Broke Camera Ribbon - Nexus 5X Q&A, Help & Troubleshooting

So as I was replacing the screen my nexus I stabbed the camera ribbon the screw driver hoping it didn't do anything. Ends up the camera is dead and is no longer showing up as recognized. I open the camera app and it crashes. Few apps allow me to use front camera still. So I ordered the replacement and waiting. It seems my LED isn't working and i know I didn't hit that but would that have a relation to camera. Like will it work after I replace the camera?

cgibbons51 said:
So as I was replacing the screen my nexus I stabbed the camera ribbon the screw driver hoping it didn't do anything. Ends up the camera is dead and is no longer showing up as recognized. I open the camera app and it crashes. Few apps allow me to use front camera still. So I ordered the replacement and waiting. It seems my LED isn't working and i know I didn't hit that but would that have a relation to camera. Like will it work after I replace the camera?
Click to expand...
Click to collapse
I haven't looked at this in awhile but the ifixit teardown might help you see if the LED and camera are integrated with the ribbon that you accidentally stabbed.
https://www.ifixit.com/Teardown/Nexus+5X+Teardown/51318
Sent from my Nexus 5X using Tapatalk

SlimSnoopOS said:
I haven't looked at this in awhile but the ifixit teardown might help you see if the LED and camera are integrated with the ribbon that you accidentally stabbed.
https://www.ifixit.com/Teardown/Nexus+5X+Teardown/51318
Click to expand...
Click to collapse
Well I tried that and it appears they aren't connected. The LED is actually soldered straight to the motherboard. What's odd is they worked before the screen replacement and before the camera ribbon problem. But it appears apps that control the LED are saying I literally don't have LED. Like it says it appears your phone doesn't have LED support so we will use your screen blah blah blah.

cgibbons51 said:
Well I tried that and it appears they aren't connected. The LED is actually soldered straight to the motherboard. What's odd is they worked before the screen replacement and before the camera ribbon problem. But it appears apps that control the LED are saying I literally don't have LED. Like it says it appears your phone doesn't have LED support so we will use your screen blah blah blah.
Click to expand...
Click to collapse
I am entirely uneducated in this regard, but maybe it is possible the LED issue is associated with the camera ribbon? Are you certain the LED was not dislodged in any way? Either way, I think it is a waiting game until your replacement camera arrives and you can slot that in to test.

SlimSnoopOS said:
I am entirely uneducated in this regard, but maybe it is possible the LED issue is associated with the camera ribbon? Are you certain the LED was not dislodged in any way? Either way, I think it is a waiting game until your replacement camera arrives and you can slot that in to test.
Click to expand...
Click to collapse
Yah didn't even touch the LED at all. Waiting game it is

update i replaced and camera and boom LED works so i guess there's an odd connection somewhere thanks for help!

Related

Back light not working on Xperia play, what do i need to change?

I just traded my mini pro for a Xperia play with no back light working and sd card not reading. Ive dismantled all of the play and put it all back together and still the same problem and i have also used SEUS to reflash the software and still no back-light. You can see the play is on, its just really hard to see and i can receive calls. Im hoping to fix this for my my girl friend as i already have one.
My main concern is the back light and then the sd i think lol also the green light comes on when charging
So do i need a new screen or can i just change a part?
Thanks
Is the screen light built in to the screen? Or could it be the proximity sensor is broke any one please
Also if I open the game pad a little bit the screen works and fully open didn't work.
Sent from my R800i using xda premium
danlivesey said:
Also if I open the game pad a little bit the screen works and fully open didn't work.
Click to expand...
Click to collapse
Possibly a damaged ribbon cable?
That's what I think but the ribbon that connects to the screen and the keyboard is hard to get to, the only side I can get to is the side that connects to the keyboard, there's a video on YouTube but didn't show you how to take your digitizer or get the ribbon out completely.
Sent from my R800i using xda premium
danlivesey said:
That's what I think but the ribbon that connects to the screen and the keyboard is hard to get to, the only side I can get to is the side that connects to the keyboard, there's a video on YouTube but didn't show you how to take your digitizer or get the ribbon out completely.
Sent from my R800i using xda premium
Click to expand...
Click to collapse
The digitizer is not attached to the LCD and comes off with the frame. The cable goes under the LCD module and I've seen it for sale but I'm not sure if it's meant to detach from the other end. If it has a short or something, It's likely where it connects to the bottom half or where it folds anyway. Have you taken it apart and taken a look at the folding cable?
i also have the same problem.
my lcd light are off.
but my touchscreen(lcd) still working, i can make call receive call, open app and other.
but the light too dim. hardly to see anything that i click/touch on the lcd.
plssss help me out.
does i need to change the lcd? or other parts of the phone?
and where is the light on the lcd btw?
i already flash my phone. so i dont think it is software problem.
i have the same problem but have no light at all, screen self is responsive if im touching it but no backlight
please help
Solve myselft, my problem is hardware coz i flash my xperia play and it doesnt work either, so i send to shop to repair and it done, the prob could be ribbon n lcd, mine was ribbon
Sent from my R800i using xda app-developers app
which cable?
which cable do you mean? the flex cable that goes with the slide up and down or something else on the digitizer?
as an idiot i changed the lcd but of course nothing works.. still no backlight...

[Q]What went wrong?

I have a huge problem, basically I was sick and tired of my black housing for the phone, so I ordered the white one from ebay. I was so happy it came that I forgot to shut down the phone, well during half way of the work, while I was trying to pry it open I remembered and turned it on and it worked I opened it a bit more open and it suddenly went black and since then everything is working except the LCD.
I have no idea whats the problem is the LCD broke or what?
Also when it shut down and me trying to reconnect the LCD flat cable to see if thats the problem I was nervous and did that which you see in the picture. Now my issue is what if I buy a new screen connect it and it doesn't work because the FPC connector?
Silthrax said:
I have a huge problem, basically I was sick and tired of my black housing for the phone, so I ordered the white one from ebay. I was so happy it came that I forgot to shut down the phone, well during half way of the work, while I was trying to pry it open I remembered and turned it on and it worked I opened it a bit more open and it suddenly went black and since then everything is working except the LCD.
I have no idea whats the problem is the LCD broke or what?
Also when it shut down and me trying to reconnect the LCD flat cable to see if thats the problem I was nervous and did that which you see in the picture. Now my issue is what if I buy a new screen connect it and it doesn't work because the FPC connector?
Click to expand...
Click to collapse
The connection pins themselves do not look damaged, on the plastic shroud. The socket should work fine.
It's a little hard to make out fine detail in the pic...take a magnifying glass to it and check for cracks or splits in the pins.
Tigerlight said:
The connection pins themselves do not look damaged, on the plastic shroud. The socket should work fine.
Click to expand...
Click to collapse
Hmm it seems like it goes one small one then longer one, its hard to see from he picture but I think two of the longer ones are missing. And what should be the problem with the LCD because that happened before I damaged the socket.
Between thank you for the fast reply.
Silthrax said:
Hmm it seems like it goes one small one then longer one, its hard to see from he picture but I think two of the longer ones are missing. And what should be the problem with the LCD because that happened before I damaged the socket.
Between thank you for the fast reply.
Click to expand...
Click to collapse
Well I don't see any missing pins, but you'll have a better view.
As for you LCD...no idea. Generally it's a good idea to turn everything off before you open electrical equipment. You could have caused a short in the process of opening it live.
Tigerlight said:
Well I don't see any missing pins, but you'll have a better view.
As for you LCD...no idea. Generally it's a good idea to turn everything off before you open electrical equipment. You could have caused a short in the process of opening it live.
Click to expand...
Click to collapse
Would that be on the motherboard or the LCD, basically should I bother repairing it or just sell it for spare parts thats my issue right now.
Silthrax said:
Would that be on the motherboard or the LCD, basically should I bother repairing it or just sell it for spare parts thats my issue right now.
Click to expand...
Click to collapse
If you try to power it on does the vibrate activate...basically does it do everything you'd expect EXCEPT the screen doesn't work or does it do nothing at all?
Tigerlight said:
If you try to power it on does the vibrate activate...basically does it do everything you'd expect EXCEPT the screen doesn't work or does it do nothing at all?
Click to expand...
Click to collapse
Like I said earlier everything works, I can still receive SMS, phone calls (I can answer them since the digitizer works), e-mails, Facebook msgs, vibrations, sound, microphone... Everything works except the LCD.
Silthrax said:
Like I said earlier everything works, I can still receive SMS, phone calls (I can answer them since the digitizer works), e-mails, Facebook msgs, vibrations, sound, microphone... Everything works except the LCD.
Click to expand...
Click to collapse
You might try replacing the LCD and hope you haven't damaged the connector. If you have, a self-repair is unlikely given its size and that of the pins.
Or you dump it and buy a new phone.
Either way it's gonna cost you money. The first is cheaper but may not work.
I think that's your only options.
Yeah I knew from the start it was gonna cost me money, but I wanted the cheapest way out
Thanks a lot for the help I think I am gonna try to fix it. Get some experience while doing it too
Silthrax said:
Yeah I knew from the start it was gonna cost me money, but I wanted the cheapest way out
Thanks a lot for the help I think I am gonna try to fix it. Get some experience while doing it too
Click to expand...
Click to collapse
Hey did you ever figure out the connector issue? Same problem

LG G4 camera broke, had to replace. Anyone else?

Verizon VS-986 here.
A couple of days ago, I went into the Camera app to take a picture and it was "stuck" on the selfie camera, and the icon to switch to the main camera was gone. I went back to the home screen and back into Camera, and fiddled with the Modes, and it finally came back. I clicked on it, and the app showed an image for a couple seconds, then froze up. I did a lot of back and forth with it, and sometimes it would show an image for a second and freeze; sometimes it went totally black and froze the app; eventually, after power cycling a few times, it was stuck on the front-facing camera for good, with no icon to swap to the back camera. Basically, at this point, the app had recognized that there WAS NO back camera and didn't even bother presenting the option anymore.
This had all the hallmarks of a hardware problem. Glitchy, intermittent outages, then the hardware simply not recognized anymore. Still, I cleared out caches and searched online and found this article: How to Fix Camera Failed Problem on LG G4 (recomhub.com/blog/how-to-fix-camera-failed-problem-on-lg-g4/), none of which did anything to help. (I'm not rooted/unlocked so I couldn't clear the cache partition like they recommended, though it clearly wouldn't have helped anyway.)
Couple other things that may or may not be relevant: it was VERY hot out (80+ degrees) when then problem started and the phone was hot as a result of it. But it kept happening after cool down.
A crazy other thing that happened was, that evening, after rebooting one last time just to be sure, half the screen turned into rainbow noise during the Verizon logo and stayed that way for several seconds, even into the lock screen. That pushed me over the edge.
I went to a Verizon store and they kindly swapped it out for me. But that was weird and I wanted to put it on the record. Also curious whether anyone else had this problem.
Not that problem, but check out this other thread I started regarding the camera causing the phone to overheat: http://forum.xda-developers.com/showthread.php?t=3142806
Sent from my LG-H811 using Tapatalk
I've had the rainbow noise on the right half of the screen show up on boot at the Verizon screen as well. It stayed that way until the lock screen and that's when I powered the phone off, pulled the battery and let the sit for a few minutes. Haven't had the problem in the weeks since I've had the phone though.
The exact thing happened to me. My rear camera will not work at all. And the flashlight also will not work. Tried rebooting, factory resetting it, clearing cache, and took out my battery and still nothing.
I had a Verizon G4 that the rear camera stopped working on. I believe it was caused by a drop. I posted on here about it. For mine it just wouldn't focus anymore. Replacement was very easy, you only need a small Philips head screwdriver, and your fingernail, or plastic tool to remove the connector and pry the camera out which is held in by adhesive.
Replacement OEM part out of a Sprint G4 was under $14 USD on eBay.
lopezj said:
The exact thing happened to me. My rear camera will not work at all. And the flashlight also will not work. Tried rebooting, factory resetting it, clearing cache, and took out my battery and still nothing.
Click to expand...
Click to collapse
Hello,
I have the exact same issue. Do you have a solution ? I dont want to rma anymore, screen coating than bootloop than this, this phone is a true disaster.
Only other thing any one could try is a tot lgup restore if that dont work either more than likely its a hardware failure. I had issues on my g2 with a could not connect to camera from the factory. Found out my stock rom was corrupted from lg toted and worked like new. Did it again a few moths later. Toted avain worked like new. I asume something in the camera files corrupted. Just throwin in my 2 cents.
Hello, thanks for the answer.
I fixed the issue by myself few minutes ago, i simply disconnected than reconnected the rear camera plug to the motherboard.
Zenouzenou said:
Hello, thanks for the answer.
I fixed the issue by myself few minutes ago, i simply disconnected than reconnected the rear camera plug to the motherboard.
Click to expand...
Click to collapse
Did u by chance notice any corrosion or oxidation on the contact surfaces?
Nope, nothing special on these.
Well i spoke to fast, my camera is dead again.
rick09 said:
I had a Verizon G4 that the rear camera stopped working on. I believe it was caused by a drop. I posted on here about it. For mine it just wouldn't focus anymore. Replacement was very easy, you only need a small Philips head screwdriver, and your fingernail, or plastic tool to remove the connector and pry the camera out which is held in by adhesive.
Replacement OEM part out of a Sprint G4 was under $14 USD on eBay.
Click to expand...
Click to collapse
Hi, how did that 14 dollar camera work out for you? I'm getting wildly varied prices for replacement rear camera on eaby. Do you have a link to the one you bought and did it work as well as the original? Thanks.
http://m.ebay.com/itm/351575783287
Im gonna try this one
Zenouzenou said:
http://m.ebay.com/itm/351575783287
Im gonna try this one
Click to expand...
Click to collapse
I'd go for that one too but unfort it's 33 dollars to post west europe lol
I'm gonna go for this one but god knows what it's like at this cheap price but I'll take the chance.
http://www.ebay.ie/itm/151946458176?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Jesus i didnt see that. Sorry
So my brand new original camera module arrived today, i replaced it myself and...the camera still doesn't work. Looks like it's an MB problem. I have to send this god damn phone to LG again..
Hello, here is an update about my camera. LG repair the phone by changing the motherboard and the camera module.

dead camera and flashlight hardware issue

Hey, my m9 camera and flashlight died. Repairmen told me that it's a hardware issue and i also tried factory reset and some original ruu but nothing helped. So I'm wondering if what do i need to replace to make it work again? A camera or the whole motherboard that's connected to it? In my opinion it should be the motherboard cause if it's just a camera issue then flashlight should be working fine.
SORRY IT WAS SUPPOSE TO GO IN GENERAL now i don't know how to move it
Hi,
same here, I changed daughter board, flex cable from main board to daughter board still don't work...
fedezz said:
Hi,
same here, I changed daughter board, flex cable from main board to daughter board still don't work...
Click to expand...
Click to collapse
i was going to buy a new daughter board too when i have some free time but if didin't worked, I don't know anymore. Maybe it's the main motherboard problem? btw did this happened after an update or it just died?
temorinkaari said:
i was going to buy a new daughter board too when i have some free time but if didin't worked, I don't know anymore. Maybe it's the main motherboard problem? btw did this happened after an update or it just died?
Click to expand...
Click to collapse
after screen change I got that problem...I think this issue in mainboard, or maybe in main camera, but why flashlight affected, also noticed that NFC not work properly...
I actually tried changing the rear camera but with no luck at all. I'm not using NFC so i don't know if it works properly or not. I wonder if it's repairable :/
power button cable is causing that issue
how is that?

Optical Image Stabilization wire sounds how to turn off?

Hey there,
Its not possible to get a AF picture /video. pictures blurred and washed out..
i checked out theres an OIS build in, and i think its going crazy and i would like to know if its possible to disable the function. Thanks everybody..
euphore
edit:
maybe that way..? https://forum.xda-developers.com/showpost.php?p=62039311&postcount=64
or could this method works for me?
https://forum.xda-developers.com/showpost.php?p=62625493&postcount=89
euphore said:
Hey there,
if its possible to disable the function.
Click to expand...
Click to collapse
No way. I had this same issue, it's a hardware failure, unfortunately. Only way is to replace the camera module or the whole phone. Fortunately mine had the warranty yet, so I've got a replacement phone.
Runner_cz said:
No way. I had this same issue, it's a hardware failure, unfortunately. Only way is to replace the camera module or the whole phone. Fortunately mine had the warranty yet, so I've got a replacement phone.
Click to expand...
Click to collapse
I expect that response..
but as u can see in my second link, there had someone sucess with disabling that feature..
i mean, the OIS ist not really broken, it looks like its out of calibration. so maybe theres a possibility to turn it off or to calibrate it again?..
euphore said:
I expect that response..
but as u can see in my second link, there had someone sucess with disabling that feature..
i mean, the OIS ist not really broken, it looks like its out of calibration. so maybe theres a possibility to turn it off or to calibrate it again?..
Click to expand...
Click to collapse
The OIS is simply a 2-axis gyroscope and actuator built into the camera module. The camera module is a stand-alone subsystem with it's own firmware independent of the OS. These are typically robust from a firmware perspective and have self-calibration routines upon power up, so if rebooting your phone doesn't solve the issue, it's likely not a calibration problem.
Based on your reported symptoms, it sounds more the like the focus sensor has malfunctioned and it keeps snapping around to find the focal point. I suppose it's possible it's a broken gyro or actuator (both are MEMS devices and relatively fragile) but the simple troubleshooting I would recommend is to make sure the camera lens is clean and that there is no dust or moisture underneath. If that doesn't work, I would do a factory reset to make sure there isn't a rogue camera app running on your phone. If all that fails, it's likely an unrecoverable hardware fault.
Plonko said:
The OIS is simply a 2-axis gyroscope and actuator built into the camera module. The camera module is a stand-alone subsystem with it's own firmware independent of the OS. These are typically robust from a firmware perspective and have self-calibration routines upon power up, so if rebooting your phone doesn't solve the issue, it's likely not a calibration problem.
Based on your reported symptoms, it sounds more the like the focus sensor has malfunctioned and it keeps snapping around to find the focal point. I suppose it's possible it's a broken gyro or actuator (both are MEMS devices and relatively fragile) but the simple troubleshooting I would recommend is to make sure the camera lens is clean and that there is no dust or moisture underneath. If that doesn't work, I would do a factory reset to make sure there isn't a rogue camera app running on your phone. If all that fails, it's likely an unrecoverable hardware fault.
Click to expand...
Click to collapse
I already did a full factory reset.. didnt help so far And the lens looks clean so far..
When i just shake the phone a bit for a while it gets a focused pic. (the gyro stops making these noisy sounds..)
But isnt there maybe a way, like in my first link to edit the build to prevent the gyro from starting?
I just try out if this (https://forum.xda-developers.com/xposed/modules/mod-jitterygyrofixforcardboard-t3202149) supposed to help
euphore said:
I already did a full factory reset.. didnt help so far And the lens looks clean so far..
When i just shake the phone a bit for a while it gets a focused pic. (the gyro stops making these noisy sounds..)
But isnt there maybe a way, like in my first link to edit the build to prevent the gyro from starting?
I just try out if this (https://forum.xda-developers.com/xposed/modules/mod-jitterygyrofixforcardboard-t3202149) supposed to help
Click to expand...
Click to collapse
If shaking temporarily gets it working again, than it is likely the actuator has debris in it that's causing it to jam. Being a MEMS device, it's prone to little pieces of the silicon chipping off which in turn get stuck in the actuation motor. I have some familiarity with the InvenSense gyroscope in the Fire phone, and while it has it's own quality issues, I never saw failures that resulted in the symptoms you are seeing.
Unfortunately, there aren't any consumer available tools I'm aware of to turn off the OIS portion of the camera module.
Edit: Forgot to mention, the UX gyro is completely separate from the OIS gyro. Two totally different chips. Turning off the UX gyro won't help your issue.
Just wanted to share this video with my issue: https://forums.androidcentral.com/ask-question/637735-camera-keeps-shaking-hardware-fault.html
Just to share my results.. there is a fix. Just put a little stripe of neodym magnet next to the lens and the gyro stops moving..
thats the cheapest solution tho

Categories

Resources