post was at 08:12 AM ----------
Here is the problem tho, I can flash Roms but when I attempte to boot into said ROM it just goes straight back to recovery.
---------- Post added at 08:16 AM ---------- Previous post was at 08:15 AM ----------
Tried that too through adb but didn't work for some reason, I forget. Either I messed up or the phone didn't allow it
Click to expand...
Click to collapse
You don't do that with adb but with Fastboot
Boot into fastboot > fastboot flash recovery-file name.img

Here's what I had to do: flash the new stock recovery in fastboot rather than twrp at all, then boot to it FROM fastboot. Sideload the full firmware (4.0.0, 4.0.1 either should work) and reboot/power off. My phone seemingly bricked at this stage but playing around with the buttons got me back into stock recovery where I got the option to decrypt and wipe. After this it booted up unto a fresh install of 4.0.1.

Hi
Puddi_Puddin said:
You don't do that with adb but with Fastboot
Boot into fastboot > fastboot flash recovery-file name.img
Click to expand...
Click to collapse
Yeah that is what I meant to say lol, I found something in another article on the same problem that worked for a guy, gonna try it soon
---------- Post added at 08:31 AM ---------- Previous post was at 08:22 AM ----------
Shayded said:
Here's what I had to do: flash the new stock recovery in fastboot rather than twrp at all, then boot to it FROM fastboot. Sideload the full firmware (4.0.0, 4.0.1 either should work) and reboot/power off. My phone seemingly bricked at this stage but playing around with the buttons got me back into stock recovery where I got the option to decrypt and wipe. After this it booted up unto a fresh install of 4.0.1.
Click to expand...
Click to collapse
OK I get all of it so basically I flash stock recovery from fast boot, boot into the new stock recovery via fast boot, then flash ROM and I'm done?

OTA works ONLY if you are on stock recovery, rom, kernel.
I suggest to format data in recovery (this will wipe ALL in youre phone),
flash modified recovery (.22, .23. 28 by eng.stk),
flash FULL rom,
flash SuperSU 2.79 stable, if you want root,
flash recovery,
reboot to recovery,
reboot to rom.

Shayded said:
Here's what I had to do: flash the new stock recovery in fastboot rather than twrp at all, then boot to it FROM fastboot. Sideload the full firmware (4.0.0, 4.0.1 either should work) and reboot/power off. My phone seemingly bricked at this stage but playing around with the buttons got me back into stock recovery where I got the option to decrypt and wipe. After this it booted up unto a fresh install of 4.0.1.
Click to expand...
Click to collapse
Where can I get the stock recovery download?

something like that happen to me when i try to go back from N to MM oxygen, i managed to fixed it by installing the stock recovery then install the 3.26 plus the 3.26 "modem" (if i didnt install this one, my touch screen wouldnt work) after that it just works, then i updated to 3.28
i havent install twrp and do the root for now because dont have time to tinker yet, but i can just do than whenever i have the time

I think ---- and my solution
I think some script is created as we click update...It's running on boot up and causing this problem...
I had this problem yesterday and it took me a lot of time to get my device to working...
SOLUTION: first backup the data(it backsup apps and such) from twrp and other files which are important for you...copy it to a PC.
follow the second step in this thread(it will wipe everything)
It's not allowing me to post link...It's the mega unbrick guide from Oneplus3 forums
It will take you to older version and then flash full zip(nougat build) from modded twrp..restore the backup..don't update until someone finds a solution...I did that and I'm waiting for a solution to continue...
hope it helps

This is how I solved mine.
1) Go back to stock recovery v2
2) adb sideload oos, flash magisk then flash systemless supersu.

Try this guys, found a way how to flash 36mb OTA file with latest modified TWRP by eng.stk here https://forum.xda-developers.com/devdb/project/dl/?id=22429
1. Download and dirty flash the full 4.0 zip https://drive.google.com/file/d/0BzS3nWITUqU_Sk5yQkRqWkhFY3c/view
2. Flash 4.0.1 OTA (36mb) https://drive.google.com/file/d/0B6FY-XKZtgn4R2d2Rk8xd3AzWVE/view?usp=drivesdk
3. Flash SuperSU
4. Reboot
Sent from my ONEPLUS A3000 using XDA-Developers Legacy app

eko_cahyono said:
Try this guys, found a way how to flash 36mb OTA file with latest modified TWRP by eng.stk here https://forum.xda-developers.com/devdb/project/dl/?id=22429
1. Download and dirty flash the full 4.0 zip https://drive.google.com/file/d/0BzS3nWITUqU_Sk5yQkRqWkhFY3c/view
2. Flash 4.0.1 OTA (36mb) https://drive.google.com/file/d/0B6FY-XKZtgn4R2d2Rk8xd3AzWVE/view?usp=drivesdk
3. Flash SuperSU
4. Reboot
Sent from my ONEPLUS A3000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Did it work for you? For me it keeps booting back to TWRP
---------- Post added at 03:45 AM ---------- Previous post was at 03:17 AM ----------
Shayded said:
Here's what I had to do: flash the new stock recovery in fastboot rather than twrp at all, then boot to it FROM fastboot. Sideload the full firmware (4.0.0, 4.0.1 either should work) and reboot/power off. My phone seemingly bricked at this stage but playing around with the buttons got me back into stock recovery where I got the option to decrypt and wipe. After this it booted up unto a fresh install of 4.0.1.
Click to expand...
Click to collapse
Where did you get new stock recovery? link please

paul369741 said:
Did it work for you? For me it keeps booting back to TWRP
---------- Post added at 03:45 AM ---------- Previous post was at 03:17 AM ----------
Where did you get new stock recovery? link please
Click to expand...
Click to collapse
Yes It works

You can grab the stock recovery in the OP3 toolkit here on xda
https://forum.xda-developers.com/oneplus-3/development/toolkit-oneplus-3-toolkit-unlock-t3398799
Flash through fastboot, then flash/sideload a full stock zip. After that your phone should be back in working order and you can flash TWRP back.
Goodluck!

qyrus said:
You can grab the stock recovery in the OP3 toolkit here on xda
https://forum.xda-developers.com/oneplus-3/development/toolkit-oneplus-3-toolkit-unlock-t3398799
Flash through fastboot, then flash/sideload a full stock zip. After that your phone should be back in working order and you can flash TWRP back.
Goodluck!
Click to expand...
Click to collapse
If my phone is rooted, flashing through fastboot the stock recovery will remove root?

Oreo update for rooted OnePlus 5t

Pls help me updating my 5t to oreo.i am currently on version 4.7.6 with twrp recovery nd super su root.
After updating to Oreo I again want to root my phone
Pls share links to download compatibile ROM, recovery nd super su.zip

But you already have the OREO OOS ROM installed, why not use it? Flash the Oreo recovery from codeworkx through fastboot, make sure to follow the instructions so it sticks and then flash Magisk or any root solution of your choice. It's not hard if you do some searching.

Check in ROMs' threads and come back what your interested ROM is.

What I did was flash the ota to update me to Oreo. Then had to reflash Magisk and kernel.

jcroy2828 said:
What I did was flash the ota to update me to Oreo. Then had to reflash Magisk and kernel.
Click to expand...
Click to collapse
Kernel?

jcroy2828 said:
What I did was flash the ota to update me to Oreo. Then had to reflash Magisk and kernel.
Click to expand...
Click to collapse
Pls give me link to download magisk nd what does kernel mean?

mannulko said:
Kernel?
Click to expand...
Click to collapse
Il check when I get home. I just used Magisk 15.3 from the Magisk xda thread

jcroy2828 said:
Il check when I get home. I just used Magisk 15.3 from the Magisk xda thread
Click to expand...
Click to collapse
I mean pls tell me step by step what should I do.currently I am on 4.7.6 wth twrp recovery nd rooted.i want to update my phone to Oreo nd root again

mannulko said:
I mean pls tell me step by step what should I do.currently I am on 4.7.6 wth twrp recovery nd rooted.i want to update my phone to Oreo nd root again
Click to expand...
Click to collapse
If you have already installed a custom recovery and rooted your phone then you should be able to follow these instructions.
I can personally confirm that I was able to install the beta versions of Oreo and the final version of Oreo without any issues.
Here's what I did:
1. Download full .zip
2. Download Blu_Spark TWRP or Codeworkx TWRP (I personally used Blu_Spark but both should work).
3. Download Magisk 15.3 (I havent used SuperSu in a while so I can't confirm how well it works on Oreo but in my opinion Magisk is a better root method and it works in this version of android).
4. Make sure you have both ROM and Magisk on a easy to find place on your phone.
5. Boot to fastboot and fastboot flash the recovery you just downloaded.
6. Boot to recovery, wipe dalvik and cache and then install the ROM.
7. Once the installation is done, boot to system and wait till the system to finish updating. Once there you can go to settings > phone status and it should read (android version = 8.0.0 and OxygenOS version = 5.0.2, congrats, you're on the latest OxygenOS version for this phone).
8. Reboot to fastboot, and fastboot flash the custom recovery again.
9. Boot to recovery, wipe dalvik and cache again, and flash Magisk, wipe dalvik and cache once more and reboot to system.
10. Once the phone is booted up, you should be rooted with Magisk and on the latest OS.
9. Boot to recovery, wipe dalvik and cache again, and flash Magisk, wipe dalvik and cache once more and reboot to system.
10. Once the phone is booted up, you should be rooted with Magisk and on the latest OS.
NOTE: Since this is a big version update from Nougat, it's always recommended to do a clean flash although not necessary in most cases unless there are issues like big battery drain or when apps or the OS are not working properly. Also, if you are coming from a custom ROM and not the official OxygenOS, then you should definitely do a clean installation (even if said custom ROM is based on OxygenOS).

HueleSnaiL said:
If you have already installed a custom recovery and rooted your phone then you should be able to follow these instructions.
I can personally confirm that I was able to install the beta versions of Oreo and the final version of Oreo without any issues.
Here's what I did:
1. Download full .zip
2. Download Blu_Spark TWRP or Codeworkx TWRP (I personally used Blu_Spark but both should work).
3. Download Magisk 15.3 (I havent used SuperSu in a while so I can't confirm how well it works on Oreo but in my opinion Magisk is a better root method and it works in this version of android).
4. Make sure you have both ROM and Magisk on a easy to find place on your phone.
5. Boot to fastboot and fastboot flash the recovery you just downloaded.
6. Boot to recovery, wipe dalvik and cache and then install the ROM.
7. Once the installation is done, boot to system and wait till the system to finish updating. Once there you can go to settings > phone status and it should read (android version = 8.0.0 and OxygenOS version = 5.0.2, congrats, you're on the latest OxygenOS version for this phone).
8. Reboot to fastboot, and fastboot flash the custom recovery again.
9. Boot to recovery, wipe dalvik and cache again, and flash Magisk, wipe dalvik and cache once more and reboot to system.
10. Once the phone is booted up, you should be rooted with Magisk and on the latest OS.
9. Boot to recovery, wipe dalvik and cache again, and flash Magisk, wipe dalvik and cache once more and reboot to system.
10. Once the phone is booted up, you should be rooted with Magisk and on the latest OS.
NOTE: Since this is a big version update from Nougat, it's always recommended to do a clean flash although not necessary in most cases unless there are issues like big battery drain or when apps or the OS are not working properly. Also, if you are coming from a custom ROM and not the official OxygenOS, then you should definitely do a clean installation (even if said custom ROM is based on OxygenOS).
Click to expand...
Click to collapse
What is clean flash?

mannulko said:
What is clean flash?
Click to expand...
Click to collapse
Wiping data and system partition which means you're wiping the entire OS and installing the new version on a clean partition. Think of it as formatting a hard drive and installing an OS instead of just upgrading your existing OS.
You obviously lose all apps installed,and it would be like when you first turned on your phone, however as long as you don't wipe internal storage, all your photos,music,etc are not wiped so you can use apps like titanium backup to restore all apps and data .
This method is recommended when switching from different custom ROM's and when upgrading from major version updates, like for example, going to Android 8 from Andorid 7.
---------- Post added at 07:13 PM ---------- Previous post was at 07:09 PM ----------
rockuman_ex said:
Will the official TWRP work with no problem?
I'm already on 4.7.6, offical twrp-3.2.1-1-dumpling and magisk 15.3, and don't really want to flash another recovery.
Click to expand...
Click to collapse
I used that same version of TWRP back during the Oreo beta and it didn't work so I had to switch to blu_spark.

HueleSnaiL said:
Wiping data and system partition which means you're wiping the entire OS and installing the new version on a clean partition. Think of it as formatting a hard drive and installing an OS instead of just upgrading your existing OS.
You obviously lose all apps installed,and it would be like when you first turned on your phone, however as long as you don't wipe internal storage, all your photos,music,etc are not wiped so you can use apps like titanium backup to restore all apps and data .
This method is recommended when switching from different custom ROM's and when upgrading from major version updates, like for example, going to Android 8 from Andorid 7.
---------- Post added at 07:13 PM ---------- Previous post was at 07:09 PM ----------
I used that same version of TWRP back during the Oreo beta and it didn't work so I had to switch to blu_spark.
Click to expand...
Click to collapse
So i took the jump and flashed blu spark and the 5.0.3 full rom.
Yes i lost the recovery to stock, but that's ok. Just want to get OTA in the future and I don't need root at the moment.
So this is what i did (coming from 4.7.6, official twrp, magisk 15.3)
Make sure you have all the necessary files (eg. blu spark img file and the full ota file on your phone
boot the fastboot and "fastboot flash recovery twrp-3.2.1-x_blu_spark_v8.68-op5_op5t.img"
On the phone, choose and go to recovery
(now i'm on blu spark) Wipe Cache and Dalvik cache (i did this 2 times just to make sure)
Choose install and select the full ota rom file
Let it run and install the rom (took less than 5 mins)
Wipe Cache and Dalvik cache again (again, i wiped 2 times just to make sure)
Reboot
Make take a while (less than 10mins) for android to start and do the upgrade etc
Done
So far so good, i don't see any immediate problem. I will play a bit more and will post if I encounter any problem :good:

I have updated to 5.0.3 through system update app. where it downloaded full ota file and installed.Now I want to install twrp nd root my phone so pls confirm my steps
1 boot into fastboot mode and flash bluespark recovery
2 wipe delvik/cache from twrp recovery
3 flash magisk zip
4 again wipe delvik cache
5 reboot
are above steps correct?

Hello,
i have latest (8.69) twrp blue_spark and i try to flash latest oxygen os
1)Oreo 5.0.3: OnePlus5TOxygen_43_OTA_029_all_1802022353_460d.zip
2)magisk 15.3
3)wipe davlik/cache
reboot system and i get stucked at bootanimation of OxygenOS.
Any help guys please ?
Thanks!
Redownloaded Magisk 15.3 and ok

BrollyG4 said:
Hello,
i have latest (8.69) twrp blue_spark and i try to flash latest oxygen os
1)Oreo 5.0.3: OnePlus5TOxygen_43_OTA_029_all_1802022353_460d.zip
2)magisk 15.3
3)wipe davlik/cache
reboot system and i get stucked at bootanimation of OxygenOS.
Any help guys please ?
Thanks!
Redownloaded Magisk 15.3 and ok
Click to expand...
Click to collapse
I'm having the same problem, I think it's version (8.69) twrp blue_spark. I'll try with version 8.68

How to update to 5.1.5?

Hey. I'm downloading 5.1.5 and I'm going to be installing it on my phone. I am running an old twrp that's most probably codeworkx. But i want to shift to blu spark. Do i just install the recovery image from within twrp and then reboot recovery?
After that, when i want to install the rom. I just wipe dalvik, take a backup and dirty flash it? (I'm on stock rn without substratum) Or do i need to do something else? Anything to do for dm verity? Idk what it is honestly.

Rommco05 said:
Good question. I want to swich from Liquid remix (without treble) to OOS 5.1.5. Problem is this, I dont have access to PC. So Im thinking to try without PC.
1. Flash latest bluspark twrp
2. Flash OOS 5.1.4
3. Flash back before reboot latest bluuspark twrp
4. Format data
5. Boot in to OOS
6. Boot back to twrp and flash 5.1.5
7. Format data
3. ? Done ?
Can someone this confirm?
Click to expand...
Click to collapse
Why would you flash 5.1.4 first?

i installed it
Turns out if you want to jump from any version to 4.1.5, to need to install 4.1.4 first. don't know why though.
here are the steps:
1. Backup
2. Install 5.1.4
3. Install 5.1.5
4. Magisk
5. Reboot.

Bliss Rom Pie On Realme2pro

I tried bliss rom pie on realme2pro.Here is some screenshot link-
https://imgur.com/rBKNRQQ
https://imgur.com/Q7g68mR
https://imgur.com/bEKYvS8
https://imgur.com/nDkrhiH
https://imgur.com/mddj5yk
https://imgur.com/xfN23Yp
Anyone tried yet?please try and let me know is it suitable for our realme2pro or not.
bliss rom gsi pie arm64 a only
link- https://www.xda-developers.com/bliss-roms-android-pie-gsi-project-treble-release/

it booted fine

Is fp working in this and the gcam??

No brother,fp not working

I tried A only using TWRP (latest version), but it just hangs at the realme logo then reboots back to recovery.
Note: even though I flashed the img to the system partition it complained no OS was installed.
Prior to that I had done a factory wipe and then a system wipe.
https://forum.xda-developers.com/pr.../rom-blissroms-9-0-official-4-4-2019-t3918303
11.7 A-Only Build with Gapps built in
11.8 A-Only Build Stock (without Gapps)
Both versions failed!

Many a times brother due to vendoe problem this loop happens. When this loop happens try to boot to recovery and flash vendor.img and you will be able to boot to rom

Step For Flashing-
1.latest twrp or r2x2 recovery
2.then backup
3.wipe system,vendor.userdata,cache,delvik cache for clean install
4.flash vendor zip first link- https://androidfilehost.com/?fid=1395089523397931146
5.unpack sytem image flash to system link- https://androidfilehost.com/?fid=1395089523397933944
6.wipe cache and delvik cache
7.Swipe to reboot
8.wait for few minutes it booted to bliss rom
caution-
latest system color os a.17 build vendor not worked
flash only linked vendor zip from above
then you good to go
best of luck

galibalmasanick said:
Step For Flashing-
1.latest twrp or r2x2 recovery
2.then backup
3.wipe system,vendor.userdata,cache,delvik cache for clean install
4.flash vendor zip first link- https://androidfilehost.com/?fid=1395089523397931146
5.unpack sytem image flash to system link- https://androidfilehost.com/?fid=1395089523397933944
6.wipe cache and delvik cache
7.Swipe to reboot
8.wait for few minutes it booted to bliss rom
caution-
latest system color os a.17 build vendor not worked
flash only linked vendor zip from above
then you good to go
best of luck
Click to expand...
Click to collapse
The same problem persists. It loads the REALME logo, and immediately reboots into the Bootloader.

Is vendor.zip flashed using TWRP Install? Or does it have to be flashed to "boot"?

vendor only flashable from twrp recovery

batflashholmes said:
The same problem persists. It loads the REALME logo, and immediately reboots into the Bootloader.
Click to expand...
Click to collapse
whats the variants phone are you using?
4/64 or 128ufs
indian or others
are you flashing inside any mode?
just flash vendor zip & bliss img to system and reboot,wait some time

Got it to work after flashing vendor.img
Does this require a device specific kernel to already be installed from a previous ROM? When I checked the kernel in my Realme 2 Pro it was the same kernel as what is used by device specific ROMs: 4.4.78-perf+
Can I flash a different kernel from here?
https://github.com/BlissRoms-Kernels

i am not responsible for that,you may try but recommend-no,thanks a lot

galibalmasanick said:
whats the variants phone are you using?
4/64 or 128ufs
indian or others
are you flashing inside any mode?
just flash vendor zip & bliss img to system and reboot,wait some time
Click to expand...
Click to collapse
I use a 4/64 model. Indian itself.
I did not flash inside any mode (that I know of at least).
I ended up bricking my phone completely somehow. It would show the RealMe logo, and then boot up into a blank white screen with an input bar, and keyboard. But nothing else. It refused to boot into the bootloader as well, saying that there was some error.
Also, I had tried flashing the vendor zip first, and then the bliss img. Whenever I did that though, it would show "No OS installed. Do you want to continue?"

Thanks for trying it but this isn't working on your device & I am also sorry, plz try stable rom from xda or stock rom that can be best for you,best of luck ?

Develop Bugs

welcome