Develop Bugs

[S-OFF][Flash recovery] Easy to flash recovery on computer

First of all , plz forgive my bad English ,I've tried my best~!
Thanks for emveefr and his quote :http://forum.xda-developers.com/showthread.php?t=1301388
If you can understand Chinese ,here is my post firstly on a Chinese forum ：http://bbs.hiapk.com/thread-2629638-1-1.html
This quote will let you flash your recovery easily through a computer,what you need to do is just a few steps below:
Above all ,make sure your wildfire s is S-OFF.
1. Download HTC Sync USB drivers through internet ,you can find it in the website of HTC.
2. Download "flash_recovery.zip" in the end of this quote, and extract it to you desktop (anywhere is OK),
3. make sure you user data space have more than 10 Mb available (to make sure,you may need uninstall some applications in you phone).
4. connect you phone to the computer with USB data cable,and chose HTC Sync mode.
In the end ,you just need to click "RunMe" in the folder that you extracted, then wait some times ,the application will work itself ,when you see "press any key to continue" ,all be done~!
After these steps, your phone will reboot into recovery mode ,which is showing the vision 5.0.2.6 and with a blue menu.
By the way, you can use your own recovery.img to instead of the recovery.img in the folder,but you must name it as "recovery.img" .
You should have succeed !

No replies ,,,,,

Or you could download clockworkmod, put on sd card and it installs itself.

Yeah just downloading and placing the clockwork recovery zip on the root of the SD card is a much faster process.
sent using tapatalk

Yeah,it a normal way to flash recovery,but in China, someone locked hboot to forbidden others flash it ,and planted some applications in the phone that not welcome by users. So, I found this method to solve this problem .

I see, so this is a good bit of knowledge to have in case someone does the same later.
sent using tapatalk

ren cai a ! haha....jushuo zhege banfa zhende neng gaoding cid 11111111
---------- Post added at 05:37 AM ---------- Previous post was at 05:22 AM ----------
mofei LZ shi 风行

zhuru123 said:
ren cai a ! haha....jushuo zhege banfa zhende neng gaoding cid 11111111
---------- Post added at 05:37 AM ---------- Previous post was at 05:22 AM ----------
mofei LZ shi 风行
Click to expand...
Click to collapse
Any CID is available. You should read the quote on bbs.hiapk.com

neng shuo putong hua bu ? ni shuo de sha yisi ?
---------- Post added at 08:06 AM ---------- Previous post was at 07:53 AM ----------
哎。。。据说现在有son的病毒机了。。楼主又要加油了。、。。。

zhuru123 said:
neng shuo putong hua bu ? ni shuo de sha yisi ?
---------- Post added at 08:06 AM ---------- Previous post was at 07:53 AM ----------
哎。。。据说现在有son的病毒机了。。楼主又要加油了。、。。。
Click to expand...
Click to collapse
Chines is not allowed here .... I know someone locked hboot on s-on devices ,if you want to know more information that be wrote by Chinese about this, bbs.hiapk.com may fit you more ......

ruguo ni zai WUHAN wo keyi gao dao zhezhong shouji ,keyi jie ni yanjiu....ENGLISH wo zhi neng yuedu ,bu neng biaoda chulai ...ni you QQ mei ...wo dandu gei ni shuo ~~

S-Off might be difficult - but maybe we can work around

Hi,
nobody knows me, thats just fine . What I m currently doing is I m trying to find out if there´s a suitable software-way to work around that messy S-Off problem.
Whats the idea?:
The idea is quite simple, the current hboot 1.31 already supports all branded devices.
Seriously?
Yea, seriously.
If you unpack the current hboot and open it using a text-editor like Windows editor you´ll find the following lines
NORMAL RECOVERY_UPDATE_RADIO RECOVERY_UPDATE_HBOOT RECOVERY_UPDATE_ZIP RECOVERY_UPDATE_COMBO HTCBL BOOTPROFILING SDUPDATE RECOVERY_MANUAL POWERTEST RECOVERY_POWERTEST OFFMODE_CHARGING RECOVERY_OFFMODE_CHARGING MFGKERNEL MFGKERNEL_DEBUG MFGKERNEL_58 SECURITY_RESET REBOOT_BOOTLOADER POWER_DOWN HBOOT_USB FACTORYRESET SYSINFO IMGCRC NORMAL_DIAG RAMDUMP2EMMCDUM RAMDUMP2USB RAMDUMP2SD 9KRAMDUMP 9KRAMDUMP2SD MODEMPATHON MODEMPATHOFF LOGGERSETTING LOGGERON LOGGEROFF LOGGERTOINTERNAL LOGGERTOSD DIAG MODEM_CALIBRATION Dopod-China DOPOD701 Open-Channel HTCCN701 CT HTCCN702 CU HTCCN703 CMCC-TD HTCCN704 TMUS T-MOB010 TMD T-MOB101 TMA T-MOB102 TMNL T-MOB003 TMCZ T-MOB004 TMUK T-MOB005 TMHR T-MOB006 TMH T-MOB007 TMSK T-MOB008 Era T-MOB009 TMMK T-MOBL11 VODA-UK VODAP001 VODA-Germany VODAP102 VODA-Italy VODAP405 VODA-SFR VODAP203 VODA-Spain VODAP304 VODA-Netherland VODAPE17 VODA-Ireland VODAP019 VODA-Greece VODAP006 VODA-Portugal VODAPD18 VODA-Swisscom-WWE VODAP015 VODA-Swisscom-DE VODAP110 VODA-Swisscom-FR VODAP212 VODA-Swisscom-IT VODAP416 VODA-Australia VODAP021 VODA-New-Zealand VODAP022 VODA-Mobilkom VODAP120 VODA-Proximus VODAP024 VODA-TR VODAPM27 ORANGE-French ORANG202 ORANGE-UK ORANG001 ORANGE-ES ORANG309 ORANGE-BE ORANG012 ORANGE-PO ORANG008 ORANGE-CH-FRA ORANG203 ORANGE-CH-GER ORANG104 ORANGE-SK ORANG006 ORANGE-PL ORANGB10 ORANGE-AT ORANG113 GOOGLE GOOGL001 TELEF-Spain TELEF301 TELUS TELUS001 DCM DOCOM801 ATT CWS__001 Brightstar-SPA BSTAR301 Brightstar-PTB BSTAR502 VIRGIN-UK VIRGI001 O2-UK O2___001 HTC-Czech HTC__C24 HTC-Denmark HTC__F08 HTC-Norway HTC__H10 HTC-Sweden HTC__G09 HTC-Poland HTC__B25 HTC-Russia HTC__A07 HTC-Turkey HTC__M27 HTC-GCC HTC__J15 HTC-Australia HTC__023 HTC-Singapore HTC-FRA HTC__203 StarHub-Singapore VODA-Africa-South AirTel-India TIM-Italy TIM__401 H3G-Italy H3G__402 Optus-Australia OPTUS001 Hutch-Australia HUTCH001 SMC-Voda-HK SMCVD001 Chunghwa-Taiwan CHT__601 Rogers ROGER001 HTC-EastEurope HTC__032 HTC-GER HTC__102 HTC-ITA HTC__405 HTC-Dutch HTC__E11 HTC-Nor HTC__Y13 HTC-WWE HTC
You see - all there.
So, Vodafone and all the others can stopp telling is their branded devices are not yet supported - bull****.
So, I´m trying to find a way to edit files in a way that the installer believes the currently plugged device is supported - even in case its got a totally different CID.
Dunno if this will work in any possible way...but hey, at least a try.
Regards
*Edit: If anyone found an HOX RUU from Asia for JB - that would be quite helpful.

Of course it supports every single HTC One X, regardless of CID, but:
If you change any file the signature will be broken, will not work. If you look at the header of the zip file in a hex editor, there is a 256-byte long signature that no one knows how to decrypt.
(I'm talking about the firmware.zip)

tomascus said:
Of course it supports every single HTC One X, regardless of CID, but:
If you change any file the signature will be broken, will not work. If you look at the header of the zip file in a hex editor, there is a 256-byte long signature that no one knows how to decrypt.
(I'm talking about the firmware.zip)
Click to expand...
Click to collapse
Well...yea...so I tried to change some files in the temp folder of windows during the installation - and that worked. Dunno what I can make of that but I ll keep u updated. So much for now:
Current version: 2.xxx
Version to install: strange asian signes
Ok.
Finished - device not bricked.
I keep working
*Update: Hmpf...not working the way I hoped it would. I can install using the stock ruu with hboot 1.31....but its still not starting :/

I don't mean to be a downer, and good on you for giving it a go. But this has already been tried long ago.
Any modification you make will break the signature. The only way to get around it is to decrypt the signature so we can sign whatever zip files we want. Then we could flash an S-OFF HBOOT.

Illux said:
Well...yea...so I tried to change some files in the temp folder of windows during the installation - and that worked. Dunno what I can make of that but I ll keep u updated. So much for now:
Current version: 2.xxx
Version to install: strange asian signes
Ok.
Finished - device not bricked.
I keep working
*Update: Hmpf...not working the way I hoped it would. I can install using the stock ruu with hboot 1.31....but its still not starting :/
Click to expand...
Click to collapse
hello your hox has the cid VODAAP102???
you can make a small guide on how to do?

Sentinel196 said:
I don't mean to be a downer, and good on you for giving it a go. But this has already been tried long ago.
Any modification you make will break the signature. The only way to get around it is to decrypt the signature so we can sign whatever zip files we want. Then we could flash an S-OFF HBOOT.
Click to expand...
Click to collapse
Why is everyone so quick to shut down new attempts to achieve S-Off? The Church of Xmoo will only get you so far, especially when Xmoo doesn't even have a HOX any more.
Sent from my HTC One X using Tapatalk 2

Exactly 1 person attempting something is better than everyone just keeping quiet and whining about no S-Off.

New attempts with old techniques is not new attempts, it's confirming what we already know.
I'm not sure anybody would complain about new threads with new information or actual progress.

Exactly.
All I'm saying is that this idea has already been tried and verified as not working, and pointing this out so no-one wastes time trying something old when they could be trying something new.

Well he is trying .. Let him do it. No one can directly go to advance mathematics until he learns the basics.

Forget the zip file...
The 'new' bootloader is signed, and the 'existing bootloader' will verify the signature on the phone itself, before reflashing itself.
Sadly, and 'hack' on the PC side is wasted... a fully intact 'signed' package has to be sent to the phone/device.
The zip is irrelevant, it's opened by the RUU and the contents sent to the device in individual signed packages.
The procedure goes like this:
RUU / PC unpacks the zip.
The components of the zip are sent one by one to the phone ... i.e. Bootloader, Recovery, ROM etc.
Some of those components, particularly bootloader are signed, and the signature is checked on the phone.
You can change the files as much as you like on the PC... modifying the ROM image should still work (but of course, you'll create a corrupt ROM).
If you try to change the bootloader package (which is signed) then it will be rejected by the phone. A single byte change will result in an entirely new checksum / signature.
To generate the correct signature you need two things....
1) The algorithm for generating a new signature for the modified file
2) The 'key' which is used to encrypt the data (top secret!)
Statistically, it would take many years to 'brute force' guess the key, and you'd probably ruin your handset flashing it so many times too.
They key isn't likely to be leaked.
So, there's another way:
HTC allow some service centers to reflash the devices, but this requires special hardware and software that's not easy to replicate and hasn't been leaked yet. The presence of this hardware will 'permit' full reflashing of the device, and therefore S-OFF.

Have you guys see this?
--see below--

farhanito said:
Have you guys see this?
http://forum.xda-developers.com/showthread.php?p=5
Click to expand...
Click to collapse
broken link

Sentinel196 said:
broken link
Click to expand...
Click to collapse
arrgh, sorry.. darn tapatalk
http://forum.xda-developers.com/showpost.php?p=34888895&postcount=57
it's about Flash Image GUI by joeykrim

Based on my understanding, it simplifies the "fasboot flash recovery/boot" commands. Anything else I've missed?
Sent from my HTC Desire S using xda app-developers app

Skanob said:
Based on my understanding, it simplifies the "fasboot flash recovery/boot" commands. Anything else I've missed?
Sent from my HTC Desire S using xda app-developers app
Click to expand...
Click to collapse
It doesn't look like it's helping with the OP's objective....

Not s-off, i know...
But the possibility of flashing kernels without fastboot and plugging to a computer is nice enough i think..
Sent from my HTC One X using Tapatalk 2

I wish I knew how to link a post from another discussion area. There is a Russian dev in HTC DNA General who's posted subject S-Off Is Possible While its specific to the Snapdragon CPU and consensus is his claim is legit and to be made available soon, on pg 5, the dev mentions he's getting a HOX to try and get S-Off. Important point here is another dev taking an interest in a HOX. So someone here can kindly point out to him the challenges already attempted.
Sent from my Desire HD using xda app-developers app

Y2KoaS said:
I wish I knew how to link a post from another discussion area. There is a Russian dev in HTC DNA General who's posted subject S-Off Is Possible While its specific to the Snapdragon CPU and consensus is his claim is legit and to be made available soon, on pg 5, the dev mentions he's getting a HOX to try and get S-Off. Important point here is another dev taking an interest in a HOX. So someone here can kindly point out to him the challenges already attempted.
Sent from my Desire HD using xda app-developers app
Click to expand...
Click to collapse
Here you go. He says the method for achieving s-off on the DNA will work on a rate of 80% on the hox too. Sounds....strange. Anyways, heres the link to his post and thread.
http://forum.xda-developers.com/showthread.php?p=34960158
http://forum.xda-developers.com/showthread.php?t=2026033
-----------update-----------
Nevermind, he is talking about the At&t one x.
Sent from my HTC One X using xda premium

So close, but so far.
Sent from my HTC One X using Tapatalk 2

Please... I need a OTA file for HTC One M9s / M9e - HIMAR UHL.

Does Anyone know where I can find an OTA file HTC M9e / M9s also called HIMAR UHL ??
IT's the Asian version from Taiwan.
Follows some device information:
(bootloader) kernel: lk
(bootloader) product: htc_himaruhl
(bootloader) version: 1.0
(bootloader) version-main: 1.10.709.2
(bootloader) boot-mode: download
(bootloader) version-bootloader: 1.01.0000
(bootloader) mid: 2PRG10000
(bootloader) cid: HTC__621
Please, I really need this.
thank you in advance.

There is a thread in the General section of the M9 forums titled HTC ONE M9 Stock File Collection (RUUs, Backups, etc.) - with linked Instructions. It has a collection of resources, particularly in post #6 of the thread.
My favorite resource in that thread is Flippy498's Google Sheet, which has a tab dedicated to RUUs & a tab dedicated to OTAs. In both, there is a section dedicated to HTC Asia (Taiwan). Check it out, see if it it has what you're looking for.

computerslayer said:
There is a thread in the General section of the M9 forums titled HTC ONE M9 Stock File Collection (RUUs, Backups, etc.) - with linked Instructions. It has a collection of resources, particularly in post #6 of the thread.
My favorite resource in that thread is Flippy498's Google Sheet, which has a tab dedicated to RUUs & a tab dedicated to OTAs. In both, there is a section dedicated to HTC Asia (Taiwan). Check it out, see if it it has what you're looking for.
Click to expand...
Click to collapse
thanks for replying, but unfortunately it does not have the OTA file I need, have only HTC ONE M9 files (Hima) not HTC ONE M9e / M9s (HimaR).
the HTC M9e uses a MediaTek processor and HTC M9 it's a Qualcomm version.
I've looked in many places already, I did not find the right OTA file anywhere... for the M9e / HTC ONE M9s version.
with the OS version 1.10.709.2.
but thanks again, I hope that someone has better luck than me to find.

edu22w said:
thanks for replying, but unfortunately it does not have the OTA file I need, have only HTC ONE M9 files (Hima) not HTC ONE M9e / M9s (HimaR).
the HTC M9e uses a MediaTek processor and HTC M9 it's a Qualcomm version.
I've looked in many places already, I did not find the right OTA file anywhere... for the M9e / HTC ONE M9s version.
with the OS version 1.10.709.2.
but thanks again, I hope that someone has better luck than me to find.
Click to expand...
Click to collapse
Well, here is what my Google-fu has come up with. No guarantees, but maybe this will help.
I found this site that directly mentions CID HTC__621. Doing a Google search for "2PRGIMG_HIMAR_UHL_L50_SENSE70_hTC_Asia_TW_1.10.709.2_Radio_1.1506V24P59.2508.1112_HT[W.T]_release_464157_signed_2_4.zip" didn't turn anything up, but doing a Google search for a shortened version of the file name turned up some downloads.
Here's the problem - this isn't an RUU and I have no way to help you verify if it's the right file or even what you needs. I found an RUU file, but it looks to be for the wrong CID, even the MID is correct. (notice that there is a password to extract the RUU from the zip - it's given in the thread linked)
It may be helpful to examine the files & filenames and use them to search XDA and Google to find the appropriate files. At the least, it's a starting point.
---------- Post added at 11:25 PM ---------- Previous post was at 11:12 PM ----------
So, it looks like there are some RUU files that match that filename, but you can't access the files without a membership - a paid membership. The lowest membership cost is $15 for 30 days, but I have no experience with this website and can't speak to its legitimacy.
---------- Post added at 11:31 PM ---------- Previous post was at 11:25 PM ----------
Sorry for the triple post here. But this may be (maybe) a compatible RUU for your phone - and no access fee. However, it looks like it is a lower bootloader version (1.03.709.13) - I don't know if you can use it. My understanding is that trying to install an RUU that is a lower version than your current version is a no-go.

I would question why you want the ota.. If you want to upgrade to marshmallow just root, s-off & flash an unsigned zip. Job done.
If it's to unbrick you can try a phone repair store or if your carrier has local stores you can try one. Sometimes they have a db of roms.
Sent from my HTC One M9 using Tapatalk

computerslayer said:
Well, here is what my Google-fu has come up with. No guarantees, but maybe this will help.
I found this site that directly mentions CID HTC__621. Doing a Google search for "2PRGIMG_HIMAR_UHL_L50_SENSE70_hTC_Asia_TW_1.10.709.2_Radio_1.1506V24P59.2508.1112_HT[W.T]_release_464157_signed_2_4.zip" didn't turn anything up, but doing a Google search for a shortened version of the file name turned up some downloads.
Here's the problem - this isn't an RUU and I have no way to help you verify if it's the right file or even what you needs. I found an RUU file, but it looks to be for the wrong CID, even the MID is correct. (notice that there is a password to extract the RUU from the zip - it's given in the thread linked)
It may be helpful to examine the files & filenames and use them to search XDA and Google to find the appropriate files. At the least, it's a starting point.
---------- Post added at 11:25 PM ---------- Previous post was at 11:12 PM ----------
So, it looks like there are some RUU files that match that filename, but you can't access the files without a membership - a paid membership. The lowest membership cost is $15 for 30 days, but I have no experience with this website and can't speak to its legitimacy.
---------- Post added at 11:31 PM ---------- Previous post was at 11:25 PM ----------
Sorry for the triple post here. But this may be (maybe) a compatible RUU for your phone - and no access fee. However, it looks like it is a lower bootloader version (1.03.709.13) - I don't know if you can use it. My understanding is that trying to install an RUU that is a lower version than your current version is a no-go.
Click to expand...
Click to collapse
Thank you for the information, I will try to use these files.
I have a question, I do not have much knowledge about it, but those files marked as signed, they are able to receive OTA updates?
very grateful for your help.

shivadow said:
I would question why you want the ota.. If you want to upgrade to marshmallow just root, s-off & flash an unsigned zip. Job done.
If it's to unbrick you can try a phone repair store or if your carrier has local stores you can try one. Sometimes they have a db of roms.
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
I need the OTA file, because this device belongs to a person who does not really understand how these things work and he eventually found some things on the internet and tried to put the device even without knowing very well what he was doing, now he can not get the OTA updates.

edu22w said:
Does Anyone know where I can find an OTA file HTC M9e / M9s also called HIMAR UHL ??
IT's the Asian version from Taiwan.
Follows some device information:
(bootloader) kernel: lk
(bootloader) product: htc_himaruhl
(bootloader) version: 1.0
(bootloader) version-main: 1.10.709.2
(bootloader) boot-mode: download
(bootloader) version-bootloader: 1.01.0000
(bootloader) mid: 2PRG10000
(bootloader) cid: HTC__621
Please, I really need this.
thank you in advance.
Click to expand...
Click to collapse
Did you find the rom for the M9e (HIMAR)? I tried all links provided in this forum and no way... Thanks! Hi, I am with my phone bricked and cannot boot. I made a mistake while wiping to factory, and wiped all the phone system.

ggleup said:
Did you find the rom for the M9e (HIMAR)? I tried all links provided in this forum and no way... Thanks! Hi, I am with my phone bricked and cannot boot. I made a mistake while wiping to factory, and wiped all the phone system.
Click to expand...
Click to collapse
You can use these files to unbrick your phone
https://www.androidfilehost.com/?fid=24459283995312105
https://www.androidfilehost.com/?fid=24459283995312106
https://www.androidfilehost.com/?fid=24421527759889622

Code:
(bootloader) kernel: lk
(bootloader) product: htc_himaruhl
(bootloader) version: 1.0
(bootloader) imei: 354073070255939
(bootloader) version-main: 1.10.709.2
(bootloader) boot-mode: RUU
(bootloader) version-bootloader: 1.01.0000
(bootloader) mid: 2PRG10000
(bootloader) cid: HTC__621
SAME CID MID need update zıp fıle

https://super-firmware.com/index.php?a=browse&b=category&id=4854
3$ 1 day 5gb limit
Tapatalk kullanarak iPhone aracılığıyla gönderildi

gencom said:
Code:
(bootloader) kernel: lk
(bootloader) product: htc_himaruhl
(bootloader) version: 1.0
(bootloader) imei: 354073070255939
(bootloader) version-main: 1.10.709.2
(bootloader) boot-mode: RUU
(bootloader) version-bootloader: 1.01.0000
(bootloader) mid: 2PRG10000
(bootloader) cid: HTC__621
SAME CID MID need update zıp fıle
Click to expand...
Click to collapse
Do you know where to get the rom stock of that?

X800 doesn´t start after flashing twrp and SuperSU

Hey guys i have a problem,
today i installed twrp on my x800. It worked without problems, then i installed SuperSU with twrp and now the phone does nothing. i tried every combination of holding the buttons but nothing happens. I cant get into the bootloader or anything. When i plug the phone in my pc it gets shown as unknown USB device. What can i do to get my phone back?

Marvinmaster said:
Hey guys i have a problem,
today i installed twrp on my x800. It worked without problems, then i installed SuperSU with twrp and now the phone does nothing. i tried every combination of holding the buttons but nothing happens. I cant get into the bootloader or anything. When i plug the phone in my pc it gets shown as unknown USB device. What can i do to get my phone back?
Click to expand...
Click to collapse
Hi,
maybe this process will revieve you X800:
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/ or
https://boycracked.com/2016/01/22/h...r-all-android-device-based-on-qualcomm-chips/

Ok thanks it seems that my phone is hardbricked. I wanted to flash it wit Qfil but i dont know where to get the right files the normal rom doesnt has the files i need.

Marvinmaster said:
Ok thanks it seems that my phone is hardbricked. I wanted to flash it wit Qfil but i dont know where to get the right files the normal rom doesnt has the files i need.
Click to expand...
Click to collapse
Hi,
not tested but I downloaded those files for unbricking from various places:
https://onedrive.live.com/redir?res...9904&authkey=!AA21BJTjQZOwDb8&ithint=file,zip

thanks for your answer. I made this but i got this error:
!!!!!!!! WARNING: Flash programmer failed to load trying to continue !!!!!!!!!
Programming EMMC device using SECTOR_SIZE=512
<?xml version = "1.0" ?><data><configure MemoryName="emmc" ZLPAwareHost="1" SkipStorageInit="0" SkipWrite="0" MaxPayloadSizeToTargetInBytes="16384"/></data>

ERROR: No response to configure packet
Status: 21 (null)

Marvinmaster said:
thanks for your answer. I made this but i got this error:
!!!!!!!! WARNING: Flash programmer failed to load trying to continue !!!!!!!!!
Programming EMMC device using SECTOR_SIZE=512
<?xml version = "1.0" ?><data><configure MemoryName="emmc" ZLPAwareHost="1" SkipStorageInit="0" SkipWrite="0" MaxPayloadSizeToTargetInBytes="16384"/></data>
ERROR: No response to configure packet
Status: 21 (null)
Click to expand...
Click to collapse
Hi,
maybe you can try to use this QPST 2.7.422 (QFIL) software version:
https://onedrive.live.com/redir?res...1875&authkey=!ALtL24jxYBSXh0M&ithint=file,zip
and follow this instructions: https://boycracked.com/2016/01/22/h...r-all-android-device-based-on-qualcomm-chips/
QPST Screenshot...
https://onedrive.live.com/redir?res...authkey=!ACn7TnC4AC7FaAI&v=3&ithint=photo,png
I hope you will be able to fix your phone....

BetaHydri said:
Hi,
maybe you can try to use this QPST 2.7.422 (QFIL) software version:
https://onedrive.live.com/redir?res...1875&authkey=!ALtL24jxYBSXh0M&ithint=file,zip
and follow this instructions: https://boycracked.com/2016/01/22/h...r-all-android-device-based-on-qualcomm-chips/
QPST Screenshot...
https://onedrive.live.com/redir?res...authkey=!ACn7TnC4AC7FaAI&v=3&ithint=photo,png
I hope you will be able to fix your phone....
Click to expand...
Click to collapse
Shouldn't you use the prog_emmc_firehose_8994_lite.mbn file? And please note you have to reset the device (press power for like 30 seconds) every time you attempt a QFIL flash, COM port shuts down itself after every flash attempt.
http://forum.le.com/us/index.php?threads/please-provide-technical-stuff-about-how-to-bring-back-to-life-a-hard-bricked-dead-x800-pro.264/

I made it like you said but then i got this error after a long time nothing happend:
Sending NOP
NOP: Fail Code: 10
Unable to send FireHose NOP, Device is not in Firehose mode !
Download Fail:System.Exception: Failed to send Firehose NOP to the phone.
bei QC.QMSLPhone.Phone.QPHONEMS_FireHoseNOP()
bei QC.SwDownloadDLL.SwDownload.FireHoseDownloadImage(Boolean bResetPhone, List`1 rawprogramFilesList, List`1 patchFilesList, Single& fImageSizeInMB, Single& fThroughput)
Download Fail:FireHose Fail FireHose Fail
Finish Download

Same error happens on mine too... I guess the QFIL zip file is wrong, probably a different revision. When and where did you buy yours?
Inviato dal mio HTC One utilizzando Tapatalk

teorouge said:
Same error happens on mine too... I guess the QFIL zip file is wrong, probably a different revision. When and where did you buy yours?
Inviato dal mio HTC One utilizzando Tapatalk
Click to expand...
Click to collapse
There seems to be variants of the LETV 1Pro out there.
http://www.androidiani.com/forum/mo...rsione-usa-ovvero-le1pro_us-marchiato-ce.html
The Qfil that I downloaded in the web and posted here seems to be from the chinese version. So maybe this is the problem !
The FCC Infos are also quite interessting, as they confirm that the phone can handle various frequencies...
https://fccid.io/2AFWMLE1PRO
---------- Post added at 07:18 PM ---------- Previous post was at 07:02 PM ----------
BetaHydri said:
Hi,
maybe you can try to use this QPST 2.7.422 (QFIL) software version:
https://onedrive.live.com/redir?res...1875&authkey=!ALtL24jxYBSXh0M&ithint=file,zip
and follow this instructions: https://boycracked.com/2016/01/22/h...r-all-android-device-based-on-qualcomm-chips/
QPST Screenshot...
https://onedrive.live.com/redir?res...authkey=!ACn7TnC4AC7FaAI&v=3&ithint=photo,png
I hope you will be able to fix your phone....
Click to expand...
Click to collapse
This seems to be the same error for another user with brickt LeTV LE1 Pro
http://www.letv.re/topic/177-bricked-phone-x800/

That would be me, I've posted in many places in the last days asking for help! XD

teorouge said:
That would be me, I've posted in many places in the last days asking for help! XD
Click to expand...
Click to collapse
Then hopefully someone will provide you/us with a compatible QFil for the US/CE version.
Or someone finds out which sources/files have to be changed/replaced inside the QFil chinese package ?
For example when you decompress an original ROM (in this case a chinese one) you find some of the files that are also located inside the QFil package. Question if this is sufficient for the whole Qfil flashing process. So I meen replacing the files from an original US ROM with those inside the chinese QFil sources ???
X:\X1_X800-CN-FN-BEXCNFN5501304131S-5.5.013S\firmware-update
------ 09.04.2015 12:11 443904 BTFM.bin
------ 09.04.2015 12:11 518820 emmc_appsboot.mbn
------ 09.04.2015 12:11 66560 hyp.mbn
------ 09.04.2015 12:11 76158464 NON-HLOS.bin
------ 09.04.2015 12:11 39080 pmic.mbn
------ 09.04.2015 12:11 195468 rpm.mbn
------ 09.04.2015 12:11 624976 sbl1.mbn
------ 09.04.2015 12:11 527744 tz.mbn
X:\X1_X800-CN-FN-BEXCNFN5501304131S-5.5.013S
------ 09.04.2015 12:11 27492646 boot.img
------ 09.04.2015 12:11 268435456 bootvideo.img
------ 09.04.2015 12:11 36909 file_contexts
------ 09.04.2015 12:11 169 ota_info.txt
------ 09.04.2015 12:11 62914560 splash.img
------ 09.04.2015 12:11 1968156672 system.new.dat
------ 09.04.2015 12:11 0 system.patch.dat
------ 09.04.2015 12:11 574 system.transfer.list

Yeah, I saw that too but I fear we have wrong rawprogram, patch or prog_emmc_firehose_8994 files... And those should be device and revision specific, so we must hope someone actually gives them away (LeTV USA tech support maybe? I begin to fear they don't even have one and fix phones only by exchanging motherboards...).
Inviato dal mio HTC One utilizzando Tapatalk

teorouge said:
Yeah, I saw that too but I fear we have wrong rawprogram, patch or prog_emmc_firehose_8994 files... And those should be device and revision specific, so we must hope someone actually gives them away (LeTV USA tech support maybe? I begin to fear they don't even have one and fix phones only by exchanging motherboards...).
Inviato dal mio HTC One utilizzando Tapatalk
Click to expand...
Click to collapse
Yes, you're probably right with this assumption. I bought last week another one at
Efox: http://www.efox-shop.com/letv-le1-p...-55-zoll-2k-bildschirm-android-50-4g-g-305444
I should get it the next days and regarding the picture it's also a CE Version.

Let's hope someone will shed some light in the meantime..
BTW this is an interesting reading: http://forum.xda-developers.com/win...te-rawprogram0-xml-ffu-file-extract-t3385201/

teorouge said:
Let's hope someone will shed some light in the meantime..
BTW this is an interesting reading: http://forum.xda-developers.com/win...te-rawprogram0-xml-ffu-file-extract-t3385201/
Click to expand...
Click to collapse
Yes I noticed also that the described tool emmcdl.exe is also available inside the chinese QFIL LETV resources.
---------- Post added at 11:42 PM ---------- Previous post was at 11:25 PM ----------
BetaHydri said:
Yes I noticed also that the described tool emmcdl.exe is also available inside the chinese QFIL LETV resources.
Click to expand...
Click to collapse
The emmcdl.exe tool is similar to the thor2.exe to flash Windows 8/10 Mobile SmartPhones with Snapdragon SOCs.
thor2.exe comes with the Windows Device Recovery Software.
Btw: THe emmcdl.exe in the chinese Qfil sources is Version 2.2. So i think newer than the one you can download for the DragonBaord Tool.

im in trouble i have tried many things and i cant make my computer recognizes de device as a qualcom, almost all the time is unknown device or if i fastboot its a android bootloader but never qualcomm 9008 can somebody help me, cuz im stuck with the penguin logo or either the screen completely off.

......

BetaHydri said:
There seems to be variants of the LETV 1Pro out there.
http://www.androidiani.com/forum/mo...rsione-usa-ovvero-le1pro_us-marchiato-ce.html
The Qfil that I downloaded in the web and posted here seems to be from the chinese version. So maybe this is the problem !
The FCC Infos are also quite interessting, as they confirm that the phone can handle various frequencies...
https://fccid.io/2AFWMLE1PRO
---------- Post added at 07:18 PM ---------- Previous post was at 07:02 PM ----------
This seems to be the same error for another user with brickt LeTV LE1 Pro
http://www.letv.re/topic/177-bricked-phone-x800/
Click to expand...
Click to collapse
Hi do you have a link for CN Version the files i need to flash?

G7plus(G8)Thailand

Huawei g7 plus Rio l02 Rom 6.0.1
RIO - L02C636B310
Bluid - CUSTC636D001
*** I backup from twrp
I do not know whether this was done or predators. Who knows your help
Unzip and use twrp reinstate.

Sorry for my English. Now I'm back and rom huawei rio l02 android 6.0.1

: P Upload them not Wait posts to 10 posts. To share files
: EEK: I'll post something :สับสน::สับสน::สับสน:

I Chaer file in Google drive ([email protected])
# extract zip and then use twrp restore.

Root ok

i need i need thank you so much