Related
Hello all
Official CM 12.1 nightlies based on Android Lollipop 5.1.1 for Find 7A/S have been officially released effective 22nd April 2015. Its time to thank the entire CyanogenMod Team and @[U]jajb[/U] for their efforts in the development and encourage them to keep supporting us the same way in the future.
Let the flashing go on!!!!:highfive:
Nightly Downloads
CM12.1 Find 7A
http://download.cyanogenmod.org/?device=find7
CM12.1 Find 7S (QHD)
http://download.cyanogenmod.org/?device=find7s
5.1 Minimal Gapps (for a light and blazzing fast experience):highfive:
https://www.androidfilehost.com/?fid=95916177934550851
Installation Instructions
Coming from 5.0 or less ROMS
Download cm-12.1-xxxxxxxx-NIGHTLY-find7x.zip to your sdcard
Boot into Recovery
Wipe data, cache & dalvik cache
Flash cm-12.1-xxxxxxxx-NIGHTLY-find7x.zip from sdcard
Flash 5.1 Minimal GApps.zip from sdcard
Reboot:highfive:
Coming from previous CM 12.1 build
Wipe cache & dalvik cache
Flash cm-12.1-xxxxxxxx-NIGHTLY-find7x.zip from sdcard
Reboot:highfive:
Somebody successfully flashed it ? It works ?
raber111 said:
Somebody successfully flashed it ? It works ?
Click to expand...
Click to collapse
It doesn't work. http://forum.xda-developers.com/showpost.php?p=58255547&postcount=397
I tried to flash the last CM11 build and I'm still stucked there.
Anyone tried 20150119 build yet? is it working??
CyanPile said:
Anyone tried 20150119 build yet? is it working??
Click to expand...
Click to collapse
It seems so, but wifi is terribly slow.
It's going to be announced soon in CM's blog, but find7a and find7s are split now and get separate builds. You need to flash "find7" on find7a devices and "find7s" on find7s qhd devices. You should update the recovery too, but I think there are no recovery images available yet. I might provide some if nobody else does it.
I successfully flashed cm 12 1901 build . WiFi works normally. Fonts and icons too small
on 2.0.4
Can we flash this on color os 2.0.4 version without any issues or have to downgrade to 1.2.7
sheraz1015 said:
Can we flash this on color os 2.0.4 version without any issues or have to downgrade to 1.2.7
Click to expand...
Click to collapse
You will have to flash it over 1.2.x Color OS. I flashed 19 build over 1.2.7.
Installed without an issue.
For QHD use Find 7s version.
mikeioannina said:
It's going to be announced soon in CM's blog, but find7a and find7s are split now and get separate builds. You need to flash "find7" on find7a devices and "find7s" on find7s qhd devices. You should update the recovery too, but I think there are no recovery images available yet. I might provide some if nobody else does it.
Click to expand...
Click to collapse
Thank for your
help and shall flash it.
Its there any way to backup imei of oppo find 7
ganeshbiyer said:
You will have to flash it over 1.2.x Color OS. I flashed 19 build over 1.2.7.
Installed without an issue.
For QHD use Find 7s version.
Click to expand...
Click to collapse
Sent from my LG-D802 using XDA Premium 4 mobile app
You can always use tantrums recovery flasher...they recently updated to v10.....has all the latest recoveries
Anyone having problems when using unified partition layout? After I flashed the ROM the phone just tells me that there's an encryption error and I have to wipe data. I wiped data and still the same error. When I went back to previous ROM I'm using everything else is fine, except with the proximity sensor bug. Cheers
darthbadar said:
Anyone having problems when using unified partition layout? After I flashed the ROM the phone just tells me that there's an encryption error and I have to wipe data. I wiped data and still the same error. When I went back to previous ROM I'm using everything else is fine, except with the proximity sensor bug. Cheers
Click to expand...
Click to collapse
De-unify first, then flash. You need to have to revert back to 1.2.x.
Flash Open TWRP and then flash CM12 Nightlies. COs 1.2.x and CM12 do not support Unification.
ganeshbiyer said:
De-unify first, then flash. You need to have to revert back to 1.2.x.
Flash Open TWRP and then flash CM12 Nightlies. COs 1.2.x and CM12 do not support Unification.
Click to expand...
Click to collapse
Soo, there's no way I'm using CM12 Nightlies with unified storage? Thanks for answering man. :highfive:
Changelog ?
changelog here http://www.cmxlog.com/12/find7/
and here http://www.cmxlog.com/12/find7s/
Chrome
Is the only way to switch between tabs the recent apps thingy? I mean I don't habe a problem but still kinda awkward not knowing where the tab went. BTW I got twrp 2.8.4 and there's always this horizontal line where the display shifts. It's like these lines on old videos that walk through the picture. Trying my best on English (I'm German )
alex1.salge said:
Is the only way to switch between tabs the recent apps thingy? I mean I don't habe a problem but still kinda awkward not knowing where the tab went. BTW I got twrp 2.8.4 and there's always this horizontal line where the display shifts. It's like these lines on old videos that walk through the picture. Trying my best on English (I'm German )
Click to expand...
Click to collapse
Regarding the line in recovery, use Nameless TWRP recovery from HERE.
I have not tried the latest TWRP Open Recovery 2.8.4 for Find7, but with Nameless TWRP Recovery, I am able to use OTG in recovery. This allows me to take backups into 32gb usb drive and restore from there.
Custom Ringtones
Hello Just flashed to build 2015/01/21 and I noticed that I was unable to change my ringtone. This may seem like a trivial thing but I would just like to know if it's my device specific. Find 7a running CM12 stock kernels and all.
Edit: Turned off NuPlayer in developers options and set SELinux Kernel to Permissive.
Enyioha said:
Hello Just flashed to build 2015/01/21 and I noticed that I was unable to change my ringtone. This may seem like a trivial thing but I would just like to know if it's my device specific. Find 7a running CM12 stock kernels and all.
Edit: Turned off NuPlayer in developers options and set SELinux Kernel to Permissive.
Click to expand...
Click to collapse
sorry for noob question
how can I change SELinux Kernel to Permissive ?
Missing languages
In the 21/01 build, some languages are missing - texts simply do not appear and the language list is empty near the end.
EDIT:
23/01 build solves it.
EDIT2:
Gyro doesn't work, screen doesn't rotate.
Hello. I'm tired to have 180 apps by default. I need a d855 rom with just a few apps so my internal memory does not get full so easily. Can you help me please?
@4djes: try Pixel: stable, slim, fast AOSP-Nougat.
4djes said:
Hello. I'm tired to have 180 apps by default. I need a d855 rom with just a few apps so my internal memory does not get full so easily. Can you help me please?
Click to expand...
Click to collapse
Any AOSP ROM.
For Example:Lineage OS 14.1,Cr.droid,AOSP extended and more.
I use Lineage OS 14.1 which has weekly updates,fast and nice for dialy usage.
rp158 said:
@4djes: try Pixel: stable, slim, fast AOSP-Nougat.
Click to expand...
Click to collapse
Thanks!
Sotiris02 said:
Any AOSP ROM.
For Example:Lineage OS 14.1,Cr.droid,AOSP extended and more.
I use Lineage OS 14.1 which has weekly updates,fast and nice for dialy usage.
Click to expand...
Click to collapse
Can you send me the link with all what is needed to download and install?
4djes said:
Can you send me the link with all what is needed to download and install?
Click to expand...
Click to collapse
https://forum.xda-developers.com/lg...-cyanogenmod-14-0-experimental-lg-g3-t3464062
Everything that is needed for the ROM is there.
Download weekly ROM
Su add-on
Opengapps
And Modem 21c
Move them to the SD Card and reboot to TWRP
Do a full wipe (except SD Card)
Flash Modem 21c,then the ROM,then GApps,Su add-on and reboot.
Clean ROM is a stock rom with an extreme debloat option in Aroma.
Btw 180 app are not that much, did u tried to clean the cache or maybe to upload photos in the cloud on google photo app?
Android 8.x
https://sourceforge.net/projects/cheeseburgerdumplings/files/15.1/cheeseburger/recovery/
Changes:
- TWRP 3.2.3 from android-8.1
- added vendor partition
Sources
https://github.com/TeamWin/android_device_oneplus_cheeseburger/tree/android-8.1
https://github.com/lineageos/android_kernel_oneplus_msm8998/tree/lineage-15.1
################################################################################################
Android 9.x (requires Pie firmware)
https://sourceforge.net/projects/cheeseburgerdumplings/files/16.0/cheeseburger/recovery/
Changes:
twrp-3.3.1-0-20190713-codeworkx-cheeseburger.img
- fix bug in default device properties
twrp-3.3.1-1-20190623-codeworkx-cheeseburger.img
- add support for synthetic password version 3 (may update)
twrp-3.3.1-0-20190427-codeworkx-cheeseburger.img
- updated twrp to 3.3.1
- removed compatibility check
- removed twrp app check
- modified version string
Sources
https://github.com/TeamWin/android_device_oneplus_cheeseburger/tree/android-9.0
https://github.com/lineageos/android_kernel_oneplus_msm8998/tree/lineage-16.0
Tested/ working fine Running Oero Public Beta 2 with encrytion enabled,
thanks
Data decryption seems to be working fine on oos5 with encryption enabled
Not working with omnirom encrypted........will try with others when got time...
canteo said:
Not working with omnirom encrypted........will try with others when got time...
Click to expand...
Click to collapse
Which version of omni?
File based or full disk encryption?
Ext4 or F2FS?
Which oneplus firmware version 4.5.15?
codeworkx said:
Which version of omni?
File based or full disk encryption?
Ext4 or F2FS?
Which oneplus firmware version 4.5.15?
Click to expand...
Click to collapse
Upps... it is true, i am sorry, last omnirom it's 8.1 and all of us know that none twrp is working decrypting data
omni 8.1, ext4, flashed over second last oreo oss test rom( second open beta) before 5.0 oss with full disk encryption( i think..)
canteo said:
Upps... it is true, i am sorry, last omnirom it's 8.1 and all of us know that none twrp is working decrypting data
omni 8.1, ext4, flashed over second last oreo oss test rom( second open beta) before 5.0 oss with full disk encryption( i think..)
Click to expand...
Click to collapse
We'll get that fixed during next few days.
So this TWRP is to decrypt a encrypted rom?
obol2 said:
So this TWRP is to decrypt a encrypted rom?
Click to expand...
Click to collapse
Decrypt and access userdata when running OxygenOS 5.0 (Oreo). Probably mainly for doing backups and restores.
Amazing! It's working for both FBE and FDE?
codeworkx said:
Please test data decryption.
Click to expand...
Click to collapse
Working perfectly on my OP5 with Oreo (non-beta) encrypted.
Can confirm that it can see encrypted data, backup and restore perfectly!
Great job!!
Sent from my OnePlus5, OOS Oreo, Flash Kernel
Big Thanks, @codeworkx Testing features now and usb-otg is not working. I see the commit but I dont know if it's a oreo thing but you could add this line in init.recovery.qcom.rc
write /sys/class/power_supply/usb/otg_switch 1
Testing on official oreo release on Christmas release, on FBE encryption- only made a backup so far, will report more later.
Thanks also for posting additional commits also.
Works perfectly. Encrypted OP5 (Oreo FBE);and tested with several Rom upgrades with no issues.
morgoth6 said:
Works perfectly. Encrypted OP5 (Oreo FBE);and tested with several Rom upgrades with no issues.
Click to expand...
Click to collapse
Did you try xxx 9.2 on your encrypted device?
mcduffie2010 said:
Did you try xxx 9.2 on your encrypted device?
Click to expand...
Click to collapse
Yes. I installed 9.2 over 9.1a +Flash kernel and it works just fine. To be honest I read all the comments about xxx upgrade on encrypted OP5 after that ... Sic. Glad it worked for me.
morgoth6 said:
Yes. I installed 9.2 over 9.1a +Flash kernel and it works just fine. To be honest I read all the comments about xxx upgrade on encrypted OP5 after that ... Sic. Glad it worked for me.
Click to expand...
Click to collapse
I posted your findings on the xxx thread. Hope it helps people.
mcduffie2010 said:
I posted your findings on the xxx thread. Hope it helps people.
Click to expand...
Click to collapse
I wonder what can produce this problems. I personally like to have encrypted device, but makes me think twice before update to new ROM now.
Is there a way to check what kind of encryption is used ? I mean FDE or FBE (or both) ? Maybe the problem is there. I buy this phone quite recently and started with clean Oreo (with format data) so I probably ended with ext4/FBE. Maybe problematic cases used FDE+FBE ?
I would like to see someone find what can be the cause for this problems as clean install or reinstalling Rom ten times is not a solution :/
morgoth6 said:
I wonder what can produce this problems. I personally like to have encrypted device, but makes me think twice before update to new ROM now.
Is there a way to check what kind of encryption is used ? I mean FDE or FBE (or both) ? Maybe the problem is there. I buy this phone quite recently and started with clean Oreo (with format data) so I probably ended with ext4/FBE. Maybe problematic cases used FDE+FBE ?
I would like to see someone find what can be the cause for this problems as clean install or reinstalling Rom ten times is not a solution :/
Click to expand...
Click to collapse
I agree but like I said in xxx thread I can't test because I'm decrypted and planning to stay that way. Hopefully people are gonna test it and than we know or get feedback.
morgoth6 said:
I wonder what can produce this problems. I personally like to have encrypted device, but makes me think twice before update to new ROM now.
Is there a way to check what kind of encryption is used ? I mean FDE or FBE (or both) ? Maybe the problem is there. I buy this phone quite recently and started with clean Oreo (with format data) so I probably ended with ext4/FBE. Maybe problematic cases used FDE+FBE ?
I would like to see someone find what can be the cause for this problems as clean install or reinstalling Rom ten times is not a solution :/
Click to expand...
Click to collapse
Afaik oxygen is using keymaster1 and lineage/omni/aosp are using keymaster3. That seems to be a problem.
The upgraded firmware is also a problem for old twrp builds using N libs.
Sent from my OnePlus5T using XDA Labs
mcduffie2010 said:
I posted your findings on the xxx thread. Hope it helps people.
Click to expand...
Click to collapse
Thanks for your help, I tried to flash this TWRP via fastboot but same issue as before, can't seem to ask for a password in order to decrypt storage. I'm trying to sideload 9.2 to see if it can work by flashing on it again, we never know... In either case I'm screwed lol.
Any way to decrypt storage using a flashable zip in TWRP? Like no_verity, etc ? I feel like the answer is no since it will say that it is decrypted, but it won't decrypt the data that is already encrypted (would be too easy right?).
Important
Repartition your phone before installing this ROM
https://forum.xda-developers.com/nokia-x/general/tutorial-how-to-partition-nokia-x-xl-t3450079
Working:
Everything
Not working
No FM
offline charge
Before you install:
Clean flash is recommended
How to install:
1.Boot into TWRP 3.1.1 or 2.8.7.0
2.Flash ROM
3.Reboot
4.First boot will take around 10-20min
Note
-Install Kernel Adiutor and change CPU Governor to OnDemand
Download Link:
Discontinued
XDA:DevDB Information
CyanogenMod 13, ROM for the Nokia X
Contributors
Sofiane omega, weritos, Cyanogen
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Any
Version Information
Status: Stable
Current Stable Version: 2018-01-20
Stable Release Date: 2018-01-20
Created 2018-12-04
Last Updated 2018-12-04
I wish it worked on xl. I m too afraid to give it a try though..
upload the link...........
please
please
please
please
please
upload the link...........
please
please
please
please
please
Gonna try it later. : )
Where's the patch and the mod?
No patch how we gonna flash this? (( Please upload it
Upload please.
Sent from my NOKIA x using XDA Labs
Update
can be installed without patch or mod ready just read instruction that all
Please give link for the patch!!!
Error 7 when installing with twrp3.0.2 and i used the repartitioning zip.
1. Wiped everything except sd card
2. Flashed the zip
3. Tried flashing rom.
Then error 7 showed up
Hello Sofiane Omega,
First of all, thank you for this amazing ROM for Nokia X. This ROM is faster than the previous Lineage 13 for Nokia X.
For those who could not install this ROM, please read and follow the instructions carefully.
In my case, I could not use builder.prop in the post.
After I installed the ROM, I installed Delta GAPP in this link
I need Google Play to install an app for chating and I could not make MicroG to run Google Play service. So I use Delta GAPP instead.
Any questions about installing this ROM are welcome. I will try to answer as much as I can.
Regards,
shirshak 1234 said:
Error 7 when installing with twrp3.0.2 and i used the repartitioning zip.
1. Wiped everything except sd card
2. Flashed the zip
3. Tried flashing rom.
Then error 7 showed up
Click to expand...
Click to collapse
Try repartition manually from the link in the post. I also could not get the repartitioning zip to work.
You also need TWRP 3.1.1 or may be 3.2.1 to install the ROM.
This ROM is great. Hope you can install it soon.
siamese007 said:
Try repartition manually from the link in the post. I also could not get the repartitioning zip to work.
You also need TWRP 3.1.1 or may be 3.2.1 to install the ROM.
This ROM is great. Hope you can install it soon.
Click to expand...
Click to collapse
Hi @siamese007
Did dual sim work with this ROM?
Anything that you feel not working.
I am thinking about giving this a try soon!
Syncnister said:
Hi @siamese007
Did dual sim work with this ROM?
Anything that you feel not working.
I am thinking about giving this a try soon!
Click to expand...
Click to collapse
The dual sim works fine. I have not tried all of the features. But from my daily use, this ROM is good enough.
The only problem is GAPPs. I am using Delta GAPP. Once I install Delta GAPP, phone is slowing down.
I tried to use A GAPP but the system partition is not enough for this. And I don't know how to re-partition to create bigger system partition.
If someone can modify A GAPP to use with this ROM, it will be perfect. A GAPP is very light and can be used with old phone really well.
siamese007 said:
Hello Sofiane Omega,
First of all, thank you for this amazing ROM for Nokia X. This ROM is faster than the previous Lineage 13 for Nokia X.
For those who could not install this ROM, please read and follow the instructions carefully.
In my case, I could not use builder.prop in the post.
After I installed the ROM, I installed Delta GAPP in this link
I need Google Play to install an app for chating and I could not make MicroG to run Google Play service. So I use Delta GAPP instead.
Any questions about installing this ROM are welcome. I will try to answer as much as I can.
Regards,
Click to expand...
Click to collapse
so regarding build.prop use this file and flash it some problem will get fixed
and for gapps they slow down the phone a lot that why i never used them i download from apkmirror,apkpure or f-droid and you better use lite version of what you want to use (fb lit,m lite,line lite..etc)
siamese007 said:
The dual sim works fine. I have not tried all of the features. But from my daily use, this ROM is good enough.
The only problem is GAPPs. I am using Delta GAPP. Once I install Delta GAPP, phone is slowing down.
I tried to use A GAPP but the system partition is not enough for this. And I don't know how to re-partition to create bigger system partition.
If someone can modify A GAPP to use with this ROM, it will be perfect. A GAPP is very light and can be used with old phone really well.
Click to expand...
Click to collapse
which version did you try i think i could help with that if you tell me
Sofiane omega said:
which version did you try i think i could help with that if you tell me
Click to expand...
Click to collapse
Hello Sofiane Omega,
Thank you for your attention.
I have tried A-GAPPs for Android 6.0.1 in this link.
Before this, I tried microG for GAPP in this link but could not get the Play Store up. I have tried microG on Samsung Galaxy S in this link. This is very light weight. I don't know how the developer create this microG for his build of Samsung Galaxy S1 ROM. The ROM runs very smooth with this microG and I can enter Play store that I need.
Your ROM is very cool. Works best so far for Nokia X. Really smooth for this limited RAM.
Regards, :good::good::good:
siamese007 said:
Hello Sofiane Omega,
Thank you for your attention.
I have tried A-GAPPs for Android 6.0.1 in this link.
Before this, I tried microG for GAPP in this link but could not get the Play Store up. I have tried microG on Samsung Galaxy S in this link. This is very light weight. I don't know how the developer create this microG for his build of Samsung Galaxy S1 ROM. The ROM runs very smooth with this microG and I can enter Play store that I need.
Your ROM is very cool. Works best so far for Nokia X. Really smooth for this limited RAM.
Regards, :good::good::good:
Click to expand...
Click to collapse
sorry but i already tried micro g and i never get signature spoofing to be set true and you could make it work but xposed never did function properly no matter what i did
i used this rom on my x as daily drive with and without gapps if you need gapps flash them but make sure you don't install so much app and don't over do your phone
and i hope you liked the new way your phone look and flash build.prop that i sent you it will correct some problem and fix some bug
thank you for using my rom have great day
Sofiane omega said:
sorry but i already tried micro g and i never get signature spoofing to be set true and you could make it work but xposed never did function properly no matter what i did
i used this rom on my x as daily drive with and without gapps if you need gapps flash them but make sure you don't install so much app and don't over do your phone
and i hope you liked the new way your phone look and flash build.prop that i sent you it will correct some problem and fix some bug
thank you for using my rom have great day
Click to expand...
Click to collapse
OK. No problem.
I may try to repartition to increase system partition for install A-gapp.
Nokia X is very limited resource. I used to try install many apps and the phone brick in the end.
Thank you anyways for the nice ROM. :good::good:
Samsung Experience9.2
Hello everyone, this is the second ROM I made for V30
This ROM is from Samgsung A6
IMPORTANT: VENDOR PARTITION NEEDED BEFORE FLASHING!
Make sure you have VENDOR PARTITION on your device before flashing the rom or else you will get boot loop or brick. You can check the forum for how to enable vendor partition or treble on your device.
HOW TO MAKE VENDOR?
Use this file for creating vendor Partition by flash in twrp.
Make backup first before flashing.
Flash zip, go to wipe and advance, select resize partition, then select vendor, choose where you want to create the vendor partition from( system recommend, and also the size should be 512 and above)
After creating the vendor partition, reboot recovery and format system, vendor and caches. Now you can flash rom.(copy from miui11 port same work on SE9.2)
The vendor zip is herehttps://1drv.ms/u/s!ArSQ9UltpYJiuQsXTObSAjJZbJtI?e=8MX9JA
BUGS:NFC,Can't stop AOD in setting(You can delete in ROOT EXPLORER)
How install my rom
This rom is a backup ROM
1.UNZIP MY ROM TO SDCARD/TWRP
2.WIPE DATA
3.RESTORE MY ROM IN TWRP
4.REBOOT
This ROM has alredy get trCAMERA(GOOGLE CAMERA)
And GMS CORE
If you want install google play
Please flash GAPPS
ROM Download linkhttps://sexgril-my.sharepoint.com/:u:/g/personal/nb10025_oa_nanv_club/EUNwmfhWDMVKmo9rDLUy32UBS-cklpixj_bu1Q3UXAhNFA?e=X5EMaN
SOME SCREEN SHOTS AT LAST
SOURCE CODE
KERNEL :https://github.com/SGCMarkus/android_kernel_lge_msm8998
Thanks for SGCMakus
Thank you for your hard work.
for your miui12 rom:
quick settings flashlight (torch) don't work;
and is there any way to port an fm radio for it.
for the USB files transfer the fix is to enable the USB debugging from the Developer options.
Noiiiice, just in case you need to have some feedbacks from your rom (or need for some testing), or hear the advice of other devs working on the v30, you can always stop by our telegram groups: t.me/LGEV30
Of course all the major updates will still get published here on XDA
4shared said:
Thank you for your hard work.
for your miui12 rom:
quick settings flashlight (torch) don't work;
and is there any way to port an fm radio for it.
for the USB files transfer the fix is to enable the USB debugging from the Developer options.
Click to expand...
Click to collapse
Thank you for your feedback the flashlight you can just try to edit system/build.prop to cheat miui you are a xiaomi device,other bugs I''m still try to fix ,thank you a lot
What is the name of the AOD app. i want to disable it.
Nice bro
But i think you shoud creat telegram team for your work. I love miui 12 rom but miui thread is closed
drnvt1592 said:
Nice bro
But i think you shoud creat telegram team for your work. I love miui 12 rom but miui thread is closed
Click to expand...
Click to collapse
We already have Telegram V30 Dev thread for ROMs. But best they still be posted here. In telegram everyone keep asking the same questions over and over. Here they can and should read to get answers immediately, because they have been asked before.
Its been great time for v30 getting new roms to try on..any more bugs other than mentioned above?
4shared said:
What is the name of the AOD app. i want to disable it.
Click to expand...
Click to collapse
Hay man a great news for you,I'm alredy power on MIUI12 BASED ANDROID Q!My friends and i works for it for four mounths
mkhalilmoin said:
Its been great time for v30 getting new roms to try on..any more bugs other than mentioned above?
Click to expand...
Click to collapse
That'all
SKDushow said:
Hay man a great news for you,I'm alredy power on MIUI12 BASED ANDROID Q!My friends and i works for it for four mounths
Click to expand...
Click to collapse
It's really great news. And so wonderful.
We're waiting for it.
So did you manage to get treblised the Q vendor ? so we can flash other Q gsi roms?
SKDushow said:
Hay man a great news for you,I'm alredy power on MIUI12 BASED ANDROID Q!My friends and i works for it for four mounths
Click to expand...
Click to collapse
Great bro. I love it
4shared said:
It's really great news. And so wonderful.
We're waiting for it.
So did you manage to get treblised the Q vendor ? so we can flash other Q gsi roms?
Click to expand...
Click to collapse
Q gsi roms isn't work now,but sgsi is works good
4shared said:
It's really great news. And so wonderful.
We're waiting for it.
So did you manage to get treblised the Q vendor ? so we can flash other Q gsi roms?
Click to expand...
Click to collapse
My friends rebuild kernel to support sar,so we can run SGSI like A/B device
4shared said:
Thank you for your hard work.
for your miui12 rom:
quick settings flashlight (torch) don't work;
and is there any way to port an fm radio for it.
for the USB files transfer the fix is to enable the USB debugging from the Developer options.
Click to expand...
Click to collapse
how did you manage to install miui, i am getting the error 7 due to 6gb less system partition, plz guide, i have v300 korean version
SKDushow said:
Hay man a great news for you,I'm alredy power on MIUI12 BASED ANDROID Q!My friends and i works for it for four mounths
Click to expand...
Click to collapse
hahmad78 said:
how did you manage to install miui, i am getting the error 7 due to 6gb less system partition, plz guide, i have v300 korean version
Click to expand...
Click to collapse
Me too. Wait for next build
hahmad78 said:
how did you manage to install miui, i am getting the error 7 due to 6gb less system partition, plz guide, i have v300 korean version
Click to expand...
Click to collapse
I will make system size smaller next time
hahmad78 said:
how did you manage to install miui, i am getting the error 7 due to 6gb less system partition, plz guide, i have v300 korean version
Click to expand...
Click to collapse
US998's system size is 7gb
SKDushow said:
I will make system size smaller next time
Click to expand...
Click to collapse
Miui support dual sim on h930ds version bro?