Related
I've just had my active cradle and brodit pro clip delivered... didn't realise that it was a permanent fixing system...I have also ordered a universal suction mount from mobilefun as I often need to use TomTom in other cars... with the proclip system you have to screw the cradle onto the proclip...
There must be a system that lets me move the cradle between cars easily??
Thanks!
http://www.brodit.se/images/968649.jpg
Brodit Art.nr. 968649
That is what I already have - I need a female adaptor to fix onto the Brodit proclip that means I don't need to permanently fix the active cradle to it...
I Dont get it?
If you orderd a suction mount, and you screw your holder on to this, and your Brodit holder is for the Zig plugg........then it dossent get any easier to switch between cars???
Check this web-site, they have all you need to know about with sample photos:
Brodit ProClip
and for your TomTom:
TomTom Mount
Here's a review of the Droid 2 AC Vent Car Mount:
http://droid2accessories.com/droid-2-accessories/droid-2-car-mount-review/
Works fine!
i like it...but see..the only problem i see is the little leg below...i own a 240...and unlike ur SUV...it desnt have a section that stick out below the AC center vents...its all flush
pic for reference...not my car
http://www.superstreetonline.com/featuredvehicles/130_0604_1989_nissan_240sx/photo_12.html
sigh...
Proclip is what you want. proclipusa dot com.
Get the car specific base mount for your ride, and then pick up either a "ball" mount (i.e. ball and socket - Garmin Nuvi 660 piece will work), or look at the "dual prong T" mounting clip with tilt-swivel. This should fit into the back of the OEM car mount (just slide this in instead of the supplied bits). I haven't tested the dual-prong T thing, but it looks like it should work.
I have tested the ball and socket method and it does work, although it's not quite as snug as I'd like. Proclip's swivel adapters are a lot more secure / stiffer.
Especially with the D2, where the mount is way more elaborate. The original D1 mount worked better with the ball & socket setup since it was lighter.
i found this one during my search
http://cgi.ebay.com/ws/eBayISAPI.dl...&_trkparms=algo=LVI&its=I&otn=2#ht_2177wt_911
its looks to be D2 specific...so ill post up some pics once i get it
I've been using Pro-Clip for years (ATT 8525, Tilt, Fuze, VZW TP2), so I've got the vehicle mount already.
I picked up the OEM D2 mount, but was still scratching my head on how to mount it to the Proclip vehicle mount (I HATE suction cups on the windshield). So, I just ordered the two-prong T plate
http://www.proclipusa.com/store/pro...)-mounting-plate-with-tilt-swivel-215199.aspx
Looks like it should work great - will see in a few days when the order arrives.
Finally got the two-prong plate for the proclip mount and put it on last night. The OEM car mount cradle fits it like a glove, and I've got the ability to adjust for angle too! Definitely a great way to go (although not cheap when I add up all the individual components).
Now to figure out just which apk's to rename to disable that ghey "Cardock" app - the media player it links is TERRIBLE!
I know this is an old thread, but I got a Proclip and love it. Just wanted to say thanks for the lea.
So I have the official car dock:
http://www.samsung.com/us/mobile/cell-phones-accessories/ECS-K1D9BEGSTA
And love the functionality of not having to plug in power or audio out all the time.
My only issue is that I want to be able to extend the arm length as it doesn't fit any where great in my car.
Has anyone seen a vent mount or extending arm accessory that is compatible with the official holster?
Thanks in advance for any help or suggestions. I'm sure I could get creative with a solution but didn't want to reinvent the wheel if there is something out there already.
Nice! Is that mount horizontal only, or can it rotate to hold the phone upright too?
Bazirker said:
Nice! Is that mount horizontal only, or can it rotate to hold the phone upright too?
Click to expand...
Click to collapse
It can fully rotate 360 degrees and pivot in any direction. The holster is attached to the arm via a ball and socket connection so you have virtually unlimited options of angle etc... and then you just turn a knob to 'lock in' the position you like. I definitely worship the dock, just need a longer arm : (
OK one other question....if you have a case on your phone, do you have to take it off to use the dock? It looks like you would.
I searched around to try and find a longer arm, and no luck
Bazirker said:
OK one other question....if you have a case on your phone, do you have to take it off to use the dock? It looks like you would.
I searched around to try and find a longer arm, and no luck
Click to expand...
Click to collapse
Thanks for trying to help.
You definitely can't use a case.
The fit is meant to be 'perfect' so it's easy to lock in your phone with the microusb plug so power and audio work.
I love it!!! but no case would work.
Unless you can find a way to mount the flat circle to a longer arm and suction to that there isn't a viable arm extension. I have looked also. My maxima gives a long reach to the dock to where I like the mount to sit.
I bought the infuse dock but instead of using the arm that came with it I bought a proclip center console mount for my car. Looks nice and works great although it was expensive. Attached the infuse dock to proclip car mount and a proclip swivel mount.
I have the Infuse mount which I'm guessing has the same design as yours. Anyway, I found that the vent clip mount that I've been using for my Galaxy Tab mates perfectly to the Infuse mount. I can't be positive but this looks like the same vent mechanism.
Looks like I'm not allowed to post links so search for "Black Car Air Vent Holder With Clip For Nokia " on ebay and you should find it for $3.34.
Sorry to be off topic, but does the car dock have a cut out for the camera lens? I'm not sure from the pic.
Subiegsr said:
Sorry to be off topic, but does the car dock have a cut out for the camera lens? I'm not sure from the pic.
Click to expand...
Click to collapse
yep it does. So does the infuse dock. Its on the right hand side of the pic
Mikest1978 said:
yep it does. So does the infuse dock. Its on the right hand side of the pic
Click to expand...
Click to collapse
Awesome thanks! Might have to pick this up then!
so, i have a meta question about this dock. it looks pretty cool, and it *might* work to put it vertically in the space in the center console of my '98 honda accord, hopefully putting it right at my fingertips. that part's a crap shoot however. what i don't understand though is the audio out jack. how the heck does that work?? the audio jack on the phone is at the top, but the audio jack on the dock is on the bottom next to the usb plug. i just don't get how they route the audio out there. this might be a stupid question.
anastrophe said:
so, i have a meta question about this dock. it looks pretty cool, and it *might* work to put it vertically in the space in the center console of my '98 honda accord, hopefully putting it right at my fingertips. that part's a crap shoot however. what i don't understand though is the audio out jack. how the heck does that work?? the audio jack on the phone is at the top, but the audio jack on the dock is on the bottom next to the usb plug. i just don't get how they route the audio out there. this might be a stupid question.
Click to expand...
Click to collapse
The phone only needs to be plugged into the microusb port on the dock for both power and audio to be piped through. The actual headset jack on the phone is not used. So phone goes into dock (just microusb port) then the audio out on the dock will work.
tahlsr said:
The phone only needs to be plugged into the microusb port on the dock for both power and audio to be piped through. The actual headset jack on the phone is not used. So phone goes into dock (just microusb port) then the audio out on the dock will work.
Click to expand...
Click to collapse
The desk dock works the same way. Only USB plugs into the phone, but the audio jack on the back of the dock does route the sound to external speakers.
This dock and mount is way better than that one. Plus ball locking might fit yours.
https://www.gpscity.com/ram-mount-universal-top-clamping-hook-cradle.html
https://www.gpscity.com/ram-mount-cradle-plate-suction-mount-lite-rap-b-166-2u.html
Wow.. I'm glad you posted.. I just started to search to see if audio via the usb was possible and wasn't finding anything. Couple of questions..is there a usb/line out volume adjustment or is it fixed? Also.. I already have a micro usb hard wired in my car.. is it a micro usb on the end of the cigarette lighter adapter? Also are these available at any local stores.. just hoping I could pick one up instead of ordering.. I checked the local Sprint store and they just have the universal mount kits. thanks for any info!
tri0xinn said:
Wow.. I'm glad you posted.. I just started to search to see if audio via the usb was possible and wasn't finding anything. Couple of questions..is there a usb/line out volume adjustment or is it fixed? Also.. I already have a micro usb hard wired in my car.. is it a micro usb on the end of the cigarette lighter adapter? Also are these available at any local stores.. just hoping I could pick one up instead of ordering.. I checked the local Sprint store and they just have the universal mount kits. thanks for any info!
Click to expand...
Click to collapse
the dock that's specifically for the E4G includes a cig lighter power adapter, but the infuse version does not. i have power going to the infuse from cig lighter, then a standard audio cable going from the back of the dock to my car radio. works well. the volume level adjustment has to be done in software. i'm currently evaluating CarHome Ultra, which has configurations so that when you put the phone in the dock, it sets media volume to whatever you desire, then when you remove the phone from the dock, it reverts back to what it was.
---------- Post added at 11:03 AM ---------- Previous post was at 11:00 AM ----------
one thing that kind of baffles me with the dock - when my phones in the dock, if i try to speak commands to it, it seems it can't hear me. the phone's microphone is covered by the adapter block you slide in to lock the phone and make usb connection. i have the infuse dock, but it looks identical to the E4G-specific dock.
does anyone else have trouble speaking commands when docked? it's frustrating, it makes it much less of a hands-free experience than what i was hoping for!
yang704 said:
This dock and mount is way better than that one. Plus ball locking might fit yours.
https://www.gpscity.com/ram-mount-universal-top-clamping-hook-cradle.html
https://www.gpscity.com/ram-mount-cradle-plate-suction-mount-lite-rap-b-166-2u.html
Click to expand...
Click to collapse
How easy is it to snap the phone on there? I have a solution and an Idea I'd like to use and was looking for a dock that the back will screw into a mount I have, this looks perfect but I really want ease of snapping on/off.
tahlsr said:
So I have the official car dock:
http://www.samsung.com/us/mobile/cell-phones-accessories/ECS-K1D9BEGSTA
And love the functionality of not having to plug in power or audio out all the time.
My only issue is that I want to be able to extend the arm length as it doesn't fit any where great in my car.
Has anyone seen a vent mount or extending arm accessory that is compatible with the official holster?
Thanks in advance for any help or suggestions. I'm sure I could get creative with a solution but didn't want to reinvent the wheel if there is something out there already.
Click to expand...
Click to collapse
I ended up modding mine to fit the ProClip car mount I already had. Pics are in the original deal thread if you are interested.
Sent from my SPH-D710 using xda premium
Seems like most people use some form of case (thicker than the zagg)
Does anyone know of a dock like this samsung dock but able to fit a phone with a case? Alternatives (docks that work with a case) dont seem to connect automatically to the micro usb. Just wondering if anyone knows of something that will do both? Shouldn't this exist? am I way off?
I have a drop low car that if you go through train track it will bump you off your seat. So I need a car mount that will have the least vibration. Here are two I found on ebay. If any of you have purchase one or other please give a brief description of your experience.
1: http://www.ebay.com/itm/Samsung-GUN...070739?pt=PDA_Accessories&hash=item3379e03c53
2: http://www.ebay.com/itm/New-OEM-Sam...163139?pt=PDA_Accessories&hash=item2a20d08603
ProClip. They have the most solid mount system I have ever used.
Sent from my SPH-L710
I pre-ordered two of these: iBolt Galaxy S III Charging Dock
For a completely vibration free driving experience the ROK Solid mount is included, featuring a strong 70 mm suction cup. Attach to windshield, or use the included disc to place on dashboard. A ball-joint connector system allows the driver to adjust to almost any viewing angle. The female ball connector is an “industry standard” 17 mm size, allowing any dash, vent or bike mount designed for Garmin to work with the cradle as an alternative to the suction mount.
Click to expand...
Click to collapse
+1 for ProClip. I find mine rock solid, and it is better located in my car than a suction cup or CD mount would be. The big con is that it's likely the most expensive mount on the market. Still, I'm glad I went with it.
I'm going to be going with the ProClip once I get my phone for both myself and my fiancee. It looks like it's great and will fit both of our cars. I still have my old suction cup mount that I've been using for a couple years now that I think would work well enough when I want to do dashcam stuff.
I just received my ProClip mount last week and it is quality as usual. I've had them for at least five different devices, so I knew what to expect. I got the one that is wired for power, very convenient.
Does the proclip offer a landscape mounting option?
I have just bought the Samsung car dock. While some may say its not a well built as say the proclip ones. My logic is, should the dock fail, i can at least say Samsung it was your dock that failed. The samsung dock seems very good tho and has performed well on the bad roads i have near me.
I got a universal mount from DX (SKU 81246 if the link does not work). It works well and was inexpensive. That being said, I had the Samsung mount for my Fascinate which would put the phone into car mount mode when you plugged it into the micro-USB which IMHO is superior to any of the universal mounts in many ways. Anybody know if Samsung will be releasing a mount like this for the S3?
CZ Eddie said:
Does the proclip offer a landscape mounting option?
Click to expand...
Click to collapse
I have the powered ProClip dock that plugs into the socket on my dash (not the one you have to wire in). Mine holds my phone tightly enough to use in landscape, and that is how I keep it. I slide the phone in and out from the right side, and it works great.
I am using the iOttie mount and it is perfect. Easy to setup and move if needed and the phone sits securely inside. You can do landscape or portrait mode for your phone.
Not a powered solution however.
http://www.amazon.com/gp/product/B007FHX9OK/ref=oh_details_o02_s00_i00
19.99 (and Prime) here at Amazon.
I'm working on a rear view mirror mount for the SGS3 (and others)
works great and keeps the phone out of driving view while keeping it where the eyes can see it.
I will post pictures later for anyone interested.
CZ Eddie said:
Does the proclip offer a landscape mounting option?
Click to expand...
Click to collapse
It is a tilt/swivel mount so you can have it either landscape or portrait. I keep mine in portrait but I have tried it landscape and it was still very solid.
iBOLT dock with car mode & integrated 9 ft cable...
Our iBOLT Dock (www.ibolt.co/ibpf-33307) works the same way as the old S2 car dock. It puts the phone into car mode (sVoice) but you can download the CarHome Ultra and this application will install itself as the default app opening when inserted into the Dock if you want. With CarHome you can drag and drop apps, short numbers or just about anything to your car home screen.
The dock also comes with a 9ft (yes, 2.7 meters!) long charging/aux-out cable. This allows you to place the Car Dock on the left side of the steering wheel and tuck the cable down the drivers door, under the carpet and up to the center console for USB charging and 3.5 aux-in. The home screen also turn horizontal. Look the video and see if this is an option... Feel free to contact us and ask questions.
I recently acquired a Pantech Burst that I plan to use as a GPS on my family vacation to Costa Rica. I had thought that I'd be able to use my universal car mount, but unfortunately the Burst has it's USB connector right on the middle side of the phone and the arms on the mount I have would interfere with my ability to charge the phone while in the mount. I've attached a couple of pictures with this post.
Does anybody know of a mount that might work with this phone?
Thanks!
Kensington's universal mount may work. I can plug in my incredible S while it's mounted, though I'd need to go measure the exact position of the side holes to see if it would work with the Burst's positioning.