Develop Bugs

[Q] SD card not mounting and NOT reading sim

I hope some clever, kind soul can help me here. I just tried to backup my current rom using rom manager and now my phone can't mount my sd card or read my sim. I think it may have something to do with amonra recovery which I thought I'd failed to install but now appears when I go into recovery. Even when I mount a different sd card the phone can't read it. I think I'm well out of my depth here but am crossing everything hoping for assistance.

Okay I've read and read and read for the last 3 hours and I'm still totally clueless. The phone won't connect to pc either. Any help would be appreciated. Time for 3 hours sleep now

Classic USB Brick. Don't worry, try this: http://android.modaco.com/content/h...com/309939/usb-brick-rickrolled-b0rked-fixed/

Thanks but I'm confused. My hboot is 0.93 and when I follow the next link it seems to suggest I need to downgrade hboot. Is this right or am I being really stupid?

Or is it this I should be following:
2. Enable the SD Card functionality. Boot your phone in FASTBOOT mode (back + power), and enter this command: 'fastboot oem enableqxdm 0' . This will re-enable your SD card.
If so, I don't understand how to enter any command here. There is no option to enter anything. Once again any replies would be very welcome

You have to install Android SDK in order to issue those commands. http://developer.android.com/sdk/index.html

Okay thanks for your patience. I'll do that next. Don't leave me

Downloaded SDK tools but get the message that I need Java development kit and now I can't figure out what I need to download from all the options at java.oracle

pinocchio61 said:
Downloaded SDK tools but get the message that I need Java development kit and now I can't figure out what I need to download from all the options at java.oracle
Click to expand...
Click to collapse
Here you go buddy: http://www.oracle.com/technetwork/java/javase/downloads/jdk-6u25-download-346242.html
Ain't leaving you.

hmm yes I downloaded and installed http://download.oracle.com/otn-pub/java/jdk/6u25-b06/jdk-6u25-windows-i586.exe but when I run sdk tools setup still get the message that java se development kit not found. I must be doing something wrong

pinocchio61 said:
hmm yes I downloaded and installed http://download.oracle.com/otn-pub/java/jdk/6u25-b06/jdk-6u25-windows-i586.exe but when I run sdk tools setup still get the message that java se development kit not found. I must be doing something wrong
Click to expand...
Click to collapse
That's windows for you. You do have a 32 bit system, right ? Try rebooting your PC. You have installed it in the default location c:\Program Files\blabla..

Yes it's a 32 bit system and I installed to default location. I've checked java update too and have the latest version. I rebooted but to no avail. I don't think my mum can help with this one....

pinocchio61 said:
Yes it's a 32 bit system and I installed to default location. I've checked java update too and have the latest version. I rebooted but to no avail. I don't think my mum can help with this one....
Click to expand...
Click to collapse
I'm your mum for now
Try uninstalling SDK and Java, reinstall Java and after that SDK.

will do. As an interesting sidenote my phone won't charge from mains only via usb connection and even that's sporadic

Still the same unfortunately. How frustrating!

pinocchio61 said:
Still the same unfortunately. How frustrating!
Click to expand...
Click to collapse
Try running it as "administrator".

You can use the ZIP version , unzip it , then dowload the tools using the manager , or download only the tools package
little trick :
If you want to use the installer anyway , hit the "back" button when you get the java error , then next again . The error should vanish. worked for me

hackwell said:
You can use the ZIP version , unzip it , then dowload the tools using the manager , or download only the tools package
little trick :
If you want to use the installer anyway , hit the "back" button when you get the java error , then next again . The error should vanish. worked for me
Click to expand...
Click to collapse
Oh wow I think something is happening

It seems to be downloading a whole bunch SDK platforms quite slowly. Does that sound right? Thanks again btw

well... no...
You just need the tools , not the whole developpement platform.
Just select the SDK tool in the package window

[GUIDE] LineageOS 17.1 ROM for Galaxy A50 Android 10 Q

The phone must be installed TWRP Recovery. Use at your own risk, I'm not responsible for bricking your device.
Installation Instructions:
1. Enter TWRP Recovery Mode: Turn power off; Press and hold Volume Up key + Power key, when samsung logo appears release power key only, keep pressing volume up until TWRP recovery appears
2. Select Wipe - Format Data - type "yes" and confirm
3. Copy GSI ROM to your phone
4. Install - Install Image - select lineage-17.1-20200413-UNOFFICIAL-treble_arm64_bvN.img - select System Image and Confirm to flash.
5. Select Reboot - System ( boot without magisk )
6. Setup the Phone
7. INSTALL GAPPS: Enter TWRP Recovery Mode
8. Copy GAPPS zip file from PC to Phone
9. Select Wipe - Advanced Wipe - select "System" - Repair or Change File System - Resize File System - Confirm to Resize.
10. Select Install - select open_gapps-arm64-10.0-nano-20200408.zip and Confirm Flash
11. Reboot - System
12. ROOTING: Enter TWRP Recovery Mode
13. Copy magisk manager apk from pc to phone
14. Reboot to Recovery ( boot with magisk )
15. Connect the phone to internet
16. Install magisk manager
Done!
Download:
LineageOS 17.1 ROM
Open Gapps
WATCH VIDEO HOW TO INSTALL IT: https://youtu.be/u9gDx6VEORo

Thanks. So this is GSI? Bugs?

Youtube comments mention:
Fingerprint not working.
MTP not working.
Face lock also not working.
but also he say's; "This is Generic GSI ROM, it means. it has some basic feature and limitations"
---
Edit: I couldnt get this to install, followed the how-to and when i tried to reboot i got "no OS installed" in twrp. tried 3 times, but no joy, A505FN

Hello everyone
iam in the Process of considering to put LOS on my device.
But the i saw the remarks from InFam0us-1985
Is it therefor not adviceable to use this on a Samsung Galaxy A505FN because this is exactly what i have
Saludos from Spain

DId i Brick my Samsung Galaxy A505FN?
Hello one Question:
"did i Brick my device if for some reason after Trying to flash TWRP it fell back in to OEM-locked and i’ am now in a Boot Loop, ore is the any Hope?
I used Heimdal and at first it did the Job but then it would not start again as expected.
After some attempts to flash it Properly it suddenly fell back in to OEM-Locked!
Pleas if you now some advice it be greatly aprichiatet
My device is a Samsung Galaxy A505FN (Spain)

I found a way to Unbrick my device
Just to let anyone that pass her know i finally found a way to unbrick my device here it is:
After it falls back in to OEM-Lock i found you can unlock it again by doing whats explained in the Video.
Have fun be Careful when messing around with rooting
Saludos Hans

hans2020 said:
Just to let anyone that pass her know i finally found a way to unbrick my device here it is:
After it falls back in to OEM-Lock i found you can unlock it again by doing whats explained in the Video.
Have fun be Careful when messing around with rooting
Saludos Hans
Click to expand...
Click to collapse
AFAIA, OEM locked you can always flash stock?

I’ am not sure if thats True
InFam0us-1985 said:
AFAIA, OEM locked you can always flash stock?
Click to expand...
Click to collapse
All i know in case of my Samsung Galaxy A50 it is Possible!
To lift the OEM-Lock mode again.
i do not know if that is true for every Device.
Ultimately i was successful to install full Root-access!
I had great difficulty tho to use Heimdall ore any tool on Linux so i ended up using Odin in a VirtuelBox with WinXPpro
but do to no support of Long file names i had to trick there, to to make it work.
I just shorten the Names of every .tar to the first 2 letters.
I was able to successfully flash TWRP with Heimdall but not the Android ROM for my Phone.
I still wonder how to make it work!
There was one Thing i Noticed when Using Odin it seams in the Process he flashes vbmeta.img twice.
That impossible with Heimdall it creates a error message.
Well if anyone - that passes here - knows how to flash a Android 10 ROM of a Samsung Galaxy A50 using Heimdall let me know i tried very very hard to no avail.
I was surprised to learn there is no Good Tool for Linux-user doing this Task.
i only found Old Tutorials!
Is it truly possible that Heimdall dose not support modern Phone-flashing anymore properly?
As of now if a Linux-user ask me about Rooting i would advice him/her to do it in a VritualBox with windows installed.
If you have a License of a Windows Version Higher then XP good otherwise you have to Shorten File names if the very long to make it work.
I scarcely use windows anymore that why i only have a old WinXPpro legally in my Possession.
Unbelievable that the Linux-Community should not have a modern Flash Tool!???
Saludos
Hans
---------- Post added at 12:38 PM ---------- Previous post was at 12:18 PM ----------
Hello to @everyone
I had great difficulty to do this as a Linux User using Heimdall and eventually had to give up (after trying for 3 full days)!
I ended up doing it using Windows out of a VirtualBox!
It was Possible tho to successfully flash TWRP using Heimdall!
It also showed Success when Flashing Android 10 Version for my Phone but would not work.
Using the same Firmware with Odin it worked just fine.
When i compared the Flash-Protocol of Odin with what i did i only Noticed that Odin would flash vbmeta.img twice in the Process something that cant be done with Heimdall as it produces the duplicate error.
I wonder if this is the Reason it would not work.
I was also surprised to Learn, that there is virtual now Tutorial out there using Heimdall on a Modern Phone (last 12 Month ore less).
Is it truly Possible that There is now good solution for Linux Users?
I also Looked in to Fastboot and ADB and other Tools for Linux Platform and they all seam to be outdated!
Also all this Tools could not accomplish the task at hand.
Now if its me and anyone knows how to make it Work on Heimdall let me know as it is a Pretty good tool after all and by now i know it well. I would gladly start to make a tutorial and provide it here for free if i know how to make it work.
I have a txt file where i made a complete Protocol of all i tried if someone is curious ill send it to you.
Saludos Hans
##################################################################
I send some more Details of my Challenge in hope someone my know what it is i have to change!
My Device:
Samsung Galaxy A505FN
I created a .txt file protocol of all i did, i gladly provide it if someone ants to see it.
I analyzed the Whole Firmware-archive and the Pit file of my Phone to eventually find the Problem.
Note:
The Firmware was the correct one as it worked just fine using Odin!!
Analyzing all this, i only noticed two things:
First:
There are 3 seemingly identical files in the Archive and two so called
fota.zip files witch are not Identical
(one in the AP-Packet and one in the CSC-Packet)
Those where:
– cache.img one in the AP-Packet and one in the BL-Packet
– vbmeta.img one in the AP-Packet and one in the BL-Packet
– product.img one in the AP-Packet and one in the BL-Packet
Second:
Once i used Odin to finally flash successfully i noticed that in the Flash-protocol of Odin it seams Odin flashes the vbmeta.img twice in the process!?
Heimdall would not allow me to do so giving me the “Duplicate Error message”
Furthermore i tried one more thing in my desperation to make it work:
i thort: “maybe the order in wish the files a flashed chronologically matters”
So i did exactly that, trying to flash in the same chronological sequence as Odin did.
Note:
Every time i flashed, Heimdall would successfully finish the process but the Phone would not start with android
no matter what i tried.
ALSO i did successfully flash TWRP to my Phone using Heimdall
SO Heimdall works just fine on my system!
I spend a Long Time searching the Internet for a workable Tutorial or glue’s as to what is missing and how i could make it work.
I really want to succeed doing this, as i want to provide my folks offer her in Germany and also English and Spanish speaking Linux-Community with a Tutorial to do this!
I did also drop this Question and Challenge i face in some other Forums no useful answer returned so far
The latest Governmental Abuses and infringement on Peoples Privacy using Corona as excuse, makes it abundantly clear how important this kind a work is!
As for now i think, the only true option for a Linux-User is to run Odin from a Virtual-Box Windows installation, given
you have a legal copy in you're possession and have higher then Windows XP
(else you must change the Filenames of the .tar archives as WIndows XP and lower did not support excessively long filenames.)
Also you have to Install you're Phone USB drivers and have them up and running properly!
Internet access to you're VB makes it all more comfortable, but you can also use Shared folders with the Host-System to do the job.
Note:
I did indeed tried the "WINE-plugin-environment" (Windows 10) under Linux. i could not get it to work.
It was to much messing around make it recognize the USB-connection to the Phone!
I could not get it to work, I don't know if you can?
I guess that would be a nice way for Linux-users if it could be made to work!
What do you guys think, can this be solved?
Pleas let me know if you know the answer to my Challenge!
You're help is not only needed but would be greatly appreciated
Sincerely yours
Hans from Germany

well I Found this from 2017;
Yes you can do fastboot and adb cmd in Linux but you have to install adb and fastboot drivers to Linux by using
1) sudo add-apt-repository ppahablet-team/tools && sudo apt-get update
2) sudo apt-get install android-tools-adb android-tools-fastboot
That's it you get your fastboot and adb cmd’s all the cmds are same just as windows just you need to add sudo in front if not in root
Click to expand...
Click to collapse
source: https://www.quora.com/Can-I-flash-Android-devices-using-Linux
so maybe have a read of this too; https://android.gadgethacks.com/how...actory-images-android-using-fastboot-0175277/

Well i do know
Of course i know how to Install a Software on Linux and i did indeed installed those Two
But both of them would not even Detect my device jet Heimdall and Odin had no problem doing that.
Anyhow i might go about and try those Two harder.
And no Iam not confused
thank you anyway
Saludos Hans
InFam0us-1985 said:
well I Found this from 2017;
source: https://www.quora.com/Can-I-flash-Android-devices-using-Linux
so maybe have a read of this too; https://android.gadgethacks.com/how...actory-images-android-using-fastboot-0175277/
Click to expand...
Click to collapse

I cant call or receive call and send and receive messages via sim
Please help
I cannot call and receive calls
Cannot send and receive messages ,one time passwords, through message
Cannot login through whatssapp .
volte is not enabled
And no option for it to enable
I am from India using jio sim card .
Please help.
If any custom rom is used in my SM-A505F i cant do calls or receive calls nor send or receive messages.
country id : INS
Original firmware of A50 : Atb6

Will this image work with the SM-A505G version?

USB File Transfer Does Not Work
After flashing the ROM, when I connect my phone to my PC with the USB cable to transfer files, it does not work. No errors on my PC. I tries switching between modes and back to File Transfer as some suggested, but no luck.
Has anyone experienced this and if so, any solution?

OmariCelestine said:
After flashing the ROM, when I connect my phone to my PC with the USB cable to transfer files, it does not work. No errors on my PC. I tries switching between modes and back to File Transfer as some suggested, but no luck.
Has anyone experienced this and if so, any solution?
Click to expand...
Click to collapse
This is what you get with a GSI, finger print wont work either.

InFam0us-1985 said:
This is what you get with a GSI, finger print wont work either.
Click to expand...
Click to collapse
Actually it's the only Custom ROM where the finger print works. My only problem was with the USB File Transfer.

OmariCelestine said:
Actually it's the only Custom ROM where the finger print works. My only problem was with the USB File Transfer.
Click to expand...
Click to collapse
Try with a custom kernel

the project is down? Because I love LineageOs, but the A50 is abandoned :/
---------- Post added at 06:06 AM ---------- Previous post was at 05:57 AM ----------
OmariCelestine said:
Actually it's the only Custom ROM where the finger print works. My only problem was with the USB File Transfer.
Click to expand...
Click to collapse
you need to run into Twrp and it work. But only in TWRP

hey man, the project is being upgraded? Tanks for your time

InFam0us-1985 said:
Youtube comments mention:
Fingerprint not working.
MTP not working.
Face lock also not working.
but also he say's; "This is Generic GSI ROM, it means. it has some basic feature and limitations"
---
Edit: I couldnt get this to install, followed the how-to and when i tried to reboot i got "no OS installed" in twrp. tried 3 times, but no joy, A505FN
Click to expand...
Click to collapse
Got the same problem here. i guess i'm staying on the stock firmware

I have installed lineage-17.1-20210212-UNOFFICIAL-treble_arm64_bvS.
Fingerprint and MTP working.

How To Guide Installing OneUI 4 Beta / Android 12 on US Galaxy Z Fold 3 F926U/1

Updated with more compatible adb link!
This is what I did to get the new beta. Feel free to tell me how dumb I am for allowing noobies to try the beta, but the more the merrier and they should know the risks....
RISKS: Phone may not be as stable as before and you will lose all your apps and data. Camera is bugged for me
1. BACK UP YOUR CURRENT BUILD USING SMART SWITCH. THIS WILL WIPE DALVIK/CACHE/DATA. Get SmartSwitch for PC HERE
2. Download Samsung Drivers for ADB/ODIN HERE
3. If you are on firmware ending in AUI5 for the CSC version XAA then skip to step #6 . If you are not, then download the respective firmware HERE
Also Download Patched ODIN (Patched version will be less scrutinous) HERE
4. Unzip the firmware you just downloaded as well as the Patched Odin. Run ODIN and add the BL, AP, CP, Home_CSC from the unzipped firmware to the corresponding locations in ODIN
5. Turn off phone and boot into "Download Mode" by first holding Volume +/- buttons and then hold the Power button. Now plug in your phone to your PC and you will see the first small grey square in the upper left side of ODIN turn light blue (if it does not, you have issues with either the cable or drivers).
Proceed in flashing the device by simply clicking the "Start" button.
Once it is done and your phone has rebooted... Make sure that you complete the setup process just in case of authentication issues if the phone isn't already set up
6. Download the OneUI 4 Beta HERE and then follow the guide to install adb https://www.xda-developers.com/install-adb-windows-macos-linux/
7. Follow the XDA adb install guide and make sure to allow adb systemwide when asked by the program.
8. Turn off phone. Boot into device by holding Volume Up and then holding Power. This will take you into recovery mode, where you will see the option to "update via ADB sideload".
Use the volume down key to navigate down to that option and press power to initiate the adb sideload function
9. Open command prompt by pressing the Windows key and typing "cmd" (no quotes) and press ENTER.
10. Type into the command prompt (of course remove the quotes) "adb sideload C:\path\to\your\oneui4\zip\file" . For example if I download that file into my Downloads folder, I would then type "adb sideload C:\Users\MyPC\Downloads\949981470b3948c3aa05a19e8a2edbd3.zip"

Bro I have SM-F926B, I downloaded the correct CSC but can't install the beta, I got a message on smd says can't read. Any help please?

shadi90 said:
Bro I have SM-F926B, I downloaded the correct CSC but can't install the beta, I got a message on smd says can't read. Any help please?
Click to expand...
Click to collapse
This is for US Fold 3 models f926U/1. Sorry brotha. Basically you need to change the beta file you downloaded to this http://fota-secure-dn.ospserver.net...48:16&px-unum=&px-nb=UGtezEZ854jbmFcvWGxLEA== as well as flash AUJ7 firmware first. I hear UK with CSC BTE works fine. Get it at https://samfw.com/firmware/SM-F926B/BTE/F926BXXU1AUJ7 . After you replaced those files, just follow the instructions again

Thanks for this Guide. But i have issue with Adb sideload update.zip
I downgrade to AUI5 and been using XAA firmware since i bought T-mobile Zfold3.
And since beta was released, I'd been trying to register for OneUI4 in Samsung Memeber app but No Banner or under rBenefit tab.
So saw your guide here and tried to followed your direction but adb sideload fails i get CANNOT READ message.
when i typed adb Devices it shows my device so adb is working but cannot sideload.
when i downloaded the update it was .bin 949981470b3948c3aa05a19e8a2edbd3.bin so i renamed it to .zip, i got the CANNOT READ message then renamed it to update.zip still the same Cannot Read.
I am using windows 11.

Haven't logged in to XDA in years. Just wanted to say THANK YOU.

mha1021 said:
Thanks for this Guide. But i have issue with Adb sideload update.zip
I downgrade to AUI5 and been using XAA firmware since i bought T-mobile Zfold3.
And since beta was released, I'd been trying to register for OneUI4 in Samsung Memeber app but No Banner or under rBenefit tab.
So saw your guide here and tried to followed your direction but adb sideload fails i get CANNOT READ message.
when i typed adb Devices it shows my device so adb is working but cannot sideload.
when i downloaded the update it was .bin 949981470b3948c3aa05a19e8a2edbd3.bin so i renamed it to .zip, i got the CANNOT READ message then renamed it to update.zip still the same Cannot Read.
I am using windows 11.
Click to expand...
Click to collapse
Don't rename the file.
What I always do with adb related stuff is put it in the root of my C drive. So it would be
Code:
C:\adb\platform-tools\
Then put the .bin file in here as well.
After that open cmd and do
Code:
cd C:\adb\platform-tools\
and hit enter.
After that do adb sideload 94 and hit tab so it should autofill the name of the update file.
Let me know if you have any questions.

Thanks for the instructions as they worked for me. I did receive an error before it finished at "(~94%) adb: failed to read command: No error". Phone booted and the system is showing One UI version 4.0, Android Version 12.
QUESTION though. What is up with the difference in Baseband version? I am seeing the official release having the last 2 digits of "JF" but on the phone just flashed, it is showing "JH".
For reference, complete Baseband version: F929U1UEU1ZUJH after flashing. Might just be my ignorance but thought I would ask.
Thoughts? And thank you again!

AlexMartin00 said:
Thanks for the instructions as they worked for me. I did receive an error before it finished at "(~94%) adb: failed to read command: No error". Phone booted and the system is showing One UI version 4.0, Android Version 12.
QUESTION though. What is up with the difference in Baseband version? I am seeing the official release having the last 2 digits of "JF" but on the phone just flashed, it is showing "JH".
For reference, complete Baseband version: F929U1UEU1ZUJH after flashing. Might just be my ignorance but thought I would ask.
Thoughts? And thank you again!
Click to expand...
Click to collapse
The baseband is just something that gets updated, so ZUJH is the Android 12 beta firmware. Every time you update your firmware the baseband gets updated as well.
More technical: Baseband is firmware that controls all radio devices on the phone, including GPS, Wi-Fi, Bluetooth, NFC, cellular data, and more.

Will this work on att Galaxy fold 3 since I can't get update cause att blocks it.

Hero_is_Over said:
This is what I did to get the new beta. Feel free to tell me how dumb I am for allowing noobies to try the beta, but the more the merrier and they should know the risks....
RISKS: Phone may not be as stable as before and you will lose all your apps and data. Camera is bugged for me
1. BACK UP YOUR CURRENT BUILD USING SMART SWITCH. THIS WILL WIPE DALVIK/CACHE/DATA. Get SmartSwitch for PC HERE
2. Download Samsung Drivers for ADB/ODIN HERE
3. If you are on firmware ending in AUI5 for the CSC version XAA then skip to step #6 . If you are not, then download the respective firmware HERE
Also Download Patched ODIN (Patched version will be less scrutinous) HERE
4. Unzip the firmware you just downloaded as well as the Patched Odin. Run ODIN and add the BL, AP, CP, Home_CSC from the unzipped firmware to the corresponding locations in ODIN
5. Turn off phone and boot into "Download Mode" by first holding Volume +/- buttons and then hold the Power button. Now plug in your phone to your PC and you will see the first small grey square in the upper left side of ODIN turn light blue (if it does not, you have issues with either the cable or drivers).
Proceed in flashing the device by simply clicking the "Start" button.
Once it is done and your phone has rebooted... Make sure that you complete the setup process just in case of authentication issues if the phone isn't already set up
6. Download the OneUI 4 Beta HERE and then download the "15 Second ADB Installer" HERE
7. Install the 15 second adb installer and make sure to allow adb systemwide when asked by the program.
8. Turn off phone. Boot into device by holding Volume Up and then holding Power. This will take you into recovery mode, where you will see the option to "update via ADB sideload".
Use the volume down key to navigate down to that option and press power to initiate the adb sideload function
9. Open command prompt by pressing the Windows key and typing "cmd" (no quotes) and press ENTER.
10. Type into the command prompt (of course remove the quotes) "adb sideload C:\path\to\your\oneui4\zip\file" . For example if I download that file into my Downloads folder, I would then type "adb sideload C:\Users\MyPC\Downloads\949981470b3948c3aa05a19e8a2edbd3.zip"
Click to expand...
Click to collapse
hi I'm getting a status 1 error with my sideload

erneyone said:
hi I'm getting a status 1 error with my sideload
Click to expand...
Click to collapse
What does the error say?

I keep getting cannot read '949981470b3948c3aa05a19e8a2edbd3.bin and I do have the file on my ADB folder which is on the C drive i don't know if it matter but I'm using a windows 11 laptop

zimgir124 said:
What does the error say?
Click to expand...
Click to collapse
Status 1

Is there a mirror for the beta download anywhere? It looks like the link isn't working for me.

ElGuyarc said:
I keep getting cannot read '949981470b3948c3aa05a19e8a2edbd3.bin and I do have the file on my ADB folder which is on the C drive i don't know if it matter but I'm using a windows 11 laptop
Click to expand...
Click to collapse
was getting the cannot read error too.. the problem is the outdated adb version installed from the 15 second adb link in the op
download this:
How to install ADB on Windows, macOS, and Linux
A step-by-step guide to get you started with the Android Debug Bridge tool.
www.xda-developers.com

Dick_Stickitinski said:
was getting the cannot read error too.. the problem is the outdated adb version installed from the 15 second adb link in the op
download this:
How to install ADB on Windows, macOS, and Linux
A step-by-step guide to get you started with the Android Debug Bridge tool.
www.xda-developers.com
Click to expand...
Click to collapse
thank you so much...

I updated my SM-F926U1 with the Beta 4 its really buggy for me
Just want to get my facts straight. Can I just flash back to non-beta ?
What will happen to my Beta status will I still be able to OTA update when the next beta comes out ?

I have updated this with the newer adb binary install guide. I use the latest binaries from Android Studio and add them to path manually so I didnt know the 15 second installer was that outdated
Also yes you can downgrade by flashing the AUI5 that I posted in the guide

Hero_is_Over said:
I have updated this with the newer adb binary install guide. I use the latest binaries from Android Studio and add them to path manually so I didnt know the 15 second installer was that outdated
Also yes you can downgrade by flashing the AUI5 that I posted in the guide
Click to expand...
Click to collapse
Is it a good idea to wipe my data when doing an downgrade like this ?

Hero_is_Over said:
I have updated this with the newer adb binary install guide. I use the latest binaries from Android Studio and add them to path manually so I didnt know the 15 second installer was that outdated
Also yes you can downgrade by flashing the AUI5 that I posted in the guide
Click to expand...
Click to collapse
I thought you can't flash a previous version of Android once you're on the higher version?

How To Guide [Guide] Xiaomi Mi Pad 5 MIUI12/13 ROOT Step-by-step - Pass SafetyNet, Widevine L1

Everything you do, you do at your own risk. I'm not responsible for all damages, this can also lead to loss of warranty.
Hi,
Probably many of you know how to do a Magisk install without TWRP, but this guide is for people who don't know and don't want to mess things up.
I will try to show you step by step how to do it.
Many thanks to:
kdrag0n
topjohnwu
Leave them a nice feedback
!!! Before we start make sure your device is unlocked, if you don't know how to do it below is link to official Xiaomi guide !!!
https://c.mi.com/thread-2262302-1-0.html
Requirement
Xiaomi Mi Flash ver. =>3-14-0 - Needed to install all adb drivers Download
ADB & Fastboot tools - Could be the one built into Mi Flash tool I'll use this to make it simple
Magisk =>24.2 - This software is base of our rooting process Download
SafetyNet Fix => 2.2.1 (Zygisk) - Needed to backdoor SafetyNet fail check, at the moment it is only working method for Mi Pad 5 Download Make sure you download the Zygisk version!
Boot.img - You can download from official MIUI website full flashable rom and separate boot.img file from there, or use my if your Miui version is China 13.0.5, EEA 13.0.3, Global 13.0.1
China 13.0.5​EEA 13.0.3​Global 13.0.1​​​Installation
To make it easier, Green color mean what you need to do on Tablet, Orange on PC
Unzip Mi Flash tool
Open folder and run XiaoMiFlash.exe, if window "Driver" won't pop-up click on the Driver tab and then "Install" button and close all windows.
Connect your tablet to computer, when your tablet ask how you want use USB, choose File Transfer/Android Auto
Copy to internal storage Magisk-v****.apk, safetynet-fix-v****.zip and boot.img
Open File Manager on your tablet find a folder where you copied all files, and install Magisk
Open Magisk app, and click on Install in section Magisk, then select "Select and Path a File", after that find your boot.img file and click on it
Click "LET'S GO" button on the right side and wait until process will be finished
On your computer in the tablet's storage window, go to the file specified in the application probably /Download/magisk_patched-*****
Copy this file to a subfolder of Mi Flash on your computer, exactly to MiFlash2020-3-14-0\Source\ThirdParty\Google\Android and change the name of this file to boot.img
Open PowerShell/Windows Terminal in this folder (Hold Shift + Right click -> Open PowerShell window here)
Make sure your tablet have enabled USB debugging in Developer options Setting -> Additional settings -> Developer options -> USB debugging
Turn off your tablet, then hold down Power and VOL- until the screen lights up, then release power button, if Fastboot appears, everything went fine
Go back to your Terminal window and type to check if your computer see your tablet
Code:
./fastboot.exe devices
If you see answer "******** fastboot" it mean there is communication between PC and Tablet
Next type this command to flash patched boot image
Code:
./fastboot.exe flash boot boot.img
Next type this command to reboot your device
Code:
./fastboot.exe reboot
Restart can take a longer time than normal
Open Magisk app and check status of Magisk, if you see for exaple "Installed 24.2 (24200)" everything went fine
Open Settings in right corner of app and in section App click on Hide the Magisk app then type name for hidden app, it will ask to install new app so do it
Open again Magisk app and open Settings in section Magisk enable Zygisk (Beta) and Enforce DenyList
Click on Configure DenyList than click on three dots in right corner and uncheck Show system apps
Search for all the apps in the list below and check them. It is important to click on their name to see all modules, once you have done this click on the box to activate all of them
Code:
Google
Google Assistant (I have two)
Google Pay
Google Play services
Google Play Store
After that reboot your tablet, and open again Magisk app
On the bottom click on Modules
Click on Install from storage button and find file safetynet-fix-v*******.zip, than click on it
After that reboot your device one more time
After reboot open Android Settings go to Apps and Unhide system services than find and clear all data of Google Play services and Google Play Store
Reboot tablet last time
If you have reached this point it means that everything has gone correctly, probably for about 3 hours you will still not be able to install Netflix and some banking applications but after this time everything will be back to normal, this is because Google's servers have detected that Magisk has been installed but that the application has been changed and Zygisk has been enabled so at the next check it notices that everything is Ok and gives access back.
Quick explaination what happend here:
Magisk has been installed and device is Rooted
The application has been changed and hidden
Zygisk has been activated and hidden from Google services
SafetyNet-fix was installed, which restores the functionality of SafetyNet and Widevine L1, which is blocked after the installation of Magisk and unlocked Bootloader

Hello,
(I use google translate).
Thanks for your method. Before using it, I would like to ask you a few questions.
I have already rooted a few devices (mipad 1, mi phone, htc...) with my macbook and twrp.
The adb files are already installed on my mac.
1) once the pad 5 is rooted, should I, like on my phone, patch the new boot.img file with each update?
2) Could I install the twrp application afterwards to be able to do a complete backup of the system and possibly install a version of lineageos later?
3) Is there a version of miflash unlock tool for mac os x?
4) Should I register or register on the xioami site before unlocking the boot?
Thank you in advance for your method and your answers.
Nux01

Nux01 said:
Hello,
(I use google translate).
Thanks for your method. Before using it, I would like to ask you a few questions.
I have already rooted a few devices (mipad 1, mi phone, htc...) with my macbook and twrp.
The adb files are already installed on my mac.
1) once the pad 5 is rooted, should I, like on my phone, patch the new boot.img file with each update?
2) Could I install the twrp application afterwards to be able to do a complete backup of the system and possibly install a version of lineageos later?
3) Is there a version of miflash unlock tool for mac os x?
4) Should I register or register on the xioami site before unlocking the boot?
Thank you in advance for your method and your answers.
Nux01
Click to expand...
Click to collapse
Hi Nux01,
1. Unfortunately yes, TWRP isn't supported for Pad 5 yet.
2. It won't work, TWRP app is only making a request to TWRP custom recovery, until it doesn't exist you can't even install custom ROM
3. It is, but i didn't test it yet on Pad 5, and I don't know if it will work with new decides because last release is from 20.07.2020.
https://github.com/francescotescari/XiaoMiToolV2/releases
4. Yes, you need Xiaomi account, also your device has to be logged in, and registered to unlock, Xiaomi made complete guide how to do this, link is on the top of this post.

Hello,
Thank you for your quick reply.
The latest version of Mitool does not work. On the other hand, with regard to version 20.7.21, it's OK.
What does it mean: "I do not know if it will work with new decides".
And to unlock the bootloader, I have to use the Xiaomitool V2 application?
Thanks again.
NUX01

Nux01 said:
Hello,
Thank you for your quick reply.
The latest version of Mitool does not work. On the other hand, with regard to version 20.7.21, it's OK.
What does it mean: "I do not know if it will work with new decides".
And to unlock the bootloader, I have to use the Xiaomitool V2 application?
Thanks again.
NUX01
Click to expand...
Click to collapse
I mean it's quite old release so it may not work with current unlock bootloader process on new devices like a Xiaomi 12, Xiaomi Pad 5 etc. I can't promise it won't brick your device, only confirmed method is by official Xiaomi tool.

Thank you
I'll wait a little bit before rooting my tablet.
Have a nice day.

Followed the instruction, worked like a charm. Although I had unknown "chinese sings" errors with the driver install it worked. By the way there is a newer version of the flashing tool.
Thanks for the effort of writing this down!

Hello,
I just managed to unlock the bootloader of my tablet "Pad 5".
I tried under Mac and Linux with Xiaomitool V2 without success (error 20036 and 20045).
I also tried with VirtualBox who did not recognize the tablet.
I succeeded with VMware and Windows 7 by testing different drivers and it worked.
I just root the tablet with Magisk.
On the other hand, is there the equivalent of TWRP to make a complete system backup. Apart from Titanium and MyBackup.
Thanks for your help.

thanks dude.
didn't try this yet, just wondering.
can't i just flash recovery and then flash magisk.apk?
thanks

Can i update ota to 13.0.2 after rooted? Just update and root again?

Cpanel10x said:
Can i update ota to 13.0.2 after rooted? Just update and root again?
Click to expand...
Click to collapse
You can update, but after that you need root again but with boot.img from 13.0.2

How to get the boot.img 13.0.2? I checked the 3GB Firmware and only found vendor_boot.img. Is it the same thing?

Never mind. I got the boot.img from here: https://miuirom.org/tablets/xiaomi-pad-5

Thomas Brown 99 said:
Never mind. I got the boot.img from here: https://miuirom.org/tablets/xiaomi-pad-5
Click to expand...
Click to collapse
boot.img for miui global 13.0.3(RKXINXM) isn't available there. Plz help...

Thanks for this awesome guide. Do you have some suggest about the magisk modules to install?

thanks, it just worked perfectly and your step by step guide is very handy and helpful. thanks so so much.

vjsaini00 said:
boot.img for miui global 13.0.3(RKXINXM) isn't available there. Plz help...
Click to expand...
Click to collapse
Today evening, I'll add more boot.img

kisielec said:
Today evening, I'll add more boot.img
Click to expand...
Click to collapse
eagerly waiting, Thanks

Hey there.
I have done everything above and i MIGHT have some problem. The problem with my problem is that its not really reproducable easily even for me.... Weird, I know!
Lets go into details:
Issue description: When I reboot my tablet it goes into "MIUI Recovery" window, on which I am offered to reboot the device or clean.... And when I reboot it goes back to the recovery screen again. Like a loop-hole.
....
But then if I leave it untouched for several minutes it reboots itself and launches the system properly finally...
When did it start: It first started after I performed this step:
24. Click on Install from storage button and find file safetynet-fix-v*******.zip, than click on it
25. After that reboot your device one more time
Click to expand...
Click to collapse
When I finally landed in the system I of course continued and performed further steps. After another reboot in step 27 the same thing happened but much, much longer.
I thought it somehow self fixed and works - once I am in the system. Right? So I did a reboot to test it. And no... recovery screen again for another 20 or so minutes until finally MIUI loaded fully.
Now I am afraid to turn off / reboot my tablet... I am afraid it might never finish booting next time.
Any ideas whats wrong and how to fix this weird and irregular behaviour?
My details:
Device: Xiaomi Pad 5 6/256gb
Original system was Chinese. I have reinstalled to Global one a version ago.
MIUI version currently running: 13.0.3(RKXMIXM)
Android version: 11 RKQ1.200826.002
Magisk version: 25.1 (25100) (32)
Magisk Modules: Universal SafetyNet Fix v2.2.1 (yes I made sure to download around Zygisk section)
Anything else I shall provide?

cysmaster said:
Hey there.
I have done everything above and i MIGHT have some problem. The problem with my problem is that its not really reproducable easily even for me.... Weird, I know!
Lets go into details:
Issue description: When I reboot my tablet it goes into "MIUI Recovery" window, on which I am offered to reboot the device or clean.... And when I reboot it goes back to the recovery screen again. Like a loop-hole.
....
But then if I leave it untouched for several minutes it reboots itself and launches the system properly finally...
When did it start: It first started after I performed this step:
When I finally landed in the system I of course continued and performed further steps. After another reboot in step 27 the same thing happened but much, much longer.
I thought it somehow self fixed and works - once I am in the system. Right? So I did a reboot to test it. And no... recovery screen again for another 20 or so minutes until finally MIUI loaded fully.
Now I am afraid to turn off / reboot my tablet... I am afraid it might never finish booting next time.
Any ideas whats wrong and how to fix this weird and irregular behaviour?
My details:
Device: Xiaomi Pad 5 6/256gb
Original system was Chinese. I have reinstalled to Global one a version ago.
MIUI version currently running: 13.0.3(RKXMIXM)
Android version: 11 RKQ1.200826.002
Magisk version: 25.1 (25100) (32)
Magisk Modules: Universal SafetyNet Fix v2.2.1 (yes I made sure to download around Zygisk section)
Anything else I shall provide?
Click to expand...
Click to collapse
I also have this module installed without problems, as there is no recovey for Pad5, it is a good idea to install in magisk the module Magisk Bootloop Protector, which serves exactly to prevent what you are afraid that happen with your tablet

Teclast M40 Pro Discoveries

Teclast M40 Pro Discoveries​Various helpful points of knowledge to unlock your bootloader, to root, and use your tablet.
Problem: Where can I obtain the official firmware?
Solution: Teclast Website
Usage: type M1A3 in search
Problem How can I unpack "pac" files?
Solution: Build C utility divinebird / pacextractor
Solution: Download pre built Linux executable pacextractor.zip
Usage: >./pacextractor Firmware.pac
Bash:
git clone https://github.com/divinebird/pacextractor
cd pacextractor
make
Problem: I need tools to flash my device
Solution: Download the latest SPD Upgrade Flash Tool SPD_Upgrade_Tool
Problem: msvcr100.dll missing error in Windows whilst running SPD (Factory/Research/Upgrade) Tools
Solution: Download and install 2010 Visual C++ Distribution
Problem: I want to unlock my bootloader. (Window and Linux kit)
Solution: Download TeclastM40Pro_Unisoc_UnlockTools.zip
Usage: Read readme file.
Problem: How can I remove the dm_verify warning on boot up after unlocking the bootloader?
Untested Solution: digitally sign the vbmeta partition and write it back. See [Tutorial] How to create a custom signed vbmeta.img
Problem: I want to root my device.
Solution: Modify boot.img with Magisk, then sign.
Usage: Upload to your device's download directory, the current boot.img read from your device, or from the same version firmware. Then install Magisk app from here. Use Magisk to patch the boot.img. Sign the partition. Then flash back the signed magisk version of boot.img to "boot_a" partition. Guide to flashing single partition at Hovatek Website
Problem: I need to emergency flash my device?
Solution: Currently only from Windows, use SPD Upgrade Tools to reflash firmware.
Usage: From the tablet powered off, or if boot looping. Hold down the power-button and volume-down for five seconds, release the power-button, and keep the volume-down button still held for another five seconds, then release or release if the detected earlier. Windows and SPD tools should then detect your device to flash.
Problem: I want to improve my Telcast M40 Pro
Solution: List of suggested apps below;
FDroid App Store F-Droid Website
Aurora > via FDroid. App store allowing the direct download from Google Playstore, without your own account.
Lawnchair > via FDroid. Fast open source sophisticated launcher.
AdAway > via FDroid. Removes adverts whilst using apps.
TrackerControl > via FDroid. Manages apps access to internet, and blocks spyware and trackers.
.

Problem: I want root mode without the effort of hacking a rom partition.
Solution: For those with World version Teclast M40 Pro device, here is a signed rooted boot partition I created. Read the readme file inside the zip. You will require an unlocked device, windows setup with USB drivers for Teclast, the complete firmware from Teclast website, and SPD Update Tools installed. If you're successful, then on rooting you will need to install Magisk app to get root active. Magisk will reboot once to finalise.
Download : TeclastM40Pro_ROW__v1p0_signedboot_magiskrooted.zip
Download : TeclastM40Pro_ROW__v1p2_signedboot_magiskrooted.zip

SPD Upgrade Tools is closing while trying to flash stock firmware, both with M40 Pro locked and unlocked bootloader. What should i do?

laurorual said:
SPD Upgrade Tools is closing while trying to flash stock firmware, both with M40 Pro locked and unlocked bootloader. What should i do?
Click to expand...
Click to collapse
Sorry for replying late. I got no indication of the response. To the problem, I can only suggest getting a different version of SPD or m aking sure your computer system is properly updated. I hope you've already solved the issue!
Maybe you're experiencing, "Problem: msvcr100.dll missing error in Windows whilst running SPD (Factory/Research/Upgrade) Tools" See above for solution.

I've noticed a new ROM for world edition, "M40 Pro(M1A3)_Android 11.0_ROW V1.02_20220525", but not getting any system update options for OTA. People flashing their systems may want the latest firmware!

Thanks to your Magisk file I was able to root my tablet, but when updating to the latest version it goes into bootloop, I have tried updating the original firmware image again, but it also goes into bootloop.
Is there any way to install Magisk modules?
Thanks for your post, it helped me a lot to unlock my tablet.
Edit: My version is the M1A1 firmware V1.03_20210804
Edit 2: Finally, when updating my tablet with the root file that is in the post, it did not allow me to install any Magisk module, the solution is to download version 24.3, and update automatically, without changing to a higher version of Magisk

Glad you worked it out Miny !!! Sorry the warning emails for new posts have been going to a gmail account I no longer use.
Also your hardware maybe different and require it's own unique firmware and boot images. It seems the cracking in similar though.

Some questions:
Do I need to unlock my bootloader in order to be able to get root with magisk?
The tools for unlocking the bootloader uses
Code:
fastboot flashing unlock_bootloader
. My version of fastboot (33.0.3p1-android-tools) doesn't have that command. The included one (0.0.0-09219) does, but I wan't to be careful about running softwar from untrusted sources. Where is that version of fastboot from?
Does any of the steps necessary to get root access delete my data?

Hi there.
I have a m40pro (M1A1) running android 11, do you know if I can install firmware Z3A1 to get android 12? Or will be bricked?
Thanks in advance

rubsbcn said:
I have a m40pro (M1A1) running android 11, do you know if I can install firmware Z3A1 to get android 12? Or will be bricked? Thanks in advance
Click to expand...
Click to collapse
To tell you the truth, not sure. Most SoC are impossible or near impossible to brick. They usually allow for an injection or have a read only boot section. Other words you could test. Also research difference in hardware between models, and that may indlicate if something may not work. The kernel/drivers are the improtant aspect.

jorkusjorkus said:
Some questions:
Do I need to unlock my bootloader in order to be able to get root with magisk?
The tools for unlocking the bootloader uses
Code:
fastboot flashing unlock_bootloader
. My version of fastboot (33.0.3p1-android-tools) doesn't have that command. The included one (0.0.0-09219) does, but I wan't to be careful about running softwar from untrusted sources. Where is that version of fastboot from?
Does any of the steps necessary to get root access delete my data?
Click to expand...
Click to collapse
What OS are you using? Google is constantly changing Android Studio and the added modules. Then others may build with options removed. Personally I use Archlinux and load up standalone android-tools from the community repository. Currently v33.0.3-3
Try fastboot --help
Your version may have
Code:
fastboot flashing unlock_critical

minyfriki said:
Thanks to your Magisk file I was able to root my tablet, but when updating to the latest version it goes into bootloop, I have tried updating the original firmware image again, but it also goes into bootloop.
Click to expand...
Click to collapse
What I found works, is when using SPD Research Tool, load up the firmware.pac and then go into settings and click "Select All Files" and again to unselect, which leaves the default required items.
Then manually change BOOT to the Magisk img. Then click on all VBMETA types, and UBOOT_LOADER (may not be required though). Then flash.
You should get bootable tablet (no looping). Warning: UserData partition is written over.
I'll share my Magisk image for v1.2

e8hffff said:
What OS are you using? Google is constantly changing Android Studio and the added modules. Then others may build with options removed. Personally I use Archlinux and load up standalone android-tools from the community repository. Currently v33.0.3-3
Try fastboot --help
Your version may have
Code:
fastboot flashing unlock_critical
Click to expand...
Click to collapse
I'm using the same version as you on the same OS. After some research it seems like unlock_bootloader was removed in this commit from 2018. From what I can tell, unlock_critical does something else (unlock_bootloader runs
Code:
fb_queue_download("unlock_message", data, sz); fb_queue_command("flashing unlock_bootloader", "unlocking bootloader");
while unlock_critical runs
Code:
do_oem_command("flashing", "unlock_critical" and doesn't take the signature argument);
)
I'll see if I can compile the older version with the needed command.
What about my other questions?

Issue: Android not starting. I had the infinite restart when plugged in the usb. I tried to reload the installation package (succeeded), but didn't fixed the issue. Battery was not charging yet. When I started the Teclast M40 pro, the logo showed up, but the tablet turned off again.
Solution: I have disassembled the cover, unplugged the 5 pin plug from the battery for half hour and plugged again. When I tried to turn it on, everything was fine.

dougcwb said:
Solution: I have disassembled the cover, unplugged the 5 pin plug from the battery for half hour and plugged again. When I tried to turn it on, everything was fine.
Click to expand...
Click to collapse
Wow that's weird Doug. Remember this, if you don't already know, that you can do a cold start by holding down the power button for over 10 seconds, on most devices.
I guess you're running now on rooted tablet !!!

e8hffff said:
Wow that's weird Doug. Remember this, if you don't already know, that you can do a cold start by holding down the power button for over 10 seconds, on most devices.
I guess you're running now on rooted tablet !!!
Click to expand...
Click to collapse
I did the installation package process that the Teclast sent me. The last thing they told me to do was keep trying to install the package (wft?). Well, I just open the tablet, unplugged the battery for a while and after that it worked.
Maybe this resolved 2 things:
1-the battery was not properly connected in the first place, so when I plugged the 5 pin to the board it connected as it should.
2- Maybe there is a "memory" in the board attached to the battery that was bricked (or something like that) when I pulled off the plug, this memory was reseted.
BTW, when the tablet came to life again, the battery was at 87%.