My HTC One M9 was ATT. The phone is bootloader unlocked and S-OFF. It has been flashed to International version, M9_3.35.401.12 with Full Wipe ZIP. Viper rom. No problems. I was thinking of looking at Nougat and I understand the the CID and MID have to be the AT&T version and not the 11111111 that I have. It's not hard to change. BUT, when I ran:
D:\ADBdrivers>fastboot getvar all
(bootloader) version:0.5
(bootloader) variant:MTP eMMC
(bootloader) secure:yes
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache:ext4
(bootloader) partition-size:cache: 0x14000000
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0x5e0000000
(bootloader) partition-type:system:ext4
(bootloader) partition-size:system: 0x118000000
(bootloader) serialno:HT53MYXXXX
What is all that about? The phone was serviced by HTC and the motherboard was replaced. What do I have here? Can I flash anything or everything?
The M9 (and every newer HTC phone) is(/are) a bit different than previous HTC models. You need to boot it to download mode and not to the bootloader if you want to get a fastboot getvar output.
Sent from my HTC One M9 using XDA Labs
Related
Using a M9 long time. Flashed MoKee Rom at least and all has worked fine. Very fine...
But today i walked in the city and took my handy - display black. Nothing worked.
i tried to make a hard reset (Pressed all three buttons for a while), but only one big black stripe on display appears and short vibration and display went black again.
when i put usb cable to connect it to pc, a signal of pc comes. you can see m9 in windows explorer, but not access to sd cards.
What can i do....?? is my handy bricked? or display out of order?
Update.... i can get into fastboot, but display is black....
here my result of getvar all
c:\adb>fastboot getvar all
(bootloader) version:0.5
(bootloader) ramdump-mode:false
(bootloader) variant:MTP eMMC
(bootloader) secure:yes
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache:ext4
(bootloader) partition-size:cache: 0x14000000
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0x5e0000000
(bootloader) partition-type:system:ext4
(bootloader) partition-size:system: 0x118000000
(bootloader) serialno:XXXX
tried again, now:
c:\adb>fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_himaulatt
(bootloader) version: 1.0
(bootloader) serialno: XXXX
(bootloader) current-slot:
(bootloader) imei: XXXX
(bootloader) version-main: 4.19.617.1
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U11440971_103.00.61018G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: 11111111
seems, that the display is broken.....what a sh**!!
Is there the possibility of the faliure comes, because i was on ICE Rom before with flashed Nougat Firmware and then switches back to a MM Rom (Mokee 60.1) and still on Nougat FW?
please help
i have a problem i am always getting error (90) when flashing. the phone tries to reboot to system and goes in a bootloop.
Oem rebootRUU takes me to black screen with htc logo for 2 seconds and reboots to that same screen and keeps on rebooting.
i flashed twrp via fastboot but cant boot to twrp.
cant boot to stock recovery.
flashed corresponding hosd.
only bootloader and download mode are working.
system status modified.
locked
s-off
can not unlock bootloader. (oem unlock is off)
M:\HTC\m9\ROM>fastboot getvar all
(bootloader) version:0.5
(bootloader) variant:MTP eMMC
(bootloader) secure:yes
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache:ext4
(bootloader) partition-size:cache: 0x14000000
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0x5e0000000
(bootloader) partition-type:system:ext4
(bootloader) partition-size:system: 0x118000000
(bootloader) serialno:HT54XYJ03502
all:
M:\HTC\m9\ROM>fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_himauhl
(bootloader) version: 1.0
(bootloader) imei: xxxxxxxxxxxxxxxx
(bootloader) version-main: 3.35.401.10
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U11440792_97.00.51203G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: 11111111
any help please
Please read the ReadMe thread. You'll find out that error 90 is completely normal if you use HTC_fastboot and that the SuperCID is everything else than recommended on this phone.
I personally prefer the SD card method for flashing RUUs. Even if the phone tries to boot the system you can still manually boot to download mode and it will continue flashing the RUU.
Hello Guys, i am facing a problem with a HTC One m9U Device
I am unable to enter doownload or recovery mode phone keeps restarting
Here are the information i can get :
-Software status: Offical
-Unlocked
-S-OFF
-fastboot getvar all
(bootloader) version:0.5
(bootloader) ramdump-mode:false
(bootloader) variant:MTP eMMC
(bootloader) secure:yes
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache:ext4
(bootloader) partition-size:cache: 0x14000000
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0x5e0000000
(bootloader) partition-type:system:ext4
(bootloader) partition-size:system: 0x118000000
(bootloader) serialno:FA56HYJ01012
i can flash via fastboot but i don't know the right verion of the firmware or the software previously installed
............
Please..Is there anything i can do ??
Or i just lost phone forever
>>>>>>Note : M9(U) developer version<<<<<
Hi,
Have you tried factory resetting the phone and then try for download or recovery mode?
My device is HTV31, it was bricked and cannot enter the download mode and recovery mode.
The RUU method is not working and I tried fastboot flash (e.g. recovery) but after flashing it cannot enter recovery mode.
In cmd I cannot see or change the cid and mid.
Just want to unbrick and reflash to stock.:crying::crying:
bootloader unlocked
s-off
fastboot getvar all
(bootloader) version:0.5
(bootloader) variant:MTP eMMC
(bootloader) secure:yes
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache:ext4
(bootloader) partition-size:cache: 0x10000000
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0x5e0000000
(bootloader) partition-type:system:ext4
(bootloader) partition-size:system: 0x118000000
fastboot getvar mid
mid:
fastboot getvar cid
cid:
Hope anyone can help
Thanks
Getvar all of course.....
(bootloader) version:0.5
(bootloader) variant:MTP eMMC
(bootloader) secure:yes
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache:ext4
(bootloader) partition-size:cache: 0x14000000
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0x5e0000000
(bootloader) partition-type:system:ext4
(bootloader) partition-size:system: 0x118000000
(bootloader) serialno:FA5BAYJ01774
sometimes I can go to recovery but I cant instal anything, I cant unlock bootloader, the phone is S-on. I tried instal 2roms OPJIMG (maybe it wasnt right version I dont know where to find and try it) from sd card but I received E:footer is wrong...or opening package stuck . Thats phone is UK unknown history.Where I can download some roms for UK(or Europe) I can try some.
Any chance to fix it at home with pc?
Thank you