Develop Bugs

Unofficial TWRP 2.8.7.1

What is better than the standard CM Recovery:
You can flash another firmware (not the CM)
Normal backup data
You can easily flash the Root
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unlock the bootloader as on CM Wiki instructions
Puth the phone in bootloader mode
In the folder with fastboot put crackling-t0x1.img
Enter the following command:
Code:
fastboot -i 0x2970 erase recovery
then Enter
Code:
fastboot -i 0x2970 flash recovery crackling-t0x1.img
Disconnect the device from the USB and remove the battery. Then replace the battery and restart the device in recovery mode to verify the installation. To do this, hold down the "Volume Down" and "Power".
You can download crackling-t0x1.img from here
http://www91.zippyshare.com/v/60lfsDiR/file.html
Credits to 4PDA Members and especially to FindYanot for developing and allowing posting here
IT is NOT my Work

I've been using this for a while, working very good!
Great to make backups and test ROMs.

There is a problem - this recovery can not mount f2fs partitions

RaidonChrome said:
There is a problem - this recovery can not mount f2fs partitions
Click to expand...
Click to collapse
for my information : which system firmware can mount f2fs partitions?

Dior DNA said:
for my information : which system firmware can mount f2fs partitions?
Click to expand...
Click to collapse
Latest Cyanogen Mod 13 has Linux 3.10, so it should be able to mount f2fs just fine

RaidonChrome said:
Latest Cyanogen Mod 13 has Linux 3.10, so it should be able to mount f2fs just fine
Click to expand...
Click to collapse
thanks, then perhaps latest CM recovery will mount f2fs just fine as well.

Dior DNA said:
thanks, then perhaps latest CM recovery will mount f2fs just fine as well.
Click to expand...
Click to collapse
It does not, in fact it is broken even with ext4 currently

PLEASE HELP, something when wrong
RaidonChrome said:
It does not, in fact it is broken even with ext4 currently
Click to expand...
Click to collapse
Is this the reason why i can't install gapp on my wileyfoxswift and an error appear("e: unable to find partition size for '/recovery") every time i use the wipe.
i upgraded from 12.1 to
13.0-20160127-NIGHTLY-crackling and use the same for recovery but did not work so i installed TWRP and this error occurs -see pics
PLEASE HELP

AromaGapp not working in TWRP
TWRP not working in Aroma Gapp need fix (Aroma is best for me since i can customize install & will not replace CM stock files/app)
In the previous post, i was able to install twrp but i found out on many trial and error that open gapp aroma/full doesn't work both on cm12.1 and cm13.0 using TWRP. Also cm13.0 recovery will not work with open gapp aroma/full.
What works: (haven't tried all version)
On TWRP - i was able to use arm64-pico-6.0 on cm13.0 20160130
On CM Recovery - arm64-aroma-5.1 on cm12.1 20160107
This is based on my experience with the HELP of the awesome people in the forum. I just want to let you know and maybe it will be useful to other noobs like me

noob2016 said:
TWRP not working in Aroma Gapp need fix (Aroma is best for me since i can customize install & will not replace CM stock files/app)
In the previous post, i was able to install twrp but i found out on many trial and error that open gapp aroma/full doesn't work both on cm12.1 and cm13.0 using TWRP. Also cm13.0 recovery will not work with open gapp aroma/full.
What works: (haven't tried all version)
On TWRP - i was able to use arm64-pico-6.0 on cm13.0 20160130
On CM Recovery - arm64-aroma-5.1 on cm12.1 20160107
This is based on my experience with the HELP of the awesome people in the forum. I just want to let you know and maybe it will be useful to other noobs like me
Click to expand...
Click to collapse
Aroma compatibility with TWRP is listed on the Open G-Apps website.
Unfortunately this is the only TWRP we have available to us.

Tamarinde said:
Aroma compatibility with TWRP is listed on the Open G-Apps website.
Unfortunately this is the only TWRP we have available to us.
Click to expand...
Click to collapse
No it is not there is this one https://s.basketbuild.com/devs/beroid/Wileyfox%20Swift%20-%20Crackling/TWRPand yes it works with aroma

Thanks
robin0800 said:
No it is not there is this one https://s.basketbuild.com/devs/beroid/Wileyfox%20Swift%20-%20Crackling/TWRPand yes it works with aroma
Click to expand...
Click to collapse
That is great! i hope i can try i try it but sadly i send it back since the phone was just here for the upgrade. Anyway thanks for the reply here and on my other post.
Much appreciated

robin0800 said:
No it is not there is this one https://s.basketbuild.com/devs/beroid/Wileyfox%20Swift%20-%20Crackling/TWRPand yes it works with aroma
Click to expand...
Click to collapse
Confirmed!!! It works... i used TWRP 3.0. Works on both aroma and pico. Thanks so much!!!!

There is a zip file and recovery. IMG file, any reason why?

image45 said:
There is a zip file and recovery. IMG file, any reason why?
Click to expand...
Click to collapse
The .img file can be flashed by fastboot.
The zip file by any non stock recovery
and yes I do know the image file is contained in the zip but some people may not

robin0800 said:
The .img file can be flashed by fastboot.
The zip file by any non stock recovery
and yes I do know the image file is contained in the zip but some people may not
Click to expand...
Click to collapse
Yes i downloaded the zip file, extracted the recovery.img then flashed by fastboot. I am used to using fastboot commands
So the zip file would function as an update file via a non stock recovery, however once installed would replace the non stock recovery with twrp version!

[6045][6.0.1][Stock-based] Project MATERIAL

Hello everyone!
I shall not complicate things! xD
I present to you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
.
.
.
*What about the features?*
Phew!
*Now show them some screenshots.*
Oh yeah,screenshots,those things!
Instructions too?
*Yeah...*
PS. Not my problem if you get your head stuck in a toaster!
And then the download button,right?
*............*
Guys,there is no music player,so I warmly suggest you install Phonograph.
Also,my favorite launcher and also a suggestion,ASAP Launcher
I FORBID anyone to use the wallpaper or any other thing I had my hands in WITHOUT MY PERMISSION in their work.
​
XDA:DevDB Information
Project MATERIAL, ROM for the Alcatel Onetouch Idol 3
Contributors
The Marionette
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Beta
Created 2016-07-13
Last Updated 2016-07-13

Reserved
1. In order to root the device,you need to download the latest version of SuperSU BETA:
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
or if that doesn't work,download the 2.74 version:
https://download.chainfire.eu/964/SuperSU/BETA-SuperSU-v2.74-2-20160519174328.zip
Then enter TWRP and write this in the terminal:
Code:
echo SYSTEMLESS=true >> /data/.supersu
After doing that,flash the SuperSU zip.
2. Aaaaaaaand,for those who want dual sim enabled,flash this right after flashing the rom!
DOWNLOAD
3. Also,if you want to make sure your LTE/dual sim truly works,flash the variant-specific modem zip by famewolf!
Grab yours HERE
4. Not to mention the optional flashable zips of removed Alcatel apps(their icons have been themed into Material Design icons,do not fret! )
DOWNLOAD
5. Those who lost WIFI have to wipe everything(except the storage,of course),flash THIS zip and then flash the rom!
6. Repeating myself,but anyhow,here is a link to the post by famewolf for those who want to switch between fastboot capability and MM!
HERE​

Looks great. Download link?
Plus, I agree - ASAP Launcher rocks.
Sent from my 6045X using Tapatalk

The Marionette said:
In order to root the device,you need to download the altest version of SuperSU BETA:
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Then enter TWRP and write this in the terminal:
Code:
echo=SYSTEMLESS=true >> /data/.supersu
After doing that,flash the SuperSU zip.
Aaaaaaaand,for those who want dual sim enabled,flash this right after flashing the rom!
https://www.androidfilehost.com/?fid=24591000424946905
Also,if you want to make sure your LTE/dual sim truly works,flash the variant-specific modem zip by famewolf!
Grab yours HERE​
Repeating myself,but anyhow,here is a link to the post by famewolf for those who want to switch between fastboot capability and MM!
Aaaaaand,to be able to switch between fastboot capabilities and MM,go HERE[/B]
Click to expand...
Click to collapse
Good Job!
EDIT:Analyzed your DualSim.zip
Looks Like that you messed up with uploading..
Why are you adding folders which don't need and in your updater script there's lines to delete system apps.

Yeah. Looks awesome. A rom refined.
GAPPS included ? Seems yes in the screens, but never know. Thanks you @The Marionette for providing us such great work.
Also, as I've lost a few the discussion thread & issue with MM dev : My phone is 6045Y, in Europe. May I get problem with LTE or data network with that rom ? Also, would I be able to restore as usual if something goes wrong ?
Sorry if that has already been discussed, but so many answers about this, I couldn't stay up to date, above all when you're not spending your life on forums.

frankee207 said:
Yeah. Looks awesome. A rom refined.
GAPPS included ? Seems yes in the screens, but never know. Thanks you @The Marionette for providing us such great work.
Also, as I've lost a few the discussion thread & issue with MM dev : My phone is 6045Y, in Europe. May I get problem with LTE or data network with that rom ? Also, would I be able to restore as usual if something goes wrong ?
Sorry if that has already been discussed, but so many answers about this, I couldn't stay up to date, above all when you're not spending your life on forums.
Click to expand...
Click to collapse
Yep,yep,gapps are inside the rom.
As for LTE,look at the second post,I added a link to famewolfs variant specific modem download folder. Just flash the one for your variant before flashing the rom!
You can always restore over TWRP or over Mobile Upgrade Q,no need to worry. U.U

The Marionette said:
Yep,yep,gapps are inside the rom.
As for LTE,look at the second post,I added a link to famewolfs variant specific modem download folder. Just flash the one for your variant before flashing the rom!
You can always restore over TWRP or over Mobile Upgrade Q,no need to worry. U.U
Click to expand...
Click to collapse
OK
Yeah, just saw the link. How stupid I am
flash Before ? Not after ?

frankee207 said:
OK
Yeah, just saw the link. How stupid I am
flash Before ? Not after ?
Click to expand...
Click to collapse
Emm,for my 6045K,I flashed the modem zip before flashing the rom.

Alek Dev said:
Good Job!
EDIT:Analyzed your DualSim.zip
Looks Like that you messed up with uploading..
Why are you adding folders which don't need and in your updater script there's lines to delete system apps.
Click to expand...
Click to collapse
I made a universal flashable zip,and then I just add/remove files. Those empty folders don't affect anything as long as I don't put an app in them. You don't need to worry.

The Marionette said:
I made a universal flashable zip,and then I just add/remove files. Those empty folders don't affect anything as long as I don't put an app in them. You don't need to worry.
Click to expand...
Click to collapse
i send you Pm but anyway you reply here But updater script delete System Apps look it....
delete("/system/build.prop");
delete_recursive("/system/app/Browser");
delete_recursive("/system/app/Compass");
delete_recursive("/system/app/HoloSpiralWallpaper");
delete_recursive("/system/app/Newsstand");
delete_recursive("/system/app/TctCalculator");
delete_recursive("/system/app/TctNote");
delete_recursive("/system/app/TctWeather");
delete_recursive("/system/priv-app/Calendar");
delete_recursive("/system/priv-app/Dialer");
delete_recursive("/system/priv-app/DownloadProvider");
delete_recursive("/system/priv-app/Gallery");
delete_recursive("/system/priv-app/GalleryNext");
delete_recursive("/system/priv-app/JrdFota");
delete_recursive("/system/priv-app/JrdTag");
delete_recursive("/system/priv-app/Launcher");
delete_recursive("/system/priv-app/Mms");
delete_recursive("/system/priv-app/Music");
delete_recursive("/system/priv-app/MusicFX");
delete_recursive("/system/priv-app/Settings");
delete_recursive("/system/priv-app/TctCamera");
delete_recursive("/system/priv-app/TctEmail");
delete_recursive("/system/priv-app/TctExchange");
delete_recursive("/system/priv-app/TctFileManager");
delete_recursive("/system/priv-app/TctFMRadio");
delete_recursive("/system/priv-app/TctSoundRecorder");
delete_recursive("/system/priv-app/TimeTool");
delete("/system/media/shutdownanimation.zip");
delete("/system/media/audio/switch_on_off/Jumping_off.ogg");
delete("/system/media/audio/switch_on_off/Jumping_on.ogg");

Alek Dev said:
But updater script delete System Apps look it....
Click to expand...
Click to collapse
Woops,the wrong zip was modified! xD

Doesn't matter when you flash the modem zips as long as it's AFTER You've run mobile Q, the panasonic eluga software or you've flashed a rom that clobbered your radio.

Fixed the DUAL SIM zip. xD

The Marionette said:
Fixed the DUAL SIM zip. xD
Click to expand...
Click to collapse
Good....Little Suggestion.....It will be good to remove the partitions from ZIp which we don't need it ...To don't replace their modems..
Editn dialer doesn't works Reversible option...I had the same issues on SPB ROM so i think the problem it's changing icons.....
Edit1anorama crashes....
Edit2:There's Music app on Build...
Edit 3:It's really faster... but Sometimes apps like Tapatalk.Fb are crashing

New build online,the quirks(broken music player was still there,something needed to be left out of the zip)
Test it out and report back.
https://www.androidfilehost.com/?fid=24591000424946929

Was just about to flash v1, but I'll try out v2 instead. Downloading it right now.

So, theres no root access.

jerpd3rp said:
So, theres no root access.
Click to expand...
Click to collapse
Did you not read post #2?
http://forum.xda-developers.com/showpost.php?p=67731851&postcount=2

Welp I booted up and everything seems to be working as it should. I'm going to root and use systemless xposed and see what happens.
Update: For some reason supersu didn't flash as systemless even after doing the command in terminal so I'm starting over, but the v2 rom itself booted up just fine.

Welp v2 no issues, rooted/xposed systemless using v85.7 since 86.1 wasn't recognized by the xposed installer even though it installed systemless with no issues twice. Gonna see how long the battery lasts and thank you @The Marionette

[RECOVERY][aio_row][UNOFFICIAL] TWRP 3.0.2-8

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TeamWin's TWRP Touch Recovery For Lenovo A7000-a
SCREENSHOT ON ATTACHMENT
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. TWRP also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
This TWRP was originally formed to work on Lenovo K3 Note. After Denis work on K3 Note, I wanted to make it that would work on Lenovo A7000-a to. Today TWRP is the leading custom recovery for Android phones.
A custom recovery is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom “ROM” like OmniROM
You can find the source code for TWRP at https://github.com/omnirom/android_bootable_recovery/​
Flashing Instructions :
To install recovery images use Flashify / Rashr / TWRP Manager from Play Store or flash in your current recovery:
1. Go to install, find and select the Images... button.
2. Browse to the image that you downloaded and select it.
3. Choose recovery and swipe to flash.
Download :
TWRP : Mod Edit: Link Removed
Remember to do backup of your current recovery before installing.​
XDA:DevDB Information
TWRP 3.0.2-8, TWRP for the Lenovo A7000
Contributors
HDHR, sandeep.sethi, Denis_PDA
Version Information
Status: Stable
Created 2016-10-29
Last Updated 2017-02-19
Mod Edit: Thread Closed

Changelog
TWRP 3.0.2-8 :
~Upgraded to TWRP 3.0.2-8 (Base, Security Patch,ETC.)
~Minor fixes
~Added ability to set system.img
=>TWRP -> Install -> Install image -> system.img -> System Image -> Swipe to confirm Flash.
~Optimized OTG FS support FAT32, exFAT, NTFS
~Flashable installation supported
TWRP 3.0.2-6 :
~Updated to TWRP 3.0.2-6 (Security Patch,Base,ETC.)
~Fixed code name error
~Backup and Restore Improvement
~Lot of Improvement
TWRP 3.0.2-5 :
~Initial release
Detailed Changelogs Here :
https://github.com/omnirom/android_bootable_recovery/commits/android-6.0

Reserved

How is it possible ? Flashing a recovery from another recovery ? Doesn't the recovery partition get overwritten?
[Thanks though for the new version]

tanish2k09 said:
How is it possible ? Flashing a recovery from another recovery ? Doesn't the recovery partition get overwritten?
[Thanks though for the new version]
Click to expand...
Click to collapse
Its will overwrite the old one with the new one... You can update via TWRP to
1. Boot to TWRP
2. Select install files
3. Select install image
4. Then select recovery image
5. Select install on recovery
6. Finish and go to reboot option and select reboot to recovery
6. Tadaaa your new Recovery installed

Themes support?

tanish2k09 said:
Themes support?
Click to expand...
Click to collapse
Support :fingers-crossed:

Thanks!

Ceco85 said:
Thanks!
Click to expand...
Click to collapse
Your welcome

What about compatibility of old backup created in 3.0.2-1

CyberDeat said:
What about compatibility of old backup created in 3.0.2-1
Click to expand...
Click to collapse
It I'll not detect backup from old TWRP,you need to backup files on new TWRP and just move your old backup to new folder one

You ported it or built it from source?

tanish2k09 said:
You ported it or built it from source?
Click to expand...
Click to collapse
Build from source on k3 note ported to a7000 :3

How to install on a non-rooted MM A7000-a?

jocph said:
How to install on a non-rooted MM A7000-a?
Click to expand...
Click to collapse
Use SP Flash tools

Thanks for replying. Can you give the steps? Doesn't spflashtool need a scatterfile? Sorry but I'm not very familiar with spflashtool.

Thnx HDHR for the recovery :good:
---------- Post added at 03:37 PM ---------- Previous post was at 03:21 PM ----------
jocph said:
Thanks for replying. Can you give the steps? Doesn't spflashtool need a scatterfile? Sorry but I'm not very familiar with spflashtool.
Click to expand...
Click to collapse
In sp flash tool...for flashing Recovery
1-Install lenovo driver
2-open sp flash tool by administration
3-load scatter file,
4-select recovery only (also select recovery u have downloaded)
5-check in option that dal dal option is tick
6- click on download
7-switch off ur phone...take out battery for 5 sec..reinsert battery and connect ur phone with pc then
It will automatically flash the recovery after u see a download ok popup window disconnect ur phone and u have successfully flash TWRP recovery

Where can I find the scatterfile for this TWRP image? The download only gives the img file. My MM A7000-a is not rooted and does not have custom recovery yet.

i flashed a theme on my old twrp.....the theme got caried on to this one......
i am unable to remove it....plez help.....
there is no folder of twrp in my sd card....

jocph said:
Where can I find the scatterfile for this TWRP image? The download only gives the img file. My MM A7000-a is not rooted and does not have custom recovery yet.
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B5os0Tgr4idrbTA1WkxhUHB6TzA/view
Scatter file...there is also a old TWRP dont use it....

[OFFICIAL][LATEST][RECOVERY] TWRP 3.2.1 for Elephone P9000

[OFFICIAL ][RECOVERY] [20-08-2017] TWRP 3.2.3-0 - TeamWin Recovery Project
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WHAT IS TWRP?
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
Read more about TWRP here: https://twrp.me/about/
What's new in 3.2.1-0:
* minui fixes (cryptomilk) * Better android-8.0 compatibility in ROM trees (Dees_Troy) * Fix missing library in android-8.0 (nkk71) * Fix inconsistent SDCard naming (DevUt) * Default to TWRP restore instead of adb backup restore to fix restore on fresh TWRP boot (jlask)
INSTALLATION:
Most devices can be updated quickly and easily within TWRP if you already have version 2.8.4.0 or higher installed
1) Download the latest version above
2) Reboot to TWRP
3) Hit Install and tap the "Install Image" button in the lower right
4) Browse to the location of the TWRP image on your device and select it
5) Select recovery from the partition list and swipe to flash
To install from SP Flash Tools:
1) Download scatter file attached to this post
2) Load scatter file into SPFT
3) Plug USB cable into device and computer
4) Press download in SPFT
5) Reboot device
To install from offical TWRP App (Requires a rooted device.)
1) Download Official TWRP App from playstore
2) Choose the device (elephone P9000 -- p9000)
3) Install it
BUGS:
If you have an issue, the first step is to post a recovery log so we can determine the cause of the issue. This is done in recovery using Advanced -> Copy Log, or adb pull /tmp/recovery.log. Once a log is uploaded we can determine how best to proceed.
Other Projects:
Make sure to also check my dualbooting guide here: https://forum.xda-developers.com/elephone-p9000/how-to/guide-dualboot-patcher-t3608213
Thanks to:
(me) Ruben Craveiro
bigbiff
Dees_Troy
Leskal
Deepflex
Tribual
XDA:DevDB Information
[OFFICIAL][LATEST][RECOVERY] TWRP 3.2.1 for Elephone P9000, Tool/Utility for the Elephone P9000
Contributors
Ruben Craveiro
Version Information
Status: Stable
Current Stable Version: 3.2.1
Stable Release Date: 2017-08-10
Device Tree
[url]https://github.com/Ruben7173/android_device_elephone_p9000[/URL]
Created 2017-08-20
Last Updated 2018-06-03

Great work, however, I can't find it in twrp app from playstore. Will this be updated soon?
What's the difference between an installation from twrp-App and flashtools?

TheMRK said:
Great work, however, I can't find it in twrp app from playstore. Will this be updated soon?
What's the difference between an installation from twrp-App and flashtools?
Click to expand...
Click to collapse
currently due to an error i made while uploading our device info i set the file to go over to twrp main page, i have already sent out a fix but needs review once its approved, it should be up and running to work with the app

Ruben Craveiro said:
currently due to an error i made while uploading our device info i set the file to go over to twrp main page, i have already sent out a fix but needs review once its approved, it should be up and running to work with the app
Click to expand...
Click to collapse
That's good news.
But again, what's the difference between an installation of twrp from its app and via flashtools. Is it in the end the same? Or do you recommend one of both methods?

TheMRK said:
That's good news.
But again, what's the difference between an installation of twrp from its app and via flashtools. Is it in the end the same? Or do you recommend one of both methods?
Click to expand...
Click to collapse
If you already have root, i recommend the app, since its an easier to way to download, install/update the recovery, but if you dont have root you need at least once to install it from flash tools, since the app is not an option yet for the moment(its not on devices list, but you can manually install it), you can download the image and flash it through the app (if you have root, that is) if you dont have roog you need to use flash tools

I have P9000 with Nougat on it, version Elephone_P9000_20170418 and I'm trying to install TWRP 3.0.2 with SPFlash Tool, I only check recovery and flash it, but when I start the phone in recovery mod displays only show "no command". Is there any scatter file for this version, and what should I do to flash it through SPFlash Tool?

tonivet said:
I have P9000 with Nougat on it, version Elephone_P9000_20170418 and I'm trying to install TWRP 3.0.2 with SPFlash Tool, I only check recovery and flash it, but when I start the phone in recovery mod displays only show "no command". Is there any scatter file for this version, and what should I do to flash it through SPFlash Tool?
Click to expand...
Click to collapse
Any scatter file from one of our stock roms should do the trick, just put it alongside the downloaded twrp image, and flash it, also twrp 3.0.2 is not official, unlike this one, this one will be able to be updated directly through the twrp app once the issue is fixed.

Ruben Craveiro said:
(...) this one will be able to be updated directly through the twrp app once the issue is fixed.
Click to expand...
Click to collapse
Without root then or is it always required for this app?

TheMRK said:
Without root then or is it always required for this app?
Click to expand...
Click to collapse
the app will always require root, but you can always use magisk with the certification bug fix and magisk hide so that you can have the device certified and still be rooted. (if you dont know what certification is used for, its to allways allow the usage of android pay)

Thanks for your work
The onely thing that doesn't work for me is OTG.

Stylogey said:
Thanks for your work
The onely thing that doesn't work for me is OTG.
Click to expand...
Click to collapse
Thanks for the log but next time use pastebin so you dont make a huge post (and i have copied the log and later on ill see it, so you can edit and delete the log from post so it doesnt fill the thread, thanks)

Good day!
My apologies as I am new to this, but I can't seem to find the link to the scatter file that you mention. Could you help me, please?
Thanks in advance, and sorry for the trouble.

CrimsonWind said:
Good day!
My apologies as I am new to this, but I can't seem to find the link to the scatter file that you mention. Could you help me, please?
Thanks in advance, and sorry for the trouble.
Click to expand...
Click to collapse
its available in any stock rom that is flashable with sp flash tools

You can try to compare your sources with those of Jonny. The TWRP versions which he build worked for me.
Edit: I tried to fix it by myself and after I used another kernel (Darksense kernel) as prebuild kernel it worked.

TheMRK said:
Great work, however, I can't find it in twrp app from playstore. Will this be updated soon?
What's the difference between an installation from twrp-App and flashtools?
Click to expand...
Click to collapse
Its updated, now its available on twrp app

Ruben Craveiro said:
Its updated, now its available on twrp app
Click to expand...
Click to collapse
That's great. I've just checked with my device and can verify it works well. Thanks for your efforts.

Ruben Craveiro said:
Its updated, now its available on twrp app
Click to expand...
Click to collapse
Works just perfectly. Good job with the app part, I had the app for a long time and our Elephone never apeared, now it is just perfect. Thanks

"Download scatter file attached to this post"
Where can I download the scatter file? There is no attachment.
Thank you!

mano2 said:
"Download scatter file attached to this post"
Where can I download the scatter file? There is no attachment.
Thank you!
Click to expand...
Click to collapse
sorry, didnt add it yet, and im away from a computer, just get the scatter file from any stock rom

Ruben Craveiro said:
sorry, didnt add it yet, and im away from a computer, just get the scatter file from any stock rom
Click to expand...
Click to collapse
I didn't quite understand what are scatter files for, now I did some research and downloaded the most up-to-date stock ROM and now everything is fine!
Thank you for your help!

[ROM][CrDroid][11][UNOFFICIAL][RAV*/SOFIA*][7.X]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
First time installation:
Flashing:
1. Extract the zip and open a shell with ADB and fastboot.
2. Reboot your device into fastbootd mode.
Code:
fastboot reboot fastboot
3. Flash boot, system, product, and vbmeta.
Code:
fastboot set_active a
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash product product.img
fastboot flash vbmeta vbmeta.img
4. Wipe userdata.
Code:
fastboot -w
Gapps:
1. Fastboot boot TWRP
2. Flash Gapps arch64 version 11
3. Reboot
Magisk:
1. Boot into TWRP
2. Flash Magisk vs. 21.1
3. Reboot
Sources:
ROM: https://github.com/crdroidandroid
Kernel: kernel https://github.com/Odin1101/Project-Sofia/tree/Upstream-test
Download: https://sourceforge.net/projects/crdroid-v7-x-sofiar/files/CrDroid-Sofiar/
Visit official website @ crDroid.net
crDroid <device> Telegram
crDroid Community Telegram
Donate to help our team pay server costs
Device support Telegram link: https://t.me/joinchat/0IkIqVQMwM45MDZh
Thanks to the following devs and contributors
@bcrichster
@Beetle84
@asineth
@gearsofwar567
@kjjjnob
Special thanks:
@vache

Any suggestions on where i would get the right gapps package?

Thornhammerr said:
Any suggestions on where i would get the right gapps package?
Click to expand...
Click to collapse
OpenGApps - Browse /arm64/test/20210130 at SourceForge.net
OpenGApps daily releases
sourceforge.net

Thanks fur(my phone must know I'm from the south) putting this together man. Looking forward to future builds, if you need anything in particular let me know.
Thanks again I'm off to check the g power forum. And maybe join those telegram groups

griz.droidx said:
Thanks fur(my phone must know I'm from the south) putting this together man. Looking forward to future builds, if you need anything in particular let me know.
Thanks again I'm off to check the g power forum. And maybe join those telegram groups
Click to expand...
Click to collapse
Well do you want me to make this official?

I'm about to flash your Custom ROM to my freshly bootloader unlocked MotoGStylus. Wish me luck, the whole thing sounds beautiful. I remember putting CrDroid on my ?MotoE6(Hannah)? Everyone at my school, and my close relatives that aren't techy labeled me as a ''Hacker'' when I did.. Lol Good times.. Whelp I'm ranting... Here goes attempt 1!

UprblyDunnoMe said:
I'm about to flash your Custom ROM to my freshly bootloader unlocked MotoGStylus. Wish me luck, the whole thing sounds beautiful. I remember putting CrDroid on my ?MotoE6(Hannah)? Everyone at my school, and my close relatives that aren't techy labeled me as a ''Hacker'' when I did.. Lol Good times.. Whelp I'm ranting... Here goes attempt 1!
Click to expand...
Click to collapse
Tell me how that went please.

Rondeau79 said:
Well do you want me to make this official?
Click to expand...
Click to collapse
Thanks for the work on the Rom! Does it have face unlock? also any plans on making it official?

Metconnect2000 said:
Thanks for the work on the Rom! Does it have face unlock? also any plans on making it official?
Click to expand...
Click to collapse
Face unlock is included in the ROM. Still debating on the official status part.

How can I flash this with TWRP?
(I am the fellow with no laptop from the other thread)

Mattswad said:
How can I flash this with TWRP?
(I am the fellow with no laptop from the other thread)
Click to expand...
Click to collapse
Download the proper zip file. Wipe data and cache. Flash zip file in TWRP, reboot recovery, flash Gapps(optional). Format data and reboot into system.

Rondeau79 said:
Download the proper zip file. Wipe data and cache. Flash zip file in TWRP, reboot recovery, flash Gapps(optional). Format data and reboot into system.
Click to expand...
Click to collapse
Thank you for your work and reply Robdeau79! I've already got the files downloaded and gonna give it a go tonight! Can't wait to put a custom rom on this!
So if I wanted to add magisk, do I do this after the steps gig mentioned? Do I need to reboot back into recovery after gapps to flash magisk?
I'm on 21 now and I accidentally "installed" magisk 22 but I haven't rebooted my phone yet in fear of bootlooping. I *think* Ive correctly backed up boot, dtbo and Vbmeta img files in case I have any issues.
Again, thanks for your help and your work and I will post the results when I work up the courage to a)reboot and b)flash!

Mattswad said:
Thank you for your work and reply Robdeau79! I've already got the files downloaded and gonna give it a go tonight! Can't wait to put a custom rom on this!
So if I wanted to add magisk, do I do this after the steps gig mentioned? Do I need to reboot back into recovery after gapps to flash magisk?
I'm on 21 now and I accidentally "installed" magisk 22 but I haven't rebooted my phone yet in fear of bootlooping. I *think* Ive correctly backed up boot, dtbo and Vbmeta img files in case I have any issues.
Again, thanks for your help and your work and I will post the results when I work up the courage to a)reboot and b)flash!
Click to expand...
Click to collapse
Download Magisk.zip and flash it in recovery. What version number it is really isn't an issue.

Thank you, I only brought it up as they changed from 2 separate files (1 zip to be flashed and a separate apk) to 1 single set up method from 21 to 22...as far as I understand.
I've never successfully performed a "nandroid" backup and freeing up space on my external sd has been what's taken up all my time but I'm gonna do it tonight I hope!

I'm getting an "Invalid zip file format! Error installing zip file...." message.
I downloaded several different roms and they all say that. I moved the files around to a different location in the external sd. No help.
I tried to rename the zip to an img inside of twrp (just to see if it would let me flash an image file) but it wouldn't let me rename it.

I cant get the rom to boot after installing gapps. Works great with out them though. Also as a sidenote anything bigger than the pico package will not install.

Mattswad said:
I'm getting an "Invalid zip file format! Error installing zip file...." message.
I downloaded several different roms and they all say that. I moved the files around to a different location in the external sd. No help.
I tried to rename the zip to an img inside of twrp (just to see if it would let me flash an image file) but it wouldn't let me rename it.
Click to expand...
Click to collapse
Check the OP and look for the Telegram device link.

zelot128 said:
I cant get the rom to boot after installing gapps. Works great with out them though. Also as a sidenote anything bigger than the pico package will not install.
Click to expand...
Click to collapse
Check the OP and look for the Telegram device link.

thanks

Rondeau79 said:
Well do you want me to make this official?
Click to expand...
Click to collapse
That's a question i can't answer. I'm still trying roms, but I can appreciate a stable rom also...lol