I'm using Mi Band 1 and Mi Band Tools for notifications but I have some problems:
1. Alarm is not working - I have set it and band is not vibrating
2. Band keeps disconnecting - from time to time the band starts vibrating like when pairing with phone and I have to tap it a few times to connect. It is pretty annoying because I have to pair it few times a day.
When I had installed Mi Fit and paired the band there, the band would disconnect more often.
Does anyone have solution to that?
It it only me having such problems?
trawel said:
I'm using Mi Band 1 and Mi Band Tools for notifications but I have some problems:
1. Alarm is not working - I have set it and band is not vibrating
2. Band keeps disconnecting - from time to time the band starts vibrating like when pairing with phone and I have to tap it a few times to connect. It is pretty annoying because I have to pair it few times a day.
When I had installed Mi Fit and paired the band there, the band would disconnect more often.
Does anyone have solution to that?
It it only me having such problems?
Click to expand...
Click to collapse
1. The alarm doesn't work that way on miband or any other band for that matter. Instead set it on the band itself through the mi fit app.
Sent from my ONEPLUS A3000 using Tapatalk
millicent said:
1. The alarm doesn't work that way on miband or any other band for that matter. Instead set it on the band itself through the mi fit app.
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
I have set it in mi band tools and it's not working
trawel said:
I have set it in mi band tools and it's not working
Click to expand...
Click to collapse
I assume you tried the mi fit app as well?
Sent from my ONEPLUS A3000 using Tapatalk
When I was using Mi Fit, the band was disconnecting more often than now but maybe I'll try again
Related
Hey guys
I have a serious problem with my Xperia ZL that's driving me nuts... Everytime I try to use any app that needs mobile data access, my 3g works fine fot about 30 secs, then it disconnects (the 3g symbol disappears from the top bar) for about 5-10 seconds and it reconnects again until the cycle starts again.
This whole thing started since I tried to root my phone. The process went wrong and I had to flash the phone with Sony's recovery app, but my 3g never acted as it was before.
Do you know what could be going on? Or should I ask for a new phone?
I have a similar problem. Even in 2G modo. But my time off is bigger
Enviado desde mi C6502 mediante Tapatalk
melquisedec said:
I have a similar problem. Even in 2G modo. But my time off is bigger
Enviado desde mi C6502 mediante Tapatalk
Click to expand...
Click to collapse
Hey there, sorry for the delay.
Finally I was able to fix this. It was a company's problem, not mine. They adjusted some parameters here and there and magically, my 3G worked properly again. So maybe you should just call your company and talk to a tech guy, tell him that you did every test out there and that you're absolutely possitive that it's their problem =)
Best!
Do you know the config?
Enviado desde mi C6502
Just installed a new 11-c0255 into my car. When I attempt to set up bluetooth I can find my phone no problem but when they try attempt connect you can see the bluetooth icon appear for a split second on the car screen, and the bluetooth buttons become colored. Then it all goes back to grey. A few second later it happens again(both the bluetooth icon and the colored buttons) then back grey.
I have tried on with both mine and my girlfriends phone and it does the same with both.
Also the weather app is always blank, even if i manually add a city it remains blank.
Any ideas?
Interesting enough my friends Iphone and his girlfriends stock HTC both connect fine. Could be a bluetooth issue with the CM13 me and my g/f are running.
Confirmed an issue with the CM13 rom we are using.
Still dont know why I have the blank weather app.
Finally! I thought i was the only one. CM13 in my Oneplus One does the same thing. I go back to 12.1 (5.1.1) and all is fine.
EDIT: Mine is a Pumpkin C0250
I have a OnePlus One and have been having TERRIBLE problems with Bluetooth not always connecting. I haven't suspected the phone because my Bluetooth OBD dongle also can't connect when it happens... but it may be possible something the phone is doing is crashing the bluetooth stack on the radio. Guess I'll switch back to the old Nexus 5 for a test run... *sighhhh*... Changing SIMs is a pain because I have a pretty hefty case on the OnePlus One.
EDIT: Oh, I see you were on CM13. I'm still on CM12.1 YOG4PAS3JL. Still, worth a shot.
singlecell83 said:
Also the weather app is always blank, even if i manually add a city it remains blank.
Any ideas?
Click to expand...
Click to collapse
Start here: http://forum.xda-developers.com/android-auto/mtcb-android-head-units-qa/weather-widget-t3305168
Hello. I have this problem too. My phone is a oneplus one. When i was on cm12.1 I had no problems at all. Now I'm on cm13 and i have exactly the same issue as you... Connects and disconnects two times, just for a moment and then keeps disconnected...
Bluetooth media works fine...
Anybody know any fix?
Thnx!
Enviado desde mi A0001 mediante Tapatalk
---------- Post added at 09:14 PM ---------- Previous post was at 09:13 PM ----------
itzal77 said:
Hello. I have this problem too. My phone is a oneplus one. When i was on cm12.1 I had no problems at all. Now I'm on cm13 and i have exactly the same issue as you... Connects and disconnects two times, just for a moment and then keeps disconnected...
Bluetooth media works fine...
Anybody know any fix?
Thnx!
Enviado desde mi A0001 mediante Tapatalk
Click to expand...
Click to collapse
Enviado desde mi A0001 mediante Tapatalk
singlecell83 said:
Also the weather app is always blank, even if i manually add a city it remains blank.
Any ideas?
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/showpost.php?p=65228919&postcount=1353
With this version my weather app start working.
Hello there. I have a problem with my mi band. A long time ago I set up an alarm, I've used it for a few days, then I deleted it, but the band is still vibrating at that time and I still couldn't have stopped nor understand why it happens. There is no alarm set up and there are no notifications when it vibrates. Did anyone else have my same issue ? Is there anyway to solve it or I can throw the band to garbage bin ?
Have you tried setting up all 3 alarms and then removing it again? Do you use Mi Band Tools?
No, I have MiFit. By the way, I've already solved. Anyway thanks for your answer
What was the solution?
Most of smart lock features are missing, the only present is Bluetooth smart lock and it doesn't work, can't find any of my connected devices. It's a know problem, can I do anything to solve this issue?
Sent from my MI MAX using Tapatalk
Mi Band 2 should work.
Even Mi Band 1 is working.
Install RR 5.8
I have bought recently a mi band 4 and when I was setting it up I could not measure heart rate and I do not know why.
Does anyone faced this problem and have fixed it?
I already have reinstalled MI FIT from my Redmi Note 6 PRO, reset factory the MB4 and paired with Amazfit app and I got the same result.
I am looking for the ROM to reinstall the firmware of MB4 as well but unfortunately, I could not find any tutorial or link to reinstall the firmware on it. If someone has the ROM and the software to reinstall the firmware I will be glad.
Everton Kopec :good:
I have the same problem, I opened a support ticket for customer support and I am awaiting a response. I noticed that the sensor does not switch on, the LED remains off.
EBKopec said:
I have bought recently a mi band 4 and when I was setting it up I could not measure heart rate and I do not know why.
Does anyone faced this problem and have fixed it?
I already have reinstalled MI FIT from my Redmi Note 6 PRO, reset factory the MB4 and paired with Amazfit app and I got the same result.
I am looking for the ROM to reinstall the firmware of MB4 as well but unfortunately, I could not find any tutorial or link to reinstall the firmware on it. If someone has the ROM and the software to reinstall the firmware I will be glad.
Everton Kopec :good:
Click to expand...
Click to collapse
You might have luck with this manual installation of custom ROM. However I do not know how to return to 100% stock, should you want to apply for your warranty (no idea if the service center would check FW version). https://geekdoing.com/threads/international-firmware-for-mi-band-4.970/
_mysiak_ said:
You might have luck with this manual installation of custom ROM. However I do not know how to return to 100% stock, should you want to apply for your warranty (no idea if the service center would check FW version)
Click to expand...
Click to collapse
Thank you dude but it doesn't work yet. Sad. I still looking for a solution.
I have a strange heart rate monitoring issue. I can manually check the rate at any time and it works without problem. I have the band set to check every 10 minutes and during sleep too. Once in every 5,6 days, heart rate is not recorded for duration of about 1 hour.
I did factory reset but didn't seem to help. I thought the sensor wasn't clean, so I was periodically but doesn't seem to fix. It's not too loose on my wrist, I see the mark of sensor on my wrist when I take off to ensure it's not loosely fitted. Don't know what's causing this strange behavior.
EBKopec said:
I have bought recently a mi band 4 and when I was setting it up I could not measure heart rate and I do not know why.
Does anyone faced this problem and have fixed it?
I already have reinstalled MI FIT from my Redmi Note 6 PRO, reset factory the MB4 and paired with Amazfit app and I got the same result.
I am looking for the ROM to reinstall the firmware of MB4 as well but unfortunately, I could not find any tutorial or link to reinstall the firmware on it. If someone has the ROM and the software to reinstall the firmware I will be glad.
Everton Kopec :good:
Click to expand...
Click to collapse
Any luck with the issue? i am too facing this issue, right after after unpacking the box and first pairing.
karthikeyanksriet said:
Any luck with the issue? i am too facing this issue, right after after unpacking the box and first pairing.
Click to expand...
Click to collapse
Is your green LED blinking during HR measurement? If not, ask for a warranty repair/replacement.
_mysiak_ said:
Is your green LED blinking during HR measurement? If not, ask for a warranty repair/replacement.
Click to expand...
Click to collapse
yes green light is blinking but still getting "Could not measure" Error
karthikeyanksriet said:
yes green light is blinking but still getting "Could not measure" Error
Click to expand...
Click to collapse
Have you tried fastening/loosening the band on your hand or measuring on the underside of the wrist?
Same problem here, I can do it manually by putting the sensor at 1cm from my wrist (as stated I don't remember where)
but it dosen't works automatically to monitor while sleeping for example.
kennyk09 said:
I have a strange heart rate monitoring issue. I can manually check the rate at any time and it works without problem. I have the band set to check every 10 minutes and during sleep too. Once in every 5,6 days, heart rate is not recorded for duration of about 1 hour.
I did factory reset but didn't seem to help. I thought the sensor wasn't clean, so I was periodically but doesn't seem to fix. It's not too loose on my wrist, I see the mark of sensor on my wrist when I take off to ensure it's not loosely fitted. Don't know what's causing this strange behavior.
Click to expand...
Click to collapse
Hi, some days ago just received a brand new Mi band 5 and today i realised that presents the same behavior that you described so i wonder to ask if you found some solution to this problem.
Actually this is the only information about this problem with the mi band HR measurement.
Jkmoran said:
Hi, some days ago just received a brand new Mi band 5 and today i realised that presents the same behavior that you described so i wonder to ask if you found some solution to this problem.
Actually this is the only information about this problem with the mi band HR measurement.
Click to expand...
Click to collapse
Actually this problem disappeared one day without trying anything, strange.
Hope yours get fixed too.
I have a problem, my mi band is not charging and the cable seems to look ok