Mobile data does not work anymore on my C2005 - Sony Xperia M

I had no problem with mobile data on official ROM but from the day I installed CM 13, I can not using mobile data anymore.
First of all, I installed CM 13 beta, then CM 13 stable and some nightly builds. Nothing changed!
I installed AOPS Nougat 7.0 Beta2 few weeks ago on my C2005.
I had "CM13-UNOFFICIAL-20160104-NIGHTLY" and data did not work, I updated it to "stable-20160527-NIGHTLY" (via cmupdater) and nothing changed. After few months, I installed AOPS Nougat 7.0 Beta2 but I can not use the data yet. I installed Nougat Beta2 via TWRP boot manager and wiped everything (all the data, cache, etc.) .
There is few weeks I've installed CM 14.1 on my C2005 and updated it to some nightly builds but the problem still exists after several months and several Android versions.
I installed CM 13 "stable-20160527-NIGHTLY" on my wife's C2005 and the data works a charm! Even I tried to flash mine to that version but problem still exists to my phone even with that version.
The only different between my phone and my wife's C2005 is that I didn't install TWRP on her phone and just installed CM13 with it's own recovery.
I tried instructions described in this link and the problem has not not solved yet.
The last thing is when I enable mobile data (SIM 1 or SIM 2) the cross mark but it does not change to H+ or other marks that shows I'm using data (attached screenshot).
Is hardware problem possible for this issue?
How can I provide CM logs for this problem to find out what's wrong with my phone?
Does someone else have such a problem?

Any idea about debugging and providing some logs?
Any idea about debugging and providing some logs?

Read the bug section of Cynogenmod
http://forum.xda-developers.com/showpost.php?p=69518095&postcount=12
Device-related bugs
– Dual: no internet on 2nd SIM
Click to expand...
Click to collapse
Also, try flashing your device with official rom 4.3 again and try using internet on it. If it works you are doing something wrong in flashing other os, if not, it's device related.

Thanks for reply. Actually I can not use data on SIM1. It's OK for me and it shouldn't be necessarily on specific SIM.
I'm looking for another way of checking data rather than reflashing to official ROM and install CM again. Something like reading /var/log/something.log in Linux distros. Is anything like that possible on AOSP or CM?

No. You can try however reflashing and clean installing aosp 7 or cm14 again, alongwith with THIS patch for dual sim users. But before you install anything make sure you are on 4.3 firmware, or you are likely going to face the same problem again.

Data works on 2nd SIM.
Thank you all for your help.
Believe it or not, the data on 2nd SIM is usable, but 1st SIM.
It could be Edge or HSPA.
As the known bugs says, data is now work on 2nd SIM, I always tried to enable data on the 1st SIM, but few nights ago I had enough free time to check all the options and finally it worked!

Related

ParanoidAndroid 4.4.2 Kit Kat

Hello guys,
I've been using the Beta 4.0 for a while now and it works brilliantly, so I saw an update beta 3 I had to download it.
It has some bugs, not much apps like how you get in the beta, gapps not installing and my data is off but it is switched on.
Having a android phone with no gapps and data is useless, it's like having a nokia 3310, just phone text and that's it.
Please fix if possible.
Thanks
bytes-zn said:
Hello guys,
I've been using the Beta 4.0 for a while now and it works brilliantly, so I saw an update beta 3 I had to download it.
It has some bugs, not much apps like how you get in the beta, gapps not installing and my data is off but it is switched on.
Having a android phone with no gapps and data is useless, it's like having a nokia 3310, just phone text and that's it.
Please fix if possible.
Thanks
Click to expand...
Click to collapse
I installed PA 4.0 Beta 3 as well (yesterday) and I have none of the bugs you're describing: data (3G/2G) works, and Gapps not installing, that depends ENTIRELY on which Gapps you are using. I'm using the latest PA Gapps complete package (23/01/2014) and they just installed for me. So both of the bugs that you're experiencing are only on your end. Are you absolutely sure you set the Data icon correctly, because since Beta 3 PA uses a new Quicksettings systems. See in your systems if it's really working. Also check if your APN is still correct. Download and install the latest version of PA Gapps. If that still doesn't work, you should do a clean install (even though I didn't, I'm coming from CM11 Beta 3, just flashed the latest Gapps and PA 4.0 Beta 3 and everything was good to go).
To be honest you're being rude here and you obviously only tried installing everything once. Well this is a custom ROM scene and you need to do an effort yourself. What I see now is that you're using a "thumbs-down"-icon which is extremely discouraging, comparing this phone to an old dumb phone is also completely out of line because WiFi still works, and there are a ton of other things you could still do even without Gapps and data. This post just smells of you having a sense of entitlement, but don't forget that we're not paying deedwar. If a dev decides not to release a ROM that's very sad and it's all due to threads like these.
So what I'd like you to do now is rephrase your OP, use a positive icon and maybe we can turn this wasted thread into a discussion thread for PA Nozomi instead of a shouting contest.
bytes-zn said:
Hello guys,
I've been using the Beta 4.0 for a while now and it works brilliantly, so I saw an update beta 3 I had to download it.
It has some bugs, not much apps like how you get in the beta, gapps not installing and my data is off but it is switched on.
Having a android phone with no gapps and data is useless, it's like having a nokia 3310, just phone text and that's it.
Please fix if possible.
Thanks
Click to expand...
Click to collapse
Redstarr1 said:
I installed PA 4.0 Beta 3 as well (yesterday) and I have none of the bugs you're describing: data (3G/2G) works, and Gapps not installing, that depends ENTIRELY on which Gapps you are using. I'm using the latest PA Gapps complete package (23/01/2014) and they just installed for me. So both of the bugs that you're experiencing are only on your end. Are you absolutely sure you set the Data icon correctly, because since Beta 3 PA uses a new Quicksettings systems. See in your systems if it's really working. Also check if your APN is still correct. Download and install the latest version of PA Gapps. If that still doesn't work, you should do a clean install (even though I didn't, I'm coming from CM11 Beta 3, just flashed the latest Gapps and PA 4.0 Beta 3 and everything was good to go).
To be honest you're being rude here and you obviously only tried installing everything once. Well this is a custom ROM scene and you need to do an effort yourself. What I see now is that you're using a "thumbs-down"-icon which is extremely discouraging, comparing this phone to an old dumb phone is also completely out of line because WiFi still works, and there are a ton of other things you could still do even without Gapps and data. This post just smells of you having a sense of entitlement, but don't forget that we're not paying deedwar. If a dev decides not to release a ROM that's very sad and it's all due to threads like these.
So what I'd like you to do now is rephrase your OP, use a positive icon and maybe we can turn this wasted thread into a discussion thread for PA Nozomi instead of a shouting contest.
Click to expand...
Click to collapse
That is very well said redstarr1 but i dont quite feel as strongly about it as you. I just see it as a logical statement. However it would help if you can expand on your issues somewhat. Did you do a clean install (wipe data / system / cache / dalvik) or just a dirty flash over the top. What network do you connect too and have you tried Changing your carrier in "access point names". Creating a whole thread for an issue but not elaborating on what you have and havent tried really makes it hard to help.
Beta 5
Hi guys,
The latest update beta 5 works just fine but a few bugs.
Sometimes the back button doesn't work, have to restart the phone for it to start working again.
When charging the wireless is activated, and the battery takes longer to charge.
The phone lags now and then but other than that works fine.
If anyone who can post this on the Xperia S development thread I would really appreciate it, I don't have rights to post on the development thread as yet.
Thanks
Beta 6
Hi guys,
The new update of Beta 6 for Paranoid is brilliant.
After the 1st boot the phone is a little slow but after the rom has settled it's very smooth.
So far all I have tested works perfectly, don't like the launcher much though, so I have my own custom launcher, Next launcher works brilliantly and very customizable. The new launcher's that are added aren't very good and would like if they could get the original launcher if possible.
Other than that all is well.
Thanks Paranoidanroid.
Pa beta 4.3 13052014
Thanks deedwar...the rom(PA 4.3 Beta 13052014) works like a charm. My battery lasts for a day...with data on(3G)....although there is issue of random reboots and the date setting to 1972th year...but i think it will be resolved in the next version i.e. Beta 5/6....Love your work..really appreciate it. :good:
Beta 6
Beta 6 is out..!! Great...!! Trying it now..!!
What about VOIP apps(Viber, line etc.) ? do they work on the latest build ? Cheers.
The latest build
Yes, the VOIP does work..(Viber, Skype etc.,)on the latest builds ..however, I am having a few system UI crashes while using option of any app from the notification bar..like when you're downloading an app from Playstore and which you wish to stop or pause from the by pulling down the notification bar. or using controls of the stock android walkman app.
---
is this room can accept for xpeeria sl lt26ii
plz help me ti find room to my phone 4.4.2
and how can use this room to my phone
I had installed beta 4. A few days ago I installed beta6 but after install and reboot sony logo appears and mobile does nothing more. I restored a backup and today I tried to install beta7 with the same problem. Has anyone the same problem or have any idea to solve it?
How did you install the ROM?
I assume you did wipe cache and dalvik cache before flashing any ROM since you've installed several ROMs. If not, please do so.
Try flashing (with fastboot) a new kernel (twrp or cwm) followed by: (1) factory reset, (2) wipe cache, (3) wipe dalvik cache and then (4) install PA Beta 7.
agugar said:
I had installed beta 4. A few days ago I installed beta6 but after install and reboot sony logo appears and mobile does nothing more. I restored a backup and today I tried to install beta7 with the same problem. Has anyone the same problem or have any idea to solve it?
Click to expand...
Click to collapse
mgrinwis said:
How did you install the ROM?
I assume you did wipe cache and dalvik cache before flashing any ROM since you've installed several ROMs. If not, please do so.
Try flashing (with fastboot) a new kernel (twrp or cwm) followed by: (1) factory reset, (2) wipe cache, (3) wipe dalvik cache and then (4) install PA Beta 7.
Click to expand...
Click to collapse
I did factory reset, wipe cache and wipe dalvik but It didn't work.
I had some troubles trying to restore an old backup after the last failed installation. After the failed restore I tried to install Beta 7 again and It worked. I do not know why, but now I have beta7 working perfectly.
Thanks for your help.
problem with Ant+ on Paranoidandroid 4.3
Yesterday I install Paranoidandroid 4.3 [BETA 7] - and i have problem with ANT+. it don't work. Is there any possibility to repair that.
rednose2 said:
Yesterday I install Paranoidandroid 4.3 [BETA 7] - and i have problem with ANT+. it don't work. Is there any possibility to repair that.
Click to expand...
Click to collapse
Unfortunately, ant+ does not work with android version 4.3 and onwards. This has something to do with the drivers I believe (not sure though). So it doesn't matter which ROM you try: all 4.3.x or 4.4.x will not have ant+ support...
Having FCs updating from beanstalk to paranoid
Hey guys! I recently have the beanstalk rom of deedwar for the Acro S and using the current stable build of the rom which is 4.4.278 then i want to try paranoid so heres what i did
1. I copied the paranoid zip file to my phone
2. Flashed the IMG file from the latest version of paranoid rom via Fastboot mode (i extracted it first)
3. Cleared system, factory reset, cache and dalvik cache
4. Installed the zip file
Well it worked and i have the rom but i experienced random FCs so i just reverted back to stock 4.1 ROM and also i am having trouble with some APPS too.. some apps install perfectly but sometimes they dont
WiFi problem :/
Hi guys
1st - this is a greater rom ever! congratulations
2nd - my wifi works (sometimes) - why sometimes ? because i turn on the wifi on job, ok working connected, when i go to a local whitout wifi, my phone scan the ssids and freeze, when i remember to turn off wifi in my home (lol), that ssids continue on screen, they will disapear only i reboot my phone, can i do anything?
thanks a lot for help
alessandropsbra said:
Hi guys
1st - this is a greater rom ever! congratulations
2nd - my wifi works (sometimes) - why sometimes ? because i turn on the wifi on job, ok working connected, when i go to a local whitout wifi, my phone scan the ssids and freeze, when i remember to turn off wifi in my home (lol), that ssids continue on screen, they will disapear only i reboot my phone, can i do anything?
thanks a lot for help
Click to expand...
Click to collapse
i installed a new kernel, now wifi works.

Installed CM 12.1 everything went fine, went to flash gapps, getting UID error

Coming from stock rooted / unlocked Touchwiz KitKat
Cm12.1 installed just fine but when I rebooted and went to flash gapps I get a non-stop error saying "there's an internal problem with your device, and it may be unstable until you factory data reset."
So I factory reset the device and even installed CM 12.1 without gapps and it still gives me this error.
Factory reset again, try my recovery and I get an error mentoning UID's being messed up (I did this and it did not help http://forum.xda-developers.com/and...on-finally-t3151579/post61729442#post61729442 ) . So I factory reset again and flashed CM 12.1 without gapps and everything is fine.
Boot into recovery and flash gapps and boom the error again. Seems like the only way to get rid of the error (After many trials and errors) is to Restore recovery -> factory reset -> flash rom. The only problem is when I also flash gapps the error comes back.
Now here is the part where I can use YOUR help, in TWRP I keep saying red text that says
"E:error opening '/data/data/com/google.android.gms/files/images/games/de7f5650'
E:error: Not a directory"
on everything I do, from formating the system to flashing a rom. I think this is where my problem lies.
Other notes: No sd card,
when CM is working, I am getting no reception (Looks like a full but has ! next to it)
When CM is working, the messaging app does not even open and just instantly closes
OK I'll break into parts I see 1: gapps 2 signal 3:msg app.
1: GAPPS
cm 12.1 is android 5.1.* so you need to verify you have correct gapps. Use gapps for 5.1 hopefully that will fix problem. Factory reset, flash cm 12.1, flash gapps 5.1, wipe dev/cache, and reboot. Should be working fine after.
2: Signal is due to rom bugs but usually due to bad/wrong apn settings or bad efs/modem pretty much all the time from my experience. So I'll break that down from easiest to the latter and hopefully we'll fix it.
a: check you apn settings and see the attachments. I'm on lte tmo so if you aren't the Google apn setting for your carrier.
b: flash back up of moden/efs
3: msg app might be fixed since gapps was installed but if not only thing I can think of is clear data/cache for msg app.
Hope I could help
these days I'd use LineageOS for the Note 3/SM-N900T (I use nightlies and my note 3 used on wifi only) I can't test the normal 2g 3g 4g or lte cuz I dont have a compatible sim card (I have a nano sim in my j7 prime so it won't fit) it takes a bigger sim so yeah......I have gapps installed for my android version and they work fine for me
BsB5068 said:
N900TUVUCNB4
Click to expand...
Click to collapse
Rolatnor said:
these days I'd use LineageOS for the Note 3/SM-N900T (I use nightlies and my note 3 used on wifi only) I can't test the normal 2g 3g 4g or lte cuz I dont have a compatible sim card (I have a nano sim in my j7 prime so it won't fit) it takes a bigger sim so yeah......I have gapps installed for my android version and they work fine for me
Click to expand...
Click to collapse
lineageos 16.0 is what I've been running on it, i needed a newer os cuz stock 5.0 was the last official version, and pokemon go was dropping support for the note 3 with stock roms, now switching to LineageOS 17.1 on my note 3 i'll update whether gapps works so you know
LineageOS Downloads
download.lineageos.org
LineageOS 17.1 is android 10
btw I have sd cards in all my spare phones 8gb normally, so I am recommending a small sd card 4gb-16gb because it makes it easier to flash roms with twrp
google play works, gmail works, yt works, sound works, flashlight works, and camera works on LineageOS 17.1
note 3 sm-n900t
i used the nano gapps from opengapps
the newest file version of lineageos 17.1 on their site

frustrating situation

I have tried several rom, 4.4.4 Note4 ported and the 5.1.x roms. I get 1 out of 2 problems when I install either version.
1. If I install 4.4.4 Note4 ported roms, mobile data works fine but I get intermittent SD card errors.
2. If I install 5.1.x roms, I do not get mobile data but do not get SD card errors.
I really want to use 5.1.x but I cannot find a fix for the mobile data.
I backed up EFS and Modem in TWRP, installed 5.1.x, then restored EFS/Modem but nothing works.
Of course, I checked the APN and set up automatically, I selected and rebooted. Still mobile doesn't work.
Any ideas?
Hello bro I think you are very lucky because I have more wrost situation than you i have made my phone link junk
When I use 4.3 based ROM custom or official
Bluetooth not works and unable to connect with network my baseband and imei are unknown
When I use kitkat ROM phone does not able to complete welcome wizard
I am searching for solution from last 6 months but did not find any solution
format sd card in recovery and the do a clean install of rom. I use resurrection rom and everything works like it should.

No SIM Card detected with MM Bootloader

(TL;DR available)
I have a Zenfone 2 (Z00A) and I used to have LineageOS (Android N 7.1) installed, however after some time I noticed the SIM Card wasn't getting detected anymore. At first I tought it was Lineage, so I updated it to the latest experimental, still, nothing. Then I decided to test the SIM in another phone with the same version of Lineage, with my old Zenfone 5, and the SIM still worked. So I reset my Zenfone 2 back to stock ROM, stock Bootloader, stock everything, and the SIM worked. Still thinking it was Lineage, I installed Ressurection Remix, which also requires the MM Bootloader, and the SIM didn't work once again.
*** TL;DR ***
I believe the MM Bootloader is causing the phone to not read the SIM card. It only happens with this provider, since other providers' cards are still recognized. It's very weird. Any help is fairly appreciated.
(This is my first thread and english is not my primary language so sorry for any mistakes.)
1) Which stock ROM does it work with , surely its MM bootloader ?
2) Which TWRP did you have installed.
3) Depending on Which TWRP you do have and what stock ROM (answers from 1&2 above) , you back up stock rom which works , back up in TWRP and simply restore it, a two minute job .
Depending on all answers above...
Try slim7 ROM till linos is fixed . RR is based on linos.
Latest linos does take approx 5 mins to register sim after reboot, don't touch device , leave screen / display setting to half hour and watch it connect without touching the phone.
This question should be answered in thread of ROM development you had trouble with , reading related threads is also wise .
https://forum.xda-developers.com/showpost.php?p=71270877&postcount=25
timbernot said:
1) Which stock ROM does it work with , surely its MM bootloader ?
2) Which TWRP did you have installed.
3) Depending on Which TWRP you do have and what stock ROM (answers from 1&2 above) , you back up stock rom which works , back up in TWRP and simply restore it, a two minute job .
Depending on all answers above...
Try slim7 ROM till linos is fixed . RR is based on linos.
Latest linos does take approx 5 mins to register sim after reboot, don't touch device , leave screen / display setting to half hour and watch it connect without touching the phone.
This question should be answered in thread of ROM development you had trouble with , reading related threads is also wise .
https://forum.xda-developers.com/showpost.php?p=71270877&postcount=25
Click to expand...
Click to collapse
1) I am currently running SuperZen which is based on Android L, works fine.
2) 3.0.2 and I tried with older 2.x.x versions too, no success.
3) Can you specify a little more? A bit confused with what you mean.
I will try LineageOS once again, and shall also try Slim7.
I posted this here since I didn't, and still don't, beleive this has to do with the ROM, but with the Bootloader itself.
I read a lot of threads, including the one you sent me, tried everything without success.
Thank you for now!
kronkraken said:
1) I am currently running SuperZen which is based on Android L, works fine.
2) 3.0.2 and I tried with older 2.x.x versions too, no success.
3) Can you specify a little more? A bit confused with what you mean.
I will try LineageOS once again, and shall also try Slim7.
I posted this here since I didn't, and still don't, beleive this has to do with the ROM, but with the Bootloader itself.
I read a lot of threads, including the one you sent me, tried everything without success.
Thank you for now!
Click to expand...
Click to collapse
Backed up, completely wiped, installed MM Bootloader and flashed Slim7. No SIM. Set Sleep Timer to 30 minutes, rebooted, unlocked screen and left the phone for 10 minutes. No SIM. Did it again but this time didn't even unlock the phone, no SIM. Completely wiped and flashed LineageOS, same process, no SIM. Even went further and tried CM13 (Android M), same process and still no SIM. At this point I am 99.9% sure it is the MM Bootloader that is causing the issue, because as soon as I fallback to the L Bootloader and flash any L ROM, like Stock ASUS or Super ZEN the SIM works fine.
Try stock M , there's been about 6 stock updates in stock M
timbernot said:
Try stock M , there's been about 6 stock updates in stock M
Click to expand...
Click to collapse
Not sure where I can find Stock M, but I found an update on ASUS' Website, Firmware version UL-4.21.40.144 that is Brazil specific, wonder if it has something to do with the SIM not working.
kronkraken said:
Not sure where I can find Stock M, but I found an update on ASUS' Website, Firmware version UL-4.21.40.144 that is Brazil specific, wonder if it has something to do with the SIM not working.
Click to expand...
Click to collapse
are you from Brazil ?
It shouldn't by rights , yes there was probs with Brazilians receiving signal but jrior dev , incorporated those fixes for Brazilians into CM which should be carried through lineageOS.
I don't have anytime right now but will help you update.
Watch you don't brick doing anything daft.
:crying::crying:
timbernot said:
are you from Brazil ?
It shouldn't by rights , yes there was probs with Brazilians receiving signal but jrior dev , incorporated those fixes for Brazilians into CM which should be carried through lineageOS.
I don't have anytime right now but will help you update.
Watch you don't brick doing anything daft.
:crying::crying:
Click to expand...
Click to collapse
Okay, for now I will just restore my backup! Thanks!
kronkraken said:
Okay, for now I will just restore my backup! Thanks!
Click to expand...
Click to collapse
I was able to get the Official MM Bootloader installed, and SIM works fine. Not being able to install any MM-based ROMs tho, they all give Error 7: "This package supports Ifwi Versions: %2; 0094.0183;this device has Ifwi version ."

Most stable Rom for LG g-pad 7.0 v410?

Hi, I have the latest CM12 installed in my tablet, but I have a lot of issues, especially when installing multiple apps or if I try to change the Launcher. It gets into boot loop and there is nothing one can do but re-flash the rom, which is pretty annoying. It has happened to me already 3 times in a short while and I am thinking of flashing LineageOS. However, I hear it is still very buggy, especially the issues with wifi. So I would like to ask which is the least buggy Rom for 7.0 v410 or if there is a way to avoid CM12 from getting the problem with boot loop.
Boot loop has been caused when trying to change Launcher (because trebuchet regularly crashes), when installing x-plore file manager and in a clean flash when I attempted to install multiple apps at the same time. In all cases it got stack in boot loop, or would start only to restart after a while, endlessly.
Finally, I opted for LineageOS 14.1.
I had the 11-11 Nightly for some time and seemed fine. Today I updated to 25-11 Nightly. It feels maybe slightly laggy, but still checking it.
I have also installed "Best WiFi Keeper" app from play store and it generally keeps me connected. However, if connection is lost (e.g at restart or if I get out of range), I have to reconnect manually. I tried few apps for reconnecting but nothing worked. It appears that although the WiFi network is seen, the tablet cannot really re-establish the connection automatically.
I found Nothing stable yet.. In last few days, I have installed CM 12.1, same trouble.. I installed Tipsy and Tesle, unable to install apps from playstore. Tried CM 13 and Lineage OS latest build as you, Wifi Teathering and USB teathering not working and same problem with wifi connectivity. Keed posted if you find something better.. I shall too...
Tesla works great for me. I'm running a lollipop version that's still on androidfilehost; I'm not sure if GZR ever got updated beyond 5.1 for V410.
I've had CM 14.1 (long enough ago it was still CM and not LOS) on the tablet, and it felt like it would get laggy. That could just be from junk my kid installs though, but I don't seem to have that problem with Tesla.
I installed Tesla (Tesla-v410-5.1.1.High_Voltage.2.2.1-Release-20150902.zip from https://androidfilehost.com/?fid=24052804347807214) with open G apps but getting errors while installing apps from Play store(Some error code 963 - tried cleaning cache of playstore, play services download manager, removing google account and adding again - Nothing works). Same situation with tipsy. Any help?
kingzones said:
I installed Tesla (Tesla-v410-5.1.1.High_Voltage.2.2.1-Release-20150902.zip from https://androidfilehost.com/?fid=24052804347807214) with open G apps but getting errors while installing apps from Play store(Some error code 963 - tried cleaning cache of playstore, play services download manager, removing google account and adding again - Nothing works). Same situation with tipsy. Any help?
Click to expand...
Click to collapse
That is probably what I'm running, I don't have my tablet right now. I think I flashed it with opengapps nano. I didn't have to do anything unusual to get play store to work.
Tipsy uses the same base as Tesla and Validus. Since it is persisting across multiple flashes and roms, consider formatting the internal storage if it isn't too much hassle, the TWRP wipe where you have to type "yes" to confirm. Sometimes some remnants in userdata that aren't touched by the normal system/data/cache/dalvik wipe cause problems like this and can persist the way you're describing.
Just make sure you have rom and gapps on an external SD or you have confirmed you can push files to the tablet in TWRP over usb via mtp or adb before you blank the internal storage.
jason2678 said:
That is probably what I'm running, I don't have my tablet right now. I think I flashed it with opengapps nano. I didn't have to do anything unusual to get play store to work.
Tipsy uses the same base as Tesla and Validus. Since it is persisting across multiple flashes and roms, consider formatting the internal storage if it isn't too much hassle, the TWRP wipe where you have to type "yes" to confirm. Sometimes some remnants in userdata that aren't touched by the normal system/data/cache/dalvik wipe cause problems like this and can persist the way you're describing.
Just make sure you have rom and gapps on an external SD or you have confirmed you can push files to the tablet in TWRP over usb via mtp or adb before you blank the internal storage.
Click to expand...
Click to collapse
can you tell me if hotspot and usb tethering is working on tipsy? Thanks.
xdause said:
can you tell me if hotspot and usb tethering is working on tipsy? Thanks.
Click to expand...
Click to collapse
I'm on Tesla, but it has the same base as Tipsy. I don't have data on the tablet so it isn't a 100% conclusive test, but it doesn't seem to work. The switch for USB tethering never turns on. Wifi turns on but never connects properly. My laptop does briefly show connection then disconnects with both USB and wifi tethering. It could be because there is no data connection on my tablet, but looking through dmesg on the laptop gives me the impression that something on the tablet isn't working right.
kingzones said:
I found Nothing stable yet.. In last few days, I have installed CM 12.1, same trouble.. I installed Tipsy and Tesle, unable to install apps from playstore. Tried CM 13 and Lineage OS latest build as you, Wifi Teathering and USB teathering not working and same problem with wifi connectivity. Keed posted if you find something better.. I shall too...
Click to expand...
Click to collapse
I'm on lineageOs 14.1 which is alright though the wifi issue is still there. However, someone may have found a solution, but I don't know how to implement it. Check posts 207, 210 and 215 in this thread: https://forum.xda-developers.com/g-...eageos-14-1-v400-lg-g-pad-7-0-t3583952/page22
nicospanas said:
I'm on lineageOs 14.1 which is alright though the wifi issue is still there. However, someone may have found a solution, but I don't know how to implement it. Check posts 207, 210 and 215 in this thread: https://forum.xda-developers.com/g-...eageos-14-1-v400-lg-g-pad-7-0-t3583952/page22
Click to expand...
Click to collapse
Would you (or anyone who sees this) please tell me is it possible to flash TWRP if I'm on 5.0.2? Or must I downgrade first?
I'm rooted already. TBH stock is pretty solid and if the custom roms have too many bugs I might pass. But I would like to flash Viper4Android and don't think I've ever installed it without a custom recovery. Many thanks in advance.
KLit75 said:
Would you (or anyone who sees this) please tell me is it possible to flash TWRP if I'm on 5.0.2? Or must I downgrade first?
I'm rooted already. TBH stock is pretty solid and if the custom roms have too many bugs I might pass. But I would like to flash Viper4Android and don't think I've ever installed it without a custom recovery. Many thanks in advance.
Click to expand...
Click to collapse
I made the same question more or less, over a year ago here: https://forum.xda-developers.com/android/development/help-installing-cm-t3483074
You cannot flash another rom over lollipop and I've never seen twrp for android 5.0.2 for v410. I am not 100% sure because my question was a bit different, but I assume from the replies, that probably not.
nicospanas said:
I made the same question more or less, over a year ago here: https://forum.xda-developers.com/android/development/help-installing-cm-t3483074
You cannot flash another rom over lollipop and I've never seen twrp for android 5.0.2 for v410. I am not 100% sure because my question was a bit different, but I assume from the replies, that probably not.
Click to expand...
Click to collapse
Thanks. That's more or less what I thought. From what I'm hearing there are some bugs in the roms that no doubt aren't being maintained at this late stage so I think I'll stick with stock (would be nice to have a custom recovery though.)
Not that it matters (a year later) but lots of people root with Kingroot when there isn't another option and there's several ways to remove all the bits left behind and switch it to supersu.
Thanks again!
Well, I have a work around to stop wifi from disconnecting in lineage os. After that I did not know when wifi got disconnected and reconnected.
Just download E-Robot from playstore.
https://play.google.com/store/apps/details?id=com.bartat.android.robot
And set it to settings as per screen shot.
kingzones said:
Well, I have a work around to stop wifi from disconnecting in lineage os. After that I did not know when wifi got disconnected and reconnected.
Just download E-Robot from playstore.
https://play.google.com/store/apps/details?id=com.bartat.android.robot
And set it to settings as per screen shot.
Click to expand...
Click to collapse
It works! Thank you so much! It seems the LOS developers have stopped trying to fix the wifi issue but it is important. The workaround even works at restart, with some delay, but it works!
Just to clarify to newbies like me, where ssid you have to put the name of the network you want to connect. I wonder if one can add more networks, so it can connect to any saved network according to where you are. You think that's possible?
nicospanas said:
It works! Thank you so much! It seems the LOS developers have stopped trying to fix the wifi issue but it is important. The workaround even works at restart, with some delay, but it works!
Just to clarify to newbies like me, where ssid you have to put the name of the network you want to connect. I wonder if one can add more networks, so it can connect to any saved network according to where you are. You think that's possible?
Click to expand...
Click to collapse
That would be great.. I shall try.. if successful, I shall post results.
I have a uk410, the US Cellular variant of the v410. I tried the CM12.1 "stable" release cm-12.1-20151117-SNAPSHOT-YOG7DAO1K5-v410.zip found here (archive.org/download/cmarchive_snapshots), along with Open GApps nano for 5.1 (opengapps.org/?api=5.1), and quickly got the infinite rebooting issue.
I then switched to the Telsa ROM mentioned earlier in this thread (Tesla-v410-5.1.1.High_Voltage.2.2.1-Release-20150902.zip) found at androidfilehost.com/?fid=24052804347807214, again with Open GApps nano for 5.1 (build open_gapps-arm-5.1-nano-20180922.zip), and have been running it with no issues for two days. My wifi is connected, and stays connected (tested two different routers), Play Store and apps have been working fine, and no crashes so far.
I'm using TWRP 3.1 (twrp-3.1.0-0-v410.img).
Thanks for mentioning Tesla, @jason2678 !
So like all of you I was looking for a rom to install on this v410 7" tablet, and it looks like I should just give up or stick with 4.4.2 stock if I want to go through the rooting process.
Basically all the development roms end with the same problems, wifi dropping, hostspot not working, no ir blaster, volume problems, bluetooth errors, and several hundred posts about lolipop memory leaks crippling the tablet because of only 1gb mem.
So, I am asking all of you, is there any real reason to root it, besides going back to stock 4.4.2?
And lastly, is the stock 4.4.2 kdz image that is floating around a test version, and if so is there an actual official kdz image somewhere that isn't a test image?
Thanks...
CrDroid by far in my opinion. Lineage based, 7.1.2.
Also, e/ os has been unofficially released. No Google anything...an entirely new Google list operating system by lineage. It's lightning fast and runs magisk perfectly. It's basically like nothing you've ever seen before and if you look under LG g pad 7.0 on Android file host, go to the second page and click on the last user who goes by the name anonymous and you'll find the ROM there. I had no idea what it was until my g pad boot it up and I saw the e logo. I pretty much **** myself in excitement

Categories

Resources