Develop Bugs

pls pls help my bricked ascend p6 pls pls

I tried to flash my p6 to B512 ROM, and I had changed my recovery, duno what is my recovery version now, but just cant install any new ROM.
Actually this is the first time i hit this problem and I hv really no idea how to proceed, i flashed successfully many times previously using twrp cwm or stock recovery, just dont know what happen this time, I know how to flash a new ROM from recovery anyway, just put dload folder with UPDATE.app inside in FAT32 sdcard, but it just not success during flashing, any expert can guide me, i really appreciate your help, I attached with a photo below, i stuck at here when reboot with USB plug in, and for your information my adb cant read my device

sasadeaunty said:
I tried to flash my p6 to B512 ROM, and I had changed my recovery, duno what is my recovery version now, but just cant install any new ROM.
Actually this is the first time i hit this problem and I hv really no idea how to proceed, i flashed successfully many times previously using twrp cwm or stock recovery, just dont know what happen this time, I know how to flash a new ROM from recovery anyway, just put dload folder with UPDATE.app inside in FAT32 sdcard, but it just not success during flashing, any expert can guide me, i really appreciate your help, I attached with a photo below, i stuck at here when reboot with USB plug in, and for your information my adb cant read my device
Click to expand...
Click to collapse
So first unplug your phone from your pc otherwise it won't work.
Than I had the same as you in the picture with the recovery 'stuck' but for it simply worked if I reboot straight again into recovery via the three buttons.
Hope I could help

hi
taaeem said:
So first unplug your phone from your pc otherwise it won't work.
Than I had the same as you in the picture with the recovery 'stuck' but for it simply worked if I reboot straight again into recovery via the three buttons.
Hope I could help
Click to expand...
Click to collapse
Hi, if i reboot without plug-in the usb, it will also fail like (attached photo124)

hm..tried to use a jb rom (b125/132)..maybe you flashed a jb recovery

blueIBI said:
hm..tried to use a jb rom (b125/132)..maybe you flashed a jb recovery
Click to expand...
Click to collapse
Different stock recovery only can install certain ROM? I tried B125 already cannot. Any other recommend ROM for me to try? I rmb I flashed a quite latest stock recovery

then try the b510 or the b634..
jb recovery can only install jb rom..so do kk recovery only install kk rom as i know..
if nothing brings success try the unicom rom..

blueIBI said:
then try the b510 or the b634..
jb recovery can only install jb rom..so do kk recovery only install kk rom as i know..
if nothing brings success try the unicom rom..
Click to expand...
Click to collapse
hi, my stock recovery is 4.4.2, and I just downloaded B634 ROM and tried to flash it, but the flashing fail......
stuck at this
ro.build.version.release = 4.4.2
ro.product.name = UEDGE
Current build version is not 4.2, dont need move.
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is UNLOCK state.

sasadeaunty said:
hi, my stock recovery is 4.4.2, and I just downloaded B634 ROM and tried to flash it, but the flashing fail......
stuck at this
ro.build.version.release = 4.4.2
ro.product.name = UEDGE
Current build version is not 4.2, dont need move.
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is UNLOCK state.
Click to expand...
Click to collapse
You still have your usb cable plugged in. It will NOT work like that. @taaeem has already mentioned that.
What was the previous firmware that you had installed?
If it was a Chinese firmware, you need to try flashing this file first: https://mega.co.nz/#!8kcVADpB!JKeDlX4WQhmAP3mclNTfIzIjVllw5sMhnrj-3KSpSc4

maybe the sdcard causes this error too..had this with a 16gb fuji card..with a 8gb noname it worked..
and unplug your phone before flashing..as mentioned..

miz_pimp said:
You still have your usb cable plugged in. It will NOT work like that. @taaeem has already mentioned that.
What was the previous firmware that you had installed?
hi miz_pimp, if i do not plug in the usb cable, it will directly go into fail as showed in the picture124 i attached below, I do not rmb what firmware i installed previously, but I did a full wipe, I do not think thr is still firmware inside beside stock recovery.
Click to expand...
Click to collapse

blueIBI said:
maybe the sdcard causes this error too..had this with a 16gb fuji card..with a 8gb noname it worked..
and unplug your phone before flashing..as mentioned..
Click to expand...
Click to collapse
I tried with different sdcard without usb plugged in, still giving me fail

very strange..
maybe you do a all again..
starting with flashing a stock boot.img and recovery.img (from the b512 rom..you can extract them by the update extractor from here..just search)..
then try to flash the b512 rom by the force update method (press and hold the buttons until you see the update process starting!)..
id this fails too..well..i don't know how to help then..
if there was a cn firmware on your device (as mentioned) then search for the unicom firmware and read how to flash this and do a eventually downgrade at first)..

blueIBI said:
very strange..
maybe you do a all again..
starting with flashing a stock boot.img and recovery.img (from the b512 rom..you can extract them by the update extractor from here..just search)..
then try to flash the b512 rom by the force update method (press and hold the buttons until you see the update process starting!)..
id this fails too..well..i don't know how to help then..
if there was a cn firmware on your device (as mentioned) then search for the unicom firmware and read how to flash this and do a eventually downgrade at first)..
Click to expand...
Click to collapse
i cant even flash my recovery, when i use adb, it just shows me waiting for device, then no response. I tried most of the ways but no one can help......

hm..what might help is that you install the device drivers again..i had in the beginning a similar problem..after reinstall of the device driver (there is a package by lesscro on this forum) my device was seen even in bootloader mode correct..

blueIBI said:
hm..what might help is that you install the device drivers again..i had in the beginning a similar problem..after reinstall of the device driver (there is a package by lesscro on this forum) my device was seen even in bootloader mode correct..
Click to expand...
Click to collapse
i reinstall the driver setup from lesscro, is still the same, nth works for me, I cannot change recovery cannot flash new ROM, everything just a mess

miz_pimp said:
If it was a Chinese firmware, you need to try flashing this file first: https://mega.co.nz/#!8kcVADpB!JKeDlX4WQhmAP3mclNTfIzIjVllw5sMhnrj-3KSpSc4
Click to expand...
Click to collapse
sasadeaunty said:
i reinstall the driver setup from lesscro, is still the same, nth works for me, I cannot change recovery cannot flash new ROM, everything just a mess
Click to expand...
Click to collapse
Have you tried the file that I linked to above?
I think your problem is that you flashed the incorrect recovery version for the firmware you had on your device.
Unless you used TWRP to completely wipe your device before you flashed your stock recovery (which was not at all necessary), then you should still have a firmware on your device.

miz_pimp said:
Have you tried the file that I linked to above?
I think your problem is that you flashed the incorrect recovery version for the firmware you had on your device.
Unless you used TWRP to completely wipe your device before you flashed your stock recovery (which was not at all necessary), then you should still have a firmware on your device.
Click to expand...
Click to collapse
hi miz_pimp, thank you so muchhhhhhhhhhhhh, I am able to recover my p6 with the firmware u linked to me. Really thank you and thanks for others too for helping me too. Thanks all.

Glad you got it sorted, and you're very welcome. [emoji2]

Back to stock...but no download mode!!!

Well, I´m on Cloudy 2.5, rooted and with TWRP. The thing is that, since 3-4 weeks ago, it´s impossible to get detected my LGG3 by different PCs, and i tried with different USB cables too...I install all kind of drivers too without results.
I´m thinking maybe it´s telephone micro USB what isn´t working, so i want to send my mobile to LG Technical Support, but i have to put all things back to stock to use warranty. I can´t go into download mode, so i can´t use flashtools to flash KDZ or TOT.
So other option is to flash a stock (.ZIP) rom from TWRP and then use flashify to install a stock recovery.img. Will this work to have a stock mobile and send it to LG?
If there were any option to flash a stock rom form TWRP, included stock recovery would be great, but i think is not possible.
SUMMARY: I need to go back to stock to use warranty, but using only TWRP or other apps like flashify...download mode and phone detection in PC impossible for now
Thank you in advance!!!

you need a full stock kdz file and download mode as far as I know...

f400 download mode doesnt work
Please help i have f400k and my phone stucked. I cant get into download mode. Please help.

I tried everything...but I still have "unknown device" on my computer...
There is no way to come back to stock for LG Technical Service? Maybe with a bumped rom flashed from TWRP and unrooted? Or LG T.S. will realize and i coulnd´t use my warranty?

OK...i only want to come back to stock to use warranty with LG service, but I have no download mode, so I´m thinking other method...will be possible this????
1.- Flash using TWRP a stock .ZIP kitkat rom
2.- Download a stock recovery 10A. (recovery.img)
3.- Finallly, flash stock recovery.img using flashify
will this work? is it possible to use flashify to restore stock recovery.img ?
If i could do that, i will recover my warranty again

help with ace ii firmware

ive lost my computer HD and lost a bunch of stuff. as for ace ii related things, ive lost mg2 firmware, temp root, samsung drivers, custom recoveries and roms. custom recoveries and roms arent much of an issue since ace2nutzer, chronomonochrome and sergeyl are still actively developing. as for stock firmware and temp root, i cant seem to be able to find a good download site (site that supports resuming/pausing)
id like to humbly request an upload for the barebone basics such as stock firmware, temp root, odin and all the other you-need-these-to-install-custom-rom stuff to an easy to use download service (like google drive)
*EDIT*
my phone is currently out of order and it seems i need to reflash using odin. i was using ace2nutzers cm11 and ran into some issues. then i tried flashing chronokernel 4.4.2 when trying to upgrade to ace2nutzers more recent cm11 build, but im facing philz recovery error 'status 7' when trying to flash anything. it is currently systemless, with only recovery mode (philz) and download mode working
*EDIT2*
in philz it is stating my internal storage as sdcard1 and not 0. my external is called sdcard0

If you have ace2nutzer's kernel, install it by recovery, power off and boot on recovery again.
Then install the ROM you want.
I've never faced status 7 error with CWM recovery 6.0.5.0 of this kernel.

me too, only TWRP didnt work once, and chrono admitted it was a bug he couldnt fix.
i opened up the rom on my friends PC and it turned out it was a corrupted archive. CWM flashed it anyways and that was why i lost the OS. i dont understand why i couldnt just reflash a newly downloaded and checked archive but that too didnt work. i also tried installing the kernel again, rebooted and tried installing the rom again and nope. then removing the whole assert thing under updater-script, it only worked once when installing a kernel. annnd finally after a sleepless night i tried adb sideloading and fastboot recovery, it was a bad decision as now even recovery mode doesnt work -.-
theres a good thing though, download mode still works. im hoping someone can upload a stock rom somewhere safe. i read but dont understand why people say mg2 is preferred.

Mg2 is the newest base band but for your target it doesn't matter right now.
What model do you have, 8160 or 8160P with NFC?

sorry for the late reply, I needed something to get my mind off my old friend
its a standard ace ii, non P/L version

fonzacus said:
sorry for the late reply, I needed something to get my mind off my old friend
its a standard ace ii, non P/L version
Click to expand...
Click to collapse
Just install by Odin Russian gingerbread following instructions from YouTube video below.
After this, you'll have the phone like a brand new taken from the factory (at least the firmware).
Then, install any jelly bean stock you want.
And finally you can install the custom ROM you want.
Download Russian gingerbread from this link:
https://www.dropbox.com/s/3okawqmw8gbazns/I8160XXLK6.rar?dl=0

huge kudos, its all running just fine again with ace2nutzers cm11
im hoping dropbox wont die/expire

fonzacus said:
huge kudos, its all running just fine again with ace2nutzers cm11
im hoping dropbox wont die/expire
Click to expand...
Click to collapse
Don't worry about that, I uploaded this Dropbox link and I probably won't retire it for a long time.
This is the only 3 part stock firmware for GT-i8160 and it's the only ROM that can repair almost anything we "do" the phone.

[GUIDE] [HOW-TO] Downgrade to 5.1.1 lolipop

So......first of all lets clear something out: nougat is fine. marshmallow is fine. even the first firmware that was ever released on the s6e+ was fine. But if for whatever reason you would want to downgrade to lolipop heres how:
WHAT YOU ARE ABOUT TO DIVE INTO INVOLVES HARDCORE BOOTLOADER MODS AND FLASHING SAMSUNG ENGINEERING FILES. PROCEED AT YOUR OWN RISK. NO ONE (INCLUDING ME) WILL BE RESPONSIBLE FOR ANY DAMAGE TO YOUR OWN PHONE.
So......downgrading to lolipop...... some ppl claimed it can be done by deleting some file in the odin .tar but that never worked for me.
If you have the sw rev check fail error upon downgrading....this is the guide for you
This will wipe all your data including internal storage (depending on how you do it)
Confirmed working on 2 g928f devices (one of em is mine) should* work on g928c but cant make any promises
disadvantages:
1. You cannot boot twrp while on the downgraded bootloader (still working on that tho)
2. You will only have system-wide root. DO NOT flash systemless or it will not boot (also rip safetynet)
3. Fingerprint is not working (still working on that)
4. You can only flash stock nougat or stock marshmallow from odin. You cannot flash lolipop tar,twrp tar,cf auto root tar or anything else
Instructions:
1. Wipe /data /system and /cache in twrp
2. Download this lolipop rom i cooked up in a few mins or any other lolipop rom (but this is tested as working w this method) and flash it (dont mind the supersu flash in the rom. it doesnt work. flash this supersu)
3. Download and flash this supersu (optional)(depends if u want root)
4. FLASH ALL OTHER MODS NOW BCUZ U CANT BOOT IN TWRP BACK LATER
you can try to boot but it wont. You need a bootloader
5. reboot in download mode and flash this modified bootloader
6. boot in stock recovery,wipe,cross fingers and hope it boots
If u ever wanna go back to nougat just flash stock .tar and no issues from there
Huuuuuge credits to @lucastanciu
The guy stayd a few hrs in a constant bootloader fkup to made this happen and has made a huuuuge contribution so that this guide could be possible and as safe as it is

HOW-TO:
Flash something (a mod for example) AFTER you flashed the rom and modded bootloader
flash this stock bootloader in bl tab
at the same time flash in ap the twrp tar.
boot into twrp flash whatever y need to flash
flash back from odin the modified bootloader

"I dont have a g928f or g928c
Can you mod a bootloader for me?"
Well.........depends....... if im bored yea i like to help ppl
Just give me ur model number and i will try to make one for you. No promises tho

U forgot to mention that this 5.1.1 lollipop is faster than any rom. With this rom i got the fastest boot time ever! I recommend u to try this rom ))

Deal with the g928g

Gracias very good onli necesari recovery

You deserve a ten, but please fix it to get into recovery and do not put tatas red letters that scare jaajajjaja good eunsaludo from spain

my batery life its worst than my life ))

djpaul2 said:
my batery life its worst than my life ))
Click to expand...
Click to collapse
Ah yes. If you rooted then you have the deep sleep issue. This was an issue even with the original 5.1.1 it was fixed by flashing a custom kernel buuuut since we cant do that......... we just have to deal with it

is this work on note5 n920c ?

rainbow_dash said:
"i dont have a g928f or g928c
can you mod a bootloader for me?"
well.........depends....... If im bored yea i like to help ppl
just give me ur model number and i will try to make one for you. No promises tho
Click to expand...
Click to collapse
sm-n920t oj5

Rainbow_Dash said:
So......first of all lets clear something out: nougat is fine. marshmallow is fine. even the first firmware that was ever released on the s6e+ was fine. But if for whatever reason you would want to downgrade to lolipop heres how:
WHAT YOU ARE ABOUT TO DIVE INTO INVOLVES HARDCORE BOOTLOADER MODS AND FLASHING SAMSUNG ENGINEERING FILES. PROCEED AT YOUR OWN RISK. NO ONE (INCLUDING ME) WILL BE RESPONSIBLE FOR THE ANY DAMAGE TO UR OWN PHONE.
So......downgrading to lolipop...... some ppl claimed it can be done by deleting some file in the .tar but that never worked for me.
If you have the sw rev check fail error upon downgrading....this is the guide for you
This will wipe all your data including internal storage (depending on how you do it)
Confirmed working on 2 g928f devices (one of em is mine) should* work on g928c but cant make any promises
disadvantages:
1. You cannot boot twrp while on the downgraded bootloader (still working on that tho)
2. You will only have systen-wide root. DO NOT flash systemless or it will not boot
3. Fingerprint is not working (still working on that)
4. You can only flash stock nougat or stock marshmallow from odin. You cannot flash lolipop tar,twrp tar,cf auto root tar or anything else
Instructions:
1. Wipe /data /system and /cache in twrp
2. Download this lolipop rom i cooked up in a few mins and flash it (dont mind the supersu flash in the rom. it doesnt work. flash this supersu
3. Download and flash this supersu (optional)(depends if u want root)
4. FLASH ALL OTHER MODS NOW BCUZ U CANT BOOT IN TWRP BACK LATER
you can try to boot but it wont. You need a bootloader
5. reboot in download mode and flash this modified bootloader
6. boot in stock recovery,wipe,cross fingers and hope it boots
If u ever wanna go back to nougat just flash stock .tar and no issues from there
Huuuuuge credits to @lucastanciu
The guy stayd a few hrs in a constant bootloader fkup to made this happen and has made a huuuuge contribution so that this guide could be possible and as safe as it is
Click to expand...
Click to collapse
Hello champion I propose something that would be very interesting develops a boot loader that is worth at the same time for 5.1.1 / 6.01 and 7.0 at the same time would be the cane, well it is only an idea, if you carry out all the World would install it safe thanks for your work champion mil I like
:bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno::bueno:
everything is possible

Is this also working on G928S ( Korean SKTelecom Model) ? I was already broken Knox.

you can make this for S6 SM-G920i/F ? PLEASE :C

please upload the boot manager again thanks

Hi
There is no file to download, the link is dead
Can you upload files again
Thanks

Links dead

eriktirador said:
Links dead
Click to expand...
Click to collapse
Quick!
Somebody do CPR

What?

Rainbow_Dash said:
Quick!
Somebody do CPR
Click to expand...
Click to collapse
lmao
Sent from my Note 5 using XDA Labs

Pie root, twrp fail, odin fail and Emergency Recovery Function

Hi, community
I tried to root my SM G-9600 but it all went wrong. First i went on twrp, it worked, but wiped my entire data. Then i tried make a factory reset o installation with odin and the latest firmware for my device, but it failed and showed this message labeled in red color: "sw rev check fail device 4 binary 3 error". then i found in this and other forums that it was because i used not the latest firmware. I downloaded the latest one, tried once to flash it via ODIN, and it failed again. Then when it restarted this message was shown : " An error has occurred while updating the devide software. Use the Emergency recovery function in the Smart Switch PC software. I donwloaded the smart switch, installed it, plugged my devide, but it shown that my device was "Unsupported". IDK what to do by now, so i need help from anyone on this forum. PLS
Greeting from Peru.

i had the same problem
(before processing to the next step try to redownload the firmware, i think i was using an old firmware and this is why i got this error)
i am assuming that you can not boot on twrp recovery
that's not a problem , you need to install twrp via odin and boot directly to it....
format the data and connect to your laptop (if it does recognize the phone but there is no storage dont worry, just reboot again to recovery (there is an option on reboot tab))
since you already tripped the knox just flash a custom rom, boot and set it up, and then try to flash stock image via odin as normal.
and sorry for my bad english.

Cant install a custom rom
Thanks. I made posible the TWRP installation, root, but i cannot install any custom rom i have. Can you suggest any one that will be suitable for my device (SM G-9600) ?, thats Samsung Galaxy S9 g9600 (Snapdragon SoC)

dimitrispas22 said:
i had the same problem
(before processing to the next step try to redownload the firmware, i think i was using an old firmware and this is why i got this error)
i am assuming that you can not boot on twrp recovery
that's not a problem , you need to install twrp via odin and boot directly to it....
format the data and connect to your laptop (if it does recognize the phone but there is no storage dont worry, just reboot again to recovery (there is an option on reboot tab))
since you already tripped the knox just flash a custom rom, boot and set it up, and then try to flash stock image via odin as normal.
and sorry for my bad english.
Click to expand...
Click to collapse
Thanks. I made posible the TWRP installation, root, but i cannot install any custom rom i have. Can you suggest any one that will be suitable for my device (SM G-9600) ?, thats Samsung Galaxy S9 g9600 (Snapdragon SoC)

Stevie1997 said:
Thanks. I made posible the TWRP installation, root, but i cannot install any custom rom i have. Can you suggest any one that will be suitable for my device (SM G-9600) ?, thats Samsung Galaxy S9 g9600 (Snapdragon SoC)
Click to expand...
Click to collapse
do you want to install a custom rom or revert back to stock?

For custom ROM I suggest Soldiers ROM here's the link to the thread. https://forum.xda-developers.com/ga...g96xf-fd-n-stock-rom-soldier9312-1-0-t3771346 . You can more information about it on the thread. Been using the moment I rooted my phone.

Xspidera said:
For custom ROM I suggest Soldiers ROM here's the link to the thread. https://forum.xda-developers.com/ga...g96xf-fd-n-stock-rom-soldier9312-1-0-t3771346 . You can more information about it on the thread. Been using the moment I rooted my phone.
Click to expand...
Click to collapse
i think he is out of lack it looks like he doesn't know exactly his model snapdragon samsung devices are different from our g960f exynos version and it may brick his device
i think hes only option is to flash the stock firmware and yea just that....