Develop Bugs

Cyanogen OS system upgrade

Hi all
My friend's wife has a swift with YOG4PAS33J and he says her notifications mention a system upgrade.
Has anyone else noticed same? I ask because https://cyngn.com/support mentiones Cyanogen OS 12.1 (5.1.1) cm-12.1-YOG4PAS33J-crackling.
Thanks

Yes I have installed the upgrade YOG7DAS2FI and now running cyanogen 12.1.1.

Yep - changelog on twitter (Wileyfox).
It seems I haven't posted enough to allow me to post links.

is a ZIP file available for flashing via TWRP?

Dior DNA said:
is a ZIP file available for flashing via TWRP?
Click to expand...
Click to collapse
Thanks to 4PDA
http://4pda.ru/forum/index.php?s=&showtopic=694867&view=findpost&p=45683960
PS Never tried.
I am using CM13 Teamasek's ROM as my daily driver

mermigas said:
Thanks to 4PDA
http://4pda.ru/forum/index.php?s=&showtopic=694867&view=findpost&p=45683960
PS Never tried.
I am using CM13 Teamasek's ROM as my daily driver
Click to expand...
Click to collapse
thanks
FYI the 4PDA is YOG7DAS2BC but above was mentioned YOG7DAS2FI

Dior DNA said:
thanks
FYI the 4PDA is YOG7DAS2BC but above was mentioned YOG7DAS2FI
Click to expand...
Click to collapse
Sorry. My Russian is not so good!!
http://4pda.ru/forum/index.php?s=&showtopic=694867&view=findpost&p=45707464

mermigas said:
Sorry. My Russian is not so good!!
http://4pda.ru/forum/index.php?s=&showtopic=694867&view=findpost&p=45707464
Click to expand...
Click to collapse
your russian seems good enough
meanwhile https://cyngn.com/support got updated

Hey, I'm new to rooting and I'm wondering how I should go about installing this update. I assume I can't just download it OTA, so what steps should I go through to install the update? Should I use the update pack from cyanogen support (can't post link)? If so, which one? cm-12.1-YOG7DAS2FI-crackling-signed-fastboot-07863145a7.zip or cm-12.1-YOG7DAS2FI-crackling-signed-81d046434c.zip? Sorry for my noobishness!

seb5049 said:
Hey, I'm new to rooting and I'm wondering how I should go about installing this update. I assume I can't just download it OTA, so what steps should I go through to install the update? Should I use the update pack from cyanogen support (can't post link)? If so, which one? cm-12.1-YOG7DAS2FI-crackling-signed-fastboot-07863145a7.zip or cm-12.1-YOG7DAS2FI-crackling-signed-81d046434c.zip? Sorry for my noobishness!
Click to expand...
Click to collapse
Is your firmware stock? Then OTA should announce itself and install fine (unless perhaps if your phone is encrypted).

Dior DNA said:
Is your firmware stock? Then OTA should announce itself and install fine (unless perhaps if your phone is encrypted).
Click to expand...
Click to collapse
I've rooted my phone using a guide on this forum. I have also installed TWRP recovery.

seb5049 said:
I've rooted my phone using a guide on this forum. I have also installed TWRP recovery.
Click to expand...
Click to collapse
OK . you can then download the official firmware and install it. When prompted by TWRP recovery to install SU chose NO.

mermigas said:
OK . you can then download the official firmware and install it. When prompted by TWRP recovery to install SU chose NO.
Click to expand...
Click to collapse
Should I install everything in the zip? Won't that wipe all of my data?

seb5049 said:
Should I install everything in the zip? Won't that wipe all of my data?
Click to expand...
Click to collapse
The cm-12.1-YOG7DAS2FI-crackling-signed-81d046434c.zip updater-script does not seem to wipe data.
You may want to wipe dalvik and /cache first though.

Dior DNA said:
The cm-12.1-YOG7DAS2FI-crackling-signed-81d046434c.zip updater-script does not seem to wipe data.
You may want to wipe dalvik and /cache first though.
Click to expand...
Click to collapse
OK, one last thing: How do I flash the zip? Can I just put it on my phone and use TWRP to install it? Or do I have to use adb? And what's dalvik?

seb5049 said:
OK, one last thing: How do I flash the zip? Can I just put it on my phone and use TWRP to install it? Or do I have to use adb? And what's dalvik?
Click to expand...
Click to collapse
You flash using TWRP. The zip can be put on sdcard (internal or external).
The dalvik cache holds some sort of compiled java code. For minor upgrades one can perhaps leave it untouched. For major upgrades one typically wipes it. It does not hurt to wipe dalvik cache. After install, it is regenerated as part of the android upgrade.
Note that stock firware is probably unrooted so you may want to reinstall supersu update zip from twrp. Also, upgrade may or may not overwrite twrp with stock recovery so you may have to reflash twrp.
I have not done the upgrade myself (I will one day, I have no Swift, a friend has one).
Success

Dior DNA said:
You flash using TWRP. The zip can be put on sdcard (internal or external).
The dalvik cache holds some sort of compiled java code. For minor upgrades one can perhaps leave it untouched. For major upgrades one typically wipes it. It does not hurt to wipe dalvik cache. After install, it is regenerated as part of the android upgrade.
Note that stock firware is probably unrooted so you may want to reinstall supersu update zip from twrp. Also, upgrade may or may not overwrite twrp with stock recovery so you may have to reflash twrp.
I have not done the upgrade myself (I will one day, I have no Swift, a friend has one).
Success
Click to expand...
Click to collapse
Ok, I flashed the update, everything works fine except that every few seconds I get a box that says "Unfortunately, Google Play Services has stopped.". Super annoying!
EDIT: Allowing wakelocks for Google Play Services in Privacy Guard fixes it.

seb5049 said:
Ok, I flashed the update, everything works fine except that every few seconds I get a box that says "Unfortunately, Google Play Services has stopped.". Super annoying!
EDIT: Allowing wakelocks for Google Play Services in Privacy Guard fixes it.
Click to expand...
Click to collapse
@seb5049
Just for my information: did you wipe dalvik-cache?
Google Play and Google Play Services typically may get updated / changed during or right after upgrade.

Dior DNA said:
@seb5049
Just for my information: did you wipe dalvik-cache?
Google Play and Google Play Services typically may get updated change during or right after upgrade.
Click to expand...
Click to collapse
Yeah, I did. By the way, I disabled the permissions again, but everything's fine now.

Xposed and January update

Hello
I flashed on my N5X stock images of January upadte and tried to root and install xposed. So i flashed franco.kernel r2, rooted systemlessly with no proble, no FCs. And then when I flashed xposed got I FCs on Calc, Downloads and Bluetooth. It'đ normal (I hope no ) Had anyone problem like me?

domicq said:
Hello
I flashed on my N5X stock images of January upadte and tried to root and install xposed. So i flashed franco.kernel r2, rooted systemlessly with no proble, no FCs. And then when I flashed xposed got I FCs on Calc, Downloads and Bluetooth. It'đ normal (I hope no ) Had anyone problem like me?
Click to expand...
Click to collapse
For me xposed is a hit and miss. But I blame the modules more then xposed itself. It always boot up fine by itself. I guess it is just the modules that needs to be made working better with 6.0.1
Clearing cashe fixes the boot loop i get stuck in some times. Other times I need to disable the xposed conf file. and it boots up again with no active modules.
No FC.

frewys said:
For me xposed is a hit and miss. But I blame the modules more then xposed itself. It always boot up fine by itself. I guess it is just the modules that needs to be made working better with 6.0.1
Clearing cashe fixes the boot loop i get stuck in some times. Other times I need to disable the xposed conf file. and it boots up again with no active modules.
No FC.
Click to expand...
Click to collapse
I just installed Xposed, without any module active and i have those FCs.

domicq said:
I just installed Xposed, without any module active and i have those FCs.
Click to expand...
Click to collapse
I am running stock with no FC.
Make a clean redo.
Preferably flash the clean install straight from google with all the right updated radio and vendor etc and try again.

frewys said:
I am running stock with no FC.
Make a clean redo.
Preferably flash the clean install straight from google with all the right updated radio and vendor etc and try again.
Click to expand...
Click to collapse
I do clean install two times have you encrytped data?

domicq said:
I do clean install two times have you encrytped data?
Click to expand...
Click to collapse
Not encrypted. But I think it should work anyway.
Try without.
Are you flashing through ADB or through recovery?

frewys said:
Not encrypted. But I think it should work anyway.
Try without.
Are you flashing through ADB or through recovery?
Click to expand...
Click to collapse
Rom through fastboot, anything else through recovery.
Gesendet von meinem Nexus 5X mit Tapatalk

N5X encrypted running the latest image + xposed v79. No issues at all. I would advise clearing cache/dalvik via recovery to force recompiling of the apps.

Calculator was crashing for me, so I believe I finally just deleted it from /system/app, reinstalled it, and it's been fine ever since.

C3C076 said:
N5X encrypted running the latest image + xposed v79. No issues at all. I would advise clearing cache/dalvik via recovery to force recompiling of the apps.
Click to expand...
Click to collapse
Omg man! i was clearing cache and dalvik but before installing xposed, i was stupid. nvm. thank you:good:

need help installing xposed on marshmallow v30d

As the title states i am rooted with twrp installed on marshmallow stock rom. I would like to install xposed framework. Is it possible? I really like the stock interface + it has the best battery life surprisingly. So if i can get it on stock it would be really helpful. Thanks in advance.

Well thats a bummer

amk837 said:
As the title states i am rooted with twrp installed on marshmallow stock rom. I would like to install xposed framework. Is it possible? I really like the stock interface + it has the best battery life surprisingly. So if i can get it on stock it would be really helpful. Thanks in advance.
Click to expand...
Click to collapse
yes, I just did this. in android, uninstall everything you have related to xposed then do the following:
in recovery, make a backup
in recovery install the xposed uninstaller: http://dl-xda.xposed.info/framework/uninstaller/xposed-uninstaller-20150831-arm.zip
clear dalvik cache
in revocery install this: http://dl-xda.xposed.info/framework/sdk23/arm/xposed-v86-sdk23-arm.zip
reboot
in android install this: http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
reboot

jdmst77 said:
yes, I just did this. in android, uninstall everything you have related to xposed then do the following:
in recovery, make a backup
in recovery install the xposed uninstaller: http://dl-xda.xposed.info/framework/uninstaller/xposed-uninstaller-20150831-arm.zip
clear dalvik cache
in revocery install this: http://dl-xda.xposed.info/framework/sdk23/arm/xposed-v86-sdk23-arm.zip
reboot
in android install this: http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
reboot
Click to expand...
Click to collapse
Thanks man

jdmst77 said:
yes, I just did this. in android, uninstall everything you have related to xposed then do the following:
in recovery, make a backup
in recovery install the xposed uninstaller: http://dl-xda.xposed.info/framework/uninstaller/xposed-uninstaller-20150831-arm.zip
clear dalvik cache
in revocery install this: http://dl-xda.xposed.info/framework/sdk23/arm/xposed-v86-sdk23-arm.zip
reboot
in android install this: http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
reboot
Click to expand...
Click to collapse
The link in step 7 is no longer working. Any idea of what I'm looking for?

Braaainz said:
The link in step 7 is no longer working. Any idea of what I'm looking for?
Click to expand...
Click to collapse
I'm assuming that you mean in step 6...
I'd check the Xposed threads because I believe that there's an Xposed Manager that can be used to install Xposed now. I'm currently on 30G on one of my devices and RR ROM on the other.
processes are a little different in later releases and other ROMs. I can't even use SuperSu anymore or the old methods of installing Xposed

Magisk on Verizon Note 4

Hello everyone,
As I'm sure everyone knows, Niantic has blocked rooted phones from playing with the most current update 0.37. I'm wondering if anyone has been able to find a ROM that will work on our phones and we can install magisk to be able to play with the latest update. If not, is there any other possible solution to play with the use of magisk or without giving up root completely. I'm currently running PaulPizz and have not tried any of the possible methods I have found from fear of losing root permanently. I'm open to any suggestions or ideas.
Thank you.

Try going to the Samsung Note 4 international section.. I just flashed a Note 7 port to my wife's phone and it rocks..

Could you possibly link to which one? Is it this one? Xerrum525 N7 FullFramework PortedRom for SM-N910C / SM-N910H
Also did you use magisk with it to use pokemon go?

Tricil said:
Hello everyone,
As I'm sure everyone knows, Niantic has blocked rooted phones from playing with the most current update 0.37. I'm wondering if anyone has been able to find a ROM that will work on our phones and we can install magisk to be able to play with the latest update. If not, is there any other possible solution to play with the use of magisk or without giving up root completely. I'm currently running PaulPizz and have not tried any of the possible methods I have found from fear of losing root permanently. I'm open to any suggestions or ideas.
Thank you.
Click to expand...
Click to collapse
I'd like to know too.
What I did was install PaulPizz. Once it finished I deleted the SuperSU folder via TWRP.
It booted up fine, I still had the SU app in my drawer, I did full unroot via SU. I then flashed the uninstall for Xposed and now I can play pogo.
I Haven't been able to get Magisk to work... I get unable to detect boot image. I'm unrooted for now on PaulPizz and can play PoGo 0.37

Tricil said:
Hello everyone,
As I'm sure everyone knows, Niantic has blocked rooted phones from playing with the most current update 0.37. I'm wondering if anyone has been able to find a ROM that will work on our phones and we can install magisk to be able to play with the latest update. If not, is there any other possible solution to play with the use of magisk or without giving up root completely. I'm currently running PaulPizz and have not tried any of the possible methods I have found from fear of losing root permanently. I'm open to any suggestions or ideas.
Thank you.
Click to expand...
Click to collapse
I downloaded an older version of the app from http://www.apkmirror.com/apk/niantic-inc/pokemon-go/.
I uninstalled the new version. Reinstalled the older. Ran fine. I've heard they'll force an update sooner or later but its good for now.
I also made sure to turn off auto app updated in settings.

I did find a solution using PaulPizz and magisk. It relatively follows most other tutorials. Plus I found a way to toggle magisk with tasker, if anyone is interested. I'll post a step by step tomorrow or possibly later tonight. Sorry to make everyone wait.

So this is how I got it work with PaulPizz ROM for Verizon Note 4 retail converted to Dev edition.
I take no credit for the creation of the files required for this install, but I kind of muttled my way through this installation and got the files from different posts so credit is to go to the creators of these files, I am just redistributing. If someone feels the need to take credit for these please feel free to let me know.
Make sure to download all apks and zips before and place on sd card before hand to save time. I have also included the uninstaller for magisk version of xposed if you would like, do not use this one during the installation of magisk to remove xposed though.
Only flash xposed and install apk if you still want xposed, if not you can skip those files.
1. Do a full backup of phone using TWRP
2. Go into SuperSU settings and do full unroot
3. Reboot into recovery and mount system partion
4. Go to advanced in recovery and select File explorer
5. Navigate to system and delete .supersu file
6. Flash xposed-uninstaller-20150831-arm.zip and reboot system
7. Install pokemon go 0.37 and make sure it works at this point
8. Reboot into recovery again and flash Magisk-v6.zip, 1473968610260_phh-superuser-17-magisk.zip, and 1473980489208_xposed-v86.5-arm-alt-sdk23-topjohnwu.zip
9. Clear dalvik and cache and reboot system
10. After apps optimize install Magisk manager and Xposed Installer
11. Reboot and enjoy playing the new update. Just use Magisk Manager to turn root on/off at will before or after playing.
I'm going to create the tasker profile tomorrow and post instruction on that once completed to automatically activate Magisk when opening pokemon go.
If there are any questions, I will do my best to answer.

Tricil said:
So this is how I got it work with PaulPizz ROM for Verizon Note 4 retail converted to Dev edition.
I take no credit for the creation of the files required for this install, but I kind of muttled my way through this installation and got the files from different posts so credit is to go to the creators of these files, I am just redistributing. If someone feels the need to take credit for these please feel free to let me know.
Make sure to download all apks and zips before and place on sd card before hand to save time. I have also included the uninstaller for magisk version of xposed if you would like, do not use this one during the installation of magisk to remove xposed though.
Only flash xposed and install apk if you still want xposed, if not you can skip those files.
1. Do a full backup of phone using TWRP
2. Go into SuperSU settings and do full unroot
3. Reboot into recovery and mount system partion
4. Go to advanced in recovery and select File explorer
5. Navigate to system and delete .supersu file
6. Flash xposed-uninstaller-20150831-arm.zip and reboot system
7. Install pokemon go 0.37 and make sure it works at this point
8. Reboot into recovery again and flash Magisk-v6.zip, 1473968610260_phh-superuser-17-magisk.zip, and 1473980489208_xposed-v86.5-arm-alt-sdk23-topjohnwu.zip
9. Clear dalvik and cache and reboot system
10. After apps optimize install Magisk manager and Xposed Installer
11. Reboot and enjoy playing the new update. Just use Magisk Manager to turn root on/off at will before or after playing.
I'm going to create the tasker profile tomorrow and post instruction on that once completed to automatically activate Magisk when opening pokemon go.
If there are any questions, I will do my best to answer.
Click to expand...
Click to collapse
I still get unable to detect boot image :/

reggaeton1991 said:
I still get unable to detect boot image :/
Click to expand...
Click to collapse
When are you getting that, when you flash the zip or install the apk? I'm guessing that's when you flash the included Magisk_6.zip. You are rooted using the retail to dev on an N910V model? I would maybe backup your current system and restore from before you unrooted and try again possibly.

Tricil said:
When are you getting that, when you flash the zip or install the apk? I'm guessing that's when you flash the included Magisk_6.zip. You are rooted using the retail to dev on an N910V model? I would maybe backup your current system and restore from before you unrooted and try again possibly.
Click to expand...
Click to collapse
Yes rooted from retaill to dev on a N910V and yea, I get that when flashing Magisk_6.zip.
I'm factory resetting the rom. Going to ensure I have root from PaulPizz. and then try again. Thank you.

reggaeton1991 said:
Yes rooted from retaill to dev on a N910V and yea, I get that when flashing Magisk_6.zip.
I'm factory resetting the rom. Going to ensure I have root from PaulPizz. and then try again. Thank you.
Click to expand...
Click to collapse
After clean install (wipe data, cache, system)
It says after mounting system
Mounting /system(ro), /cache, data
Device platform arm
unable to detect boot image
error 1
idk what to do

reggaeton1991 said:
I still get unable to detect boot image :/
Click to expand...
Click to collapse
reggaeton1991 said:
Yes rooted from retaill to dev on a N910V and yea, I get that when flashing Magisk_6.zip.
I'm factory resetting the rom. Going to ensure I have root from PaulPizz. and then try again. Thank you.
Click to expand...
Click to collapse
Also, this is my setup, if it helps at all. Please let me know if any of this helps, or if you find another way that works for you. Thank you.

Tricil said:
Also, this is my setup, if it helps at all. Please let me know if any of this helps, or if you find another way that works for you. Thank you.
Click to expand...
Click to collapse
Thanks again, it looks like the only difference was that I was on CPF3.r-2.
I tried going back to CPD1 and still no luck.
I appreciate you letting me know.

I used the Kyubi rom and uninstalled root with supersu and installed all of the magisk stuff and it works like a charm. All of the xposed modules work good too with the system less xposed. It takes a while to boot up after flashing magisk and clearing cache but worth it. The buddy system is pretty cool lol

Anyone else only able to MAYBE play on WiFi?

Tricil said:
So this is how I got it work with PaulPizz ROM for Verizon Note 4 retail converted to Dev edition.
I take no credit for the creation of the files required for this install, but I kind of muttled my way through this installation and got the files from different posts so credit is to go to the creators of these files, I am just redistributing. If someone feels the need to take credit for these please feel free to let me know.
Make sure to download all apks and zips before and place on sd card before hand to save time. I have also included the uninstaller for magisk version of xposed if you would like, do not use this one during the installation of magisk to remove xposed though.
Only flash xposed and install apk if you still want xposed, if not you can skip those files.
1. Do a full backup of phone using TWRP
2. Go into SuperSU settings and do full unroot
3. Reboot into recovery and mount system partion
4. Go to advanced in recovery and select File explorer
5. Navigate to system and delete .supersu file
6. Flash xposed-uninstaller-20150831-arm.zip and reboot system
7. Install pokemon go 0.37 and make sure it works at this point
8. Reboot into recovery again and flash Magisk-v6.zip, 1473968610260_phh-superuser-17-magisk.zip, and 1473980489208_xposed-v86.5-arm-alt-sdk23-topjohnwu.zip
9. Clear dalvik and cache and reboot system
10. After apps optimize install Magisk manager and Xposed Installer
11. Reboot and enjoy playing the new update. Just use Magisk Manager to turn root on/off at will before or after playing.
I'm going to create the tasker profile tomorrow and post instruction on that once completed to automatically activate Magisk when opening pokemon go.
If there are any questions, I will do my best to answer.
Click to expand...
Click to collapse
Well I have magisk installed but I dont know if the xposed went through entirely it says it flashed ok but according to the installer I don't have xposed installed? What's going on did I do something wrong

Did you remove the old xposed app after the flag and install the new xposed apk also? I think mine did the same, because I forgot to also install the xposed app after flashing the systemless xposed framework.

I was able to full unroot, delete the super su file in twrp. when I flash the Xposed uninstaller it removes the framework but leaves the APk in a form that I can't delete.
If I flash magisk and all the other stuff it goes through fine, but when I try to toggle root off in magisk it turns itself back on within a few seconds. I'm assuming this is because i didn't get Xposed all the way off?
Any ideas? Thanks in advance for the help.

Magisk will refuse to unroot while xposed is still there in the system form. Even a piece of it.

Well now I got Xposed off using tibu before I unroot. Everything installed, systemless Xposed registered as being active, but when I try to toggle root in magisk I get the same thing with it turning itself back on. If I try to request root privileges from an app I am told i have no root.
Ideas?

Uninstall Root on Cm13?

I want to use the system less root so I can play Pokémon Go. Is there a way to remove root or do I have to be running a stock rom? I'm using the latest nightly of the regular Cyanogen Cm13.
Thanks

Isn't root enabled via settings? Maybe turn it off in the settings or reflash and don't enable root?

I tried that but the system is still seen as rooted
Sent from my SGH-T999 using XDA-Developers mobile app

Shack70 said:
I want to use the system less root so I can play Pokémon Go. Is there a way to remove root or do I have to be running a stock rom? I'm using the latest nightly of the regular Cyanogen Cm13.
Thanks
Click to expand...
Click to collapse
in superSU app , under settings is a clickable box for "full unroot". tried that?
"err on the side of kindness"

mrrocketdog said:
in superSU app , under settings is a clickable box for "full unroot". tried that?
"err on the side of kindness"
Click to expand...
Click to collapse
I can't get the supersu app to work. It wants to update and fails update. Updating through twrp creates a boot loop. Good idea though, thanks.
Sent from my SGH-T999 using XDA-Developers mobile app

Shack70 said:
I can't get the supersu app to work. It wants to update and fails update. Updating through twrp creates a boot loop. Good idea though, thanks.
Sent from my SGH-T999 using XDA-Developers mobile app
Click to expand...
Click to collapse
hmmmmm well just for something to try , how about reflasing superSU then see if it will open. idk. just something to try
"err on the side of kindness"

CM13 has it's own baked-in implementation of ClockWorkMod's SuperUser, not SuperSU. You can install SuperSU, but it will conflict. You'll first need to delete /system/bin/su and /system/xbin/su, then you can "try" installing SuperSU, SUHide, etc..
1. install the latest version of TWRP for your device
2. boot into recovery and install SuperSU v2.78 SR1
-reboot system. open SuperSU and setup as normal
3. boot into recovery and install SUHide v0.54
-reboot system. open an app that require root to make sure your root is functioning
-try Pokemon Go. It should work fine
Do you need some sort of GPS spoof? You'll need Systemless XPosed and a good module
4. boot into recovery and install Xposed v86.2 - Universal Systemless (make sure you select 86.2 - you DO NOT need Magisk)
reboot system.
5. install Material Design Xposed Installer APK
-run XPosed Installer. it should show you are using 86.2 systemless
-click top left button and select download. search for a module called "Snorlax" and install the most recent version.
-this will hide your mock locations setting as well as show IV's, movesets, etc. of any Pokemon you encounter. it's all client side so no worries about bans!
-reboot system
-Test Pokemon Go. You should have no problems!
6. Need a GPS spoofing app? I use Fake GPS (well worth the $2.99). It allows you to pin favorite locations (I bounce quickly between spots where I can hit multiple lured PokeStops at once), and has settings to randomly move within a radius at whatever intervals and speed. They also have a GPS Joystick and Routes app that I have not yet tested since they don't offer a trial or free version. I'll update on that if they do offer a trial.
I have fresh installed CM13 on a Nexus 5, following the instructions above for systemless root + xposed. Pokemon Go v39.1 works without issue while spoofing GPS.
**UPDATE 10/7/2016 ** - edited to use updated suhide v0.54

FuNKSioN said:
CM13 has it's own baked-in implementation of ClockWorkMod's SuperUser, not SuperSU. You can install SuperSU, but it will conflict. You'll first need to delete /system/bin/su and /system/xbin/su, then you can "try" installing SuperSU, SUHide, etc..
1. install the latest version of TWRP for your device
2. boot into recovery and install SuperSU v2.78 SR1
-reboot system. open SuperSU and setup as normal
3. boot into recovery and install suhide v0.53
-reboot system. open an app that require root to make sure your root is functioning
-try Pokemon Go. It should work fine
Do you need some sort of GPS spoof? You'll need Systemless XPosed and a good module
4. boot into recovery and install Xposed v86.2 - Universal Systemless (make sure you select 86.2 - you DO NOT need Magisk)
reboot system.
5. install Material Design Xposed Installer APK
-run XPosed Installer. it should show you are using 86.2 systemless
-click top left button and select download. search for a module called "Snorlax" and install the most recent version.
-this will spoof your mock locations setting as well as show IV's, movesets, etc. of any Pokemon you encounter. it's all client side so no worries about bans!
-reboot system
Test Pokemon Go. You should have no problems!
***UPDATE***
I have just fresh installed CM13 on a Nexus 5, following the instructions above for systemless root + xposed. Pokemon Go v39.1 works without issue while spoofing GPS.
Click to expand...
Click to collapse
I deleted all the support files but Pokémon ends telling it's unable to log me in. Many users are reporting this error. It might just be my phone, the s3 is kinda old.

Shack70 said:
I deleted all the support files but Pokémon ends telling it's unable to log me in. Many users are reporting this error. It might just be my phone, the s3 is kinda old.
Click to expand...
Click to collapse
Hmm.. For ****s and giggles, I'll pull out an old S3 and give it a go. Will report back soon.

FuNKSioN said:
Hmm.. For ****s and giggles, I'll pull out an old S3 and give it a go. Will report back soon.
Click to expand...
Click to collapse
Wow! Thanks I appreciate it.

Shack70 said:
Wow! Thanks I appreciate it.
Click to expand...
Click to collapse
Sorry took so long. This phone is slow as ballz! Everything appears to be working correctly though. I have Pokemon Go 39.1 installed (had to use apkmirror to install since it wouldn't let me from the Play Store on the S3), and am using Snorlax module to hide mock locations. I'm also using Fake Gps to spoof location.
I'd say it should work for you as well. What modules are you using? If you don't care about anything on your phone, wipe everything from recovery. Then under advanced, adb sideload CM13 and GApps Nano from opengapps.org (ARM/6.0/nano). Restart system and follow all the steps from there after you have the initial phone setup done.

FuNKSioN said:
Sorry took so long. This phone is slow as ballz! Everything appears to be working correctly though. I have Pokemon Go 39.1 installed (had to use apkmirror to install since it wouldn't let me from the Play Store on the S3), and am using Snorlax module to hide mock locations. I'm also using Fake Gps to spoof location.
I'd say it should work for you as well. What modules are you using? If you don't care about anything on your phone, wipe everything from recovery. Then under advanced, adb sideload CM13 and GApps Nano from opengapps.org (ARM/6.0/nano). Restart system and follow all the steps from there after you have the initial phone setup done.
Click to expand...
Click to collapse
Thanks for your help. I updated yo the newest nightly build, did a full factory reset and deleted the 2 su files. After rebooting i re-downloaded the newest version of Pokémon and installed it. Game is working fine.
I don't use root much so I'll see how it goes without root and if I need root i can put the su files back(I made copies and put them in Dropbox) or try superSU/hideSU.
I know the s3 is slow but I'm putting off an upgrade until i have to upgrade. Until i upgrade I won't really realize how slow my phone is
Sent from my SGH-T999 using XDA-Developers mobile app

Going forward, I don't think the CM baked-in SuperUser is going to cut it. At least not the version in CM13. The specific versions of SuperSU + suhide I linked seem to pass all current checks though. So if you want root, go ahead and use them.

FuNKSioN said:
Going forward, I don't think the CM baked-in SuperUser is going to cut it. At least not the version in CM13. The specific versions of SuperSU + suhide I linked seem to pass all current checks though. So if you want root, go ahead and use them.
Click to expand...
Click to collapse
Yeah i get this is a temporary solution. Thanks for all your help. You've really gone above and beyond
Sent from my SGH-T999 using XDA-Developers mobile app

no problem man!

Thanks!
FuNKSioN said:
no problem man!
Click to expand...
Click to collapse
just wanted to chime in and say my own SGH-T999 is now running PG again, thanks to you FuNKSioN - so, thank you sir!!! wasted a LOT of time trying other solutions (mainly Magisk) with no luck, so i was pretty damned happy when your steps worked. first time i forgot to rename/delete the two su files, second time i did it immediately after flashing CM13 & GApps using ADB and then everything was fine. you rock!!! :victory:
and also, yeah - until Shack70 and i get a new phone, we have no idea what "slow as ballz" is! i will say, the S3 may be relatively slow but i have two backup batteries that take up very little space and are very easy to swap in and out.

romehu2 said:
just wanted to chime in and say my own SGH-T999 is now running PG again, thanks to you FuNKSioN - so, thank you sir!!! wasted a LOT of time trying other solutions (mainly Magisk) with no luck, so i was pretty damned happy when your steps worked. first time i forgot to rename/delete the two su files, second time i did it immediately after flashing CM13 & GApps using ADB and then everything was fine. you rock!!! :victory:
and also, yeah - until Shack70 and i get a new phone, we have no idea what "slow as ballz" is! i will say, the S3 may be relatively slow but i have two backup batteries that take up very little space and are very easy to swap in and out.
Click to expand...
Click to collapse
Glad to help. I was in the same boat: so much info in all directions and none of it seemed to work. I keep up with ChainFire's G+ account. He had a few posts linked directly back to XDA. Those few posts had everything needed. I just put it in simple steps. All thanks to him really

Sigh
And now SafetyNet is failing and PoGo won't log me in. Is this really worth it?

romehu2 said:
And now SafetyNet is failing and PoGo won't log me in. Is this really worth it?
Click to expand...
Click to collapse
reflashed CM13 + GApps, used ADB to rename system/xbin/su & system/bin/su to /su-off, and SafetyNet is happy (and thus, so is PoGo). but now, of course, phone isn't rooted.
---------- Post added at 05:18 AM ---------- Previous post was at 05:05 AM ----------
on the plus side, CM13 comes with File Manager which allowed me, without root, to install the v39.1 PoGo apk that I downloaded last week.

Sit back and wait for an SU update... It's only been a hot minute.