CyanogenMod 14.1 is a free, community built, aftermarket firmware distribution of Android 7.1.x (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Other Issues Not in Known Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking or ask the same question over and over again.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
If you have a hard reboot (to the vendor boot logo, not the CM boot logo), use adb or any other file explorer tool to pull a copy of
/sys/fs/pstore/console-ramoops (command: adb pull /sys/fs/pstore/console-ramoops)
after the reboot and provide that.
Note: We will not support any kind of modification on the ROM not done by our sources. If you are running XPosed, Kernel Booster or whatever occurs to you, we won't support you in any way. The problem will in every case be treated as the additional softwares' fault (because often it is!)
Download Links
CyanogenMod: ROM @ http://download.crpalmer.org/nightlies/pme-cm-14.1/
Google apps addon:
We are using Open GApps (Link) Arm64 version. (make sure to use 64bit when using other packages), others might also be working and make sure you download the right version. I do not recommend stock or full or anything that replaces default apps as this has been known to cause problems (e.g. replacing the dialer with a stock dialer can make it crash).
Note: In case you want to use any gapps, YOU MUST install the right gapps the first time that you flash a marshmallow or later ROM. Do not boot with an older gapps or without one and then try to install it later.
Note: If you install a package which replaces the default dialer (mostly "Stock Gapps") you have to go to Settings->Apps->Gear-Icon and set the new dialer as a default telephony app to prevent force closing of apps
Known Issues
SELinux is in permissive mode
Bluetooth headsets do not work for wide band voice calls (narrow band calls work)
LiveDisplay doesn't work
LED notification settings are available but don't work
Home "button" cannot be disabled, even when using virtual keys
Home "button" cannot be long pressed
Fingerprint sensor does not work if you are on M firmware
Magnet detection/Ice View not working
Rear Camera Force Closes when enabling HDR (? is this a problem on N, I haven't tested it)
If you encounter any other issues, please let me know with:
logs
steps to reproduce
carrier
firmware: stock M or N as your last RUU/official update
problems reported without all of this information will usually be ignored and even occasionally flamed...
XDA:DevDB Information
CyanogenMod 14.1, ROM for the HTC 10
Contributors
crpalmer
Source Code: https://github.com/CyanogenMod/android_kernel_htc_msm8996
ROM OS Version: 7.x Nougat
Version Information
Status: Nightly
Created 2016-12-17
Last Updated 2016-12-29
Reserved
Reserved
About to try this new one with firmware 401.9 Nougat...is tested for that firmware or it's only for M firmware?
--anx-- said:
About to try this new one with firmware 401.9 Nougat...is tested for that firmware or it's only for M firmware?
Click to expand...
Click to collapse
I am using N firmware.
crpalmer said:
I am using N firmware.
Click to expand...
Click to collapse
...and that's what I wanted to hear...:laugh:
Just the time to install it and stock opengapps...
---------- Post added at 04:54 PM ---------- Previous post was at 04:06 PM ----------
Fingerprints and home button don't work...Had to flash a fix zip in order to let home and FP go ok.
Audio is ok.
Don't know about GPS, but it seems to be ok...
Pretty solid release, at least my first impression.
there it comes . 14.1 hit much earlier than 13
Is woofer working?
And no audio from play music app and cm music ...From YouTube yes.
Woofer ok. GPS I doubt.
Maybe the audio from music wasn't fixed yet...
--anx-- said:
And no audio from play music app and cm music ...From YouTube yes.
Woofer ok. GPS I doubt.
Maybe the audio from music wasn't fixed yet...
Click to expand...
Click to collapse
Audio is working perfectly for me (except for headphones which will be fixed in the next build). YouTube and Google Play Music.
GPS is working perfectly for me.
What firmware are you running and please provide logs (and steps to reproduce, which you did) or else I tend to ignore your report of something not working...
Thx for your work @crpalmer..
3MK744070S306872R
??
crpalmer said:
Audio is working perfectly for me (except for headphones which will be fixed in the next build). YouTube and Google Play Music.
GPS is working perfectly for me.
What firmware are you running and please provide logs (and steps to reproduce, which you did) or else I tend to ignore your report of something not working...
Click to expand...
Click to collapse
i am on MM firmware , my condition is same as you said . headphone fix and its done , 14.1 done. nice job man .
crpalmer said:
Audio is working perfectly for me (except for headphones which will be fixed in the next build). YouTube and Google Play Music.
GPS is working perfectly for me.
What firmware are you running and please provide logs (and steps to reproduce, which you did) or else I tend to ignore your report of something not working...
Click to expand...
Click to collapse
Firmware 2.28.401.9 on HTC 10 International (HTC__001) running Italian operator. The one with no red text, posted in the news and guide section.
I've installed rom, fpfix.zip in order to have home and FP works, and after that STOCK gapps pack, latest.
EDIT:
This is the logcat.
Steps: booted first, initial settings, 2 updates from play store and then immediately into play music. Only one song plays, everything else not.
Choosen ONLY DOWNLOADED MUSIC for having only SD songs.
--anx-- said:
Firmware 2.28.401.9 on HTC 10 International (HTC__001) running Italian operator.
Click to expand...
Click to collapse
Hey, try with some FLACs? I got FLACs to work but not MP3s.
Posted logcat into previous post.
Not flaming, as you can see...but only trying to understand why music won't play...
Camera crash on startup after enableing power shutter
Open camera > Swipe from left to open menu > Click on settings > Advanced > Enable "Power shutter" > Swipe Camera app from recents > Open camera > Crash
Clearing Camera app data makes it work again.
Carrier: Vodafone Germany
Firmware: 1.95.401.5 MM
--anx-- said:
Firmware 2.28.401.9 on HTC 10 International (HTC__001) running Italian operator. The one with no red text, posted in the news and guide section.
I've installed rom, fpfix.zip in order to have home and FP works, and after that STOCK gapps pack, latest.
EDIT:
This is the logcat.
Steps: booted first, initial settings, 2 updates from play store and then immediately into play music. Only one song plays, everything else not.
Choosen ONLY DOWNLOADED MUSIC for having only SD songs.
Click to expand...
Click to collapse
Try with viper4aries-for me fixed Google Play music.
--anx-- said:
Posted logcat into previous post.
Not flaming, as you can see...but only trying to understand why music won't play...
Click to expand...
Click to collapse
To get a meaningful logcat, you need to enable root in developer options. Without it, it looks like all you get is the logcat generated by the program itself and not the system messages.
Strange but I've enabled root... Ran the first time and saw from options that was required root for additional info, so I've enabled it and then done again same steps...
dj_chapz said:
Camera crash on startup after enableing power shutter
Open camera > Swipe from left to open menu > Click on settings > Advanced > Enable "Power shutter" > Swipe Camera app from recents > Open camera > Crash
Clearing Camera app data makes it work again.
Carrier: Vodafone Germany
Firmware: 1.95.401.5 MM
Click to expand...
Click to collapse
I don't have much practice with reading logs, but I found this:
Unable to start activity ComponentInfo{com.android.camera2/com.android.camera.CameraActivity}: java.lang.SecurityException: No permission to prevent power key: Neither user 10050 nor current process has android.permission.PREVENT_POWER_KEY.
It seems to be a permission issue? Maybe the app doesn't have that permission declared, it isn't granted, or something similar? crpalmer will probably know.
Related
CyanogenMod 13.0 is a free, community built, aftermarket firmware distribution of Android 6.0.x (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Note: This thread is not about:
- Other devices!
- General Honor 5X stuff (Unlocking, Emui, going back to Stock, Updating Stock...)
- Aliens, UFOs, ...
-> Generally: ANYTHING not specifically about CyanogenMod 13.0 for Honor 5X
Important Notice:
Code:
As of July 19, an upgrade of the firmware to MM-Firmware is required ([URL="http://forum.xda-developers.com/showpost.php?p=67840582&postcount=1813"]Link to instructions[/URL],
possibly find your firmware update here: [URL="http://forum.xda-developers.com/honor-5x/how-to/repository-honor-5x-file-depot-t3328288"]LINK[/URL] - note: not related to us, thanks @clsA).
If you run a device below the required firmware,
flashing will fail due to checks in the upgrade package! (No, you shouldn't remove the checks!)
In that case please use a build of July 18 or below. (Link: [URL="https://www.androidfilehost.com/?w=files&flid=72880"]clsA's repo[/URL])
Please DO NOT complain about this, we are not responsible for non-released firmwares
and other things not directly under our control. Please also DO NOT ask for any support
of firmware update in this thread! Go to Q&A section and create or use an existing thread there!
Preparation
To make sure you can run the builds from July 20 and up, please do the following
(For all commands please copy everything between the quotes not including them! All commands require to press [ENTER] to execute)
1) Open the terminal app or connect via computer and type "adb shell"
2) Type "su"
3) Type (or copy)
strings /dev/block/platform/soc.0/7824900.sdhci/by-name/tz | sed 's/QC_IMAGE_VERSION_STRING=//p;d'
4) Compare the output to:
TZ.BF.3.0.C3-00025
5) Are they equal? Go on with the instructions and use a newer build
They are different? -> Go with build of July 18
Instructions
First time flashing CyanogenMod 13.0 on your device, or coming from another ROM?
1) Read this post completely! Make sure you are aware of the issues!
2) Download the zip(s).
3) Install a compatible Recovery (e.g. TWRP (Link))
4) Perform a NANDroid backup of your current ROM (Optional)
5) Wipe data & cache partitions of your device (required when coming from stock!).
6) Flash CyanogenMod.
7) Optional: Install the Google Apps addon package. (Pay attention to the note in "Download links"!)
Changelog
Device tree
Kernel tree
Generic CM tree
Broken Features / Known Issues
camera does not support HDR photos - no need to try other camera apps, it's disabled completely!
dt2wake doesn't use the proximity sensor to filter bogus d2twake triggers and therefore can turn on too easily in your pocket,
but it DOES work without proximity sensor
Builds older than July 20: fingerprint sensor not implemented! (Do not even ask for it, search the thread!)
smart view case support
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking or ask the same question over and over again.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
If you have a hard reboot (to the vendor boot logo, not the CM boot logo), use adb or any other file explorer tool to pull a copy of
/sys/fs/postore/console-ramoops
after the reboot and provide that.
Note: We will not support any kind of modification on the ROM not done by our sources. If you are running XPosed, Kernel Booster or whatever occurs to you, we won't support you in any way. The problem will in every case be treated as the additional softwares' fault (because often it is!)
Download Links
CyanogenMod: ROM @ http://download.crpalmer.org/nightlies/kiwi-cm-13.0
Google apps addon:
(Note: Not required to run the ROM)
We are using Open GApps (Link) Arm64 version. (make sure to use 64bit when using other packages), others might also be working
Note: In case you want to use any gapps, YOU MUST install the right gapps the first time that you flash a marshmallow ROM. Do not boot with an older gapps or without one and then try to install it later.
Note: If you install a package which replaces the default dialer (mostly "Stock Gapps") you have to go to Settings->Apps->Gear-Icon and set the new dialer as a default telephony app to prevent force closing of apps
XDA:DevDB Information
CyanogenMod 13.0 Builds, ROM for the Honor 5X
Contributors
crpalmer, BadDaemon
Source Code: https://github.com/CyanogenMod/android_kernel_huawei_kiwi
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Beta
Created 2016-03-25
Last Updated 2016-07-27
Reserved
Known Issues:
Moved to first post (above).
Other Issues:
If I don't list it as a known issue, it means I do not think it's a problem because I have never encountered whatever you think is broken.
If you post "_____ is broken", I will ignore it unless you:
* Provide appropriate logs
* Provide clear instructions to reproduce the problem or a statement that it just randomly happens
* Have the problem on a "clean" install (see below).
Getting Logs:
You can use SysLog by Tortel from the play store to get logcats (Main Log), dmesg (Kernel log) and Radio Logs. These will capture the log after the fact. You can also get the logs via adb:
PHP:
adb logcat -v time -d > logcat.txt
adb logcat -v time -b radio -d > radio.txt
adb shell dmesg > dmesg.txt
You can use either a file explorer app that allows root access or adb to get the last kernel log. Via adb you would plug your phone into a computer that has adb access to it and run
PHP:
adb root
adb pull /sys/fs/postore/console-ramoops
Appropriate Logs:
If you have a hard reboot (to the vendor boot logo, not the CM boot logo), the only log that will contain useful information if the last kernel log. All other logs are cleared on a reboot and will be useless.
If you have any issue with telephony, wifi, bluetooth or anything related to externally communicating via your phone, please provide all 3 logs (logcat, radio log and kernel log).
If you submit radio logs, please do so via a PM as the logs may contain phone numbers and other information such as your IMEI.
Clean Install:
If you have a reproducible problem:
* Backup your current install in twrp (so you can go back to it, if you want, when you're done)
* Factory reset
* Wipe system
* Install CM, install GApps (and not one that replaces system apps like the camera, especially if you think the camera is broken!)
* Do not install anything else, do not restore anything else via Google, Titanium Backup, etc.
* DO NOT INSTALL Xposed
* Install the apps that you need to reproduce the problem
* Collect logs
* Restore your backup
If the problem is not reproducible, you still need to run on a clean install and wait for it to happen. In this case do:
* Backup your current install in twrp (so you can go back to it, if you want, when you're done)
* Factory reset
* Wipe system
* Install CM, install GApps (and not one that replaces system apps like the camera, especially if you think the camera is broken!)
* Do not install anything else, do not restore anything else via Google, Titanium Backup, etc.
* Install the apps that you need on your phone via Play Store and do not restore data from anywhere or install any other tweaks, scripts.
* DO NOT INSTALL Xposed
* Wait for it to happen
* Collect logs
* Restore your backup
Note: We will not support any kind of modification on the ROM not done by our sources. If you are running XPosed, Kernel Booster or whatever occurs to you, we won't support you in any way. The problem will in every case be treated as the additional softwares' fault (because often it is!)
Reserved
So happy to see marshmallow come to this amazing device. Many thanks to all contributing
crpalmer said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Click to expand...
Click to collapse
Thanks @crpalmer. You might want to change above to 6.0.x
Sent from my A0001 using Tapatalk
Keep getting "App not responding" every few minutes. Not sure if I'm the only one.
Going to flash it right now; fingers crossed.
Thanks for your work @crpalmer
InfamousGam3r said:
Keep getting "App not responding" every few minutes. Not sure if I'm the only one.
Click to expand...
Click to collapse
Same Issue, Facebook and Messenger.
Damn bro... You're amazing.... I would love to taste marshmallow on this device but i think I'll refrain until some important bugs are fixed.... Thnx a lot for your hard work
Sent from my KIW-L21 using Tapatalk
Elmerdus said:
Same Issue, Facebook and Messenger.
Click to expand...
Click to collapse
Yep, exact same problem[emoji14]Facebook and Messenger seem to be giving that error on cm13 3/24/16
Sent from my KIW-L24 using Tapatalk
Amazing work this is the first time I'm actually using marshmallow . The rom feels a bit slower than the lolipop version, but hey having shower in the acid feels better than using the stock rom.
right now the battery indication seem to be stuck at 100%, need to reboot to check if it is actually valid.
Battery works now I have to allow all this user permissions
---------- Post added at 09:31 AM ---------- Previous post was at 09:23 AM ----------
InfamousGam3r said:
Yep, exact same problem[emoji14]Facebook and Messenger seem to be giving that error on cm13 3/24/16
Sent from my KIW-L24 using Tapatalk
Click to expand...
Click to collapse
mine works pretty well for messenger and.... restoring facebook..... yup works perfectly; I'm using custom booster so maybe?
nemexs said:
Amazing work this is the first time I'm actually using marshmallow . The rom feels a bit slower than the lolipop version, but hey having shower in the acid feels better than using the stock rom.
right now the battery indication seem to be stuck at 100%, need to reboot to check if it is actually valid.
Battery works now I have to allow all this user permissions
---------- Post added at 09:31 AM ---------- Previous post was at 09:23 AM ----------
mine works pretty well for messenger and.... restoring facebook..... yup works perfectly; I'm using custom booster so maybe?
Click to expand...
Click to collapse
What do you mean "custom booster"? I was coming from CM12.1 with GApps Arm64 5.1 Minimal, updated to CM13 (3/24/16) and GApps Arm64 6.0 Micro
InfamousGam3r said:
What do you mean "custom booster"? I was coming from CM12.1 with GApps Arm64 5.1 Minimal, updated to CM13 (3/24/16) and GApps Arm64 6.0 Micro
Click to expand...
Click to collapse
skynet project
http://forum.xda-developers.com/android/software-hacking/android-l-booster-1-soon-t3030796
The apps that didn't run properly from the titanium I reinstalled them.
For developer: Battery indicator is bugging out again, rebooting........ same problem, removed the gravity box [MM]; busybox has a problem too. Ok Google seems to crash every time I reboot.
Workaround the batter indicator bug: if you are plugged to a power charger the indicator works perfectly.
Update: busybox works with graphics just crashing, but app working well.
nemexs said:
skynet project
http://forum.xda-developers.com/android/software-hacking/android-l-booster-1-soon-t3030796
The apps that didn't run properly from the titanium I reinstalled them.
For developer: Battery indicator is bugging out again, rebooting........ same problem, removed the gravity box [MM]; busybox has a problem too. Ok Google seems to crash every time I reboot.
Workaround the batter indicator bug: if you are plugged to a power charger the indicator works perfectly.
Click to expand...
Click to collapse
Going to try and use that custom booster you linked me to, reinstalling CM13 again (reverted back to CM12 earlier because of a few issues). Doing it all fresh this time, just hate having to re-arrange my stuff haha.
Thanks,
@crpalmer , call recording works on cm13 .
Doze is working fine .
Major bugs are battery status and all CPUs online .
If you could fix this , cm13 comes to use as a daily drive .
Still getting "Unfortunately, *APP* has stopped." on CM13 3/24/16. Clean install. CM13 > GApps Arm64 6.0 nano
InfamousGam3r said:
Still getting "Unfortunately, *APP* has stopped." on CM13 3/24/16. Clean install. CM13 > GApps Arm64 6.0 nano
Click to expand...
Click to collapse
Are you l24 or l21? :/
http://opengapps.org/ This one? arm64 6.0 nano works fine for me
nemexs said:
Are you l24 or l21? :/
http://opengapps.org/ This one? arm64 6.0 nano works fine for me
Click to expand...
Click to collapse
KIW-L24
and... OpenGapps ARM64 6.0 nano.
InfamousGam3r said:
KIW-L24
and... OpenGapps ARM64 6.0 nano.
Click to expand...
Click to collapse
Maybe l24 problem? I'm using it on l21 and the only thing that's bugging is "OK Google." Have you tried redownloading it?
Lineage is a free, community built, aftermarket firmware distribution of Android 7.x (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Lineage is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. Lineage does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for Lineage is available in the Lineage Github repo. And if you would like to contribute to Lineage, please visit out Gerrit Code Review.
What's Working
Boots
RIL(CALL,SMS,DATA)
CAMERA
AUDIO
WIFI
BLUETOOTH
VIDEOS
FLASH
SENSROS
GPS
What's Not Working
LED Blinking.
Off charge doesn't work don't let your battery die always put it in charging mode when your battery gets to 5%
Install instructions:
Reboot into recovery (latest TWRP recommended).
Wipe Data, System,Dalvik Cache,Cache and install.
No wipes required if you're updating from a previous version of CM 14.0 (Cache and Dalvik Cache Wipe recommended).
Flash ROM + Gapps.
Reboot.
Read post 2 before reporting bugs.
Changelog.
Download links
Rom - https://sourceforge.net/projects/android-rom-ota/files/LineageOS/Z010D/
OMS(Substratum) - https://sourceforge.net/projects/android-rom-ota/files/LineageOS-OMS/Z010D/
More Roms - https://sourceforge.net/projects/android-rom-ota/files/?source=navbar
Gapps - opengapps.org
Note - This isn't my work main developer of this project is audahadi so leave a like and support.
DONATION IS NOT NECESSARY BUT IT'LL HELP TO PAY SERVER BILLS.
Donate via PayPal - [email protected]
Credits
audahadi
luk1337
luca020400
Source
Device Tree - https://github.com/audahadi/android_device_asus_Z010D.git
Common - https://github.com/audahadi/android_device_asus_qcom_common.git
Vendor - https://github.com/audahadi/android_vendor_asus_Z010D.git
XDA:DevDB Information
LineageOS, ROM for the Asus ZenFone 2
Contributors
ShadowReaper1, audahadi, luk1337, luca020400
Source Code: https://github.com/kernel-hut/android_kernel_asus_msm8916.git
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Marshmallow Bootloader/Modem
Version Information
Status: Testing
Created 2016-12-02
Last Updated 2017-12-09
Reserved
SOME RULES
PLEASE USE GIVEN SECTIONS ABOVE TO SORT EVERYTHING YOU HAVE IN YOUR MIND FOR EXAMPLE IF YOU WANT TO REPORT A BUG USE BUG REPORT SECTION ANY BUG REPORTS GIVEN IN THE COMMENT SECTIONS WILL BE IGNORED SAME GOES FOR EVERYTHING.
First Read The OP And Use The Search Box To Find Your Issue There's A Chance That Somebody Already Might Have Faced The Same Issue Before And Fixed It.
Bug reports:
Explain how to reproduce the bug and attach logcat and dmesg (if you had a random reboot, also attach last_kmsg). If you don't know how to get those, you can use this app. Please, do not report bugs if you use any kind of mods (like xposed) or third party kernel.
Frequently Asked Questions:
Q) How can I unlock Developer options?
A) Go to Settings > About phone, and press five times on Build number.
Q) How can I enable root access?
A) Go to Settings > Developer options > Root access, and enable it for apps, adb or both.
Q) How can I set '3G only' network mode?
A) Open dialer, dial *#*#4636#*#* , open first option "Phone Information", there you can set your preferred network mode.
Q) Why there's a small delay when I wake up the phone?
A) Go to Settings > Display & lights and disable prevent accidental wake-up.
Q) Why is wifi always on in battery stats, even when it was disabled?
A) Go to Settings > Location, press on the 3 dots (top right) > scanning > disable wifi.
Q) How do I update Gapps? (Also useful if you have Gapps related problems).
A) Reboot into recovery. Wipe System, Cache and Dalvik Cache. Install ROM + Gapps. Reboot.
Reserved
Marshmallow Bootloader/Modem
If you are using stock lollipop rom then you must flash any stock marshmallow rom before upgrading to CyanogenMod else it won't boot.
When you say ASUS PixelMaster Camera is not working does it mean that the camera features of the phone will not work, even after using 3rd party app?
Thinking of updating to cyanogenmod and sorry this will be my first time in rooting / flashing to custom roms.
rmatheist said:
When you say ASUS PixelMaster Camera is not working does it mean that the camera features of the phone will not work, even after using 3rd party app?
Thinking of updating to cyanogenmod and sorry this will be my first time in rooting / flashing to custom roms.
Click to expand...
Click to collapse
Fixed in next build.. Just hold on few more
Sent from my Zenfone Max using Tapatalk
audahadi said:
Fixed in next build.. Just hold on few more
Sent from my Zenfone Max using Tapatalk
Click to expand...
Click to collapse
can't wait for the next build. thank you very much for your awesome work!
DT2W
Hi. off screen gestures are working well. though, DT2W just like in the AICP ROM is not working.
looking forward for the camera fix missed the camera 360 already
Realized now that SMS is not working for me . Can't firm conversations at all, error. How to troubleshoot?
ekeluo said:
Realized now that SMS is not working for me . Can't firm conversations at all, error. How to troubleshoot?
Click to expand...
Click to collapse
Try to use other external messaging apps and read reserved post 2.
khiya said:
looking forward for the camera fix missed the camera 360 already
Click to expand...
Click to collapse
Camera Fixed
ShadowReaper1 said:
Try to use other external messaging apps and read reserved post 2.
Click to expand...
Click to collapse
I think this is useful.
The app you linked to doesn't work, fails on start. Used Matlog instead (had to manually enable storage access from settings)
Is it just me that cannot access my sdcard using the default file explorer of cyanogenmod? I could only access my internal storage
rmatheist said:
Is it just me that cannot access my sdcard using the default file explorer of cyanogenmod? I could only access my internal storage
Click to expand...
Click to collapse
yup. Cant access mine too. I use 3rd party file manager.
ShadowReaper1 said:
Camera Fixed
Click to expand...
Click to collapse
do I need to factory data reset/ wipe system to install 14.x? I'm already in CM13
khiya said:
do I need to factory data reset/ wipe system to install 14.x? I'm already in CM13
Click to expand...
Click to collapse
you have to. Wipe dalvik cache, cache, data, system and internal (optional). Our cm14 is not an update of our cm13. Hope it helps.
Is it ok to use custom kernel with this rom??
Can I use this rom with this custom kernel?
http://forum.xda-developers.com/zenfone2/general/kernel-reaper-t3468632/page6#post69918890
Build - 20161202
d2tw not work
ekeluo said:
I think this is useful.
The app you linked to doesn't work, fails on start. Used Matlog instead (had to manually enable storage access from settings)
Click to expand...
Click to collapse
Fixed: has to delete the SMS database, which changed location in Nougat. Working now!
Hi, there's a problem. I've accidently discharged my phone, when I plug usb to charge it, it's constantly turning on, then it realises that charge is 0% and it turns off. Again and again, on-off-on-off... I think it's a kind of firmware bug. How can I fix it? I even cant access TWRP. Only fastboot mode (up+power). The firmware is great, but now I cannot use phone
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Important information:
This thread is for Unofficial CyanogenMod 13.0 builds for v1a3g (SM-P901). The following will not be supported here:
* Custom kernels
* Mods
* Xposed
I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
* Flashed a custom kernel
* Installed or did mods from untrusted sources
* Modified system files
NOTICE:
This ROM may still have some bugs (although minor). Most things work except:
mic
Ok Google
S-Pen works with S-Pen apps (paint, notes, etc.). No popup will appear on removal.
If you find other issues (CM13 issues) please post them. May take a while to fix but they will be worked on.
ALSO - please DO NOT ask about CM14 - it is being looked into - no other info available.
Installation
First time flashing CyanogenMod 13.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash CyanogenMod
Install the Google Apps addon package (Optional)
Reboot
Other issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs! You can use this: https://play.google.com/store/apps/details?id=com.tortel.syslog&hl=en
Downloads
12/11 build
Google Drive: SM-P901-CM13
Mega Drive: SM-P901-CM13
One Drive: SM-P901-CM13
Old Downloads
Changelog:
12/11
Initial Release
Google Apps:
http://opengapps.org/- thanks to the OpenGapps team!
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Source:
Kernel: https://github.com/exynos5420/android_kernel_samsung_exynos5420
Device Tree: https://github.com/exynos5420/android_device_samsung_ha3g
Credits:
@UpInTheAir for his kernel magic and misc fixes
@crpalmer (for picassowifi device and kernel gits)
@eousphoros (for his work on klimtwifi)
@nvertigo67 (for his work on chagallwifi)
@Nexorrr (for his work on chagalllte)
@tincho5588(For testing my builds on device)
Exynos5420 Dev Team (@deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart)
This rom requires the Marshmallow boot loader.
gcrutchr said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Important information:
This thread is for Unofficial CyanogenMod 13.0 builds for v1a3g (SM-P901). The following will not be supported here:
* Custom kernels
* Mods
* Xposed
I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
* Flashed a custom kernel
* Installed or did mods from untrusted sources
* Modified system files
NOTICE:
This ROM may still have some bugs (although minor). Most things work except:
mic
Ok Google
S-Pen works with S-Pen apps (paint, notes, etc.). No popup will appear on removal.
If you find other issues (CM13 issues) please post them. May take a while to fix but they will be worked on.
ALSO - please DO NOT ask about CM14 - it is being looked into - no other info available.
Installation
First time flashing CyanogenMod 13.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash CyanogenMod
Install the Google Apps addon package (Optional)
Reboot
Other issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs! You can use this: https://play.google.com/store/apps/details?id=com.tortel.syslog&hl=en
Downloads
12/11 build
Google Drive: SM-P901-CM13
Mega Drive: SM-P901-CM13
One Drive: SM-P901-CM13
Old Downloads
Changelog:
12/11
Initial Release
Google Apps:
http://opengapps.org/- thanks to the OpenGapps team!
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Source:
Kernel: https://github.com/exynos5420/android_kernel_samsung_exynos5420
Device Tree: https://github.com/exynos5420/android_device_samsung_ha3g
Credits:
@UpInTheAir for his kernel magic and misc fixes
@crpalmer (for picassowifi device and kernel gits)
@eousphoros (for his work on klimtwifi)
@nvertigo67 (for his work on chagallwifi)
@Nexorrr (for his work on chagalllte)
@tincho5588(For testing my builds on device)
Exynos5420 Dev Team (@deadman96385 @[email protected]@[email protected]@[email protected]@thermskin, @javelinanddart)
Click to expand...
Click to collapse
After one day , I found some bugs.
This cm ROM doesn't detect current battery status correctly. I plugged my charger to sm-p901 , unfortunately after 12 hours the battery status represents "50 %".
Second bug is WiFi . I have to select a bandwidth from 1 to 13 manually to connecting into my home wireless router.
Hope you fix this. Thank u so much
mohsenfa01 said:
After one day , I found some bugs.
This cm ROM doesn't detect current battery status correctly. I plugged my charger to sm-p901 , unfortunately after 12 hours the battery status represents "50 %".
Second bug is WiFi . I have to select a bandwidth from 1 to 13 manually to connecting into my home wireless router.
Hope you fix this. Thank u so much
Click to expand...
Click to collapse
Battery level has always been a issue with cyanogen mod (your battery is charging, though) - at least on all the ones I have tried. Do a google search for battery calibration.
Wifi - did you do a data wipe (try that) - also make sure your router is set to auto for band; and finally, in wifi settings, select forget network and try to reconnect.
gcrutchr said:
Battery level has always been a issue with cyanogen mod (your battery is charging, though) - at least on all the ones I have tried. Do a google search for battery calibration.
Wifi - did you do a data wipe (try that) - also make sure your router is set to auto for band; and finally, in wifi settings, select forget network and try to reconnect.
Click to expand...
Click to collapse
There is serious problem with battery, therefore there are so many apps which claim to calibrate battery, which one do you suggest to use?
mohsenfa01 said:
There is serious problem with battery, therefore there are so many apps which claim to calibrate battery, which one do you suggest to use?
Click to expand...
Click to collapse
Never used a battery calibration app - usually wait for green light to come on so I know battery full.
I suggest do a google search for cynogenmod and battery charging issue.
gcrutchr said:
Never used a battery calibration app - usually wait for green light to come on so I know battery full.
I suggest do a google search for cynogenmod and battery charging issue.
Click to expand...
Click to collapse
OK , how about s pen smart text selection?
mohsenfa01 said:
OK , how about s pen smart text selection?
Click to expand...
Click to collapse
If you are looking for the s-pen to work for everything like a Samsung rom, it won't.
As I stated in post #1, the s-pen works with apps that support it.
gcrutchr said:
If you are looking for the s-pen to work for everything like a Samsung rom, it won't.
As I stated in post #1, the s-pen works with apps that support it.
Click to expand...
Click to collapse
Ok, this rom have issue to connecting into wireless routsr with auto band
gcrutchr said:
Battery level has always been a issue with cyanogen mod (your battery is charging, though) - at least on all the ones I have tried. Do a google search for battery calibration.
Wifi - did you do a data wipe (try that) - also make sure your router is set to auto for band; and finally, in wifi settings, select forget network and try to reconnect.
Click to expand...
Click to collapse
I found there is serious WiFi channel issue in all marshmallow devices, just google these words:
Marshmallow WiFi channel
It seams this android version has disability to find WiFi units with channel 13 or 1. What's your opinion ?
mohsenfa01 said:
I found there is serious WiFi channel issue in all marshmallow devices, just google these words:
Marshmallow WiFi channel
It seams this android version has disability to find WiFi units with channel 13 or 1. What's your opinion ?
Click to expand...
Click to collapse
My wifi router (Thailand) has channels 1-13. I have no problem connecting with this rom or any other, including my Galaxy S3 which is on CM, my iPad Pro, my Note 5 and my Note Pro 12.2 (3g).
Did you clear the data before installing rom? Did you clear cache and dalvik cache?
Try downloading WIFI Analyzer on Play Store....maybe it will help.
Modem?
The sm-p901 has LTE, is this rom has it???? or I need to install custom
timmyhoa34 said:
The sm-p901 has LTE, is this rom has it???? or I need to install custom
Click to expand...
Click to collapse
This device should only have 3G.
timmyhoa34 said:
The sm-p901 has LTE, is this rom has it???? or I need to install custom
Click to expand...
Click to collapse
The SM-P901 does not have LTE. It is a 3G device.
There is nothing you can install to get LTE. LTE is part of the modem and the only Note Pro 12.2 device that has it is the P905 series.
Excellent
Thanks for this beautiful 6.0.1 ROM....great boost from stock 5.0.2 which was sluggish...very fast and stable...no issues to complain up to now...really appreciate you guys!!!
MyoMinhtoo said:
Thanks for this beautiful 6.0.1 ROM....great boost from stock 5.0.2 which was sluggish...very fast and stable...no issues to complain up to now...really appreciate you guys!!!
Click to expand...
Click to collapse
You're welcome!
Is it possible to switch from android to another one ? Like Ubuntu or windows 10 ?
mohsenfa01 said:
Is it possible to switch from android to another one ? Like Ubuntu or windows 10 ?
Click to expand...
Click to collapse
Windows 10? No
Linux? I have read about people running linux on an android tablet. Search XDA for the thread. It's under Android Software Development or Android Software and Hacking General.
Thank you.
How can i compile from source code?
e-sh said:
Thank you.
How can i compile from source code?
Click to expand...
Click to collapse
In the 1st post there are links to the source code. You need to set up your computer 1st to build android.
Then you can get the base android source from github and the v1a3g source code from the link in post #1.
Unofficial LineageOS 14.1 for Sony Z1 Compact
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
General
This is an unofficial LineageOS 14.1 as is build for the Sony Z1 Compact, (Amami/D5503).
The builds will be builds when i want it, as long as LineageOS updates and support LineageOS 14.1 or when it goes official.
I won't include features that I dislike. If u want something else, build it.
Install
How to install:
New Install (coming from another ROM)
Do a full backup with your favorite latest Nougat compatible recovery (3.1.0.0 ATM)!
Download the Rom zip and an OpenGapps file for 7.1.2, 32 bit, Arm
Do a full wipe in recovery (data/factory reset, system)
Install the Rom zip and Gapps zip through recovery compatible with Nougat!
Enjoy!
Coming from previous version of LOS14.1
Do a full backup with your favorite latest Nougat compatible recovery!(optional, for if things go wrong)
Download the Rom zip
Install the Rom zip (and Gapps if getting erros with Google services) through recovery compatible with Nougat!
Enjoy!
Downloads
Latest-Rom: lineage-11-20170810-UNOFFICIAL-smi.zip
XDA Download Section
Github Version number is different
Project manifest
Manifest/Roomservice
Bugs/Issues
HW overlay needs to be disabled for some full screen video applications and front camera
Bluetooth may not work as expected
Reboot to recovery doesn't always work
Needs a compatible recovery to install
Camera may not work 100%
Will never pass full CTS test?
Wifi starts without data connection after reboot
NFC HCE will maybe never be supported, used for android pay
Thanks and credits
SpiritCroc
SuperLamic
All MSM8974 Maintainers
Sony (OSS)
LineageOS
All the rest that have helped to construct these builds and develop software for Z1 Compact directly or indirectly in the past.
XDA:DevDB Information
Unofficial LineageOS 14.1, ROM for the Sony Xperia Z1 Compact
Contributors
Hazou
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Testing
Current Beta Version: lineage-14.1-2017080
Beta Release Date: 2017-08-10
Created 2017-07-14
Last Updated 2017-08-10
Hazou said:
Unofficial LineageOS 14.1 for Sony Z1 Compact
I won't include features that I dislike. If u want something else, build it.
2017-07-14
Click to expand...
Click to collapse
Nice, thanks. Could you summarize which features you did implement? I'm currently using LOS by Micha-Btz, and it's working great,but I might try this out if it's any different...
levone1 said:
Nice, thanks. Could you summarize which features you did implement? I'm currently using LOS by Micha-Btz, and it's working great,but I might try this out if it's any different...
Click to expand...
Click to collapse
Can't say for sure what he changes. Not all his repos are open to public.
This version is the latest updated version of lineage, at the time of build. With all the newest changes from the msm8974 maintainers to get a working Android 7.1.2 on this device. The only extra difference is that I included the smartcard API, so u could use NFC pay with a compatibele sim card.
Hazou said:
Unofficial LineageOS 14.1 for Sony Z1 Compact
Click to expand...
Click to collapse
Which kernel does this ROM use? I can't find a repository at your GitHub
Might be a good idea to link to these sources from OP as public sources are required by GPL.
Btw, this information seems to be wrong
Hazou said:
Downloads
Latest-Rom: lineage-11-20170227-UNOFFICIAL-smi.zip
Click to expand...
Click to collapse
hahnjo said:
Which kernel does this ROM use? I can't find a repository at your GitHub
Might be a good idea to link to these sources from OP as public sources are required by GPL.
Btw, this information seems to be wrong
Click to expand...
Click to collapse
Thx for sharing. Will add them right away. They are indeed not on mine or lineage GitHub. The kernel source is on another GitHub. Will add a local_manifests to the message.
Thx. Works great so far.
My findings:
- original Sony camera app has that hw overlay issue.
- automatic brightness seems to be calibrated to bright
- wlan works smoothly (current aicp has has issues with that)
Not tested Bluetooth yet
Regards
Update:
[2] lineage-14.1-20170721-UNOFFICIAL-amami.zip
Fixes:
Audio_effect fix
A tiny bit better battery life
Fix nightly reboot when charging
Thermal improvements in config
LineageOS changes
Known bugs:
HW overlay needs to be disabled for some full screen video applications
Bluetooth may not work as expected
Reboot to recovery doesn't always work
Needs a compatible recovery to install
Camera may not work 100%
Will never pass full CTS test?
Wifi starts without data connection after reboot
NFC HCE will maybe never be supported, used for android pay
Great firmware!
Problems with lineage-14.1-20170721-UNOFFICIAL-amami.zip
- I still get nightly (while recharging) and some times random reboots
- HW Overlay with Camera
I didnt have any other issues yet
@Hazou thanks for your work! This device still can work well and thanks for support LOS!
Pardon, is it possible to have this feature enabled to receive mms when data is disabled? It can be much of annoyance and inconvenience to have data always be turned on for those with limited data or having to turn data on and of manually just to receive mms
https://review.lineageos.org/#/c/172853/ I can beta test a patch if need, very useful feature. This device deserves a good maintainer like you!
Thanks again sir for attention!
echo124 said:
@Hazou thanks for your work! This device still can work well and thanks for support LOS!
Pardon, is it possible to have this feature enabled to receive mms when data is disabled? It can be much of annoyance and inconvenience to have data always be turned on for those with limited data or having to turn data on and of manually just to receive mms
https://review.lineageos.org/#/c/172853/ I can beta test a patch if need, very useful feature. This device deserves a good maintainer like you!
Thanks again sir for attention!
Click to expand...
Click to collapse
Thank you, But I am not alone Doing this stuff with many others
And yes, we could implement this, than u need to test it, will have a look at it for next update
Hazou said:
Thank you, But I am not alone Doing this stuff with many others
And yes, we could implement this, than u need to test it, will have a look at it for next update
Click to expand...
Click to collapse
Great, will test and thans much to all developers for their time and awesome work! Thanks for this very much!
is the gps working?
- GPS works
- HWOverlay needs to be disabled for Cam or Youtube
- Nightly reboots if the phone is charging over night - even with 21.07.2017 version
Hopefully the team could fix it. Great work so far
Frash said:
- GPS works
- HWOverlay needs to be disabled for Cam or Youtube
- Nightly reboots if the phone is charging over night - even with 21.07.2017 version
Hopefully the team could fix it. Great work so far
Click to expand...
Click to collapse
Yup, we are working on them. Just takes a lot off time to debug and find the issue. Also it's holiday season; sun, beach, party
New version 8-10
Changelog:
3AM bug solved
Touch firmware update (changed to stock amami)
Time correctly set at boot
Update in media codecs/profiles
BLE peripheral mode enabled
Network type change and search should be fixed
Thanks for the update!
Thanks for the update, Hazou!
Unfortunately, changing of network operator does not work with my 2 SIM cards.
I can change the network type and search for network operators, but changing the network operator is not possible.
I have tested various ROMs (AICP, Lineage - yours and Micha-Btz - and Paranoidandroid, v6.03).
Only with the stock Rom and with Paranoidandroid I can change the network operator.
The problem seems related to accessing the SIM card (at least my SIM cards). When the Z1C can read the contacts stored on a SIM card, I can also change the network operator.
Can you change the network operator without problem?
Hi Hazou,
there also seems to be a problem with the telephone function if you toggle the loudspeaker or the mute button during a call.
Once you click mute and enable the mic again, it will stay muted... Same problem seems with the loudspeaker button from time to time.
Would be great if this could be fixed.
Good work! It is really appreciated!
Hi Hazou,
I have also a problem with telephone calls. The microphone seems always to be muted.
When I use Google Duo or WhatsApp Calls if works flawlessly.
The reboot bug while charging is also still existant.
Bisides that: Nice work, thanks for that.
Android Open Source illusion Project
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
"AOSiP stands for Android Open Source illusion Project. We are an AOSP based custom ROM, twisted with the latest features from all over the Android development community. Quality and stability is our first priority as we are dedicated to bringing you the best Android has to offer.
AOSiP brings you the most wanted features, while keeping speed and stability our top priority.
AOSiP features multiple customization options, so your phone can look the way you want it."
Known issues:
- AOSiP ten is not officially released yet. There are missing features!
- Display > lockscreen > advanced settings (this wont to do anything)
- Instagram video recording (You will sound like a robot)
- Wi-Fi display reboots the phone
- Green pictures when using the stock camera/ Whatsapp in lowlight (this is related to YUV processing). Use provided gcam instead.
- Report unknown bugs with logs please!
Instructions :
Clean flash:
- Flash latest Pie ROM by Xiaomi (10.0.13.0). You may use option to retain userdata.
- Use fastboot to boot to latest TWRP.
- Falsh the TWRP installer zip and Force-encryption-disabler zip
- Reboot to TWRP
- Flash the ROM zip
- Flash TWRP installer
- Got to Reboot --> Change boot slot (if on A: A --> B or if on B: B --> A)
- Reboot to recovery
- (Optional, but recommended) Flash GAPPS linked below (other GAPPS for Android 10 may work too)
- (Optional) Flash Magisk (>v20.1!!!!)
- Reboot and wait, will take longer than normal reboot!
Dirty flash (upgrade from existing AOSiP 9 install):
- Reboot to TWRP
- Factory reset in TWRP. No need to wipe userdata! (Skip if you are on ten already)
- Flash ROM zip
- Flash TWRP installer
- Got to Reboot --> Change boot slot (if on A: A --> B or if on B: B --> A)
- Reboot to recovery
- (Optional, but recommended) Flash GAPPS linked below (other GAPPS for Android 10 may work too)
- (Optional) Flash Magisk (>v20.1!!!!)
- Reboot and wait, will take longer than normal reboot!
Note: It is strongly advised to make a backup before upgrading!
Downloads :
Download from Sourceforge
Open GApps Note: OpenGAPPS for ten now officially out, so link changed. Nano package is still recommended!
Recommended Gcam
Kernel Source
Device Tree
Vendor Tree
Props to all the guys from daisy-development-q and especially Lyceris-chan!
Have fun!
XDA:DevDB Information
[10.0][STABLE] AOSiP Quiche beta, ROM for the Xiaomi Mi A2 Lite
Contributors
opal06
Lyceris-chan
Tunasahinn
acras01
pawelik001
Offain/33bca
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-11-27
Last Updated 2019-11-27
Thank you! Respect mate
Edit:
PS. With gapps you reccomend. Can i use Bit... or Open.. ?
gumka77 said:
Thank you! Respect mate
Edit:
PS. With gapps you reccomend. Can i use Bit... or Open.. ?
Click to expand...
Click to collapse
I used the OpenGAPPS from test folder I linked in the OP. Bit... might work, but no guarantee. Just try them and report back, so maybe other users can learn from your experiences.
Note: Updated my main phone from AOSiP Pie to Ten and had some wierd issues. Factory resetted in TWRP and now everything working. So making a backup and factory reset before updating is recommended
When viperos q?
Thanks you , I see your sources is stable thanks for upgrade aosip
opal06 said:
Android Open Source illusion Project
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
"AOSiP stands for Android Open Source illusion Project. We are an AOSP based custom ROM, twisted with the latest features from all over the Android development community. Quality and stability is our first priority as we are dedicated to bringing you the best Android has to offer.
AOSiP brings you the most wanted features, while keeping speed and stability our top priority.
AOSiP features multiple customization options, so your phone can look the way you want it."
Known issues:
- AOSiP ten is not officially released yet. There are missing features!
- Device side should be fine, but please report all bugs here with logs!
Instructions :
Follow guide by davidrocher: https://github.com/tkchn/daisyinstall
This works for Android 10 too! Please use correct version of OpenGAPPS.
Note: It is strongly advised to make a backup before upgrading and performing a factory reset in TWRP.
Downloads :
Download from Sourceforge
Open GApps
Kernel Source
Device Tree
Props to all the guys from daisy-development-q and especially acras1!
Have fun!
XDA:DevDB Information
[10.0][STABLE] AOSiP Quiche beta, ROM for the Xiaomi Mi A2 Lite
Contributors
opal06
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-11-27
Last Updated 2019-11-27
Click to expand...
Click to collapse
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify, usb connection to pc works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
schmidt_here said:
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
Click to expand...
Click to collapse
See if this works for you:
View attachment Clock_v1.0.0.zip
Thanks for the rom, what base is needed?, is November security patch?
Txatxiquesi said:
Thanks for the rom, what base is needed?, is November security patch?
Click to expand...
Click to collapse
yes, november
i don't remember wich version it was, i think 10.0.9. Try 10.0.13 and then post if it works
ps: i installed omniclock from playstore - it works
Fingeprint swipe doesn't work
opal06, kudos for signature spoofing built-in, I can use microG.
Can i update kernel to Celexas kernel v.2. (from devotag) ?
Thank you all very much for your positive feedback.
schmidt_here said:
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify, usb connection to pc works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
Click to expand...
Click to collapse
As for the missing clock, I did not notice it during testing, but you are obviously right. For a stock feeling you can download the Clock app by Google, but there are many other good alternatives.
AOSiP updater is not working because I did not update the OTA file. AOSiP ten is still beta from ROM source side, so I won't enable OTA until it's official from their side.
Txatxiquesi said:
Thanks for the rom, what base is needed?, is November security patch?
Click to expand...
Click to collapse
As base any pie base should work, but latest is best.
schmidt_here said:
yes, november
i don't remember wich version it was, i think 10.0.9. Try 10.0.13 and then post if it works
ps: i installed omniclock from playstore - it works
Fingeprint swipe doesn't work
Click to expand...
Click to collapse
Have you enabled fingerprint swipe in Settings --> System --> Gestures? For me it works fine
gumka77 said:
Can i update kernel to Celexas kernel v.2. (from devotag) ?
Click to expand...
Click to collapse
Probably, just try and report. If something goes wrong, go to TWRP and flash ROM again without wiping data. You won't loose any settings or data.
Plis build with nitrogen kernel
test
opal06 said:
Have you enabled fingerprint swipe in Settings --> System --> Gestures? For me it works fine
Click to expand...
Click to collapse
Yes, it's enabled. It doesn't disturb me, maybe i've to make a fresh install and take another version base.
Yesterday i had an issue, i couldn't download from play store until i deactivated and reactivated the app. Also i couldn't install apk's downloaded manualy from website.
Maybe it's a unique incident
schmidt_here said:
Also i couldn't install apk's downloaded manualy from website.
Click to expand...
Click to collapse
I had a similar issue trying to install apps with Amaze file manager. I had no problem installing apps with the built-in file manager and also with F file manager from f-droid, in my case it was obviously an incompatibility of Amaze with 10. I'm on 10.0.9 base btw. Also I was able to delete system apps with Amaze and magisk 19.3 but not with 20.1. And I can't uninstall Whatsapp no matter what, the installer just quits so I must do it with adb uninstall.
celrau said:
I had a similar issue trying to install apps with Amaze file manager. I had no problem installing apps with the built-in file manager and also with F file manager from f-droid, in my case it was obviously an incompatibility of Amaze with 10. I'm on 10.0.9 base btw. Also I was able to delete system apps with Amaze and magisk 19.3 but not with 20.1. And I can't uninstall Whatsapp no matter what, the installer just quits so I must do it with adb uninstall.
Click to expand...
Click to collapse
That's normal behavior for magisk 20.1 because the system mount point had been changed from /system to / so most root using apps don't know how to use it. Besides that you can use the system debloater magisk module and that should work just fine.
lacia-chan said:
That's normal behavior for magisk 20.1 because the system mount point had been changed from /system to / so most root using apps don't know how to use it. Besides that you can use the system debloater magisk module and that should work just fine.
Click to expand...
Click to collapse
I just did some reading on this, you are right
Flashing Nitrogen R2 kernel results in bootloop with this rom. R1 works fine. Any fix?
good job
I'm using your rom for 1-2 days now Looks like every features work really well to me. I'l report back later if I see anything. Thanks OP