Hey everyone,
I recently installed a new ROM, but now my phone and TWRP is asking me for a password. I never set one, I did recently setup a pattern but I'm not able to input a pattern in TWRP or after Google logo goes away and I'm asked for a password.
I did create a nandriod but cannot get to it. If I ADB to the TWRP location I get access denied. If I use TWRP to to restore the backup I get access denied.
Any idea how to pull the nanriod backup from my phone or bypass this encryption on TWRP? ANy help would be great.
I already installed factory system, boot, recovery but that made things worse. I don;t even get past the GOOGLE logo anymore. I know I need to format userdata at this point but I really need to pull that nandriod off of it.
Related
While installing the most recent update to my encrypted SG3-L710, the phone restarted and while booting up remained stuck on the blue/white Samsung logo.
-After removing the battery and attempting to get around this several times it appeared that the update had soft-bricked my phone. I was never prompted to put in my passcode to undo the encryption.
-I am able to access CWM Recovery and, being that the only significant thing I would lose are my contacts so I attempted to perform a factory restore which was unsuccessful. It appeared the error indicated it was the /sd_card and /data folders posing the problem.
-I attempted to mount and unmount the /sd_card and /data folders which was unsuccessful, formating them also did not work.
-I downloaded Odin and the PIT file as my last hope. I attempted to flash the stock ROM to the phone and hopefully wipe the old ROM from the system. Odin also encountered problems with the /sd_card and /data and was not able to progress past that point. Now I am attempting it a second time to obtain the specifics and it's stuck on "<ID:0/004> Send lock information...".
Any ideas on how to be able to bypass the encryption and wipe my phone so I can flash a new ROM on this?
I've been working on this problem for almost two days now and I would greatly prefer not having to send my phone into Samsung and spend $100 to do this for me! Thanks ahead of time, bear in mind I'm new to this and might be a bit slow.
Dear XDA, I could really use your help.
I have a stock LG Nexus 5x (bullhead/7.1.1) which recently started to fail to boot properly as it never loads past the coloured animations on startup and often stops. This sounds like it may be the boot-loop problem.
I have not rooted the phone, unlocked the boot-loader or flashed any recoveries. I have not enabled USB debugging and can't now because it won't boot.
I am looking at my options to recover the data from this phone.
I can get to the fastboot screen (where the fastboot command line tools see the device, but adb does not). I can proceed to the recovery screen and have tried clearing the cache with no luck.
I am considering trying:
Booting a fastboot recovery image
(eg fastboot boot recovery TWRP.img)
Applying a rescue OTA image
Will these methods void the phones warranty?
Will these methods even work (given the bootloader is locked)?
Can the images be recovery images like TWRP or does it have to be some stock/non-custom image?
Does the rescue OTA require adb/usb-debugging to be operational?
Will the data on the phone still be intact using these methods?
As I am cautiously working may way through this to firstly recover my data, secondly recover my phone., any advice would be greatly appreciated.
Sorry to hear that! I'm assuming your files weren't backed up to Google drive.
I don't know a way to recover your data! If you flash a OTA image, it might help fix your phone boot up problem and it will preserve your phone data.
This sucks because the phone is encrypted by default (did you use to enter a password in the middle of phone booting up and the it would continue booting after your password was accepted? If yes, encryption is on). So flashing TWRP won't mean you can see your data.
And it also has USB debugging disabled by default, which means you probably can't mount the internal memory through ADB.
So I would flash a full OTA image before anything else and keep my fingers crossed. Don't flash a full factory image because it will wipe the data and continue!!!
https://developers.google.com/android/ota
Sent from my Nexus 5X using XDA-Developers Legacy app
Commodore 64 said:
Sorry to hear that! I'm assuming your files weren't backed up to Google drive.
I don't know a way to recover your data! If you flash a OTA image, it might help fix your phone boot up problem and it will preserve your phone data.
This sucks because the phone is encrypted by default (did you use to enter a password in the middle of phone booting up and the it would continue booting after your password was accepted? If yes, encryption is on). So flashing TWRP won't mean you can see your data.
And it also has USB debugging disabled by default, which means you probably can't mount the internal memory through ADB.
So I would flash a full OTA image before anything else and keep my fingers crossed. Don't flash a full factory image because it will wipe the data and continue!!!
Click to expand...
Click to collapse
Unfortunately I had not set-up any syncing/backup process on the phone. In the future I will.
Although I don't recall what encryption settings were originally configured, I didn't have to enter a password in the middle of boot, and was only prompted to swipe in. So I think it wasn't encrypted.
So I attempted to sideload an OTA image via:
adb sideload bullhead-ota-n4f26i-06953aec.zip
then rebooted, however the phone still does not successfully boot any further. I must have really broken this one!
Are there any data recovery methods if a factory reset is applied? if I take it in to a repair agent under-warranty, do they typically wipe your data anyway?
Also, do I need to remove this OTA image if I am to return it for repair under warranty?
In a futile/desperate attempt to try to further recover my data, I have attempted to load my Nexus 5X into the stock recovery mode, then experimented with adb when using the 'apply update from adb' option. This exposed a subset of adb commands which appeared to work (eg adb devices, adb sideload etc). I was hoping to be able to run adb shell or adb pull remote local and recover some data... however I only encountered errors.
./adb shell
error: closed
./adb pull /storage/emulated/ /backup
adb: error: connect failed: closed
I assume this is expected (due to the stock recovery adb limitations, but thought it was worth a shot). I am considering exploring the fastboot options (eg fastboot boot recovery recovery.img) I suspect these are also likely to fail/wipe data. Has anyone got any suggestions/ideas or am I just wasting my time?
This just happened to me yesterday, and I got the single file I needed off the phone today. I fought with the thing for hours yesterday. First you have to clear the cache and sideload a new bullhead zip file (as documented elsewhere). That isn't all, though. After several tries, I noticed that I got farther along in the boot if I let the phone sit for a while. So, on the theory that there's a loose solder connection somewhere and/or heat buildup, I put the phone in the freezer for a few hours (not my idea; found it on reddit). This worked, but only if I also tapped the back of the phone with my knuckle before booting. As I said, success today and I'm all smiles. I hope this helps someone else.
The phone, by the way, is bricked as far as I can tell. And my backups are going to be a lot more comprehensive from here on.
Hello
After rooting my G3, I installed an AOSP-based custom rom via TWRP. Then later on, encrypted the phone (& sdcard).
Recently, decided to install a LG stock-based rom (Clean Rom 2.8), but can't get passed a white screen asking for a password at first boot. This appears to be something to do with encryption? (From what I recall, there's no password to set when encrypting the phone). I factory-wiped, and wiped via advanced options of TWRP before installing this rom, so thought the phone has been decrypted.
After reading around, I tried flashing the latest LineageOS rom, and it worked fine. Notably, the phone indicates it's still encrypted! though the sdcard isn't as I can access it outside of the phone. I read about this problem with some ROMs not being able to boot past a password/white screen, but CM/LineageOS not having this issue.
Anyhow, how do I fully decrypt the LG phone? I've read various advice, but confused (especially about bootloaders).
Any help appreciated.
I dont own the device right now (in the future i wil) but i think i can help u whit that.... (it happened me with other phones)
The thing is if you have encription in the phone the only way to dencrypt the device is format the data partition through twrp THIS WILL ERASE ALL OF YOUR FILES LIKE PHOTOS AND MUSIC PLEASE DO A BACKUP BEFORE TRYING THIS
Boot to twrp, press the wipe button, in the wipe screen you will see a button that say "Format data" (in the top corner above the switch saying "swipe to factory reset") then twrp ask you to type yes, you do it and this will format the data partition erasing the files and the encription....
For the sd is the same but you can do it from a computer if you want or other way
I hope that this can help u
Greetings.
I had issues updating my Honor. Every time I would try the update, after downloading it, it would boot into TWRP with the message failed to unmount /system: device or resource busy.. Then, if I rebooted, the update simply didn't work (I was stuck in an older version of EMUI 8.0, I don't quite recall the precise number). Actually, the same error message would come every time I simply booted into TWRP.
At this point, after a backup, I thought I could just wipe the /system partition and then flash a zip, containing a new ROM, from the TWRP; I wiped the partition and rebooted, and of course the phone started into TWRP, because there wasn't a system anymore. The problem is: TWRP is stuck at splashscreen, and I can't access it anymore.
I tried going into fastboot, but only to find myself with the message Phone Unlocked, FRP Locked, and I was unable to boot another version of the TWRP.
Another thing I did was to boot into the e-Recovery, and from there if I tried restore to factory settings, it would boot again into the stuck TWRP; and if I tried to download latest version and restore, the download would fail because I couldn't retrieve package info.
I then tried a solution I've seen in this forum, namely , with a Windows 10 machine that I used as an hotspot (actually I wasn't able to use the same IP from primary and secondary DNS, only for primary).
I understand that the only thing left to do is to pay some amount of money to some company that would give me the FRP unlock key based on my IMEI, and I actually tried that, with HCU-Client, but after buying 12 credits, they reimbursed them for no appareantly no reasons. Did somebody use this method, perhaps with another company? And did it work?
tl; dr: honor 7x bricked: stuck into fastboot with FRP lock, can't open twrp, don't have system, need help to know if I can actually pay a company to give me the key for the FRP unlock.
Sadly my phone is corrupt and cant start anymore ... I want to use Newsflasher to rescue my Phone.
Before I want to use TWRP to make a backup. But I cannot enter TWRP.
As far as I understood TWRP cannot be installed on XZ2 compact, but it can be temporarily flashed (as I of course did to get my LineageOS Android 11).
But now when I flash it TWRP asks for a Password.
I just have my regular Screen Unlock Password - but if I type it in it tells me PASSWORD FAILED.
How can that be? Which other Password could it be? I dont know any ...
Obviously I would just remove the screen lock in Android. But it's corrupt x(
I want to do this before I have to do the wipe with Newflasher
If I ignore data encryption then it tells me when booting system that I have no OS installed ...
So then I will never be able to get my data back because encryption with password is still active and I cannot boot to turn it off?
And TWRP is bugged so it does not accept my real password? (How can that be omg ...)
Nothing can done now u have to flash flash a fastboot rom on your device without backup
That is
the_arxyn said:
Nothing can done now u have to flash flash a fastboot rom on your device without backup
Click to expand...
Click to collapse
That is what I was already thinking but yes let it be :/
I will use the old file that I used 2 years ago and also worked when I had to do the same.
For a strange reason it does not work when executing in the original created folder (by Xperifirm), but only if I push it on a external Hard Drive?
Otherwise it will tell FINISHED but it just took 3 seconds, which it will also do if it is played in any other folder ...
Anyways it asked me for a weird reason if I want to keep my userdata. I was thinking that there is no way to install a new OS but still keep the old data. I did it but then at the end of the Flashing it told the Sync did not work. I still booted up and it tells that it cant load the Android. So I dont know if this happened because I either left the user data intact or because that sync at the end did not work.
I'm just now scared to erase it when trying again, just in case that indeed I could safe my data.
So what is the story behind that *Erase User data Y / N*. Can I indeed keep my files this way?