Develop Bugs

[Q] Universal Car Windshield Swivel Mount Dock ??

Hi,
I'm looking for Universal Car Windshield Swivel Mount Dock , and had several types during the last few years. most of them were not good, cause they swing/dance all the times when I was driving, and I'm looking for a new one, a stable one.
needless to say that if you know about a good one which comes with micro-usb Charger or even FM transmitter...this is my dream
Your suggestion?
Thanks,
Tomer

Any good car mounts yet?

Has anybody tried mounting their tab in their car? I'd like to mount mine on the center console and use it for navigation and music, but I haven't found any mounting solutions for my ZJ that I like. I'm hoping maybe the Broddit Proclip for the 10.1 isn't too far away.
I've seen the ones that bolt to the floor, but I don't think I'm really interested in something like that. Plus, they are expensive.
Anyway, those of you that have done this - let us know what you worked out, and give us a few pictures if you'd be so kind. I'm keen to get my tab mounted in my Jeep as well!

I use this one...
A word of caution is that, compared to a phone or a GPS, the Tab is relatively heavy. It tends to vibrate some at the end of the clip. But if you just stick the mount into a cup holder in the center console of your car you should be fine.

Anybody seen anything new? Not many options thus far

I've been keeping my eye out... but still haven't seen much either.

The 10.1 is a fairly large device to mount to a dash with something like a ProClip. I used a proclip center vent mount for my Garmin and it was great, but I could not imagine the GT sitting there like that.
As awesome and cool as it would be to have the GT mounted nicely on the dash it would block too many things on the dash. The type of vehicle you have will also be a huge factor, maybe you have one of those larger popup drawers that some cars have, maybe the GT can somehow be mounted in that spot.

I'm working on making a custom mount for my car, that will drop the tab over my radio and will look stock.
I modeled the radio and dash in Solidworks and am fabricating the custom mounts later today. I'll post pictures of the process and make a thread later this week.
If you can get me the specs of the radio, I may be able to make you a mount as well.

Since there are no custom car mounts for the 10.1 Tab yet, I bought this car mount from Ebay to use for a 2000+ mile road trip I'm taking next week:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310333108738&ssPageName=STRK:MEWNX:IT#ht_2583wt_1037
While it is off course a plastic fantastic, non-custom car mount, I just tried it out in my Civic and found it to be quite decent actually. Very simple design and not too bulky at all, and seems fairly sturdy (of course, I wouldn't be surprised if it falls off the window at some point). I'll take some pictures later of it in action and post them in this thread.
For power, I used this dual USB car charger (one 2.1A and one 1A USB jacks to charge both my 10.1 Tab and my Evo 4G at the same time):
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=120693523948&ssPageName=STRK:MEWNX:IT
It won't charge the 10.1 Tab without this adapter though:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190522553195&ssPageName=STRK:MEWNX:IT#ht_3085wt_1037
All together, I have a fairly nice setup for my 10.1 Tab and Evo 4G (with wireless hotspot to my Tab) that will hopefully work well during my trip next week.

Sholland91 said:
I'm working on making a custom mount for my car, that will drop the tab over my radio and will look stock.
I modeled the radio and dash in Solidworks and am fabricating the custom mounts later today. I'll post pictures of the process and make a thread later this week.
If you can get me the specs of the radio, I may be able to make you a mount as well.
Click to expand...
Click to collapse
Cant wait to see the finished product!

su6oxone said:
Since there are no custom car mounts for the 10.1 Tab yet, I bought this car mount from Ebay to use for a 2000+ mile road trip I'm taking next week:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310333108738&ssPageName=STRK:MEWNX:IT#ht_2583wt_1037
While it is off course a plastic fantastic, non-custom car mount, I just tried it out in my Civic and found it to be quite decent actually. Very simple design and not too bulky at all, and seems fairly sturdy (of course, I wouldn't be surprised if it falls off the window at some point). I'll take some pictures later of it in action and post them in this thread.
For power, I used this dual USB car charger (one 2.1A and one 1A USB jacks to charge both my 10.1 Tab and my Evo 4G at the same time):
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=120693523948&ssPageName=STRK:MEWNX:IT
It won't charge the 10.1 Tab without this adapter though:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190522553195&ssPageName=STRK:MEWNX:IT#ht_3085wt_1037
All together, I have a fairly nice setup for my 10.1 Tab and Evo 4G (with wireless hotspot to my Tab) that will hopefully work well during my trip next week.
Click to expand...
Click to collapse
Will that mount stick to the dash or glass only?

Sholland91 said:
I'm working on making a custom mount for my car, that will drop the tab over my radio and will look stock.
I modeled the radio and dash in Solidworks and am fabricating the custom mounts later today. I'll post pictures of the process and make a thread later this week.
If you can get me the specs of the radio, I may be able to make you a mount as well.
Click to expand...
Click to collapse
I'd like something like this. I don't want to mount my tab in the windshield or on the dash, it's way too big for that imho. But there is PLENTY of room on the center console of my Jeep to hold the tab. It has a 1.5 DIN mount there, so I've been wondering if I could figure something out with that extra half DIN that I had available.
As far as Broddit Proclips go, then already have mounts for the iPad and Xoom, so I don't think it would be much of an issue for the Galaxy Tab 101.1.

Any advice for a good mount for a convertible?
When i drove a Hummer, I would just put my netbook up on the dash and it never moved. Now that I've gone to retro thunderbird, I'm worried that due to the wind factor, it will fly out when I'm on the freeway. The cup holders are a bit back..... so something with a long stem on it might be ideal.
This is what the interiors look like.

njfoses said:
Will that mount stick to the dash or glass only?
Click to expand...
Click to collapse
I only tried it with glass since it didn't come with a plastic sticker circle, but I'm not sure it would be able to support the 10.1's weight from the dash.

anyone tried this mount yet? add the "HTTP.WWW"
mountguys.com/product_p/mfx-88-ipadtab.htm i still can't post links

If you have a folio type case you can use my "ultimate $2 car mounting solution" All you need is a 6' bungee cord, available at any Walmart/Target/hardware store for $2 or less. Guide the hooks from each end of the cord into vents on your dash, fold the flap of the case backwords and slide it between the cord and the dash. Presto! Not the prettiest set up, but dirt-cheap and actually works very well.

That looks great exactly what i was looking for. Please post pics when completed, would love to have one made for my car.
Sholland91 said:
I'm working on making a custom mount for my car, that will dwrop the tab over my radio and will look stock.
I modeled the radio and dash in Solidworks and am fabricating the custom mounts later today. I'll post pictures of the process and make a thread later this week.
If you can get me the specs of the radio, I may be able to make you a mount as well.
Click to expand...
Click to collapse

I'm using a Ram Mount for a Motorola Xoom as shown here:
http://www.ram-mount.com/NewProducts/motorolaxoommount/tabid/3871/Default.aspx
Fits fine, though I needed to file out the side of the mount slightly to fit the 3.5mm headphone jack in. Nothing 5 minutes with a round file couldn't handle.
Ram have a variety of ways to mount this to your car - I'm using this one:
http://www.ram-mount.com/CatalogRes...45051049054045049045050051056085/Default.aspx
Because I need a nice solid setup for my 4x4.

I got a PadHoldr mount that has spacers to make it work with any tablet (Xoom, Galaxy, iPAd, whatever) and so far I really like it. It bolts underneath your dash and has an arm tha comes out. It covers up my radio controls so I could care less about that. Had this in there for months now going strong, has a foam pad on the back so it doesn't wobble around. Use this for Pandora/music videos/Google nav/Torque/everything. Highly recommended!!

Which car mount should I get?

I have a drop low car that if you go through train track it will bump you off your seat. So I need a car mount that will have the least vibration. Here are two I found on ebay. If any of you have purchase one or other please give a brief description of your experience.
1: http://www.ebay.com/itm/Samsung-GUN...070739?pt=PDA_Accessories&hash=item3379e03c53
2: http://www.ebay.com/itm/New-OEM-Sam...163139?pt=PDA_Accessories&hash=item2a20d08603

ProClip. They have the most solid mount system I have ever used.
Sent from my SPH-L710

I pre-ordered two of these: iBolt Galaxy S III Charging Dock
For a completely vibration free driving experience the ROK Solid mount is included, featuring a strong 70 mm suction cup. Attach to windshield, or use the included disc to place on dashboard. A ball-joint connector system allows the driver to adjust to almost any viewing angle. The female ball connector is an “industry standard” 17 mm size, allowing any dash, vent or bike mount designed for Garmin to work with the cradle as an alternative to the suction mount.
Click to expand...
Click to collapse

+1 for ProClip. I find mine rock solid, and it is better located in my car than a suction cup or CD mount would be. The big con is that it's likely the most expensive mount on the market. Still, I'm glad I went with it.

I'm going to be going with the ProClip once I get my phone for both myself and my fiancee. It looks like it's great and will fit both of our cars. I still have my old suction cup mount that I've been using for a couple years now that I think would work well enough when I want to do dashcam stuff.

I just received my ProClip mount last week and it is quality as usual. I've had them for at least five different devices, so I knew what to expect. I got the one that is wired for power, very convenient.

Does the proclip offer a landscape mounting option?

I have just bought the Samsung car dock. While some may say its not a well built as say the proclip ones. My logic is, should the dock fail, i can at least say Samsung it was your dock that failed. The samsung dock seems very good tho and has performed well on the bad roads i have near me.

I got a universal mount from DX (SKU 81246 if the link does not work). It works well and was inexpensive. That being said, I had the Samsung mount for my Fascinate which would put the phone into car mount mode when you plugged it into the micro-USB which IMHO is superior to any of the universal mounts in many ways. Anybody know if Samsung will be releasing a mount like this for the S3?

CZ Eddie said:
Does the proclip offer a landscape mounting option?
Click to expand...
Click to collapse
I have the powered ProClip dock that plugs into the socket on my dash (not the one you have to wire in). Mine holds my phone tightly enough to use in landscape, and that is how I keep it. I slide the phone in and out from the right side, and it works great.

I am using the iOttie mount and it is perfect. Easy to setup and move if needed and the phone sits securely inside. You can do landscape or portrait mode for your phone.
Not a powered solution however.
http://www.amazon.com/gp/product/B007FHX9OK/ref=oh_details_o02_s00_i00
19.99 (and Prime) here at Amazon.

I'm working on a rear view mirror mount for the SGS3 (and others)
works great and keeps the phone out of driving view while keeping it where the eyes can see it.
I will post pictures later for anyone interested.

CZ Eddie said:
Does the proclip offer a landscape mounting option?
Click to expand...
Click to collapse
It is a tilt/swivel mount so you can have it either landscape or portrait. I keep mine in portrait but I have tried it landscape and it was still very solid.

iBOLT dock with car mode & integrated 9 ft cable...
Our iBOLT Dock (www.ibolt.co/ibpf-33307) works the same way as the old S2 car dock. It puts the phone into car mode (sVoice) but you can download the CarHome Ultra and this application will install itself as the default app opening when inserted into the Dock if you want. With CarHome you can drag and drop apps, short numbers or just about anything to your car home screen.
The dock also comes with a 9ft (yes, 2.7 meters!) long charging/aux-out cable. This allows you to place the Car Dock on the left side of the steering wheel and tuck the cable down the drivers door, under the carpet and up to the center console for USB charging and 3.5 aux-in. The home screen also turn horizontal. Look the video and see if this is an option... Feel free to contact us and ask questions.

Anybody try the ebay car mounts?

Was curious if anybody has tried the cheap car mounts on ebay. I can't post links but they are model specific and around $6. There is one for the Inc2 and a slightly different one for the IncS.
If you wanted to search for them on ebay the titles are:
FOR HTC Droid Incredible 2 CAR MOUNT CRADLE HOLDER dock
Car Mount Holder Cradle For HTC Incredible S G11
I've been thinking about getting one to see if it is total garbage or not and thought maybe somebody else has already done that.

Dermen said:
Was curious if anybody has tried the cheap car mounts on ebay. I can't post links but they are model specific and around $6. There is one for the Inc2 and a slightly different one for the IncS.
Click to expand...
Click to collapse
It should work just fine if you are not using a protective case on your DI2 - however, I do not like using these windshield mount, like GPS mount, as it's an open invitation for someone to break car windows looking for something of value in a grab & run.
I got something similar but a generic one with A/C vent mounting - horizontal style for a few dollars off eBay, great when using Google Map/Nav. on the go - the old Garmin has long retired even w. 2 updates.

Letitride said:
It should work just fine if you are not using a protective case on your DI2 - however, I do not like using these windshield mount, like GPS mount, as it's an open invitation for someone to break car windows looking for something of value in a grab & run.
I got something similar but a generic one with A/C vent mounting - horizontal style for a few dollars off eBay, great when using Google Map/Nav. on the go - the old Garmin has long retired even w. 2 updates.
Click to expand...
Click to collapse
I would throw the mount in the glove box when not in use. Was thinking about trying one of those bean bag things that just sit on the dash. Seems a lot easier than trying to undo the suction cup or the vent mount all the time.

Cooling phone with car/vehicle vent mounting options?

I have a 2017 Chevrolet Cruze Premier Hatchback, and use the iOttie Easy One Touch Qi Wireless Fast Charge Car Mount. I'm wondering if it's possible to mount my phone either on or in front of one of the AC/Heat vents. Living in Texas during the summer (which is pretty much 10-11 months out of the year), phones have a tendency to overheat when using a dashboard or windshield mount when wireless charging.
The vents are vertical, so vent clip based ones that go directly onto the vent seem to have the disadvantage of being able to move freely from left to right due to the additional weight especially when turning. I recently tried this one and it didn't work out too well.
I've checked out a few places that were suggested to me which included Panavise and Proclip, but they didn't help. The Panavise initially looked okay but its for a 2015. Upon contacting them to see if it would work, they said the 2017 was too different. Proclip has one, but it says for sedan only. Ideally I would like to be able to still use the iOttie with a mount that has AMPS mounting/holes. CD mount isn't option as the car is not equipped with one. Thoughts?

If your CD player is a little bit below your AC vents, you could use a CD mount. I have a 2007 Ford Freestyle and this setup works great for me. BTW, I'm in Irving, TX.

JimSmith94 said:
If your CD player is a little bit below your AC vents, you could use a CD mount. I have a 2007 Ford Freestyle and this setup works great for me. BTW, I'm in Irving, TX.
Click to expand...
Click to collapse
Unfortunately, my car is not equipped with a CD player...