Hello Boys,
i have a problem connecting my OP3 to the citroen c4 AUX for calls.
Basically the problem is that the other person hear themself as echo during calls.
I checked on google and they say to go to tty settings and change settings for headset.
Do you have this issue?
Do you know how can i solve it?
I think that the problem is the phone mic that remain active during aux (without microphone) connected.
Thank you,
Simon
Related
Hi all,
I am in serious trouble....
I dropped my xda exec and now the speaker and mic had gone....
The phone can still sound for an incoming call but when you play WM.
I can use my wired headset to make and receive calls.
However, for BT headset (which I prefer to use) always has a problem of disconnection after 10 seconds. In the past, when the phone is ok, no such problem to me...I am using the Jabra 250v.
Thanks in advance everyone.
Cheers,
First of all, I would like to says big thank to all rom cooker. You all did a very great roms. However, I still have a little problem that annoy me a lot...
I had connected the stero bluetooth headset with Hermes and choose both "Wireless Stero" and "Headset" profiles in bluetooth setting.
Then when there is incomming call, the Hermes will not ring. So I had a lot of miss calls.
However, if I disable the "Wireless Stero" profile in bluetooth setting, the Hermes will ring normally.
I used to use the Prophet before and there is no problem. The Prophet will ring normally although I choose both profiles.
The stero bluetooth headset is the same, iTech Clip Radio.
I had tried on many roms and found the same problem. So I guess that maybe I have to modify the registry setting to enable ringing on "Wireless Stero" profiles. Can somebody help me to solve the problem please???
I have the same issue and assumed that's how it worked since I just got this Jabra BT8040 that supports wireless stereo. It would only ring through my headset when wireless stero was enabled. If there is a way to get the phone to ring also that would be great. Right now I do the same thing as you, disable the wireless stereo until I need to use it.
My guess is this is by design since all sound is routed to stereo headset then so would the ringer. This isn't an issue for me since the Jabra BT8010 I can turn on/off stereo by simply pressing a button on the headset.
Sorry don't know of a solution.
Thinking about it I guess you could use something like mortscript and make a button that turns stereo pairing on/off to make it simpler I dunno.
I have similar issues with the PAYS rom, when listening to music via my BT earpice (Jabra) where you click the answer button on the earpice it then takes the music from the device and plays it through the jabra ONLY for about 5 seconds and then defaults back to the device?
Any suggestions would be appreciated?
in my tp2 i noticed that when i have a wired or bluethooth headset conected and someone calls me it only rings in the headphones! this made me lose several phone calls.
in other devices i had , i used a reg hack for it to ring in the device speaker and headphone,so i tried in my tp2 but it does not work as the reg hack is related to the microsoft bluethooth stack.
therefore i m asking for help and also if other tp2 users can confirm this issue.
my bt heaset is a jabra bt3030.
thanks
I am having the same problem with my TP2, the headset becomes useless for this reason.
I use a Sennheiser MM-200 headset, bought this headset not to have earphones plugged in ears all time but only when i have incoming call.
Not sure what to tell you about the wired headset, but is your BT using the normal headset BT profile or is it connecting also with A2DP/Stero BT? That could be part of the problem.
In the Bluetooth menu it is connected with: "Stereo Audio" and "Hands-free"
you can switch off the stereo audio function and stay with the hans-free function only. it works fine, but you have to do it manually.
wolfgang
I made a soft reset and now the phone rings even with stereo audio enabled - whats good for me, but i do not understand why
Hi Faria,
There is a setting in the BT config to transfer "ALL" system sounds to the connected audio device, this may be your issue. I don't use a wired but my Rhodium rings in the headset and on the device after removing this option.
Cheers,
Beasty
I really hate this feature too. I am used to listening to music on my BT hedset. So when I get home I would just take them off, put the phone on my desk and go about my business. But if I don't disconnect the headset now I won't notice it ringing... which can lose in lost phone calls.
Hopefully someone will find a workaround.
Start>Settings>Connections>Bluetooth
First tab (gears)>Advanced>Audio
"Play system sounds on remote hands-free device" = uncheck
Just tested and works for me.
I get the normal ringtone from the phone and the regular "beep" from the stereo headset.
FYI, this is basically the same information as listed two posts up...
On my old phone if my headset was in and my phone rang it would say call from and state the persons name through my headset. The ringer itself wouldn't play through my headset nor the phone. And now I can't remember but I know it beeps in my ear but I think the phone plays the actual ringer also at the same time. But if I checkmark what you guys are unchecking will the actual ringer play through my plantronics bt headset and not on the phone.. I kind of would like that for if I am out and dont' want my phone to ring all loud I would rather the ringer play in my ear and was wondering if that's what happens when I check that. Mine was unchecked when I got the phone.. I don't havea bt headset I use for music just talking mostly when driving..
Dear All,
I have a quite big problem, when I want to make a phone call in my car.
I connect the phone's audio out via a minijack to my car's radio and I want to use my phone's built in microphone for phone calls.
Unfortunately the mic does not record my voice loud enough. When I use the phone's built in loudspeaker it works fine, but when I use the car radio as sound output the mic does not record loud enough.
Does anybody know how to solve this issue?
My Samsung Galaxy Note 1 had a car mode available for this.
Thanks!
Simply, the headphone jack also contains the mic connector for a proper phone head/earphone and mic. Plugging your phone into your stereo via this jack disconnects the internal mic in favour of the headset mic which of course you won't have if you connect to the car stereo. So you are effectively disabling the ability to use the phone for calls when plugged in this way.
But the mic is NOT disabled. It is still enabled but is recording the voice as if it is being used like in a normal phone call. All I need is a function to switch the mic to some kind of a handsfree mode.
Sorry for my English.
With "normal phone call" I mean the phone being held right at your ear.
With "handsfree mode" I mean speakerphone mode.
So I need the audio out via stereo jack and I need the voice in via phone microphone in speakerphone mode...
Can you try using a cable that doesn't pass microphone? I think the difference is the full cable WITH mic uses 3 connections and the standard audio only uses 2.
This will prevent the internal microphone from being disabled.
player911 said:
Can you try using a cable that doesn't pass microphone? I think the difference is the full cable WITH mic uses 3 connections and the standard audio only uses 2.
This will prevent the internal microphone from being disabled.
Click to expand...
Click to collapse
I already use a standard audio cable with 2 connections only. The problem is not that the microphone is not working at all but it is not recording loudly enough. I simply want it to record as loudly as it does on speakerphone mode.
Hello XDA,
my earphones are making a weird buzzing sound. i know its a software e fault with the microphone because my stereo works fine. so i want to make a hard reset with my p8000. but how can i do that?
on my earphones in can only hear the music. the voices has a echo effect. also with enigeermode i wasn't able to fix it. anybody suggestions?
jasux said:
Hello XDA,
my earphones are making a weird buzzing sound. i know its a software e fault with the microphone because my stereo works fine. so i want to make a hard reset with my p8000. but how can i do that?
on my earphones in can only hear the music. the voices has a echo effect. also with enigeermode i wasn't able to fix it. anybody suggestions?
Click to expand...
Click to collapse
When you say "my stereo works fine" do you mean the sound is OK when you connect from the headphone socket to a stereo amplifier?
There is a common fault with the P8000 that the connections to the headphone socket are not well soldered, and come off. This can result in the sound becoming echo-y or quiet or not at all. It happened to me and I had to take the phone apart and resolder the connections.
There is a thread here http://forum.xda-developers.com/elephone-p8000/help/headphone-jack-issue-t3214547