Hello,
I recently bought a "NewerStone" android head unit off Amazon for a 2013 Suzuki SX4. The head unit works great ... until seemingly random exclamation points start flashing and audio cuts out. It eventually resolves after a few flashing/sliding exclamation points only to randomly happen again later. I can't seem to isolate a cause. Anyone have any ideas? Thanks ...
MCU version
MTCC-KLD6-V2.97
Android version
5.1.1 1024x600
Kernel version
3.0.101+
[email protected] #32
Build number
rk3188-userdebug 28092016
Related
Hello to everyone, I'm new to this section.
I live in Poland and recently I bought new Hyundai i40 from 2013. The car was imported from Libya and have no warranty. I have there Android Head Unit, but same Android Head Units intended for the Libya market are different from those intended for the European market.
I'm looking for this Unit brand and update for it.
I searched info about it few days, but with no satisfactory results. I also browsed Car Multimedia Player section on AliExpress with i40 inquiry and it gives me this:
https://www.aliexpress.com/item/102...-1-Car-Radio-for-Hyundai-i40/32754856972.html
https://www.aliexpress.com/item/Gol...013-2014-2015-Car-DVD-Player/32592921236.html
https://www.aliexpress.com/item/New...oid-5-1-1-Car-DVD-player-for/32757982815.html
https://www.aliexpress.com/item/102...ndai-i40-2011-2012-2013-2014/32764309768.html
https://www.aliexpress.com/item/New...d-5-1-1-Car-DVD-Stereo-Radio/32756471412.html
This 5 players looks identically like mine. But there is Android 5.1.1., mine have 4.4.4. I also asked resellers for update, but they replied that they are not authorized (if I were their customer, it would not be a problem).
I also leave here information contained in About tablet Settings section, it may be useful, I think.
Model number: S07
S/N: 87012d1a0202110507e00a5133504b52
MCU version: MTCB-KSP-V2.85 Jan 28 2016 16:13:39
Android version: 4.4.4_25052016
Kernel version: 3.0.36+ [email protected] #1502 Wed May 25 13:43:31 CST 2016
Build number: rk3188-eng4.4.4 25052016.17:53:24
CPU: ARM [email protected] (x4)
Memory: 1024 MB
Display: 1024x600
I saw topic about MCU files here and there is KSP version. But nowhere I can't find system update.
Maybe my solution is to install Malaysk ROM? But it's not Android phone and I would prefer to use the official system.
I'm counting for your help.
Thanks.
I back with some, may be useful, information.
After a long time digging on the Internet, I found that the manufacturer of my device is Cusptech. I wrote an email to them (on [email protected]), but without response. So, I came up with an idea to search them using their website address on Facebook. I found there posts their Sales Menager and I wrote a message to him. After a short exchange of sentences, he confirmed this is their product and sent me latest MCU and software update files.
This is the last build of Android 4.4.4. They will not develop it anymore.
MCU file is quite new, but I did not ask for their plans about developing it.
The Menager stated that due to hardware differences, only version 4.4.4 is compatible with my device.
MCU version:
MTCB-KSP-V3.06
May 03 2017 19:42:37
DOWNLOAD
Android version:
4.4.4_22102016
Build number:
rk3188-eng4.4.4 22102016.13:17:44
Interface:
Golden
Resolution:
1024x600
DOWNLOAD
I share with it, because I saw similar topics on other sites. Maybe someone will need it.
Hello guys, so I can not post into MTCD forum, thats why i posted here. I have got a random headunit from a friend to repair, said it was working before but he applied an update and since then it is just a boot loop. So my guess is they put the wrong kind of software on it, i have already tried factory rom, and two custom roms, yet it still restarts. The strange is that rarely it boots up. When starting it shows a BMW logo and sometimes artifacts too. Can anybody help me in telling what kind of software do i need, is it maybe a hardware problem? I can enter in recovery, i can flash new roms on to it, but i just cant find why is it in boot loop..
thanks in advance, here is some extra infos:
MCU version：
MTCD_KD_V2.16_2
Feb 10 2017 14:28:05
Android version：
5.1.1
Kernel version：
3.0.101+
[email protected] #54
Wed Dec 21 11:22:23 CST 2016
Build number：
rk3188-userdebug 21122016.15:16:21
Hello,
My name is Hans and I am from Germany. My english is not the best, but I try very hard.
I have a Erisin ES6291V PX6 4GB RAM 32GB memory. Unfortunately, this is not a device with MTCx MCU, but with STM32, so I can not use any of the popular custom ROMs (Hal9k, Malaysk). Is this right?
Is there any custom roms for this device or is it to be expected that will be available in the future?
Here I still have the original firmware from the device.
Unfortunately, I can not set the link here yet.
Android Version: 9
Hardware- Information: RK3399 ROM 23GB - LPDDR4 4GB - 1024x600
Kernel Version: Linux 4.4.167+ - Wed Sept 4 11:03:43 CST 2019
OS Version: HC1E0201-P0N-1.1.4.3.1 - BLINK161 - 20190904 - 701F
MCU Version: STM32-20190828-11-KC6-30
Thanks
I plan to buy the same HU with you and concern about the speed & quality. Is it good? Any issue with hardware or software?
mrVuHoa said:
I plan to buy the same HU with you and concern about the speed & quality. Is it good? Any issue with hardware or software?
Click to expand...
Click to collapse
Suggest avoiding and looking for an MTCD/E PX6 - based on number of threads, modified ROMs, recovery from brick and extensive info.
Hi Folks!
I got Erisin HU (ES6291V)
Detailed info is here
I was able to enable 48 hours sleep mode in factory settings menu. But when I set, the HU become unstable and sometimes does not start (black screen, have to reset), or does not go to sleep and suck the accumulator of the car. Is there a fix for this problem? Do you have got a MCU and/or firmware update for it? What is your advice?
Thank you in advance!
Not MTCB, suggest posting in Android Head units forum.
Hi all,
I have recently bought a car, which has an older Pumpkin unit installed. However, this unit is running very slow and near impossible to use.
Therefore, I want to know if I can upgrade the unit with new firmware?
Here is information about it:
MCU version：MTCC-KLD6-V2.91 May 31 2016 19:54:14
Android version：5.1.1 1024*600
Kernel version：[email protected] #42Tue May 17 21:50:34 CST 2016
Build number：rk3188-userdebug 01062016.18:49:08
Any help is appreciated
Hello, i have some headunit, which i bought with my car (peugeot 307). The android headunit was bought in 2018 by previous car owner, and I had troubles with my navigation app (google maps). I updated MCU to 3.49 and nothing changed, so i updated android (from 8.0 to 8.0 oreo, from yandex disk)
After updating I have problem with fading apps and icons from desktop.... it's so annoying.
I can't update to android 9.0 from that site, it shows me after few minutes of updating that this is incompatibile version (PX5, LM version - which should work).
Can you provide me an update.zip of the newest android ? I would apprecitate that!
here is some info about my PX5:
Serial number: D238DDB527A8D22F
MCU version: MTCE_LM_V3.49_1
Compilation number: px5-userdebug 8.0.0 OPR5.170623.007 eng.hct.20180607.154634 test-keys
update, still didn't updated that headunit