HotDoG for Honor 5X
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download and Features
XDA:DevDB Information
HotDoG, Kernel for the Honor 5X
Contributors
mohammadsaa, GuneetAtwal
Source Code: https://github.com/mohammadsa9/Kiwi-Pie
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 7
Beta Release Date: 2019-07-14
Created 2017-01-25
Last Updated 2019-07-14
[Download Section]
Download
[Installation]
Download the .zip file from the download link above
Get Backup (optional)
Flash the .zip file in TWRP
[Add-ons]
F2FS
Spectrum Enabler
Spectrum Profiles
[Kernel App]
Download
[F2FS Users]
Why F2FS
Formatting EXT4 to F2FS
Some tips :
First of all get a nandroid backup ! (very important)
(If you are using an outdated rom which doesn't support F2FS ) Flash F2FS addon https://www.androidfilehost.com/?fid=529152257862719182
Only format /data and /cache to F2FS ! Do NOT format system as F2FS ! MUST not work !
Formatting /data to F2FS will wipe your internal sdcard + data like factory reset (apps , ...)
You need a twrp with F2FS support ! Download TWRP NOW !
If you want to stay on F2FS on outdated roms , reflash my kernel after rom updates , recovery flashing or any modification to the boot partition ... !
Read the things in provided link for formatting ext4 to F2FS carefully ! I am not responsible for any data loss , problem , ...
[Features]
KCAL Control
BFQ, SIO, SIO+, FIOPS, ZEN, VR, Tripndroid, Maple IO Schedulers
NTFS , F2FS , EXTFAT support
CRC32 hw accelarated module
Touch boost option
Entropy patches
Power Suspend added
Compiled with LINARO UBERTC toolchain
CPU governors added : zzmoove , barry_allen , interactive_pro , intelliactive , smartassV2 , smartmax , lionfish , blazeactive , conservative , conservativex , dancedance , lionheart , hyper , wave , preservative , darkness , ondemandplus , wheatley , nightmare , impulse , bluactive , intellimm , pegasusq
Adreno idler added
Faux's Sound Control added
Fsync disable option added
Boeffla generic wakelock blocker added
Some more thermal options
USB Fast Charge (Experimental)
Safetynet bypassing ( for checking bootloader unlocked status )
Kernel samepage merging enabled (UKSM)
CPU boost options
Some other optimizations
[Changelog]
V7.0.1
initial release for Pie
V6.2
- Boeffla generic wakelock blocker added
(https://wiki.boeffla.de/index.php?ti...kelock_blocker)
-CPU wake boost driver added
-Various optimizations applied
-UKSM implemented
V6.0.1
WireGuard updated
V6
Project rebased completely based on the latest changes of stock LOS kernel
WireGuard and some other optimizations added
V5.4
worked on reported bugs
latest stock los kernel commits applies
V5.1
worked on reported bugs and some other optimizations
V5
Project rebased completely + latest stock LOS kernel commits
+ All features defined in the first page !
Experimental features added (some of them may not work currently)
-Notification LED control
-MSM Limiter
-Fingerprint boost driver
V4.5
F2FS sources completely changed now it is just like the stock LOS kernel
Zen - Fiops updated
Usb - Storage related problems fixed
Stability improvements
Ramdisk modification : GlassFish (https://forum.xda-developers.com/nexus-5x/general/guide-advanced-interactive-governor-t3269557) + Kcal tweaks + F2FS support + some more stuff applied
V4.4
NVIDIA power efficiency patches applied
Wake up delay fixed
Now all hotplug values are changeable except 2 of them
last_kmsg support added
And some more stuff
____________________________________
F2FS addon v2 : exactly same as the LOS device tree ! + F2FS guide updated !
V4.3
Fixing wake up problems
V4.2
(focused on smoothness)
Added some more governors
Fixing sleep problems
Intelli_plug updated and related problems fixed
KCAL updated
Cpu boost optimized
V4.0.9
deadlock + hotplug problems solved
V4.0.1
intelliplug enabled by default
V4.0
CPU governors added : conservative , conservativex , dancedance , lionheart , hyper , wave , preservative , darkness , ondemandplus , wheatley , nightmare
kallihunter patches added from https://forum.xda-developers.com/honor-5x/development/mod-kali-nethunter-honor-5x-t3472055
(no support for it currently ! You could manually install it's app and test ! )
Compiled with linaro 6.3.1
KSM and UKSM enabled (more free ram)
MSM performance re enabled for smoothness ( specially scrolling smoothness)
Another patch for safetynet bypassing (for checking bootloader unlocked status ) applied
And so many other optimizations
V3.5
Dynamic Fsync disabled by default for stability
Bypasses SafetyNet Unlocked Bootloader Check reverted for not causing conflict on it's function
synced with LOS kernel changes
Adding F2FS support to all roms by ramdisk modification
Using AnyKernel2
V3.3
Dynamic Fsync enabled + updated to v2
exfat support added ?!
power suspend updated to v 1.7
maple IO scheduler added
adreno idler updated
Added control for arch power and gentle fair sleepers ( it is better not to enable gentle fair sleepers and it's code edited for not causing reboot , so it may not work at all )
added toggles for wakelocks
V3.0.1
video problem solved
V3
CPU governors added : zzmoove , barry_allen , interactive_pro , intelliactive , smartassV2 , smartmax , lionfix , blazeactive
Adreno idler added
Faux's Sound Control v3 added
CPU hotplugs added : intelliplug , msm_hotplug , thunderplug
V2.5.5
battery drain solved ?! (report)
F2FS support ?I need a twrp with F2FS support to format partitions
Some power efficiency patches
other optimizations
V2.5
intellithermal added
Some enhancement for multicore Decision making
Some power efficiency patches
Some optimizations
Gentle Fair sleepers (experimental)
V2.0.7 experimental
USB FAST CHARGE added
V2.0.5 Important update
preventing from data loss please report if there is any data loss on this version !
V2.0.2
NTFS should work now
V2.0.1
Fix bootloop
V2.0
First xda release
[Frequently Asked Questions]
Q ) Who is responsible if it caused problems ?
Use my Kernel only if you are sure about the risks of flashing custom Kernel to your device. I'm not responsible for any damage caused by using my files.
Click to expand...
Click to collapse
Q ) I flashed this kernel and it caused bootloop ! What should I do ?
Press and hold volume up and power button to enter recovery then restore your nandroid backup (only boot partition , if it didn't help , restore it compeletly )
Click to expand...
Click to collapse
Q ) Can I use it on stock rom ?, What varient support this kernel , How to uninstall it ?
No , only use it for Nougat custom roms , no guarantee for all custom roms !
Click to expand...
Click to collapse
Q ) What variant support this kernel ?
If your variant supports LineageOS 14.1 => It supports this kernel !
Click to expand...
Click to collapse
Q ) How to uninstall it ?
Restore boot partition or reflash a rom !
Click to expand...
Click to collapse
Q ) How can I optimize , change , ... the parameters in this kernel ?
Use Kernel Adiutor
Click to expand...
Click to collapse
Q ) How can I find some information about parameters ?
Most up to date guide on CPU governors, I/O schedulers and more!
Click to expand...
Click to collapse
Q) Should I report problems and ask features ?
Surely yes ! but don't insist on adding features and don't report the bugs which exists in the Lineage OS kernel
Click to expand...
Click to collapse
[Credit list]crpalmer and BadDaemon for LineageOS
GuneetAtwal for his perfect kernel and without him this project was nearly impossible
osm0sis for Anykernel2
All other devs their code used in my project
Members of this perfect community who helped me in this project
(pm me If I missed anyone)
[Telegram group]For beta versions , reporting and having more friendly communication ....
Click here to join the group
Can't wait to test
Sent from my KIW-L24 using XDA-Developers Legacy app
Quick stupid question: I read through everything and I'm not seeing whether this is meant for Stock MM/CM13 or CM14/Nougat ROMS. Could you please validate which?
Wolfhawke said:
Quick stupid question: I read through everything and I'm not seeing whether this is meant for Stock MM/CM13 or CM14/Nougat ROMS. Could you please validate which?
Click to expand...
Click to collapse
Q ) Can I use it on stock rom ?
No , only use it for nougat custom roms , no guarantee for all custom roms !
Click to expand...
Click to collapse
Finally!!!! :d custom kernel!!!1 yeeaaaaahh!!
we have a kernel developer.. ooh yeah!!
Congo Bongo OP ^_^ @mohammadsaa
Hope to see more from you ^_^
BTW, kernel is stable & cool enough
P.S. Go for advanced features as Fauxx sound, sultans camera enhancements & other famous kernel optimizations eg. EXKERNEL/BLUSPARK/TYRANT/Franco etc if you want... just a suggestion...
mumith3 said:
Congo Bongo OP ^_^ @mohammadsaa
Hope to see more from you ^_^
BTW, kernel is stable & cool enough
P.S. Go for advanced features as Fauxx sound, sultans camera enhancements & other famous kernel optimizations eg. EXKERNEL/BLUSPARK/TYRANT/Franco etc if you want... just a suggestion...
Click to expand...
Click to collapse
Yeah, the world is your oyester mate!
mumith3 said:
Congo Bongo OP ^_^ @mohammadsaa
Hope to see more from you ^_^
BTW, kernel is stable & cool enough
P.S. Go for advanced features as Fauxx sound, sultans camera enhancements & other famous kernel optimizations eg. EXKERNEL/BLUSPARK/TYRANT/Franco etc if you want... just a suggestion...
Click to expand...
Click to collapse
This features would be freaking amazing!
I´m testing this kernel for the moment all is fine!
---------- Post added at 06:33 PM ---------- Previous post was at 06:23 PM ----------
Anyone can provide best configurations for this kernel?
for example: Battery Life, Performance and more...
Version 2.5 beta
Usb fast charge added (experimental)
Tons of optimizations and options ... (find them in kernel adiutor)
https://www.androidfilehost.com/?fid=817550096634741941
mohammadsaa said:
Version 2.5 beta
Usb fast charge added (experimental)
Tons of optimizations and options ... (find them in kernel adiutor)
https://www.androidfilehost.com/?fid=817550096634741941
Click to expand...
Click to collapse
Work awesome , tnx [emoji120]
Sent from my KIW-L21 using Tapatalk
mohammadsaa said:
Version 2.5 beta
Usb fast charge added (experimental)
Tons of optimizations and options ... (find them in kernel adiutor)
https://www.androidfilehost.com/?fid=817550096634741941
Click to expand...
Click to collapse
Which options?
mohammadsaa said:
Version 2.5 beta
Usb fast charge added (experimental)
Tons of optimizations and options ... (find them in kernel adiutor)
https://www.androidfilehost.com/?fid=817550096634741941
Click to expand...
Click to collapse
Whether this can be used in kiw l22 variant? Because in Android file host it is given as kiw l24 variant!!
Fdraco10 said:
Which options?
Click to expand...
Click to collapse
I'm seeing same charge time as latest mokee using stock cord. Haven't tried other functions yet.
---------- Post added at 06:25 AM ---------- Previous post was at 06:13 AM ----------
esirad said:
Work awesome , tnx [emoji120]
Click to expand...
Click to collapse
Jithin0801 said:
Whether this can be used in kiw l22 variant? Because in Android file host it is given as kiw l24 variant!!
Click to expand...
Click to collapse
Check posts. I believe should work on 21 as used on 22 as I've noticed. Always make backup in TWRP and restore boot as needed.
dave71670 said:
I'm seeing same charge time as latest mokee using stock cord. Haven't tried other functions yet.
---------- Post added at 06:25 AM ---------- Previous post was at 06:13 AM ----------
Check posts. I believe should work on 21 as used on 22 as I've noticed. Always make backup in TWRP and restore boot as needed.
Click to expand...
Click to collapse
Tested working fine on kiw l22 but phone heats up a little.....
Jithin0801 said:
Tested working fine on kiw l22 but phone heats up a little.....
Click to expand...
Click to collapse
That's normal. On 2.0 USB for me charging was accelerated as normal. Stock charger was same tho.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am NOT resposible for any damage done to your device, your neighbor, or any other things you like/hate.
Introduction:
This is my first kernel for any Android device. I created it because I want to get the best out of my device. It initially started with some optimizations regarding SaberMod 4.9 compatibility but I tought why not optimize it even more.
About:
This Kernel is based on the official CM12 kernel, therefore it should work with any Rom using the stock CM kernel too (Like Carbon and Liquid). I run it together with Carbon here, all tests I do will also be done using Carbon. The Kernels features will get more with time
Features and Commit History:
Check 2nd Post!
Installation Instruction:
THIS DOES ONLY WORK ON UNLOCKED BOOTLOADER!
When you're on CM/a CM based Rom:
Flash the zip file in recovery
When coming from Stock:
Flash the boot.img included in your ROMs zip file using fastboot. Flash a CM based Rom then and flash the Kernel zip file again as the Rom overrides the Kernel.
Download:
M5 Kernel (Release Versions)
https://dl.myself5.de
M5 Kernel (Test Versions)
https://testing.myself5.de
Thanks/Credits:
DooMLoRD (and therefore all guys he thanked listed below) - for a lot of Commits
FreeXperia Team (especially Jerpelea) - for too many things!
Kali- - to help get the correct dtbTool parameters for a bootable kernel
Faux123 - for lots of patches, you rock dude!
koush & all CyanogenMod maintainers - for too many things!
Dees_Troy & TeamWin - for their excellent work on TWRP Touch Recovery
Phil3759 - for his excellent work on PhilZ Touch Recovery
myfluxi - for a lot of great patches
flar2 - for a lot of great patches
dbolivar- toolchain fixes
FranciscoFranco - for Cortex-A15 optimizations, bunch of other things!
CarbonRom Team - for too many things!
vishal-android-freak - for too many things!
phaseburn - for being a good friend and helping me with almost everything !
sreinst1 - for too many things!
infected_ - for help with SM!
pec0ra - for fast_hotplug
AndroPlus - for too many things!
sparksco - for the SaberMod Toolchain
YoshiShaPow and Frap129 - for SaberNaro Toolchain
Team AOSPAL - for the Kernel Optimizations
My Big Brother Eric - for helping me keeping focused on Development!
My friends Silas and Max - for letting me use their servers and being awesome!
If I forgot you, please tell me.
If you think I deserve a donation, I won't stop you
Thanks a lot to those who have donated!
XDA:DevDB Information
M5 Kernel, Kernel for the Sony Xperia Z3
Contributors
Myself5
Source Code: https://github.com/Myself5/android_kernel_sony_msm8974/tree/cm-12.1
Kernel Special Features:
Version Information
Status: Beta
Created 2015-03-03
Last Updated 2016-07-01
Changelog
Latest Version: V11.2
Changelog:
Version 1:
Initial Z2 Release
Introduce Optimized Buildflags in order to build with SaberMod 4.9
Add Intelliplug
Add Fastcharge
Add new CPU Govs: wheatley, Smartassv2 LionHeart, Lagfree, Intelliactive
Add new I/O Sheduler BFQ, fiops, SIO
Add Faux123 Sound Control
GPU OC to 657MHz, Idle on 27MHz and add 100MHz Step
Version 1.2
Fix D2W
Add fast_hotplug CPU Hoplug
Version 2:
Implement kexec-hardboot -> this allows the usage of MultiROM
CPU OC over 2.9 GHz -> We now can OC up to 3.03GHz
Version 3:
Add CPU Govs Intellidemand, smartassH3 and adaptive
Add IO Sheds VR, ZEN, SIO-Plus and tripndroid
Add Custom Logo
Fix simple ondemand GPU Gov and add conservative
Version 4:
Add 268MHz CPU Step -> CPU can now idle on lower CPU freq and save battery
Add Alucard Hotplug and CPU Gov
Add ElementalX Gov
Revert OC Ability to 3GHz -> 3GHz was just not stable
Add KCAL support
Add F2FS Support
Initial Z3 Bringup
Version 5:
Add Bricked Hotplug
Add new CPU Govs Alucard, HYPER, OndemandPlus, Nightmare, Darkness, PegasusQ, Smartmax
Remove F2FS Support again -> Seems not to be very stable
Version 5.1:
Revert Custom Bootsplash -> together with the new Display Drivers it made the device not to boot anymore
Version 6:
Fix for Z3* Touch in MultiROM -> updated Clearpad Touch Driver
Initial Z3 Compact bringup
Version 7:
Add slim and zzmoove CPU Gov
Initial Z1 Compact bringup by @oshmoun
Enable F2FS Again
Update Alucard, Darkness and Nightmare Govs
Update BFQ I/O Shed
Update Alucard Hotplug
Rebase IntelliPlug to faux123's latest Version
Version 8:
Fixed F2FS, thanks to @Hazou
Finally implement Intelli_Termal V2, thanks to @someone755 and @oshmoun
Updated alcurd, nightmare, darkness
Version 9:
Initial Z1 bringup by @oshmoun and @Langes
Kernel Zip is now based off AnyKernel2 by @osm0sis, this allows the installation on every Rom using CM Kernel, even if it has a different Ramdisk than CM, like Mokee and Slim
Version 10:
Initial Bringup for Sony Xperia Tab Z2 (LTE and Wifi) thanks to @rcstar6696
Fix Kernel install issues with AnyKernel2
Display Kernel Version in Settings (Change Localversion from M5-Kernel to M5-Kernel-*VERSION*
Add Adreno_idler
Update zzmoove to Version 1 Beta 8
Fix a bunch of Display issues (like Black lines) on Z1C
Add mac80211 injection patch and HID patch for keyboard support
Version 10.2:
Fix Soft Reboots on rhine devices
Add Oneshot Sync
Tweak kgsl
Fix loading of LZMA Compressed Recoverys
Version 11:
Probably the last 3.4 M5 Kernel release, we will start working on M5 Kernel based on the Sony 3.10 AOSP Kernel soon.
Merge CM Upstream (Includes merge of Sony 23.4.A.1.200/23.4.A.4.6)
Fix static noise on high-end headphones
Various zRAM fixes and improvements
Merge of Linux Kernel upstream to get the kernel base to 3.4.111 (latest 3.4 Kernel available)
@tomascus rules.
Version 11.1:
Fix sound again by reverting the previous sound fixes
Version 11.2:
Recompile Kernel because thanks to the Server failure we lost some of the V11.1 builds.
All Versions since V4:
Support for LZMA compressed Recoveries like MultiROM TWRP (http://review.cyanogenmod.org/#/c/89057/)
[Only for V*-Permissive] SELinux Permissive for use with Xposed Framework (http://review.cyanogenmod.org/#/c/78551/)
All Version included the newest CM Upstream Changes from the Day they got compiled. Version which are not mentioned explicitly did only include a CM Upstream update.
For a detailed Changelog, check the Github Commit history:
Lollipop
https://github.com/Myself5/android_kernel_sony_msm8974/commits
Nice to see some kernel development going on
I'm backing up my device right now and will test your work after that.
Update:
- Boot took a while but it's all fine
- Will provide more results here in a while
- LED confirmed working now fully lit
- I think I got a random reboot while I left my Z3 in my room (if it happens again I will provide some logs etc for you to look into )
- Will do some benchmarking for the people who believe in those when I get time
- Sooo many new govenors, I'm pretty confused as I've never heard about most of them :silly:
(Google here I come ^^)
@Myself5 Is there a configuration you would suggest for daily use (music, some social networking, youtube)
lucky Z3 users .. Enjoy @Myself5's kernel
Z2 is already rocking with this kernel xD
Thanks for bringing this to our Z3, best thing you could have ever done.. Been using it ever since it was cooked into validus and been loving it ever since..
Fantastic news ! Would be great to get MultiRom Support to when possible
Sent from my Xperia Z3 using XDA Free mobile app
I definitely got a random reboot or signal loss.
I woke up my device and got the pin entry screen.
Two logs are attached as a zip (files exceed the text size limit).
Thanks for your effort.
Awesome! Thanks for you work on this kernel! It's about time to see some more cool things happening!
panzerscope said:
Fantastic news ! Would be great to get MultiRom Support to when possible
Sent from my Xperia Z3 using XDA Free mobile app
Click to expand...
Click to collapse
Already supported I just did not update the MRom post yet.
Omario-242 said:
I definitely got a random reboot or signal loss.
I woke up my device and got the pin entry screen.
Two logs are attached as a zip (files exceed the text size limit).
Thanks for your effort.
Click to expand...
Click to collapse
Thanks for the logs, I'll take a look.
squabbi said:
Awesome! Thanks for you work on this kernel! It's about time to see some more cool things happening!
Click to expand...
Click to collapse
There is defenetly some more cool stuff coming from me and some other awesome devs coming soon
Fantastic news, cant wait to get Multirom back and look forward to these other exciting features
Sent from my Xperia Z3 using XDA Free mobile app
---------- Post added at 03:31 PM ---------- Previous post was at 03:30 PM ----------
Fantastic news, cant wait to get Multirom back and look forward to these other exciting features
Will the recovery be based on TWRP ?
Sent from my Xperia Z3 using XDA Free mobile app
---------- Post added at 03:31 PM ---------- Previous post was at 03:31 PM ----------
Fantastic news, cant wait to get Multirom back and look forward to these other exciting features
Will the recovery be based on TWRP ?
Sent from my Xperia Z3 using XDA Free mobile app
---------- Post added at 03:32 PM ---------- Previous post was at 03:31 PM ----------
Fantastic news, cant wait to get Multirom back and look forward to these other exciting features
Will the recovery be based on TWRP ?
Sent from my Xperia Z3 using XDA Free mobile app
panzerscope said:
Fantastic news, cant wait to get Multirom back and look forward to these other exciting features
Sent from my Xperia Z3 using XDA Free mobile app
---------- Post added at 03:31 PM ---------- Previous post was at 03:30 PM ----------
Fantastic news, cant wait to get Multirom back and look forward to these other exciting features
Will the recovery be based on TWRP ?
Sent from my Xperia Z3 using XDA Free mobile app
Click to expand...
Click to collapse
Not sure what you are talking about. You just need to flash the Kernel, then follow the install instruction on the MRom thread. The Kernel is able to load FOTAKernel Recoverys just fine
Myself5 said:
Not sure what you are talking about. You just need to flash the Kernel, then follow the install instruction on the MRom thread. The Kernel is able to load FOTAKernel Recoverys just fine
Click to expand...
Click to collapse
I guess What I meant is where will you find the Multirom abilty ? Or do you flash the Multirom Zip in the Fota Recovery and use the Fota Recovery to flash second roms ?
Sent from my Xperia Z3 using XDA Free mobile app
panzerscope said:
I guess What I meant is where will you find the Multirom abilty ? Or do you flash the Multirom Zip in the Fota Recovery and use the Fota Recovery to flash second roms ?
Sent from my Xperia Z3 using XDA Free mobile app
Click to expand...
Click to collapse
yes, you do use the FOTARecovery, isn't that written in the Mrom OP ?
May i please request that in next build we have se to permissive instead of enforced? Thanks..
Oh lawd I've been waiting for this. Thank you myself5! Will test asap.
corpsegrinder62 said:
May i please request that in next build we have se to permissive instead of enforced? Thanks..
Click to expand...
Click to collapse
if wanted I can upload a second Version with SELinux set to permissive, did like that on the Z2 already.
Myself5 said:
if wanted I can upload a second Version with SELinux set to permissive, did like that on the Z2 already.
Click to expand...
Click to collapse
Thanks that will be appreciated if you could, i think i speak for many when i say permissive would help alot
corpsegrinder62 said:
Thanks that will be appreciated if you could, i think i speak for many when i say permissive would help alot
Click to expand...
Click to collapse
meanwhile you could do it with an init script as describet here:
http://forum.xda-developers.com/xposed/how-to-set-selinux-to-permissive-boot-t3034245/page2
su
mount -o remount,rw /system
mkdir /system/su.d
echo "#!/system/bin/sh" > /system/su.d/permissive.sh
echo "setenforce 0" > /system/su.d/permissive.sh
echo "0" > /sys/fs/selinux/enforce
chmod 755 /system/su.d/permissive.sh
Click to expand...
Click to collapse
Alex3oe said:
meanwhile you could do it with an init script as describet here:
http://forum.xda-developers.com/xposed/how-to-set-selinux-to-permissive-boot-t3034245/page2
Click to expand...
Click to collapse
Thanks, working with init.d perfectly.
The init.d script is working, but still it's only a work around
and many times (mostly after the random reboots)
somehow the permissive mode isn't set properly while booting,
so Xposed and all it's modules aren't working.
So a kernel with a permissive default mode would be awesome :good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
God's Kernel-True God Of Kernels
ABOUT God's Kernel:
AudioGod said:
God's Kernel is a open source kernel designed to unleash the power of Redmi 1S. The Aim of This project is to give a most stable ,power-full,ultra-fast kernel with Max Battery Life which is required for every Redmi 1S user.
Click to expand...
Click to collapse
DISCLAIMER:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Kernel currently supports
all KK LP MM CM AOSP and MIUI based roms
CHANGELOGS
DOWNLOAD LINKS:
GK_ARMANI_13052016_2047.zip - 6.67 MB
GK_ARMANI_MIUI_13052016_2102.zip - 7.38 MB
Older builds
INSTALLATION STEPS:
Minimum Requirements To Install God's Kernel:
Recommended Custom Recovery TWRP and a Rooted Device
Installation Procedure:
Boot Into Recovery Mode
Dirty flash the rom you are using (if needed gapps too)
Flash provide Kernel Zip
Flash UKM zip http://forum.xda-developers.com/redmi-1s/development/zip-synapse-universal-kernel-manager-r1-t3282133
Wipe Cache and Dalvik
Reboot To System
Follow Us on :
Google+
https://plus.google.com/communities/105868185017241678214
Huge Thanx to my tester :
@doylefermi
@vjraj (i still hate you for the R3 leak)
@deadpool01
@Megamite
@vedantkamlaskar
@TheStrix
n last but not the least @@Biplov Biswas
XDA:DevDB Information
[KERNEL][MM/LP/KK/MIUI][CM/AOSP][13-05-2016] God's Kernel R9, Kernel for the Xiaomi Redmi 1S
Contributors
Tarun93, fefifofum,rebelos,luffy.d, onano,Kra1o5 and all the other co devs
Source Code: https://github.com/tarunkapadia93/gk_armani/
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R9
Stable Release Date: 2016-05-13
Created 2015-10-03
Last Updated 2016-05-13
Change log:
God's Kernel-R1
Built with UBERTC 6.0 and other tweaks.
Alucard Hotplug
USB Fast Charging
Franco's Custom thermal
Faux Sound
KCAL with the latest update
Fsync Disable
DT2W
Kexec[Multi Rom Support] latest update
CPU OC to 1.7Ghz
Selinux Permanently Permissive
General Optimization & Tweaks
God's Kernel-R2
rebased on LNX.LA.3.5.2.2.2-00510-8x26.0 (Xiaomi's Official Kikat kernel)
alucard updated
powersuspend hooks fixed
added sio i/o
add intellidemand intellimm intelliactive
USB force fast charge limit raised from 1000 mA to 1500 mA
NEON optimized kernel
exFAT support
LP and KK WiFi prima drivers updated to LA.BF.1.1.1_rb1.26 from prima: update to LA.BF.1.1.1_rb21
added MIUI support
DT2W and S2W+S2S removed for this release
God's Kernel-R3
huge cleanup n patching
zzmove smartmax elementalx yankactive alucard impulse
MM compatible
interactive governor updated
i/o scheds tuned
switched from alucard to bricked hotplug
replaced franco's thermal solution to simple thermals by sultanxda
selinux will be permissive on boot but can we changed
KSM added back
removed the **** old mulitcore powersavings which never worked right xD
God's Kernel-R4
Based on the latest msm8226 Caf tags thanx to @fefifoum
added a few governors (nightmare, darkness)
added new I/O scheds (FIFO SIOPLUS TRIPDROID)
tuned all the governors n i/o for better performance n smoothness
alucard_hotplug added back and removed bricked
LMK tune up
VFS tune up
allow userspace config of simple_ondemand
Native D2W
Adreno idler
KCAL updates
freezer patches
bam_dmux patches
seccomp patches
sched patches
God's Kernel-R5
Kexec removed (its not working ATM for any armani kernel)
Thermals tuned
Flicker fix
Splash add
Unbalanced IRQ on boot fixed
Zram updates
Governors tuned
GK logo added thanx to @ramashish Mishra for providing me with the logo and the banner
God's Kernel-R6
using the latest caf tags LA.BF.1.1.3-00910-8x26.0
synced with armani-dev's latest changes
Backport Adaptive LMK from Linux 3.10
Kexec added back
features exposed to user
-gentle fair sleepers
-arch power
-fsync
-software crc
removed MC powersaver again(i never really liked it xD)
Power efficient work-queues added back
added few more wakelock fixes
a few governors added xD
added a bricked msm_hotplug intelli plug
alucard synced and merged with the last sources from alucard24
Random32 updates
Zram updates
Powersuspend removed updated to State Notifier
DT2W removed for this release
VM reclaim
High performance sound
KSM
adreno idler disabled by default (enable if you wanna save some battery)
-Ofast graphite -ffast-math and karit optimization
lots of more stuff
God's Kernel-R7
-used the latest caf tag LA.BF.1.1.3-01010-8x26.0
-GPU OC fixed
-Simple Algo for nsn_aderno_tz (disable idler if you wanna enable this)
-switched back kk touch drivers
-MIUI hardware key fixes
-Hotplug
-alucard hotplug
-msm_hotplug (enabled by default)
-Governors
-alucard
-darkness
-elementalX
-HYPER
-impulse
-nightmare
-smartmax
-yankactive
-zzmoove
-new thermal solution
-XZ compression
-huge interactive updates to match up with the latest codes
-ondemand clean up
-F2FS updated from mainline Linux 4.4
DT2W added back
fast charge clean up n simpler implementation
fixed charging issues from faced in R6
major clean ups in kernel :victory:
God's Kernel-R8
- merged the latest LA.BF.1.1.3-01210-8x26.0 caf tag
- clean up n added builtin synapse and UKM access (no more flashing UKM )
- removed interactive updates for now
- updated the governors
-thermals retuned
- lots of minor tweaks and tune ups
- f2fs fix ups
God-R9
-merged the latest LA.BF.1.1.3-01510-8x26.0 caf tag
-retuned thermals and LMK
-interactive patches updated
GET LOGS IF YOU WANNA COMPLAIN ABOUT SOMETHING OR ELSE I AINT LISTENING TO ANY THING YOU SAY
here is a thread to understand how to get them
http://forum.xda-developers.com/showthread.php?t=2185929
Another kernel :laugh: awesome!
Waiting for download links gonna try it.
Thanks man..waiting for the link to test
i am really waiting for the kernel which will unleash the power of redmi 1s like 1.8ghz oc+650mhz gpu.
thanks for your hard work. thanks for you appreciation.
really looking forward for the kernel.......... thanks alot @Tarun93 your works have been tremendous......
Small query will it be compatible with miui 7???.
slst said:
really looking forward for the kernel.......... thanks alot @Tarun93 your works have been tremendous......
Small query will it be compatible with miui 7???.
Click to expand...
Click to collapse
working on that part mate
Tarun93 said:
working on that part mate
Click to expand...
Click to collapse
one request tarun pls dont limit the charging current.its very annoying to wait for 3hrs+ to charge mobile full.if you can increase then go for it higher than 1amp
Does it support f2fs, or i have to re-format data?
Tapatalk-kal küldve az én HM 1SW-el
*brings out the grapite sheets* we need to cnc a cool case
pls use latest optimization to give more ram and less ram usage to be used by system..
another custom kernel for our little beast.
does it compatible with miui?
or only cynogen based only.
thanks
delang said:
another custom kernel for our little beast.
does it compatible with miui?
or only cynogen based only.
thanks
Click to expand...
Click to collapse
build2 will be miui supported
Great work pal. Can't wait for links to be up.
Sent from my HM 1SW using Tapatalk
@Tarun93 what app u recomend to control this kernel?
A small review about the kernel..
The kernel is performing very good considering the initial release.
Using this kernel with latest temasek ROM.
Performance is good and no lags for normal use.
Multitasking performance is also good with few hiccups here and there.
Gaming performance is good.Able to play asphalt 8 at high settings with minor or no lags at stock clock speeds.
Battery performance ..... Yet to check...will update after 2-3 cycles
The only problem is that I'm unable to set max frequency to 1689 MHz through kernel auditor app.
It is stuck at 1401 MHz.
I request @Tarun93 to look into the issue.
Keep up the gud work!!
Oops double post
UltimateBlade said:
@Tarun93 what app u recomend to control this kernel?
A small review about the kernel..
The kernel is performing very good considering the initial release.
Using this kernel with latest temasek ROM.
Performance is good and no lags for normal use.
Multitasking performance is also good with few hiccups here and there.
Gaming performance is good.Able to play asphalt 8 at high settings with minor or no lags at stock clock speeds.
Battery performance ..... Yet to check...will update after 2-3 cycles
The only problem is that I'm unable to set max frequency to 1689 MHz through kernel auditor app.
It is stuck at 1401 MHz.
I request @Tarun93 to look into the issue.
Keep up the gud work!!
Click to expand...
Click to collapse
Firstly thnx for the stats n review
For multitasking I will recommend u tune the low memory killer to aggressive or very aggressive
Use kernel auditor for all the tweaking and for people who like to tweak a step further I recommend aero kernel control but u have to add the things manually by adding the sysfs path in the misc tab
As for the freq that's a know bug in kernel auditor that sometime there is a freq glitch and if u mean it was showing the 1689 step n u set it yet it was going back to 1401 the. Pls just calm it's normal as the thermal solution is doing it's work
*EDIT*
a request to.all the users pls do not set DT2W On boot via any app it will give u a non responsive screen on boot up I will fix it in the second build with the addition. To the miui support :thumbup:
Sent from my HM 1SW using XDA mobile app
Tarun93 said:
Firstly thnx for the stats n review
For multitasking I will recommend u tune the low memory killer to aggressive or very aggressive
Use kernel auditor for all the tweaking and for people who like to tweak a step further I recommend aero kernel control but u have to add the things manually by adding the sysfs path in the misc tab
As for the freq that's a know bug in kernel auditor that sometime there is a freq glitch and if u mean it was showing the 1689 step n u set it yet it was going back to 1401 the. Pls just calm it's normal as the thermal solution is doing it's work
*EDIT*
a request to.all the users pls do not set DT2W On boot via any app it will give u a non responsive screen on boot up I will fix it in the second build with the addition. To the miui support :thumbup:
Sent from my HM 1SW using XDA mobile app
Click to expand...
Click to collapse
Thanks dude!!! I was about to report the d2w bug.And one more thing ,the phone is getting very hot while charging in switch off mode.And can u please suggest screen color cal values for more amoled like color production.
UltimateBlade said:
Thanks dude!!! I was about to report the d2w bug.And one more thing ,the phone is getting very hot while charging in switch off mode.And can u please suggest screen color cal values for more amoled like color production.
Click to expand...
Click to collapse
Which rom ???
and for me 240 245 255 works decent brightness n contrast at 130
Hi guys, I have proposed to make a kernel for the falcon and here they have it <3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshot:
Click to expand...
Click to collapse
Old builds history:
http://pastebin.com/RqyTpYna
New Build Evolution Kernel-R10 , For Nougat and Marshmallow Roms
- Linux code updated to lastest LineageOS source: 3.4.113 :good:
- Based on a new clean source for greater stability
- Compiled with latest simple GCC 4.8 (great for this) :good:
- Some optimizations for kernel compression (lzma)
- Many optimization for memory usage and reduce Lag
- Added Customs TCP
- New AsCaRex custom TCP by TeamMex Added (nice)
- Lzma compression (very nice)
- No more useless mods
- Added and improved SIO, SIOPLUS, VR, ZEN v2 I/O schedulers and default BFQ, etc...
- Row I/O scheduler is recommended by me :good:
- Added toggles for wakelocks
- MSM Hotplug stable rules (Nice deep sleep Now)
- Powersuspend updated (Use in Hybrid mode)
- Kcal v2 support
-Dt2w added but does not work for the moment (disable)
- Selinux enabled in permissive mode by default
- WQ Power Efficient tweaks
- State notifier driver added
- Lcd notify driver Removed (NO MORE START SCREEN FREEZE)
- New Governors added: zzmoove, Xperience by @TeamMex , Bioshock, Lionheart and ElementalX (testing)
- Interactive and Ondemand governor updated for better efficiency
- Added Sound Control v3.6
- Fast Charge enable by default
- Fix memory leaks for better perfomance
- Many more optimizations for performance and battery saving (check source)
- New TCP congestion driver called AsCaRex by @TeamMex Added
AsCaRex employs end-to-end bandwidth measurements to set cwnd and ssthresh after packet loss. The probing phase is as the original Reno, have a modified control mechanism for use with large congestion windows. A table indicates how much to increase the congestion window when an ACK is received.
Click to expand...
Click to collapse
[/SIZE]
Important: Use the kernel adiutor application to tune this kernel
How to install:
-Paste the zip on internal memory
-Install zip with twrp recovery
-If you use SUPERSU or Magisk, after installing my kernel install again
-Reboot and Enjoy :good:
If you like my work, contribute for more updates please:
Download:
https://www.androidfilehost.com/?fid=889764386195904758
**No mirrors please**
Suggestions for balance perfomance/battery
-Use interactive gov with hispeedfreq on 787mhz and min freq 300mhz....
-For more conservative use Bioshock or Xperience governor and min freq 300mhz
-For most battery life use zzmoove gov and select profile #2 (Some lags)
-Cpu hotplug as default msm_hotplug
-Sheduler ROW
-In misc features select suspension mode on hybrid (default) and TCP select AsCaRex or westwood
Consider please
Hi friends, I appreciate your support testing my work, If you like my kernel, contribute please, actually I'm studying at the university, I do this in my free time, I would appreciate a little help if it is at your disposal, thank you very much!
Evolution Turbo Kernel Oreo Updated
-Kernel build with QUVNTNN 6.4 2018.01 Custom ToolChain
-Improved Cortex-A7 configs
-Improved XZ kernel compression
-def_config regenerate
-Updated cpufreq and gpu drivers configs for better performance
-MSM_HOTPLUG
-Spinlocks changes
-Significant lag in oreo reduced
-Simple Adreno GPU algorithm added
-New governors distribution: Default govs, XPerience, SmartMax and BioShock govs
-All TCP cong is activated (AsCaRex default)
-Many more changes for you..
Source: https://github.com/willizambrano/android_kernel_motorola_msm8226
Download: https://androidfilehost.com/?fid=746163614322268638
How to install:
-Paste the zip on internal memory
Backup of you stock boot.img
-Install zip with twrp recovery
-Reboot and Enjoy :good:
Thanks to:
-CodeAurora
-CyanogenMod team
[email protected] for Sound Control
[email protected]
[email protected] for Kcal Screen Control
[email protected] for cherry-picks
[email protected] for cherry-picks
[email protected] Arriaga
- @TeamMex
Click to expand...
Click to collapse
XDA DevDB Information
Evolution_Kernel, Kernel for the Moto G
Contributors:
@willizambrano01
Click to expand...
Click to collapse
Sources:
https://github.com/willizambrano/android_kernel_motorola_msm8226
Click to expand...
Click to collapse
XDA:DevDB Information
Evolution Kernel unified for Oreo-MM/Nougat roms, Kernel for the Moto G 2014
Contributors
willizambrano01, willizambrano01
Source Code: https://github.com/willizambrano/android_kernel_motorola_msm8226
Kernel Special Features:
Version Information
Status: Beta
Stable Release Date: 2018-06-03
Current Beta Version: TURBO
Created 2016-12-07
Last Updated 2018-10-23
Downloaded and testing. Thank you
Good work,but its just for CM ROMs? :/
DeluxeMark said:
Good work,but its just for CM ROMs? :/
Click to expand...
Click to collapse
7.1 roms baseds on cm14.1 or aosp 7.1
willizambrano01 said:
7.1 roms baseds on cm14.1 or aosp 7.1
Click to expand...
Click to collapse
Nice! So i'll test it
Edit: When i've flashed the kernel,my superSU is gone,its normal?
And when i reflash the superSU,my sim doesnt work :/
Keep up the good work! smooth butter with RR Rom!
DeluxeMark said:
Nice! So i'll test it
Edit: When i've flashed the kernel,my superSU is gone,its normal?
And when i reflash the superSU,my sim doesnt work :/
Click to expand...
Click to collapse
It have in build root permission.. Goto developer options and activate root access for apps&adb..
.
No need to flash supersu
captian_jb said:
It have in build root permission.. Goto developer options and activate root access for apps&adb..
.
No need to flash supersu
Click to expand...
Click to collapse
Actually im using tesla N rom and it isnt pre rooted
Is this for titan?
do you have any plans on supporting GPU/CPU underclock overclock and undervolt?
DeluxeMark said:
Actually im using tesla N rom and it isnt pre rooted
Click to expand...
Click to collapse
Goto developer options find root access menu.. See the attachment...
Its not there u need SuperSU..
Otherwise activate root access for apps&adb
anybody using RR 7.1.1 ? have laggy issues?
captian_jb said:
Goto developer options find root access menu.. See the attachment...
Its not there u need SuperSU..
Otherwise activate root access for apps&adb
Click to expand...
Click to collapse
This rom isnt prerooted man
Can some1 review the battery and OS performance after using this kernel ?
New build For CM13
-Evolution CM13 - R1 - New Happy Christmas Edition
-Linux 3.4.51
-Linaro 4.9 CortexA7 optimization
-Many optimization for memory usage and reduce Lag
-Added TCP modes like westwood
-Optimized when compiling: pipeFlags, -O3, Gzip
-Added fast charge v2
- Optimized BFQ planner
-Added toggles for wakelocks (activate them with kernel adiutor)
-Advanced Intellidemand and Intelliactive Governors
-Hotplug AutoSMP added
-Powersuspend added and optimized
-Fsync enabled by default
-DT2W/S2W features
-Added Kcal v2 support
-Many more optimizations for performance and battery saving
Click to expand...
Click to collapse
Download:
https://www.androidfilehost.com/?fid=673368273298918120
**No mirrors please**
Click to expand...
Click to collapse
***Very soon update for nougat***
Waiting update for nougat !
-Evolution_N-R3 is ready (need test it, My device is a falcon and works perfectly)
-Linux 3.4.100
-Linaro 4.9 CortexA7 optimization
-Many optimization for memory usage and reduce Lag
-Added TCP modes like westwood
-Optimized when compiling: pipeFlags, -O3, Lzma compression (very nice)
-Added fast charge v2 deleted (not work correctly)
- More BFQ optimizatios
-Added toggles for wakelocks
-Hotplug MSM (Very nice)
-Powersuspend v1.5 added and optimized
-Fsync enabled by default
-SoundControl 3.5 added
-Added Kcal v2 support
-DT2W/S2W features woohooo
-Selinux enabled in permissive mode
-Many more optimizations for performance and battery saving (check source)[/QUOTE]
Download:
https://www.androidfilehost.com/?fid=529152257862690587
?? downloading !! ??
Wonderful kernel. Zero lag anywhere even on snapchat. My titan feels like a 6p lol. Thanks
EXO_K said:
Wonderful kernel. Zero lag anywhere even on snapchat. My titan feels like a 6p lol. Thanks
Click to expand...
Click to collapse
Thanks for you feedback bro, enjoy??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazySuperKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazySuperKernel over the kernel that came with your ROM!!)
Kernel tweaker app:
- CrazySuperKernel Adiutor (need download it from downloads)
Toolchain:
UBERTC 6.0 Toolchain [latest update]
CPU:
- governors:
elementalx
interactive
ondemand
zzmoove
ondemandplus
conservative
powersave
userspace
- input boost
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
siopilus
zen
vr
fifo
Thermal:
- msm thermal
Sound:
- Sound control
GPU:
- Adrenoboost
More:
- init.d support
- insecure kernel (adb has root privileges)
- PVS level info
- frandom
- notification led control
- kcal v2
- CRC Check Disabled
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Download Link CrazySuperKernel[AnyKernel]:https://www.androidfilehost.com/?w=files&flid=141438
Download Link CrazySuperKernelAdiutor[Updated]:https://www.androidfilehost.com/?w=files&flid=139961
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazySuperKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazySuperKernel !!!!
Credits
thx Eliminater74
thx Faux123
thx Savoca
thx RenderBroken
thx flar2
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazySuperKernel, Kernel for the HTC 10
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazySuperKernel-CM14.1-pme
Kernel Special Features: check the feature list
Version Information
Status: Testing
Created 2017-01-03
Last Updated 2017-01-03
FAQ
Recommended app : CrazySuperKernel Adiutor
changelogs
v1.0/02-01-17
- initial release
v2.0/04-01-17
- update toolchain to UBERTC 6.0
- sound control
- input boost
- frandom
- msm thermal
- many improvments under the hood
reserve1
reserve2
reserve3
Always great to have another choice for a kernel. May I ask whats you're goal for this? (IE battery, performance, a mix of the two? Also would you want to stay close to the stock kernel or build one using the latest kernel sources out there?)
Sent from my HTC 10 using XDA Labs
rav101 said:
Always great to have another choice for a kernel. May I ask whats you're goal for this? (IE battery, performance, a mix of the two? Also would you want to stay close to the stock kernel or build one using the latest kernel sources out there?)
Click to expand...
Click to collapse
I try to make battery friendly kernels but the user to have a chance for more performance when it need,i add just only the most important features,i m new in sd820 thats why now i make a new start coz many of my features and my own governor are not compatible yet.
CrazyGamerGR said:
I try to make battery friendly kernels but the user to have a chance for more performance when it need,i add just only the most important features,i m new in sd820 thats why now i make a new start coz many of my features and my own governor are not compatible yet.
Click to expand...
Click to collapse
Good to know buddy, great to have you on board
Sent from my HTC 10 using XDA Labs
Yesssssssssssssssssssssssssssssssssssssssss i love you
---------- Post added at 07:23 PM ---------- Previous post was at 07:12 PM ----------
CrazyGamerGR said:
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazySuperKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazySuperKernel over the kernel that came with your ROM!!)
Kernel tweaker app:
- CrazySuperKernel Adiutor (need download it from downloads)
Toolchain:
UBERTC 4.9 Toolchain [latest update]
CPU:
- governors:
elementalx
interactive
ondemand
zzmoove
ondemandplus
conservative
powersave
userspace
IO schedulers:
tripndroid
cfq
noop
deadline
fiops
row
sio
siopilus
zen
vr
fifo
GPU:
- Adrenoboost
More:
- init.d support
- insecure kernel (adb has root privileges)
- PVS level info
- kcal v2
- CRC Check Disabled
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Download Link CrazySuperKernel[AnyKernel]:https://www.androidfilehost.com/?w=files&flid=141438
Download Link CrazySuperKernelAdiutor[Updated]:https://www.androidfilehost.com/?w=files&flid=139961
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazySuperKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazySuperKernel !!!!
Credits
thx Faux123
thx Savoca
thx RenderBroken
thx flar2
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazySuperKernel, Kernel for the HTC 10
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazySuperKernel-CM14.1-pme
Kernel Special Features: check the feature list
Version Information
Status: Testing
Created 2017-01-03
Last Updated 2017-01-03
Click to expand...
Click to collapse
What is this based off of? The CM-14.1 kernel?
holofractal said:
Yesssssssssssssssssssssssssssssssssssssssss i love you
---------- Post added at 07:23 PM ---------- Previous post was at 07:12 PM ----------
What is this based off of? The CM-14.1 kernel?
Click to expand...
Click to collapse
Yeh Cm14.1/LineageOS its the same
CrazyGamerGR said:
Yeh Cm14.1/LineageOS its the same
Click to expand...
Click to collapse
Anything you can do with this?
https://github.com/LineageOS/android_kernel_htc_msm8996/tree/cm-14.1-caf
holofractal said:
Anything you can do with this?
https://github.com/LineageOS/android_kernel_htc_msm8996/tree/cm-14.1-caf
Click to expand...
Click to collapse
It is base on cm14 not caf
New update is up!
- update toolchain to UBERTC 6.0
- sound control
- input boost
- frandom
- msm thermal
- many improvments under the hood
CrazyGamerGR said:
New update is up!
- update toolchain to UBERTC 6.0
- sound control
- input boost
- frandom
- msm thermal
- many improvments under the hood
Click to expand...
Click to collapse
I flashed and got bootloop. It froze up and crashed during boot animation.
tabp0le said:
I flashed and got bootloop. It froze up and crashed during boot animation.
Click to expand...
Click to collapse
Cm14.1?
CrazyGamerGR said:
Cm14.1?
Click to expand...
Click to collapse
Yes
tabp0le said:
Yes
Click to expand...
Click to collapse
The v1.0 booted yeh?
CrazyGamerGR said:
The v1.0 booted yeh?
Click to expand...
Click to collapse
Yessir
tabp0le said:
Yessir
Click to expand...
Click to collapse
Maybe is the thermal i ll fix it,thx for feedback
CrazyGamerGR said:
Maybe is the thermal i ll fix it,thx for feedback
Click to expand...
Click to collapse
No problem!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
VARIANTS SUPPORTED:
J710F
J710FN
J710GN
J710MN
J710FQ (needs testing)
J710K (needs testing)
Just comment below if it works on those devices.
KERNEL INFORMATION
Kernel Base: J710FXXU3AQD4(Latest)
Linux Version: 3.18.36
Supports Custom Roms
FEATURES
Activated Interactive Governor
Underclocked to 343Mhz[/B]
Added a lot of CPU Governors
Disabled DM_VERITY
Disabled Forced File Encryption
Disabled TIMA
Disabled Secure Storage
Init.d Support
I/O Schedulers
Frandom
Swap with LZ4 Compression
Dynamic FSync
Powersuspend
Faster boot
Superb Battery Life
SEE CHANGELOGS FOR MORE
CPU Governors
alucard
conservative_x
darkness
despair
electrodemand
hyper
impulse
intellidemand
intellimm
ironactive
lionheart
nightmare
ondemand_x
ondemandplus
pegasusq
smartass2
zzmoove
And Many More!
CHANGELOG
TheFlash Kernel V5.0
Built from a new stable branch
Battery Life Super Awesome (Far better than stock or lazer)
Linux 3.18.36
Removed Hotplugging Drivers
Reduced RQ Lock-Contention for upto 0.7% increase in Performance
Optimized Integer SQRT. for upto 3x faster operation
Optimized Console FrameBuffer for upto 70% increase in Performance
crypto: crc32 - Add ARM64 CRC32 hw accelerated module (Improvement compared to crc32c-generic algorithm: ( TCRYPT CRC32C speed test shows ~450% speedup)
arm64: crypto: increase AES interleave to 4x
arm/arm64: crypto: boost performance
deadline: optimize for non-rotational
async i/o latency to a ssd (34% gain)
block: Disable add_random
Support for CRC-Toggle (Enabled by Default in Misc. TAB)- Disable "CRC-Check" for an improvement upto 30% faster I/O
Removed OC (It uses superior battery)
Impoved CPU volt distribution
Relaxed cpu governor
BFQ: Port BFQ-v8r10 to Android 3.18 kernel
Under Hood Changes Optimization
Better Performance
Removed Pre-Built Supersu
TheFlash Kernel V2.0
Fix ADB detection
Disabled unnecessary logcats
Fixed wifi password forget upon reboot
Busybox
crypto: crc32 - Add ARM64 CRC32 hw accelerated module (Improvement compared to crc32c-generic algorithm:
( TCRYPT CRC32C speed test shows ~450% speedup)
arm64: crypto: increase AES interleave to 4x
arm/arm64: crypto: boost performance
use more optimized nr_requests for UFS
deadline: optimize for non-rotational
async i/o latency to a ssd (34% gain)
block: Disable add_random
Support for CRC-Toggle (Enabled by Default in Misc. TAB)- Disable "CRC-Check" for an improvement upto 30% faster I/O
kernel: Reduce time to sleep
Upgraded to latest Linux 3.18.56
Built using A custom Built toolchain by @djb77 optimised for cortex_a53
Tune up for Cortex A53/ARMv8
Highly Stable
Added support for all the custom roms
Faster boot and shutdown
A lot of performance improvements
Fixed almost every bug
TheFlash Kernel V1.1
Fixed Flashlight
Should be more battery friendly now
TheFlash Kernel V1.0
Initial Build
TELEGRAM GROUP
I have a telegram group for the Kernel.
If you want you can join in the following link: [url]https://t.me/joinchat/AAAAAENIofmlAADZbAIBZQ[/URL]
USE MY FLASH KERNEL MANAGER APP TO TWEAK THE PARAMETERS
DOWNLOADS IN 2ND POST
HIT THANKS IF YOU LIKE MY WORK THIS MOTIVATES ME FOR FURTHER DEVELOPMENT
XDA:DevDB Information
TheFlash Kernel J7(6), Kernel for the Samsung Galaxy J7
Contributors
TheFlash, https://github.com/Siddhant-Naik/TheFlash-Kernel-J7-Prime/graphs/contributors
Source Code: [url]https://github.com/Siddhant-Naik/TheFlash-Kernel-J7-2016[/URL]
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 5.0
Stable Release Date: 2017-06-27
Created 2017-06-04
Last Updated 2017-06-27
DOWNLOAD
TheFlashKernel 5.0
Flash Kernel Manager
OLD VERSIONS
TheFlashKernel 2.0
TheFlashKernel 1.1(link fixed)
TheFlashKernel 1.0
Hi, do magisk work wih this kernel?
Thank you
cvo974 said:
Hi, do magisk work wih this kernel?
Thank you
Click to expand...
Click to collapse
Yes
TheFlash said:
Yes
Click to expand...
Click to collapse
Nice work hatts off
My phone stuck on boot. Is there any fix? I'm using J710GN..
After I reformat the phone, it successfully flashed but some bugs were spotted like the torch abnormally turned on and eventually it won't turn off until I reboot again the phone. Please attach the stock kernel here. Please...
Yes! another kernel dev for these variants! Not everyone can do what you people do so I thank you for your time and effort! So far a good kernel many governors to choose from and got extra performance using this kernel. Unfortunately I too am experiencing the bug same as with @knnthgngb. The torch turns on and when you try to turn it off it will only dim the torch. I found a few workarounds one is by opening the camera app the torch then should turn off. Another way is to restart the phone. Powering down the phone will not turn the torch off (haven't stuck long enough to see if it will). Thank you again and hope this info helps .
---------- Post added at 07:42 AM ---------- Previous post was at 07:31 AM ----------
knnthgngb said:
After I reformat the phone, it successfully flashed but some bugs were spotted like the torch abnormally turned on and eventually it won't turn off until I reboot again the phone. Please attach the stock kernel here. Please...
Click to expand...
Click to collapse
You can revert the stock kernel through a backup in twrp. Yun po yung ginawa ko ok na po sya. :good:
Bob The Blob said:
Yes! another kernel dev for these variants! Not everyone can do what you people do so I thank you for your time and effort! So far good kernel many governors to choose from got extra performance using these governors. Unfortunately I too am experiencing the bug @knnthgngb The torch turns on and when you try to turn it off it will only dim the torch. I found a few workarounds one is by opening the camera app the torch then should turn off. Another way is to restart the phone. Powering down the phone will not turn the torch off (haven't stuck long enough to see if it will). Thank you again and hope this info helps .
---------- Post added at 07:42 AM ---------- Previous post was at 07:31 AM ----------
You can revert the stock kernel through a backup in twrp. Yun po yung ginawa ko ok na po sya. :good:
Click to expand...
Click to collapse
I forgot to backup my kernel first so I search for a solution and I found this link, https://forum.xda-developers.com/showpost.php?p=71071663&postcount=49
Flash this via TWRP without wiping data then it will restore stock kernel. After you flash this, you will be fully unrooted but still your TWRP will not be disappear.. ?
This kernel only for stock ya customer Rom???
Rahul kumat said:
This kernel only for stock ya customer Rom???
Click to expand...
Click to collapse
Don't use this. This kernel needs improvement. Devs must test there creation first before releasing. Moderators should take an inspection on this post. @Vatsal
---------- Post added at 06:19 PM ---------- Previous post was at 06:13 PM ----------
Though I really appreciate the effort for this kernel but a slight improvement will do. Thanks.. ?
question
Rahul kumat said:
This kernel only for stock ya customer Rom???[/QUOTE
I agree with the question
Click to expand...
Click to collapse
knnthgngb said:
Don't use this. This kernel needs improvement. Devs must test there creation first before releasing. Moderators should take an inspection on this post. @Vatsal
---------- Post added at 06:19 PM ---------- Previous post was at 06:13 PM ----------
Though I really appreciate the effort for this kernel but a slight improvement will do. Thanks.. ?
Click to expand...
Click to collapse
How can u post like that the dev is working hard to get u a kernel and u complain about that
---------- Post added at 06:25 PM ---------- Previous post was at 06:25 PM ----------
galletap22 said:
Rahul kumat said:
This kernel only for stock ya customer Rom???[/QUOTE
I agree with the question
Click to expand...
Click to collapse
For both
Click to expand...
Click to collapse
Ungrateful peoples...Pity on you
CHANGELOG
TheFlash Kernel V1.1
Fixed Flashlight
Should be more battery friendly now
TheFlash said:
CHANGELOG
TheFlash Kernel V1.1
Fixed Flashlight
Should be more battery friendly now
Click to expand...
Click to collapse
Testing out.. ?
TheFlash said:
VARIANTS SUPPORTED:
J710F
J710FN
J710FQ (needs testing)
J710GN (needs testing)
J710K (needs testing)
Just comment below if it works on those devices.
KERNEL INFORMATION
Kernel Base: J710FXXU3AQD4(Latest)
Linux Version: 3.18.14
FEATURES
Activated Interactive Governor
Overclocked to 1.7 Ghz
Underclocked to 343Mhz
Added a lot of CPU Governors
Disabled DM_VERITY
Disabled Forced File Encryption
Disabled TIMA
Disabled Secure Storage
Init.d Support
I/O Schedulers
NTFS File System Support
Frandom
Swap with LZ4 Compression
Dynamic FSync
Powersuspend
A lot of performance tweaks
SEE CHANGELOGS FOR MORE
CHANGELOG
TheFlash Kernel V1.1
Fixed Flashlight
Should be more battery friendly now
TheFlash Kernel V1.0
Initial Build
TELEGRAM GROUP
I have a telegram group for the Kernel.
If you want you can join in the following link: https://t.me/joinchat/AAAAAENIofmlAADZbAIBZQ
USE MY FLASH KERNEL MANAGER APP TO TWEAK THE PARAMETERS
DOWNLOAD
TheFlashKernel 1.1(link fixed)
TheFlashKernel 1.0
Flash Kernel Manager
HIT THANKS IF YOU LIKE MY WORK
XDA:DevDB Information
TheFlash Kernel J7(6), Kernel for the Samsung Galaxy J7
Contributors
TheFlash, https://github.com/Siddhant-Naik/TheFlash-Kernel-J7-Prime/graphs/contributors
Source Code:https://github.com/Siddhant-Naik/TheFlash-Kernel-J7-2016
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2017-06-06
Created 2017-06-04
Last Updated 2017-06-06
Click to expand...
Click to collapse
Great work my friend....
Does it support loop devices?
i got bootloop on j710gn model i tried another kernel its called sidecore kernel and i got bootloop again lol sad to say i think all the kernel here are meant for j710fn/mn only not for j710gn i hope someone can fix this
jigzramirez said:
i got bootloop on j710gn model i tried another kernel its called sidecore kernel and i got bootloop again lol sad to say i think all the kernel here are meant for j710fn/mn only not for j710gn i hope someone can fix this
Click to expand...
Click to collapse
I got bootloop too on my j710fn but i try to remove battery and boot again and it turned on successful. Have you try to remove battery and see what happens?