[SIZE=+2]This thread has been created
for
Questions & Answers/Troubleshooting[/SIZE][SIZE=+2]Specific to[/SIZE]
(SAMSUNG NOTE 3 SM-N900T)[/COLOR
I ave been looking on your site for a couple of weeks to learn how to determine the model of my note 3. here are the specs.
model-SM-N900T
android version-5.0
build number- LXR2 lV.N900TUVSFPH3
my phone has never been rooted and is totally stock lollipop.
i want to install TWRP but my model is not listed can someone point me in the right direction?
bb031577 said:
[SIZE=+2]This thread has been created
for
Questions & Answers/Troubleshooting[/SIZE][SIZE=+2]Specific to[/SIZE]
(SAMSUNG NOTE 3 SM-N900T)[/COLOR
I ave been looking on your site for a couple of weeks to learn how to determine the model of my note 3. here are the specs.
model-SM-N900T
android version-5.0
build number- LXR2 lV.N900TUVSFPH3
my phone has never been rooted and is totally stock lollipop.
i want to install TWRP but my model is not listed can someone point me in the right direction?
Click to expand...
Click to collapse
You need to root before you install TWRP. Be sure to root with CF-Auto-Root. After that, you can find TWRP for your device here: https://dl.twrp.me/hlte/
Thank you very much. Now do I root through oden or by memery card?
bb031577 said:
Thank you very much. Now do I root through oden or by memery card?
Click to expand...
Click to collapse
To flash with CF-Autoroot, you flash it with Odin. You can find detailed instructions on how to root here: https://forum.xda-developers.com/showthread.php?t=2672393
You can skip the first step and just follow the steps on how to flash with CF-Autoroot and how to flash TWRP
Follow instructions carefully
Good luck!
Root is not required to flash TWRP. You can flash TWRP from Odin and then flash supersu from TWRP to root the phone.
Rooting with cfautoroot will not install a custom recovery.
ShaDisNX255 said:
To flash with CF-Autoroot, you flash it with Odin. You can find detailed instructions on how to root here: https://forum.xda-developers.com/showthread.php?t=2672393
You can skip the first step and just follow the steps on how to flash with CF-Autoroot and how to flash TWRP
Follow instructions carefully
Good luck!
Click to expand...
Click to collapse
cf-autoroot will not install. i get error message, wrong_dev. i followed instuctions to exact.
bb031577 said:
cf-autoroot will not install. i get error message, wrong_dev. i followed instuctions to exact.
Click to expand...
Click to collapse
Be sure to have downloaded the correct cf-autoroot for N900T. Should be named something like this: "CF-Auto-Root-hltetmo-hltetmo-smn900t"
Thank you for the help you have been giving me. I was able to root my phone once I got the correct file. I have also installed twrp . Now I just need to find a good ROM to mess around with.
bb031577 said:
Thank you for the help you have been giving me. I was able to root my phone once I got the correct file. I have also installed twrp . Now I just need to find a good ROM to mess around with.
Click to expand...
Click to collapse
Glad to help. There are pretty good ROMs out there. I would suggest getting a Note7 port, since not only you get a newer version of Android, you get the very specific Note features which are awesome! Happy flashing!
Related
Howdy, I plan on rooting my tablet in a few days. The instructions say to root, then, flash stock recovery. Is flashing the stock recovery necessary if i plan on using goo to install twrp recovery prior to flashing cleanrom on my device?
Also, the cleanrom thread says to flash the appropriate version of twrp. Am I to assume the latest version on goo is the ticket for that?
Also, while the dev has indicated there will be further versions after 1.2, can I expect to simply download updates, or expect to flash new versions every time? I guess this particular question doesn't really matter I'm just interested.
And finally, has anybody used heimdall with any success with the p600? Google says no...
I would have posted this on the clean rom thread but was not allowed since I have not had enough posts yet. moving this to there would not hurt my feelings.
I appreciate any and all help and of course feel appreciation and give thanks to the developers who have put in such great effort. Thank you.
sleekmason said:
Howdy, I plan on rooting my tablet in a few days. The instructions say to root, then, flash stock recovery. Is flashing the stock recovery necessary if i plan on using goo to install twrp recovery prior to flashing cleanrom on my device?
Also, the cleanrom thread says to flash the appropriate version of twrp. Am I to assume the latest version on goo is the ticket for that?
Also, while the dev has indicated there will be further versions after 1.2, can I expect to simply download updates, or expect to flash new versions every time? I guess this particular question doesn't really matter I'm just interested.
And finally, has anybody used heimdall with any success with the p600? Google says no...
I would have posted this on the clean rom thread but was not allowed since I have not had enough posts yet. moving this to there would not hurt my feelings.
I appreciate any and all help and of course feel appreciation and give thanks to the developers who have put in such great effort. Thank you.
Click to expand...
Click to collapse
That's a lot questions! Lol.... here's two answers:
If you want to flash CleanRom, then you don't need to root your stock rom, just use Odin to flash TWRP and that will either let you install CleanRom or let you install SuperSU (root). You can the recovery from their website.
I'm on the P600 and the goomanager didn't install the recovery correctly, so I had to flash with odin.
I don't know about Heimdal. Good luck on your ten posts
Sent from my SM-P600
Odin eh?
grmcrkrs said:
That's a lot questions! Lol.... here's two answers:
If you want to flash CleanRom, then you don't need to root your stock rom, just use Odin to flash TWRP and that will either let you install CleanRom or let you install SuperSU (root). You can the recovery from their website.
I'm on the P600 and the goomanager didn't install the recovery correctly, so I had to flash with odin.
I don't know about Heimdal. Good luck on your ten posts
Sent from my SM-P600
Click to expand...
Click to collapse
My understanding is that root is neccesary to flash twrp. If that is not the case, they why use Odin at all?
Heimdall is a program reverse engineered to work on Samsung devices. Potentially more stable than odin. Open source. I use a linux box but will have access to a windows box in a week or so.
supersu
Furthermore, for verification, super su does not root your device, it only manages the permissions of those programs that need root access. Can somebody else chime in for verification?
sleekmason said:
Furthermore, for verification, super su does not root your device, it only manages the permissions of those programs that need root access. Can somebody else chime in for verification?
Click to expand...
Click to collapse
No, you CAN flash recovery without rooting, and if your not rooted then TWRP asks if you'd like to install SuperSU and root that way. I guess you don't have to believe me though
Sent from my SM-P600
grmcrkrs said:
No, you CAN flash recovery without rooting, and if your not rooted then TWRP asks if you'd like to install SuperSU and root that way. I guess you don't have to believe me though
Sent from my SM-P600
Click to expand...
Click to collapse
that sounds great but doesn't TWRP need root in order to be installed? my understanding is yes. If not I should be able to install it using Goo manager. from what I've read the developers for GooManager are very serious and would not allow a non working application to remain in their program.
sleekmason said:
Howdy, I plan on rooting my tablet in a few days. The instructions say to root, then, flash stock recovery. Is flashing the stock recovery necessary if i plan on using goo to install twrp recovery prior to flashing cleanrom on my device?
Also, the cleanrom thread says to flash the appropriate version of twrp. Am I to assume the latest version on goo is the ticket for that?
Also, while the dev has indicated there will be further versions after 1.2, can I expect to simply download updates, or expect to flash new versions every time? I guess this particular question doesn't really matter I'm just interested.
And finally, has anybody used heimdall with any success with the p600? Google says no...
I would have posted this on the clean rom thread but was not allowed since I have not had enough posts yet. moving this to there would not hurt my feelings.
I appreciate any and all help and of course feel appreciation and give thanks to the developers who have put in such great effort. Thank you.
Click to expand...
Click to collapse
You wont need to root if your intent is to just flash my ROM.
Appropriate version would be 2.6.3.3
As far as updates / patches... Depends on the issue. Mostly do full updates if something changes. If its a bug fix then I would just do a patch.
Hemidall? No, never tried it.
Basically to flash a custom ROM you just need to flash TWRP using Odin then flash the ROM using TWRP.
You dont techincally need to root unless you want to stay stock and have root. But that is no fun!
Also, the goo.im app does not work with this device so you have to use Odin manually (for simplicity).
Hope this helps!
sleekmason said:
that sounds great but doesn't TWRP need root in order to be installed? my understanding is yes. If not I should be able to install it using Goo manager. from what I've read the developers for GooManager are very serious and would not allow a non working application to remain in their program.
Click to expand...
Click to collapse
I read the TWRP thread, and others are having problems installing through goomanager. I also wanted to install it that way, but it wouldn't work. But it didnt work. It also wouldn't flash through the stock recovery. Hence, odin.
Sent from my SM-P600
thank you for the clarification! in order to flash TWRP in Odin do I simply use the AP slot as you would to flash autoroot by their directions?
one of the things thats tripped me up is that on the TWR P site as well as in Google Play it says you must have a rooted device. This would suggest that in order to get TWRP on your device it would already have to be rooted. it seems strange to me that the tablet will allow odin to install it on a non rooted device.
hoops I guess. So being a non Windows user, that is not familiar with the Windows operating system,( bet you don't hear that everyday) ,I would suppose the order would go something like this.
1 download Samsung drivers from kies.1
2. Download TWRP from site for odin.
3. Open odin.
4. go to download mode on device.
5. Plugin device and wait for it to be recognized.
6. Drag the Twrp zip for odin to the AP slot, enter,
7. Wait for it to .......?
8. Reboot.
9 download the cleanrom rom.
10. Reboot into recovery
11. Installcleanrom
12 enjoy.
a couple of other questions concerning the SD card. Should I leave it in during any or all of these processes? I've seen where other people have had problems with their SD card not being read is this due to it not being installed when they install clean rom? I really do appreciate all the help.
not breaking my device by doing something stupid is paramount. Lol! as I will be using my daughters computer any other information regarding the installation of the Samsung drivers or Odin would be much appreciated I do not want to hurt her computer.
I kept my SD card installed while flashing TWRP in Odin and had no problems. If you're worried then take it out. As far as Odin goes... run it as an admin and after connecting your Note (in DL mode) just click on "AP" and navigate to the directory where you saved the TWRP file. From there just hit "start" and your good to go. Odin isn't gonna mess anything up on your daughters pc and if you have a copy of the stock recovery just reflash it if you run into problems with TWRP. Also, read through all the different threads/watch YouTube videos. Most of this has been covered many times over and you can see what success or problems others have had.
Planning on rooting my P600 and after reading Hahahalalala's earlier post, will follow BeansTown106's instructions (http://forum.xda-developers.com/showthread.php?t=2490805).
It appears I need to flash from p600Autoroot.7z for v4.3 and CF-Auto-Root-lt03wifi-lt03wifixx-smp600.zip for v4.4? Please correct me if I'm wrong?!
On step 4, it says to "...flash the stock mj4 recovery provided". Planning on installing TWRP v2.7.1.0 - can I just do it here? Or do I need to do this step and afterwards install
TWRP (and flash Super SU)? I'm curious about the reason for flashing the stock recover and whether it's version specific...
Currently I'm at v4.3 (touchwiz) and haven't done the latest OTA yet (presumably it's v4.4.2). It'd be best to do the OTA update and then root, right? Reading the earlier post, it
appears this method works for v4.4...
While posting, also is it possible to downgrade back to v4.3 from v4.4? Not that I'm planning on it, but have read both yes and no on doing it and just wondered.
Thanks in advance and do advise if there's anything I should watch out for while doing this!!
wha2do said:
Planning on rooting my P600 and after reading Hahahalalala's earlier post, will follow BeansTown106's instructions (http://forum.xda-developers.com/showthread.php?t=2490805).
It appears I need to flash from p600Autoroot.7z for v4.3 and CF-Auto-Root-lt03wifi-lt03wifixx-smp600.zip for v4.4? Please correct me if I'm wrong?!
On step 4, it says to "...flash the stock mj4 recovery provided". Planning on installing TWRP v2.7.1.0 - can I just do it here? Or do I need to do this step and afterwards install
TWRP (and flash Super SU)? I'm curious about the reason for flashing the stock recover and whether it's version specific...
Currently I'm at v4.3 (touchwiz) and haven't done the latest OTA yet (presumably it's v4.4.2). It'd be best to do the OTA update and then root, right? Reading the earlier post, it
appears this method works for v4.4...
While posting, also is it possible to downgrade back to v4.3 from v4.4? Not that I'm planning on it, but have read both yes and no on doing it and just wondered.
Thanks in advance and do advise if there's anything I should watch out for while doing this!!
Click to expand...
Click to collapse
1) If you flash twrp then you can't do OTA any more
2) The root instruction would work but will trip the Knox and void warranty.
3) Not possible to downgrade back to 4.3
4) if you not use twrp but reflash stock recovery image then OTA would work but will wipe out root if you take the OTA upgrade what ever that maybe 4.4.3?
wha2do said:
Planning on rooting my P600 and after reading Hahahalalala's earlier post, will follow BeansTown106's instructions (http://forum.xda-developers.com/showthread.php?t=2490805).
It appears I need to flash from p600Autoroot.7z for v4.3 and CF-Auto-Root-lt03wifi-lt03wifixx-smp600.zip for v4.4? Please correct me if I'm wrong?!
On step 4, it says to "...flash the stock mj4 recovery provided". Planning on installing TWRP v2.7.1.0 - can I just do it here? Or do I need to do this step and afterwards install
TWRP (and flash Super SU)? I'm curious about the reason for flashing the stock recover and whether it's version specific...
Click to expand...
Click to collapse
I used these full instructions for Kit-Kat: http://forum.xda-developers.com/showthread.php?t=2719750
One step in that is the CF-autoroot, but there are other steps as well. I just ignored the "To Flash New Update" part, but maybe you need it. I was already on the latest OTA before I started. Trips knox but I'm sure you knew that.
buhohitr said:
1) If you flash twrp then you can't do OTA any more
2) The root instruction would work but will trip the Knox and void warranty.
3) Not possible to downgrade back to 4.3
4) if you not use twrp but reflash stock recovery image then OTA would work but will wipe out root if you take the OTA upgrade what ever that maybe 4.4.3?
Click to expand...
Click to collapse
1) That's why I figured best to do the OTA first - just had other devices that didn't have root methods for the newest update & wanted to thought best to ask first!
2) I'm out of warranty (due to drop and repaired screen) so warranty is of no issue...but thanks for the warning
3) Thought that to be the case, but again hearing it may be possible and also can't. Don't foresee doing it, but was curious...
4) Plan on flashing the latest (CF-Auto-Root-lt03wifi-lt03wifixx-smp600.tar.md5) via odin, reboot, flash twrp v2.6.x as I hear 2.7.x may have a few issues. Only problems I've read are potential with Super SU - not sure if it's part of the root flash, needs to be flashed
separately, or just dl'd from Google Play Store? Guess will just flash root, see if app is there, if not try Play Store. If not, then go back and find the flashable SU dl.
Thanks!
deV14nt said:
I used these full instructions for Kit-Kat: http://forum.xda-developers.com/showthread.php?t=2719750
One step in that is the CF-autoroot, but there are other steps as well. I just ignored the "To Flash New Update" part, but maybe you need it. I was already on the latest OTA before I started. Trips knox but I'm sure you knew that.
Click to expand...
Click to collapse
Thanks! Yep, not concerned about warranty at this point... And figure will do the OTA and then root...
Actually latest posts appear to show some issues with SU when using CF-autoroot (maybe due to them being on kitkat?). Appears flashing CF-Auto-Root-lt03wifi-lt03wifixx-smp600.tar.md5 does the trick. Sounding like it's part
of the flash, and can then just flash twrp (figuring be safe with v2.6.x for now).
If not reading this right, anyone feel free to correct me before I "jump", lol!
wha2do said:
Thanks! Yep, not concerned about warranty at this point... And figure will do the OTA and then root...
Actually latest posts appear to show some issues with SU when using CF-autoroot (maybe due to them being on kitkat?). Appears flashing CF-Auto-Root-lt03wifi-lt03wifixx-smp600.tar.md5 does the trick. Sounding like it's part
of the flash, and can then just flash twrp (figuring be safe with v2.6.x for now).
If not reading this right, anyone feel free to correct me before I "jump", lol!
Click to expand...
Click to collapse
Su is fine with me after cf root.
In my signature is a guide to rooting with kitkat (second post)
Follow that and you'll be good : good:
Sent from my Nexus 4 using Tapatalk
wha2do said:
1) That's why I figured best to do the OTA first - just had other devices that didn't have root methods for the newest update & wanted to thought best to ask first!
2) I'm out of warranty (due to drop and repaired screen) so warranty is of no issue...but thanks for the warning
3) Thought that to be the case, but again hearing it may be possible and also can't. Don't foresee doing it, but was curious...
4) Plan on flashing the latest (CF-Auto-Root-lt03wifi-lt03wifixx-smp600.tar.md5) via odin, reboot, flash twrp v2.6.x as I hear 2.7.x may have a few issues. Only problems I've read are potential with Super SU - not sure if it's part of the root flash, needs to be flashed
separately, or just dl'd from Google Play Store? Guess will just flash root, see if app is there, if not try Play Store. If not, then go back and find the flashable SU dl.
Thanks!
Click to expand...
Click to collapse
Yeah you want TWRP 2.6.3.3. It won't work right with 2.7.x. Might as well flash the SuperSU. Most of the root apps worked fine but Viper4Androod did not find Busybox even after using the installer. Need to go back a version of V4A too due to bugs but it still didn't work. Tried freezing Knox apps that might be interfering but eventually just installed that MagazineUX ROM and now it works. Everything else should work easier.
22sl22 said:
Su is fine with me after cf root.
In my signature is a guide to rooting with kitkat (second post)
Follow that and you'll be good : good:
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Thanks - that was the post had been reading through - appears after the kitkat OTA, latest posts mentioned problems with SU when running the original CF-AUTO Root method (flashing autorootp600mj4.tar.md5). Wondering if flashing the "newer" CF-Auto-Root-lt03wifi-lt03wifixx-smp600.tar.md5
would be best. At this point feel confident either way!
deV14nt said:
Yeah you want TWRP 2.6.3.3. It won't work right with 2.7.x. Might as well flash the SuperSU. Most of the root apps worked fine but Viper4Androod did not find Busybox even after using the installer. Need to go back a version of V4A too due to bugs but it still didn't work. Tried freezing Knox apps that might be interfering but eventually just installed that MagazineUX ROM and now it works. Everything else should work easier.
Click to expand...
Click to collapse
Yep, will be downloading TWRP v2.6.3.3 and flash it and SuperSU after rooting. After rooting, will be curious to see where I sit with superuser (sorry, reading the latest posts kind of muddy whether a SU app is already installed or not, lol)...
Thanks everyone for all the great input & help!!
I recently updated to the new fw bol1 im just wondering if there is any way to root the phone or downgrade ?
Sebby000 said:
I recently updated to the new fw bol1 im just wondering if there is any way to root the phone or downgrade ?
Click to expand...
Click to collapse
This is from the Renegade Rom page on Android Development, IT WORKS EVEN IF YOU ARE ON BOL1.
Start with step 5
Proper flashing/upgrading to this ROM.. IF you're thinking about flashing OJ7 Roms, take note of the following:
First, Make a TWRP backup
Make a Titanium backup and Backup your Files to PC (i.e. DCIM/Downloads/SMS/TWRP) as you might have to factory full wipe if no boot after ODIN!! Yes no more pictures of your cat Fluffy
ODIN OJ7 Full Update/Firmware Click Here.
After returning to STOCK - bootup and go to software update and take ANY OTA
{{START HERE WITH A NEW PHONE}}{{START HERE IF YOU'RE ALREADY ON OI1}}
Go to Settings--->About Device--->Tap "Build Number" 10 times and you will unlock Developer Options---> unlock bootloader (See Attachment)
Flash THIS TWRP in Odin (compatible with 5.1.1 OFE and up) and you will be good to go with root+recovery on 5.1.1!!
Boot into TWRP; Wipe (Cache,Dalvik,System); Flash a RENEGADE OJ7-V1 Rom
Finally done!! Now you get all the juiciness of the Renegade work and any mods.
Depending on your install method... The initial boot WILL take up to 10 minutes on a clean install, SO PLEASE BE PATIENT!!!!
Please check post 2 and 3 if you're having issues or questions after flashing a Rom
veri nica, ty
Sebby000 said:
I recently updated to the new fw bol1 im just wondering if there is any way to root the phone or downgrade ?
Click to expand...
Click to collapse
Have you had success with getting root on OL1 following the steps suggested above?
exeleon said:
Have you had success with getting root on OL1 following the steps suggested above?
Click to expand...
Click to collapse
Yes, I installed Renegade rom over OL1 and it works without a problem after 4 days or so. You can even use GalaxyTools to get hotspot access, good battery life also.
thanks for the helps guys but i just wanted to root my phone to use HOTSPOT but i figure it out how to do it without root access just changed the APN SETTING AND ADD .dun at the end and it works
Hello all,
I have searched and searched, and I can't find a clear answer as to what I need to do. I converted my retail verizon note 4 a few months ago as soon as a permanent root method was discovered.
here's what i'm on right now.
5.1.1
N910VVRU2BPA1
TWRP 3.0.2
I'm trying to install this ROM
http://forum.xda-developers.com/note-4-verizon/development/rom-paulpizz-rom-t3360469
the instructions say
Make sure your rooted and have a custom recovery installed on VRU2CPD1 Firmware --> GO HERE For upgrade Instructions --> Thanks @hsbadr
I clicked on the link and the instructions seem to be for rooting and installing a recovery for the first time... I'm already rooted though.
Can't I just install a new firmware and ROM through TWRP?
Thanks!
jtadeo said:
Hello all,
I have searched and searched, and I can't find a clear answer as to what I need to do. I converted my retail verizon note 4 a few months ago as soon as a permanent root method was discovered.
here's what i'm on right now.
5.1.1
N910VVRU2BPA1
TWRP 3.0.2
I'm trying to install this ROM
http://forum.xda-developers.com/note-4-verizon/development/rom-paulpizz-rom-t3360469
the instructions say
Make sure your rooted and have a custom recovery installed on VRU2CPD1 Firmware --> GO HERE For upgrade Instructions --> Thanks @hsbadr
I clicked on the link and the instructions seem to be for rooting and installing a recovery for the first time... I'm already rooted though.
Can't I just install a new firmware and ROM through TWRP?
Thanks!
Click to expand...
Click to collapse
This process will upgrade your boot loader. Follow the instructions, it is required for most MM ROMs.
xBlu3 said:
This process will upgrade your boot loader. Follow the instructions, it is required for most MM ROMs.
Click to expand...
Click to collapse
thanks, man.
I'm on MM now
I am considering buying S7 Active, and I have a question about rooting.
I will buy one on ebay, I'm not sure which firmware it will be on.
What is the latest rom that can be rooted, and how can I download that rom? There is no combined guide and it is a little confusing. Once I root my phone I usually use it until I replace my phone, so I would like to get to the latest.
Also how do I root the phone? Do I still need to follow the post?
https://forum.xda-developers.com/s7-active/help/samsung-galaxy-s7-active-root-t3473649
Thank you in advance!
all version are rootable...
that link althou starts out as links to android 6... ends up on 7 at around #700
there is no recovery like twrp,.. but yes they all got root ....
if not follow rom modder thread tut, up to flashfire if you only want root
miniminus said:
all version are rootable...
that link althou starts out as links to android 6... ends up on 7 at around #700
there is no recovery like twrp,.. but yes they all got root ....
if not follow rom modder thread tut, uo
p to flashfire if you only want root
Click to expand...
Click to collapse
Thank you for the reply.
I couldn't understand some parts of your comment... So the latest firmware is still rootable using the method in the above link? Then how can I obtain and flash the latest firmware? I'll not use the phone on AT&T.
Also I couldn't understand the last line of your comment... what did you mean?
think its oulined in the main thread you posted ...
but use this site ..
https://cloud.mail.ru/public/BGy7/gKs4xzhRE/
which has all the 'update' zips, of which you can use in normal stock recovery and load up via memorycard
is a slow process, and wipes everthing (you can stop it before it does, but you gotta be ready, so make backup anyhows !!)
miniminus said:
think its oulined in the main thread you posted ...
but use this site ..
https://cloud.mail.ru/public/BGy7/gKs4xzhRE/
which has all the 'update' zips, of which you can use in normal stock recovery and load up via memorycard
is a slow process, and wipes everthing (you can stop it before it does, but you gotta be ready, so make backup anyhows !!)
Click to expand...
Click to collapse
Thank you for the link! QF2 seems to be the most recent one. I will follow the steps when I get the phone.
EDIT: someone said QF2 is not rootable yet... is it still the case? Then I may have to go for QE1.
well people had issues at the start, as i think they was not using the most recent (2.82) root methods...
but people on the Ufirm Rom modder thread ARE rooted on QF2...
miniminus said:
well people had issues at the start, as i think they was not using the most recent (2.82) root methods...
but people on the Ufirm Rom modder thread ARE rooted on QF2...
Click to expand...
Click to collapse
Ummmm... sorry but what is the 2.82 root method? Is it different from the above method?
2.82 is the newest version of SuperSU which provides you root privileges, and thus the version of 'root.bat' that you run (on your PC with phone connected, with ADB USB debugging enabled in Developer mode)
AFTER you flash the Eng.Boot file (teh engineering boot image that you flash with Odin, while phones in 'download' mode)
miniminus said:
2.82 is the newest version of SuperSU which provides you root privileges, and thus the version of 'root.bat' that you run (on your PC with phone connected, with ADB USB debugging enabled in Developer mode)
AFTER you flash the Eng.Boot file (teh engineering boot image that you flash with Odin, while phones in 'download' mode)
Click to expand...
Click to collapse
Thanks. The post explains based on 2.76, I should do some research how to do that with ver 2.82 when I get the phone.