Has anybody tried mounting their tab in their car? I'd like to mount mine on the center console and use it for navigation and music, but I haven't found any mounting solutions for my ZJ that I like. I'm hoping maybe the Broddit Proclip for the 10.1 isn't too far away.
I've seen the ones that bolt to the floor, but I don't think I'm really interested in something like that. Plus, they are expensive.
Anyway, those of you that have done this - let us know what you worked out, and give us a few pictures if you'd be so kind. I'm keen to get my tab mounted in my Jeep as well!
I use this one...
A word of caution is that, compared to a phone or a GPS, the Tab is relatively heavy. It tends to vibrate some at the end of the clip. But if you just stick the mount into a cup holder in the center console of your car you should be fine.
Anybody seen anything new? Not many options thus far
I've been keeping my eye out... but still haven't seen much either.
The 10.1 is a fairly large device to mount to a dash with something like a ProClip. I used a proclip center vent mount for my Garmin and it was great, but I could not imagine the GT sitting there like that.
As awesome and cool as it would be to have the GT mounted nicely on the dash it would block too many things on the dash. The type of vehicle you have will also be a huge factor, maybe you have one of those larger popup drawers that some cars have, maybe the GT can somehow be mounted in that spot.
I'm working on making a custom mount for my car, that will drop the tab over my radio and will look stock.
I modeled the radio and dash in Solidworks and am fabricating the custom mounts later today. I'll post pictures of the process and make a thread later this week.
If you can get me the specs of the radio, I may be able to make you a mount as well.
Since there are no custom car mounts for the 10.1 Tab yet, I bought this car mount from Ebay to use for a 2000+ mile road trip I'm taking next week:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310333108738&ssPageName=STRK:MEWNX:IT#ht_2583wt_1037
While it is off course a plastic fantastic, non-custom car mount, I just tried it out in my Civic and found it to be quite decent actually. Very simple design and not too bulky at all, and seems fairly sturdy (of course, I wouldn't be surprised if it falls off the window at some point). I'll take some pictures later of it in action and post them in this thread.
For power, I used this dual USB car charger (one 2.1A and one 1A USB jacks to charge both my 10.1 Tab and my Evo 4G at the same time):
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=120693523948&ssPageName=STRK:MEWNX:IT
It won't charge the 10.1 Tab without this adapter though:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190522553195&ssPageName=STRK:MEWNX:IT#ht_3085wt_1037
All together, I have a fairly nice setup for my 10.1 Tab and Evo 4G (with wireless hotspot to my Tab) that will hopefully work well during my trip next week.
Sholland91 said:
I'm working on making a custom mount for my car, that will drop the tab over my radio and will look stock.
I modeled the radio and dash in Solidworks and am fabricating the custom mounts later today. I'll post pictures of the process and make a thread later this week.
If you can get me the specs of the radio, I may be able to make you a mount as well.
Click to expand...
Click to collapse
Cant wait to see the finished product!
su6oxone said:
Since there are no custom car mounts for the 10.1 Tab yet, I bought this car mount from Ebay to use for a 2000+ mile road trip I'm taking next week:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310333108738&ssPageName=STRK:MEWNX:IT#ht_2583wt_1037
While it is off course a plastic fantastic, non-custom car mount, I just tried it out in my Civic and found it to be quite decent actually. Very simple design and not too bulky at all, and seems fairly sturdy (of course, I wouldn't be surprised if it falls off the window at some point). I'll take some pictures later of it in action and post them in this thread.
For power, I used this dual USB car charger (one 2.1A and one 1A USB jacks to charge both my 10.1 Tab and my Evo 4G at the same time):
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=120693523948&ssPageName=STRK:MEWNX:IT
It won't charge the 10.1 Tab without this adapter though:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190522553195&ssPageName=STRK:MEWNX:IT#ht_3085wt_1037
All together, I have a fairly nice setup for my 10.1 Tab and Evo 4G (with wireless hotspot to my Tab) that will hopefully work well during my trip next week.
Click to expand...
Click to collapse
Will that mount stick to the dash or glass only?
Sholland91 said:
I'm working on making a custom mount for my car, that will drop the tab over my radio and will look stock.
I modeled the radio and dash in Solidworks and am fabricating the custom mounts later today. I'll post pictures of the process and make a thread later this week.
If you can get me the specs of the radio, I may be able to make you a mount as well.
Click to expand...
Click to collapse
I'd like something like this. I don't want to mount my tab in the windshield or on the dash, it's way too big for that imho. But there is PLENTY of room on the center console of my Jeep to hold the tab. It has a 1.5 DIN mount there, so I've been wondering if I could figure something out with that extra half DIN that I had available.
As far as Broddit Proclips go, then already have mounts for the iPad and Xoom, so I don't think it would be much of an issue for the Galaxy Tab 101.1.
Any advice for a good mount for a convertible?
When i drove a Hummer, I would just put my netbook up on the dash and it never moved. Now that I've gone to retro thunderbird, I'm worried that due to the wind factor, it will fly out when I'm on the freeway. The cup holders are a bit back..... so something with a long stem on it might be ideal.
This is what the interiors look like.
njfoses said:
Will that mount stick to the dash or glass only?
Click to expand...
Click to collapse
I only tried it with glass since it didn't come with a plastic sticker circle, but I'm not sure it would be able to support the 10.1's weight from the dash.
anyone tried this mount yet? add the "HTTP.WWW"
mountguys.com/product_p/mfx-88-ipadtab.htm i still can't post links
If you have a folio type case you can use my "ultimate $2 car mounting solution" All you need is a 6' bungee cord, available at any Walmart/Target/hardware store for $2 or less. Guide the hooks from each end of the cord into vents on your dash, fold the flap of the case backwords and slide it between the cord and the dash. Presto! Not the prettiest set up, but dirt-cheap and actually works very well.
That looks great exactly what i was looking for. Please post pics when completed, would love to have one made for my car.
Sholland91 said:
I'm working on making a custom mount for my car, that will dwrop the tab over my radio and will look stock.
I modeled the radio and dash in Solidworks and am fabricating the custom mounts later today. I'll post pictures of the process and make a thread later this week.
If you can get me the specs of the radio, I may be able to make you a mount as well.
Click to expand...
Click to collapse
I'm using a Ram Mount for a Motorola Xoom as shown here:
http://www.ram-mount.com/NewProducts/motorolaxoommount/tabid/3871/Default.aspx
Fits fine, though I needed to file out the side of the mount slightly to fit the 3.5mm headphone jack in. Nothing 5 minutes with a round file couldn't handle.
Ram have a variety of ways to mount this to your car - I'm using this one:
http://www.ram-mount.com/CatalogRes...45051049054045049045050051056085/Default.aspx
Because I need a nice solid setup for my 4x4.
I got a PadHoldr mount that has spacers to make it work with any tablet (Xoom, Galaxy, iPAd, whatever) and so far I really like it. It bolts underneath your dash and has an arm tha comes out. It covers up my radio controls so I could care less about that. Had this in there for months now going strong, has a foam pad on the back so it doesn't wobble around. Use this for Pandora/music videos/Google nav/Torque/everything. Highly recommended!!
I have a 2011 vw jetta sportwagen tdi, and I don't know where to mount my phone in there. I've seen videos of people driving with the phone mounted so they can record the drive, and I want to do that too, but with the official mount it's difficult for me to find a good place for it. I think the way it's mounted in the picture below is illegal, so I probably won't do that. But I posted the pictures so you might be able to suggest where to put it. I'm trying not to use the sticky pad thing, but if it comes to that then so be it. If you could suggest a different mount that might work better for my car that would be awesome.
vzw galaxy nexus.
Also, I'd like a mount that might work with an extended battery... Not those huge ones though. Thanks!
Sent from my Galaxy Nexus using xda premium
Same issue
I have a 2010 VW Jetta and am looking to find a good spot also. I don't want a cup holder. ProClip in expensive. Windshield won't work either.
Could anyone with the car dock let me know how easily it is (or appears to be - I'm not asking you to do this!) to remove the mount (the part with the suction cup) from the back of the dock itself? I've a custom plate/adjustable mount in my car, and I want to mate the dock part of the Samsung mount to this. Previously I've managed this on other mounts by simply countersinking a screw in the center of the dock and screwing it to the vehicle mount.
Thanks!
I have searched and searched for several phones for a car mount that I can set my phone into, as in drop it in vertically so at least the bottom third is supported and it is held at a good (adjustable) viewing angle, the Brodit mounts look good but are badly advertised as to whether the allow for cases or not.
Now there is a new complication, a mount that accepts a wireless QI pad and a phone (Nexus 5) in a case - does anyone know of such a device or solution?
Thanks
Hi All,
I'm looking for a mount for my car, preferably without the window sucker...I hate those!! A mount for the dash would be ideal? Any suggestions will be greatly appreciated.
I have a Mountek, it utilized the cd player's slot. If you use your cd player a lot, it might not be the mount for you.(does not interfere with the playing of the cd itself).
☞ Sent from here☜
I agree with the above. I've been using this one for about 2 years and love it!
Amazon Link
http://www.ibolt.co/ibxs-33603
It does use a suction cup but it comes with a disc which you can mount to your dash and then attach the mount to. Great features and app. Love mine!
Thanks for the suggestions but I haven't got a CD player in my car, its a new media system car. Do you have the link to the Mountek website as I wanna check it out anyway incase they have any more mounts? I just came across a mount called the breffo spiderpodium which looks pretty creepy but awesome at the same time. Deciding whether to give it a go, some good reviews around the web.
scoot77 said:
Hi All,
I'm looking for a mount for my car, preferably without the window sucker...I hate those!! A mount for the dash would be ideal? Any suggestions will be greatly appreciated.
Click to expand...
Click to collapse
I use the Tetrax X-way mount. You attach a small metal button to the back of your phone/case and then you attach the holder to you dash vents.
http://www.amazon.com/Tetrax-72016-Smartphone-Magnetic-Airvent/dp/B0030IMXHM
Rob