Develop Bugs

[Guide] From a (soft) Brick to a Marshmallow (Taiwan 6.0.1)

How to fully fix au Japanese HTC Butterfly 3 with Taiwan’s ROM
[ROM verified working in US on all gsm networks and Europe (other networks may place sim lock ie. Middle East, South America)]
**Read over entire guide before starting**
**I am not responsible for any damage done to your phone. (Guide is basically without flaw, but still)**
**It is recommended you leave sim card out until point you stop, turn off phone, insert, then reboot.**
Shout out to mars3712 for uploading the file images check him out and donate:
https://www.androidfilehost.com/?w=profile&uid=24052804347819348
and another shout out to moizjazz for helping me diagnose my problem that many have been experiencing (banner error due to CID and MID[this prevents HTC updates from installing and/or installing zips])
Pre-req.s htc drivers and adb 1.3 drivers
1. Enable adb debugging on phone
2. Download this file and unzip: https://drive.google.com/file/d/0BwjkdhnznIw6THQxdHFIcWUxRms/view?usp=sharing
3. add this zip with it and unzip contents into same directory https://www.androidfilehost.com/?fid=24352994023706379
4. hold shift and then right click blank space in folder and select open command window here
5. Type: adb reboot download
6. Type: fastboot oem get_identifier_token
7. Right click terminal and left click and hold from First "<" to last ">"
8. Press enter, paste into wordpad or text editor
9. Delete all <bootloader> s and space afterwards
10. Log into www.htcdev.com
11. Copy the token to http://www.htcdev.com/bootloader/unlock-instructions/page-2
12. Proceed with instructions until you get the email.
13. Download Unlock_code.bin and put it with all other files (in b3twrp)
14. Type into terminal Fastboot flash unlocktoken Unlockcode.bin
15. You will be prompted to allow unlock, with volume rocker move to yes and press power button
16. During reboot hold all three buttons and when phone shuts off let go of vol+
17. You will be in download mode again
18. Type these commands
a. Fastboot flash boot boot.img
b. Fastboot flash recovery recovery.img
c. Fastboot flash system system.img
d. Fastboot oem writecid HTC__621
e. fastboot oem writemid 0PL220000
[Good time to make twrp backup on SD card]
[You can stop here if you are content with lollipop; skip to bottom for gps fix]
f. fastboot oem lock
19. Reboot and upgrade to marshmallow without dealing with banner errors and RUU
At this point the Tiawan rom has two software malfunctions, no gps and no nfc, however, there is a patch you can flash for gps
Marshmallow update has gps fixed and nfc detected, but unusable.
-video- https://www.youtube.com/watch?v=LEAH...SD4YsS3P4WqrPA
-Straight up link- http://1drv.ms/1nKdi4e
This dude is awesome for having the gps fix, like his video.
P.S. There is now a way to root or add xposed installer to Marshmallow because twrp 3.0 for recovery has been made for this device running marshmallow
[Edit]: Now there is twrp!!!!! (see bottom!!!!)
**I have tested this method twice and confirmed that even with some updated download mode firmware, updates will always be possible**
*This method rocks!*
Also (to end this goose chase), if any of you want the zips for some reason, here are the links to the best servers:
Japan: https://www.androidfilehost.com/?fid=24052804347822774 Credit goes to - Krocko
Taiwan: https://www.androidfilehost.com/?fid=24352994023706373 Credit goes to- mars3712
Big ANNOUNCEMENT! An actual twrp recovery image has been compiled and uploaded!(In china)
Here's my reuploaded copy! (Won't take 10 minutes to download) Thanks to mrquyen1993 for sharing this update and a HUGE thanks to... I actually dont know...
https://drive.google.com/file/d/0B6qqU5WVQ2khMVRMSUhOUWY3WU0/view?usp=sharing
Phone, SMS, and data work perfectly! I had issues with sms due to damaged SIM card(weirdest thing ever).
Hello, I believe a simlock solution has been found. add attached misc.img to your b3 adb directory and open terminal and enter command fastboot flash misc misc.img in bootloader mode. If that doesn't work try it in download mode. I can't test if this is a successful fix or not because I didn't have this problem.

So when I flash this rom, I will get a completely clean rom with no bloatware, root and TWRP?
And if I have root I can use your method to be able to text again?

Twrp is still only flashable to recovery and and all gsm cell service works, but other than that you're correct. These are the stock flashable images. (You need to decompress the file)
Sent from my HTC_B830x using XDA-Developers mobile app

Works like a charm, thanks a lot!

So if I follow your steps, I can convert my Japan version to Taiwan version? Does NFC and GPS work?

Can you post a copy of your updated boot.img somehow?

NP. Srry I Just saw this now.
[deleted]

Half correct
frosticfire said:
So if I follow your steps, I can convert my Japan version to Taiwan version? Does NFC and GPS work?
Click to expand...
Click to collapse
Only gps will work and you have to follow the bottom link. Follow the instructions.txt in the zip.

Sim card problem
My phone keeps showing "SIM network subset unlock PIN" , it reboots after i entered the pin, it goes back to the same page after it reboots. Any solutions?
This only happens when there's a SIM card being inserted.

Troubleshooting
bernard090 said:
My phone keeps showing "SIM network subset unlock PIN" , it reboots after i entered the pin, it goes back to the same page after it reboots. Any solutions?
This only happens when there's a SIM card being inserted.
Click to expand...
Click to collapse
Have you tried:
-soft factory reset(in settings)
-factory reset and/or wiping cache in download mode
-factory reset and/or wiping cache in recovery
-wiping system, data, and cache in twrp prior to flashing boot, recovery, and system
-reverting to backup
-trying simlock toggle in recovery/weird mode with vol+ and power on boot
-Checking sim support/trying different sim
These are steps I would take (in the order least to most in depth[not this order])
Sounds like a problem with your sim card from your specific provider. The phone with Tiawan has an international apn-configs.xml

TWRP for B3 By BOA ai-dev
Tutorial Chinese
TWRP-Recovery Rom taiwan
TWRP-Recovery Rom Japan
Rom stock B3 HTV31 Au ver 1.11.970.0 - new
Boa rom cook pay
After updating Marshmallow , you do not need to fix gps.
Sorry, my english very bad
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bug:
1. NFC.
2. Power.

This is some awesome stuff!
mrquyen1993 said:
TWRP for B3 By BOA ai-dev
Tutorial Chinese
TWRP-Recovery Rom taiwan
TWRP-Recovery Rom Japan
Rom stock B3 HTV31 Au ver 1.11.970.0 - new
Boa rom cook pay
After updating Marshmallow , you do not need to fix gps.
Sorry, my english very bad
Bug:
1. NFC.
2. Power.
Click to expand...
Click to collapse
I'm going to test these files!
[Edit] I have now confirmed twrp works. If you can, please have the creator make a thread in android development!

@ boa19861105
http://forum.xda-developers.com/member.php?u=1580110
Sent from my HTC_B830x using XDA-Developers mobile app

Birkyjon said:
Have you tried:
-soft factory reset(in settings)
-factory reset and/or wiping cache in download mode
-factory reset and/or wiping cache in recovery
-wiping system, data, and cache in twrp prior to flashing boot, recovery, and system
-reverting to backup
-trying simlock toggle in recovery/weird mode with vol+ and power on boot
-Checking sim support/trying different sim
These are steps I would take (in the order least to most in depth[not this order])
Sounds like a problem with your sim card from your specific provider. The phone with Tiawan has an international apn-configs.xml
Click to expand...
Click to collapse
I've tried every single method you have listed but to no avail, any other suggestions?

Butterfly 3 android 6 sense 8
https://m.facebook.com/story.php?story_fbid=1083701208319409&id=241474159208789
Sent from my HTC_B830x using XDA-Developers mobile app

So... will SMS Work?
Hi, the whole reason to do this for me is to get SMS working in the UK on this phone. Will this fix it? Also will this root the phone, as the KLGadget guy on Youtube seems to think that you can flash the Taiwan Rom without Root, but I have had no luck (keeps saying SC CARD NOT MOUNTED when I try his method) thanks.

nickbarr said:
Hi, the whole reason to do this for me is to get SMS working in the UK on this phone. Will this fix it? Also will this root the phone, as the KLGadget guy on Youtube seems to think that you can flash the Taiwan Rom without Root, but I have had no luck (keeps saying SC CARD NOT MOUNTED when I try his method) thanks.
Click to expand...
Click to collapse
you should have a PC, Laptop and follow my instructions.
however I write in Vietnamese, you can use gg translate
Link
Sorry my english very bad

mrquyen1993 said:
you should have a PC, Laptop and follow my instructions.
however I write in Vietnamese, you can use gg translate
Link
Sorry my english very bad
Click to expand...
Click to collapse
Thanks, but I am not sure you have answered my questions.

Rom stock taiwan can fix sms,
I use adb to flash rom, it should not need sd

mrquyen1993 said:
Rom stock taiwan can fix sms,
I use adb to flash rom, it should not need sd
Click to expand...
Click to collapse
thanks. I will follow the original instructions.

HwOTA8 for Huawei P20 Lite

HwOTA8 for Huawei P20 Lite​1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
and will be repack firmware automatically!
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA_ANE.zip
Short video tutorial for upgrade of any version authorized or unauthorized in phone P10 Lite Thanks @Alexxxx1
HwOTA8 method for rollback from EMUI 8 to Emui 5 - Huawei P10 lite Thanks @Alexxxx1
If you like my work, you can thank TeamMT PayPal
PPS: Sorry for my English!!!

Thanks to share your work

if i run the update.bat. After the first question "Relock Bootloader" and i press 2. it just closes and does nothing.
I did the rename etc..
I dont have to store the files on the phone right?
edit.
nvm i missread your instructions.

Sorry i got another question and i couldnt find something on google.
I dont have my unlock code anymore. So i cant use youre CMD.
Is there a way to find my code? I did not found anything on my Huawei ID account center

vovan1982 said:
HwOTA8 for Huawei P20 Lite​1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
and will be repack firmware automatically!
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA_ANE.zip
Short video tutorial for upgrade of any version authorized or unauthorized in phone P10 Lite Thanks @Alexxxx1
HwOTA8 method for rollback from EMUI 8 to Emui 5 - Huawei P10 lite Thanks @Alexxxx1
If you like my work, you can thank TeamMT PayPal
PPS: Sorry for my English!!!
Click to expand...
Click to collapse
HI,
I tried this but the bat file has only two options..
1. lock boot loader again
2. Not to lock the bootloader
if I choose 1, it just locks bootloader rebooting to fastboot etc..etc..
If I choose 2, the app closes..
How to make the rebrand or change firmware using this tool ??
Thanks in advance.

anuj0sharma said:
HI,
I tried this but the bat file has only two options..
1. lock boot loader again
2. Not to lock the bootloader
if I choose 1, it just locks bootloader rebooting to fastboot etc..etc..
If I choose 2, the app closes..
How to make the rebrand or change firmware using this tool ??
Thanks in advance.
Click to expand...
Click to collapse
I was fixed the bug.

vovan1982 said:
I was fixed the bug.
Click to expand...
Click to collapse
Software install failed!
Failed to check the update package.
Please diwnload the package again.
Happened second times. First i've changed country code, then try to install firmware. Error on 50%. What i can do? Stock erecovery don't see any updates, only bootloops.

nyph10ke said:
Software install failed!
Failed to check the update package.
Please diwnload the package again.
Happened second times. First i've changed country code, then try to install firmware. Error on 50%. What i can do? Stock erecovery don't see any updates, only bootloops.
Click to expand...
Click to collapse
+1

Hello.
Someone can confirm that this script actually work?
Thanks
Trimis de pe al meu ANE-LX1 folosind Tapatalk

shecky said:
Hello.
Someone can confirm that this script actually work?
Thanks
Trimis de pe al meu ANE-LX1 folosind Tapatalk
Click to expand...
Click to collapse
Hi,
the script doesn't work, the phone can't reboot into twrp mode until i remove the usb cable from computer when i put the usb cable again nothing is happen and i don't have the upgrade options.

Thank you for sharing.
So the developer should update the procedure how to do it.
Trimis de pe al meu ANE-LX1 folosind Tapatalk

zammelovski said:
Hi,
the script doesn't work, the phone can't reboot into twrp mode until i remove the usb cable from computer when i put the usb cable again nothing is happen and i don't have the upgrade options.
Click to expand...
Click to collapse
Confirm it working! Dead ANE-LX1 from C10 (RU) to C432 (EU) and update to 8.0.0.126
First flash oeminfo, then stock rom (All this by HwOTA8). Then use Firmware Finder with DNS changer included in to Multi-Tool 8 to install last update applied to your country-code in oeminfo.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Can you detailed more? After changing oeminfo from C55 to the C432 the phone make a full erase and the script stop because is asking for twrp in order to continue. I made this and very hard I make it to work again with a problem at the firmware version.
Now mine is 8.0.0.0. 46 (0ASV) wtf??
Trimis de pe al meu ANE-LX1 folosind Tapatalk

shecky said:
Can you detailed more? After changing oeminfo from C55 to the C432 the phone make a full erase and the script stop because is asking for twrp in order to continue. I made this and very hard I make it to work again with a problem at the firmware version.
Now mine is 8.0.0.0. 46 (0ASV) wtf??
Trimis de pe al meu ANE-LX1 folosind Tapatalk
Click to expand...
Click to collapse
The same happens here, C109 and then 8.0.0.0. 46 (0ADF) ??

And by the way the second imei is showing 00000000000000.
At least it's working with one Sim card.
But how you did it?
Where I'm wrong?
Trimis de pe al meu ANE-LX1 folosind Tapatalk

shecky said:
Can you detailed more? After changing oeminfo from C55 to the C432 the phone make a full erase and the script stop because is asking for twrp in order to continue. I made this and very hard I make it to work again with a problem at the firmware version.
Now mine is 8.0.0.0. 46 (0ASV) wtf??
Trimis de pe al meu ANE-LX1 folosind Tapatalk
Click to expand...
Click to collapse
Just flash it again. If error at 60-70 % try flash without main zip, just with lx1/l21 zip and third , forge how it must be named, typing from phone. Of And this doors not work, then check country code. If changed (if u change it ofc) try firm finder + hisuite with DNS patch applied (can find in multi tool 8)

Ive just tried to use the HWOTA8 to update my P20 lite from C782 to C432.
Whilst it was a complete ball ache, Ive now ended up with a P20 lite C432 dual sim and everything working which is great
The HWOTA8 doesn't fully work, you can get the files to repack, change the names, but it falls down once it flashes the temporary TWRP, it wont reboot into TWRP. you need to open a second cmd prompt and reboot the phone whilst unplugging the usb lead and pressing volume up to enter TWRP.
Once there i was able to flash the new OEMINFO which went okay, but again it wouldn't reboot out of TWRP so it couldn't carry on with the firmware update.
I rebooted the phone and got similar software versions to above ending 46
In developer options OEM unlock disappeared and wasn't showing in bootloader, only phone unlocked.
I then restarted HWOTA8 and tried to bypass the install part and try and install the firmware update but that also went through okay but failed about 75%
Restarted the phone back into the normal system
I downloaded the firmware finder app and manually added the the correct customer version i tried to install, as the app recognised this 46 number
The firmware was downloaded via proxy and passed all the checks and installed correctly this time. went through okay and now the phone recognises it a c432 as i wanted and no longer c782 or 46.
The only strange bit was that after the firmware was updated, frp lock in the bootloader disappeared, for this to re appear again i had to relock the bootloader to get it to show back up again. i then proceed to unlock again and it still stayed this time.
Ive checked everything and everything is working okay now, Dual sim shows but even with second sim is inserted it shows all 00000000000. but the sim works fine and makes and receives calls as well as first sim
hope this helps anyone else before using this method you can make it work but it aint as easy as following the prompts.

Hi Daniel.
I downloaded via proxy with app finder (directly in the phone) firmware ANE-LX1 C432B126 but how to install it? Isn't showing nothing to update.

shecky said:
Hi Daniel.
I downloaded via proxy with app finder (directly in the phone) firmware ANE-LX1 C432B126 but how to install it? Isn't showing nothing to update.
Click to expand...
Click to collapse
Hello
If you download with firmware finder via in app proxy,
once youve modified your wifi settings to localhost port 8080
go into your system update and check for an update, once its downloaded it will reboot automatically into recovery and update for you.
you dont install anything your self. the system does it all for you.

Has worked with methode of fabio87.
Thanks man. Now i want to have original recovery image instead of twrp.
which image should i write from update.app?

TWRP Recovery For Asus Zenfone Lite L1 (ZA551KL)

Presenting the TWRP Recovery for Asus Zenfone Lite L1 (ZA551KL) (asus_x00r)(Treble Supported)(Encryption Fixed) ​Disclaimer : I am not responsible for any bricked device, all responsibility bears the user.​
First Unlock Boot-loader using official asus ubl tool - Download UBL App
Team Win Recovery Project (TWRP) is the most famous custom recovery used by the people who like to flash custom roms, patches, flashable zips etc. The latest version is TWRP 3.2.3-0.
Flash zips through otg or Micro sd Cards as device is encrypted , if you format data and decry-pt then the Flashlight (torch) and the Camera will not Work.ENCRYPTION IS FIXED NOW
Installation By PC
1. Install fastboot tools - minimal adb and fastboot
2. Download twrp image and rename it as "twrp.img", then copy it to the Minimal ADB and Fastboot folder
3. Boot the device to fastboot mode - press and hold power button and volume down button
4. Connect device to pc
5. Open command prompt from Minimal ADB and Fastboot
6. Run command " fastboot flash recovery twrp.img "
7. Twrp will be flashed immediately
8. To boot in to twrp run " fastboot boot twrp.img " or disconnect device from pc and press and hold power button and volume up button
9. Device will be booted to twrp
NOW LETS DECRY-PT DATA
*Download the data Decrypt patch Zip :- Download
*Put it in otg (pendrive) or microsd card
*Then in twrp , Go to wipe section in twrp and tap on Format data (Important )
*Do not wipe data partiton , you have to format it
*then flash the Decrypt zip from your sdcard or pendrive
*after flashing wipe caches
*then reboot , and see camera and flashlight is working and Storage in Decrypted
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Join telegram group for updates​
Downloads:-
1. Minimal Fastboot and Adb
2.TWRP_3.2.3.0_asus_lite_l1
3. Decrypt Patch Download
Device tree
Credits:
@Ashish Gupta1999 (me)
Tester - for testing a lot of builds time to time
if you like my work you can donate me also

Dose it support g cam portrait mode

Yes works fantastic(front cam)

Doesn't work for me. Anyone have a working root method for Asus zenfone live L1?

dexx121 said:
Doesn't work for me. Anyone have a working root method for Asus zenfone live L1?
Click to expand...
Click to collapse
Live l1 and lite l1 is a completely different devices

This TWRP actually partially works for Live L1 (ZA550KL, SD425). The problems are 1) it can't decrypt /data, 2) it fails to mount /xrom (which is inexistent on the Go variant) and 3) no ADB/MTP, but for flashing ROMs/addons, backing up and restoring, it works nicely. Just letting y'all know about it.

AndyYan said:
This TWRP actually partially works for Live L1 (ZA550KL, SD425). The problems are 1) it can't decrypt /data, 2) it fails to mount /xrom (which is inexistent on the Go variant) and 3) no ADB/MTP, but for flashing ROMs/addons, backing up and restoring, it works nicely. Just letting y'all know about it.
Click to expand...
Click to collapse
there is a specific twrp for live l1

Ashish Gupta1999 said:
there is a specific twrp for live l1
Click to expand...
Click to collapse
Can you link me to the one you know of? I just found another one from TWRP Builder, and it did fix most problems, but I still can't use decrypted data (shows "encryption unsuccessful" on boot). And it doesn't expose /vendor either which is a small letdown. <- Fixed by unpacking and editing recovery.fstab.

AndyYan said:
Can you link me to the one you know of? I just found another one from TWRP Builder, and it did fix most problems, but I still can't use decrypted data (shows "encryption unsuccessful" on boot). And it doesn't expose /vendor either which is a small letdown. <- Fixed by unpacking and editing recovery.fstab.
Click to expand...
Click to collapse
Contact me on telegram @yoursenpai1 i will provide you there

it works

Ashish Gupta1999 said:
Contact me on telegram @yoursenpai1 i will provide you there
Click to expand...
Click to collapse
Something gone wrong. System in boot loop. Able to load TWRP through PC. Tried to flash a new ROM but only 2 options (Boot & Recovery) available. Please help

Abhicr said:
Something gone wrong. System in boot loop. Able to load TWRP through PC. Tried to flash a new ROM but only 2 options (Boot & Recovery) available. Please help
Click to expand...
Click to collapse
All I know there is no rom for this device as of now , if you flash a gsi , it. Will definitely show system image option , for now flash stock rom using stock recovery to unbrick

Ashish Gupta1999 said:
All I know there is no rom for this device as of now , if you flash a gsi , it. Will definitely show system image option , for now flash stock rom using stock recovery to unbrick
Click to expand...
Click to collapse
I used a GSI to update from Oreo to Pie. But the TWRP has only 2 options (boot & Recovery) to flash the .img file. However, I did a restore & back with the old Oreo. I want to upgrade my Asus Lite 1 to Pie!! Is there any possibility to get the mobile back to the factory state including recovery? So, that I can begin from one.

Abhicr said:
I used a GSI to update from Oreo to Pie. But the TWRP has only 2 options (boot & Recovery) to flash the .img file. However, I did a restore & back with the old Oreo. I want to upgrade my Asus Lite 1 to Pie!! Is there any possibility to get the mobile back to the factory state including recovery? So, that I can begin from one.
Click to expand...
Click to collapse
Well there is a fastboot rom available in my telegram channel of lite l1 check in there

Accidentally deleted the OS and now the mobile isn't even switching on. Any solution for this? Anyway I can install an OS ?

My mobile is ASUS Zenfone Lite L1.

Unroot and relock bootloader Asus Zenfone Max Pro M2

Disclaimer :
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed.
If you point the finger at me for messing up your device, I will laugh at you. Hard. A lot​
<Device will be formatted, so keep a backup >
Requirements :
Unofficially unlocked, Rooted Asus Zenfone Max Pro M2 with TWRP installed
Windows / Linux
Instructions :
//relocking
- Download the latest OTA firmware from Asus official website [turn off your VPN and head to asus.com > Products > Phones > Zenfone Max > Zenfone Max Pro (M2) > SUPPORT > Drivers and tools > Bios and Firmware ]
- Extract the firmware zip and go to > META-INF > com > google > android
- open updater-script with a note editor preferably notepad++
- Remove all the lines (assert/abort lines) above the code
Code:
ui_print("Target: Android/sdm660_64/sdm660_64:X.X.X/XXXX/XX.20XX.XXXX.XXX-20XXXXXX:user/release-keys");
You should be very carefull that you downloaded the correct(sku) firmware for your device, else doing this might brick your device
- Save it, rezip the firmware and copy it to sdcard
- Download and extract "Relock" zip
- Copy stockrecovery.img to sdcard
- Go to "adb + asus drivers" folder and install ADB and necessary drivers
- Flash TWRP, if you are on any other recovery
- Boot into recovery > install > flash the firmware zip
- Reboot to recovery, if custom recovery comes again, install > image file > stockrecovery.img > as recovery > flash > Reboot to bootloader
- Go to "relock" folder, open an elevated command prompt (admin) and enter :
Code:
fastboot devices
(device should be listed)
now execute relock_bl.cmd (windows) or ./relock.sh (linux)
Device will boot up without unlocked bootloader warning.
To check if bootloader is locked, go to fastboot and enter :
Code:
fastboot oem device-info
Thats it, bootloader relocked!
Credits
@Sudeep Duhoon
@legacy07
Downloads:
Relocker
TWRP

Was wondering if it is possible to not have that "bootloader is been unlocked" or something warning while booting the phone. I remember it was possible on Zenfone 2 by flashing some splash.img

Instead of newness trying to edit the firmware and end up in bricking their phone, one of you experts can edit the Indian version firmware zip and upload in any of the mirrors ...

arth_vish said:
Instead of newness trying to edit the firmware and end up in bricking their phone, one of you experts can edit the Indian version firmware zip and upload in any of the mirrors ...
Click to expand...
Click to collapse
Xda is all about learning all the best :good:

Has any Indian user successfully unofficially unlocked bootloader and relocked it.
Please Confirm

sachinm said:
Has any Indian user successfully unofficially unlocked bootloader and relocked it.
Please Confirm
Click to expand...
Click to collapse
Yes

as right now, only firmware for India SKU is released on official Asus website.
I wonder when will Asus push FOTA for another country

Is this work with another Sku or only indian?

Aljavary said:
Is this work with another Sku or only indian?
Click to expand...
Click to collapse
The method will work but you will need the stock rom for your region.

relock.sh for linux system. Just put it in relock folder and Rename relock.txt to relock.sh then run(sudo ./relock.sh) through the terminal(sudo chmod -R +777 relock.sh ===> run this before running relock.sh). Say thanks if you want.

hello, can anyone here please post the link of this "latest OTA firmware from Asus official website"? i have unlocked my phone unofficially and now wants to relock it. but cant find that official ota link. thanks.
my current firmware is OPM1.WW_Phone-15.2016.1812.179-20181227

Farhadul Haque said:
hello, can anyone here please post the link of this "latest OTA firmware from Asus official website"? i have unlocked my phone unofficially and now wants to relock it. but cant find that official ota link. thanks.
my current firmware is OPM1.WW_Phone-15.2016.1812.179-20181227
Click to expand...
Click to collapse
Go to asus.com > Products > Phones > Zenfone Max > Zenfone Max Pro (M2) > SUPPORT > Drivers and tools > Bios and Firmware
There you could find your firmware

#ArtFuL said:
Go to asus.com > Products > Phones > Zenfone Max > Zenfone Max Pro (M2) > SUPPORT > Drivers and tools > Bios and Firmware
There you could find your firmware
Click to expand...
Click to collapse
i already checked there. but its empty. there is no firmware file there at present. how did u guys download the firmware? there is nothing on that page.

Farhadul Haque said:
i already checked there. but its empty. there is no firmware file there at present. how did u guys download the firmware? there is nothing on that page.
Click to expand...
Click to collapse
Well, then Asus hasn't released the firmware for your country. Wait for it.

#ArtFuL said:
Well, then Asus hasn't released the firmware for your country. Wait for it.
Click to expand...
Click to collapse
oh ok, thank u. i have an international version.

edit; wrong thread sorry

vjbenn said:
hello thanks for tutorial
I following every step until unlocking bootloader (I dont know how to check it if my bootloader unlock properly?)
Then when installing twrp, this command appear
Code:
sending 'recovery' (59492 KB)...
FAILED (remote: Requested download size is more than max allowed
anyone facing this issue? how to solve it? thanks
Click to expand...
Click to collapse
This can happen if
1. Your adb drivers are not properly installed. You might need to reinstall the drivers
2. Bootloader may not be unlocked properly
3. You may not be flashing the right recovery file

#ArtFuL said:
This can happen if
1. Your adb drivers are not properly installed. You might need to reinstall the drivers
2. Bootloader may not be unlocked properly
3. You may not be flashing the right recovery file
Click to expand...
Click to collapse
I realized post at wrong thread :silly:
I never had issue before with another phone. try restart my PC, uninstall reinstall driver, try all my USB port, change USB cables, still didn't make it. Seems Google can't help me
And this happen if I type on cmd "fastboot devices" and then "fastboot flash recovery blabla.img"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm on Windows 10 x64 + latest update from Asus + official unlock bootloader

when i want to flash there a error notif "updater process ended with error:7 error installing zip file" bla bla bla, what should i do to fix it?

Aljavary said:
when i want to flash there a error notif "updater process ended with error:7 error installing zip file" bla bla bla, what should i do to fix it?
Click to expand...
Click to collapse
Inside the zip go to meta inf and open updater script and remove the lines starting with assert and abort at the beginning and save it.

AOSP 10 (QUACK) Treble Official ROM by phhusson. (Huawei Mediapad M5 lite Global)

Requirements:
1. Unlocked Bootloader
2. You need ramdisk of current version
3. Download Stock Firmware Online firmware database ⋆ TEAM MT Developers
4. Look for the brand and model and download the update.zip
5. Use the Huawei Extractor to extract the ramdisk.img
6. Zip looks like this "http://update.dbankcdn.com/TDS/data/files/px/sxx/Gxxx/gxxx/vxxxxx/f1/full/update.zip"
7. Download TWRP and Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip from here.
8. AOSP 10.0 ROM from here
Instructions:
1.. Check correct version and download stock firmware and extract RAMDISK.img accordingly from above.
2.. copy Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip on SD card
3. Boot into Fastboot Mode.
Fastboot:
4.. Flash TWRP -> fastboot flash recovery_ramdisk twrp8.img
5.. fastboot reboot recovery (the first time booting should show up the twrp menu)
if the boot message "2. Press Volume up for 3 seconds" appears must do a Factory Reset in the Stock Recovery. After a reboot the TWRP menu shows up. You can activate advanced reboot in developer settings to boot in TWRP menu by pressing recovery mode
TWRP:
6. Wipe -> Advanced Wipe -> select data + cache + dalvik-cache -> Swipe to wipe -> back to start menu
7. Install -> Select Storage -> select Mircro SD card -> OK -> select Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip -> Swipe to confirm Flash
8. Reboot -> Bootloader (not System!!!)
Fastboot:
9. fastboot flash ramdisk RAMDISK.img
10. fastboot flash system system-quack-arm64-aonly-gapps.img
11. fastboot reboot
If you get stuck in a bootloop while it boots, go backin TWRP and format your data. Boot again.
Features:
Gapps included, pre installed Root by SU, Dark Mode, Substratum works like charm. Fingerprint works.
Bugs:
No Bugs
IMPORTANT Note :
To use fast charging enable it in Settings -> Phh Treble Setting -> Huawei features -> Huawei fast charge -> Mid-fast
To fix display blur enable it in Settings -> Phh Treble Setting -> Huawei features -> Enable blurry UI workaround

Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

sadiqkarur said:
Requirements:
1. Unlocked Bootloader
2. You need ramdisk of current version
3. Download Stock Firmware Online firmware database ⋆ TEAM MT Developers
4. Look for the brand and model and download the update.zip
5. Use the Huawei Extractor to extract the ramdisk.img
6. Zip looks like this "http://update.dbankcdn.com/TDS/data/files/px/sxx/Gxxx/gxxx/vxxxxx/f1/full/update.zip"
7. Download TWRP and Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip from here.
8. AOSP 10.0 ROM from here
Instructions:
1.. Check correct version and download stock firmware and extract RAMDISK.img accordingly from above.
2.. copy Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip on SD card
3. Boot into Fastboot Mode.
Fastboot:
4.. Flash TWRP -> fastboot flash recovery_ramdisk twrp8.img
5.. fastboot reboot recovery (the first time booting should show up the twrp menu)
if the boot message "2. Press Volume up for 3 seconds" appears must do a Factory Reset in the Stock Recovery. After a reboot the TWRP menu shows up. You can activate advanced reboot in developer settings to boot in TWRP menu by pressing recovery mode
TWRP:
6. Wipe -> Advanced Wipe -> select data + cache + dalvik-cache -> Swipe to wipe -> back to start menu
7. Install -> Select Storage -> select Mircro SD card -> OK -> select Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip -> Swipe to confirm Flash
8. Reboot -> Bootloader (not System!!!)
Fastboot:
9. fastboot flash ramdisk RAMDISK.img
10. fastboot flash system system-quack-arm64-aonly-gapps.img
(or AOSP 10.0 v209)
11. fastboot reboot
If you get stuck in a bootloop while it boots, go backin TWRP and format your data. Boot again.
Features:
Gapps included, pre installed Root by SU, Dark Mode, Substratum works like charm.
Bugs:
Fingerprint issue.
Click to expand...
Click to collapse
Additional option to point 5:
If your stock rom or custom rom starts you can boot into twrp by typing adb reboot revovery
Be sure your device is autohorized like this:
c:\adb>adb devices
List of devices attached
82xyzabc device

Is it normal that in the screenshots, the icons are pixelized? And what was your tablet model ? Mine is c431b239.

sasuke988 said:
Is it normal that in the screenshots, the icons are pixelized? And what was your tablet model ? Mine is c431b239.
Click to expand...
Click to collapse
Yes, it is normal in screenshots and my model is bah2-l09c636
This method works on everymodel

1. Unlocked Bootloader
2. You need ramdisk of current version
3. Download Stock Firmware Online firmware database ⋆ TEAM MT Developers
4. Look for the brand and model and download the update.zip
5. Use the Huawei Extractor to extract the ramdisk.img
6. Zip looks like this "http://update.dbankcdn.com/TDS/data/files/px/sxx/Gxxx/gxxx/vxxxxx/f1/full/update.zip" ==> I can't extract ramdisk.img from update.zip. I have this error:

alex_37_Spain said:
1. Unlocked Bootloader
2. You need ramdisk of current version
3. Download Stock Firmware Online firmware database ⋆ TEAM MT Developers
4. Look for the brand and model and download the update.zip
5. Use the Huawei Extractor to extract the ramdisk.img
6. Zip looks like this "http://update.dbankcdn.com/TDS/data/files/px/sxx/Gxxx/gxxx/vxxxxx/f1/full/update.zip" ==> I can't extract ramdisk.img from update.zip. I have this error:
Click to expand...
Click to collapse
In the huawei extractor tool go to settings and uncheck 1. Verify header checksum
2. Verify file checksum

Thank you!!!!!! I will try it when I am at home. I am very excited about to change my MediaPad m5 lite rom

Is it compatible with m5 lite 8"?

Olexander said:
Is it compatible with m5 lite 8"?
Click to expand...
Click to collapse
the twrp probably not, but you can try.
May be this will help https://www.filehosting.org/file/details/764535/twrp-kirin.img

Any feedback about this rom? Any bug?

I am scared to try this ROM without reports.....

I tried it. Everything but sound worked. (BT sound worked, but speakers not)

It is a shame that Huawei has not upgraded this tablet...... Huawei: never again

hello developer.
my device model is BAH2-L09.
and CPU using Hisilcon Kirin 659.
if i download this ROM and install, that is work..?
sorry for question .... T^T;

@sadiqkarur
any updates on this ROM?
fingerprint reader and speakers are working now?

sakis_the_fraud said:
@sadiqkarur
any updates on this ROM?
fingerprint reader and speakers are working now?
Click to expand...
Click to collapse
Everything Fixed. download new update

kulio97 said:
hello developer.
my device model is BAH2-L09.
and CPU using Hisilcon Kirin 659.
if i download this ROM and install, that is work..?
sorry for question .... T^T;
Click to expand...
Click to collapse
yes will work

Hi there. I'm looking at one of these tablets as a replacement device for a now very out of date Lenovo Yoga...
Will this ROM work with BAH2-W19? The 4G / 64G UK model?

sound quality
is the speaker sound quality similar to original?