Huawei watch stuck on 1.3 - Huawei Watch

Hi, hoping I could get some help.
I just got a huawei watch and cannot get it to update. It is on version 1.3xxxx. When I try to update it, it says it's already the latest version. Hopefully I'm just overlooking something very obvious as right now I feel stuck in the mud. Thanks for your help in advance!

Same issue here! Own the watch from 4 days now.

Same for me
An idea ?

Ok, i updated my watch with success. I believe that the OTA don't work because my watch is a refurbished one and the OTA system think that my watch is already up to date.
Here's how to update, it's easy:
You have to do an adb sideload of the OTA files:
Tutorial here:
http://phandroid.com/2016/03/02/huawei-watch-marshmallow/
You have to flash this file first if you are stuck in LCB43B:
http://android.googleapis.com/packa...866b47.signed-sturgeon-MEC23L-from-LCB43B.zip
After the reboot, continue with:
https://android.googleapis.com/pack.../6bae896422cb963c01b479eea9838f1b1b0d705e.zip
After that update the OTA worked normally.
Hope this help.

Thanks for starting this thread! I think all the people stuck on older firmware are Canadians with refurbs from newegg (incl me)? However, I am not sure how being refurb has anything to do with it.
My watch did update once from the version it came with, but kept on saying its up-to-date after that. I guess flashing stock image is the only way to go.

jainanshal said:
Thanks for starting this thread! I think all the people stuck on older firmware are Canadians with refurbs from newegg (incl me)? However, I am not sure how being refurb has anything to do with it.
My watch did update once from the version it came with, but kept on saying its up-to-date after that. I guess flashing stock image is the only way to go.
Click to expand...
Click to collapse
The issue with flashing the stock image is that you have to unlock the bootloader, and after that it seems that you loose the warranty.
Better flashing OTA if you want to stay stock. I bought my refurb from newegg.ca too.

ndompierre said:
Ok, i updated my watch with success. I believe that the OTA don't work because my watch is a refurbished one and the OTA system think that my watch is already up to date.
Here's how to update, it's easy:
You have to do an adb sideload of the OTA files:
Tutorial here:
http://phandroid.com/2016/03/02/huawei-watch-marshmallow/
You have to flash this file first if you are stuck in LCB43B:
http://android.googleapis.com/packa...866b47.signed-sturgeon-MEC23L-from-LCB43B.zip
After the reboot, continue with:
https://android.googleapis.com/pack.../6bae896422cb963c01b479eea9838f1b1b0d705e.zip
After that update the OTA worked normally.
Hope this help.
Click to expand...
Click to collapse
Same problem.
Then I took your advice and it worked out great, and without changing the bootloader, thank you so much ndompierre :good::victory:

I got my newegg refurb yesterday and could not force the OTA despite resetting and checking multiple times. This afternoon it updated to marshmallow.
Each time time it reboots, I check for updates. I am currently receiving my fourth update of the day.
I guess each security patch has to be downloaded separately. I'm up to August so far..

Related

Regarding OTA Updates...

I'm new to rooting but I rooted my EVO in June via a link posted of HTCEVOHACKS.COM and I continue to get a message to do the OTA updates. When I try to click yes it downloads but the files are then corrupted and when they try to install the phone shows a picture of the EVO and a red question mark, then it shuts off. Am I not able to get OTA updates with the EVO rooted? Since it is a new phone I would like to get some updates when glitches are found. I also want to get the FROYO update on Tuesday when Sprint releases it. Any help on how to continue to stay rooted and get updates or how to get FROYO when released by my carrier would be awesome. Again, I'm now to this so if this process could be explained in simple terms, that would help too.
Go to the dev section and download the rooted Froyo update, flash it just like any custom rom. Read in the OP it will tell you what to do and what order to do it in, presto you have all updates and still have root.
Thanks. I'm going to try that now. I guess I didn't realize that you couldn't get OTA updates after you rooted your phone.
cja1984 said:
Thanks. I'm going to try that now. I guess I didn't realize that you couldn't get OTA updates after you rooted your phone.
Click to expand...
Click to collapse
You NEVER want to take an OTA after you root your phone. Most Roms will block them out now. Why you ask? because it will unroot you and then you have to wait and see when/if will be rootable with the new patch which can take a while.
So always check for updates int he dev pages for roms using the new patches when they come out, never take an OTA if you are asked, and enjoy your root
cja1984 said:
I'm new to rooting but I rooted my EVO in June via a link posted of HTCEVOHACKS.COM and I continue to get a message to do the OTA updates. When I try to click yes it downloads but the files are then corrupted and when they try to install the phone shows a picture of the EVO and a red question mark, then it shuts off. Am I not able to get OTA updates with the EVO rooted? Since it is a new phone I would like to get some updates when glitches are found. I also want to get the FROYO update on Tuesday when Sprint releases it. Any help on how to continue to stay rooted and get updates or how to get FROYO when released by my carrier would be awesome. Again, I'm now to this so if this process could be explained in simple terms, that would help too.
Click to expand...
Click to collapse
Just in case you have come trouble finding it Ill paste the link.
http://forum.xda-developers.com/showthread.php?t=740520
You definitely dodged a bullet with this one. If the OTA would have worked, you would have lost root and been stuck unless/until somebody figured out a way to root Froyo. Consider yourself lucky.

[FIX] ++++ bell users 3 button combo fix!!!!!!!!!!! +++++

http://www.facebook.com/note.php?note_id=10150262535205538&id=260085296049
It says it will wipe everything. So a complete backup is needed.
I am still quite new to this. Forgive me, but what is the BEST way to back up EVERYTHING -- including apps and contacts and SMS etc.
I have Titanium Back up Pro (and im rooted) though I haven't really used it yet -- is this the best ?
Is there any good apps out there ? Any good programs I should know ?
I just saw this too. Unfortunately, I've upgraded to JH2. The facebook post says you need JG9.
We can use this post for our flash guide using Kies:
http://forum.xda-developers.com/showthread.php?t=766589
Now... how can we locate a JG9 firmware image? I cannot find it on samfirmware. I guess we'll need to flash back to get this update.
I'll update my post when I find information, but feel free to post how we can get back to the JG9 firmware if I'm off base.
- Titanium backup is good to backup apps and data.
- I've used SMS Backup and Restore to backup SMS.
- Contacts are backed up by Google itself as is the calendar.
- APN data might have to be re-entered manually. There is an APN backup and restore as well.
- I'm not sure if call log data can be backed up and restored.
Too late for my phone
but great news
I find titanium hard to use, undestand and unreliable. Mybackup pro is waaaay better.
Is it just me or didnt my phone update to that firmware weeks ago when I got the thing... Some fix Samsung, thanks alot for wasting the last 2 weeks of my life waiting on you to come up with a resolution.
Please someone tell me im wrong... lol
If you have attempted to resolve the three-button recovery issue by upgrading the device to JH2 using a version of Kies earlier than 1.5.110074_45 and the recovery procedure is not working, please visit a Bell authorized dealer to have the device returned to a Samsung authorized service centreto have the issue resolved.
WHAT ?????
I installed JH2 via Kies something like 2 weeks ago. 3 button recovery/download is still not working. The Facebook page helpfully recommends taking it back and getting it serviced, but I think I'll wait until it's bricked.
I guess our only hope is for someone to tell us how to safely downgrade..
Dawgplg said:
Is it just me or didnt my phone update to that firmware weeks ago when I got the thing... Some fix Samsung, thanks alot for wasting the last 2 weeks of my life waiting on you to come up with a resolution.
Please someone tell me im wrong... lol
Click to expand...
Click to collapse
Just downgrade to JG9 then do the update.. its a different version of JH2 that is up for download via KIES it updates the SPL. were the old one didn't
Im hoping someone can get KIES to downgrade to JM9, so that we can update to JH2 using the supposed new version of KIES. Dont really see how this will make any difference, but heres to wishful thinking.
Any idea how I can go about getting the JG9 firmware?
Does anyone have a download link for JG9? Pretty sure you can get kies to flash any rom you want by fiddling with the registry.
this is awesome news. im still on the stock firmware. ive been scared to update to ANYTHING due to this problem. i havent even rooted the thing.
im gonna wait and see what the results are for other people before i do this too. maybe im paranoid but it doesnt hurt to be patient i guess.
TriC_101 said:
Just downgrade to JG9 then do the update.. its a different version of JH2 that is up for download via KIES it updates the SPL. were the old one didn't
Click to expand...
Click to collapse
Sorry was trying to quote you.. Anyway Id love to get back to the previous firmware, Any idea how to go about that? Ive seen people redirect KIES to other Firmwares, ie the new Froyo build, but havent seen anything to go back.
Hmm...
This "new" JH2 which should fix the "3-button combos" is a low package.
Maybe Kies (Odin SS_DL) is able to update the bootloader, because Odin does not seem to be able to do it.
If someone wants to try it with Odin, I can upload the file.
evil-doer said:
this is awesome news. im still on the stock firmware. ive been scared to update to ANYTHING due to this problem. i havent even rooted the thing.
im gonna wait and see what the results are for other people before i do this too. maybe im paranoid but it doesnt hurt to be patient i guess.
Click to expand...
Click to collapse
Hey man I am with you I think. I haven't done NO upgrades or firmware updates. Why? b/c I can't get Keis to work
So I'm still on stock.
My phone says this:
Original Production Software:
PDA: I9000UGJG9
PHONE: I9000UGJG9
CSC: I9000BMCJG9
I've only rooted my phone and used the 1-click-lag-fix
So questions -- once I upgrade my phone via Keis do I have to re-apply 1-click-lag-fix ?
do I have to un-root my phone before I upgrade via Keis ?
Thanks guys
@richthofen
Does this mean it is definitifly a software issue or could it still be an hardware issue since the older stock firmware can be updated and the newer roms can not..
Fishie said:
@richthofen
Does this mean it is definitifly a software issue or could it still be an hardware issue since the older stock firmware can be updated and the newer roms can not..
Click to expand...
Click to collapse
Its software and it has been all along.. its the SPL Boot-loader... all they have done is get KIES to flash the boot loader this time.. in the past when you changed roms the bootloader was not changed.. now this flash with update the boot-loader with the fix..
Hmm, I updated a few weeks back to JH2. Its been running fine, but having that 3 button ability would give me more peace of mind. They suggest bringing it to a dealer for warranty replacement/repair if we've already upgraded - seems a bit excessive. I'm wondering if this "bootloader" alteration will be included in future firmware updates perhaps? Like froyo (hopefully in a few weeks)? If that's the case, I'll just wait for that instead of trying to flash back to JG9, then back forward to the "new" JH2.
Any word/thoughts on if this bootloader thing is a one-time deal from JG9 to new JH2 only?
- Goatblaster
I would assume that most people that want the 3-button fix are the kind of people that upgraded to JH2 as soon as it was available and thus with a version of kies "prior to 1.5.110074_45". Therefore most people will fall into the category where they must return the phone for service as explained in samsung FB note.
This is bizarre... even if the new firmware is the same as JH2 except for the low level stuff, they could have given it a new name just to allow kies to upgrade it. Instead they are explicitly telling us to send the phone back! It really looks like they are shooting themselves in the foot. Why not tell us to wait one week for Froyo and get the new boot loader + froyo at the same time. Returning it to Samsung will take much longer.
Also, there are a lot of users who did upgrade to JH2 using the latest Kies, and not one of them has emerged saying it fixed the 3-button issue.
Either Samsung has failed big time on this, or the statements on FB are not legit.

Cannot update HTC M8. Tried everything. HELP!

First of all, I'm sorry if this has been solved before or I if am too imcompetent to do this. I'm having an imported taiwanese version CID HTC__621 and running the stock 1.54.709.12 4.4.2 rom and with hboot 3.16 and am S-On. My bootloader is also unlocked. In short, I am trying to update my M8 to 4.4.3 but to no avail, I got the red triangle. Having checked the log, I found that I had the KKbox_android.apk and who knows what else missing. I've searched high and low by visiting many threads and even tried to extract the apk from the update package to put in the data/preload/ folder. I've also been to obscure taiwanese threads and, ultimately, come to a dead end with the unexpected content message.
Other than that, after an entire day's worth of searching and hundreds of tabs opened as well as too many files to count downloaded and deleted, I am back to square one. Having tried relocking the bootloader and flashing the ruus, installing the stock nandroid backups, trying to flash the firmware from the update package and getting the 12 signature very fail and the 99 unknown fail messages and trying all other alternatives, I am still stuck at the same place.
The only reason why I hadn't updated before was because I wanted to get S-Off. However, after months of waiting, I got greeted with the disheartening message that firware was dead. And I don't think I'd like to dish out $25 for sunshine. I simply want to update to 4.4.4, in which I have to go through 4.4.3 first when updating through OTA to install the Skydragon rom. Neither can I get any other custom roms because they all need higher hboot versions. I also couldn't find any hboot standalone files which I doubt would work. I'm sick of sense and I really can't stand it any longer.
So does anyone have the apks or any other methods? As I am really out of ideas. I've wasted so much of my time trying to get this thing to update I don't even know what I'm doing anymore. And, did I mention before? I'm really sick of sense. I've never had this much of a hassle to install a custom rom on any other phones. In fact, they all went well the first time and this is the only phone I've had that's so adamant to change. It really does look like the best phone of 2014 is also the most troublesome phone of 2015.
Sorry for the long post.
Hey stop crying and spend the money it will not charge you if it doesn't work so...if it works then do
The Super Cid 11111111... And your troubles will be done..
Problem is... I don't have a credit card yet and I don't think my dad would be to happy to pay for it.
BloodCreams said:
Problem is... I don't have a credit card yet and I don't think my dad would be to happy to pay for it.
Click to expand...
Click to collapse
Read this : http://forum.xda-developers.com/showpost.php?p=54598052&postcount=1516
Skip step 10, 11 & 12 but do software update checking (repeat step 9) because there are more OTA to install up to the latest lollipop 4.19.709.2
If you're not sure what to do, contact me on Wed, I'll be home by then.
I have all the files needed.
ckpv5 said:
Read this : http://forum.xda-developers.com/showpost.php?p=54598052&postcount=1516
Skip step 10, 11 & 12 but do software update checking (repeat step 9) because there are more OTA to install up to the latest lollipop 4.19.709.2
If you're not sure what to do, contact me on Wed, I'll be home by then.
I have all the files needed.
Click to expand...
Click to collapse
Thank you so much man. You're a lifesaver. The nandroid worked like a charm!

Still on 6.0 oct 1st 2015 firmware

Hey, just bought brand new 5x and I'm still on 6.0 with oct 1sr 2015 security patch. When I go to system updates it says I'm up to date. Am not getting OTA update automatically. Im on Telenor in Serbia. Should I wait or do I have to root and flash the latest update manually?
Btw, looove the handset and OS is lagfree, no issues, but still wonder why I'm not getting the latest update. No root, LB, brand new OTB device.
5ageman said:
Hey, just bought brand new 5x and I'm still on 6.0 with oct 1sr 2015 security patch. When I go to system updates it says I'm up to date. Am not getting OTA update automatically. Im on Telenor in Serbia. Should I wait or do I have to root and flash the latest update manually?
Btw, looove the handset and OS is lagfree, no issues, but still wonder why I'm not getting the latest update. No root, LB, brand new OTB device.
Click to expand...
Click to collapse
to update it manually u don't need to have root access.
But if u like to try some new 3rd party ROMs root it :good:
Geeks Empire said:
to update it manually u don't need to have root access.
But if u like to try some new 3rd party ROMs root it :good:
Click to expand...
Click to collapse
How do I update manually? Any recommended guides? I dont feel the need to flash a custom rom, I like what google is doing with android as is for now. Just want the lates and greatest, thats why I bought a nexus.
Also would like to know the reason why I am I not getting updates automatucally. I have the international H791 model. Firmware version MDA89E. Its two OTAs outdated.
Quick thought: Shut down, remove SIM, Start the device, Connect to Wifi, Check for updates.
Just unboxed a brand new 5X 10 minutes ago and have the exact same problem...
Tried to reboot and added a Google account, charged the battery to 100% but the thing still won't find a new system version...
marioemp2k7 said:
Quick thought: Shut down, remove SIM, Start the device, Connect to Wifi, Check for updates.
Click to expand...
Click to collapse
Tried that too. I activated the device without the SIM and used it that way yesterday, inserted it just today.
Than I guess you can't do anything else unless you unlock the bootloader. At this point you can fastboot \system \boot \radio \vendor from the latest factory image or you can sideload ota zip through stock recovey.
I am having the same issue, my new nexus 5x is on 6.0 MDB08L, securiry patch level: November 1, 2015.
When I check for updates it says that my device is up to date...
The OTA will show up eventually. Or update manually.
Same thing for me in Canada. I just ended up enrolling in the Android Beta to get N preview.
Issue solved!
I got a ton of OTAs overnight while device was charging. I think it was 5 OTAs one by one that had to be installed separately, now I am on the latest April security patch and loving my nexus even more. No noticable performance difference, smooth and snappy and now up to date. So I guess updates will come you just have to be patient so google can activate them for your device. In my case it was 2 days since activation.
Info
5ageman said:
How do I update manually? Any recommended guides? I dont feel the need to flash a custom rom, I like what google is doing with android as is for now. Just want the lates and greatest, thats why I bought a nexus.
Also would like to know the reason why I am I not getting updates automatucally. I have the international H791 model. Firmware version MDA89E. Its two OTAs outdated.
Click to expand...
Click to collapse
[TUTORIAL][GUIDE][HOW TO] Flash Factory Images || Unroot
http://forum.xda-developers.com/nexus-5x/general/tutorial-flash-factory-images-unroot-t3231627
How to download and install the Android Marshmallow OTA update on Nexus devices
http://www.digitaltrends.com/mobile/how-to-install-ota-updates-on-google-nexus-devices/
:good:

Can't get firmware updates [SOLVED]

Some time ago I loaded a firmware onto my VZW S8+ (G955U) which I thought was a legitimate firmware. However, I've never been able to update the phone since. The firmware that I loaded was CRE1 and since loading that, no OTA updates have occurred and even trying to use the VZW update tool, I get an error saying no update for that firmware or something to that effect.
I assume that I would need to flash back to a base version 8 firmware and then see how things go from there but I haven't been able to locate a base v8 firmware - assuming that is the direction I need to go.
Can anyone advise? The phone is not rooted. I did see one other similar thread with CRE1 firmware from 2018 - I can try downloading the closest firmware to CRE9 that I can find, which is CRK9, and see if I can get it to load.
Other suggestions/ideas are welcome!
[UPDATE]
So I essentially followed another post here and using Odin 3.13.1 I loaded CRK1, the oldest I could find that was near CRE1, and the phone came back up and pretty much immediately notified of an OTA update. About 12 or so OTA updates later and I'm at the current OTA release.
I'm having the same issue. I bought a VZW S8+ (G955U) from eBay Seller mistyelectronics that was supposed to be new in box. It has never updated since I received it almost a year ago. It stuck on Software Version G955USQS5DSE5. Any insight or advice to go the same route? I used Odin years ago. Where would I look for the files to load to the phone?
I appreciate any help you can give.

Categories

Resources