Flash like mtk device cuz it support USB device serial com3 bricked cuz flashed uboot of redmi note 2 so I need ROM make like mtk device installing vcom da driver after we must have (scatter file loader)
Please help me if u could
Related
while I was flash my gx8 it become soft brick no fastboot no recovery no boot it read as Qualcomm HS USB QDLoader 9008 need rom with xml scatter need help
hi
im sooo f stupid i did samthing to my phone by mistake
i downloaded flashboot + adb and exec this cmd in my phone
fastboot erase aboot
fastboot erase boot
fastboot erase laf
fastboot erase rpm
fastboot erase recovery
fastboot erase modem
fastboot erase misc
fastboot erase sbl1
fastboot erase tz
fastboot erase dbi
fastboot reboot
and the phone now wont even turn on is this any help plz
sry for my english
Use boot diag and reflash all those file what u delete in fastboot mode
Boot diag helps to flash all those files
For that u have
Lg g3 os file in .tot format
And boot diag tool
After dwnld those files
Remove battery and connect to the pc by usb
Select .tot file
And target
And then extrct
After cmplting this select ur device comport and then reflash all those file
Note : when u connect ur device without battery to pc the above process works only when the device shown as qualcomm device 0009 similar like this
hanumathkali said:
Use boot diag and reflash all those file what u delete in fastboot mode
Boot diag helps to flash all those files
For that u have
Lg g3 os file in .tot format
And boot diag tool
After dwnld those files
Remove battery and connect to the pc by usb
Select .tot file
And target
And then extrct
After cmplting this select ur device comport and then reflash all those file
Note : when u connect ur device without battery to pc the above process works only when the device shown as qualcomm device 0009 similar like this
Click to expand...
Click to collapse
didnt work still no light
Try bro
It's working
I have faced same problem 1 week back
Check in the device manager which type of model ur devices detect in ur
Like qualcomm or LG android mobile
Board diag works only when device detects as Qualcomm
Remove battery and connect to pc
Check which type as ur device detects
In case doesn't detects as qualcomm
There is another way to converting lg android mobile to qualcomm device
Once check this other wise i will help to try another way
---------- Post added at 04:22 PM ---------- Previous post was at 04:00 PM ----------
sangamer said:
didnt work still no light
Click to expand...
Click to collapse
Try bro
It's working
I have faced same problem 1 week back
Check in the device manager which type of model ur devices detect in ur
Like qualcomm or LG android mobile
Board diag works only when device detects as Qualcomm
Remove battery and connect to pc
Check which type as ur device detects
In case doesn't detects as qualcomm
There is another way to converting lg android mobile to qualcomm device
Once check this other wise i will help to try another way
You basically have bricked your phone.
Follow the instructions in this thread:
https://forum.xda-developers.com/tmobile-lg-g3/help/lg-g3-d851-unbrick-qualcomm-9008-t3430221
I unlocked eh bootloader , installed twrp then after flashing magisk ,I got a bootloop.
Afterwards i tried to flash the stock rom ,but I got the mismatching device and rom error, so decided to install a custom rom .
After I installed pixel experience P and THE SYSTEM IS DESTROYED.
So I went back to the stock rom and edited the Flash_all.bat file removing everything but the flash commands.
now I have bricked phone and I can't enter EDL mode . when I plugg it in Usb I get HS-USB Diagnostics 900E.
Any suggestion is welcome
Can you enter fastboot unlock the bootloader and then reboot to edl via fastboot?
TJ1999 said:
Can you enter fastboot unlock the bootloader and then reboot to edl via fastboot?
Click to expand...
Click to collapse
thanks for your reply.
I succeded in entering the edl mode by opening the phone and shorting the JTAG pins.
After that I used mi flash tool with the srock rom and it worked
O did same mistake as you.
Can you teach me How to revive Mine?
anykill said:
O did same mistake as you.
Can you teach me How to revive Mine?
Click to expand...
Click to collapse
Just go to fastboot mode and type: "fastboot oem edl"
If you can´t enter fastboot, you have to open your phone and connect the testpoints, then connect cable to pc and releas the test-points
https://www.youtube.com/watch?v=mhsRv42rsqI - here for the redmi 6 pro (same hw as mi a2 lite) - in min 2, the test points are shown!
bil23 said:
I unlocked eh bootloader , installed twrp then after flashing magisk ,I got a bootloop.
Afterwards i tried to flash the stock rom ,but I got the mismatching device and rom error, so decided to install a custom rom .
After I installed pixel experience P and THE SYSTEM IS DESTROYED.
So I went back to the stock rom and edited the Flash_all.bat file removing everything but the flash commands.
now I have bricked phone and I can't enter EDL mode . when I plugg it in Usb I get HS-USB Diagnostics 900E.
Any suggestion is welcome
Click to expand...
Click to collapse
Hey look at this: https://www.youtube.com/watch?v=YctyUhBgp34
it is very simple. I know you solve the problem but this video is better.
anykill said:
O did same mistake as you.
Can you teach me How to revive Mine?
Click to expand...
Click to collapse
1- install mi flash tool and Qualcomm driver on your Pc
2- open the phone (just remove the battery connector )
3-plug a USB cable in the device
4- short the jtag pins(you can find their location in this page www mobilerdx com/2018/09/xiaomi-redmi-6-pro-test-point-boot-into-edl-9008-mode.html
7-plug the USB cable in the Pc while shortening the pins
If you do these steps mi flash tool should reconize your device and you will be able to flash it
Hi! I am the owner of a Xiaomi Mi Max 3.
I tried to update it to a stable official ROM using Miflash, instead of checking the box flash_all I marked flash and lock. I blocked the bootloader.
The phone does not start, it only goes into the recovery mode and a message appears in red at the end of the recovery menu "this miui version can not be installed on this device"
(This version of MIUI can not be installed on this device)
I can not change the ROM using Miflash.
Can somebody help me?
Thanks greetings.
valdsf said:
Hi! I am the owner of a Xiaomi Mi Max 3.
I tried to update it to a stable official ROM using Miflash, instead of checking the box flash_all I marked flash and lock. I blocked the bootloader.
The phone does not start, it only goes into the recovery mode and a message appears in red at the end of the recovery menu "this miui version can not be installed on this device"
(This version of MIUI can not be installed on this device)
I can not change the ROM using Miflash.
Can somebody help me?
Thanks greetings.
Click to expand...
Click to collapse
Hello
Yes there are other programs you can try and use: QUALCOMM / QFIL
I had a similar problem with a Lenovo Tab4 8 Plus (8704x) device and this QFIL program and the right ROM files solved the problem for me on that Lenovo tablet when it was hard bricked i.e only went into fastboot or recovery mode.
You need to find all the right version flashing files for your device before commencing, i.e you cannot downgrade a MIUI rom it has to be the same as what was / is on your device or an upgraded version. Unless your bootloader is unlocked :good:
https://en.miui.com/thread-432217-1-1.html
https://androidmtk.com/download-qualcomm-flash-image-loader-qfil
Also maybe you can try adb fastboot program if QFIL doesnt work
https://forum.xda-developers.com/poco-f1/how-to/tool-xiaomi-adb-fastboot-tools-t3887359
One last thing I remember is make sure your Xiaomi device is recognised by the computer in all modes if possible; fastboot, recovery for the ADB drivers or QFIL drivers to work properly. A pop up ballon bottom right PC screen will show if drivers are recognised and ready.
All the best with it
Xiaomi Mi Max 3 Fixed! Entering EDL mode and following these steps.
https://forum.xda-developers.com/redmi-note-5-pro/how-to/fix-arb-bricked-device-qfil-t3841780
thanks @devcon69!!
Hey guys
My device is bricked .no fastboot no recovery and when I connect it to PC it's not showing on device manager.
Any suggestion?
It would be better to be more specific on how you bricked the device.
Does the device turn on and hang on a specific step or it is dead at all?
BTW, did you already tried to use Qualcomm Flash tools to get the device recognized from your PC?
You can also try with MiFlash or MiTool as well.
The phone has to be opened from the back and you can flash from the fast boot via Test Point and EDL MODE.
There is training on YouTube.
Flounderist said:
It would be better to be more specific on how you bricked the device.
Does the device turn on and hang on a specific step or it is dead at all?
BTW, did you already tried to use Qualcomm Flash tools to get the device recognized from your PC?
You can also try with MiFlash or MiTool as well.
Click to expand...
Click to collapse
After installing pixel experience I just want to restore my miui rom backup ant it failed and phone is fully bricked with no twrp fastboot etc
Will try it
farzad3620 said:
The phone has to be opened from the back and you can flash from the fast boot via Test Point and EDL MODE.
There is training on YouTube.
Click to expand...
Click to collapse
Will try that thankq
Moh3n.B said:
After installing pixel experience I just want to restore my miui rom backup ant it failed and phone is fully bricked with no twrp fastboot etc
Will try it
Click to expand...
Click to collapse
Would you mind to a little more specific?
At which point the device broke? It is stuck at boot logo? If you flashed a miui twrp backup probably vendor or firmware are mismatching.
Moh3n.B said:
After installing pixel experience I just want to restore my miui rom backup ant it failed and phone is fully bricked with no twrp fastboot etc
Will try it
Click to expand...
Click to collapse
Did you try to restore Data partition only, or did you try a full wipe and restoring the whole miui rom?
I think it's important for the community to know what moves can brick the device
I have the same problem. My cell phone is the mi9 SE. Has anyone managed to solve?
My device (mi 9 se) bricked .no fastboot no recovery and when I connect it to PC it's show qualcomm hs-usb qdloader 9008(com20) on device manager.
i couldnt flash rom with mi flash tool. its show this error:
[06:28:14 PM COM20]:[06:28:14 PM COM20]:dump:<?xml version="1.0" encoding="UTF-8" ?>
<data><log value="ERROR: Only nop and sig tag can be recevied before authentication." /></data><?xml version="1.0" encoding="UTF-8" ?>
<data><response value="NAK" rawmode="false" /></data>).
please help me to revive my phone.
i was in the exact same situation.
Sadly you can not flash in EDL unless you have an authorized account from xiaomi. which is unlikely that you have one. (all newer xiaomi phones need that)
you have to search for an service/people that have one.
you have to setup the phone in edl mode, and they will use teamviewer to use xiaomiflash and login and flash then.
there is an thread in mi9t pro forum, which approves such a service, (but i dont recommend that one, i used another)
https://forum.xda-developers.com/k20-pro/how-to/edl-flash-how-to-fix-hard-brick-t3968400
can I unbrick mi 9 se with box dongle on edl mod without mi account authentic?
leilim said:
can I unbrick mi 9 se with box dongle on edl mod without mi account authentic?
Click to expand...
Click to collapse
Any news. I also brick my 9 SE
Hi all, on my MI9 SE , when i uninstall Magisk from app, reboot only in FASTBOOT mode , but all method to flash newer boot.img or recovery.img or entire firmware from mflashTool.... dont work....
I tryed also with ADB , but not flash nothing.
I see my device in fastboot mode (fastboot devices) but after that i have always error
"FAILED (command write failed (Unknown error))"
and phone disconnect from fastboot....
Are There a method to force flash firmware? (ADB and MIFlashTool not able to prevent shutdown every command run)
thanks