Related
Intro: People with 2012 WFS reported to have no CWM visuals (i also do)
*NOTE: Even if you DID install this CM based rom wont work only stock based one*
CWM:
1. Unlock bootloader via HTCdev.com (look for guides there are plenty here)
2.Download http://www.mediafire.com/?pqtgftm40909r31 *updated*
3.Extract to C:/
4.Go to fastboot
4.Open Command prompt
5.type cd c:/WFS
6.type fastboot flash recovery recovery.img
7.wait for flashing to finish
8.Remove battery
9.Go to bootloader
10. click recovery wait for visuals
ROOTING:
*same as other methods*but..
1.move the cursor up then down until you see ( back button enabled)
2.Backup
3.Flash root.zip
Credits to fellow member pashaa for sharing recovery file
*NOTE* Dont blame me if anything happens to your device. I've Warned yah!
If you cant understand or want help post here and i'll try to help you out
ScreenShot of my recovery below
i dont get any visuals of black screen..just htc logo...and would you mind telling which cwm recovery version is this?? and will it work ony on this particular recovery?
vshl2995 said:
i dont get any visuals of black screen..just htc logo...and would you mind telling which cwm recovery version is this?? and will it work ony on this particular recovery?
Click to expand...
Click to collapse
modded 5.0.2.8
Sent from my Nexus 7 using xda premium
are youu sure you downloaded the recovery file correctly because it works for m
e??? all other recovery doesn't work except for that one
Sent from my Nexus 7 using xda premium
ngoralph said:
are youu sure you downloaded the recovery file correctly because it works for m
e??? all other recovery doesn't work except for that one
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
no i havent done this right now..i was asking because i tried to do the same procedure with official recovery some days ago..actually its my girlfriend's phone not mine and she is eating my head off because of low memory!!! anyway thanxx..ill try this asap and report back..!!
Link updated
Sorry for inconvenience
http://www.mediafire.com/?pqtgftm40909r31
WORKS
Works gr8...great job :good::good:
Confirmed, works here too. THX!
Thanks man,great job!.Finally I have visual recovery!Flashing ROMs or ZIPs allways conected to PC is not a pleasure!
sorinaugusto said:
Thanks man,great job!.Finally I have visual recovery!Flashing ROMs or ZIPs allways conected to PC is not a pleasure!
Click to expand...
Click to collapse
you can flash cm roms before?????
No,for my phone just Roms based on stock works.I have flashed and was working EQDKP roms,WildChild roms ,Superior sense rom,Kims mod rom.I have tried CM 7 and MIUI but did not work.But I am very interested to try CM roms or MIUI,so if you have any solutions for this please share with us.Thanks again.
cwm
I`m so Happy! It works on my wildfire s 2012! Thank you very, very much for your gift .
custom
ngoralph, i have one question - Can i flash a custom ROMs or kernels? or can i flash cyanogen any version (may be on stock kernel, if it`s possible?). Answer please, and thanks again!
Can i flash a custom ROMs or kernels? or can i flash cyanogen any version (may be on stock kernel, if it`s possible?).
Click to expand...
Click to collapse
I can answer this question: it is impossible. There are certain problems in work of this Mod. The first: does'nt making full nandroid backup. The second: does'nt flashing boot.img. It is necessary to develop this program still. But something, already is able: root, interface modding, ect....
Howdy.
I have flashed this recovery image and for the first time, can boot into recovery and see what I'm meant to see! Thanks. Previously (2012 hardware) I just hung on the white HTC logo screen.
Now, if I select backup and restore, press the power button, all the text disappears and I'm left with the central hat image... but nothing much happens. Pressing power again brings me back to the main menu. Same thing with -power off. The top option of reboot system now works just fine.
Any ideas? I'd like to backup my current system before flashing WildChild 3, you know - just in case anything goes wrong!
EDIT: immediate edit. cancel all of the above, I'm just new to recovery (obviously!). I went through the main menu a few times, it told me the back button was now active and away I go - backing up as we speak! Apologies!!! and thanks!
cwm
You must press one time into recovery volume + and several time volume - , while apear "back button is enable" and then such as in any cmw.
nitnit said:
You must press one time into recovery volume + and several time volume - , while apear "back button is enable" and then such as in any cmw.
Click to expand...
Click to collapse
i dont fully understand you but click volume up then down then up then downthenvolume up then down until back button enabled shows up
nitnit said:
ngoralph, i have one question - Can i flash a custom ROMs or kernels? or can i flash cyanogen any version (may be on stock kernel, if it`s possible?). Answer please, and thanks again!
Click to expand...
Click to collapse
haven't tried cm roms on stock kernel would anyone here like to try???
Uksus17 said:
I can answer this question: it is impossible. There are certain problems in work of this Mod. The first: does'nt making full nandroid backup. The second: does'nt flashing boot.img. It is necessary to develop this program still. But something, already is able: root, interface modding, ect....
Click to expand...
Click to collapse
agree with you here but i dont think anyone is willing and able to work on this recovery.
ngoralph said:
haven't tried cm roms on stock kernel would anyone here like to try???
Click to expand...
Click to collapse
i.m using now a custom kernel on my wfs2012 (overclocked 815 MGz) without trouble, but i can`t flash any CM roms because it hapens error Status7 in CWM. I think that this CWM is too old to flash CM ROMs. But we have no any choise
fixed, delete please.
RevokOne said:
fixed, delete please.
Click to expand...
Click to collapse
How did you fix it?
Just quickly write it down, then anyone experiencing the same problem will have the solution just a search away...
//Gunnar
GunnarKarlsson said:
How did you fix it?
Just quickly write it down, then anyone experiencing the same problem will have the solution just a search away...
//Gunnar
Click to expand...
Click to collapse
I just restarted the entire rooting process to start fresh again, did not want to try to fix it since im new to sony phones. I did lose the data I had but that's okay.
RevokOne said:
I just restarted the entire rooting process to start fresh again, did not want to try to fix it since im new to sony phones. I did lose the data I had but that's okay.
Click to expand...
Click to collapse
where did you start back from
would you mind doing a step by step-ish
i tried redo-ing the entire root but I am still stuck in the bootloop
please help.
joey7318132 said:
where did you start back from
would you mind doing a step by step-ish
i tried redo-ing the entire root but I am still stuck in the bootloop
please help.
Click to expand...
Click to collapse
I flashed the stock ftf in flashtool and restarted entire process. Does it reboot after phone loads up or during boot up? I think the new xposed update disables during safe mode(not sure what you installed) try that first and uninstall the module or xposed itself in safe mode if it fully boots up. go to power menu, long press restart and itll go to safe mode.
RevokOne said:
I flashed the stock ftf in flashtool and restarted entire process. Does it reboot after phone loads up or during boot up? I think the new xposed update disables during safe mode(not sure what you installed) try that first and uninstall the module or xposed itself in safe mode if it fully boots up. go to power menu, long press restart and itll go to safe mode.
Click to expand...
Click to collapse
howd you create the ftf file for it?
i found a website that says its the stock ftf but i cannot get flashtool to pull up my phone, much less the file (and convert it to an ftf)
email me
[email protected]
After installing installing xposed module if your phone goes into bootloop, boot into recovery, flash Xposed-Disabler-Recovery.zip automatically created by Xposed and located in the internal memory. Then reinstall Xposed and enable modules one by one to find out the bad one
Tonio78r said:
After installing installing xposed module if your phone goes into bootloop, boot into recovery, flash Xposed-Disabler-Recovery.zip automatically created by Xposed and located in the internal memory. Then reinstall Xposed and enable modules one by one to find out the bad one
Click to expand...
Click to collapse
which xposed module? and how do i get the zip onto my device it it just keeps booting and shutting off
joey7318132 said:
which xposed module? and how do i get the zip onto my device it it just keeps booting and shutting off
Click to expand...
Click to collapse
Can you boot into recovery ? when you are one sony logo the led turn green, then clic on volume up or volume down and your phone should boot into recovery mode
Tonio78r said:
Can you boot into recovery ? when you are one sony logo the led turn green, then clic on volume up or volume down and your phone should boot into recovery mode
Click to expand...
Click to collapse
yes i installed a CWM kernel and i think thats the reason i cant get out of the bootloop
the only thing i can do is go into recovery, fastboot, or flashboot
im stuck on what to do
joey7318132 said:
yes i installed a CWM kernel and i think thats the reason i cant get out of the bootloop
the only thing i can do is go into recovery, fastboot, or flashboot
im stuck on what to do
Click to expand...
Click to collapse
If think for you the best solution is to try a clean install, you will loose everything from the internal memory : download and flash one of these firmware thru flashtool --> Wipe everything
[FTF][STOCK ROM] D5503 14.3.A.0.757 Generic UK
[STOCK ROM][FTF]Xperia Z1c (D5503) 14.3.A.0.757 Generic DE unbranded (1279-6978)
Tonio78r said:
If think for you the best solution is to try a clean install, you will loose everything from the internal memory : download and flash one of these firmware thru flashtool --> Wipe everything
[FTF][STOCK ROM] D5503 14.3.A.0.757 Generic UK
[STOCK ROM][FTF]Xperia Z1c (D5503) 14.3.A.0.757 Generic DE unbranded (1279-6978)
Click to expand...
Click to collapse
i had tried this earlier but couldnt get flashtool to actually flash the ftf, it just kept saying preparing
restarted and retried several times but never worked
could it be the versoin of flashtool that im using?
Use latest version of Flashtool 0.9.16.0! Uninstall previous version before installing the lastest and if you are on WIN8 follow this too : How to install drivers on Windows 8
Plus it can take up to 5minutes for flashtool to prepare the files, depending on the hd speed.
so i reinstalled the 757.ftf using flashtool
worked like a charm on 9.16
i was running 9.10
so thanks everyone i appreciate it!
Okay so i had my p6 for around 3 months now, and i have rooted it flash quite a lot roms. But 2 weeks ago i flash b506, and it was OK, didn't like the rom, but kinda just, used it. Then today i wanted to install omni rom, i used stock recovery, and now it's stuck on 'huawei ascend' logo. And i can't update to any softare using the power + vol up + vol down. It just comes up with a fail, i can't flash any custom roms. Im pretty, screwed. Please help!
Why open new topic?.......
kabirjedi said:
Why open new topic?.......
Click to expand...
Click to collapse
Because it's very important that i get the phone fixed!
How could you flash Omni with stock recovery? You need TWRP with stock it won't work.
Gesendet von meinem P6-U06
taaeem said:
How could you flash Omni with stock recovery? You need TWRP with stock it won't work.
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
That's the problem dude! I can't do ****, now! I can't flash anything!
kamphoz said:
That's the problem dude! I can't do ****, now! I can't flash anything!
Click to expand...
Click to collapse
Try downloading stock B506 and load onto dload and reinstall it.
If that still doesn't work then try this, but I think you'll need to be in fastboot mode...
EDIT: Just follow instructions on my thread for the TWRP Installer.
Use my tool here to install twrp.
http://forum.xda-developers.com/showthread.php?t=2709607
1. Download my tool.
2. Extract.
3. Open TWRP installer. Make sure your phone is in fastboot mode.
4. Choose option 1. When it asks you which rom you use, choose 3 (skip).
5. Hold down power and vol(+) and vol (-) buttons.
6. Click wipe button in twrp. Wipe system, dalvik cache, data, cust, internal storage. Note: you will lose all your data.
7. Then go back to main menu, choose install.
8. Find your zip you put on your sd card and swipe to install.
9. Reboot and have fun with OMNI rom.
Sent from my P6-U06 using xda app-developers app
kamphoz said:
That's the problem dude! I can't do ****, now! I can't flash anything!
Click to expand...
Click to collapse
Hi !
If you already flashed B506CN, you can flash now stock recovery for B506CN , to be able to flash UPDATE.APP from/dload folder !
Put your device in bootloader mode :
> adb reboot bootloader
or
> please press and keep, at the same time : power and volume down till your device shut-down ! Now , release power button but keep pressing volume down till you see Huawei logo : Huawei Ascend ! - In this moment you are in bootloader mode, and you can flash stock recovery for B506 from here !
Good luck !
surdu_petru said:
Hi !
If you already flashed B506CN, you can flash now stock recovery for B506CN , to be able to flash UPDATE.APP from/dload folder !
Put your device in bootloader mode :
> adb reboot bootloader
or
> please press and keep, at the same time : power and volume down till your device shut-down ! Now , release power button but keep pressing volume down till you see Huawei logo : Huawei Ascend ! - In this moment you are in bootloader mode, and you can flash stock recovery for B506 from here !
Good luck !
Click to expand...
Click to collapse
bokchoi2020 said:
Try downloading stock B506 and load onto dload and reinstall it.
If that still doesn't work then try this, but I think you'll need to be in fastboot mode...
EDIT: Just follow instructions on my thread for the TWRP Installer.
Use my tool here to install twrp.
http://forum.xda-developers.com/showthread.php?t=2709607
1. Download my tool.
2. Extract.
3. Open TWRP installer. Make sure your phone is in fastboot mode.
4. Choose option 1. When it asks you which rom you use, choose 3 (skip).
5. Hold down power and vol(+) and vol (-) buttons.
6. Click wipe button in twrp. Wipe system, dalvik cache, data, cust, internal storage. Note: you will lose all your data.
7. Then go back to main menu, choose install.
8. Find your zip you put on your sd card and swipe to install.
9. Reboot and have fun with OMNI rom.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Thank you both of you! It's great to get so much help! But that's not really the problem. I am, not able to boot into bootloader, as i can't boot the phone, neither can i flash ANY Updates, using the dload, i tryed to flash omni, and pac-man, i also tryed to flash the twrp zip file, but i't won't allow me to flash anything. i will just get signature verification failed. When i use adb devices, i get "?". You guy's think theres any hope?
kamphoz said:
You guy's think theres any hope?
Click to expand...
Click to collapse
Just follow instructions from the link I gave you and you should be fine, or follow surdu's 2nd method.
Sent from my P6-U06 using xda app-developers app
kamphoz said:
Thank you both of you! It's great to get so much help! But that's not really the problem. I am, not able to boot into bootloader, as i can't boot the phone, neither can i flash ANY Updates, using the dload, i tryed to flash omni, and pac-man, i also tryed to flash the twrp zip file, but i't won't allow me to flash anything. i will just get signature verification failed. When i use adb devices, i get "?". You guy's think theres any hope?
Click to expand...
Click to collapse
Then everything is fine I think but by the way you can't never flash a custom ROM with stock recovery you need always TWRP and this you must flash in bootloader mode the ? Are all fine fastboot sees your device so you can flash a recovery.
Gesendet von meinem HUAWEI P6-C00
bokchoi2020 said:
Just follow instructions from the link I gave you and you should be fine, or follow surdu's 2nd method.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
But don't your installer need to have my phone booted?
taaeem said:
Then everything is fine I think but by the way you can't never flash a custom ROM with stock recovery you need always TWRP and this you must flash in bootloader mode the ? Are all fine fastboot sees your device so you can flash a recovery.
Gesendet von meinem HUAWEI P6-C00
Click to expand...
Click to collapse
I know. But i panicked so i just tryed, everything to save my phone really. But adb only shows "?"
kamphoz said:
I know. But i panicked so i just tryed, everything to save my phone really. But adb only shows "?"
Click to expand...
Click to collapse
Only one"?" or many if many it should be okay, if only one I don't know try to flash TWRP when it works good if not nothing is worst than now I would say.
Gesendet von meinem HUAWEI P6-C00
taaeem said:
Only one"?" or many if many it should be okay, if only one I don't know try to flash TWRP when it works good if not nothing is worst than now I would say.
Gesendet von meinem HUAWEI P6-C00
Click to expand...
Click to collapse
Its okay now ^^
ive just bought the op3.
and i want to side load the latest community build 3.5.1.
installed latest androidSDK and OP3 Drivers.
when i hit the "adb devices" command in cmd prompt window
it does not show any device...
ive searched and read in a lot of threads and forums before posting here and would appreciate any help!
im running the latest oxygenOS (no Root, Bootloader still locked)
ADB + OEM unlocking is on.
PC: Windows 8.1 x64
tnx
If ADB is enabled on device, then I can only assume that it's a driver issue.
Installed drivers properly as well, tried 2 different (op) cables...
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
arikbenami said:
Installed drivers properly as well, tried 2 different (op) cables...
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
Click to expand...
Click to collapse
Try connecting another device by USB and make sure your drivers are working and if then try adb wireless .(root) if it's working, then the problem might be with the port. Is USB working correctly in media mode?
Sent from my ONEPLUS A3003 using Tapatalk
Nexus5 working properly. Media working fine.
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
arikbenami said:
Nexus5 working properly. Media working fine.
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
Click to expand...
Click to collapse
Does fastboot working?
Sent from my ONEPLUS A3003 using Tapatalk
When you attach USB cable does device show up at all? Can you for instance access it with a pc file explorer?
I had that issue with one of my One Plus Ones. No problem with one of them but the other one wouldn't connect with adb no matter what. Fastboot devices worked but adb devices would not. I finally used an OTG cable. Loaded files onto the computer, transferred them to a flash drive, then used the flash drive and OTG cable to install them on the phone.
One person suggested an Android app which worked sort of----once. It was so much trouble I uninstalled it.
I had other issues with the OnePlus 3. TWRP would install but not stick when I rebooted. Finally fixed that with the Tookit.
Good Luck
zulu657 said:
I had that issue with one of my One Plus Ones. No problem with one of them but the other one wouldn't connect with adb no matter what. Fastboot devices worked but adb devices would not. I finally used an OTG cable. Loaded files onto the computer, transferred them to a flash drive, then used the flash drive and OTG cable to install them on the phone.
One person suggested an Android app which worked sort of----once. It was so much trouble I uninstalled it.
I had other issues with the OnePlus 3. TWRP would install but not stick when I rebooted. Finally fixed that with the Tookit.
Good Luck
Click to expand...
Click to collapse
The USB + OTG cable is a bit to advance for my skills.
But thank you for the explanation. Much appreciated.
Does anyone else have a different solution?
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
arikbenami said:
The USB + OTG cable is a bit to advance for my skills.
But thank you for the explanation. Much appreciated.
Does anyone else have a different solution?
Click to expand...
Click to collapse
Did you open cmd in the adb folder ?
Sent from my OnePlus3 using XDA Labs
zulu657 said:
I had other issues with the OnePlus 3. TWRP would install but not stick when I rebooted.
Click to expand...
Click to collapse
That's to be expected. If you install a custom recovery then reboot directly to system, the custom recovery will be overwritten by the stock one. In order to prevent this, you need to reboot into recovery right after you install it. It discusses this in the installation instructions on the official TWRP webpage for the One Plus 3:
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
fadedout said:
That's to be expected. If you install a custom recovery then reboot directly to system, the custom recovery will be overwritten by the stock one. In order to prevent this, you need to reboot into recovery right after you install it. It discusses this in the installation instructions on the official TWRP webpage for the One Plus 3:
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
Click to expand...
Click to collapse
Thank you. That's the part I didn't know. After several frustrating tries, I was finally able to fix it with the Toolkit. I generally don't use those but in this case it worked well. The toolkit had an earlier version of TWRP, so I used it to install that one. Then I booted into TWRP and replaced the earlier version with the latest one. After a reboot, no more problems.
During all of this I asked for help several times in appropriate threads with no responses......
Unofficial TWRP 3.2.0-0 Mi Note 2 (scorpio)
Unofficial TWRP build for the Mi Note 2.
TWRP 3.1.1-0 Changelog https://twrp.me/site/update/2017/05/19/twrp-3.1.1-0-released.html
Compatible with TWRP Backup and Recuse Tool for PC
Download Link
twrp-3.2.0-0-scorpio.img
Update 14/07/17
Update TWRP to 3.2.0.0
Update 14/07/17
Update TWRP to 3.1.1-0
New streamlined kernel
Add F2FS support
Improved Android 7.0 Miui compatibility - If issues persist please let me know
Update 30/05/17
All features working as expected
Screenbrightness adjustment is now responding accurately with a suitable default brightness
Updated kernel.
Much quicker booting.
Installation Guide
Once you've got you're bootloader unlocked with MiFlash and run through all the Xiaomi hoops to unlock your bootloader and have a fastboot installed on your PC:
Simply place the download where you like and then open a command prompt and type
fastboot flash recovery /path/to/twrp-3.1.1-0-scorpio.img
BONUS THEMES & File Manager
Plus as a special treat I'm including a full guide below to use Materialised Theme and Aroma File Manager both working within TWRP 3.1.1-0
Themes available from here
1. Install the latest TWRP linked above.
2. Download one of the themes above (see screenshots below for recommendations)
3. Download Aroma File Manager for TWRP from here
4. Once booted into TWRP select Install and choose the theme.zip you've downloaded.
5. You will instantly see the theme applied
6. Click Install again and this time select "materialised_aromafm_200-b7.zip"
7. Once that zip has completed installing open the Materialised Options (the art palette icon on the top right)
8. Tick the box that says "Use Aroma File Manager"
9. Press back and select "File Manager" from the list.
10. Swipe to start Aroma File Manager
11. Enjoy!!
See attached thumbnails for themes in action.
Source:
https://github.com/stonetrapping/twrp_android_device_scorpio
Special thanks to:
z31s1g for the wonderful themes and the Aroma File Manager
Thanks, dude !
Working OK for both MIUI and AOSP based ROMs?
Working with ASAP and MIUI and encryption all round.
That's great! Thanks for sharing
After flashing this recovery, it boots right back into stock recovery. Any idea what i'm doing wrong? Do I have to disable dm-verity or something?
stephendt0 said:
After flashing this recovery, it boots right back into stock recovery. Any idea what i'm doing wrong? Do I have to disable dm-verity or something?
Click to expand...
Click to collapse
You can keep dm-verity. After flashing I'd suggest leaving fastboot and booting straight into recovery via fingerpress.
Flashing SuperSU or Magisk or similar should ensure survival of TWRP if it's being overwritten.
Works great but I found :
1. Reboot to TWRP is so slowly... Why ?
2. System won't boot into TWRP when wipe everything and reboot to TWRP. I need to turn phone off and then press volume up + power button to enter TWRP again.
Is there any chance to fix those ?
Kris Chen said:
Works great but I found :
1. Reboot to TWRP is so slowly... Why ?
2. System won't boot into TWRP when wipe everything and reboot to TWRP. I need to turn phone off and then press volume up + power button to enter TWRP again.
Is there any chance to fix those ?
Click to expand...
Click to collapse
1. I've noticed the slow speed too, I'm 100% sure why it's happening but I have some ideas.
2. The same ideas will hopefully address this issue.
It was a quick and dirty port since there was no native TWRP, I haven't had the time yet to improve it but I'll build an updated release based on 8.2.5.0 sometime soon and look to making it official.
Kris Chen said:
Works great but I found :
1. Reboot to TWRP is so slowly... Why ?
2. System won't boot into TWRP when wipe everything and reboot to TWRP. I need to turn phone off and then press volume up + power button to enter TWRP again.
Is there any chance to fix those ?
Click to expand...
Click to collapse
Lastest TWRP build
https://mega.nz/#!NBwyjKrK!XELWAAwehtKnXgXOge_y16kEP0Uqscv_5LVx-YqTzcc
Boots quicker. Screen brightness is fully adjustable. Reboot to recovery from TWRP is working
Has been submitted to TeamWin for official status but for now remains unofficial.
Please let me know your thoughts.
Thanks, StoneTrapper !!
I will check later after flashing new version !
StoneTrapper said:
Lastest TWRP build
https://mega.nz/#!NBwyjKrK!XELWAAwehtKnXgXOge_y16kEP0Uqscv_5LVx-YqTzcc
Boots quicker. Screen brightness is fully adjustable. Reboot to recovery from TWRP is working
Has been submitted to TeamWin for official status but for now remains unofficial.
Please let me know your thoughts.
Click to expand...
Click to collapse
Really fast at boot, maybe because is a release from the future (30052017 )
great job, thanks man!
Can not use usb otg function ...
Can not use usb otg function ...
Otg function, no work
[email protected] said:
Can not use usb otg function ...
Otg function, no work
Click to expand...
Click to collapse
I've had no issues with USB-OTB, with any standard formatted flash drive (FAT32, NTFS, EXT4).
This is also the first I've heard of anyone having such an issue.
Does the OTG drive mount successfully in whatever ROM you're using? Is it attached prior to booting to TWRP? Can you provide additional information.
TWRP doesn't like remounting the same USB multiple times - i.e if you unplug the USB while in TWRP, and then reattach the same drive it won't remount it.
Sorry to feedback lately because I was too busy in past 2-week.
Well, new TWRP is working well.
The only one problem: If I want to upgrade firmware, TWRP will be replaced by MIUI stock recovery after flashing new version of MIUI ROM.
It's pretty annoying because I need to get into fastboot mode then flash TWRP. After that, entering TWRP and flash lineage OS ...
Is it possible to be fixed in next coming version ?
Kris
May I know how to flash the TWRP rom?
I'm on MIUI.eu ROM, can I flash full global MIUI original ROM with TWRP without bricking the phone ??
Before on Redmi note 3 u can't flash original ROM without bricking the phone, u needed special TWRP (zxc version) or modify the ROM
Can you explain me ?
Envoyé de mon Mi Note 2 en utilisant Tapatalk
Link down.
chemha said:
Link down.
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=673368273298968884
Will op fixed shortly.
StoneTrapper said:
https://www.androidfilehost.com/?fid=673368273298968884
Will op fixed shortly.
Click to expand...
Click to collapse
It does not work. No download link found