Develop Bugs

Xposed for ART/Lollipop Alpha Released

Go get it!
http://forum.xda-developers.com/showthread.php?t=3030118

Yup woke up to a story of phandroid and was coming to post it but you beat me to it. ?

Is it working fine for you guys?

IXChicharitoXI said:
Is it working fine for you guys?
Click to expand...
Click to collapse
Nope. Running CM12. Tried Supersu instead of the built in su, no luck. Tried changing SELinux to permissive, no luck.
No way am I going to post in that xposed thread. It's nuts over there.

DeezNotes said:
Nope. Running CM12. Tried Supersu instead of the built in su, no luck. Tried changing SELinux to permissive, no luck.
No way am I going to post in that xposed thread. It's nuts over there.
Click to expand...
Click to collapse
Hahaha yeah I saw. Anyone with a complaint gets bombarded. I hope it gets sorted. It's the only thing holding me back from lollipop(I need my instagram downloader)

This is a helpful work-around post: http://forum.xda-developers.com/showpost.php?p=58862247&postcount=1344
^^ UPDATE: It works. ^^
If I have time I'll try the init.d fix posted here: http://forum.xda-developers.com/showpost.php?p=58859387&postcount=1317

Working for me on latest illusion ROM. Only install modules that are known to work. Ones that don't have caused boot loops for me. There's a spread sheet with a list of modules that work and don't work. Just google xposed lollipop modules it came right up for me. Good Times are here.
Sent from my LG-D851 using Tapatalk 2

Has anyone had any success with flashing Xposed on ART? I cant flash the zip file. I keep getting an error --
E:Error executing updater binary in zip
Because "Wrong SDK version
Im using the latest TWRP

grkmaster said:
Has anyone had any success with flashing Xposed on ART? I cant flash the zip file. I keep getting an error --
E:Error executing updater binary in zip
Because "Wrong SDK version
Im using the latest TWRP
Click to expand...
Click to collapse
Works for me on CM12 D851

Mine is working with the latest Validus. Root Cloak, YouTube AdAway and Pandora Patcher all functioning properly.

Module for Xposed? what do you have?

What do you guy use on your m9? some apps works, but say for like gravity box, most of the options doesn't work. The recent screen options doesn't work at all since we have sense... the only tweaks I have on mine so far is the background youtube playback :l

Since yesterday i use xtended settings.

I use greenify. Power nap and YouTube adaway no problems

Snapprefs! A very handy tool for Snapchat. Works flawlessly.
Sent from my HTC One M9 using XDA Free mobile app

I can't seem to get xposed to even install on my stock rooted t-mobile m9 I flashed the one build for arm64 sdk21 but it keeps refusing to boot past the HTC one screen. Any ideas?

YouTube adaway, fix memory leak , and ogyoutube fix to sign into modded YouTube. I've tried to get xprivacy to work but it hasn't for me yet., that is the one thing I'd like to see fixed for our software.
---------- Post added at 12:57 AM ---------- Previous post was at 12:54 AM ----------
jmwils3 said:
I can't seem to get xposed to even install on my stock rooted t-mobile m9 I flashed the one build for arm64 sdk21 but it keeps refusing to boot past the HTC one screen. Any ideas?
Click to expand...
Click to collapse
Check the download see if it is good , what ROM are you using and are you s off?

BUBBA DUB'S said:
YouTube adaway, fix memory leak , and ogyoutube fix to sign into modded YouTube. I've tried to get xprivacy to work but it hasn't for me yet., that is the one thing I'd like to see fixed for our software.
---------- Post added at 12:57 AM ---------- Previous post was at 12:54 AM ----------
Check the download see if it is good , what ROM are you using and are you s off?
Click to expand...
Click to collapse
Stock rooted rom, and yes I'm s-off

jmwils3 said:
Stock rooted rom, and yes I'm s-off
Click to expand...
Click to collapse
I'm driving right now and I can't remember where I got it, but there is something called, Remove_hrdump.zip you have to flash if on stock rooted rom because the s off process created a hrdump file that causes issues I believe with xposed.

BUBBA DUB'S said:
I'm driving right now and I can't remember where I got it, but there is something called, Remove_hrdump.zip you have to flash if on stock rooted rom because the s off process created a hrdump file that causes issues I believe with xposed.
Click to expand...
Click to collapse
Found the file and followed the flashing instructions, still sticks at boot when attempt flashing xposed files. Using twrp 2.8.6.4 if it matters, tried with manual mount of /system and without it, same result.

jmwils3 said:
I can't seem to get xposed to even install on my stock rooted t-mobile m9 I flashed the one build for arm64 sdk21 but it keeps refusing to boot past the HTC one screen. Any ideas?
Click to expand...
Click to collapse
How long did you wait after installing xposed? The initial boot after flashing xposed can take a VERY long time (like 10+ minutes).

Tenchi4U said:
How long did you wait after installing xposed? The initial boot after flashing xposed can take a VERY long time (like 10+ minutes).
Click to expand...
Click to collapse
I waited over 10 minutes each time I've attempted it. Gonna try a fresh download from my PC and see if that helps.
Edit: nope, no change. Guess I'm not meant to have both s-off and xposed.

jmwils3 said:
I waited over 10 minutes each time I've attempted it. Gonna try a fresh download from my PC and see if that helps.
Edit: nope, no change. Guess I'm not meant to have both s-off and xposed.
Click to expand...
Click to collapse
you must be on a stock odexed rom if its not working, because following the directions here has worked for every rom except odexed roms.

steal25 said:
you must be on a stock odexed rom if its not working, because following the directions here has worked for every rom except odexed roms.
Click to expand...
Click to collapse
Oh OK. Yeah, I'm on a stock odexed rom, as there are not, to my knowledge, any deodexed roms for the T-Mobile m9, and I can't go without Wi-Fi calling.

I can not flash the file recovery from arm.
Failed error binary.

This is my list :

jmwils3 said:
Oh OK. Yeah, I'm on a stock odexed rom, as there are not, to my knowledge, any deodexed roms for the T-Mobile m9, and I can't go without Wi-Fi calling.
Click to expand...
Click to collapse
i'm stock tmo rom working fine for me. Oh and mine did take a LONG time to install.. just have to be patient.

[Cruzer] said:
i'm stock tmo rom working fine for me.
Click to expand...
Click to collapse
Are you s-off or s-on? Because it's apparently an issue with s off odexed roms. If you are s-off, then how did you get it to work?

jmwils3 said:
Are you s-off or s-on? Because it's apparently an issue with s off odexed roms. If you are s-off, then how did you get it to work?
Click to expand...
Click to collapse
i'm s-on, didn't know there was issues with s-off folks..
also since your s-off.. why don't you just got back to s-on and play with xposed. assuming you used sunshine.. you can go back to s-off again.

I'm doing a backup now, will attempt that.
Apparently sunshine doesn't have the option to do the process in reverse, and I cant seem to find info on the process for s-on on an m9. Yay :/

jmwils3 said:
I'm doing a backup now, will attempt that.
Apparently sunshine doesn't have the option to do the process in reverse, and I cant seem to find info on the process for s-on on an m9. Yay :/
Click to expand...
Click to collapse
Try uninstalling xposed installer first to see if the zip can boot up without the modules. Sometimes if the module is not compatible then you'll get the infinite booting screen. Learned that the hard way. Spent hours.... Lol
Sent from my HTC One M9 using XDA Free mobile app

xposed runtime for Marshmallow update?

Is there an xposed runtime .zip or whatever for the marshmallow update to Sprint s6 to be able to use xposed modules?
I still have:
xposed-v80.0-sdk22-arm64-custom-build-by-wanam-20160211.zip
Which worked on LP, but I don't want to flash it and mess up the phone if it's not supposed to be for this version.

H0wdy said:
Is there an xposed runtime .zip or whatever for the marshmallow update to Sprint s6 to be able to use xposed modules?
I still have:
xposed-v80.0-sdk22-arm64-custom-build-by-wanam-20160211.zip
Which worked on LP, but I don't want to flash it and mess up the phone if it's not supposed to be for this version.
Click to expand...
Click to collapse
There's a marshmallow version of xposed in the original thread, however, we don't have twrp yet. There's no way to flash a zip without that, at least that I know of. I'm sure we won't be waiting too long for twrp though.

Should same mm version work?

H0wdy said:
Should same mm version work?
Click to expand...
Click to collapse
same version of what? TWRP won't work from my understanding. There is a version of xposed for MM though

Flashfire works to flash xposed with. You will want the sdk23 version that is made for MM though.

carrsteven said:
Flashfire works to flash xposed with. You will want the sdk23 version that is made for MM though.
Click to expand...
Click to collapse
Thats good stuff. I read on the xposed forums that it will not work on samdung stock rom. Can you confirm what package you got to work with this device? Is this the package that you flashed?
http://forum.xda-developers.com/attachment.php?attachmentid=3631566&d=1454436795
Sent from my SM-G920P using Tapatalk

asafegous said:
Thats good stuff. I read on the xposed forums that it will not work on samdung stock rom. Can you confirm what package you got to work with this device? Is this the package that you flashed?
http://forum.xda-developers.com/attachment.php?attachmentid=3631566&d=1454436795
Sent from my SM-G920P using Tapatalk
Click to expand...
Click to collapse
No, that is from the official xposed thread, not the one for Samsung phones. This thread here: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
xposed-v80.0-sdk23-arm64-custom-build-by-wanam-20160211.zip is the file you want to download.

southernstyle said:
There's a marshmallow version of xposed in the original thread, however, we don't have twrp yet. There's no way to flash a zip without that, at least that I know of. I'm sure we won't be waiting too long for twrp though.
Click to expand...
Click to collapse
Actually we do... We just got it working and are planning to share it later

1619415 said:
Actually we do... We just got it working and are planning to share it later
Click to expand...
Click to collapse
Thats awesome.

1619415 said:
Actually we do... We just got it working and are planning to share it later
Click to expand...
Click to collapse
Awesome can't wait. Battery life has been terrible lol. Thanks for the update

southernstyle said:
Awesome can't wait. Battery life has been terrible lol. Thanks for the update
Click to expand...
Click to collapse
Battery has been terrible on MM? Ughh my S7 upgrade can't come soon enough -_-

So i got boot ani to quit reminding me how big sprints......spectrum is. Any way to change carrier label?
Sent from my SM-G920P using Tapatalk

JoeFCaputo113 said:
Battery has been terrible on MM? Ughh my S7 upgrade can't come soon enough -_-
Click to expand...
Click to collapse
I've gotten a full day of heavy use with a custom ROM, I didn't make it to 5pm today. I had greenify and amplify working on the custom rom though, so hopefully now that we have recovery, I can test out xposed and get some of those things back. This was my first Samsung phone, I'm not sure I'd go to the S7 after this experience. I came from a phone that easily got 1.5 days on a charge.

carrsteven said:
Flashfire works to flash xposed with. You will want the sdk23 version that is made for MM though.
Click to expand...
Click to collapse
I can't get this working correctly.
I installed flashfire and flash the zip and let it keep the option to mount system read/write, and i see it unpacking files, and then the screen goes blank and eventually i have to force it to reboot.
After reboot, xposed apk says it's not installed.
Is there some other way to flash the zip?

1619415 said:
Actually we do... We just got it working and are planning to share it later
Click to expand...
Click to collapse
You used flashfire? That won't do it for me. After extracting, goes to a black screen and I have to force a reboot, then xposed afterwards says it's not installed.

Worked just fine for me. For multiple different files. V4a, xposed, and a couple other things.
Screenshots added for exact settings I used.
Flashfire takes a few minutes to load once it does all that unpacking. My suggestion would be to be patient before forcing a reboot.
Sent from my SM-G925P

More screens.

carrsteven said:
Worked just fine for me. For multiple different files. V4a, xposed, and a couple other things.
Screenshots added for exact settings I used.
Flashfire takes a few minutes to load once it does all that unpacking. My suggestion would be to be patient before forcing a reboot.
Sent from my SM-G925P
Click to expand...
Click to collapse
Thanks. I notice you have SM-G925P?
Does it matter that I have G-920P?
After it does the "loading..." showing the unloading and all the files extracting, the screen goes black, and it's unresponsive. Even after 10 minutes.
I used all your settings... same thing.

H0wdy said:
Thanks. I notice you have SM-G925P?
Does it matter that I have G-920P?
After it does the "loading..." showing the unloading and all the files extracting, the screen goes black, and it's unresponsive. Even after 10 minutes.
I used all your settings... same thing.
Click to expand...
Click to collapse
That's odd, I wouldn't figure there'd be that much of a difference between the flat and edge model that flashfire would work for me and not for you.

carrsteven said:
That's odd, I wouldn't figure there'd be that much of a difference between the flat and edge model that flashfire would work for me and not for you.
Click to expand...
Click to collapse
Well, it's been 15 minutes now. Still black screen. I'm going to have to reboot it.
Is there some other way to install the .zip?

Question about Xposed Framework.

I just rooted my HTC 10 and installed Xposed and got the Youtube Adaway Module. My previous phone was a Z3 where I had used GravityBox which ran fine. Since this is my first HTC device will the GravityBox MM work for this device or is there an alternative besides GravityBox.
Thanks Again.

As I remember GravityBox is programmed to run on and with AOSP based ROMs. Now when it comes to HTC, stock ROMs aren't AOSP based. I never used it myself though and I'm a long time HTC user. If you want you can try it if course, but should perform a backup prior to doing so.
Sent from my HTC 10 using XDA Labs

HTCNerdYoda said:
As I remember GravityBox is programmed to run on and with AOSP based ROMs. Now when it comes to HTC, stock ROMs aren't AOSP based. I never used it myself though and I'm a long time HTC user. If you want you can try it if course, but should perform a backup prior to doing so.
Sent from my HTC 10 using XDA Labs
Click to expand...
Click to collapse
Just tried and it works, only needed GravityBox to show the AM/PM and change the battery icons. Can't say about the other features on it as I only needed these two functions. Also got Xposed working with greenify, and Youtube Adblock. Looks like I am good to go for a while!

Sounds as if. Have fun with your new 10!
Sent from my HTC 10 using XDA Labs

Most GB features work. Lock screen features don't due to a non AOSP lock screen.
Adaway works.
Wish we'd get Sense Toolbox. Missing my secure lock screen.
Sent from my HTC 10 using Tapatalk

serophia said:
I just rooted my HTC 10 and installed Xposed and got the Youtube Adaway Module. My previous phone was a Z3 where I had used GravityBox which ran fine. Since this is my first HTC device will the GravityBox MM work for this device or is there an alternative besides GravityBox.
Thanks Again.
Click to expand...
Click to collapse
Which exact framework did you use? Thanks

Swarai said:
Which exact framework did you use? Thanks
Click to expand...
Click to collapse
Use the most recent version 84, sdk23 for arm64
Sent from my HTC 10 using Tapatalk

datafoo said:
Use the most recent version 84, sdk23 for arm64
Sent from my HTC 10 using Tapatalk
Click to expand...
Click to collapse
S-off?

Swarai said:
S-off?
Click to expand...
Click to collapse
We're talking about xposed and not s-off.
They're not related.

datafoo said:
We're talking about xposed and not s-off.
They're not related.
Click to expand...
Click to collapse
Okay thanks... I just flashed v84 sdk23 arm64 and it gave me "Updater process ended with ERROR: 1 what did you do to get your xposed working? thank you

first off, I mean this the best way possible. You need to be both more clear and more complete in your posts and questions. I could (and many would) very much give you a hard time but will try to help you.
1. If I'm not mistaken, that is a TWRP error. You can do a forum or google search and you'll find many threads about it with options.
2. Post the TWRP log so we can see what happend, or take a screenshot so we can see exactly what the output text on the screen was before the error.
3. Are you using TWRP? I assume so if you're on an HTC 10.
4. I simply flashed the proper exposed module in TWRP.
Long story short way too many variables to simply answer your question. You could wipe the cache and reboot into recovery, re copy the .zip to your SD or adb push it over. and reflash

datafoo said:
first off, I mean this the best way possible. You need to be both more clear and more complete in your posts and questions. I could (and many would) very much give you a hard time but will try to help you.
1. If I'm not mistaken, that is a TWRP error. You can do a forum or google search and you'll find many threads about it with options.
2. Post the TWRP log so we can see what happend, or take a screenshot so we can see exactly what the output text on the screen was before the error.
3. Are you using TWRP? I assume so if you're on an HTC 10.
4. I simply flashed the proper exposed module in TWRP.
Long story short way too many variables to simply answer your question. You could wipe the cache and reboot into recovery, re copy the .zip to your SD or adb push it over. and reflash
Click to expand...
Click to collapse
Yes, I am using TWRP3.0.2.2. When I flash xposed v84 sdk23 arm64 I get what you seen in the photo. When I open xposed installer (V 3.0 alpha4) I get "The latest version of xposed is currently not active". Though I'm still searching I still cannot find what my particular problem is. I hope these attachemnts can help. Thank you

Swarai said:
Yes, I am using TWRP3.0.2.2. When I flash xposed v84 sdk23 arm64 I get what you seen in the photo. When I open xposed installer (V 3.0 alpha4) I get "The latest version of xposed is currently not active". Though I'm still searching I still cannot find what my particular problem is. I hope these attachemnts can help. Thank you
Click to expand...
Click to collapse
If you look at the screenshot it tells you exactly what the problem is. Did you even read it?
Tell us what it says directly before the error?
"system mounted as read only file system" - you didn't mount as read/write. You have to mount R/W for SU and anything like this you're going to flash.
Try again, this time set the system to mount as R/W and be sure to read and watch what you're doing.
People are here to help but the trade-off is you must make efforts and not solely rely on others to solve your problems.
Sent from my HTC 10 using Tapatalk

datafoo said:
Most GB features work.
Click to expand...
Click to collapse
@datafoo Do you happen to know if the long press volume buttons to change tracks mod works from GB on the stock rom? TIA!
Sent from my HTC 10 using XDA-Developers mobile app

VolcanicSkunk said:
@datafoo Do you happen to know if the long press volume buttons to change tracks mod works from GB on the stock rom? TIA!
Sent from my HTC 10 using XDA-Developers mobile app
Click to expand...
Click to collapse
Just tested and it did not work for me.

datafoo said:
Just tested and it did not work for me.
Click to expand...
Click to collapse
Thanks so much!
Sent from my HTC 10 using XDA-Developers mobile app

im trying to get my Xxposed installed as well, and when trying to flash the v84 sdk23 arm64, It throws no errors, and immediately reboots TWRP? Any tips or anyone else seen the same? Thanks

datafoo said:
Just tested and it did not work for me.
Click to expand...
Click to collapse
VolcanicSkunk said:
Thanks so much!
Click to expand...
Click to collapse
Xposed additions worked though! It's a great module

Hello, Is anyone doing anything special to get Xposed to work? It says it's installed and active but no modules work.. Im stock rooted if that helps
Sent from my 2PS64 using XDA-Developers mobile app

l1ttl3z said:
Hello, Is anyone doing anything special to get Xposed to work? It says it's installed and active but no modules work.. Im stock rooted if that helps
Sent from my 2PS64 using XDA-Developers mobile app
Click to expand...
Click to collapse
Did you mount system in TWRP before flashing the SDK? That's what I didnt do, then after I did, all was well
Sent from my HTC6545LVW using Tapatalk

Volume Boot help?

Hello everyone i got the pixel xl 2 i have it rooted and i have a custom rom on it my question ia on my older phone. I was able to modify media_mixer file to boost up the volume now after i rooted my phone i cant seem to find the file for it. Would anyone know where to find the Media_Mixer file or is there a app that can let me boost the volume and thanks in advance.

gokou46 said:
Hello everyone i got the pixel xl 2 i have it rooted and i have a custom rom on it my question ia on my older phone. I was able to modify media_mixer file to boost up the volume now after i rooted my phone i cant seem to find the file for it. Would anyone know where to find the Media_Mixer file or is there a app that can let me boost the volume and thanks in advance.
Click to expand...
Click to collapse
You can use Viper4Android to that. It's a magisk module. You can learn about it here :good:
https://forum.xda-developers.com/apps/magisk/module-viper4android-fx-2-5-0-5-t3577058

Thanks i have viper on my phone it came with the rom but i see no option to increase the sound or is there a setting i have to click on and thanks for the help.

gokou46 said:
Thanks i have viper on my phone it came with the rom but i see no option to increase the sound or is there a setting i have to click on and thanks for the help.
Click to expand...
Click to collapse
Is it working? Do you hear an increase in volume when your playing music or watching YouTube?
It should look like this if it's working properly.

just checked that and no mine is different it say status abnormal neone enabled:no
Enabled: no
Audio format: unsupportted
Processing:no
Sampling rate:0
Did i do something wrong

gokou46 said:
just checked that and no mine is different it say status abnormal neone enabled:no
Enabled: no
Audio format: unsupportted
Processing:no
Sampling rate:0
Did i do something wrong
Click to expand...
Click to collapse
These are the magisk modules your looking for in the magisk manager app. Disregard the Dolby app. I'm assuming your rooted correct?

yes rooted corrected does it matter if the rom i have already had viper installed or should i unistall it and reinstall viper from manager.

gokou46 said:
yes rooted corrected does it matter if the rom i have already had viper installed or should i unistall it and reinstall viper from manager.
Click to expand...
Click to collapse
I'd uninstall it, then get the new stuff. Does the old one show up in magisk manager?

The mixer path file is located in system/vendor/etc/mixer_paths_tavil_taimen.xml
Edit, not sure if that's the exact file you were asking for. Hopefully it helps you get what your looking to do if you can't get viper to do it.

So it seems that i can not delete viper from my apps could i just download it the magisk manager and reinstall it since i can uninstall my viper and the viper i have is the same that you are using oh i also uninstalled the drivers from viper.

Badger50 said:
These are the magisk modules your looking for in the magisk manager app. Disregard the Dolby app. I'm assuming your rooted correct?
Click to expand...
Click to collapse
Hey, Badger! Where'd you get that Dolby MM? Did it shown up for ya after you flashed the Dolby-Oreo.zip or is it different? I ask cause I used that zip and it installed to system for me so of I could go systemless, it'd be awesome.

felosisman said:
Hey, Badger! Where'd you get that Dolby MM? Did it shown up for ya after you flashed the Dolby-Oreo.zip or is it different? I ask cause I used that zip and it installed to system for me so of I could go systemless, it'd be awesome.
Click to expand...
Click to collapse
It's just the dolby-oreo.zip that's been around a while. Just flashed it in twrp and it works fine. However, it's not systemless.
---------- Post added at 11:25 PM ---------- Previous post was at 11:23 PM ----------
gokou46 said:
So it seems that i can not delete viper from my apps could i just download it the magisk manager and reinstall it since i can uninstall my viper and the viper i have is the same that you are using oh i also uninstalled the drivers from viper.
Click to expand...
Click to collapse
If it shows up in the magisk manager modules section, just uninstall it from there. Reboot, then install it again.

Badger50 said:
It's just the dolby-oreo.zip that's been around a while. Just flashed it in twrp and it works fine. However, it's not systemless.
Click to expand...
Click to collapse
That's what I figured, thanks for clarification! :good:

felosisman said:
Hey, Badger! Where'd you get that Dolby MM? Did it shown up for ya after you flashed the Dolby-Oreo.zip or is it different? I ask cause I used that zip and it installed to system for me so of I could go systemless, it'd be awesome.
Click to expand...
Click to collapse
By chance...have you tried moving the apk from system-priv app to data apps with a root browser? Maybe that'll work?

Badger50 said:
By chance...have you tried moving the apk from system-priv app to data apps with a root browser? Maybe that'll work?
Click to expand...
Click to collapse
The thought crossed my mind, but never tried since it's not hurting anything. I always update with a full system image without wipe anyway. I was just curious mostly.
Did you leave yours in system or did you move it to data?

felosisman said:
The thought crossed my mind, but never tried since it's not hurting anything. I always update with a full system image without wipe anyway. I was just curious mostly.
Did you leave yours in system or did you move it to data?
Click to expand...
Click to collapse
I've just left it alone. But now, I'm thinking I might try it just for S & G's! ??

Badger50 said:
I've just left it alone. But now, I'm thinking I might try it just for S & G's! ??
Click to expand...
Click to collapse
Lol, I was thinking the same thing. If you do, let me know your results. :good:

felosisman said:
Lol, I was thinking the same thing. If you do, let me know your results. :good:
Click to expand...
Click to collapse
Will do bro :good:

Hey just got back from work well the viper i had was a built in on with the rom i installed so i cant uninstall it from the manager.

gokou46 said:
Hey just got back from work well the viper i had was a built in on with the rom i installed so i cant uninstall it from the manager.
Click to expand...
Click to collapse
Is it the same version I showed you in the screen shot?? What happens when you go to the download section in magisk manager, does it show an upgrade for that module??