Related
Hi I have a ed88 mtk6575 512mb ram and 4GB hd this is a tablet phone , it has 2 sim cards and I'd like to root it, I'm totally newbie, so please include step by step for this device.
It has android ics 4.0.4 build number ALPS.ICS.MP.V2.2 So if someone knows how to root one of this, please let me know.
Also is there is a way to make a custom rom for Jellybean that will be used on this phone? and what programs are available for it, please advice.
Thanks,
Gus
gusduenas said:
Hi I have a ed88 mtk6575 512mb ram and 4GB hd this is a tablet phone , it has 2 sim cards and I'd like to root it, I'm totally newbie, so please include step by step for this device.
It has android ics 4.0.4 build number ALPS.ICS.MP.V2.2 So if someone knows how to root one of this, please let me know.
Also is there is a way to make a custom rom for Jellybean that will be used on this phone? and what programs are available for it, please advice.
Thanks,
Gus
Click to expand...
Click to collapse
hi,
you can try 'Tpsparky root' in your tablet. it is for any Mt6575 devices.
But FIRST BACKUP YOUR ROM - NANDROID BACKUP. If anything go wrong, you can reflash the Rom, Also I am not responsible for any failure (Every developer or mate tells like these)
you can try here - the first file - xfab rooting.zip
http://forum.xda-developers.com/showthread.php?p=32932373
first install mtk6575 driver in pc and then click bat file.
Sparky root didn't work with mine, I have to use the root root with restore by binary and it was rooted...thanks anyway. Do you know where can I find a custom rom (paranoid maybe) able to work with the mtk6575 chipset or now that my phone is rooted, how can I retrieve the binary blobs, vendor libs, device kernel and device tree?
Please help.
gusduenas said:
Sparky root didn't work with mine, I have to use the root root with restore by binary and it was rooted...thanks anyway. Do you know where can I find a custom rom (paranoid maybe) able to work with the mtk6575 chipset or now that my phone is rooted, how can I retrieve the binary blobs, vendor libs, device kernel and device tree?
Click to expand...
Click to collapse
I have 10 same devices with this build : ALPS.ICS.MP.V2.26
7 inch with 2 sim dual camera with back flash.mtk 6575 2G.
>>>>>>All of them have problem charging when the are off tablet hangs and need to reset. but if turned on are OK. So I need to reset them during off powered charge.
I think charging animation in off mode has a bug!
What can I do? can I change the low level animation?
or I saw some other tablets automaticly turning on when I plug the charger.so is it possible to make the tablet automaticly turned on when plugged to charger???
The brand looks same as ALPS and it works as a 9220 mtk 6575 phone but it is 7 inch tablet.
hello, sorry for the late reply, I can change the gross icons and images using phothosop and using the update logo and bootanimation.zip. it is easy, you just have to upload to an external sd card the following files:
boot_logo
startup.bmp
battery.bmp
low_battery.bmp
use the update logo from external sd from recovery menu.
My two cents.
Gus
Any one know if it is possible to get a new screen for the ED88?
Root and GAPPS instruction for TCL P600
Since TCL P600, TCL P606 and Alcatel One Touch Snap 7025D are the same phones I just write about TCL P600 now. But it's working for both.
TCL P600 root package: http://www.4shared.com/zip/3HRtqraE/TCL_P600_Root.html
HowTo Root TCL P600:
- Extract the file
- Start the flash tool in extracted folder
- Make sure under options it is choosen “with battery”
- In FlashTool load scatter file contained in folder
- Click checkboxes of BOOTIMG and RECOVERY
- Doubleclick on BOOTIMG and refer to TCL-P600_130417__boot_patched_130508-162244.img
- Doubleclick on RECOVERY and refer to TCL-P600_130417__recovery_130508-162244.img
- Switch off mobile and unplug it from usb
- Click “download” in flash tool
- Plug in usb in phone
- If you get a green circle from flash tool saying OK you’re ready with root shell
- Unplug phone and reboot into CWM
- Start Droidtools and plugin usb to phone again
- Install superuser of your choice into phone.
- Ready – you have full root to phone.
If you experience any problems please check if you used the right drivers. Please check drivers attached in folders. Only use them.
Here is the JB gapps zip for flashing with CWM: http://goo.im/gapps/gapps-jb-20121011-signed.zip
Full instruction of getting a well working TCL P600:
1. First of all I updated the phone with TCL updater to the latest firmware.
2. I rooted it as I described before.
3. I deleted lots of China Apps and also under system/media bootup sounds and some - for me - other stuff not needed in order to get more space on system partition.
4. I installed GAPPS through CWM. I did it with this one: http://goo.im/gapps/gapps-jb-20121011-signed.zip
After rebooting I got crash of google search. I ignored it and added my google account. After opening playstore then I got update for google search. After updating there is no crashing anymore.
All other gapps are working quite well. I tested GPS for the TCL P600 and was really suprised it works quite fast and accurate.
The only thing: There is no A-GPS setting. Let's say: There is no GPS setting at all. You can only switch GPS on and off. Settings are not included. Maybe this will be unlocked with a modded rom.
I'm now testing all functions in detail but up to now it works really great.
Hope you got it also up to this point. After all steps this phone is really perfect.
------------------
If you brick your phone you have a brick Not my fault. I don't take responsibility of that my instruction will work for you. It worked for me. So now it's up to you.
I tried what you say but no thing happened .
I have alcatel one touch snap
Where can i buy
Mr.Mahmoud.Pro said:
I tried what you say but no thing happened .
I have alcatel one touch snap
Click to expand...
Click to collapse
Hi Mahmoud,
I want to know where you bought the mobile.. i was searching a lot over the internet and local stores to buy "alcatel one touch snap 7025D" mobile but i couldn't find it anywhere in my area (Andhra pradesh, India.) can you please tell a place or online website where i can find the mobile?
internal memory
hey i'm want to know if the root is swap bet. internal & external memory
that for games over 3 Gega
Custom Recovery
Hey i want to know if this recovery can be ported to my phone the alcatel one touch fierce it is the same as th one touch snap/7025d just without the 8mp camera and splash water proofing everything else is the same i had tried the aoutomatic port for CRR recovery but when it flashed the recovery i got a security error on my alcatel that says "error 101 unaouthorized software installed "it would not boot upand was bricked i bought the same phone again and i am wondering how y'all ported it to the fierces sister phone the one touch snap .thanks and have a great day
I don't know about porting possibility. I guess there is no way. This thread is not about changing the ROM but just how to root the TCL. There is no custom ROM out actually. So I don't see chances to port. Why should this be necessary? Is the stock ROM having problems?
Gesendet von meinem GT-N8000 mit Tapatalk
hello weimerd
my problem is that I have rooted the phone but when i delete Chinese applications to install gapps I deleted the app that handles the notification bar and other things, don't have notifications bar
the keyboard works, after loading another
google search don't work
Do I have to reload the firmware? Where do I can download the stock rom P606 TCL? to star again.
or
How I can recover this app? Can you pass me the app that has that control?
Can you say that apps I have to delete?
sorry by my english
weimerd said:
I don't know about porting possibility. I guess there is no way. This thread is not about changing the ROM but just how to root the TCL. There is no custom ROM out actually. So I don't see chances to port. Why should this be necessary? Is the stock ROM having problems?
Gesendet von meinem GT-N8000 mit Tapatalk
Click to expand...
Click to collapse
NO i just want to see if thos recovery could work in the case that ne2w rom development would occur and to create a backup for people who need it that is why i wanted to see if it could be ported
Solved the problems
Solved the problems.
I was able to upgrade wiht "TCL 2.7.4 Updater Setup.exe" the mobile software, I had the "TCL 2.7.9 Updater Setup.exe" version and this version told me it was updated. When I tested with 2.7.4 has recharged my sw and have gone back to the top, I rooted again with wiemerd instructions and now everything has worked correctly.
Thank you for your instructions and weimerd Sixpenny by spend "TCL S 2.7.4 Updater Setup.exe" saved me.
:laugh::laugh::laugh::laugh::good::good::good::good::good:
Hi all.
Is possible to port or create any custom rom for this device?
Thanks
Hi,
i have Snap 7025X, can this root steps bee used for that version too? Looks like OS is same, i have SIM management even i have 1 sim card.
root ^^^^^
Yeah this root will work if not try kingo root its great plus its one click just t urn on debugging. And make sure that your pc recognizes the phone also try motochopper
angort14 said:
Yeah this root will work if not try kingo root its great plus its one click just t urn on debugging. And make sure that your pc recognizes the phone also try motochopper
Click to expand...
Click to collapse
Thank you, i will try. I must install some other version of OS, official is fully bugged. After i used ROMs from xda for last 2 years, on my old phone, i forgot how bugged is official android.
There are so much crashes with official version, corupted SD card and so on...
please help me. after reflashing of my rom with flash tool. i have lost my imei and i have not done backup of my efs. my alcatel ot 7025d can't recognize any sim. i need efs backup or way to solve of my problem. i live in ivory coast there are not alcatel sav in this country.
I used kingo for root. Its really one click root tool. If your phone is rooted, you can restore to default. You can try to restore it with that tool.
Anyone know where to download Custom Boot Loader and Newer version of OS?
I have huge problem with this phone. There is all the time problem with memory card. I am using kingston class 10, 16gb memory but from time to time, after i take some picture or use default gallery, i get message that my memory card is corrupted. I need to restart phone and everything is ok, but sometimes it require even 3-5-7 restarts and its really anoying. Cant take pictures, use ringtone from memory cartd etc.
I tried with official updater but still use 4.2.1 version. Anyone have any newer custom rom?
Sorry for off topic but i am sure that this problems can be solved with some newer OS.
Pavankumar1889 said:
Hi Mahmoud,
I want to know where you bought the mobile.. i was searching a lot over the internet and local stores to buy "alcatel one touch snap 7025D" mobile but i couldn't find it anywhere in my area (Andhra pradesh, India.) can you please tell a place or online website where i can find the mobile?
Click to expand...
Click to collapse
You have a credit card to buy online ????
EmptySD said:
I used kingo for root. Its really one click root tool. If your phone is rooted, you can restore to default. You can try to restore it with that tool.
Anyone know where to download Custom Boot Loader and Newer version of OS?
I have huge problem with this phone. There is all the time problem with memory card. I am using kingston class 10, 16gb memory but from time to time, after i take some picture or use default gallery, i get message that my memory card is corrupted. I need to restart phone and everything is ok, but sometimes it require even 3-5-7 restarts and its really anoying. Cant take pictures, use ringtone from memory cartd etc.
I tried with official updater but still use 4.2.1 version. Anyone have any newer custom rom?
Sorry for off topic but i am sure that this problems can be solved with some newer OS.
Click to expand...
Click to collapse
I have the same problem, did you get any solution?
Regards
jobenja5 said:
I have the same problem, did you get any solution?
Regards
Click to expand...
Click to collapse
I mentored few problems, i dont know what do you mean.
EmptySD said:
I mentored few problems, i dont know what do you mean.
Click to expand...
Click to collapse
Have you solved the problem with the SD error?
jobenja5 said:
Have you solved the problem with the SD error?
Click to expand...
Click to collapse
Yes, buy new card I tried million things, formatted card using computer, phone, different phone etc. At the end, i bought new card and there is no problems at all. I give my card to my gf and she is using card without problem for last half year.
Hello everybody,
It's nearly my first week with my new Samsung Galaxy Tab S 10.5 LTE T805 and I have to admit that,
it is an AwEsOmE experience Great features, fantastic speed, Whoahow screen and colors, e.t.c
But to my also great surprise, I found out that although I have connected my USB stick to my tablet using a microUSB-to-USB
cable, there is no way to "see" it. The USB is formatted in NTFS and I know that there are issues between that and Android, but
I couldn't believe that there isn't a workaround to that problem. Before the Samsung tablet I had an Asus Transformer TF700 Pad with a matching keyboard which by the way had a USB 2.0 port and i could connect my USB sticks and USB HDDs without any issues. It was on JellyBean stock root and ofcourse rooted. Thank God i didn't give it away!!! Until there is a solution on the horizon, with my Samsung:crying: I am going to do all the downloads and transfers to USBs with my Asus.
So this where I need your experience and your knowledge.
Is there something wrong with my tablet, my microUSB cable or it is a known problem regarding the Android?
Is there a way to bypass this problem that anyone from the community might know?
So practically the microUSB port exists only to charge our tablet? What happens if someone wants to put a USB stick in the proccess, because that someone wanted to transfer a number of files from his tablet at home to the PC at work?
Please, I would appreciate it if you could help me out with your knowledge
Thank you in advance for your time,
P.S.
My Samsung is rooted with Stock root KitKat and TWRP custom recovery installed
You need need a different kernel as the stock kernel doesnt natively support ntfs, however apparantly skyhigh kernel does http://forum.xda-developers.com/gal...ent/kernel-skyhigh-tw-kernel-synapse-t2854933
You also need the correct usb otg cable. This one works fine http://www.ebay.co.uk/itm/Dual-Powe..._MobilePhoneDataCables_JN&hash=item1c48b0c84a
Yes, as previously stated that my SkyHigh kernel does support NTFS r/w (amongst many other things).
You will require an app to mount r/w, paragon app is recommended. Else you can have r/o access with root type file explorer to /mnt/ntfs/.....
Thank you very much for your help, @ashyx, @UpInTheAir
But to tell you the truth I am quite afraid to flash a new kernel to my tablet, for 2 reasons mainly
1) I don't know the proccess of doing it
2) I am afraid that it might be too complicated workaround for a noob like me and I don't think I will complete
such a difficult task:crying:
Do you happen to know if with the upcoming Android - 5.0 Lollipop version, that matter will be solved?
So until further notice I will only buy the USB Hub that you recommended and I will keep my Asus tablet (which has has a keyboard with USB2.0 port that works) until Samsung finally decides to solve that matter once and for all for the millions of people out there.
Thank you very much for your time,
dinothenino said:
Thank you very much for your help, @ashyx, @UpInTheAir
But to tell you the truth I am quite afraid to flash a new kernel to my tablet, for 2 reasons mainly
1) I don't know the proccess of doing it
2) I am afraid that it might be too complicated workaround for a noob like me and I don't think I will complete
such a difficult task:crying:
Do you happen to know if with the upcoming Android - 5.0 Lollipop version, that matter will be solved?
So until further notice I will only buy the USB Hub that you recommended and I will keep my Asus tablet (which has has a keyboard with USB2.0 port that works) until Samsung finally decides to solve that matter once and for all for the millions of people out there.
Thank you very much for your time,
Click to expand...
Click to collapse
1) Read the relevant kernel thread, it has INSTRUCTIONS. ..
2) It's not a work-around. It's actually the only solution. I will be blunt, if you believe it's too difficult to follow my thread requirements, instructions and other info, then best you forget about NTFS.
LP probably won't solve NTFS support, because Samsung doesn't enable it in stock kernel.
Thank you very much UpInTheAir for your quick reply,
If it is the only solution, then I will read your kernel thread and your instructions and by the end
of that proccess I will have NTFS support on my tablet.
But nothing of this would have been possible for all of us without your precious work and help @UpInTheAir
Much obliged
dinothenino said:
Thank you very much UpInTheAir for your quick reply,
If it is the only solution, then I will read your kernel thread and your instructions and by the end
of that proccess I will have NTFS support on my tablet.
But nothing of this would have been possible for all of us without your precious work and help @UpInTheAir
Much obliged
Click to expand...
Click to collapse
Just make sure the correct kernel is flashed for your device model
kernel v2.5.0 is latest for T805 and use paragon app from Google Play ( give SU access )
I've implemented a lot of support into kernel for synapse app, you don't need it, but there are many kernel tweaks available by using it.
Best of luck and good reading
The process of installing the kernel is far easier than you probably imagine. However you will need to be rooted to install a custom kernel. Thankfully this process is also very simple with CF AUTO ROOT .
My advice is this : root your tablet, install flashify from play store, back up your stock kernel with it, then use it to install Sky High kernel. Done.
Thanks to UpinTheAir for the kernel. I have done a fair bit of kernel and Rom development myself in the past, so I know the time and effort that developers put into these things. :good:
dinothenino said:
Thank you very much UpInTheAir for your quick reply,
If it is the only solution, then I will read your kernel thread and your instructions and by the end
of that proccess I will have NTFS support on my tablet.
But nothing of this would have been possible for all of us without your precious work and help @UpInTheAir
Much obliged
Click to expand...
Click to collapse
go get one of thesse.
http://www.mymemory.co.uk/OTG-Micro-USB/SanDisk/SanDisk-64GB-Ultra-Dual-OTG-Micro-USB-Flash-Drive
i went pc world and they had them watiing in store. so easy just plug and play! can swap info on my stock tab s 8.4 , also works on my rooted oneplud and the stock nexus 9.
saves you the effort of flashing kernel and also messing up the secure kernel flag, ( i think flashing will make 0x1x show on boot?) KNOX i believe its called. my s4 had it, something to do with warranty flag at samsung
iamdarren said:
go get one of thesse.
http://www.mymemory.co.uk/OTG-Micro-USB/SanDisk/SanDisk-64GB-Ultra-Dual-OTG-Micro-USB-Flash-Drive
i went pc world and they had them watiing in store. so easy just plug and play! can swap info on my stock tab s 8.4 , also works on my rooted oneplud and the stock nexus 9.
saves you the effort of flashing kernel and also messing up the secure kernel flag, ( i think flashing will make 0x1x show on boot?) KNOX i believe its called. my s4 had it, something to do with warranty flag at samsung
Click to expand...
Click to collapse
He wishes NTFS .....
Thank you all for your interest and your kind advice regarding Android and NTFS compatibility,
After long thought I have decided to get rid of NTFS format which is not supported by my android tablet
and go for the new and much promising exFAT which is supported by many platforms.
So I took one of my USB sticks and formatted using exFAT, then copied all my files in and then I connected it with my
microUSB cable to my Samsung tablet. Voila!!! Everything worked like a charm! I "saw" my USB right away from my file
explorer and i was able to copy back and forth from it, even a couple of my bluray movies
So finally after taking into consideration everything you told me, and after reading a lot of posts on this forum I decided
to follow that course and I am very happy with my choice so far:fingers-crossed:
But the choice I made is a result of the precious knowledge and kind help that is provided by the members of this community to all of us noobs:cyclops: seeking help.From the bottom of my heart thank you all for your kindness that you showed me and the help that you provided:good:
God saves the xdadevelopers:good:
iamdarren said:
go get one of thesse.
http://www.mymemory.co.uk/OTG-Micro-USB/SanDisk/SanDisk-64GB-Ultra-Dual-OTG-Micro-USB-Flash-Drive
i went pc world and they had them watiing in store. so easy just plug and play! can swap info on my stock tab s 8.4 , also works on my rooted oneplud and the stock nexus 9.
saves you the effort of flashing kernel and also messing up the secure kernel flag, ( i think flashing will make 60x1x show on boot?) KNOX i believe its called. my s4 had it, something to do with warranty flag at samsung
Click to expand...
Click to collapse
The plugging in of a usb drive is not the issue. You can do that with a cheap otg cable and any storage device. As said its ntfs support, its silly that this isnt supported by default.
ashyx said:
The plugging in of a usb drive is not the issue. You can do that with a cheap otg cable and any storage device. As said its ntfs support, its silly that this isnt supported by default.
Click to expand...
Click to collapse
Yup, I couldn't agree more with that. It really sucks that NTFS is not supported and as all indications show will not be, at least in the near future
So for me exFAT is the second best option in order to bypass this lack of NTFS support on Android.
UpInTheAir said:
He wishes NTFS .....
Click to expand...
Click to collapse
You can format you usb stick, external hdd to exfat file sistem. No root neded, no kernel. Just a functional usb otg cable.
dinothenino said:
Hello everybody,
It's nearly my first week with my new Samsung Galaxy Tab S 10.5 LTE T805 and I have to admit that,
it is an AwEsOmE experience Great features, fantastic speed, Whoahow screen and colors, e.t.c
But to my also great surprise, I found out that although I have connected my USB stick to my tablet using a microUSB-to-USB
cable, there is no way to "see" it. The USB is formatted in NTFS and I know that there are issues between that and Android, but
I couldn't believe that there isn't a workaround to that problem. Before the Samsung tablet I had an Asus Transformer TF700 Pad with a matching keyboard which by the way had a USB 2.0 port and i could connect my USB sticks and USB HDDs without any issues. It was on JellyBean stock root and ofcourse rooted. Thank God i didn't give it away!!! Until there is a solution on the horizon, with my Samsung:crying: I am going to do all the downloads and transfers to USBs with my Asus.
So this where I need your experience and your knowledge.
Is there something wrong with my tablet, my microUSB cable or it is a known problem regarding the Android?
Is there a way to bypass this problem that anyone from the community might know?
So practically the microUSB port exists only to charge our tablet? What happens if someone wants to put a USB stick in the proccess, because that someone wanted to transfer a number of files from his tablet at home to the PC at work?
Please, I would appreciate it if you could help me out with your knowledge
Thank you in advance for your time,
P.S.
My Samsung is rooted with Stock root KitKat and TWRP custom recovery installed
Click to expand...
Click to collapse
calinormy said:
You can format you usb stick, external hdd to exfat file sistem. No root neded, no kernel. Just a functional usb otg cable.
Click to expand...
Click to collapse
I know that. ..
The OP specifically stated he was using NTFS. I gave him the only option if NTFS was required.
He's using an alternative, exFAT may not mount to some OS though. ...
I dont think some people are quite getting it here. I have several drives that are already ntfs and full of data, formatting is not an option. I'm guessing the op is the same.
ashyx said:
I dont think some people are quite getting it here. I have several drives that are already ntfs and full of data, formatting is not an option. I'm guessing the op is the same.
Click to expand...
Click to collapse
Yup, the OP remains the same, me
If you have as many disks as you have and with lots of data on them, then yes you are absolutely right, it gonna take lots of hours of copying and pasting files back and forth until you are done
But it is the only way I can think of, unless ofcourse you want to flash another kernel which supports NTFS
And I was told by the kind developer himself it comes by the name of SkyHigh kernel and supports NTFS r/w
My way is an easy workaround to a problem (By changing from one file system to another) and his way is a solution to the problem.(By keeping the same filesystem)
Ofcourse you can use the way that suits you best
Need desperate help with a MediaTek clone of S4
Hi everyone,
I will try and keep it short but last night I was badly scammed by a wonderful specimen of the human race, who wanted to sell his old Samsung S4. Turns out:
1. Its a mediatek clone
2. It has more issues than anticipated but all buttons work.
3. Seem to be soft bricked
Now I am facing nothing but patience to try and fix it. What works:
1. All buttons seem functional.
2. The phone boots into normal mode where I have only empty screen with a Phone app. The Phone app opens I can enter digits but cannot dial.
3. I can reboot into Factory mode - I performed all the tests of the device and all were a PASS. I heard the sounds, checked the cam, everything seems to be perfectly working. Touch scree, camera, sound etc. Even noticed it had FM.
I tried booting in Download Mode - no success. I get the dead Android image and it just hangs there. I can easy reboot though.
My PC recognizes the device and opens a media (empty) device folder.
I tried thus far to use SP Flash but....I dont know how to. Nothing is happening.
Of course I spent 6 hours waiting on different stock ROMs for S4 before realizing its a MediaTek device.
And now, here I am desperately asking if anyone could help me, if there is a chance to remedy that situation of mine. I dont need the phone to do anything special. The closer it is to a Samsung Android ROM - awesome. If its other, I dont mind at all. So long as it works and has access to Google Play Store.
Thank you geniuses and wonderful people for any hint you might have.
Hi
I had a similar issue couple of yrs ago with an S3 clone.
First thing u need to knw is the mtk version, memory details (RAM & ROM) and screen resolution to find a suitable OS version.
If ur lucky, ull get the stock ROM from the manufacturer on Google or else ull hafta search on xda, needrom, or the Chinese forums. Most of such devices don't have a lot of development so ull hafta port ROMs so a custom recovery will b helpful
Hope these points help
Sent from my YU5510 using Tapatalk
Ok.
So I need:
Device RAM
Device ROM
Mtk Version
I think I can extract these from the Factory Mode. Will check.
Then I need to get the stock ROM (hopefully) or search for a custom ROM. (Manufacturer I suppose we talk about MediaTek and not Samsung?)
Custom Recovery - yeah, usually this is the first thing I install but how do I do this on a cloned mtk? I suppose ODIN wont work. Can you lastly point me to a link or name of software to use instead of ODIN? (or will it work with ODIN?)
Greetings
I got a notification that there is an update to one ui 5 _ android 13 available. i connected the phone to the charger, started update and went to sleep (since the internet speed is slow here and takes a long time to download the data). after i woke up, i faced a bootloop on my phone.
i cleared the cache and repaired apps in recovery menu (based on a guide on some website), but it didn't help. what should i do?
* my phone doesn't have a warranty anymore.
First wait for an hour if it boots up if not wipe all the data
Oh my, I just faced the exact same problem WITH the exact same phone! :')
Don't bother with technicians, tried with two and they both said wiping data was the only way. I was thinking of trying with the Samsung Support Center but eh, they're closed tomorrow (italian holiday lmao)
Anyways, I believe doing a hard reset would resolve everything, but I'm assuming you don't want to..
I got a whole lot of help in here, if you want to check!
https://forum.xda-developers.com/t/...p-after-device-is-stuck-on-boot-loop.4536965/
Let me know if you're able to do something!
Alslamalikom (Peace be upon you) .. I hope you are well.... I had the same problem, in samsung a22 4g after updating Android 13, it only turned on the Samsung logo, then it restart.. Bootloop
I just subscribed.. to warn you so that no one will make same mistake .. My storage size is 128 GB and it is full of family personal and for me, and it was not possible to format it so as not to lose it.. Also, the mobile was under warranty, and I did not want to go to the agency, because they would say format or they would be able to open it, and it contains special family things
So I used Odin and the ROM version a225fxxu3cvk3 and another object such as bootloader and others, and the download began, and all my hope is to open The device does not delete anything
Thank Allah , in any case, the device was opened, but an automatic format was made for the device and everything was lost as if it was new... So I liked that no one did and lost his data as me🥹
And as kind member here called (nanawa) said, try when an update comes out, not the same ROM or Older than on the mobile phone
But everyone who installs the ROM is at her/his own risk
I will put it here and 2 another topics related to the problem and i will leave
Best wishes,, alslamalikom
Muslim for Allah said:
Alslamalikom (Peace be upon you) .. I hope you are well.... I had the same problem, in samsung a22 4g after updating Android 13, it only turned on the Samsung logo, then it restart.. Bootloop
I just subscribed.. to warn you so that no one will make same mistake .. My storage size is 128 GB and it is full of family personal and for me, and it was not possible to format it so as not to lose it.. Also, the mobile was under warranty, and I did not want to go to the agency, because they would say format or they would be able to open it, and it contains special family things
So I used Odin and the ROM version a225fxxu3cvk3 and another object such as bootloader and others, and the download began, and all my hope is to open The device does not delete anything
Thank Allah , in any case, the device was opened, but an automatic format was made for the device and everything was lost as if it was new... So I liked that no one did and lost his data as me🥹
And as kind member here called (nanawa) said, try when an update comes out, not the same ROM or Older than on the mobile phone
But everyone who installs the ROM is at her/his own risk
I will put it here and 2 another topics related to the problem and i will leave
Best wishes,, alslamalikom
Click to expand...
Click to collapse
Wa ʿalaykumu s-salam, i want to ask a question, was the device bootloader unlocked with the important data or was it locked?