First of all thank Surdu for making both CM13 and this CM14 rom.
I'm having a bit of problem with installation.
Model number is HUAWEI RIO-TL00
I am running the CM13 made by surdu_petru, 13.0-20160502-UNOFFICIAL-rio. I was able to get that installed relatively easily and it runs just smooth and fine.
I have updated the TWRP to the version listed by Surdu in the Lineage OS thread and performed factory reset before attempting to install,
but I got an error 7
the version I'm attempting to install is "lineage-14.1-20170115-UNOFFICIAL-rio"
the error messages are
comparing TZ version TZ.BF.3.0.C3-00025 to TZ.BF.3..0.C3-00022
assert failed: rio.verify_trustzone("TZ.BF.3.0.C3-00025") = "1"
Installing zip file '/external_sd/lineage-14.1-20170115-UNOFFICIAL-rio.zip'
checking for MD5 file...
skipping MD5 check: no MD5 file found
Updater process ended with ERROR:7
Error installing zip file '/external_sd/lineage-14.1-20170115-UNOFFICIAL-rio.zip'
I noticed that something on my phone definitely doesn't match with the updater script.
Removing the assert lines in the updater script will allow TWRP to install, but I cannot get past the Cyanogenmod robot face, it keeps flickering after a second.
Any suggestion on what to do is appreciated, thanks.
1. try to flash the lastest version of TWRP. surdu_petru had mentioned that in the post.
2. I experienced the same issue of looping Cyanogenmod face flickering, after force reboot. all fixed.
Related
Hi, Devs!
i'm having problem with flashable zips. :crying:Every time i flash a zip in TWRP
which is not specially made for Zenfone 2 x86 devices it shows me an error
"updater process ended with error 255":crying:
I also changed the 'update-binary' file from METAF folder from the Zenfone to firmware. But again it shows me another error of "updatre process ended
with error 6".:crying:
Someone can please tell me how could i make zips X86 device compitable?
There is a TWRP available for the Zenfone 2. May not be the latest but it works, its in either Android Developement or Original Android Developement.
i have TWRP
But i have TWRP version 3.0.0.0?
But let me know that the above problem is becouse of TWPR or the ZIP file?
Hello there,
I have Fulmics Rom 5.O in a LG G3 D855. I am trying to install the Fulmics 6.5, but when installing at recovery mode, I get this error message (any help how to solve the issue isomer than welcome)
- Updating partition details..done
- Full SELinux support is present.
- MTP enabled.
-Installing '/sdcard/FulmicsROM-6.5.zip'
-Checking for MD5 file...
Skipping MD5 check: no MD5 file found
E: FAILED TO sysMapFile 'sdcard/FulmicsROM-6.5.zip'
Error flashing zip 'sdcard/FulmicsROM-6.5.zip'
Updating partition details...done
Thank you very much in advance for your help,
what twrp version did you use?
Hi,
I have a honor 8 pro device duk L09C675B140. I've unlocked the bootloader and installed twrp. However the root didn't happen completely but my device works fine. I recently tried flashing a zip file to update it to B150. The zip file was valid. But I keep getting the assert failed error. I tried everything I could. Please let me know what is going wrong. Here is the log file:
Edit: I can't add the log file because of xda's policy.
Rocky1516 said:
Hi,
I have a honor 8 pro device duk L09C675B140. I've unlocked the bootloader and installed twrp. However the root didn't happen completely but my device works fine. I recently tried flashing a zip file to update it to B150. The zip file was valid. But I keep getting the assert failed error. I tried everything I could. Please let me know what is going wrong. Here is the log file:
Edit: I can't add the log file because of xda's policy.
Click to expand...
Click to collapse
I can't flash update.zip from twrp .
update.zip is meant to be flashed through the stock recovery. Or you can use the fullOTA flasher to flash those updates through TWRP (you will need 3 update files)
Hi,
I am "building" (first had to fix the LCD etc.) a de-googled DAISY. I managed to unlock the bootloader, install TWRP, and root the original OS (Android One 10).
The problems started when I tried to install a custom ROM (at first Havoc, but other gave the same results). Just as instructed (YT, other pages, here...) I:
- formatted via TWRP
- REBOOT to TWRP
- wipe all except SD
- install ROM from zip
...and at this point I came across an error message
Error applying update: 7 (Error code: : kInstallDeviceOpenError)
Updater process ended with ERROR: 1
Many solutions suggest flashing boot.img from the ROM package, but (WHY?!?) all ROM's ((Havos, crDroid etc.) for daisy have no such file, although other devices have boot.img in their package.
I'm pretty much clueless... :/
Help, and thanks in advance...
mothzart said:
Hi,
I am "building" (first had to fix the LCD etc.) a de-googled DAISY. I managed to unlock the bootloader, install TWRP, and root the original OS (Android One 10).
The problems started when I tried to install a custom ROM (at first Havoc, but other gave the same results). Just as instructed (YT, other pages, here...) I:
- formatted via TWRP
- REBOOT to TWRP
- wipe all except SD
- install ROM from zip
...and at this point I came across an error message
Error applying update: 7 (Error code: : kInstallDeviceOpenError)
Updater process ended with ERROR: 1
Many solutions suggest flashing boot.img from the ROM package, but (WHY?!?) all ROM's ((Havos, crDroid etc.) for daisy have no such file, although other devices have boot.img in their package.
I'm pretty much clueless... :/
Help, and thanks in advance...
Click to expand...
Click to collapse
Error 1 usually means wrong install package or wrong TWRP.
Are you using TWRP by offain?
[SOLVED]
The whole problem was that TWRP was wrong (not even offain as far as I remember). But I got a HUUUUGE amount of help (MANY THANX!!!!) from opal06 (main maintainer for crDroid on daisy) on Telegram channel dedicated to crDroid on daisy.
So If anyone hase similar problems - go to Telegram group - they will help you!
After flashing right (modified) TWRP versions, evrthng went fine, although I got to admit it was pretty complicated for [unlock + TWRP + custom rom + root] combo. On lavender it was much easier
cya all, good luck!
EDIT: Solved.
I followed this tutorial: https://forum.xda-developers.com/t/...d-q-10-0-ota-for-oneplus-5t-dumpling.3709265/
I removed the compatibility.zip on my pc using 7zip and then loaded the file on the phone while it was on recovery mode (twrp). The installation went fine.
---
I was following this tutorial: https://forums.oneplus.com/threads/...bootloader-easiest-step-by-step-guide.733862/
But, when i go to flash the downloaded OTA Rom, TWRP throws a lot of red errors:
Zip Treble compatibility error!
Invalid zip file format!
Error installing zip file <pathname>
Now I got a phone with no ROM, only TWRP on it... and not sure how to progress from here.
I tried with two OOS versions:
OnePlus5TOxygen_43_OTA_048_all_1904191530_f1dedf62ffb14bff.zip
OnePlus5TOxygen_43_OTA_069_all_2010292144_76910d123e3940e5.zip <-- this seems to be the last one on OnePlus website.
Any suggestions to fix this?