Greetings here's my problem. I have General Mobile 4G with Dual Sim.Recently i tried crackling twrp and cm 13 official.The cellular network worked without problem.There was 2 sim slot and it was getting LTE. Then i wanted to turn to stock seed rom. After the boot and install section on my device i can see 2 sim slot but i cant get any cellular network. I can make and receive messages,calls. If i install Single Sim stock rom, then it receives cellular net. Please help me about this
Related
Hello,
Today I flashed a rom from http://forum.xda-developers.com/note-2-tmobile/development/rom-team-ub-rom-t0lte-t2974731 and it killed my network. Before flashing I was able to get a signal to T-mobile's network (calling, texting and data). After update, it couldn't find the cellular network (stuck on the screen looking for a network). Going into settings to auto-register on the network also didn't work and getting the message "error when searching for networks". Then I tried to flash stock with odin but it didn't work, gets errors of writing on boot.img and system.img using the stock roms for Jan 16, 2013.
My phone is Note 2 (SGH-889V). originally T-mobile, Wind (Canada) on T-mobile sim.
Please help.
My friend brought an original refurbish Samsung N910v android version 5.01 which was working with GSM 2G if not 3G until when I tried to update to new version android v6.0.1. In the menu>setting>about when I checked first before anything it showed me N910 F v5.01 but in boot mode Odin it was N910v.The problem started when I just typed *#9090# the phone immediately started reboot loop. I have managed to unlock the boot loader and root the phone installed custom rom version 6.0.1 by Paul Pizz rom VRU2CPJ2.r-1 but still can not have 2G or 3G GSM network. Please help to revive the phone again whether it meant to go back to 5.0.1 that would work with gsm cause am full stack now.
Have you checked to ensure you have the APN information in place? I have a Galaxy Note 4 N910V now (just got it a few days ago) and when I put my T-Mobile SIM in it from the very first time I have to manually put in the APN data - on custom ROMs it's usually picked up and there automagically but not always so, my suggestion is that you check to make sure your APN information is currently there as it should be.
Settings - More - Cellular networks - Access Point Names - make sure the one you need to be using is selected and if it's not then you'll have to put that info in manually and save it.
As for the actual model number, take the battery out and see what the model number is on the sticker in the battery compartment area - if the sticker isn't there then it could be a device that someone has done some experimenting with because that info can be changed. The sticker should be there, of course, but sometimes people take 'em out when they're mucking around with stuff, who knows.
Initially the phone is from Verizon but was working on 2G ,3G GSM network with N910F firmware version 5.0.1.it was working on airtel network until when I wanted to update. May I have the Apn settings,please
gruka said:
Initially the phone is from Verizon but was working on 2G ,3G GSM network with N910F firmware version 5.0.1.it was working on airtel network until when I wanted to update. May I have the Apn settings,please
Click to expand...
Click to collapse
The APN will be your network. Are trying to use Verizon? If so, you should have a spot to tic the VZWINTERNET. If not, then you have a sim card issue.
ziggy the how do i sort out the sim card issue ,Since phone says this sim card is not from verizon
gruka said:
ziggy the how do i sort out the sim card issue ,Since phone says this sim card is not from verizon
Click to expand...
Click to collapse
Is the sim from verizon? If you have a good account go to a corporate store and have them give you a new one. It's free.
Also, what are your APN settings and I will compare to mine. Everything works on mine.
the fone I have came from china ,am in Africa and remember I told you it was working woth N910f firmware version 5.0.1.All am asking is there anyway I could make this fone work again on Gsm network, cause all it says after re flash is the card is not from verizon
I now rooted this n910v android version 5.1.1 still no network, am in Africa where there is 2G&3G GSM network, how would I make this fone to work again with the gsm network now that I rooted. On the network bar I get a circle with a cross ,how to make this work
gruka said:
I now rooted this n910v android version 5.1.1 still no network, am in Africa where there is 2G&3G GSM network, how would I make this fone to work again with the gsm network now that I rooted. On the network bar I get a circle with a cross ,how to make this work
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=457095661767122226
- N910VVRU2CPJ2_FullFirmware_NoAboot<--- Full Framework with no aboot so you will not re-lock bootloader, but will unroot and restore back to 100% stock. once your on the full stock check if your connections are working fine, if they are then install custom rom, otherwise change the sim card
go in settings, connections and select network mode to global, should be fine
Please my G928T (unlocked) using internationaly, suddenly cannot no longer receive 3G network, can only reveive 2G/Edge. Once i set it to 3G only, the network will go and I will be off Network. But 3G use to work before now.
I have flashed the default most recent firmware (G28TUVU4DQC2) from sammobile yet it didn't work.
Pls I need help.
Thanks
Hi, I'm in the same situation, did you find a solution?
sunnycee said:
Please my G928T (unlocked) using internationaly, suddenly cannot no longer receive 3G network, can only reveive 2G/Edge. Once i set it to 3G only, the network will go and I will be off Network. But 3G use to work before now.
I have flashed the default most recent firmware (G28TUVU4DQC2) from sammobile yet it didn't work.
Pls I need help.
Thanks
Click to expand...
Click to collapse
Have you tried changing SIM Cards?
What about booting to recovery and performing a factory reset?
Good morning, I am running the latest Lineage 14.1 rom (14.1-20171204-Nightly-d2att) on the Samsung Galaxy S3 (SGH-I747) phone, this phone is rooted, running the latest TWRP (3.2.1.0) and the I747UCUFNJ2 baseband on this device, this device is fully rooted, and is SIM unlocked for use with any carrier, my carrier is T-Mobile.
Ever since installing this rom, and any roms higher than android 6.0 (I've ran CM 12, CM 12.1, CM 13, SlimKat, and AOSP roms), everything works perfectly except for my cellular data will not go higher than Edge (2G) and my complete cell connection will randomly disconnect for a few seconds then reconnect itself.
I've tried everything from changing the APN settings specified by T-Mobile for LTE connectivity, I've gotten a replacement SIM from T-Mobile, I'm lost at this point as to what the issue could be. According to T-Mobile I do have the BYOD option so unlike some carriers, the SIM is not supposed to be locked to a specific IMEI.
Does anyone have any idea what could be the issue and/or a solution to this? Is there a higher baseband that needs to be loaded to fix this that I'm not aware of?
Thanks for your help everyone.
The phone is also running the latest bootloader?
Yes it is.
I assume the cellular data works properly with a stock ROM.
Does the cellular data work with the sim in another phone? Cellular data works with another sim card in the s3?
try *#*#4636*#*#
Pigoath said:
try *#*#4636*#*#
Click to expand...
Click to collapse
connection problem or invalid MMI code
edit:nvm i got it working with *#*#4636#*#*, what can i don this menu to get lte running
How can I improve my network quality,
As I saw 3g network of same carrier in my custom ROM and 4g network of same carrier in others standard phone?
Joybiswas19 said:
How can I improve my network quality,
As I saw 3g network of same carrier in my custom ROM and 4g network of same carrier in others standard phone?
Click to expand...
Click to collapse
(Take a Backup before doing anything)
First of all check check your base band version (Phone Settings-> Info)
if you are not on the latest version(2 different versions Chinese or Indian).
i not i would suggest you to download any version of your choice and then flash it.
once you are done with all of that. now comes the main part.
you have to now enable volte on the stock rom and try using it for 5- 10 mins and check if u get 4g network, else check you sim card to see if it is 3g or a 4g sim.
if a 3g sim, then just get the sim upgraded. (should consider doing this first). else you would have seen 4g network,thats all . follow all steps to root and unlock the bootloader.
Thats all any rom you would have 4g