Related
Hello,
I tried to flash my phone from global 8.0.3.0 stable to 8.2.4.0MAGCNDL China Stable. Miflash said flashing was successfull, but then I started my phone and was on a bootloop.
I cannot access edl mode via deep flash cable anymore, it´s just loading. My phone isn´t unlocked that´s why i can´t flash over fastboot. I already tried to the recover mode and downloaded a chinese version of Mi Pc Suite. It detects my device but when I try to recover it switches for like 3 secs to the right screen but then immediately switchs back to the first screen (connect device).
One thing i´ve noticed is there is an option to choose a xiaomi ota file, what is that, because I can´t find anything.
Is there any hope for my phone?
Not good, you shouldent even try to flash china stable(you can but why). so, i think you should enter EDL with testpoints, or you can try do hard reset, maybe this will work.
use this method and then flash your mi5s with stable global.
http://en.miui.com/thread-310325-1-1.html
Download Mi PC suite china version then enter recovery mode and connect the phone to pc,let it make the update and your done.
mezutelni said:
Not good, you shouldent even try to flash china stable(you can but why). so, i think you should enter EDL with testpoints, or you can try do hard reset, maybe this will work.
Click to expand...
Click to collapse
Thanks for your reply, how can I hard reset my device? And I watched a yt video for tespoints , is it the same procedure as with the mi5 ?
hzare2611 said:
use this method and then flash your mi5s with stable global.
Click to expand...
Click to collapse
I got a Edl cable, but I can´t get into edl.
XMoDuLeSx said:
Download Mi PC suite china version then enter recovery mode and connect the phone to pc,let it make the update and your done.
Click to expand...
Click to collapse
Not working, it just stops immediatly the process, if I press recover
Then u need to connect the phone via USB 2 not 3 and install the correct driver's. The phone must be detected Android adb interface
XMoDuLeSx said:
Then u need to connect the phone via USB 2 not 3 and install the correct driver's. The phone must be detected Android adb interface
Click to expand...
Click to collapse
I´ve installed all drivers and it´s connected to a usb 2 port. Phone is in Device Manager under "Kedacom USB Device/Android ADB Interface"
if you cannat connect the phone as edl,you should give it to mobile repaire center and they fix it with boot boxes for you.
Thanks for all your help guys, I finally recovered my phone and I´m on Lineage OS now.
Hello
I've redmi note 5 (whyred) with global stable Rom 9.5.13.0
And I tried to unlock it today..
The problem is that miui flash unlock program doesn't recognize the device.
I thought that the Adb driver is not installed ( I've unlocked mi several Xiaomi phones on same laptop before)
So I double checked the driver installation and figured out that then I connect the device on bootloader mode the device manager detects it with no problem (as android bootloader device)
As soon as I open the mi flash unlock tool the device disconnects and disappear from device manager.
Did anyone faced this before?
I have the exact same issue. Spent a lot of time figuring out what to do, even my device was not recognized by the latest Mi unlock 3.3 (rn5 pro india 9.5.13 global stable) because the fastboot kept vanishing.
However, if you use an older version of Mi Unlock (I tried 2.2 and varying versions) it actually did recognize the device but the unlocking only goes to 99% and asks you to wait 360 hours.
I've tried to bypass it using different methods but to no avail. I think Xiaomi has patched everything.
Guess we'll have to wait.
hassan_eldhraawy said:
Hello
I've redmi note 5 (whyred) with global stable Rom 9.5.13.0
And I tried to unlock it today..
The problem is that miui flash unlock program doesn't recognize the device.
I thought that the Adb driver is not installed ( I've unlocked mi several Xiaomi phones on same laptop before)
So I double checked the driver installation and figured out that then I connect the device on bootloader mode the device manager detects it with no problem (as android bootloader device)
As soon as I open the mi flash unlock tool the device disconnects and disappear from device manager.
Did anyone faced this before?
Click to expand...
Click to collapse
Bro i have face it says press any key to shutdown
@IM_zimmy said:
Bro i have face it says press any key to shutdown
Click to expand...
Click to collapse
Yes, the phone displays this sentence with small font when it gets disconnected, how did you fix that
This is probably a driver problem. Disable Driver Signature Enforcement in Windows. Open command prompt as admin and type:
bcdedit.exe – set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit.exe – set TESTSIGNING ON
And run mi unlock tool again
hassan_eldhraawy said:
Hello
I've redmi note 5 (whyred) with global stable Rom 9.5.13.0
And I tried to unlock it today..
The problem is that miui flash unlock program doesn't recognize the device.
I thought that the Adb driver is not installed ( I've unlocked mi several Xiaomi phones on same laptop before)
So I double checked the driver installation and figured out that then I connect the device on bootloader mode the device manager detects it with no problem (as android bootloader device)
As soon as I open the mi flash unlock tool the device disconnects and disappear from device manager.
Did anyone faced this before?
Click to expand...
Click to collapse
Just put your folder in "c" e.g (c:/folder) drive & try again I think it will work please do let me know.
devcon69 said:
This is probably a driver problem. Disable Driver Signature Enforcement in Windows. Open command prompt as admin and type:
bcdedit.exe – set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit.exe – set TESTSIGNING ON
And run mi unlock tool again
Click to expand...
Click to collapse
I disabled this long ago and I've unlocked mi max 1, redmi note 4, MI Max 2 with no problems
Rinku221 said:
Just put your folder in "c" e.g (c:/folder) drive & try again I think it will work please do let me know.
Click to expand...
Click to collapse
I tried but it didn't work
hassan_eldhraawy said:
I tried but it didn't work
Click to expand...
Click to collapse
Strange I have been facing the same problem but solved by this method.
hassan_eldhraawy said:
Yes, the phone displays this sentence with small font when it gets disconnected, how did you fix that
Click to expand...
Click to collapse
Restart the device and laptop
@IM_zimmy said:
Restart the device and laptop
Click to expand...
Click to collapse
Restarted both several times and tried another laptop, the same :crying:
i have this same problem too . till now still unable to find out the problem .. it's irritating
is the problem solved or not? I've this RN5 for a months and still cant unlock my bootloader
Has anybody unlocked bootloader??
I have tried all above solutions.
What's the solution??
user2022020 said:
Has anybody unlocked bootloader??
I have tried all above solutions.
What's the solution??
Click to expand...
Click to collapse
i dont know same problem
Are you all using win10??
Thats your problem!!
Use win7 and old miui unlock tool, dont forget to install drivers.
Good luck and stay safe.
Happy new year to all
drnightshadow said:
Are you all using win10??
Thats your problem!!
Use win7 and old miui unlock tool, dont forget to install drivers.
Good luck and stay safe.
Happy new year to all
Click to expand...
Click to collapse
thanks but i solved it with this method https://forum.xda-developers.com/t/...nlock-bootloader-or-run-fastboot-cmd.4180389/
Firstly ur phone must be on Stock miui Rom otherwise ur phone will not detecte with pc then use Xaomi flash tool v2 not miui flash tool...first one is different from miui flash tool...with this tool u can boot ur phone in fastboot mode and u can install custom revery and many features.
Hi, can someone help? I was about to flash the official whyred Linedage OS for my Redmi Note 5. I did that with note 3 and note 4 before, so kind of knew what I was doing.. But was not aware of the antirollback thing.. So after i decided to flash the new miui 10 firs for the firmware..(wasn't the best idea I know) and you know the rest.. something went wrong and now I am stuck with dead phone.. no recovery, no fastboot, nothing.. I had unlocked bootloader officially a few weeks ago, got the device connected with the mi account (not sure about if the account is authorized or not).
I tried the test point method - dissembling the device from miui dot com
I have the right driver listed in device manager (Qualcom HS-USB QDLoader 9008)
I tried several roms listed here or miui dot com
I tired several versions of MiFlash
Every time I only get the message about not reading the com port (tried all USB ports on two PCs, reinstalled drivers .. everything) .. It starts flashing "read hello packet", then after 5 seconds stops with the mesage "can not read from port comXY"
In edb its just waiting for the device on any command (or not devices found)
Anyone can help please? I spent the whole day searching for solution and found nothing, or nothing helps
thx in advance
I am in your same situation. did you solved it?
thank you
rfiore said:
I am in your same situation. did you solved it?
thank you
Click to expand...
Click to collapse
Yeah, posted my ID on the forum, got authorized, then used the "portable" miflash and it worked.. But on the other PC still got errors in miflash.. didn't even check for the authorization, so I suppose its PC related.. perhaps something with the drivers..
FKuzel said:
Hi, can someone help? I was about to flash the official whyred Linedage OS for my Redmi Note 5. I did that with note 3 and note 4 before, so kind of knew what I was doing.. But was not aware of the antirollback thing.. So after i decided to flash the new miui 10 firs for the firmware..(wasn't the best idea I know) and you know the rest.. something went wrong and now I am stuck with dead phone.. no recovery, no fastboot, nothing.. I had unlocked bootloader officially a few weeks ago, got the device connected with the mi account (not sure about if the account is authorized or not).
I tried the test point method - dissembling the device from miui dot com
I have the right driver listed in device manager (Qualcom HS-USB QDLoader 9008)
I tried several roms listed here or miui dot com
I tired several versions of MiFlash
Every time I only get the message about not reading the com port (tried all USB ports on two PCs, reinstalled drivers .. everything) .. It starts flashing "read hello packet", then after 5 seconds stops with the mesage "can not read from port comXY"
In edb its just waiting for the device on any command (or not devices found)
Anyone can help please? I spent the whole day searching for solution and found nothing, or nothing helps
thx in advance
Click to expand...
Click to collapse
I faced the similar situation. I pasted the ID in the russian and english forum. I got no message for weeks, I thought of flashing again, Voila. Device flashed and turned ON. Your device is hard bricked as mine, it needs authentication from Mi to flash via EDL mode. All you need to do is download the MI flash tool portable, and paste your Mi ID in forums.
Unfortunately both the forum's date to paste the ID has been expired. But still you try to get help from someone else from the forum or the moderators.
I'll explain different errors I faced and the solution for it.
"not reading the com port" --- You get this error when you flash Global version of the ROM. Use the Developer version of it.
"It starts flashing "read hello packet"" --- You get this error because edl is turned off in your phone. To turn it back ON, just remove the USB cable from your phone and then press the power button for 10-15 seconds. Then connect your phone back again and try to flash.
"edb its just waiting for the device on any command" --- Actually this is not an error. Your phone is hard bricked. While in hard bricked mode adb won't work. ADB works only in fastboot mode.
Simple.. Disconnect and Reconnect with your PC Via Testpoint.. Thanks.
thank you very much
Prabudeva005 said:
I faced the similar situation. I pasted the ID in the russian and english forum. I got no message for weeks, I thought of flashing again, Voila. Device flashed and turned ON. Your device is hard bricked as mine, it needs authentication from Mi to flash via EDL mode. All you need to do is download the MI flash tool portable, and paste your Mi ID in forums.
Unfortunately both the forum's date to paste the ID has been expired. But still you try to get help from someone else from the forum or the moderators.
I'll explain different errors I faced and the solution for it.
"not reading the com port" --- You get this error when you flash Global version of the ROM. Use the Developer version of it.
"It starts flashing "read hello packet"" --- You get this error because edl is turned off in your phone. To turn it back ON, just remove the USB cable from your phone and then press the power button for 10-15 seconds. Then connect your phone back again and try to flash.
"edb its just waiting for the device on any command" --- Actually this is not an error. Your phone is hard bricked. While in hard bricked mode adb won't work. ADB works only in fastboot mode.
Click to expand...
Click to collapse
I was lose hope because 12 hour my mido error cant read hello packet, and now fix it with your tips.. thanks a lot man
Prabudeva005 said:
I faced the similar situation. I pasted the ID in the russian and english forum. I got no message for weeks, I thought of flashing again, Voila. Device flashed and turned ON. Your device is hard bricked as mine, it needs authentication from Mi to flash via EDL mode. All you need to do is download the MI flash tool portable, and paste your Mi ID in forums.
Unfortunately both the forum's date to paste the ID has been expired. But still you try to get help from someone else from the forum or the moderators.
I'll explain different errors I faced and the solution for it.
"not reading the com port" --- You get this error when you flash Global version of the ROM. Use the Developer version of it.
"It starts flashing "read hello packet"" --- You get this error because edl is turned off in your phone. To turn it back ON, just remove the USB cable from your phone and then press the power button for 10-15 seconds. Then connect your phone back again and try to flash.
"edb its just waiting for the device on any command" --- Actually this is not an error. Your phone is hard bricked. While in hard bricked mode adb won't work. ADB works only in fastboot mode.
Click to expand...
Click to collapse
Thank you. I was in the "read hello packet" part and i was able to flash the Chinese rm
Thanks
Can u please give me your mi authorized I'd it will help for me
Am also stuck on edl mode redmi note 5 pro so please give me your mi I'd
Raviganthy said:
Am also stuck on edl mode redmi note 5 pro so please give me your mi I'd
Click to expand...
Click to collapse
https://forum.xda-developers.com/redmi-note-5-pro/how-to/fix-arb-bricked-device-qfil-t3841780
Help!
Help! i am also stuck on this problem on my Redmi 3. Can someone please help me?:crying:
---------- Post added at 06:18 AM ---------- Previous post was at 06:15 AM ----------
FKuzel said:
Yeah, posted my ID on the forum, got authorized, then used the "portable" miflash and it worked.. But on the other PC still got errors in miflash.. didn't even check for the authorization, so I suppose its PC related.. perhaps something with the drivers..
Click to expand...
Click to collapse
What forum?
can not read from port com xy
guilherme06 said:
Thank you. I was in the "read hello packet" part and i was able to flash the Chinese rm
Thanks
Click to expand...
Click to collapse
Hello, I've tried even developer rom, it displays the same error can not read from port com xy.
Even after doing test-point all over again.
By mistake I flashed wayne rom once, and phone boots but in a messed up fastboot mode.
talhosvi said:
Hello, I've tried even developer rom, it displays the same error can not read from port com xy.
Even after doing test-point all over again.
By mistake I flashed wayne rom once, and phone boots but in a messed up fastboot mode.
Click to expand...
Click to collapse
I have the same problem with my jasmine(which used to be wayne) when I tried to change it back into wayne again... do you have any solution already ?
kunoir said:
I have the same problem with my jasmine(which used to be wayne) when I tried to change it back into wayne again... do you have any solution already ?
Click to expand...
Click to collapse
have you find any solution?
jayspiker said:
have you find any solution?
Click to expand...
Click to collapse
i had the same problem but fixed with edl cable
Prabudeva005 said:
I faced the similar situation. I pasted the ID in the russian and english forum. I got no message for weeks, I thought of flashing again, Voila. Device flashed and turned ON. Your device is hard bricked as mine, it needs authentication from Mi to flash via EDL mode. All you need to do is download the MI flash tool portable, and paste your Mi ID in forums.
Unfortunately both the forum's date to paste the ID has been expired. But still you try to get help from someone else from the forum or the moderators.
I'll explain different errors I faced and the solution for it.
"not reading the com port" --- You get this error when you flash Global version of the ROM. Use the Developer version of it.
"It starts flashing "read hello packet"" --- You get this error because edl is turned off in your phone. To turn it back ON, just remove the USB cable from your phone and then press the power button for 10-15 seconds. Then connect your phone back again and try to flash.
"edb its just waiting for the device on any command" --- Actually this is not an error. Your phone is hard bricked. While in hard bricked mode adb won't work. ADB works only in fastboot mode.
Click to expand...
Click to collapse
where can i find this chinese rom for MI A3
talhosvi said:
can not read from port com xy
Hello, I've tried even developer rom, it displays the same error can not read from port com xy.
Even after doing test-point all over again.
By mistake I flashed wayne rom once, and phone boots but in a messed up fastboot mode.
Click to expand...
Click to collapse
same problem with me . Have you solved it ?? let me know please
Hi Guys,
I have the same problem trying to flash MIUI 11 in mi A3 with MIUI 12. Anyone knows a solution for this?
you see, I made a bad installation of a rom and my phone no longer turns on (I can not enter bootloader or recovery mode) try to restore it by my flash. I recognize my flash device as COM but at the time of starting the flash it asks for an MI account (I log in with the account which is synchronized to the phone) but it always sends me error. I have been told that there is a solution through something called test point, but as far as I understand this is for the computer to recognize the phone. which I already do. Any advice or tutorial?
(sorry my english, I speak spanish.)
Modularkarma said:
you see, I made a bad installation of a rom and my phone no longer turns on (I can not enter bootloader or recovery mode) try to restore it by my flash. I recognize my flash device as COM but at the time of starting the flash it asks for an MI account (I log in with the account which is synchronized to the phone) but it always sends me error. I have been told that there is a solution through something called test point, but as far as I understand this is for the computer to recognize the phone. which I already do. Any advice or tutorial?
(sorry my english, I speak spanish.)
Click to expand...
Click to collapse
Error doesnt say much.. atleast write what does the error say... And yes, there is also qfil flashing method, which can revive basically dead device. But you have to open up device, take off back panel, and touch 2 metal thingies with a tweezers or something similar to enter qfil. I made a huge mistake few months ago, accidentally flashed firmware of another device onto RN5 and it just went through it, then it turned off, and was completely dead. No signs of life whatsoever, so i revived it using qfil method and flash stock firmware again. There are guides in this forum.
No
Incogn said:
Error doesnt say much.. atleast write what does the error say... And yes, there is also qfil flashing method, which can revive basically dead device. But you have to open up device, take off back panel, and touch 2 metal thingies with a tweezers or something similar to enter qfil. I made a huge mistake few months ago, accidentally flashed firmware of another device onto RN5 and it just went through it, then it turned off, and was completely dead. No signs of life whatsoever, so i revived it using qfil method and flash stock firmware again. There are guides in this forum.
Click to expand...
Click to collapse
what type of firmware did you install, because I try it with the official firmware of the page and it does not leave me, it asks me for a miui account but when I put it it tells me to authenticate failed edl
Modularkarma said:
No
what type of firmware did you install, because I try it with the official firmware of the page and it does not leave me, it asks me for a miui account but when I put it it tells me to authenticate failed edl
Click to expand...
Click to collapse
Yes, i also had authentication errors, thats why i had to open device, short 2 contacts, then phone entered edl mode, and i succesfully fixed it using qfil method of which there is a guide in this forum
Incogn said:
Yes, i also had authentication errors, thats why i had to open device, short 2 contacts, then phone entered edl mode, and i succesfully fixed it using qfil method of which there is a guide in this forum
Click to expand...
Click to collapse
I did all the test point process, I tried to flash several fastboots but the phone does not turn on, it flashes normally but when I try to turn it on, it does not turn on. I have the redmi note 5, I bought it in Colombia.
Incogn said:
Yes, i also had authentication errors, thats why i had to open device, short 2 contacts, then phone entered edl mode, and i succesfully fixed it using qfil method of which there is a guide in this forum
Click to expand...
Click to collapse
I did all the test point process, I tried to flash roms fastboots but the phone does not turn on, it flashes normally but when I try to turn it on, it does not turn on. I have the redmi note 5, I bought it in Colombia.
Hello,
My phone got hard bricked yesterday after the MIUI 11 update. It was running fine before on lastest MIUI10 global ROM with persistent TWRP, root and magisk. Bootloader is unlocked.
The phone dont turn on anymore and just show a white notification led when plugged to a PC. No recovery or fastboot access
If i press volume up when i plug it to my pc, it show up as "Mediatek USB Port" and disappear after 5 seconds.
I tried to open the phone/ removing battery, shorting EDL test points, but nothing happens.
My only solution appears to be using Sp_flash_tool but seems like i need an authorized Mi account flash the stock ROM.
Do someone know where i can get acces to one of those account ?
Thanks for your replies guys !
Redmi Note 8 Pro Hard Bricked
I'm in the same situation.
please help me
Hello,
The same thing happened to me when I installed the Orange FOX recovery, it didn't go into Fastboot mode, so I had to press the 3 buttons and wait for it to turn off completely, open the ADB control console and then connect it to the PC via USB by pressing the volume + button.
The latter I did on several occasions (Turn it off completely and connect by USB). Until I recognized it, when I recognized them, I had to flash the SYSTEM, CUST, RECOVERY. One by one, in total it took almost 5 minutes.
After that the phone started normal, obviously without root, nor custom recovery.
I'm also in the same situation as all of you, the PC doesn't recognize me and I can't go into fastboot
Hey,
I tried everything I could (battery connected/unplugged), my phone seems to have a corrupted preloader and only start the boot rom. That's why it shows up as "Mediatek USB PORT", if the preloader was'nt corrupted, it should be named "MediaTek PreLoader USB VCOM port" or something similar.
The only way to recover it imo is to flash a healthy preloader using SPFlashTool low level flash mode and next flash a full rom when "MediaTek PreLoader USB VCOM port" appears in the device manager.
Unfortunately, xiaomi ask for a certified account for low level flashing. I found one but the guy ask for 40$ for just logging it into my pc with teamviewer.
I buyed a Samsung Note10+ in replacement and i'll just wait someone find a solution to sell my 10-day-used redmi if I can revive it one day.
I got hundreds $ of Xiaomi home automation products in my home, but that was my first phone from this brand. I think it will also be the last.
I'm sad to see that their security policy on the phones is so frustrating to the people who just want to have a full acces on their devices.
Authorise can be done with professional tools
Tools like umt, hydra tool, miracle xiaomi tool, does the authorization. And i think mtk cpu Auth will only be available in miracle xiaomi tool, be aware every Auth cost credit of 4 to 10 u will have but credit separate from the tool.. Hope this will help
MOD EDIT: quote removed help our devlopers lmao to get atleast one rom ??
They only need to unbrick sometimes.
girishjangir7 said:
MOD EDIT: name removed help our devlopers lmao to get atleast one rom ??
They only need to unbrick sometimes.
Click to expand...
Click to collapse
Where is this post??
Some hours ago an user MOD EDIT: name removed offers help to unbrick devices but all threads was deleted??? Why?
djzero86 said:
Where is this post??
Some hours ago an user MOD EDIT: name removed offers help to unbrick devices but all threads was deleted??? Why?
Click to expand...
Click to collapse
It's against forum rules to post paid services
Y0annC said:
Hello,
My phone got hard bricked yesterday after the MIUI 11 update. It was running fine before on lastest MIUI10 global ROM with persistent TWRP, root and magisk. Bootloader is unlocked.
The phone dont turn on anymore and just show a white notification led when plugged to a PC. No recovery or fastboot access
If i press volume up when i plug it to my pc, it show up as "Mediatek USB Port" and disappear after 5 seconds.
I tried to open the phone/ removing battery, shorting EDL test points, but nothing happens.
My only solution appears to be using Sp_flash_tool but seems like i need an authorized Mi account flash the stock ROM.
Do someone know where i can get acces to one of those account ?
Thanks for your replies guys !
Click to expand...
Click to collapse
I Faced The Same Problem Of Bricked Phone Of Redmi Note 8 Pro, I Was Unable To Enter Fastboot Mode, Recovery Mode & Even Can't Enter Into The System Because I Flash Wrong Boot.img File, Thereafter I Tried To Use SP Flash Tool But Failed Due To Xiaomi Authorised Account Issue. Then I Emailed Xiaomi For Getting My Account Authorised And They Emailed Back And Told Me That They Can't Authorise My Account..
Then I Decided To Visit Mi Service Centre As My Phone Was In Warranty, The Funniest Fact Is The Technicians Existed There Were Failed To Detect The Problem. I Told Them That My Phone Was Automatically Got Dead After Installing An Update Just For Making Them Unaware From The Real Fact.
I Told Them That There Is No Hardware Issue Only Need To Flash Original Firmware But They Are Freak And Didn't Listen To Me And Opened Up Every Part Of The Phone, Now They Told Me That The Phone Will Need 7 Days Of Repairing Take The Phone After 7 Days.
I Tried To Teach Them The Way By Which The Phone Could Be Repaired But They Only Listen To Me And Did Nothing, They Were Behaving Like A Beginner In Repairing Phone,
They Didn't Know That The Phone Can Also Be Reapired During Switched Off.
Now I Have To Wait For 7 Days, So Guys Flash Anything Carefully Otherwise You Will Face The Same Situation.
Thanks
Well I guess I won't unlock my device... To be honest I have no reason to do so. The phone is running great and I have adguard and removed all the apps I don't like using adb.
petenoni said:
Well I guess I won't unlock my device... To be honest I have no reason to do so. The phone is running great and I have adguard and removed all the apps I don't like using adb.
Click to expand...
Click to collapse
I Also Had Adguard But I Was Still Not Satisfied
I Wanted My Phone To Be Rooted And Use The Custom ROMs If Build In Future.
Hemant Singh Rajput said:
I Faced The Same Problem Of Bricked Phone Of Redmi Note 8 Pro, I Was Unable To Enter Fastboot Mode, Recovery Mode & Even Can't Enter Into The System Because I Flash Wrong Boot.img File, Thereafter I Tried To Use SP Flash Tool But Failed Due To Xiaomi Authorised Account Issue. Then I Emailed Xiaomi For Getting My Account Authorised And They Emailed Back And Told Me That They Can't Authorise My Account..
Then I Decided To Visit Mi Service Centre As My Phone Was In Warranty, The Funniest Fact Is The Technicians Existed There Were Failed To Detect The Problem. I Told Them That My Phone Was Automatically Got Dead After Installing An Update Just For Making Them Unaware From The Real Fact.
I Told Them That There Is No Hardware Issue Only Need To Flash Original Firmware But They Are Freak And Didn't Listen To Me And Opened Up Every Part Of The Phone, Now They Told Me That The Phone Will Need 7 Days Of Repairing Take The Phone After 7 Days.
I Tried To Teach Them The Way By Which The Phone Could Be Repaired But They Only Listen To Me And Did Nothing, They Were Behaving Like A Beginner In Repairing Phone,
They Didn't Know That The Phone Can Also Be Reapired During Switched Off.
Now I Have To Wait For 7 Days, So Guys Flash Anything Carefully Otherwise You Will Face The Same Situation.
Thanks
Click to expand...
Click to collapse
mine only take 3 hours at the service center in Jaipur
Y0annC said:
Hello,
My phone got hard bricked yesterday after the MIUI 11 update. It was running fine before on lastest MIUI10 global ROM with persistent TWRP, root and magisk. Bootloader is unlocked.
The phone dont turn on anymore and just show a white notification led when plugged to a PC. No recovery or fastboot access
If i press volume up when i plug it to my pc, it show up as "Mediatek USB Port" and disappear after 5 seconds.
I tried to open the phone/ removing battery, shorting EDL test points, but nothing happens.
My only solution appears to be using Sp_flash_tool but seems like i need an authorized Mi account flash the stock ROM.
Do someone know where i can get acces to one of those account ?
Thanks for your replies guys !
Click to expand...
Click to collapse
hi
does anyone find a solution for this?
please help
Well there is now a way to bypass the need for an authorized account, if you device is unbricked. Basically if you flash this before you brick your phone, it allows you to use sp flash to unbrick it without authorized account.
Read this thread:
https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527
JuanM2020 said:
Well there is now a way to bypass the need for an authorized account, if you device is unbricked. Basically if you flash this before you brick your phone, it allows you to use sp flash to unbrick it without authorized account.
Read this thread:
https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527
Click to expand...
Click to collapse
doesn't work
samadsaba said:
doesn't work
Click to expand...
Click to collapse
This is only for unbricked devices.... As I stated. If your device was already bricked it won't help you.
I also faced this problem... I used paid service to unbrick it... I must pay 35USD for the service.. but just wait.. If it works I will post here again. I bricked my phone when flashed anti brick on Android 10.. I forgot downgrade it to Android 9