Related
I recently installed miui from official website for lg e975. My phone is lg f180 so they both are same.
It was working fine till this morning it asked for update. I allowed. It retarted and now it starts shows google logo. Then goes to recovery.
I flashed my original backup rom. Then even flashed miui rom. Nothing changes. I wiped cache. Data dalvik a lot of times.
It just starts shows google logo. Goes to recovery. Please help
Im sorry if this thread doeant belong here. Mods please move
Thought i should add.
I dont have any other access but cwm recovery
I only have a backup of my original rom through cwm. No kdz files.
I have a miui zip rom on phone as well
awais3344 said:
Thought i should add.
I dont have any other access but cwm recovery
I only have a backup of my original rom through cwm. No kdz files.
I have a miui zip rom on phone as well
Click to expand...
Click to collapse
Flash stock zip kernel from artmod thread.
the problem is. I can't upload any files to mobile phone. if i connect to pc, it turns on, goes to recovery, so I click on mount storage, and other mount option, nothing happens. My computer detects phone as F180L with a exclamation mark.
If i go to download mode, and then try to flash any KDZ file from all the f180 KDzs. It gives me errors.
LG Support Tool on entering serial number and model name says "check out serial number and model"
ADB never detects my phone. So I can't upload anything.
No option to upload files via SD Card.
ok, so I have no clue what happened :crying: phone was in download mode. I did nothing, but only installed LG Support Tool USB driver, while the mobile connected.
Then I installed Microsoft .net framework 4.0. And my phone is now qhs_usbdload. it's officially bricked now. I have no clue what happened. This is all that happened before I restarted and selected "reboot to bootloader" and its dead. So there's nothing left to do but throw it out
WTF OKAY! I have no clue!
But, after seeing that qhs usbdload. (i have seen that before with other phones). I complete lost any hope.
So I for feeling contended, downloaded qpst, and emmc software download, and selected MPRG8064.hex and msimage.bin.
Then like I expected it threw an error "image download failed, cookie if present not received"
so I lost hope disconnected my phone and put it there. After a few minutes thought I should try one last time.
so I connect it my pc and VIOLA it turns ON!?
now I have that same rebooting to recovery problem. I have no explanation for whatever has happened to phone in past 3 hours. I have been with phones for years. This is the weirdest thing to happen ever :angel:
Now someone, please help me?
1. Why is this in Development section?
2. You can't mount internal SD as USB storage. Use adb push or adb sideload instead, that will help you to get the files onto your phone.
awais3344 said:
WTF OKAY! I have no clue!
But, after seeing that qhs usbdload. (i have seen that before with other phones). I complete lost any hope.
So I for feeling contended, downloaded qpst, and emmc software download, and selected MPRG8064.hex and msimage.bin.
Then like I expected it threw an error "image download failed, cookie if present not received"
so I lost hope disconnected my phone and put it there. After a few minutes thought I should try one last time.
so I connect it my pc and VIOLA it turns ON!?
now I have that same rebooting to recovery problem. I have no explanation for whatever has happened to phone in past 3 hours. I have been with phones for years. This is the weirdest thing to happen ever :angel:
Now someone, please help me?
Click to expand...
Click to collapse
Some user got that problem before. I am not sure about how they solve it but I guess that they flash their original KDZ back. If your phone can enter download mode, you should try LG Flash tool 2014 and flash your original kdz to restore incorrect system image.
About adb cannot find your phone, try to remove adb driver from device manager and reinstall LG usb driver.
artit said:
Some user got that problem before. I am not sure about how they solve it but I guess that they flash their original KDZ back. If your phone can enter download mode, you should try LG Flash tool 2014 and flash your original kdz to restore incorrect system image.
About adb cannot find your phone, try to remove adb driver from device manager and reinstall LG usb driver.
Click to expand...
Click to collapse
My phone is acting weird. Sometime it would start. Sometime the red light would blink. Sometimes the red light wouldn't blink at all. Then sometimes, it starts. And then it doesn't.
I have no clue what is going on with it.
But it went to download mode many times again, it would go to fastboot, bootloader, recovery etc. Then sometimes it will not respond to any buttons at all! I know its battery is down, but idk if it's charging or not?
I don't know how to know whether the phone is charging or not. I left it charging for 30 minute, and it didn't even buzz. :crying:
awais3344 said:
I know its battery is down, but idk if it's charging or not?
I don't know how to know whether the phone is charging or not. I left it charging for 30 minute, and it didn't even buzz. :crying:
Click to expand...
Click to collapse
One thing you can do (I've done it in the past a couple of times) is to crack your phone open, disconnect the battery, and charge it with an external charger. That would at least give you a full battery to start with...
Regarding the charging problems, I had that once. I was able to startup the phone by simply using a 2A charger instead of the LG's 1.2A.
When I had this issue it was charging while in recovery. Please look at this post and flash your kdz.
http://forum.xda-developers.com/showthread.php?p=54934779. This one helped me http://forum.xda-developers.com/showthread.php?p=53728658
Sent from my LG-E975 using XDA Free mobile app
kt-Froggy said:
One thing you can do (I've done it in the past a couple of times) is to crack your phone open, disconnect the battery, and charge it with an external charger. That would at least give you a full battery to start with...
Click to expand...
Click to collapse
thanks. but after charging it. I couldn't turn the screen off because it goes in recovery. I turned off the phone after good 30 minute charging. Then went to sleep. And in the morning I connected it to pc. by holding volume buttons for download mode. It didn't go to download mode. Only it's red light is blinking. and no display.
awais3344 said:
thanks. but after charging it. I couldn't turn the screen off because it goes in recovery. I turned off the phone after good 30 minute charging. Then went to sleep. And in the morning I connected it to pc. by holding volume buttons for download mode. It didn't go to download mode. Only it's red light is blinking. and no display.
Click to expand...
Click to collapse
Hey man. I have exaxt same prolem when update miui. Just do this when you got your recovey. Connect your phone to pc, let your pc update driver. Use adb sideload to flash stock zip kitkat e975 lgviet. Goodluck.
huy_gm said:
Hey man. I have exaxt same prolem when update miui. Just do this when you got your recovey. Connect your phone to pc, let your pc update driver. Use adb sideload to flash stock zip kitkat e975 lgviet. Goodluck.
Click to expand...
Click to collapse
Hi, regarding that. I was able to sideload exitrecovery.zip file. It goes to 100% then nothing happens. Nothing happened on phone screen as well.
And can you send me link to that stock zip kitkat? i have a miui.zip and few other roms that I have not tried. thanks
Edit: also what should I do about adb, am i doing correct?
Becuase in adb devices, my device is displayed with deviceID sideload
And i have only pasted adb folder, with a dll and a zip file, there is nothing else, do I need to install SDK?
I tried lg flash tool 2014 again, and it flashed, I swear yesterday I tried to flash it, and after clicking on it, it never showed me country and language selection menu, so it would sit there and do nothing. now I don't know how but it did it :laugh:
thank you so much you'all
So today I tried flashing android 5.0 on my T-mobile LG G3 D851. I put it into download mode, started the flash and waited. My LG flash tool then crashed and closed. My phone was %6 through the installation however and was just left frozen after it crashed. I tried every way possible to restart it and get out of the screen while keeping it plugged in, but I couldn't...so I took out the battery and put it back in. Now nothing is turning on, I can't put it in download mode and the charging LED doesn't light up, etc. It's completely bricked....what do I do? I've already tried taking out the battery and waiting and plugging in the cord and then battery. Please help! I can't afford the insurance or another phone...
EDIT: Also the battery does have charge...although I don't know how long it will last.
EDIT 2: I just realized this flash was for the 855 variant..not 851. Does this mean that I am just screwed?
It means that you got expensive brick.
You cant enter into download mode or recovery?
Probably only help is jtag. Find someone who can do that.
Sounds like someone has learned a very expensive lesson! Have you tried to factory reset it?
Yeah JTAG is all you got if no download mode
Sent from my LG-D855 using XDA Free mobile app
joshmccoyy said:
So today I tried flashing android 5.0 on my T-mobile LG G3 D851. I put it into download mode, started the flash and waited. My LG flash tool then crashed and closed. My phone was %6 through the installation however and was just left frozen after it crashed. I tried every way possible to restart it and get out of the screen while keeping it plugged in, but I couldn't...so I took out the battery and put it back in. Now nothing is turning on, I can't put it in download mode and the charging LED doesn't light up, etc. It's completely bricked....what do I do? I've already tried taking out the battery and waiting and plugging in the cord and then battery. Please help! I can't afford the insurance or another phone...
EDIT: Also the battery does have charge...although I don't know how long it will last.
EDIT 2: I just realized this flash was for the 855 variant..not 851. Does this mean that I am just screwed?
Click to expand...
Click to collapse
Did you manage to unbrick your G3?
Neurom707 said:
Yeah JTAG is all you got if no download mode
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
Not necessarily. This might work in his situation
http://forum.xda-developers.com/showthread.php?t=2582142
itsbighead said:
Not necessarily. This might work in his situation
http://forum.xda-developers.com/showthread.php?t=2582142
Click to expand...
Click to collapse
The linked solution works only if the device shows some signs of life - atleast a boot logo.
i have a D851 that a friend bricked. She tried upgrading to Lollipop and flashed the AT&T baseband on this TMobile version. The result is a hard bricked device which does not even seem to power on. Shows no signs of life, except when connected to a windows pc. It shows up as 'LG Androidnet USB modem' in the device manager. No boot logo, recovery, or download mode. Fortunately she has IMEI and twrp backups for this phone (boot, efs1, efs2, radio, rpm, tz). I did some research on JTag solutions. Unfortunately, none of the boxes support the D851, yet.
Any ideas on how to recover this device would be greatly appreciated.
majesticpark said:
The linked solution works only if the device shows some signs of life - atleast a boot logo.
i have a D851 that a friend bricked. She tried upgrading to Lollipop and flashed the AT&T baseband on this TMobile version. The result is a hard bricked device which does not even seem to power on. Shows no signs of life, except when connected to a windows pc. It shows up as 'LG Androidnet USB modem' in the device manager. No boot logo, recovery, or download mode. Fortunately she has IMEI and twrp backups for this phone (boot, efs1, efs2, radio, rpm, tz). I did some research on JTag solutions. Unfortunately, none of the boxes support the D851, yet.
Any ideas on how to recover this device would be greatly appreciated.
Click to expand...
Click to collapse
If OP at least get QHUSB_BULK when he plugs it in it's better that he tries it
Sent from my iPad using Tapatalk
itsbighead said:
If OP at least get QHUSB_BULK when he plugs it in it's better that he tries it
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Nope. Only LG Androidnet USB modem'
I am not new to rooting and unlocking Androids. My LG G3's UI would randomly freeze where I had to reboot the device to have it working again. Today I decided to flash the vanilla unicorn rom in recovery. I downloaded the rom and copied it over to the phone but the copy process kept getting stuck at some point, that I always had to cancel it.
So I decided to wipe cache and data to just reinstall the official d855 CM13 rom I had earlier on the device's storage, the wipe got stuck for at least 20 mins. I got impatient and removed the battery trying to reboot into recovery, but I was stunned and stuck on the LG Splash screen logo, I kept trying to reboot into recovery but couldn't get past the LG splash screen.
I then decided to try rebooting into fastboot, I was able to boot into fastboot the normal way without any issues but every attempt at getting TWRP just wasn't yielding anything useful. The closest I've gotten to seeing TWRP since then was with the fastboot command
Code:
fastboot boot recovery.img
which reboots showing the TWRP splash screen image without actually showing TWRP, but I've noticed I can access adb while the screen is stuck on the TWRP splash screen image.
I can't do any sideload of the zips on my computer because TWRP just stays there stuck on the splash screen so I can't enable sideloading. I have spent hours with this and it has taken too much of my time, attempts at
Code:
fastboot flash recovery recovery.img
just returns with an error in cmd with FAILED (remote: flash write failure).
I can't figure out what to do anymore, I'm left with a phone that can't boot into the rom and recovery, only the fastboot and download mode works. I just need the phone to let me boot into recovery so I can flash the files I need to and have my phone back to its earlier state.
I'll really appreciate everyone's support, thanks!
geek-x said:
I am not new to rooting and unlocking Androids. My LG G3's UI would randomly freeze where I had to reboot the device to have it working again. Today I decided to flash the vanilla unicorn rom in recovery. I downloaded the rom and copied it over to the phone but the copy process kept getting stuck at some point, that I always had to cancel it.
So I decided to wipe cache and data to just reinstall the official d855 CM13 rom I had earlier on the device's storage, the wipe got stuck for at least 20 mins. I got impatient and removed the battery trying to reboot into recovery, but I was stunned and stuck on the LG Splash screen logo, I kept trying to reboot into recovery but couldn't get past the LG splash screen.
I then decided to try rebooting into fastboot, I was able to boot into fastboot the normal way without any issues but every attempt at getting TWRP just wasn't yielding anything useful. The closest I've gotten to seeing TWRP since then was with the fastboot command which reboots showing the TWRP splash screen image without actually showing TWRP, but I've noticed I can access adb while the screen is stuck on the TWRP splash screen image.
I can't do any sideload of the zips on my computer because TWRP just stays there stuck on the splash screen so I can't enable sideloading. I have spent hours with this and it has taken too much of my time, attempts at just returns with an error in cmd with FAILED (remote: flash write failure).
I can't figure out what to do anymore, I'm left with a phone that can't boot into the rom and recovery, only the fastboot and download mode works. I just need the phone to let me boot into recovery so I can flash the files I need to and have my phone back to its earlier state.
I'll really appreciate everyone's support, thanks!
Click to expand...
Click to collapse
Does your computer recongnise your phone. If it does you (probably) can use LG up tool to flash kdz file
dusan17 said:
Does your computer recongnise your phone. If it does you (probably) can use LG up tool to flash kdz file
Click to expand...
Click to collapse
I have tried using the flash tool, but I can't get into Download mode to use the LG Flash tool to get back to stock. All I get is fastboot.
There was a tutorial about using two wires on the emmc, but I haven't been able to get the Qualcomm HD_USB 9008 to show up in Device manager.
Sent from my ONE A2005 using Tapatalk
geek-x said:
I have tried using the flash tool, but I can't get into Download mode to use the LG Flash tool to get back to stock. All I get is fastboot.
There was a tutorial about using two wires on the emmc, but I haven't been able to get the Qualcomm HD_USB 9008 to show up in Device manager.
Click to expand...
Click to collapse
I have the same case with my old LG L90. I spent a lot of time trying to get it back to life without success . I have read another post similar to this but the wire thing worked. I really don't know then.
dusan17 said:
I have the same case with my old LG L90. I spent a lot of time trying to get it back to life without success . I have read another post similar to this but the wire thing worked. I really don't know then.
Click to expand...
Click to collapse
What kind of wire did you use in getting it to work?
And how were you able to get windows to show the QLoader usb com port. ?
geek-x said:
What kind of wire did you use in getting it to work?
And how were you able to get windows to show the QLoader usb com port. ?
Click to expand...
Click to collapse
I didn't want to mess around with motherboard so i gave phone to my uncle because he is better than me in that stuff. But sadly we didn't bring it back to life.
dusan17 said:
I didn't want to mess around with motherboard so i gave phone to my uncle because he is better than me in that stuff. But sadly we didn't bring it back to life.
Click to expand...
Click to collapse
Damn.
geek-x said:
Damn.
Click to expand...
Click to collapse
I saw people unbrick devices that way we propably did somenthing wrong. For the wires i would use copper wires.
Do you have Qualcomm drivers installed in pc?
I have unbricked many mobile using this pin shortening trick.it's simple.just make sure you are shortening the right pins.
Jahanzaibawan said:
Do you have Qualcomm drivers installed in pc?
I have unbricked many mobile using this pin shortening trick.it's simple.just make sure you are shortening the right pins.
Click to expand...
Click to collapse
I can't get the Qualcomm drivers to show up in Device Manager, even after installing the Qualcomm drivers and I have enabled test mode and all that. My com ports don't show anything Qualcomm at all.
Jahanzaibawan said:
Do you have Qualcomm drivers installed in pc?
I have unbricked many mobile using this pin shortening trick.it's simple.just make sure you are shortening the right pins.
Click to expand...
Click to collapse
Does it also matter that I am using a USB 3.0 port? My laptop has no 2.0 ports.
This might be helpful http://forum.xda-developers.com/spr...fix-hard-brick-recovery-guide-t3132359/page59
dusan17 said:
This might be helpful http://forum.xda-developers.com/spr...fix-hard-brick-recovery-guide-t3132359/page59
Click to expand...
Click to collapse
Thanks for that post. I'll give it a try again tonight, I just need the Qualcomm 9008 drivers to come up.
Cause I noticed every time attach the wire to the board, windows recognizes the phone with an error "USB device not recognized" and in device manager a yellow warning mark next to one of the USB device icons.
Sent from my ONE A2005 using Tapatalk
geek-x said:
Thanks for that post. I'll give it a try again tonight, I just need the Qualcomm 9008 drivers to come up.
Cause I noticed every time attach the wire to the board, windows recognizes the phone with an error "USB device not recognized" and in device manager a yellow warning mark next to one of the USB device icons.
Click to expand...
Click to collapse
I that case right click chose update drivers and chose drivers manualy. Something like that should help you get device recognized
dusan17 said:
I that case right click chose update drivers and chose drivers manualy. Something like that should help you get device recognized
Click to expand...
Click to collapse
What directory will I choose to install the drivers from, the Qualcomm installation directory doesn't seem to contain the actual driver files.
geek-x said:
What directory will I choose to install the drivers from, the Qualcomm installation directory doesn't seem to contain the actual driver files.
Click to expand...
Click to collapse
Uf, i don't know it should be listed.
geek-x said:
Does it also matter that I am using a USB 3.0 port? My laptop has no 2.0 ports.
Click to expand...
Click to collapse
Yup.mostly 3.0 doesn't work.80% 3.0 cause the problem.
Jahanzaibawan said:
Yup.mostly 3.0 doesn't work.80% 3.0 cause the problem.
Click to expand...
Click to collapse
I'll try to get a USB 2.0 laptop to try this on. I just hope it works this time.
Hi everyone
I having this problem with my lg g3 d855 ... My phone was at 5% then i wanted to remove kingroot because i wanted to flash super su. After uninstalling kingroot (in the app) the app crashed ant after few seconds my phone turned off... i was thinking my phones battery just died, but i was wrong. My phone wont turn on now :/... Only response i get from it then i plug it in the charger without battery (it show no battery error)... then i put battery in, screen goes blank.
And also i installed twrp using app from store (Forgot the name, but for d855 model)
*LG G3 D855 Android 6.0 official* (if needed.)
i tried:
holding power button for 15sec without battery and then charging it... Didn't work :/.
Putting another battery (Galaxy s3... Charged to 30% at least. I don't have another lg battery ), same result.
New battery also doesn't do anything...
EDIT:
i tried method in http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359 but i can't find nor make .tot file :/ anyone can link mby?
and there's exclamation mark near Qualcomm HS-USB QDLoader 9008(COM13) in device manager. Maybe there's a problem with that?
Help guys
EDIT V2!!:
Thanks for nothing
i fixed my lgg3 with this tutorial http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
and flashed files in this order http://forum.xda-developers.com/spr...very-guide-t3132359/post65291398#post65291398
after that i put phone into download mode and flashed kdz file i had
at least someone responded to this post :/
It works now!..
The problem was autorec... i tried to install recovery using autorec for lollipop and that screwed everything
I have exactly the same problem.
Hamtero said:
I have exactly the same problem.
Click to expand...
Click to collapse
i fixed my lgg3 with this http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
and flashed files in this order http://forum.xda-developers.com/spr...very-guide-t3132359/post65291398#post65291398
(i installed slb1 without battery and then unpluged phone, put battery, hold volume up, putted usb back into phone and tried to put phone into download mode. IT WORKED!! )
And Thanks for replay
I was in the middle of unbrick my g3 from hard brick to soft brick. I flash firmware using lg up at 99% then the phone died as it tried to reboot. It won't boot at all. As you said when remove the battery and connect charger, i can see my motherboard working with exclamation mark. As soon as i put the battery, motherboard out and no sign of life. Is this sign of bad battery or what. I don't have spared battery
I recommend first, to users with similar problems, to try first my guide in following link and after the pins in motherboard-tot files
https://forum.xda-developers.com/lg-g3/general/root-twrp-marshmallow-d855-30b-t3286268/page116
Superuser_ said:
I recommend first, to users with similar problems, to try first my guide in following link and after the pins in motherboard-tot files
https://forum.xda-developers.com/lg-g3/general/root-twrp-marshmallow-d855-30b-t3286268/page116
Click to expand...
Click to collapse
I have D858HK hard bricked for 2 month and i use v10d to flash every partition. Then it won't boot into recovery. When i use v985 .tot, it successfully boot into recovery. Also on LG Smart Board diagnostic, my model not detected. Even if i manually select, nothing happen when it reboot. Right now, i have no idea whats wrong as i spent countless of hour on google and XDA.
anip_aniki said:
I have D858HK hard bricked for 2 month and i use v10d to flash every partition. Then it won't boot into recovery. When i use v985 .tot, it successfully boot into recovery. Also on LG Smart Board diagnostic, my model not detected. Even if i manually select, nothing happen when it reboot. Right now, i have no idea whats wrong as i spent countless of hour on google and XDA.
Click to expand...
Click to collapse
Have you try my guide?
Superuser_ said:
Have you try my guide?
Click to expand...
Click to collapse
I already follow your guide. The thing is, my device not detected on LG Smart Board Diagnostic. When i manually select my device, everything ok then it boot with blank screen with red and blue led. I can't even enter download mode. I use win 10 64bit with all driver installed and disable integrity checks and everything
guys, i really need help.
i recieved an F460 from a guy in a hurry, now it just shut on me. it's all korean so i don't understand... it's stuck in download mode and that's all it does when i plug it into the charger...
i have attached a screenie to show what its doing, please help me out. which OS should i download and flash on it...
thanks.
jafferkhan said:
guys, i really need help.
i recieved an F460 from a guy in a hurry, now it just shut on me. it's all korean so i don't understand... it's stuck in download mode and that's all it does when i plug it into the charger...
i have attached a screenie to show what its doing, please help me out. which OS should i download and flash on it...
thanks.
Click to expand...
Click to collapse
Install this file.(the first one)
http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/Korea+F400/F460/
-If you need help on how to flash this KDZ file just download lg up tool (from XDA).
Sotiris02 said:
Install this file.(the first one)
http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/Korea+F400/F460/
-If you need help on how to flash this KDZ file just download lg up tool (from XDA).
Click to expand...
Click to collapse
i did as you mentioned, LG flash tool asks to select the model, please, what am i doing wrong?
Ive installed the drivers as well.. it's detecting the phone but then this happens
jafferkhan said:
i did as you mentioned, LG flash tool asks to select the model, please, what am i doing wrong?
Ive installed the drivers as well.. it's detecting the phone but then this happens
Click to expand...
Click to collapse
When you say it asks,do you mean in an other window it shows "Select device model" and it has options down? Right?
I got it sorted out, I guess you have to install the drivers again. The thing is, after it installs and everything... It turns itself off after the cable is unplugged from the phone... I see the battery has swollen up inside and is in precarious condition... I tried doing the procedure again but the phone booted up... After a minute it shut down again and back to the download mode...
Is it the battery or what?
One more thing, after I unplug the phone it doesn't turn on other than if I connect it with the PC
jafferkhan said:
I got it sorted out, I guess you have to install the drivers again. The thing is, after it installs and everything... It turns itself off after the cable is unplugged from the phone... I see the battery has swollen up inside and is in precarious condition... I tried doing the procedure again but the phone booted up... After a minute it shut down again and back to the download mode...
Is it the battery or what?
One more thing, after I unplug the phone it doesn't turn on other than if I connect it with the PC
Click to expand...
Click to collapse
The battery should have a problem...
Try inserting an other battery.(if you have)
When it finishes with flashing don't unplug it from your PC!..
(The guy that had this phone had messed up with System partition files really bad...)
P.S:In lguptool did you select CSE flash?
The LG up I worked with didn't give me that option, it gave me the option to either update, refurbish and another one... I chose update so it allowed me to choose the kdz you linked here for me... It did it's thing then booted up and everything, when I unplugged it, it turned off and won't turn on.. Then I plugged it in again and it only showed the same download mode that I shared the image with you...
Try using one of these tools.
http://forum.xda-developers.com/showthread.php?t=2785089&page=492