Develop Bugs

[Q] Nexus 7 (2013) 4.4 KRT16S Touch Screen Dead

Hello
Today Morning I got an Adroid 4.4 OTA 253.1 MB update for my Nexus 7(2013) WIFI version. My current Build was JWR66N.
The updation was succesful and Tablet was running Properly without any issues..... Then Suddenly after 4-5 Hours all the problems started
1)Screen Partially Unresponsive
2)Not Recognizing the swipe and touch
3)Icons not getting Selected
..AND NOW
4)The Screen is completely UNRESPONSIVE !!!
The tab is working fine... i mean its showing notifications etc... But The screen is unresposive and i cannot even use the Lock Sreen
Please Help !!!!!!!

red_ferrari007 said:
Hello
Today Morning I got an Adroid 4.4 OTA 253.1 MB update for my Nexus 7(2013) WIFI version. My current Build was JWR66N.
The updation was succesful and Tablet was running Properly without any issues..... Then Suddenly after 4-5 Hours all the problems started
1)Screen Partially Unresponsive
2)Not Recognizing the swipe and touch
3)Icons not getting Selected
..AND NOW
4)The Screen is completely UNRESPONSIVE !!!
The tab is working fine... i mean its showing notifications etc... But The screen is unresposive and i cannot even use the Lock Sreen
Please Help !!!!!!!
Click to expand...
Click to collapse
Was your tablet rooted to begin with? If so were you running stock or a custom rom?
If it wasn't, you might wanna try unlocking the bootloader and flashing the stock image from Google using adb and fastboot. The relocking your boot loader.
Let me know if you Dont know how to do that. Hope that helps.
Sent from my Nexus 5 using Tapatalk

Help
frarredo said:
Was your tablet rooted to begin with? If so were you running stock or a custom rom?
If it wasn't, you might wanna try unlocking the bootloader and flashing the stock image from Google using adb and fastboot. The relocking your boot loader.
Let me know if you Dont know how to do that. Hope that helps.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
It was a Stock ROM 4.3 JWR66N... I had not done any modification or rooting whatsoever
I dont even now how to flash or unlock bootloader....
It was untouched in terms of modifications since the day I bought...
I got an normal OTA update as i mentioned... First 3-4 hrs awesome ... Then all went south... touch screen partially unresponsive and now completely Un responsive.. The tablet is working Fine

red_ferrari007 said:
It was a Stock ROM 4.3 JWR66N... I had not done any modification or rooting whatsoever
I dont even now how to flash or unlock bootloader....
It was untouched in terms of modifications since the day I bought...
I got an normal OTA update as i mentioned... First 3-4 hrs awesome ... Then all went south... touch screen partially unresponsive and now completely Un responsive.. The tablet is working Fine
Click to expand...
Click to collapse
Before I go on I'm assuming you didn't drop it or got it wet or anything like that.
Now, if you have warranty. I would do a factory data reset. And if your issues are still persisting then call Google support and request a new one.
If you DONT have warranty left, then
I think you should just unlock 5he boot loader, and flash the 4.4 kk stock image, then look for the ota update again, install it and see if your issues disappears. If they do then you can either go for root =] or relock the boot loader and stay bone stock.
The are tons of greats guides for rooting/flashing stock images online and in these forums. Just pick one and follow it.
If you have a Mac I could write one up for you once I ge5 back from work/school around 1p (pacific). Just lmk
Good luck!
Sent from my Nexus 5 using Tapatalk

frarredo said:
Before I go on I'm assuming you didn't drop it or got it wet or anything like that.
Now, if you have warranty. I would do a factory data reset. And if your issues are still persisting then call Google support and request a new one.
If you DONT have warranty left, then
I think you should just unlock 5he boot loader, and flash the 4.4 kk stock image, then look for the ota update again, install it and see if your issues disappears. If they do then you can either go for root =] or relock the boot loader and stay bone stock.
The are tons of greats guides for rooting/flashing stock images online and in these forums. Just pick one and follow it.
If you have a Mac I could write one up for you once I ge5 back from work/school around 1p (pacific). Just lmk
Good luck!
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Let me clear out some points
1) I did not drop
2) i Did not make it wet
3) Till today morning it worked perfectly fine.... then update came.... update successful.... again worked fine for 5 hrs... then all went south... touch screen unresposive...
4) I cannot get past even the lock screen
QUESTIONS
1) To flash stock rom i would require to Enable USB Debugging rite ?
How can i do that... I have no access to tablet
2) Can i flash i mean use the menus required for flashing when my entire screen is unresponsive
3) Should i flash Factory 4.4 Or stable version of 4.3 ie. JSS15R ???
I have a Windows PC

red_ferrari007 said:
Let me clear out some points
1) I did not drop
2) i Did not make it wet
3) Till today morning it worked perfectly fine.... then update came.... update successful.... again worked fine for 5 hrs... then all went south... touch screen unresposive...
4) I cannot get past even the lock screen
QUESTIONS
1) To flash stock rom i would require to Enable USB Debugging rite ?
How can i do that... I have no access to tablet
2) Can i flash i mean use the menus required for flashing when my entire screen is unresponsive
3) Should i flash Factory 4.4 Or stable version of 4.3 ie. JSS15R ???
I have a Windows PC
Click to expand...
Click to collapse
Okay let's do this step by step:
Do you have warranty on your tablet? If yes, then I would call Google support and explain to them the issue.
Question Answers:
1) you are right to use adb you would need to enable USB debugging as far as I know. What I would try is boot into fasstboot by powering it off. Then hold the power button and vol down key for about 12 secs. Then use fastboot to unlock the bootloader that should "basically" do a factory data reset since It will wipe all your user data.
2) if you install a custom recovery like twrp, that's not the touch on, I want to say yes. Because you can use the hardware keys to navagate through it.
3) I would flash factory 4.4 because its stock from Google it is stable. But you can do either or see if it makes a difference.
Now, I've seen around on these forums other people complain about getting defective tablets that have touch screen issue, although I Dont think I have heard of one as severe as yours yet. It could be that you have a defective unit, which is why I strongly suggest to use your warranty if you still have it. Google is pretty good about replacing devices, and there devices are know for having defects. I had a new nexus 5 with a defective screen called Google and got a new one within a week. They even let me use the defective one meanwhile until I got the new unit!
Sent from my Nexus 5 using Tapatalk

Flashing Help
frarredo said:
Okay let's do this step by step:
Do you have warranty on your tablet? If yes, then I would call Google support and explain to them the issue.
Question Answers:
1) you are right to use adb you would need to enable USB debugging as far as I know. What I would try is boot into fasstboot by powering it off. Then hold the power button and vol down key for about 12 secs. Then use fastboot to unlock the bootloader that should "basically" do a factory data reset since It will wipe all your user data.
2) if you install a custom recovery like twrp, that's not the touch on, I want to say yes. Because you can use the hardware keys to navagate through it.
3) I would flash factory 4.4 because its stock from Google it is stable. But you can do either or see if it makes a difference.
Now, I've seen around on these forums other people complain about getting defective tablets that have touch screen issue, although I Dont think I have heard of one as severe as yours yet. It could be that you have a defective unit, which is why I strongly suggest to use your warranty if you still have it. Google is pretty good about replacing devices, and there devices are know for having defects. I had a new nexus 5 with a defective screen called Google and got a new one within a week. They even let me use the defective one meanwhile until I got the new unit!
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Ok i am getting what you are saying...
See....
1) My tablet has been working perfectly for for about 2 months now when it was running Android 4.3 JWR66N.
So i dont think its an hardware issue because i certainly would have faced some problem in whole 60 days !!!
2) The fact that it has started showing some issues... only since past 2 hours and that too immediately after the 4.4 OTA makes me believe that its an software issue...
3) Warranty thing is out of question... Dont ask Why
SO now can you provide a way for me to solve my problem.... will unlocking bootloader as u said erase all data and solve the problem ???
Also to flash stock rom...I will revert back to 4.3... JSS15R
But the question is how can i enable USB Debugging ??? as my touchscreen is completely dead i Mean i can see the wall paper but its unresponsive
Thanks

red_ferrari007 said:
Ok i am getting what you are saying...
See....
1) My tablet has been working perfectly for for about 2 months now when it was running Android 4.3 JWR66N.
So i dont think its an hardware issue because i certainly would have faced some problem in whole 60 days !!!
2) The fact that it has started showing some issues... only since past 2 hours and that too immediately after the 4.4 OTA makes me believe that its an software issue...
3) Warranty thing is out of question... Dont ask Why
SO now can you provide a way for me to solve my problem.... will unlocking bootloader as u said erase all data and solve the problem ???
Also to flash stock rom...I will revert back to 4.3... JSS15R
But the question is how can i enable USB Debugging ??? as my touchscreen is completely dead i Mean i can see the wall paper but its unresponsive
Thanks
Click to expand...
Click to collapse
I can't say for sure that unlocking the bootloader will solve your issue but it will for sure wipe your device. I would recommend creating a back up, but since you can't enable USB debugging to create a backup using adb, you are most likely going to need to be okay with losing all your data first.
As far as I know, I Dont know of any way to enable USB debugging without going into settings first. =\
Check the forums?
I'm at work right now, and I'm also not familiar with the process on a PC. I know how to do it on a mac, since that's what I use and am familiar with. I know that for windows its a very similar process but there are some device specific drivers that you must download and install on your machine before hand.
Without a computer in front of me right now ( I'm at work ) I can't tell you exactly what to do for a PC
Look online there are tons of guides also check you tube.
I should be free later around 2 or 3pm ( pacific ) and if you can't figure it out and would still like to my help. Id be happy to help you then.
Sent from my Nexus 5 using Tapatalk

red_ferrari007 said:
Hello
Today Morning I got an Adroid 4.4 OTA 253.1 MB update for my Nexus 7(2013) WIFI version. My current Build was JWR66N.
The updation was succesful and Tablet was running Properly without any issues..... Then Suddenly after 4-5 Hours all the problems started
1)Screen Partially Unresponsive
2)Not Recognizing the swipe and touch
3)Icons not getting Selected
..AND NOW
4)The Screen is completely UNRESPONSIVE !!!
The tab is working fine... i mean its showing notifications etc... But The screen is unresposive and i cannot even use the Lock Sreen
Please Help !!!!!!!
Click to expand...
Click to collapse
Since rebooting doesn't work (from your PM) I'd suggest flashing JSS15R.
Reading the above posts, it seems your bootloader is not unlocked.
I'm concerned in your current state of mind it isn't good to do things like unlocking the bootloader or flashing stock images as you might make things worse.
First take a few hours off and think about whether you want to try and fix this yourself or just RMA the unit.
It is possible you might be able to fix this yourself but it is also possible you might mess things up even more.
Is there any data on the unit you really need?

i am ready !!!
sfhub said:
Since rebooting doesn't work (from your PM) I'd suggest flashing JSS15R.
Reading the above posts, it seems your bootloader is not unlocked.
I'm concerned in your current state of mind it isn't good to do things like unlocking the bootloader or flashing stock images as you might make things worse.
First take a few hours off and think about whether you want to try and fix this yourself or just RMA the unit.
It is possible you might be able to fix this yourself but it is also possible you might mess things up even more.
Is there any data on the unit you really need?
Click to expand...
Click to collapse
No problems...
I have calmed myself... Bring It On !! i am ready to do whatever you say... warranty and rma is not an option
Start telling me what to do I am Ready !!!

red_ferrari007 said:
No problems...
I have calmed myself... Bring It On !! i am ready to do whatever you say... warranty and rma is not an option
Start telling me what to do I am Ready !!!
Click to expand...
Click to collapse
First step, do you have the USB drivers from google installed? If not download/install from here:
http://developer.android.com/sdk/win-usb.html
Then boot into bootloader (Press/Hold Power+VolDown until bootloader menu comes up)
Then download and unzip this file on your PC
http://forum.xda-developers.com/attachment.php?attachmentid=2405103&d=1384987176
Connect your tablet to the PC via USB cable.
Open up command prompt
Go into the razors-krt16s directory from the unzipping of above file.
type in command line
fastboot oem unlock
follow the directions on the screen. You need to use volup to select yes, and Power to accept.
it will proceed to wipe your user data.
post back when you are done.

i am ready !!!
i am ready...
please guide me with in built steps
I have android SDK ready
I have downloaded Stock Image of JSS15R
Installed USB drivers
DID a Hard Reset

red_ferrari007 said:
i am ready...
please guide me with in built steps
I have android SDK ready
I have downloaded Stock Image of JSS15R
Installed USB drivers
DID a Hard Reset
Click to expand...
Click to collapse
Have you unlocked the bootloader?
---------- Post added at 10:27 AM ---------- Previous post was at 10:22 AM ----------
If you have unlocked the bootloader, follow the directions in this post to flash JSS15J
http://forum.xda-developers.com/showthread.php?p=44888268#post44888268
I am suggesting JSS15J instead of JSS15R because it is the closest factory image to JWR66N that you can get.

DONE !!!
i think its done
the LOCK STATE: UNLOCKED is shown

which u recommend ?
Should I proceed with JSS15J ???

red_ferrari007 said:
Should I proceed with JSS15J ???
Click to expand...
Click to collapse
yes.
Instructions in above post.

ok the file is downloading 10 mins left..
Just had a doubt... To unlock bootloader there is separate files for each version ???

red_ferrari007 said:
ok the file is downloading 10 mins left..
Just had a doubt... To unlock bootloader there is separate files for each version ???
Click to expand...
Click to collapse
No, unlocking the bootloader is the same for all versions. I just pointed you to that addon file because it happened to have the fastboot executable and I had the link handy. The only files that change between the addon files I'm pointing you to is the script (.bat file) that flashes the factory images because the filenames from google are different for every version.
The fastboot executable is the same for all of them.

Last doubt
sfhub said:
No, unlocking the bootloader is the same for all versions. I just pointed you to that addon file because it happened to have the fastboot executable and I had the link handy. The only files that change between the addon files I'm pointing you to is the script (.bat file) that flashes the factory images because the filenames from google are different for every version.
The fastboot executable is the same for all of them.
Click to expand...
Click to collapse
Just one doubt before proceeding
From ur link i downloaded JSS15J stock image
ur guide also mentions to download an addon zip file correct ? but its name is JSS1Q addon,zip
So is it correct ???

I need to extract that addon file to that extracted ? STOCK image file rite ?

Black Screen with LED Notification Shining White

please help my oneplus 3 can't boot to system or recovery after unbricking with mega unbrick method 1 and 2
the phone boot to black screen and led notification shining white
i try unbricking method again and flash recovery from fastboot dosn't work
sorry my english

Did you solved? I have the same issue ... No ideea what to do... How did you solved?

bibiii79 said:
Did you solved? I have the same issue ... No ideea what to do... How did you solved?
Click to expand...
Click to collapse
If you follow the instructions for method 2, and repeatedly do it a few times, you can succeed. The important thing is to follow the instructions strictly, however silly they may look like.

I did several times, double checking all steps, still boot loop. After apply the method 2 , is doing a boot loop. Than I tried to apply again method 2 I have the successful download with green ...than I go in recovery and flash over adb sideload oos 3.2.8 ...than I start , no more boot loop, but after Oneplus logo goes into black screen with a withe stable notification led turned on ....I left over night ... But it keep staying like that until I force to power off by pressing and holding power button( after I want to turn off i cannot only going into bootloader and from there I choose power of, because is automatically turning on if I press and hold only the power button in order to turn off the device).
Pfiu difficult... I am thinking, some files are missing, this , and where I go in bootloader in missing the values on. Bootloader version- , and baseband version- ....

bibiii79 said:
I did several times, double checking all steps, still boot loop. After apply the method 2 , is doing a boot loop. Than I tried to apply again method 2 I have the successful download with green ...than I go in recovery and flash over adb sideload oos 3.2.8 ...than I start , no more boot loop, but after Oneplus logo goes into black screen with a withe stable notification led turned on ....I left over night ... But it keep staying like that until I force to power off by pressing and holding power button( after I want to turn off i cannot only going into bootloader and from there I choose power of, because is automatically turning on if I press and hold only the power button in order to turn off the device).
Pfiu difficult... I am thinking, some files are missing, this , and where I go in bootloader in missing the values on. Bootloader version- , and baseband version- ....
Click to expand...
Click to collapse
The bootloader and baseband versions were missing when i bought the phone new and are still blank today after flashing a few ROMs and Recoveries/Firmware and modems. So that is not an issue.
Are you downloading the correct files?

tnsmani said:
The bootloader and baseband versions were missing when i bought the phone new and are still blank today after flashing a few ROMs and Recoveries/Firmware and modems. So that is not an issue.
Are you downloading the correct files?
Click to expand...
Click to collapse
Yes, I am using the unbrick method with msm download tool, using the Method 2, after apply, installing all's the Qualcomm drivers 9008 , drivers signature off in windows.... The unbrick tool is passed with the green message .... Reversing back to oos 3.1.2 Android 6.0.1 ..stock, I have recovery working and bootloader also working, bootloader is locked ....so I cannot do too mutch. I start the device right away after unbrick tool and still boot to op logo that is going to vibrate as restart .... And stays in boot loop. Next step I go into recovery , and do over sideload an update with a full ROM, oos 4.0.1 , also tried with full ROM 3.2.8 ...I can sideload the whole ROM , than i start the device and after op logo goes in black screen and white motivation led lighted .... I leave it for 30 min, and still in the same, now I force turn off by going into bootloader and power off. Notice that after this sideload flash I cannot access the recovery. So I need to apply back the unbrick msm download tool for op3.
I tried also to flash over sideload a signed script from Ahmed , unified toolkit , to activate the USB debugging, but gives an error.
I run out of ideas .....any help is welcome ....
Thanks

bibiii79 said:
Yes, I am using the unbrick method with msm download tool, using the Method 2, after apply, installing all's the Qualcomm drivers 9008 , drivers signature off in windows.... The unbrick tool is passed with the green message .... Reversing back to oos 3.1.2 Android 6.0.1 ..stock, I have recovery working and bootloader also working, bootloader is locked ....so I cannot do too mutch. I start the device right away after unbrick tool and still boot to op logo that is going to vibrate as restart .... And stays in boot loop. Next step I go into recovery , and do over sideload an update with a full ROM, oos 4.0.1 , also tried with full ROM 3.2.8 ...I can sideload the whole ROM , than i start the device and after op logo goes in black screen and white motivation led lighted .... I leave it for 30 min, and still in the same, now I force turn off by going into bootloader and power off. Notice that after this sideload flash I cannot access the recovery. So I need to apply back the unbrick msm download tool for op3.
I tried also to flash over sideload a signed script from Ahmed , unified toolkit , to activate the USB debugging, but gives an error.
I run out of ideas .....any help is welcome ....
Thanks
Click to expand...
Click to collapse
Hi bro, did you solved it? Im facing the same problem here

bluuquthug said:
Hi bro, did you solved it? Im facing the same problem here
Click to expand...
Click to collapse
Unfortunately not yet ... Yes I solve it, I bought a Moto Z with dual SIM and snapdragon 820 and 64 GB and SD card with 280 euro .... I am disappointed at the moment about Oneplus 3 , I was a Nexus fan and switched to oneplus ... I thought will be opensource ... But way to expensive repair this done in service , Easter to buy another one ... You save time .. you cannot save money on it ..

bibiii79 said:
Unfortunately not yet ... Yes I solve it, I bought a Moto Z with dual SIM and snapdragon 820 and 64 GB and SD card with 280 euro .... I am disappointed at the moment about Oneplus 3 , I was a Nexus fan and switched to oneplus ... I thought will be opensource ... But way to expensive repair this done in service , Easter to buy another one ... You save time .. you cannot save money on it ..
Click to expand...
Click to collapse
Had the same problem with my oneplus x.

P
oneszero said:
Had the same problem with my oneplus x.
Click to expand...
Click to collapse
And what was the end of your story with Oneplus x?

bibiii79 said:
P
And what was the end of your story with Oneplus x?
Click to expand...
Click to collapse
RMA'd it to a service center for repair, after two tech support calls. They actually told me that they couldn't repair it due to "water damage." Funny thing is, that phone was never dropped in or on anything, let alone in WATER. Then to add insult to injury they refused to send it back to me stating that I had to pay for return shipping. My wife got on the phone with them and by the end of the phone call they said that they would send it back for free. HAHA. So I bought a Oneplus 3 after that whole ordeal. All the while the Oneplus X sat in the box on my desk for about 5 months. Last week I decided to pick it up and tinker with it some more. I scoured the net trying to find any other programs or solutions that I hadn't tried prior to sending it off. I came across somethings that I hadn't seen before. https://forum.xda-developers.com/oneplus-x/help/fastboot-mode-available-stuck-kindly-t3387918. http://rootmygalaxy.net/oneplus-x-s...w.pickmod.com/rom/4187/coloros-for-oneplus-x/. Ended up flashing Color OS via msm tool. Wouldn't load OS, but i didn't end up with a black screen and white LED, it just sat there. So right after I flashed Color OS, i Flashed the mini unbrick tool by Naman, and BOOM it booted into OS. Hope this helps.

Z00AD ZE551ml 4 colors flag boot problem

hallo, I have now another problem, i have bricked my phone because i failed click install not this zip as i wanna. and i must use xfstk for install (because i have black screen brick) and now i have black screen or flag 4 colors like this https://zapodaj.net/e808ee12dba6a.jpg.html sorry for this link
and i don't know what do now, asus flash tool don't see phone, on my windows 10 and my friend windows 7 (xfstk see my phone on my friend windows 7 but not on asus flash tools ) the same problem. What can i do to revive my phone !?

I don't know if this will work on Win10 because I use Win7x64.
Power off the phone, open xFSTK, begin download, connect the phone, press and hold power button to power off the phone if the phone tries to power up. It took me a few tries but I finally got xFSTK to load a fastboot screen so I could flash a raw file with the Asus Flash Tool.

Stuck on 4 colour screen .
Some devices have reported to stay on 4 colours and battery discon and recon brings back bootloader for some.
Although , the few times mine has stayed on 4 colours , mine went to bootloader everytime by ;-
1 at 4 colours if staying on 4 colours for more than 20 secs , press and keep pressed power .
2 at the first of the two vibes , be ready and hit download again in xFSTK.....
3 do not discon phone from pc at 4 colours while attempting 1 & 2

Hi . Open back cover. And unscrew middle cover. Deattach sim card holder flex cable from motherboard . It must enter to bootloader. After it attach again sim card flex cable to mainboard. I fix 4 color mode in this way. It works 100%.
pavlogs1920 said:
hallo, I have now another problem, i have bricked my phone because i failed click install not this zip as i wanna. and i must use xfstk for install (because i have black screen brick) and now i have black screen or flag 4 colors like this https://zapodaj.net/e808ee12dba6a.jpg.html sorry for this link
and i don't know what do now, asus flash tool don't see phone, on my windows 10 and my friend windows 7 (xfstk see my phone on my friend windows 7 but not on asus flash tools ) the same problem. What can i do to revive my phone !?
Click to expand...
Click to collapse

LOL oml13 dude! Its work ! haha now i flashing raw file i have now flash imego on asus tool and on my device is write RESULT : OKAY
@ops now i have again flags. flash tool bootlop.... ;/ 15 min later phone reset and back to colours ;/

Try it again. and flash this Raw file http://4pda.ru/pages/go/?u=https://...5xzF4dFKPU2tSDtLwXzvtJK_YpA0LwUht4&e=53383245 by clicking "6_сток_рекавери.bat" in the rar archive. Before you must install asus , intel and adb drivers. Its flash Raw firmware without ASUS flash tool.
pavlogs1920 said:
LOL oml13 dude! Its work ! haha now i flashing raw file i have now flash imego on asus tool and on my device is write RESULT : OKAY
@ops now i have again flags. flash tool bootlop.... ;/ 15 min later phone reset and back to colours ;/
Click to expand...
Click to collapse

Downloading... And have one question. In asus flash tool i must wipe data Yes or NO ?
Asus flash tool don't work. But this bat file in fastboot it works. Now system starting up. Thank you very very much bro! U have virtual beers from me!!! Thank again! meybe i can say problem is solved!

?. Congratulations ,bro! I'm happy for you!
pavlogs1920 said:
Downloading... And have one question. In asus flash tool i must wipe data Yes or NO ?
Asus flash tool don't work. But this bat file in fastboot it works. Now system starting up. Thank you very very much bro! U have virtual beers from me!!! Thank again! meybe i can say problem is solved!
Click to expand...
Click to collapse

Hey again. I have now one more problem. When i 3 days ago testing android 7 its very goo but i have problem with auto awake screen. now i have the same problem on this system and i see my touch screen breaks the line when i write on test app. I test it and when i draw straight line, touch screen break the line and draw again and its breaks randomly. This break is maybe for 0.2-0.4 sec and work again. Sometimes is good for hmm 2 minus without awake screen on my table. This can be a hardware problem or maybe something in software inside? I open back cover and check all tapes and wires. All ok i think. i push to be sure. Any sugestions ?

Hi. I think its not hardware issue. Its software bug. Can you screenshot it. Or record as video ?
pavlogs1920 said:
Hey again. I have now one more problem. When i 3 days ago testing android 7 its very goo but i have problem with auto awake screen. now i have the same problem on this system and i see my touch screen breaks the line when i write on test app. I test it and when i draw straight line, touch screen break the line and draw again and its breaks randomly. This break is maybe for 0.2-0.4 sec and work again. Sometimes is good for hmm 2 minus without awake screen on my table. This can be a hardware problem or maybe something in software inside? I open back cover and check all tapes and wires. All ok i think. i push to be sure. Any sugestions ?
Click to expand...
Click to collapse

Ok, when I back to home I record this with draw touch line setting. And update this on what server?

https://youtu.be/LbhiWk3F0zU
Here is video. Waiting for help ;/
@edit i see in battery usage process 99003 wtf

Refresh

Refresh Again

I have see, when i unplug usb panel, phone doesn't auto awake. i think this problem is becouse flip cover magnetic sensor is broken ;/

I want to root my ZE551ML but I don't know what to do pls help.

I tried to root my phone last night, but I stop midway of the process because of some problems like "phone not turning on with no vibrate at all when I restart after its stuck to inverted white screen, when I luckily turn it back on but it bootloops".
Heres the details:
I run unlock.bat then after its done it reboots with inverted white screen with logo then I run restore.bat and after it restart there is no sign of warning "failed verification" until it fully loads up, I go back to fastboot again to flash TWRP after running twrp.bat it says "flash succesfully" and the program closed by itself, then I go to recovery mode after rebooting I saw android error just like how it use to be. I press power button + volume up then release the volume up then I see the stock recovery (which it should be TWRP since I've done flashing it).
I think that my bootloader is still locked since there's no warning display of "failed verification". So I repeat the steps again after running unlock.bat, it reboots and the screen is inverted but it's stuck up to white logo, I waited for a while but nothing happens so I tried to reboot my phone "holding power button (power off)" when power on, it wont turn on, no vibration just a sound on laptop "connected sound and disconnected sound" I tried to power it on many times but still no luck I got panicked, jittery walking back and forth :crying:. Then I disconnect the usb cable and I tried to turn it on and suddenly I feel the vibration on my phone then it boots up but still stuck in white screen then it restart after keeping it for too long (while watching videos related to my problem)...
then my friend here said "ohh it bootloop" he read the instruction and he said to try this
"FAQ 1. Stuck at white screen with asus logo?
Sol. a) White screen means you are unlocked (action of unlock.bat), so you may give a try to restore.bat in fastboot mode."
and it solve my problem my phone is working again ... But I want to continue to root it but I'm afraid which steps I should go next, I still don't see the warning "failed verification" after my phone boots up and works again... I need HELP thank you
I also got question: is my bootloader unlock since it inverted white screen? or it still locked since there no sign of warning "failed verification"?

@PrinceLys
What is your build number in settings ,about phone ?

timbernot said:
@PrinceLys
What is your build number in settings ,about phone ?
Click to expand...
Click to collapse
ahmm I think this?
model number: ASUS_Z00AD
android version: 6.0.1
software information: WW_4.21.40.223_20161216
P.S my phone is back on working state.
I just don't know if I can proceed to root after the incident. I don't know, I just want to make sure that my bootloader is still unlocked after what I've done (it did white screen with black asus logo) or.... it doesn't unlocked at all since I don't see this warning "your device has failed verification and may not work properly." (I've attach screenshot from the video tutorial)
I tried to manualy check if my bootloader is really on unlock state but I can't using these methods
method 1: on device’s dialer dial *#*#7378423#*#* (failed)
method 2: fastboot oem device-info (failed)
my recovery it still on stock recovery even after I flash twrp
btw guide source: https://forum.xda-developers.com/zenfone2/general/root-install-xposed-marshmallow-6-0-1-t3456443
Q: should I still continue to flash twrp until it install?

Theres 2 bootloader unlock tools in general section , one is automatic

Read this from start to finish before doing anything.. also have on another device to refer to as you are doing the steps also download the ROM and gapps you want and put on SD card before you start even if you have to download them and move them from PC to SD card. https://plus.google.com/113955136844726294013/posts/aLJdNZN3g8q
Sent from my ASUS_Z00A using Tapatalk

timbernot said:
Theres 2 bootloader unlock tools in general section , one is automatic
Click to expand...
Click to collapse
I'm going to look for it... thanks

musicman5844 said:
Read this from start to finish before doing anything.. also have on another device to refer to as you are doing the steps also download the ROM and gapps you want and put on SD card before you start even if you have to download them and move them from PC to SD card. https://plus.google.com/113955136844726294013/posts/aLJdNZN3g8q
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
I've haven't fully read the instruction maybe tomorrow I will read it.
I just downloaded the files early and look into it... it seems like the versions are kinda latest (I don't know much about the droidboot ver. but I just look at the number on it "the higher the latest /heh") also the twrp is 3.0.3.
the ones that I used are all in package and it was 3.0.2 so I kinda go for the link you gave me
Thanks :good:

Hi,I've had the same situation,but it is solved now.If you have any problem,maybe I can help you .

nanobrain---- said:
Hi,I've had the same situation,but it is solved now.If you have any problem,maybe I can help you .
Click to expand...
Click to collapse
(I've finally think my bootloader is unlock after all.)
btw, did you succesfylly flash twrp?
Mine didn't flash (using twrp.bat), I guess I will try it again tonight if it fails again im gonna dl twrp from official and manually flash it.

Faulty display replacement or software issue?

So I broke my screen kept it lying around for 24 months then finally got it fixed this week
After replacement my power button doesn't wake up the screen at once
prolly press 20 times before it wakes up
The capacitive buttons light up on each press and even vibrates with fingerprint but screen stays off
It works fine in twrp lock screen. Locks and wakes up properly there.
The repair guy said that it's a software problem so he'll software reset it for for me I send it back
just clean flash havoc os latest but still the same problem

DrDarthZ said:
So I broke my screen kept it lying around for 24 months then finally got it fixed this week
After replacement my power button doesn't wake up the screen at once
prolly press 20 times before it wakes up
The capacitive buttons light up on each press and even vibrates with fingerprint but screen stays off
It works fine in twrp lock screen. Locks and wakes up properly there.
The repair guy said that it's a software problem so he'll software reset it for for me I send it back
just clean flash havoc os latest but still the same problem
Click to expand...
Click to collapse
you have to flash caesium kernel as he probably replaced screen with cheap version not real one,so flash this https://github.com/msfjarvis/oneplus3/releases/tag/CalumniousCarambola its the top one if on pie rom and u will be good

thanks that worked, but why does only this kernel work ?

ireaper4592 said:
you have to flash caesium kernel as he probably replaced screen with cheap version not real one,so flash this https://github.com/msfjarvis/oneplus3/releases/tag/CalumniousCarambola its the top one if on pie rom and u will be good
Click to expand...
Click to collapse
Can I install this kernel on latest OOS?

Hey guys
My ONEPLUS 3 display got broke down.
So I went for a display replacement in service centre.
For which they charged me 7500/- ₹
But after replacement.. the phone is crashig a lot.
I need to press power button end number of times & still the phone won't respond.
I don't know why this is happening.
Can someone suggest a solution?
Currently the device is on - Oxygen OS 9.0.5 (non-rooted)
Please help! ?

please try and unbrick your device by downloading this tool https://androidfilehost.com/?fid=6006931924117936392 then run msm download tool as administrator

kallum7 said:
please try and unbrick your device by downloading this tool https://androidfilehost.com/?fid=6006931924117936392 then run msm download tool as administrator
Click to expand...
Click to collapse
will this wipe device internal storage??

Lucifer213_ said:
will this wipe device internal storage??
Click to expand...
Click to collapse
yes

kallum7 said:
yes
Click to expand...
Click to collapse
what about caseium kernel?
someome told me to install it..but im not sure if it supports oxygen os latest build.

Lucifer213_ said:
what about caseium kernel?
someome told me to install it..but im not sure if it supports oxygen os latest build.
Click to expand...
Click to collapse
nope because the system drivers are corrupt so it needs to be reset by unbricking the device

ok thanks, but can u explain me the steps , cause i don't exactly know how to unbrick. Cause I've never done so.
I don't want anything wrong to happen.

Lucifer213_ said:
ok thanks, but can u explain me the steps , cause i don't exactly know how to unbrick. Cause I've never done so.
I don't want anything wrong to happen.
Click to expand...
Click to collapse
Firstly download the unbrick tool I have sent you through the link then switch off your phone and make sure cable is unplugged then hold the volume up button on your phone and then plug in the USB cable to the computer and phone then on your computer and open device manager and make sure under ports it says Qualcomm 9 and then extract the unbrick tool then run mam as admin then click start

Lucifer213_ said:
ok thanks, but can u explain me the steps , cause i don't exactly know how to unbrick. Cause I've never done so.
I don't want anything wrong to happen.
Click to expand...
Click to collapse
This has a collection of unbrick tools and versions of OOS.
This contains detailed instructions also.
Hope you solve your problem.
If not and you still have warranty for the display (OnePlus gives atleast 3 months warranty on replacement), take the phone to the Service Center. In fact, if you have warranty, that should be the first option.

Thanks for the response.
But I don't think my device is bricked, cause the phone is on working mode, but it's just that whenever I lock my phone.. It does not gets unlock on the first attempt. I need to press the unlock/power button end number of times & the phone still don't responds. It gets crashed and the System UI error occurs & asks for force stop & the phone is lagging a lot. I can't even use it properly.

I would still recommend doing it

have you got it sorted

kallum7 said:
have you got it sorted
Click to expand...
Click to collapse
I'll do it today/tomorrow
& Share the details.

kallum7 said:
have you got it sorted
Click to expand...
Click to collapse
I completed the process.
But it's still happening.
Not that much. But it is happening every 5th time I try to unlock my phone.

By this point you have two options get another device or get your op3 and take it to a OnePlus service center and get it repaired

kallum7 said:
By this point you have two options get another device or get your op3 and take it to a OnePlus service center and get it repaired
Click to expand...
Click to collapse
OnePlus service is worse.
I guess I need to purchase a new smartphone then, or find some other solution.