Develop Bugs

[ROM] [6.0.x] [BETA] Unofficial CyanogenMod 13.0 Nightly Builds (KIW-L24 / L22 / L21)

CyanogenMod 13.0 is a free, community built, aftermarket firmware distribution of Android 6.0.x (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Note: This thread is not about:
- Other devices!
- General Honor 5X stuff (Unlocking, Emui, going back to Stock, Updating Stock...)
- Aliens, UFOs, ...
-> Generally: ANYTHING not specifically about CyanogenMod 13.0 for Honor 5X
Important Notice:
Code:
As of July 19, an upgrade of the firmware to MM-Firmware is required ([URL="http://forum.xda-developers.com/showpost.php?p=67840582&postcount=1813"]Link to instructions[/URL],
possibly find your firmware update here: [URL="http://forum.xda-developers.com/honor-5x/how-to/repository-honor-5x-file-depot-t3328288"]LINK[/URL] - note: not related to us, thanks @clsA).
If you run a device below the required firmware,
flashing will fail due to checks in the upgrade package! (No, you shouldn't remove the checks!)
In that case please use a build of July 18 or below. (Link: [URL="https://www.androidfilehost.com/?w=files&flid=72880"]clsA's repo[/URL])
Please DO NOT complain about this, we are not responsible for non-released firmwares
and other things not directly under our control. Please also DO NOT ask for any support
of firmware update in this thread! Go to Q&A section and create or use an existing thread there!
Preparation
To make sure you can run the builds from July 20 and up, please do the following
(For all commands please copy everything between the quotes not including them! All commands require to press [ENTER] to execute)
1) Open the terminal app or connect via computer and type "adb shell"
2) Type "su"
3) Type (or copy)
strings /dev/block/platform/soc.0/7824900.sdhci/by-name/tz | sed 's/QC_IMAGE_VERSION_STRING=//p;d'
4) Compare the output to:
TZ.BF.3.0.C3-00025
5) Are they equal? Go on with the instructions and use a newer build
They are different? -> Go with build of July 18
Instructions
First time flashing CyanogenMod 13.0 on your device, or coming from another ROM?
1) Read this post completely! Make sure you are aware of the issues!
2) Download the zip(s).
3) Install a compatible Recovery (e.g. TWRP (Link))
4) Perform a NANDroid backup of your current ROM (Optional)
5) Wipe data & cache partitions of your device (required when coming from stock!).
6) Flash CyanogenMod.
7) Optional: Install the Google Apps addon package. (Pay attention to the note in "Download links"!)
Changelog
Device tree
Kernel tree
Generic CM tree
Broken Features / Known Issues
camera does not support HDR photos - no need to try other camera apps, it's disabled completely!
dt2wake doesn't use the proximity sensor to filter bogus d2twake triggers and therefore can turn on too easily in your pocket,
but it DOES work without proximity sensor
Builds older than July 20: fingerprint sensor not implemented! (Do not even ask for it, search the thread!)
smart view case support
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking or ask the same question over and over again.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
If you have a hard reboot (to the vendor boot logo, not the CM boot logo), use adb or any other file explorer tool to pull a copy of
/sys/fs/postore/console-ramoops
after the reboot and provide that.
Note: We will not support any kind of modification on the ROM not done by our sources. If you are running XPosed, Kernel Booster or whatever occurs to you, we won't support you in any way. The problem will in every case be treated as the additional softwares' fault (because often it is!)
Download Links
CyanogenMod: ROM @ http://download.crpalmer.org/nightlies/kiwi-cm-13.0
Google apps addon:
(Note: Not required to run the ROM)
We are using Open GApps (Link) Arm64 version. (make sure to use 64bit when using other packages), others might also be working
Note: In case you want to use any gapps, YOU MUST install the right gapps the first time that you flash a marshmallow ROM. Do not boot with an older gapps or without one and then try to install it later.
Note: If you install a package which replaces the default dialer (mostly "Stock Gapps") you have to go to Settings->Apps->Gear-Icon and set the new dialer as a default telephony app to prevent force closing of apps
XDA:DevDB Information
CyanogenMod 13.0 Builds, ROM for the Honor 5X
Contributors
crpalmer, BadDaemon
Source Code: https://github.com/CyanogenMod/android_kernel_huawei_kiwi
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Beta
Created 2016-03-25
Last Updated 2016-07-27

Reserved
Known Issues:
Moved to first post (above).
Other Issues:
If I don't list it as a known issue, it means I do not think it's a problem because I have never encountered whatever you think is broken.
If you post "_____ is broken", I will ignore it unless you:
* Provide appropriate logs
* Provide clear instructions to reproduce the problem or a statement that it just randomly happens
* Have the problem on a "clean" install (see below).
Getting Logs:
You can use SysLog by Tortel from the play store to get logcats (Main Log), dmesg (Kernel log) and Radio Logs. These will capture the log after the fact. You can also get the logs via adb:
PHP:
adb logcat -v time -d > logcat.txt
adb logcat -v time -b radio -d > radio.txt
adb shell dmesg > dmesg.txt
You can use either a file explorer app that allows root access or adb to get the last kernel log. Via adb you would plug your phone into a computer that has adb access to it and run
PHP:
adb root
adb pull /sys/fs/postore/console-ramoops
Appropriate Logs:
If you have a hard reboot (to the vendor boot logo, not the CM boot logo), the only log that will contain useful information if the last kernel log. All other logs are cleared on a reboot and will be useless.
If you have any issue with telephony, wifi, bluetooth or anything related to externally communicating via your phone, please provide all 3 logs (logcat, radio log and kernel log).
If you submit radio logs, please do so via a PM as the logs may contain phone numbers and other information such as your IMEI.
Clean Install:
If you have a reproducible problem:
* Backup your current install in twrp (so you can go back to it, if you want, when you're done)
* Factory reset
* Wipe system
* Install CM, install GApps (and not one that replaces system apps like the camera, especially if you think the camera is broken!)
* Do not install anything else, do not restore anything else via Google, Titanium Backup, etc.
* DO NOT INSTALL Xposed
* Install the apps that you need to reproduce the problem
* Collect logs
* Restore your backup
If the problem is not reproducible, you still need to run on a clean install and wait for it to happen. In this case do:
* Backup your current install in twrp (so you can go back to it, if you want, when you're done)
* Factory reset
* Wipe system
* Install CM, install GApps (and not one that replaces system apps like the camera, especially if you think the camera is broken!)
* Do not install anything else, do not restore anything else via Google, Titanium Backup, etc.
* Install the apps that you need on your phone via Play Store and do not restore data from anywhere or install any other tweaks, scripts.
* DO NOT INSTALL Xposed
* Wait for it to happen
* Collect logs
* Restore your backup
Note: We will not support any kind of modification on the ROM not done by our sources. If you are running XPosed, Kernel Booster or whatever occurs to you, we won't support you in any way. The problem will in every case be treated as the additional softwares' fault (because often it is!)

Reserved

So happy to see marshmallow come to this amazing device. Many thanks to all contributing

crpalmer said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Click to expand...
Click to collapse
Thanks @crpalmer. You might want to change above to 6.0.x
Sent from my A0001 using Tapatalk

Keep getting "App not responding" every few minutes. Not sure if I'm the only one.

Going to flash it right now; fingers crossed.
Thanks for your work @crpalmer

InfamousGam3r said:
Keep getting "App not responding" every few minutes. Not sure if I'm the only one.
Click to expand...
Click to collapse
Same Issue, Facebook and Messenger.

Damn bro... You're amazing.... I would love to taste marshmallow on this device but i think I'll refrain until some important bugs are fixed.... Thnx a lot for your hard work
Sent from my KIW-L21 using Tapatalk

Elmerdus said:
Same Issue, Facebook and Messenger.
Click to expand...
Click to collapse
Yep, exact same problem[emoji14]Facebook and Messenger seem to be giving that error on cm13 3/24/16
Sent from my KIW-L24 using Tapatalk

Amazing work this is the first time I'm actually using marshmallow . The rom feels a bit slower than the lolipop version, but hey having shower in the acid feels better than using the stock rom.
right now the battery indication seem to be stuck at 100%, need to reboot to check if it is actually valid.
Battery works now I have to allow all this user permissions
---------- Post added at 09:31 AM ---------- Previous post was at 09:23 AM ----------
InfamousGam3r said:
Yep, exact same problem[emoji14]Facebook and Messenger seem to be giving that error on cm13 3/24/16
Sent from my KIW-L24 using Tapatalk
Click to expand...
Click to collapse
mine works pretty well for messenger and.... restoring facebook..... yup works perfectly; I'm using custom booster so maybe?

nemexs said:
Amazing work this is the first time I'm actually using marshmallow . The rom feels a bit slower than the lolipop version, but hey having shower in the acid feels better than using the stock rom.
right now the battery indication seem to be stuck at 100%, need to reboot to check if it is actually valid.
Battery works now I have to allow all this user permissions
---------- Post added at 09:31 AM ---------- Previous post was at 09:23 AM ----------
mine works pretty well for messenger and.... restoring facebook..... yup works perfectly; I'm using custom booster so maybe?
Click to expand...
Click to collapse
What do you mean "custom booster"? I was coming from CM12.1 with GApps Arm64 5.1 Minimal, updated to CM13 (3/24/16) and GApps Arm64 6.0 Micro

InfamousGam3r said:
What do you mean "custom booster"? I was coming from CM12.1 with GApps Arm64 5.1 Minimal, updated to CM13 (3/24/16) and GApps Arm64 6.0 Micro
Click to expand...
Click to collapse
skynet project
http://forum.xda-developers.com/android/software-hacking/android-l-booster-1-soon-t3030796
The apps that didn't run properly from the titanium I reinstalled them.
For developer: Battery indicator is bugging out again, rebooting........ same problem, removed the gravity box [MM]; busybox has a problem too. Ok Google seems to crash every time I reboot.
Workaround the batter indicator bug: if you are plugged to a power charger the indicator works perfectly.
Update: busybox works with graphics just crashing, but app working well.

nemexs said:
skynet project
http://forum.xda-developers.com/android/software-hacking/android-l-booster-1-soon-t3030796
The apps that didn't run properly from the titanium I reinstalled them.
For developer: Battery indicator is bugging out again, rebooting........ same problem, removed the gravity box [MM]; busybox has a problem too. Ok Google seems to crash every time I reboot.
Workaround the batter indicator bug: if you are plugged to a power charger the indicator works perfectly.
Click to expand...
Click to collapse
Going to try and use that custom booster you linked me to, reinstalling CM13 again (reverted back to CM12 earlier because of a few issues). Doing it all fresh this time, just hate having to re-arrange my stuff haha.
Thanks,

@crpalmer , call recording works on cm13 .
Doze is working fine .
Major bugs are battery status and all CPUs online .
If you could fix this , cm13 comes to use as a daily drive .

Still getting "Unfortunately, *APP* has stopped." on CM13 3/24/16. Clean install. CM13 > GApps Arm64 6.0 nano

InfamousGam3r said:
Still getting "Unfortunately, *APP* has stopped." on CM13 3/24/16. Clean install. CM13 > GApps Arm64 6.0 nano
Click to expand...
Click to collapse
Are you l24 or l21? :/
http://opengapps.org/ This one? arm64 6.0 nano works fine for me

nemexs said:
Are you l24 or l21? :/
http://opengapps.org/ This one? arm64 6.0 nano works fine for me
Click to expand...
Click to collapse
KIW-L24
and... OpenGapps ARM64 6.0 nano.

InfamousGam3r said:
KIW-L24
and... OpenGapps ARM64 6.0 nano.
Click to expand...
Click to collapse
Maybe l24 problem? I'm using it on l21 and the only thing that's bugging is "OK Google." Have you tried redownloading it?

[ROM][6.0.x][UNOFFICIAL][Z010D] CyanogenMod 13.0 [20161226]

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Install instructions:
Reboot into recovery (latest TWRP recommended).
Wipe Data, System and Cache if it's a fresh install.
No wipes required if you're updating from a previous version of CM 13.0 (Wipe Cache and Dalvik Cache recommended).
Flash ROM + Gapps.
Reboot.
Read post 2 before reporting bugs.
Changelogs.
BUILD - 20161127
*make incall volume higher
*reduce min cpu
*audio fx still not fix
* asus pixel cam still not fix
*BFQ as default sched
*add core control
BUILD - 20161129
*New Kernel
*Fixed DT2W And OffScreen Gestures
BUILD - 20161201
*Kernel Updates
*Fixed Pixel Master Camera
*Fixed AudioFX
BUILD - 20161201
*Upstream Changes.
BUILD - 20161201
*Upstream Changes.
*Kernel Compiled With UBERTC.
BUILD - 20161201
*Upstream Changes And Device Related Changes.
Download links
Rom - https://www.androidfilehost.com/?fid=673368273298918967
Gapps - opengapps.org
Note - This isn't my work main developer of this project is audahadi so leave a like and support.
DONATION NOT NECESSARY BUT IT'LL HELP TO PAY SERVER BILLS.
Donate via PayPal - [email protected]
Credits
audahadi
luk1337
luca020400
Source
Device Tree - https://github.com/audahadi/android_device_asus_Z010D.git
Common - https://github.com/audahadi/android_device_asus_qcom_common.git
Vendor - https://github.com/audahadi/android_vendor_asus_Z010D.git
XDA:DevDB Information
CyanogenMod 13.0, ROM for the Asus ZenFone 2
Contributors
ShadowReaper1, audahadi, luk1337, luca020400
Source Code: https://github.com/kernel-hut/android_kernel_asus_Z010D.git
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: Marshmallow Bootloader/Modem
Based On: CyanogenMod
Version Information
Status: Stable
Created 2016-11-24
Last Updated 2016-12-26

Reserved
SOME RULES
PLEASE USE GIVEN SECTIONS ABOVE TO SORT EVERYTHING YOU HAVE IN YOUR MIND FOR EXAMPLE IF YOU WANT TO REPORT A BUG USE BUG REPORT SECTION ANY BUG REPORTS GIVEN IN THE COMMENT SECTIONS WILL BE IGNORED SAME GOES FOR EVERYTHING.
First Read The OP And Use The Search Box To Find Your Issue There's A Chance That Somebody Already Might Have Faced The Same Issue Before And Fixed It.
Bug reports:
Explain how to reproduce the bug and attach logcat and dmesg (if you had a random reboot, also attach last_kmsg). If you don't know how to get those, you can use this app. Please, do not report bugs if you use any kind of mods (like xposed) or third party kernel.
Known bugs:
LED Light May Not Work Properly Sometime.
Off charge doesn't work if your battery dies(switch off when goes to 0%) use recovery mode or fastboot mode to charge your phone for 15-20mins then power it on.
Frequently Asked Questions:
Q) How can I unlock Developer options?
A) Go to Settings > About phone, and press five times on Build number.
Q) How can I enable root access?
A) Go to Settings > Developer options > Root access, and enable it for apps, adb or both.
Q) How can I set '3G only' network mode?
A) Open dialer, dial *#*#4636#*#* , open first option "Phone Information", there you can set your preferred network mode.
Q) Why there's a small delay when I wake up the phone?
A) Go to Settings > Display & lights and disable prevent accidental wake-up.
Q) Why is wifi always on in battery stats, even when it was disabled?
A) Go to Settings > Location, press on the 3 dots (top right) > scanning > disable wifi.
Q) How do I update Gapps? (Also useful if you have Gapps related problems).
A) Reboot into recovery. Wipe System, Cache and Dalvik Cache. Install ROM + Gapps. Reboot.

Reserved
Marshmallow Bootloader/Modem
If you are using stock lollipop rom then you must flash any stock marshmallow rom before upgrading to CyanogenMod else it won't boot.

it said the some 3rd camera apps may not work but other do right? and is the usb otg is ???? still working ???

How's the vpn on this rom?

phericaaaa said:
it said the some 3rd camera apps may not work but other do right? and is the usb otg is ???? still working ???
Click to expand...
Click to collapse
Yes Usb Otg Is Working.

sLipamin said:
How's the vpn on this rom?
Click to expand...
Click to collapse
We didn't test any vpn but you can try and revert back here.

Is it working at Zenfone Max with Snapdragon 410?

hitman128 said:
Is it working at Zenfone Max with Snapdragon 410?
Click to expand...
Click to collapse
Yes, it is for Zenfone Max SD 410

ShadowReaper1 said:
We didn't test any vpn but you can try and revert back here.
Click to expand...
Click to collapse
password file fix, pls

This is going to be awesome... so much thank you for the developer for this. do you guys have website so we can help you out by clicking ads... donate will do as well for keeping this on going project

ShadowReaper1 said:
We didn't test any vpn but you can try and revert back here.
Click to expand...
Click to collapse
how about app2sd and init.d support?

Nice job. But, This should be in the development forum. Not the general one.
Sent from my Zenfone 2 using Tapatalk

hi I can't seem to update it with my 5.0.2 ... i searched somewhere it needs a prerequisite wihich si a MM build before flashing to CM 13 MM

khiya said:
hi I can't seem to update it with my 5.0.2 ... i searched somewhere it needs a prerequisite wihich si a MM build before flashing to CM 13 MM
Click to expand...
Click to collapse
M bootloader is a mandatory
Sent from my Z010D using Tapatalk

pls help me
link download have been died pls help me

hatdua93 said:
password file fix, pls
Click to expand...
Click to collapse
No need password idk what are you talking about

kenbo111 said:
Nice job. But, This should be in the development forum. Not the general one.
Sent from my Zenfone 2 using Tapatalk
Click to expand...
Click to collapse
Since Zenfone Max Has No Development Forum And It's A Phone From Zenfone 2 Series That's Why We Are Created This Thread In General Forum I Think It Would Be Wrong And Confusing If We Start Posting In Development Forum.

audahadi said:
M bootloader is a mandatory
Sent from my Z010D using Tapatalk
Click to expand...
Click to collapse
thanks... finally working using bootloader from 6.0.1 BETA

khiya said:
This is going to be awesome... so much thank you for the developer for this. do you guys have website so we can help you out by clicking ads... donate will do as well for keeping this on going project
Click to expand...
Click to collapse
Thanks but no thanks if you want you can leave a like

[ROM][P901][UNOFFICIAL] CyanogenMod 13.0 | Android 6.0.1 Marshmallow | 20161211

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Important information:
This thread is for Unofficial CyanogenMod 13.0 builds for v1a3g (SM-P901). The following will not be supported here:
* Custom kernels
* Mods
* Xposed
I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
* Flashed a custom kernel
* Installed or did mods from untrusted sources
* Modified system files
NOTICE:
This ROM may still have some bugs (although minor). Most things work except:
mic
Ok Google
S-Pen works with S-Pen apps (paint, notes, etc.). No popup will appear on removal.
If you find other issues (CM13 issues) please post them. May take a while to fix but they will be worked on.
ALSO - please DO NOT ask about CM14 - it is being looked into - no other info available.
Installation
First time flashing CyanogenMod 13.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash CyanogenMod
Install the Google Apps addon package (Optional)
Reboot
Other issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs! You can use this: https://play.google.com/store/apps/details?id=com.tortel.syslog&hl=en
Downloads
12/11 build
Google Drive: SM-P901-CM13
Mega Drive: SM-P901-CM13
One Drive: SM-P901-CM13
Old Downloads
Changelog:
12/11
Initial Release
Google Apps:
http://opengapps.org/- thanks to the OpenGapps team!
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Source:
Kernel: https://github.com/exynos5420/android_kernel_samsung_exynos5420
Device Tree: https://github.com/exynos5420/android_device_samsung_ha3g
Credits:
@UpInTheAir for his kernel magic and misc fixes
@crpalmer (for picassowifi device and kernel gits)
@eousphoros (for his work on klimtwifi)
@nvertigo67 (for his work on chagallwifi)
@Nexorrr (for his work on chagalllte)
@tincho5588(For testing my builds on device)
Exynos5420 Dev Team (@deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart)

This rom requires the Marshmallow boot loader.

gcrutchr said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Important information:
This thread is for Unofficial CyanogenMod 13.0 builds for v1a3g (SM-P901). The following will not be supported here:
* Custom kernels
* Mods
* Xposed
I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
* Flashed a custom kernel
* Installed or did mods from untrusted sources
* Modified system files
NOTICE:
This ROM may still have some bugs (although minor). Most things work except:
mic
Ok Google
S-Pen works with S-Pen apps (paint, notes, etc.). No popup will appear on removal.
If you find other issues (CM13 issues) please post them. May take a while to fix but they will be worked on.
ALSO - please DO NOT ask about CM14 - it is being looked into - no other info available.
Installation
First time flashing CyanogenMod 13.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash CyanogenMod
Install the Google Apps addon package (Optional)
Reboot
Other issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs! You can use this: https://play.google.com/store/apps/details?id=com.tortel.syslog&hl=en
Downloads
12/11 build
Google Drive: SM-P901-CM13
Mega Drive: SM-P901-CM13
One Drive: SM-P901-CM13
Old Downloads
Changelog:
12/11
Initial Release
Google Apps:
http://opengapps.org/- thanks to the OpenGapps team!
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Source:
Kernel: https://github.com/exynos5420/android_kernel_samsung_exynos5420
Device Tree: https://github.com/exynos5420/android_device_samsung_ha3g
Credits:
@UpInTheAir for his kernel magic and misc fixes
@crpalmer (for picassowifi device and kernel gits)
@eousphoros (for his work on klimtwifi)
@nvertigo67 (for his work on chagallwifi)
@Nexorrr (for his work on chagalllte)
@tincho5588(For testing my builds on device)
Exynos5420 Dev Team (@deadman96385 @[email protected]@[email protected]@[email protected]@thermskin, @javelinanddart)
Click to expand...
Click to collapse
After one day , I found some bugs.
This cm ROM doesn't detect current battery status correctly. I plugged my charger to sm-p901 , unfortunately after 12 hours the battery status represents "50 %".
Second bug is WiFi . I have to select a bandwidth from 1 to 13 manually to connecting into my home wireless router.
Hope you fix this. Thank u so much

mohsenfa01 said:
After one day , I found some bugs.
This cm ROM doesn't detect current battery status correctly. I plugged my charger to sm-p901 , unfortunately after 12 hours the battery status represents "50 %".
Second bug is WiFi . I have to select a bandwidth from 1 to 13 manually to connecting into my home wireless router.
Hope you fix this. Thank u so much
Click to expand...
Click to collapse
Battery level has always been a issue with cyanogen mod (your battery is charging, though) - at least on all the ones I have tried. Do a google search for battery calibration.
Wifi - did you do a data wipe (try that) - also make sure your router is set to auto for band; and finally, in wifi settings, select forget network and try to reconnect.

gcrutchr said:
Battery level has always been a issue with cyanogen mod (your battery is charging, though) - at least on all the ones I have tried. Do a google search for battery calibration.
Wifi - did you do a data wipe (try that) - also make sure your router is set to auto for band; and finally, in wifi settings, select forget network and try to reconnect.
Click to expand...
Click to collapse
There is serious problem with battery, therefore there are so many apps which claim to calibrate battery, which one do you suggest to use?

mohsenfa01 said:
There is serious problem with battery, therefore there are so many apps which claim to calibrate battery, which one do you suggest to use?
Click to expand...
Click to collapse
Never used a battery calibration app - usually wait for green light to come on so I know battery full.
I suggest do a google search for cynogenmod and battery charging issue.

gcrutchr said:
Never used a battery calibration app - usually wait for green light to come on so I know battery full.
I suggest do a google search for cynogenmod and battery charging issue.
Click to expand...
Click to collapse
OK , how about s pen smart text selection?

mohsenfa01 said:
OK , how about s pen smart text selection?
Click to expand...
Click to collapse
If you are looking for the s-pen to work for everything like a Samsung rom, it won't.
As I stated in post #1, the s-pen works with apps that support it.

gcrutchr said:
If you are looking for the s-pen to work for everything like a Samsung rom, it won't.
As I stated in post #1, the s-pen works with apps that support it.
Click to expand...
Click to collapse
Ok, this rom have issue to connecting into wireless routsr with auto band

gcrutchr said:
Battery level has always been a issue with cyanogen mod (your battery is charging, though) - at least on all the ones I have tried. Do a google search for battery calibration.
Wifi - did you do a data wipe (try that) - also make sure your router is set to auto for band; and finally, in wifi settings, select forget network and try to reconnect.
Click to expand...
Click to collapse
I found there is serious WiFi channel issue in all marshmallow devices, just google these words:
Marshmallow WiFi channel
It seams this android version has disability to find WiFi units with channel 13 or 1. What's your opinion ?

mohsenfa01 said:
I found there is serious WiFi channel issue in all marshmallow devices, just google these words:
Marshmallow WiFi channel
It seams this android version has disability to find WiFi units with channel 13 or 1. What's your opinion ?
Click to expand...
Click to collapse
My wifi router (Thailand) has channels 1-13. I have no problem connecting with this rom or any other, including my Galaxy S3 which is on CM, my iPad Pro, my Note 5 and my Note Pro 12.2 (3g).
Did you clear the data before installing rom? Did you clear cache and dalvik cache?
Try downloading WIFI Analyzer on Play Store....maybe it will help.

Modem?
The sm-p901 has LTE, is this rom has it???? or I need to install custom

timmyhoa34 said:
The sm-p901 has LTE, is this rom has it???? or I need to install custom
Click to expand...
Click to collapse
This device should only have 3G.

timmyhoa34 said:
The sm-p901 has LTE, is this rom has it???? or I need to install custom
Click to expand...
Click to collapse
The SM-P901 does not have LTE. It is a 3G device.
There is nothing you can install to get LTE. LTE is part of the modem and the only Note Pro 12.2 device that has it is the P905 series.

Excellent
Thanks for this beautiful 6.0.1 ROM....great boost from stock 5.0.2 which was sluggish...very fast and stable...no issues to complain up to now...really appreciate you guys!!!

MyoMinhtoo said:
Thanks for this beautiful 6.0.1 ROM....great boost from stock 5.0.2 which was sluggish...very fast and stable...no issues to complain up to now...really appreciate you guys!!!
Click to expand...
Click to collapse
You're welcome!

Is it possible to switch from android to another one ? Like Ubuntu or windows 10 ?

mohsenfa01 said:
Is it possible to switch from android to another one ? Like Ubuntu or windows 10 ?
Click to expand...
Click to collapse
Windows 10? No
Linux? I have read about people running linux on an android tablet. Search XDA for the thread. It's under Android Software Development or Android Software and Hacking General.

Thank you.
How can i compile from source code?

e-sh said:
Thank you.
How can i compile from source code?
Click to expand...
Click to collapse
In the 1st post there are links to the source code. You need to set up your computer 1st to build android.
Then you can get the base android source from github and the v1a3g source code from the link in post #1.

[10.0][STABLE] AOSiP Quiche beta

Android Open Source illusion Project
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
"AOSiP stands for Android Open Source illusion Project. We are an AOSP based custom ROM, twisted with the latest features from all over the Android development community. Quality and stability is our first priority as we are dedicated to bringing you the best Android has to offer.
AOSiP brings you the most wanted features, while keeping speed and stability our top priority.
AOSiP features multiple customization options, so your phone can look the way you want it."
Known issues:
- AOSiP ten is not officially released yet. There are missing features!
- Display > lockscreen > advanced settings (this wont to do anything)
- Instagram video recording (You will sound like a robot)
- Wi-Fi display reboots the phone
- Green pictures when using the stock camera/ Whatsapp in lowlight (this is related to YUV processing). Use provided gcam instead.
- Report unknown bugs with logs please!
Instructions :
Clean flash:
- Flash latest Pie ROM by Xiaomi (10.0.13.0). You may use option to retain userdata.
- Use fastboot to boot to latest TWRP.
- Falsh the TWRP installer zip and Force-encryption-disabler zip
- Reboot to TWRP
- Flash the ROM zip
- Flash TWRP installer
- Got to Reboot --> Change boot slot (if on A: A --> B or if on B: B --> A)
- Reboot to recovery
- (Optional, but recommended) Flash GAPPS linked below (other GAPPS for Android 10 may work too)
- (Optional) Flash Magisk (>v20.1!!!!)
- Reboot and wait, will take longer than normal reboot!
Dirty flash (upgrade from existing AOSiP 9 install):
- Reboot to TWRP
- Factory reset in TWRP. No need to wipe userdata! (Skip if you are on ten already)
- Flash ROM zip
- Flash TWRP installer
- Got to Reboot --> Change boot slot (if on A: A --> B or if on B: B --> A)
- Reboot to recovery
- (Optional, but recommended) Flash GAPPS linked below (other GAPPS for Android 10 may work too)
- (Optional) Flash Magisk (>v20.1!!!!)
- Reboot and wait, will take longer than normal reboot!
Note: It is strongly advised to make a backup before upgrading!
Downloads :
Download from Sourceforge
Open GApps Note: OpenGAPPS for ten now officially out, so link changed. Nano package is still recommended!
Recommended Gcam
Kernel Source
Device Tree
Vendor Tree
Props to all the guys from daisy-development-q and especially Lyceris-chan!
Have fun!
XDA:DevDB Information
[10.0][STABLE] AOSiP Quiche beta, ROM for the Xiaomi Mi A2 Lite
Contributors
opal06
Lyceris-chan
Tunasahinn
acras01
pawelik001
Offain/33bca
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-11-27
Last Updated 2019-11-27

Thank you! Respect mate
Edit:
PS. With gapps you reccomend. Can i use Bit... or Open.. ?

gumka77 said:
Thank you! Respect mate
Edit:
PS. With gapps you reccomend. Can i use Bit... or Open.. ?
Click to expand...
Click to collapse
I used the OpenGAPPS from test folder I linked in the OP. Bit... might work, but no guarantee. Just try them and report back, so maybe other users can learn from your experiences.
Note: Updated my main phone from AOSiP Pie to Ten and had some wierd issues. Factory resetted in TWRP and now everything working. So making a backup and factory reset before updating is recommended

When viperos q?

Thanks you , I see your sources is stable thanks for upgrade aosip
opal06 said:
Android Open Source illusion Project
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
"AOSiP stands for Android Open Source illusion Project. We are an AOSP based custom ROM, twisted with the latest features from all over the Android development community. Quality and stability is our first priority as we are dedicated to bringing you the best Android has to offer.
AOSiP brings you the most wanted features, while keeping speed and stability our top priority.
AOSiP features multiple customization options, so your phone can look the way you want it."
Known issues:
- AOSiP ten is not officially released yet. There are missing features!
- Device side should be fine, but please report all bugs here with logs!
Instructions :
Follow guide by davidrocher: https://github.com/tkchn/daisyinstall
This works for Android 10 too! Please use correct version of OpenGAPPS.
Note: It is strongly advised to make a backup before upgrading and performing a factory reset in TWRP.
Downloads :
Download from Sourceforge
Open GApps
Kernel Source
Device Tree
Props to all the guys from daisy-development-q and especially acras1!
Have fun!
XDA:DevDB Information
[10.0][STABLE] AOSiP Quiche beta, ROM for the Xiaomi Mi A2 Lite
Contributors
opal06
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-11-27
Last Updated 2019-11-27
Click to expand...
Click to collapse

i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify, usb connection to pc works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)

schmidt_here said:
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
Click to expand...
Click to collapse
See if this works for you:
View attachment Clock_v1.0.0.zip

Thanks for the rom, what base is needed?, is November security patch?

Txatxiquesi said:
Thanks for the rom, what base is needed?, is November security patch?
Click to expand...
Click to collapse
yes, november
i don't remember wich version it was, i think 10.0.9. Try 10.0.13 and then post if it works
ps: i installed omniclock from playstore - it works
Fingeprint swipe doesn't work

opal06, kudos for signature spoofing built-in, I can use microG.

Can i update kernel to Celexas kernel v.2. (from devotag) ?

Thank you all very much for your positive feedback.
schmidt_here said:
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify, usb connection to pc works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
Click to expand...
Click to collapse
As for the missing clock, I did not notice it during testing, but you are obviously right. For a stock feeling you can download the Clock app by Google, but there are many other good alternatives.
AOSiP updater is not working because I did not update the OTA file. AOSiP ten is still beta from ROM source side, so I won't enable OTA until it's official from their side.
Txatxiquesi said:
Thanks for the rom, what base is needed?, is November security patch?
Click to expand...
Click to collapse
As base any pie base should work, but latest is best.
schmidt_here said:
yes, november
i don't remember wich version it was, i think 10.0.9. Try 10.0.13 and then post if it works
ps: i installed omniclock from playstore - it works
Fingeprint swipe doesn't work
Click to expand...
Click to collapse
Have you enabled fingerprint swipe in Settings --> System --> Gestures? For me it works fine
gumka77 said:
Can i update kernel to Celexas kernel v.2. (from devotag) ?
Click to expand...
Click to collapse
Probably, just try and report. If something goes wrong, go to TWRP and flash ROM again without wiping data. You won't loose any settings or data.

Plis build with nitrogen kernel

test
opal06 said:
Have you enabled fingerprint swipe in Settings --> System --> Gestures? For me it works fine
Click to expand...
Click to collapse
Yes, it's enabled. It doesn't disturb me, maybe i've to make a fresh install and take another version base.
Yesterday i had an issue, i couldn't download from play store until i deactivated and reactivated the app. Also i couldn't install apk's downloaded manualy from website.
Maybe it's a unique incident

schmidt_here said:
Also i couldn't install apk's downloaded manualy from website.
Click to expand...
Click to collapse
I had a similar issue trying to install apps with Amaze file manager. I had no problem installing apps with the built-in file manager and also with F file manager from f-droid, in my case it was obviously an incompatibility of Amaze with 10. I'm on 10.0.9 base btw. Also I was able to delete system apps with Amaze and magisk 19.3 but not with 20.1. And I can't uninstall Whatsapp no matter what, the installer just quits so I must do it with adb uninstall.

celrau said:
I had a similar issue trying to install apps with Amaze file manager. I had no problem installing apps with the built-in file manager and also with F file manager from f-droid, in my case it was obviously an incompatibility of Amaze with 10. I'm on 10.0.9 base btw. Also I was able to delete system apps with Amaze and magisk 19.3 but not with 20.1. And I can't uninstall Whatsapp no matter what, the installer just quits so I must do it with adb uninstall.
Click to expand...
Click to collapse
That's normal behavior for magisk 20.1 because the system mount point had been changed from /system to / so most root using apps don't know how to use it. Besides that you can use the system debloater magisk module and that should work just fine.

lacia-chan said:
That's normal behavior for magisk 20.1 because the system mount point had been changed from /system to / so most root using apps don't know how to use it. Besides that you can use the system debloater magisk module and that should work just fine.
Click to expand...
Click to collapse
I just did some reading on this, you are right

Flashing Nitrogen R2 kernel results in bootloop with this rom. R1 works fine. Any fix?

good job

I'm using your rom for 1-2 days now Looks like every features work really well to me. I'l report back later if I see anything. Thanks OP

[ROM][UNOFFICIAL] LineageOS 17.1 for Nexus 5 (hammerhead) [DISCONTINUED]

LineageOS 17.1 is a free, community built, aftermarket firmware distribution of Android 10.0 (Q), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
The source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Known bugs:
Fantom icons in launcher after installing/updating apps. Fixed since 2020-03-18 build.
Expanded desktop doesn't work. LineageOS team planning to remove this feature entirely. This feature was removed in latest builds.
For some users phone won't boot after installing Magisk. Right now there is no solution. Use rom without Magisk. Fixed since 2020-02-22 build. Credits to @Sashko98 for help!
Screen timeout does not work if the Screen lock is set to none. Fixed since 2020-05-31 build.
Random drops of the bluetooth connection. Fixed since 2020-06-13 build.
Screen mirroring via slimport HDMI adapter doesn't work.
PMF aka 802.11w doesn't work.
Downloads:
ROM: https://sourceforge.net/projects/hammerhead-lineageos/files/17.1/
GAPPS: https://opengapps.org/?arch=arm&api=10.0&variant=pico
Credits:
Many thanks to the LineageOS team and all the contributors out there in the community
Contributors:
@z3DD3r, @EnesSastim, @Sashko98, @razorloves, esa-n, jprimero15 and others
Source Code:
Device tree: https://github.com/z3DD3r/android_device_lge_hammerhead/tree/lineage-17.1
Kernel tree: https://github.com/z3DD3r/android_kernel_lge_hammerhead/tree/lineage-17.1
Vendor tree: https://github.com/z3DD3r/android_vendor_lge/tree/lineage-17.1
Android version: 10.0.0 (Q)
Kernel version: Linux 3.4.113
SELinux: Enforcing
Status: Stable
Created 2020-01-23
Last Updated 2020-06-23

GAPPS Installation
To install GAPPS you should increase the /system partition size
This can be done for example with TWRP HH.R
[RECOVERY][UNOFFICIAL] TWRP HH for Nexus 5 (hammerhead)
TWRP HH for Nexus 5 About: TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with...
forum.xda-developers.com
Also LineageOS Team have recommendations about GAPPS
Here are the most important two copied from LineageOS WiKi:
If you opt to use Open GApps, they offer a variety of sizes of packages that include and overwrite different apps. We only recommend package sizes up through nano. If you use a larger package, we can not guarantee that everything will function on your device, as in many of these cases our included apps are overwritten in favor of the Google App equivalents.
Google apps should be installed via recovery immediately after installing LineageOS. If you reboot into LineageOS before installing Google apps, you must factory reset and then install them, otherwise expect crashes.

reserved

Thanks for your work.

I'm running 17.1-20200122. Works amazingly well so far. No bugs detected.

Thank you @z3DD3r for your amazing work for Hammy

Hardware Macaddress
Thanks for this amazing rom which is super fast. I am unable to connect to my home WiFi with static ip.
My configuration is - Nexus 5 32 GB, Rom 24 Jan, Open Gapps Nano 23 Jan, TWRP system repartioned to 2GB..
Unable to disable Mac randamnization....can’t find any toggle.hence unable to use hardware MAC address.
Kindly advise a fix. Thanks in advance.

zheega said:
I'm running 17.1-20200122. Works amazingly well so far. No bugs detected.
Click to expand...
Click to collapse
How is the battery-drain for you? I tried an earlier version and that wasn't nice regarding battery. Almost half the time compared to the 16.0.

I've just run a single charge on the last build, but seems good so far. Better than 16.0 I would say.

Encryption working flawlessly !!!
Beta TWRP decrypts DATA in recovery !!! (carefully read instructions and posts.)
Excellent work, everybody.

anilspice said:
Thanks for this amazing rom which is super fast. I am unable to connect to my home WiFi with static ip.
My configuration is - Nexus 5 32 GB, Rom 24 Jan, Open Gapps Nano 23 Jan, TWRP system repartioned to 2GB..
Unable to disable Mac randamnization....can’t find any toggle.hence unable to use hardware MAC address.
Kindly advise a fix. Thanks in advance.
Click to expand...
Click to collapse
Static ip works for me and I dont have mac randomization.
I dirty flashed from lineage-16.0-20191225 to 17.1-20200124 and wiped cached/davik. Everything seems fine (old apps, lte, camera, wifi). Only thing I miss is homescreen icon grid is max 5x5, I liked 5x7. Nice work!

I'm trying to flash the rom to my nexus5 with twrp. The installation went ok, but when i boot, it seems to stuck at the loading screen (blue ball going from right to left). Am I doing something wrong?

anilspice said:
Thanks for this amazing rom which is super fast. I am unable to connect to my home WiFi with static ip.
My configuration is - Nexus 5 32 GB, Rom 24 Jan, Open Gapps Nano 23 Jan, TWRP system repartioned to 2GB..
Unable to disable Mac randamnization....can’t find any toggle.hence unable to use hardware MAC address.
Kindly advise a fix. Thanks in advance.
Click to expand...
Click to collapse
Mac randomization is disabled cos our device doesn't support it. Have u been able to connect to your WiFi on LOS 16? Can u send me logcat?
Toedels said:
I'm trying to flash the rom to my nexus5 with twrp. The installation went ok, but when i boot, it seems to stuck at the loading screen (blue ball going from right to left). Am I doing something wrong?
Click to expand...
Click to collapse
Looks very strange. Have u wiped your partitions before installation? Tell me version of TWRP and versions of ROM, GAPPS and Magisk you tried to install.

z3DD3r said:
Mac randomization is disabled cos our device doesn't support it. Have u been able to connect to your WiFi on LOS 16? Can u send me logcat?
Looks very strange. Have u wiped your partitions before installation? Tell me version of TWRP and versions of ROM, GAPPS and Magisk you tried to install.
Click to expand...
Click to collapse
I'm a little further. I've installed lineage-17.1-20200119-UNOFFICIAL-hammerhead.zip and it's booting. But when i want to install open_gapps-arm-10.0-pico-20200124.zip, it says there's not enough space.

Did you resize your partition?
EnesSastim said:
As 07/19 u have to resize, here is the tutorial:
How to increase system (assuming that u have unmodified partitions):
1. Flash twrp-3.3.1-HH-hammerhead.img
2. Open terminal (TWRP -> Advanced -> Terminal)
3. Type hh_repart -m
4. Wait until your phone reboots.
How to revert everything:
1. Open terminal (TWRP -> Advanced -> Terminal)
2. Type hh_repart -r
3. Wait until your phone reboots.
4. Install original TWRP (3.3.1-0 at the current moment)
Download: https://mega.nz/#!x840QaZT!zjxqy1mK07u--T0Jt4451BLiwmpELe4GFdgW-20s4zc
Credits: @z3DD3r
Click to expand...
Click to collapse

Toedels said:
I'm a little further. I've installed lineage-17.1-20200119-UNOFFICIAL-hammerhead.zip and it's booting. But when i want to install open_gapps-arm-10.0-pico-20200124.zip, it says there's not enough space.
Click to expand...
Click to collapse
This old build is permissive and device is not certified in Play Market. Use build 20200123 or newer cos they are enforcing.

z3DD3r said:
Mac randomization is disabled cos our device doesn't support it. Have u been able to connect to your WiFi on LOS 16? Can u send me logcat?
Thanks for response. Had earlier been using crdroid pie rom till Nov 2019 with system partition extended to 1.5 GB and Micro gapps. All was fine till then. As I usually keep on updating the apps regularly..In Dec 19 wifi stopped working. I thought had a hardware failure. The hammerhead kept on going without wifi as it was not a daily driver. In Jan I repartioned the sys again to 2GB using TWRP 3.3.1-2.0GB HH and installed LOS 17.0 with stock gapps as I had enough space. It worked with few minor issues then i kept on upgrading every day as you kept on building now on 25 th Jan 17.1 LOS with 16jan stock gapps.
All builds worked perfectly...but without wifi, which used to trun on sometimes after I copied .mcaddr from /persist to /data/misc/wifi folder through TWRP file manager...but is still unable to download or update data and automaticaly switches back to cellular data.
As far as logcat...kindly advise how to!! As I had never done that.
I am not a developer or IT guy. Hope above helps.
Regards
Added info: Had gone back to stock and installed TWRP HH 1.5 Gb few times. Installed LOS 16 to but the same issue remains...unable to connect to my home static IP as my wifi is hidden and all devices on my home network have individual IP address.
Click to expand...
Click to collapse

Somebod y said:
Did you resize your partition?
Click to expand...
Click to collapse
That did the trick! I'll try to install the latest version now.
It feels really smooth. Didn't expect that on such old device.

There's an article about your ROM on German ZDNet. Hope to see this eventually being official one day.
https://www.zdnet.de/88376265/lineageos-android-10-fuer-nexus-5/

wifi does not work, cannot connect !!
.