Develop Bugs

dead :)

Hello,
sorry, out of stupidity I installed another kernel (I thought that will be needed for another rom) but after boot via fastboot, the phone will not turn on, but only one vibrates.
* So I tried to flash new stock firmware. but --->
16/054/2013 1:54:15 - ERROR - Error in processHeader 2: The system can not find the file specified.
16/054/2013 1:54:15 - ERROR - Error flashing. Aborted
Can you please help me? thanks

everything is ok now, sry

Problem with installing Lineage 14.1 made by surdu_petru

First of all thank Surdu for making both CM13 and this CM14 rom.
I'm having a bit of problem with installation.
Model number is HUAWEI RIO-TL00
I am running the CM13 made by surdu_petru, 13.0-20160502-UNOFFICIAL-rio. I was able to get that installed relatively easily and it runs just smooth and fine.
I have updated the TWRP to the version listed by Surdu in the Lineage OS thread and performed factory reset before attempting to install,
but I got an error 7
the version I'm attempting to install is "lineage-14.1-20170115-UNOFFICIAL-rio"
the error messages are
comparing TZ version TZ.BF.3.0.C3-00025 to TZ.BF.3..0.C3-00022
assert failed: rio.verify_trustzone("TZ.BF.3.0.C3-00025") = "1"
Installing zip file '/external_sd/lineage-14.1-20170115-UNOFFICIAL-rio.zip'
checking for MD5 file...
skipping MD5 check: no MD5 file found
Updater process ended with ERROR:7
Error installing zip file '/external_sd/lineage-14.1-20170115-UNOFFICIAL-rio.zip'
I noticed that something on my phone definitely doesn't match with the updater script.
Removing the assert lines in the updater script will allow TWRP to install, but I cannot get past the Cyanogenmod robot face, it keeps flickering after a second.
Any suggestion on what to do is appreciated, thanks.

1. try to flash the lastest version of TWRP. surdu_petru had mentioned that in the post.
2. I experienced the same issue of looping Cyanogenmod face flickering, after force reboot. all fixed.

Error When Flashing Magisk Manager 10.2 on OP3

Hi there, I'm having difficulties flashing Magisk 10.2 on my OP3 from TWRP. This is the error that displays:
MTP Enabled
Installing zip file '/sdcard/Download/root things/Magisk-v10.2.zip
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
******************************************
Magisk v10.2 Boot Image Patcher
******************************************
- Mounting /system(ro), /cache, /data
- Device platform: arm64
- Constructing environment
- /data/magisk.img detected!
- Mounting /data/magisk.img to /magisk
- Found boot image: /dev/block/sde18
- Unpacking boot image
- SuperSU patched boot detected!
- Adding auto patch script for SuperSU
! SU image mount failed. . .
! Please immediately flash SuperSU now
! Installation will complete after flashing SuperSU
Updater process ended with ERROR: 1
Error installing zip file '/sdcard/Download/root thing/Magisk-v10.2.zip'
Updating partition details. . .
. . . done
Click to expand...
Click to collapse
Any help would be much appreciated!
For the record, I just fully unrooted SuperSU and am trying to now flash Magisk 10.2.

SilverCorrosion said:
Hi there, I'm having difficulties flashing Magisk 10.2 on my OP3 from TWRP. This is the error that displays:
Any help would be much appreciated!
For the record, I just fully unrooted SuperSU and am trying to now flash Magisk 10.2.
Click to expand...
Click to collapse
Don't what ROM you are using, but try this script https://forum.xda-developers.com/showpost.php?p=63615067
then dirty-flash your ROM(possibly gapps if it is a custom ROM) (if it is a ROM with in-built root reflash the script) let it boot, reboot to recovery and try to flash newest Magisk 11.1

SilverCorrosion said:
Hi there, I'm having difficulties flashing Magisk 10.2 on my OP3 from TWRP. This is the error that displays:
Any help would be much appreciated!
For the record, I just fully unrooted SuperSU and am trying to now flash Magisk 10.2.
Click to expand...
Click to collapse
This is because you have to restore boot.img file after uninstall SuperSu. So...
1. Extract boot.img from the rom zip you are using and copy this file into internal memory
2. Uninstall SuperSu from settings and say NO when SuperSu ask you about restore Boot (if you say YES, you will have bootloop for sure).
3. Reboot recovery and install the file boot.img you extracted in boot partition (select boot partition)
3. Install Magisk (last version is V11.1 ) Now it will work properly. It will install Superuser Magisk too.
4. Reboot system and install Magisk Manager from Play Store
5. From Magisk settings, select "Magisk Hide"
6. Reboot system and check if you can pass SafetyNet from Magisk. It should work now.

Unable to flash update.zip, assert failed error

Hi,
I have a honor 8 pro device duk L09C675B140. I've unlocked the bootloader and installed twrp. However the root didn't happen completely but my device works fine. I recently tried flashing a zip file to update it to B150. The zip file was valid. But I keep getting the assert failed error. I tried everything I could. Please let me know what is going wrong. Here is the log file:
Edit: I can't add the log file because of xda's policy.

Rocky1516 said:
Hi,
I have a honor 8 pro device duk L09C675B140. I've unlocked the bootloader and installed twrp. However the root didn't happen completely but my device works fine. I recently tried flashing a zip file to update it to B150. The zip file was valid. But I keep getting the assert failed error. I tried everything I could. Please let me know what is going wrong. Here is the log file:
Edit: I can't add the log file because of xda's policy.
Click to expand...
Click to collapse
I can't flash update.zip from twrp .

update.zip is meant to be flashed through the stock recovery. Or you can use the fullOTA flasher to flash those updates through TWRP (you will need 3 update files)

EDIT: Solved. Fail to flash Stock ROM on OP5T

EDIT: Solved.
I followed this tutorial: https://forum.xda-developers.com/t/...d-q-10-0-ota-for-oneplus-5t-dumpling.3709265/
I removed the compatibility.zip on my pc using 7zip and then loaded the file on the phone while it was on recovery mode (twrp). The installation went fine.
---
I was following this tutorial: https://forums.oneplus.com/threads/...bootloader-easiest-step-by-step-guide.733862/
But, when i go to flash the downloaded OTA Rom, TWRP throws a lot of red errors:
Zip Treble compatibility error!
Invalid zip file format!
Error installing zip file <pathname>
Now I got a phone with no ROM, only TWRP on it... and not sure how to progress from here.
I tried with two OOS versions:
OnePlus5TOxygen_43_OTA_048_all_1904191530_f1dedf62ffb14bff.zip
OnePlus5TOxygen_43_OTA_069_all_2010292144_76910d123e3940e5.zip <-- this seems to be the last one on OnePlus website.
Any suggestions to fix this?