Cannot get to download mode. Phone working fine. - G3 Q&A, Help & Troubleshooting

I want to flash a custom rom but unable to install recovery because I'm on Android 6.0 and have no root.
Tried to root with 1 click but realized later that it doesn't work with 6.0
So now I'm following a procedure to downgrade to Android 5 but unable to get into download.
When I press volume up and plug in the phone it shows me a screen with a white phone and yellow triangle like this one (https://images-na.ssl-images-amazon.com/images/I/61JPlI0IYWL._SL256_.jpg).
Also when I try to do it through "adb reboot download" the phone just reboots and goes back to OS.
What are my options here?
Thank you in advance.

pashunka said:
I want to flash a custom rom but unable to install recovery because I'm on Android 6.0 and have no root.
Tried to root with 1 click but realized later that it doesn't work with 6.0
So now I'm following a procedure to downgrade to Android 5 but unable to get into download.
When I press volume up and plug in the phone it shows me a screen with a white phone and yellow triangle like this one (https://images-na.ssl-images-amazon.com/images/I/61JPlI0IYWL._SL256_.jpg).
Also when I try to do it through "adb reboot download" the phone just reboots and goes back to OS.
What are my options here?
Thank you in advance.
Click to expand...
Click to collapse
First of all could you please tell me what LG G3 Model are you?(example: D855)and also what "V" (version) of Marshmallow (example:v30c).
They are needed to proceed at downgrading or even rooting immediately without downgrading.(KingRoot is the one that is working well)

Sotiris02 said:
First of all could you please tell me what LG G3 Model are you?(example: D855)and also what "V" (version) of Marshmallow (example:v30c).
They are needed to proceed at downgrading or even rooting immediately without downgrading.(KingRoot is the one that is working well)
Click to expand...
Click to collapse
Hey
Thanks for quick reply.
It's D852
Software verion: D85230d
Android 6.0
Kernel 3.4.0
I hope this is what you need

pashunka said:
Hey
Thanks for quick reply.
It's D852
Software verion: D85230d
Android 6.0
Kernel 3.4.0
I hope this is what you need
Click to expand...
Click to collapse
Did you try installing "King Root"( NOT "Kingo Root"!)to your Device?
If you've downloaded king root and it didn't give a positive answer then downgrade will be required to Root.
Downgrading Guide​
Not necessary
Before starting you may need to backup your photos,etc.
Go to Settings then "Backup and Reset" then you will see "LG Backup" click on it and make the backup.After all these steps move your backup file to your SD Card or to your PC.(Go to File Explorer then to the folder "LG backups")
So let's go on..!
Go here and select the one of them(they are the same) But if you already have a kdz file then bypass his
http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/Canada+D852/MM+6.0/
Then go over here
http://forum.xda-developers.com/showthread.php?t=2785089
And scroll down to "How to flash ROM kdz method"
Enable USB debugging
https://www.recovery-android.com/enable-usb-debugging-on-android.html#part1
Connect your phone to your PC
Download LG drivers(Not Verizon one's!)
Download Lguptool, unzip it,open the folder and inside of it where all the lguptool files are located move the kdz file that you downloaded.
Open lguptool with admin prompt!
Select type CMDA and phone mode DIAG
Select the kdz file and click "CSE Flash"
Then click "start"
A menu will appear,select language and click "Ok"
After all these steps you will need to wait till the phone boots.
Then you will be able to root your phone(King root) and flash TWRP and ROMs!
If you also want a guide on how to get SuperSU after getting Root access from King Root,then just tell me and I'll reply as fast as i can.
Greetings and Good luck!

Thank you! I will try this right now.
But this KBZ file is for MM no? Wouldn't I need one for Lollipop?

pashunka said:
Thank you! I will try this right now.
But this KBZ file is for MM no? Wouldn't I need one for Lollipop?
Click to expand...
Click to collapse
It's Marshmallow one.Because "v30b" of marshmallow is Rootable.

Sotiris02 said:
It's Marshmallow one.Because "v30b" of marshmallow is Rootable.
Click to expand...
Click to collapse
OK that makes sense.
I tried the KingRoot but no luck, so will try the second method.
I'm having issues with windows recognizing my phone... says "usb device descriptor request failed". I tried installing/reinstalling LG drivers, still have issues. Funny thing is it worked not too long ago... Same happens on another Win10 machine.
Once I figure it out I will try your 2nd method.
Thanks a lot!

Sotiris02 said:
It's Marshmallow one.Because "v30b" of marshmallow is Rootable.
Click to expand...
Click to collapse
Looks like I still have issues with USB. I finally got it to recognize the device but when LGUP reboots the phone it again says "device not recognized".... no clue what the problem with USB is...

pashunka said:
Looks like I still have issues with USB. I finally got it to recognize the device but when LGUP reboots the phone it again says "device not recognized".... no clue what the problem with USB is...
Click to expand...
Click to collapse
The phone boots or not?
Windows 10 have always been problematic...(program error's etc etc.)That's why i stick on Windows 7 ultimate
Don't you have a "Internet cafe" or a place where you can use a PC nearby(that hasWindows 7.)

Sotiris02 said:
The phone boots or not?
Windows 10 have always been problematic...(program error's etc etc.)That's why i stick on Windows 7 ultimate
Don't you have a "Internet cafe" or a place where you can use a PC nearby(that hasWindows 7.)
Click to expand...
Click to collapse
Yeah the phone works fine. It is Windows 10...
I might install W7 quickly to try it...

Sotiris02 said:
It's Marshmallow one.Because "v30b" of marshmallow is Rootable.
Click to expand...
Click to collapse
So I finally made it work, there was a problem with USB port on the phone.
Now how do I reboot to recovery?
I rooted with KingRoot and installed SuperSU from play market and TWRP recovery from the app.
When I reboot it doesn't go to recovery, I assume because KingRoot gives temp root? I downloaded reboot app to go to recovery but when it reboots it just flashed the LED light.

pashunka said:
So I finally made it work, there was a problem with USB port on the phone.
Now how do I reboot to recovery?
I rooted with KingRoot and installed SuperSU from play market and TWRP recovery from the app.
When I reboot it doesn't go to recovery, I assume because KingRoot gives temp root? I downloaded reboot app to go to recovery but when it reboots it just flashed the LED light.
Click to expand...
Click to collapse
FYI,
I tried this so far with no luck:
1) Tried this script. It removed KingRoot and at the end when it installs SuperSU it fails to update binaries. Tried this multiple times
2) Installed Super-Sume app but it just sits and does nothing. Tried different versions.
3) I read that there is AutoRec for D852 but the link does not work and I can't find a copy (https://forum.xda-developers.com/lg-g3/general/apk-flash-twrp-autorec-thanks-to-t3081396)
Do I even need to install SuperSU? I just want to flash a different ROM but cannot get into recovery because Kingroot is temporary.

So I gave up on KingRoot.
Just downgraded with LGUP using old .TOT Lollipop file, rooted and installed custom ROM.

Related

[Q] Unable to root Sprint G2

I restored a TOT file using lgflashtool to go back to stock ZVE (previously rooted with TWRP), then ADB sideloaded to ZVG. Everything is working fine, but I can't root. I have tried the LG One Click Root (both 1.2 and 1.3) and one from highonandroid but it didn't work either. I have followed the directions exactly, enabling USB debugging and I run as admin. I am succesfully able to get the phone into download mode as well, so that is not a problem. Any ideas? I have searched this forum and didn't see anybody having problems with it so sorry if this is repeated information.
try the script method?
Hey I too have been struggling with the root via one click .. I would be good until the script would be waiting for device and download mode. I eventually uninstalled all the lg drivers and root programs I had installed. Then rebooted computer, reinstalled lg driver and ran the lg root script version 1.2, run the program and be patient. it may take up to five minutes then it will tell you to put the phone in down load mode and reconnect. It recognized the phone immediately and then I waited and waited and waited, then finally the su script completed and then the prompt was to press control+C and then N and reboot. maybe it will work for you but this is where im getting stuck.. good luck if any of this helps.
The graphic interface version worked for me. In download mode make sure it finds it on the correct Port.
If not change it in device settings.
Mine would progress to 90%and stick. After 5 minutes I disconnect, reboot phone and root was there.
Do you know what port the gui looks for the device on by default? Maybe i can assign the port befor executing the gui script.
Did you try stump root? That one worked for me on ZVE.
i
I was able to gain root by one click it would detect my phone try to reboot it in download mode but It wouldn't go into download mode if it makes it that far let it sit there rebooted and ui on computer will ask u to put it in dl mode manually. As for the port I used 41 as if I was doing a tot. Restore I can go into more detail if this is the same issue u r having
Yup. Stump dosent work on zvg. I've installed it despite what I've read and tried it. It tells me. Out says I'm already rooted, but super user tells me I'm not rooted.
Dopamin3 said:
I restored a TOT file using lgflashtool to go back to stock ZVE (previously rooted with TWRP), then ADB sideloaded to ZVG. Everything is working fine, but I can't root. I have tried the LG One Click Root (both 1.2 and 1.3) and one from highonandroid but it didn't work either. I have followed the directions exactly, enabling USB debugging and I run as admin. I am succesfully able to get the phone into download mode as well, so that is not a problem. Any ideas? I have searched this forum and didn't see anybody having problems with it so sorry if this is repeated information.
Click to expand...
Click to collapse
Maybe you should try this method. Restore to ZVE and rootz it with Lg one click v1.2. Once you confirmed it's rooted, then adb sideload on stock recovery to upgrade to ZVG. When you upgraded to zvg, try the Lg one click root v1.2 again Usually, that Lg One click root v1.2 will stuck on and take awhile, but it did it's job. Also to change the port number after used the LgFlashtool. Alot time, the port 41 don't work with Lg one click root.
Port 41works for mine

Sprint lg g2 ls980 unlock tm/att/inter easy fast works 100%!!!!

everything ON YOUR LG G2 WILL BE DELETED
I AM ALSO HAVE THE UNLOCK FOR THE LG G3 LS990 HERE
AND THE
SPRINT S4 L720/T HERE
THIS MAY LOOK LONG BUT ITS STEP BY STEP FOR NONE ADVANCED PEOPLE
everything you do will be own your own responsibility but nothing should go wrong if you follow step by step and DONT SKIP ANY STEP
you should be able to use any carrier at H+ speed .
you cant use 4G because of the phone modem chip its not powerful.
ALSO HERE A VIDEO TO SHOW YOU HOW TO DO IT:
https://www.youtube.com/watch?v=FGQ2aGlumWs
IF YOU ARE ALREADY ON LS980ZV7 SKIP PART 1.
PART 1:first you will need some files on you computer you will needs these for part 1.
1.LG Drivers
2.TOT FLASH TOOL / MEGALOCK
3.ls980zv7.zip / ls980.dll
PART 2:then you will need some files on your device these for part 2 which is the unlocking process(dont transfer these file to the device until you are done with the flashing with the lg tool.because that will reset the device and then you have to transfer them again)
1.Autorec.apk
2.towelroot-offline.apk
3.LG2 Rom
PART 1 :first install the drivers then extract the tot from the ls980zva.zip then install the flash tool then take the megalock.dll and put it in the program file folder for the lg flash tool then launch the lg g tool in the place where is says select dll click the 3 dots ... then select the ls980.dll and in the place where it says s/w click add the file that you have extracted ls980zv7.tot then click board dl then click OK , after that click the yellow arrow then wait for the loading to finish.
now go to the phone and turn it off.
now hold the vol+ on the phone and connect the computer it should show downloading.
now right click on my computer and choose properties, now click device manager then click ports and select the lone that have lg in the name click properties then click port settings and click advanced then change port to COM41.
now it should start restoring on the software.
wait until its done.
if it fails after the download then its okay it should go to testing mode then hold the vol+ and power and tap normal boot.
if it dose not go to testing mode and just comes on,its OK.
END OF PART 1.
PART 2(THE UNLOCKING PROCESS) Put all 3 the files on the device now
OK now install towel root offline and root the phone.
and then install Autorect.apk and install click install recovery then click reboot to recovery
it should reboot to TWRP
now click wipe then factory reset then click advanced wipe and select system,cache (ONLY).
then swipe to reset.
now click the home button on the bottom and click install now
and now select the ls980.zip that you have downloaded and swipe to flash it.
now go throw the installment screen.
and it will ask you to choose between TM,ATT,lg original.
it dose not matter which one you choose all will work but its better because if you select TM all the TM apps will install and if you select ATT all ATT apps will install if you select original then none of the extra features of ATT or TM will install.
now after you are done just click finish and the phone should reboot.
CONGRATS!!!!!!!!!!
NOW YOU PHONE IS UNLOCKED
IF YOU WANT TO GO BACK TO SPRINT JUST DO STEP 1 AGAIN
NOW PLEASE CLICK THAT THANKS BUTTON AND PLEASE DONATE
paypal:[email protected]
AND DONT FORGET TO THUMBS UP AND THANKS
THANKS AND YOU WELCOME
​
Thanks for the detailed instruction.
However, we are unable to access .
1. Autorec.apk
2.towelroot-offline.apk
3.LG2 Rom
Could you please provide the link, or the version, especially for LG2 Rom?
Done!!!!!!!!!!!!!! Try now
thanks.
I am able to go through every steps. However, after installed the new rom in twrp, and rebooted, the system enters into loops, i.e. logo appears and disappears, no other action.
is there particular selection necessary during the installation process in twrp?
Please wait you will need to flash the tot again but the one I had was the wrong version please wait for a very soon update
reaady
its all ready to go now i had the wrong version it is ls980zv7 not ls980zva sorry now try from step one ​
Great Thanks to your instruction. It finally works.
This is the best, reliable instruction for the current sprint LG LG phone. Not too much work need to be done.
which android version? lollipop?
does that imply that phone will stay on zv7? Will it be possible to update firmware to lollipop?
It's is 4.2.2 and no you can not upgrade because if you do you will lose the unlock .
Guys just stick with it at least you are able to unlock your phone
main archive is corrupted
Getting a "Failed" error
Whenever I load the .tot and .dll file and run the check using the LG Flash Tool I receive the following error: Failed Previous Load()
It is still working? Anyone from outside US tryed this?
What about mobile data?
Haha yes. Made it work on US T-Mobile. Thanks!
My LS980 is currently on ZVG. Would this method work for sim unlocking? Also, once unlocked, it's possible to flash other ROMs? Thanks!
The download links are already expired.
yess done flash :cyclops:
Hi I just flashed and all worked fine. Trying to run a LG in India on airtel. However, the messages APP always crashes due to which I am unable to get APN settings and run mobile dat. Any clues or suggestions for it ?
By the way, thanks a lot for the awesome work you have done. Really made my day...
pranavvij said:
Hi I just flashed and all worked fine. Trying to run a LG in India on airtel. However, the messages APP always crashes due to which I am unable to get APN settings and run mobile dat. Any clues or suggestions for it ?
By the way, thanks a lot for the awesome work you have done. Really made my day...
Click to expand...
Click to collapse
This unlock is garnered for us only
How can i go back to stock ls980 ....when i flash the tot file of ls980 with lg flash tool it says wrong version your device is d802....plz help me how can i go back to stock rom of lg g2 ls980

[solved] D855 Softbrick - need help - DL mode working but no succesful flash

Hey guys, I need your help!
I tried to make my long story short, but that didn't work, so here's my complete story:
When everything was fine, I had CM13 running with TWRP 2.8.5.0.
My first intention was to restore a Stock 4.4 Backup and update it to 5.x. After restoring it didn't boot, so I did a factory reset and it worked.
Next I wanted to update to 5.0 via OTA, but that ofc couldn't work because of TWRP.
I knew the only way to update to 5.x was to flash a .kdz an lose all data. I didn't want to do that, so instead I tried to flash the official 30B image from here.
I followed the instructions given in the first post (updated TWRP to 2.8.7.0 too), but after flashing the files and hitting the "reboot system" button in TWRP it booted into TWRP again. I tried flashing again because maybe something went wrong. I even downloaded all the files again to make sure I didn't have a bad download, but no luck. So I restored the previous CM13 6.0.1 rom. At first it didn't succeed because my internal memory was full, but after deleting the 30B files it restored just fine. So when it was ready I hit the reboot button aaaannd it booted into TWRP AGAIN...
I searched the internet and found a "LG_G3_Flash2FixStuckRecovery.zip" file, but that didn't help either. (I connected my G3 to my pc using MTP in TWRP to backup all important data, so I don't care if I need to wipe everything.)
Now I knew something went badly wrong and tried using the LG flashtool 2014 for .kdz and another one for .tot files to recover my G3.
Still no luck. When using the 2014 tool and the official 30B kdz it runs till 100% at my phone (at the same time it reaches 80% on my pc at the LG mobile support tool). But then it's only showing the LG logo for some seconds, screen black, lg logo, black, ... an infinite loop.
When using the .tot method I can't get past the "Model Information Check FAIL!" message. It looks like I lost my IMEI because it shows "IMEI: NULL". I got an EFS Backup in a zip file though, so it's not completely lost. I tried both methods on 2 different pc's with win 8.1 and 7 (and win10 for some things), but I always get the same results.
When turning it on using the power button, I see the LG logo followed by a black screen and again the LG logo.
When connecting it to the charger I at first see a charging screen, not the charging animation, but the "loading" battery screen you get before the animation. But after it I get stuck in the above mentioned LG logo.
It's possible to get to the factory reset screen, but I get to the LG logo again after "performing" a factory reset. Note: On the factory reset screen, there is a blue "part" on the top of the screen which looks different compared to when using CM13 and Stock 4.4. The blue color is darker, so I guess, I partly got 30B installed.
I didn't plan to write that much, but I think it's better because I described almost everything I did.
I have no idea what to do now, I tried everything I know and could find on the internet.
So I just hope someone is able to help me getting my G3 working again.
Many thanks!
tl;dr: Only download mode left, but can't succesfully flash any stock rom.
Now... what do u want.... ????
Downgrade from mm to lollipop.... right????
... I can help you... by teamview. Ok
reepje123 said:
Hey guys, I need your help!
I tried to make my long story short, but that didn't work, so here's my complete story:
When everything was fine, I had CM13 running with TWRP 2.8.5.0.
My first intention was to restore a Stock 4.4 Backup and update it to 5.x. After restoring it didn't boot, so I did a factory reset and it worked.
Next I wanted to update to 5.0 via OTA, but that ofc couldn't work because of TWRP.
I knew the only way to update to 5.x was to flash a .kdz an lose all data. I didn't want to do that, so instead I tried to flash the official 30B image from here.
I followed the instructions given in the first post (updated TWRP to 2.8.7.0 too), but after flashing the files and hitting the "reboot system" button in TWRP it booted into TWRP again. I tried flashing again because maybe something went wrong. I even downloaded all the files again to make sure I didn't have a bad download, but no luck. So I restored the previous CM13 6.0.1 rom. At first it didn't succeed because my internal memory was full, but after deleting the 30B files it restored just fine. So when it was ready I hit the reboot button aaaannd it booted into TWRP AGAIN...
I searched the internet and found a "LG_G3_Flash2FixStuckRecovery.zip" file, but that didn't help either. (I connected my G3 to my pc using MTP in TWRP to backup all important data, so I don't care if I need to wipe everything.)
Now I knew something went badly wrong and tried using the LG flashtool 2014 for .kdz and another one for .tot files to recover my G3.
Still no luck. When using the 2014 tool and the official 30B kdz it runs till 100% at my phone (at the same time it reaches 80% on my pc at the LG mobile support tool). But then it's only showing the LG logo for some seconds, screen black, lg logo, black, ... an infinite loop.
When using the .tot method I can't get past the "Model Information Check FAIL!" message. It looks like I lost my IMEI because it shows "IMEI: NULL". I got an EFS Backup in a zip file though, so it's not completely lost. I tried both methods on 2 different pc's with win 8.1 and 7 (and win10 for some things), but I always get the same results.
When turning it on using the power button, I see the LG logo followed by a black screen and again the LG logo.
When connecting it to the charger I at first see a charging screen, not the charging animation, but the "loading" battery screen you get before the animation. But after it I get stuck in the above mentioned LG logo.
I didn't plan to write that much, but I think it's better because I described almost everything I did.
I have no idea what to do now, I tried everything I know and could find on the internet.
So I just hope someone is able to help me.
Many thanks!
tl;dr: Only download mode left, but can't succesfully flash any stock rom.
Click to expand...
Click to collapse
Did you try other version frimwares then 30B because mabye that will work
SpaceRaider said:
Did you try other version frimwares then 30B because mabye that will work
Click to expand...
Click to collapse
Waiting for rom then 30B... how long....???
mchiensd said:
Waiting for rom then 30B... how long....???
Click to expand...
Click to collapse
What do you mean?
mchiensd said:
Now... what do u want.... ????
Click to expand...
Click to collapse
I just want to get my G3 working again, doesn't matter if stock or CM rom
SpaceRaider said:
Did you try other version frimwares then 30B because mabye that will work
Click to expand...
Click to collapse
I tried 21A .kdz and 10E or .tot. When using 21A kdz it gives an error. It tells me something like connect my phone again and try again. Only the 30B was kinda flashable.
mchiensd said:
Waiting for rom then 30B... how long....???
Click to expand...
Click to collapse
Ehm what?
SpaceRaider said:
What do you mean?
Click to expand...
Click to collapse
No... it is not but
Reepie123 cant flash (downgrade) when flash rom kdz 30B...
Yesterday... i aslo was it... for 8h search on 4rum...
I can downgrade it .... and now.. i want help reepie123. Hi.
reepje123 said:
I just want to get my G3 working again, doesn't matter if stock or CM rom
I tried 21A .kdz and 10E or .tot. When using 21A kdz it gives an error. It tells me something like connect my phone again and try again. Only the 30B was kinda flashable.
Ehm what?
Click to expand...
Click to collapse
I think you've hardbricked it
SpaceRaider said:
I think you've hardbricked it
Click to expand...
Click to collapse
No,... i think it is softbrick... but we dont know ways.
SpaceRaider said:
I think you've hardbricked it
Click to expand...
Click to collapse
You mean it's dead, completely? I thought having a download mode and seeing my G3 on my pc with a COM# port is better than seeing some QHBULK_9008 device or similar, where I need to open my G3, connect pins and some sh*t to recover it.
reepje123 said:
You mean it's dead, completely? I thought having a download mode and seeing my G3 on my pc with a COM# port is better than seeing some QHBULK_9008 device or similar, where I need to open my G3, connect pins and some sh*t to recover it.
Click to expand...
Click to collapse
It is not dead, you can always fix it but it is a very weird issue
SpaceRaider said:
It is not dead, you can always fix it but it is a very weird issue
Click to expand...
Click to collapse
Oh ok, that sounds better. So there is hope and we just need someone who knows what to do.
reepje123 said:
Oh ok, that sounds better. So there is hope and we just need someone who knows what to do.
Click to expand...
Click to collapse
Are You have Rom TOT 10x...???
mchiensd said:
Are You have Rom TOT 10x...???
Click to expand...
Click to collapse
Yes, I already tried the 10E tot. But the problem is that the flash tools gives an error: "Model Information Check FAIL!".
reepje123 said:
Yes, I already tried the 10E tot. But the problem is that the flash tools gives an error: "Model Information Check FAIL!".
Click to expand...
Click to collapse
Mabye that's because of your IMEI error
SpaceRaider said:
Mabye that's because of your IMEI error
Click to expand...
Click to collapse
I guess so, but how do I restore my EFS without having TWRP?
reepje123 said:
Yes, I already tried the 10E tot. But the problem is that the flash tools gives an error: "Model Information Check FAIL!".
Click to expand...
Click to collapse
OK.... Now, you flash TOT again with TOT file.... but dont change file DLL you have....
Download... file DLL fix...
https://drive.google.com/file/d/0B0VrTZddvLF7b3Q1b1BlQ2w0clE/view?usp=sharing
Also don't forget: Maybe its because of your OS or even Setup (Hardware/Driver related). Even if it works seemingly at first glance.
That's my experience with all flashing tools that on some machines and setups there will happen some funny stuff and corrupt systems even if its reported to be working initially.
So if you didn't try yet use another PC/Laptop preferably with Windows 7 to 8.0 (only if you disabled driver signatures)
Edit: Also try different USB-Cables.
mchiensd said:
OK.... Now, you flash TOT again with TOT file.... but dont change file DLL you have....
Download... file DLL fix...
https://drive.google.com/file/d/0B0VrTZddvLF7b3Q1b1BlQ2w0clE/view?usp=sharing
Click to expand...
Click to collapse
I couldn't find another dll. Where have you got that from? Is it safe to use?
justyourimage said:
Also don't forget: Maybe its because of your OS or even Setup (Hardware/Driver related). Even if it works seemingly at first glance.
That's my experience with all flashing tools that on some machines and setups there will happen some funny stuff and corrupt systems even if its reported to be working initially.
So if you didn't try yet use another PC/Laptop preferably with Windows 7 to 8.0 (only if you disabled driver signatures)
Edit: Also try different USB-Cables.
Click to expand...
Click to collapse
I already tried 2 PCs, one with 8.1 and another one with 7 (and 10). Both are giving almost the same result. Except the .kdz flash tool crashes on 8.1 at 99%.
I'm using the original USB cable.
reepje123 said:
I couldn't find another dll. Where have you got that from? Is it safe to use?
Click to expand...
Click to collapse
Used file DLL this to restore Lollipop for my LG D855... when i flash KDZ 30B
It safe!!!!
it from user autoprime in 4rum....

Secure booting error after Hidden menu test

Hello,
i dropped my phone last night and at first boot phone clock changed and i could not connect wifi. i tried to connect wifi today but it did not worked. Thats why i opened hidden menu by using *#546368#*855# test my phone if there is a hardware problem or not. i clicked first option then second option my phone got reset but i got Secure booting error after that and it stuck. Then i opened twrp by using factory data reset option. i got backup of my data from twrp menu.
What should i do now?
Notes:
- i use twrp + android 6.0 rooted firmware
- i dont know if can can install apk since i cant open android system
- i dont want to install stock rom by a pc because i think i will lose all info on phone and ont be able to get them back without twrp.
juba08 said:
Hello,
i dropped my phone last night and at first boot phone clock changed and i could not connect wifi. i tried to connect wifi today but it did not worked. Thats why i opened hidden menu by using *#546368#*855# test my phone if there is a hardware problem or not. i clicked first option then second option my phone got reset but i got Secure booting error after that and it stuck. Then i opened twrp by using factory data reset option. i got backup of my data from twrp menu.
What should i do now?
Notes:
- i use twrp + android 6.0 rooted firmware
- i dont know if can can install apk since i cant open android system
- i dont want to install stock rom by a pc because i think i will lose all info on phone and ont be able to get them back without twrp.
Click to expand...
Click to collapse
Hello,
You need to install Mr.Bump (click on it to download it) and move it to your Phone (Go to TWRP,connect your phone with your PC,move the file to your phone)Then click install and select "Mr.Bump.zip" file.
Greetings.
thanks you but i bricked my phone last night now it does not even open or charge. Thats i have done so far:
i used auto rec on my lg g3 d855 phone. https://forum.xda-developers.com/lg-g3/development/stock-d855-30b-images-kdz-flashables-t3282012 i had stock lg 6.0 30b firmware provided in this topic. it said succsfull and after the reset phone did not open and it does not respod to any button also dont get charge there is just black screen. is there there any way yo fix this?
do you think something like this topic help this issue?
https://forum.xda-developers.com/verizon-lg-g3/general/how-to-hardbrick-guide-using-test-t3276928
juba08 said:
thanks you but i bricked my phone last night now it does not even open or charge. Thats i have done so far:
i used auto rec on my lg g3 d855 phone. https://forum.xda-developers.com/lg-g3/development/stock-d855-30b-images-kdz-flashables-t3282012 i had stock lg 6.0 30b firmware provided in this topic. it said succsfull and after the reset phone did not open and it does not respod to any button also dont get charge there is just black screen. is there there any way yo fix this?
do you think something like this topic help this issue?
https://forum.xda-developers.com/verizon-lg-g3/general/how-to-hardbrick-guide-using-test-t3276928
Click to expand...
Click to collapse
It would be better not to flash those kdz files.
You could have asked here before proceeding,but it doesn't matter now.
For the topic that you sent,I'm not sure that it will work.
So,can enter in Download mode (Click on it to see how to enter)
If you can,please reply.
Sotiris02 said:
It would be better not to flash those kdz files.
You could have asked here before proceeding,but it doesn't matter now.
For the topic that you sent,I'm not sure that it will work.
So,can enter in Download mode (Click on it to see how to enter)
If you can,please reply.
Click to expand...
Click to collapse
i have done everything on that topic i went ok until last steps but at last i still got black screen and cant enter download mode or boot. but pc recognizes the phone as lge androidnet usb now in device manager. it was Qualcomm 9008 at start.
juba08 said:
i have done everything on that topic i went ok until last steps but at last i still got black screen and cant enter download mode or boot. but pc recognizes the phone as lge androidnet usb now in device manager. it was Qualcomm 9008 at start.
Click to expand...
Click to collapse
Hmm Try this guide Unbrick guide (it's officially for D855)
thanks it worked in second time now i can enter download mode i am flashing with lg flash tool. the problem is i could not install twrp before. i tried 5 roms + autorec, twrp manager and twrp offical app. and all resulted failing to open clock work mode. now i will try with D85530B_00_1217_32G.kdz
i have twrp backup in my sd card that why i am trying to boot into twrp for more than 24 hours. i hope i can do this. i winn never use eutorec i will use offical twrp app next time.
i can open android but i cant open twrp i got error boot vefication failed. i can use phone like that but i want to get my backup. if i cant i will have to install apps one by one and i will also lose some files, contacts, data etc.

I Cant install TWRP on my Galaxy Tab S 10.5 SM-T800

Hey guys so i want to install this " https://forum.xda-developers.com/galaxy-tab-s/development/rom-android-7-nougat-t3449078 " on my Galaxy Tab S 10.5 (SM-T800), to do this i saw a video that you need to install TWRP to install a rom, so i installed ADB on my computer, Downloaded the TWRP for my device, then followed the instruction, i typed ADB Devices and my device appeared, then i typed ADB Reboot Bootloader, my tablets restarts normally without going in the bootloader menu, i tried pressing the volume up+pwer+home i click restar bootloader, again nothing happens it just restarts the tablet. My tablet is not rooted, i have never done anything to it since a bought it.
My android is 6.0.1
here is a picture with all my tablet details " https://drive.google.com/open?id=0ByVQvyMYG-zZbmJmREpaejlNV1E "
misheckkay said:
Hey guys so i want to install this " https://forum.xda-developers.com/galaxy-tab-s/development/rom-android-7-nougat-t3449078 " on my Galaxy Tab S 10.5 (SM-T800), to do this i saw a video that you need to install TWRP to install a rom, so i installed ADB on my computer, Downloaded the TWRP for my device, then followed the instruction, i typed ADB Devices and my device appeared, then i typed ADB Reboot Bootloader, my tablets restarts normally without going in the bootloader menu, i tried pressing the volume up+pwer+home i click restar bootloader, again nothing happens it just restarts the tablet. My tablet is not rooted, i have never done anything to it since a bought it.
Click to expand...
Click to collapse
I think you need to root it first. Do a search for "CF auto-root" and find the correct one for your model number. You'll need to use Odin rather than ADB to flash the CF Auto-Root file. Once it is rooted, you can flash TWRP with Odin also. There are plenty of tutorials on the web and here at XDA on how to do this. Once TWRP is installed, you can use it to flash the ROM you want (I would suggest LineageOS 14.1).
Link below is a tutorial on rooting.
http://www.theandroidsoul.com/root-samsung-galaxy-tab-s-10-5-sm-t800-cf-autoroot-beanstown106/
lmacmil said:
I think you need to root it first. Do a search for "CF auto-root" and find the correct one for your model number. You'll need to use Odin rather than ADB to flash the CF Auto-Root file. Once it is rooted, you can flash TWRP with Odin also. There are plenty of tutorials on the web and here at XDA on how to do this. Once TWRP is installed, you can use it to flash the ROM you want (I would suggest LineageOS 14.1).
Link below is a tutorial on rooting.
Click to expand...
Click to collapse
Hello thanks for answering, i did what the tutorial said, but Odin wont detect my device, the drivers are installed just checked Device manager, i tried installing Kies nothing shows up on Odin. Any suggestion.
misheckkay said:
Hello thanks for answering, i did what the tutorial said, but Odin wont detect my device, the drivers are installed just checked Device manager, i tried installing Kies nothing shows up on Odin. Any suggestion.
Click to expand...
Click to collapse
Did you enable USB debugging in the developer options settings on the Tab S? If you did not, that's your problem. If you did, check that the PC detects your device before you start Odin. If it does, unplug the device, start Odin, and plug it back in. If it still doesn't detect it, try re-installing the drivers.
lmacmil said:
Did you enable USB debugging in the developer options settings on the Tab S? If you did not, that's your problem. If you did, check that the PC detects your device before you start Odin. If it does, unplug the device, start Odin, and plug it back in. If it still doesn't detect it, try re-installing the drivers.
Click to expand...
Click to collapse
I re-installed the drivers several times and it worked :good: . thanks for the help

Categories

Resources