Develop Bugs

[Q] Xperia ion wont turn on

Hi Guys please Help.when I try to modify my framework.jar and restart my phone my phone got bootloop. suddenly i switched off my phone by pressing volume+ or power button and my phone vibrate 3 times then my phone switch off.i tried to reflash my with flash tool but my phone doesn't switch on. no led,no display.nothing happen just dead.i tried to repair my phone with sony update service but same nothing happen.please help guys.i love my phone very much.my phone is already have 60% charged.please help somebody.
sorry for my bad english ....

You can follow 2 methods.
Easy but time consuming method:
Connect your phone to charger and wait untill it automatically reboot. The flash ftf file. (It may take 10-15 hours or more to reboot)
Difficult but fast method.
Dessemble your phone. Remove/disconnect battery cable from your phone. Reconnect it. Connect it to flashtool as fast as you can and flash ftf file.
Sent from my LT28h using xda app-developers app

pharix said:
You can follow 2 methods.
Easy but time consuming method:
Connect your phone to charger and wait untill it automatically reboot. The flash ftf file. (It may take 10-15 hours or more to reboot)
Difficult but fast method.
Dessemble your phone. Remove/disconnect battery cable from your phone. Reconnect it. Connect it to flashtool as fast as you can and flash ftf file.
Sent from my LT28h using xda app-developers app
Click to expand...
Click to collapse
First method is good for me because i dont want to deassamble my phone.....thanks for the help...

Hi guys i plug in my phone with charger for 12 hours.but after 12 hours orange led come up and the orange led automatically turn on or turn off continuously.when i try flash my phone with flashtool, my phone doesn't go in fastboot mode.please help somebody guys.....

You need to look for the bricked thread in general. You have two options
1. Take it apart and undo the ribbon cable.
2. Go through the steps in the bricked thread but it will take a long time and you have to plug it into the factory charge block not your computer.

zackspeed said:
You need to look for the bricked thread in general. You have two options
1. Take it apart and undo the ribbon cable.
2. Go through the steps in the bricked thread but it will take a long time and you have to plug it into the factory charge block not your computer.
Click to expand...
Click to collapse
I have such a problem too. I rooted my XPERIA Ion phone successfully and restarted. the phone was healthy and had no problem. I installed font installer and selected a font and installed it, rebooted and my phone went through bootloop and continiously restarted. XPERIA logo appeared and after several seconds disappeared for about 30-40 minutes untill it turned off and now no charge no boot and no shutdown. I tried to flash my phone by flashhtool but Windows coud not recognize my phone. Just display screen is on and no image no OS no menu is displayed and you can't access anything. please help me.
thank you

sarmican said:
I have such a problem too. I rooted my XPERIA Ion phone successfully and restarted. the phone was healthy and had no problem. I installed font installer and selected a font and installed it, rebooted and my phone went through bootloop and continiously restarted. XPERIA logo appeared and after several seconds disappeared for about 30-40 minutes untill it turned off and now no charge no boot and no shutdown. I tried to flash my phone by flashhtool but Windows coud not recognize my phone. Just display screen is on and no image no OS no menu is displayed and you can't access anything. please help me.
thank you
Click to expand...
Click to collapse
Switch off your phone and charged your phone until orange led glow.maximum charging time 15hrs to 35hrs.then you will see that orange led come up.after orange led come up charge your phone until green led.then plug out your phone and flash your phone with flash tool.
Sent from my LT28h using xda premium

As avik said you need to let it charge. You are in a soft brick state so you will need to put it on the factory charger and let it charge until you get a response from it. If you mess with it before it is ready you will only make it a longer process.
I would not try changing the font unless you are on a de odex rom. If you try to change things on a factory rom you will most likely get a boot loop.
After doing a bit of reading on the app why in the world would you even try it?? So many reviews saying it bricked the device and yet you still tried it?? Make sure you read thoroughly before you go trying out stuff. Every response for a newer device is claiming a brick so use your head.

Even i have the same problem which was said by user:avik6123 . what does reboot technically refer to is it just seeing red led light over the mobile or will it switch on automatically. i have got the red led but when i connect it to system with usb cable holding volume down key it doesnt show the green led (flash mode). only the red led is on as if it is charging. can u please help me out??

Just find the soft brick thread at the top of this forum...it'll solve nearly any software related problem you're having...its just a matter of being patient and letting the phone battery completely die...
The main soft brick most owners run in to is trying to hard reset the phone when the device is in a state that you shouldn't do that...holding volume down for 10 seconds with the power button for 3 vibrates is a sure way to completely trash the kernel if the phone is in some sort of problematic state...
you then need to make sure the phone is not responding to anything...no button presses or combinations give any sort of response...then put the phone on the WALL charger...if the battery has not died yet, you'll get no LED when plugged in...don't worry about it being plugged in, this is NOT charging the phone yet...its just a good gauge for when the battery completely dies...after 10+ hours, the LED should start to blink red...leave it on there...after another couple of hours, it should turn solid red...now you're getting somewhere...
you can either get flashtool ready and try to start flashing back to a 'safe' firmware and/or just the kernel...or leave it on the charger until its solid green...which will remove any threat of the device having enough battery to complete the charge...If you take the phone off when LED is solid red, but still not getting into flashmode properly...its need to charge a little longer, and always use the wall charger for this...it charges much faster...
NEVER try to start the phone in this state, though...you'll end up right back where you started...the brick is happening because of corrupted boot data, which will be on the device until you flash over it...the hoops you have to jump through to fix it is all because of having a sealed battery...thats why it takes so long and is so annoying, but what is causing the problem is actually very simple to fix...you just have to be patient and read all the tutorials in order to get out of it...

You don't need to put your phone to charge for like several hours, that's bull, just flash another ROM. I've done it so it works even with 0 % battery power. So anyone who want's to comment my advice, get lost.

press all button
pharix said:
You can follow 2 methods.
Easy but time consuming method:
Connect your phone to charger and wait untill it automatically reboot. The flash ftf file. (It may take 10-15 hours or more to reboot)
Difficult but fast method.
Dessemble your phone. Remove/disconnect battery cable from your phone. Reconnect it. Connect it to flashtool as fast as you can and flash ftf file.
Sent from my LT28h using xda app-developers app
Click to expand...
Click to collapse
i face that problem...and a little panic but i just pressed all bottom include the camera+vol (up/down)+power...ant the phone restart!!!

jtr165 said:
Just find the soft brick thread at the top of this forum...it'll solve nearly any software related problem you're having...its just a matter of being patient and letting the phone battery completely die...
The main soft brick most owners run in to is trying to hard reset the phone when the device is in a state that you shouldn't do that...holding volume down for 10 seconds with the power button for 3 vibrates is a sure way to completely trash the kernel if the phone is in some sort of problematic state...
you then need to make sure the phone is not responding to anything...no button presses or combinations give any sort of response...then put the phone on the WALL charger...if the battery has not died yet, you'll get no LED when plugged in...don't worry about it being plugged in, this is NOT charging the phone yet...its just a good gauge for when the battery completely dies...after 10+ hours, the LED should start to blink red...leave it on there...after another couple of hours, it should turn solid red...now you're getting somewhere...
you can either get flashtool ready and try to start flashing back to a 'safe' firmware and/or just the kernel...or leave it on the charger until its solid green...which will remove any threat of the device having enough battery to complete the charge...If you take the phone off when LED is solid red, but still not getting into flashmode properly...its need to charge a little longer, and always use the wall charger for this...it charges much faster...
NEVER try to start the phone in this state, though...you'll end up right back where you started...the brick is happening because of corrupted boot data, which will be on the device until you flash over it...the hoops you have to jump through to fix it is all because of having a sealed battery...thats why it takes so long and is so annoying, but what is causing the problem is actually very simple to fix...you just have to be patient and read all the tutorials in order to get out of it...
Click to expand...
Click to collapse
Having problems trying to download flashtool. Can not open because the file is not recognized by quicktime player. Any suggestions??? Also, my phone has been on the charger for over 12 hrs with a solid red charging light since i plugged it in.
---------- Post added at 09:16 AM ---------- Previous post was at 08:46 AM ----------
jtr165 said:
Just find the soft brick thread at the top of this forum...it'll solve nearly any software related problem you're having...its just a matter of being patient and letting the phone battery completely die...
The main soft brick most owners run in to is trying to hard reset the phone when the device is in a state that you shouldn't do that...holding volume down for 10 seconds with the power button for 3 vibrates is a sure way to completely trash the kernel if the phone is in some sort of problematic state...
you then need to make sure the phone is not responding to anything...no button presses or combinations give any sort of response...then put the phone on the WALL charger...if the battery has not died yet, you'll get no LED when plugged in...don't worry about it being plugged in, this is NOT charging the phone yet...its just a good gauge for when the battery completely dies...after 10+ hours, the LED should start to blink red...leave it on there...after another couple of hours, it should turn solid red...now you're getting somewhere...
you can either get flashtool ready and try to start flashing back to a 'safe' firmware and/or just the kernel...or leave it on the charger until its solid green...which will remove any threat of the device having enough battery to complete the charge...If you take the phone off when LED is solid red, but still not getting into flashmode properly...its need to charge a little longer, and always use the wall charger for this...it charges much faster...
NEVER try to start the phone in this state, though...you'll end up right back where you started...the brick is happening because of corrupted boot data, which will be on the device until you flash over it...the hoops you have to jump through to fix it is all because of having a sealed battery...thats why it takes so long and is so annoying, but what is causing the problem is actually very simple to fix...you just have to be patient and read all the tutorials in order to get out of it...
Click to expand...
Click to collapse
I am having problems downloading and opening flashtool. Won't open because quicktime does not recognize file. Any suggestions? Also, my phone has been on the wall charger for over 12 hours and still shows red charging light since I first plugged it in.

Mr.AnakinSkywalker said:
You don't need to put your phone to charge for like several hours, that's bull, just flash another ROM. I've done it so it works even with 0 % battery power. So anyone who want's to comment my advice, get lost.
Click to expand...
Click to collapse
What do you mean by flash another ROM. I don't know much when it comes to this stuff but my phone shut down and i could never recover. When I plug it into the wall charger, the red light comes on but I don't know what to do from here. Could you help PLEASE!

I would recommend attacking a rubber band around the volume down button while connected to the computer where flash tool is already in the flashing mode. This way, it will immediately flash as soon as it can.

424aca said:
I would recommend attacking a rubber band around the volume down button while connected to the computer where flash tool is already in the flashing mode. This way, it will immediately flash as soon as it can.
Click to expand...
Click to collapse
I can not download a flash tool program to my computer so how will it go into flashing mode. Sorry i'm not very good with this kind of stuff. I know it's frustrating. If you could give me detailed instructions, that would be greatly appreciated.
Ok, so i finally downloaded flashtool but my computer doesn't detect my phone when I plug it in. When I search for devices, my xperia ion is not in the list. Please HELP!!!!

@Shortie71
In order to even contemplate flashing, you NEED i repeat NEED flashtool.
http://www.flashtool.net/download.php
You MUST download it to flash anything onto your phone
The issue you are having is a drivers issue.
My recommendation is to ask in the MAIN question and answers thread about where and how to get drivers since your phone is already soft bricked (installing sony pc companion and inserting phone will therefore not work)
Then, you can properly flash after you have the proper drivers

424aca said:
@Shortie71
In order to even contemplate flashing, you NEED i repeat NEED flashtool.
You MUST download it to flash anything onto your phone
The issue you are having is a drivers issue.
My recommendation is to ask in the MAIN question and answers thread about where and how to get drivers since your phone is already soft bricked (installing sony pc companion and inserting phone will therefore not work)
Then, you can properly flash after you have the proper drivers
Click to expand...
Click to collapse
After the led turns green, should ı use pc companion, update service or flashtool?

pharix said:
You can follow 2 methods.
Easy but time consuming method:
Connect your phone to charger and wait untill it automatically reboot. The flash ftf file. (It may take 10-15 hours or more to reboot)
Difficult but fast method.
Dessemble your phone. Remove/disconnect battery cable from your phone. Reconnect it. Connect it to flashtool as fast as you can and flash ftf file.
Sent from my LT28h using xda app-developers app
Click to expand...
Click to collapse
please can you help me?
how can i flash a new rom in my lt28h?? PLEASE SHOW ME WHAT I SHOULD DO

flashtool
@umt_dmn

Asus Z00A bricked

Hi guys, I had my bootloader lost so i followed this guide https://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256 and it worked like a charm except for flashing OS part, on fastboot it said 'Result: Okay' but in AFT it said 'That interface is already detected in UI, please delete it and reconnect device' so I did it and still the same so since the result was okay in fastboot I wanted to try get into recovery hoping it'll start-up and just when I pressed 'vol up' button it didn't even change the choice in fastboot, screen just faded out and phone isn't even charging now, adb doesn't see it, fastboot isn't booting up, no vibration, PowerBank is detecting the device and is power draining -> phone even is heating a little like it is charging but no screen/led :crying: Help me guys, pls

Ozzy0997 said:
Hi guys, I had my bootloader lost so i followed this guide https://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256 and it worked like a charm except for flashing OS part, on fastboot it said 'Result: Okay' but in AFT it said 'That interface is already detected in UI, please delete it and reconnect device' so I did it and still the same so since the result was okay in fastboot I wanted to try get into recovery hoping it'll start-up and just when I pressed 'vol up' button it didn't even change the choice in fastboot, screen just faded out and phone isn't even charging now, adb doesn't see it, fastboot isn't booting up, no vibration, PowerBank is detecting the device and is power draining -> phone even is heating a little like it is charging but no screen/led :crying: Help me guys, pls
Click to expand...
Click to collapse
Have you sorted this ?
If not, check my unbrick vid in my signature

timbernot said:
Have you sorted this ?
If not, check my unbrick vid in my signature
Click to expand...
Click to collapse
Yeah, I did everything but in the part where you flash system I got message "Device already exists in UI, please delete and reconnect device", I did it but result was still the same, pressed volume up button to check if recovery is there and the screen just like 'faded out' and now isn't even responding, isn't seen by xfstk and stuff ;-;

Ozzy0997 said:
Yeah, I did everything but in the part where you flash system I got message "Device already exists in UI, please delete and reconnect device", I did it but result was still the same, pressed volume up button to check if recovery is there and the screen just like 'faded out' and now isn't even responding, isn't seen by xfstk and stuff ;-;
Click to expand...
Click to collapse
Do you hold down volume down key when connecting to PC via USB ?

Hnk1 said:
Do you hold down volume down key when connecting to PC via USB ?
Click to expand...
Click to collapse
it's obvious ;-;

Ozzy0997 said:
it's obvious ;-;
Click to expand...
Click to collapse
You are now bricked.
What you need to do is get the 2 vibes back at least , then your device will be seen for xFSTK downloader to re flash again.
Try charge overnight from wall charger.
Press power for a good length of time and restart the flash if you get the 2 vibes back.
Watch the video closely in the first 7 mins, I suspect you had normal bootloader tho.
Temp ifwi version after flash is 0094 0169 .
What was yours ?

timbernot said:
You are now bricked.
What you need to do is get the 2 vibes back at least , then your device will be seen for xFSTK downloader to re flash again.
Try charge overnight from wall charger.
Press power for a good length of time and restart the flash if you get the 2 vibes back.
Watch the video closely in the first 7 mins, I suspect you had normal bootloader tho.
Temp ifwi version after flash is 0094 0169 .
What was yours ?
Click to expand...
Click to collapse
I got the same ifwi, hope that 2 vibes will get back :fingers-crossed:

Ozzy0997 said:
I got the same ifwi, hope that 2 vibes will get back :fingers-crossed:
Click to expand...
Click to collapse
Reason i suspect you got normal bootloader is because after success of OS you get four colours before bootloader , which you dont mention and i have witnessed flashing ifwi and fwr dnx and it booting into bootloader without success of OS , that bootloader version was not the temp one needed to flash raw or atleast the OS partitions correctly ready for raw. Point being , i thought i was bricked but wasnt , just a temp death blank screen situation and then getting success in ifwi and fwr corrupted the device further , so a full re flash in xFSTK and success fixed it.
Getting the two vibes back is a bit hit n miss , nothing straight forward -- battery gets hammered flashing in xFSTK and usb charging isnt enough plus the fact your device might be on, yet shows no signs although it will be recycling itself till death without the juice to vibrate .
pressing power for a good length of time after a good charge , you might get one vibe depending on the state of off or on while on charge, i have had the vibes kick in halfway thru the night.
Some people have disconnected battery and reconnected to get success in xFSTK
good luck :good:

After a like 7-8h of charging it still doesn't vibrate even once

You want to let it charge for a full day without touching it
Sent from my ASUS_Z00AD using Tapatalk

Ozzy0997 said:
After a like 7-8h of charging it still doesn't vibrate even once
Click to expand...
Click to collapse
buddy you have to take out your battery and then charge it externally

Ozzy0997 said:
After a like 7-8h of charging it still doesn't vibrate even once
Click to expand...
Click to collapse
If device warmed up while on charge , then it will be charging , maybe disconnect battery and reconnect trying xFSTK.
If not warming then it's a hard wire charge like mentioned .

Well, it's working now, I had to reconnect battery and it came out that OS has been flashed but battery had an error, after reconnect it booted up like nothing happened, thanks to all of you for help

Hard bricked and Solved.

First things first, NEVER RESTORE A TWRP BACKUP YOU CREATED IN ONE VERSION IN ANOTHER VERSION.
Now coming to my situation, I installed the Deodexed Stable Zui Oreo ROM but as usual got bored with the zui and wanted to go back to my fav Pixel experience Rom so I clean flashed it from the unofficial hendibudi recovery but I couldn't use my internal storage and I once earlier read in another thread that installing 3.0.3 decrypts it so I installed that recovery and clean flashed AEX5.2 Rom this time and same internal storage problem continued so my lazy ass thought I'll restore the TWRP backup I created when I unlocked the bootloader instead of flashing through qfil and that was my mistake.
I created the backup on 3.1.0 but now I was on 3.0.3 so as soon as I restored the backup and rebooted, my phone didn't turn on, no zuk logo or led or anything, if I long press the power button it just vibrates and the led flashes for a sec, that's all.
Edit: feels like this thread belongs to the News/Discussions section than here but meh
Edit2: Solution in Post #4

It seems like qfil, mi flash method is last as your bootloader is also corrupted, and this happens because there are many critical hidden partition on our device so it mess up, when you install first twrp releases, you will notice there are 7 8 partition and in latest one they all are hidden.

narshi shukla said:
It seems like qfil, mi flash method is last as your bootloader is also corrupted, and this happens because there are many critical hidden partition on our device so it mess up, when you install first twrp releases, you will notice there are 7 8 partition and in latest one they all are hidden.
Click to expand...
Click to collapse
well if it's that easy I wouldn't be worried at all but unfortunately my situation is a bit different, I can't flash anything as my phone is recognized as 900E, to flash anything the phone should be recognized in 9008(edl) mode and for that I have to strip the cable and short circuit with it and all that, which is really a hit or miss kinda situation so kinda worried!
But seems like I have no other choice so let's see what happens, I tried stripping the stock usb cable and it got split into half lmao
now I'll buy another cable and will try the copper wire method instead of splitting it
Edit: yeah ik that different versions of TWRP are different but I wanted to restore only the data partition and my data was already encrypted so I thought I have nothing to lose, I was like if it doesn't work I'll flash the full firmware again but didn't expect it to fully brick the phone

Okay the primary reason for me creating this thread was to let y'all know how I bricked my device so that y'all won't repeat my mistake but I saw some people here and there recently asking how to resurrect their device so thought I'll share how I got mine working wishing it'll help such people.
My phone was completely dead, the hardware buttons weren't doing anything, the phone doesn't power off but all I could see was a black screen, so I had to follow THIS GUIDE.
But the above situation is a rarity, I guess most of you ppl could get to the zuk logo or your led keeps flashing and you can use your hardware buttons, in such situations, follow THIS GUIDE.
The above links are for you to get your phone to 9008 mode to be able to flash the stock firmware, but if you don't know how to flash,
refer THIS GUIDE.

Flashing problem
i got phone into 9008 port following ur guide and installed qfil everything went good problem is after hitting download buton in qfil after some time it says error "sahara failed".

seetharam55555 said:
i got phone into 9008 port following ur guide and installed qfil everything went good problem is after hitting download buton in qfil after some time it says error "sahara failed".
Click to expand...
Click to collapse
Only one solution is there.. after u get sahara error.. disconnect your phone and cable, then again turn your phone on. And then turn it off... After that press volume up+ power button simultaneously while connecting to the usb port, if you are successful, within 2-3 seconds you have to press the download button on QFIL.. then it should work... You can try 2-3 times... For demo, but thia is the only way out of this hard brick
.. i suffered in the sahara error for 3 days since i flashed OOS on my z2 , till today i finally got the solution

sidS6 said:
Only one solution is there.. after u get sahara error.. disconnect your phone and cable, then again turn your phone on. And then turn it off... After that press volume up+ power button simultaneously while connecting to the usb port, if you are successful, within 2-3 seconds you have to press the download button on QFIL.. then it should work... You can try 2-3 times... For demo, but thia is the only way out of this hard brick
.. i suffered in the sahara error for 3 days since i flashed OOS on my z2 , till today i finally got the solution
Click to expand...
Click to collapse
thanks for response.What do u mean by "succesfull".and other thing to turn off the phone it takes me nearly 2 min constant pressing of power button, is this normal.

seetharam55555 said:
thanks for response.What do u mean by "succesfull".and other thing to turn off the phone it takes me nearly 2 min constant pressing of power button, is this normal.
Click to expand...
Click to collapse
Not 2 minutes but i think 30 seconds at max.. and by successful i mean that you get into Qualcomm 9008 qdloader mode in qfil
---------- Post added at 05:13 PM ---------- Previous post was at 05:11 PM ----------
The main thing is you have to immediately press the download button(within 2-3 seconds) after reconnecting into 9008 mode

Briked my phone flasing oos, solved it in the first go usimg qpst method.

Rahil4321 said:
Briked my phone flasing oos, solved it in the first go usimg qpst method.
Click to expand...
Click to collapse
You didn't got Sahara error?

seetharam55555 said:
thanks for response.What do u mean by "succesfull".and other thing to turn off the phone it takes me nearly 2 min constant pressing of power button, is this normal.
Click to expand...
Click to collapse
Were u able to unbrick?

Thanks
sidS6 said:
Were u able to unbrick?
Click to expand...
Click to collapse
yes it worked but as u said we have to hit download button within 2 sec....thank you very much u nearly saved 1000 rupees for me.

seetharam55555 said:
yes it worked but as u said we have to hit download button within 2 sec....thank you very much u nearly saved 1000 rupees for me.
Click to expand...
Click to collapse
Congrats bro! But i lost my 3 cables in ths process.. that equals 700 rs.. but i learned a great lesson? no probs

seetharam55555 said:
i got phone into 9008 port following ur guide and installed qfil everything went good problem is after hitting download buton in qfil after some time it says error "sahara failed".
Click to expand...
Click to collapse
dude just cut the cable and make intersection betwwen vlack and gree wire and put the cable into phone , got edl mode simple ways

sidS6 said:
Congrats bro! But i lost my 3 cables in ths process.. that equals 700 rs.. but i learned a great lesson? no probs
Click to expand...
Click to collapse
Why did you wasted 3 cables for?

seetharam55555 said:
Why did you wasted 3 cables for?
Click to expand...
Click to collapse
Coz while spliiting, one got split into half ? and the other one got bent so it was unusable.. i had buy the third one

sidS6 said:
Coz while spliiting, one got split into half ? and the other one got bent so it was unusable.. i had buy the third one
Click to expand...
Click to collapse
Ohh you tried that method i did like this

sidS6 said:
You didn't got Sahara error?
Click to expand...
Click to collapse
You don't need to flash via qpst when you see logo but device wont boot it mean you locked your bootloader so all you need to do is unlock it again that's all

Nirmal0001 said:
You don't need to flash via qpst when you see logo but device wont boot it mean you locked your bootloader so all you need to do is unlock it again that's all
Click to expand...
Click to collapse
Unfortunately learnt this after unbricking my device

I had installed RR mix rom in my Zuk Z2 plus. while trying to enter fastboot mode, it went off. Now it is completely dead. not being recoganized in my PC.In device manager it is not shown. Tried to deep flash through Qfil, but didn't recoganize port.If i plug in charger also no LED indication, If I disconnect battery & plug in for charging, white LED slowly blinks, in the same mode if I connect charger blinking white LED continues. But once I remove charge & reconnect it shows nothing. again if I remove battery & reconnect, again white LED starts blinking. Apart from this nothing is shown, phone completely dead. Can anybody help please. I tried through Qfil, tried by shorting black & green cable, all types of key combinations.

Device redmi 1s dead please help !!!!!

Accidentally my phone droped on the floor after that it kepps the mi logo loop after some time the battery got dead and phone also not charging. While connecting to the charger cable the led blinking and looping. Buy my phone doesn't charging and while on the flash process without battery the fastboot mode opens and closes rythmically.and my computer doesn't take the time to load the drivers. Now what to do feeling dizzy....
Please help me out of this problem. I think it bricked but not hard. Because the fastboot logo comes but not more than 5 seconds it goes off. Please help

Try giving it to a local repair store.
I also had the same problem. If I used to remove and put the battery back, it used to reboot. I tried flashing using fastboot, but it used to reboot every 6 seconds. According to some friends of mine (Thanks to them) I gave it to a store, which in turn (I dunno how) hardbricked the device. I connected it to the PC, tried to go to fastboot, and it shows up as QCOM Loader 9008, which basically tells you your device is hardbricked.
Fastboot didn't work.
Using MiFlash Tool, while flashing through the QcomLoader, it showed "Did not receive hello packet"
Tried many times more, didn't work out.
So, I went and tried the trusted method: TEST POINT method.
It worked out. Now my armani is up and running!
TL : DR;
Try giving it to a local repair store (not Mi service center, they didn't help me AT ALL.)
Something might have dislodged.
Or
Try testpoint method, google for it
it *might* work. Well, that worked for me.

Not end at all
Hi, sorry for very late reply
Recently I discovered that the battery is dead not working at all. And while doing the test point method I think battery power is needed! So I ordered a spare battery after the delivery I will do the test point method agian. Currently if I plug in my phone thorough usb to my computer the qcom 9008 port shows but while flashing it gets detached then re shows up . And the flashtool error happens. I think a battery power is required so that this failure is happening.
So, what do you think is edl mode requires battery power?.
Need help because I have to fix it. It's my one and only loved phone of all time.
Currently I am using my friends phone to discuss about this matter.....please help me.....

parag2001 said:
Hi, sorry for very late reply
Recently I discovered that the battery is dead not working at all. And while doing the test point method I think battery power is needed! So I ordered a spare battery after the delivery I will do the test point method agian. Currently if I plug in my phone thorough usb to my computer the qcom 9008 port shows but while flashing it gets detached then re shows up . And the flashtool error happens. I think a battery power is required so that this failure is happening.
So, what do you think is edl mode requires battery power?.
Need help because I have to fix it. It's my one and only loved phone of all time.
Currently I am using my friends phone to discuss about this matter.....please help me.....
Click to expand...
Click to collapse
You do not need battery power for test point method.

Z2 plus Fully Dead

My z2+ firstly bricked then i tried to flah via qfil .
Everything was going right but suddenly during the downloading process qfil has error and phone got disconnected. Then i tried everything to go to edl mode again but not able to do that.
Now phone has nothing even there is no zui logo appers.
Tried charging but it vibrated flashed the led light every 10 sec and there is no detect in the pc for this device now.
What to do?

Shubham_rbt said:
My z2+ firstly bricked then i tried to flah via qfil .
Everything was going right but suddenly during the downloading process qfil has error and phone got disconnected. Then i tried everything to go to edl mode again but not able to do that.
Now phone has nothing even there is no zui logo appers.
Tried charging but it vibrated flashed the led light every 10 sec and there is no detect in the pc for this device now.
What to do?
Click to expand...
Click to collapse
Try that Short circuit cable trick.

0
gt20 said:
Try that Short circuit cable trick.
Click to expand...
Click to collapse
Done Nothing happened
the port not detected 1ng7z3o3tkWChzOtbFAjNyzMY02Q5Vx0H (google drive screen shot of qfil)

try removing battery or drain battery to zero and try again the button combination

miju12 said:
try removing battery or drain battery to zero and try again the button combination
Click to expand...
Click to collapse
I Just Put a Rubber bend and a way that it is holding the power button but it is taken already 4+ hrs but still battery is there in the device

0
miju12 said:
try removing battery or drain battery to zero and try again the button combination
Click to expand...
Click to collapse
I am Trying to drain the battery using the rubber band holding the power button.
but it taken 4+hrs already but still not fully drain the battery.
To add the Download process on QFIL was more than 50% when there was error.

Shubham_rbt said:
I am Trying to drain the battery using the rubber band holding the power button.
but it taken 4+hrs already but still not fully drain the battery.
To add the Download process on QFIL was more than 50% when there was error.
Click to expand...
Click to collapse
you have to be patient while doing these things

miju12 said:
you have to be patient while doing these things
Click to expand...
Click to collapse
now the thing is that its fully drain but even tried charging/connecting to pc no detection found.
Even there is no zui logo even if i charged it again for 1 hr.
even in normal case the device is not being recognised by pc there is nothing indicated by pc that something has been plugged in.
(to add pc ports are working fine,usb c type is also fine only problem with device)
has been fully discharged again what to do now.

Try deep flash by using some kind of deep flash cable,it worked for me:victory:

Arun teja said:
Try deep flash by using some kind of deep flash cable,it worked for me:victory:
Click to expand...
Click to collapse
Finally finally the phone is now set
i donut know what happened a miracle happened and i was just playing like everytime ( everyday i used to take 15-30 mins) to get if my phone is getting recognised by pc ... suddenly phone gets recognised when i was giving up fot the day.. then i tried but there was an error ..
now i dont give up and tried 50 times...
it got yehhh!!!

Need Help!
Shubham_rbt said:
Finally finally the phone is now set
i donut know what happened a miracle happened and i was just playing like everytime ( everyday i used to take 15-30 mins) to get if my phone is getting recognised by pc ... suddenly phone gets recognised when i was giving up fot the day.. then i tried but there was an error ..
now i dont give up and tried 50 times...
it got yehhh!!!
Click to expand...
Click to collapse
i too got into same situation. Can you please help me with this weird situation? Device got disconnected while flashing via qfil. Now no zuk logo nothing. Phone vibrates every 30 sec that's it. Wont even gets recognized by my laptop(no 9008 or 900e port!)

Shubham_rbt said:
now the thing is that its fully drain but even tried charging/connecting to pc no detection found.
Even there is no zui logo even if i charged it again for 1 hr.
even in normal case the device is not being recognised by pc there is nothing indicated by pc that something has been plugged in.
(to add pc ports are working fine,usb c type is also fine only problem with device)
has been fully discharged again what to do now.
Click to expand...
Click to collapse
Try the short circuit trick while battery is discharged or zero, although it is quite difficult to confirm so when the phone's dead