Related
Hi all
my elfin fell from quite a high place, and the four casings into which the small screws visible when you take off the back cover are broken...meaning the front casing is loose too.
do you know where I can find a front cover (I don't really need the back but I'm okay with buying both)... but before that I was thinking maybe someone could have bricked their elf or had an unusable device but with a front cover that's ok...
thanks in advance for your help !
Plenty of covers in a selection of colors on eBay, I suggest you try to find one there. Not that expensive and you can buy a digitizer to match the color.
hi
thnx for your answer . what's a digitizer?
ptitrusse said:
hi
thnx for your answer . what's a digitizer?
Click to expand...
Click to collapse
Digitizer is the outer screen cover attached to the faceplate that is responsible for touch function, the one you use your finger or stylus on. It's sold separately and is fairly easy to replace in cases when the touch function is lost or the digitizer is broken. You can get one to match the color of the housing for a complete look. Just look on eBay and you'll see what I mean.
oh... does that mean that the part responsible for touch function is actually stuck to the front casing and not to the screen itself? I hadn't thought about that... meaning I cannot jut change the front cover, I would have to replace this as well...
[edit] is it possible to use the one from my phone? cause it's working fine after all... I'm looking at it and I don't really know how to take it off...
ptitrusse said:
oh... does that mean that the part responsible for touch function is actually stuck to the front casing and not to the screen itself? I hadn't thought about that... meaning I cannot jut change the front cover, I would have to replace this as well...
[edit] is it possible to use the one from my phone? cause it's working fine after all... I'm looking at it and I don't really know how to take it off...
Click to expand...
Click to collapse
The digitizer is attached to the housing and in your case needs to be pried off before being used again and re-attached to the new housing. The digitizers are fairly cheap (the reason I don't bother with screen protector), so you will get unscratched and new one that you will have to attach to the new housing. My recommendation would be to buy a new housing and a matching digitizer.
Hi
thnx again for your help. I have one more question. Is the digitizer stuck to the screen or is it the actual hard plastic screen?
I find it's actually fairly expensive. When you add up the housing + the digitizer + the shipping costs it adds up to quite a lot..
[edit] Ok I think I finally got it now.
what do you think of this product ?
HERE
I have searched high and low for an answer on how to replace a scratched screen of the SGS2 by yourself and have finally found the answer.
This will definitely VOID YOUR WARRANTY so don't say you haven't been warned.
I suggest you only use this guide if you were desperate like me. My phone didn't come with an official warranty so I was as good as screwed if I wanted a new screen.
Step 1: Obtain the part
Just ebay for lcd screen and digitizer galaxy s2 (however u may wish to buy it with the faceplate see below note). You want both the super amoled plus screen and the digitizer together. You can get this for about 120-130 USD.
There are some vendors that sell just the 'lens' but you need a specialized machine to replace it and is simply not worth the trouble.
Note that if you go to an original Samsung service centre, when they order the part, it comes together with the face plate and is therefore a breeze to install. This part is for sale on Ebay too. http://cgi.ebay.com/LCD-Touch-Digit...312?pt=LH_DefaultDomain_0&hash=item3a682b9ad0. I would recommend you to buy this type instead of just the LCD and digitizer.
Follow this disassembly guide (not mine).
Now using a thin metal flat tool with a wide flat surface area, dig at the small gap from the top of the screen and pry the screen from the frontplate. It is held entirely by double-tape so don't worry about any screws, catches. Be careful of not damaging the bezel in the process.
Clean off the old black tape and double tape as best as u can, and be careful of the bottom buttons. The attachment shows how it looks like after cleaning it.
Reapply the double tape in strips and try to shape it to fit as much as you can. This is tiresome but necessary since the adhesive behind the lcd screen is very weak and you don't your screen falling out of you halfway.
Push it in and it should stick. That's it! Then reassemble.
Confirmed working!
thanks for the write up, do you have any more photos of your process?
OMG, it's like watching an autopsy.
Could a better resolution screen or even 3d screen be used/upgraded later on?
Nice to know for something happens, Hope not
Hope wont be necessary. How did you scratch the screen so hard that it had to be changed? I tought the Gorilla Glass is almost unscratchable.
Man,,u shud handle it a bit gently ,,,,i mean,i flinched every time u "threw" the phone on the table.
On second thought, I might as well buy that screen protector
Sent from my GT-I9100 using XDA Premium App
wow that is the definition of T H I N !!!!!
Samsung Galaxy S II 2 i9100 LCD Touch Digitizer Screen
Thanks also full part with bezel here http://www.ebay.co.uk/itm/Samsung-G...062?pt=LH_DefaultDomain_3&hash=item3cb9ff0e4e
Samsung Galaxy S II 2 i9100 LCD Touch Digitizer Screen
With Housing Bezel front cover ,Home Button, Flex Cable
http://www.ebay.co.uk/itm/LCD-Touch...669?pt=LH_DefaultDomain_3&hash=item3cb9ff0cc5
Samsung Galaxy S II 2 i9100 LCD Touch Digitizer Screen
With Housing Bezel front cover ,Home Button, Flex Cable Without Samsung logo
White house soon on site
psp888 said:
thanks for the write up, do you have any more photos of your process?
Click to expand...
Click to collapse
Unfortunately not at this time. I will do it the next time around (which will be soon as there is a slight imperfection with my button sensitivity so I might be inclined to try it again) but trust me it's not a beautiful process. Needs lots of guts. Nothing technical about it. Shove the flat tool in the gap and keep on loosening the glue as much as u can then take it off.
podgo said:
Hope wont be necessary. How did you scratch the screen so hard that it had to be changed? I tought the Gorilla Glass is almost unscratchable.
Click to expand...
Click to collapse
It's more like cracked. I dropped it on some rocks from waist height and it cracked. It seems that gorilla glass is not shatter proof. There are also some scratches/mini cracks from where the rocks cut it.
Lesson learnt, get a screen protector that hopefully will reinforce it a bit more.
I wonder how these replacement parts compare to the quality of the original parts.
Is your new screen a Super AMOLED+ screen? all ebay listing just says LCD. Is it original Samsung part?
psp888 said:
Is your new screen a Super AMOLED+ screen? all ebay listing just says LCD. Is it original Samsung part?
Click to expand...
Click to collapse
There some listed as Super AMOLED+ screen just search on ebay or even drop the sellers a question about their iteams.
It is a Super Amoled + screen (don't see any difference in quality between the old and new one). Most sellers don't really know much of their products unfortunately but they do say it's original and I do believe mine is.
There's no Samsung print on the front plate but it does have a part number which corresponds closely to the original one. Everything else looks exactly the same, even the black sponge at the back and the microchips have Samsung wording on them.
BarryH_GEG said:
OMG, it's like watching an autopsy.
Click to expand...
Click to collapse
I have stomach to watch dead bodies, but not a GSII LOL
Dropped SGS2 from bikemount : broken screen.
OK,
I broke my screen this weekend. I was on a bike tour with the SGS2 mounted on the steering bar. For some unclear reason, the universal holder came off the bikemount at 25 kmh... Dropped on the paved road, and although still in the universal holder, which is made of soft rubber (which I would expect to break the fall), the screen of my beloved SGS2 was cracked !!! Apart from the cracked screen, everything else seems to work as before.
So, today I ordered a replacement set with bezel from aliexpress.com at 148USD.
When I get the part, I will try to post some pictures of the replacement process.
I had an HD2 before ... just sold it last Friday :-( ... I think over a period of 1,5 year, I dropped the HD2 about 6 times on hard surfaces ... also it fell off my bike once ... the HD2 never broke.
So, is it just bad luck this time, or is the built quality of the SGS2 just not as good as the HD2 ?
Regards,
DirkB
DirkB19 said:
OK,
I broke my screen this weekend. I was on a bike tour with the SGS2 mounted on the steering bar. For some unclear reason, the universal holder came off the bikemount at 25 kmh... Dropped on the paved road, and although still in the universal holder, which is made of soft rubber (which I would expect to break the fall), the screen of my beloved SGS2 was cracked !!! Apart from the cracked screen, everything else seems to work as before.
So, today I ordered a replacement set with bezel from aliexpress.com at 148USD.
When I get the part, I will try to post some pictures of the replacement process.
I had an HD2 before ... just sold it last Friday :-( ... I think over a period of 1,5 year, I dropped the HD2 about 6 times on hard surfaces ... also it fell off my bike once ... the HD2 never broke.
So, is it just bad luck this time, or is the built quality of the SGS2 just not as good as the HD2 ?
Regards,
DirkB
Click to expand...
Click to collapse
It is very easy to do. Just unclip each component and transplant it to the new case.
I have to do my friends one this weekend as he has dropped it and damaged the screen and the bezel .
I have managed to source the screen and the bezel for him all as one piece .
Now all the guides i have seen just rip the phone to pieces , surely if we have the right bits like i have bought this fix is very smple to do??
I am thinking it is just a case of undoing the 7 screws at the back of the phone , opening it up and then disconnect the screen cables from the mainboard . Does the whole front then come away??
If not i take it i have to undo the screws on the main board to release the screen? but this means the componets of the main board may come loose etc??
Has anyone that has done this got any info on just swapping the screen with the complete part? when i say complete part i mean the one that comes with the bezel and home button etc like this
http://cgi.ebay.com/LCD-Touch-Digit...312?pt=LH_DefaultDomain_0&hash=item3a682b9ad0
Thanks in adance for any guidance
buxz777 said:
Has anyone that has done this got any info on just swapping the screen with the complete part? when i say complete part i mean the one that comes with the bezel and home button etc like this
http://cgi.ebay.com/LCD-Touch-Digit...312?pt=LH_DefaultDomain_0&hash=item3a682b9ad0
Thanks in adance for any guidance
Click to expand...
Click to collapse
+1 for me.
I received my screen including bezel.
I've removed the main board just like the guy in the Youtube video.
But now I still have to transfer (from original front to my new front):
- the bottom PCB (where the microUSB sits)
- the camera
- the speaker
etc ...
I can not find a description/movie of how to do this ?
The bottom PCB for example has 2 screws, but after removing them the PCB itself looks like glued to the front assy'.
I prefer to see or get proper instructions before starting the rest of this adventure
...
PS : I got my part from aliexpress.com within 2 weeks (via airmail). It's with the Samsung logo on it and the package included all required tools (screwdrivers) to do the job. Would be nice to see some written instructions included as well.
Grtz,
DirkB
I'm trying to find a source on whether I can replace the trim know my phone since it's been dinged from the previous owner as well as myself.
I've found some the link to the replacement screen thread but it doesn't say if the lcd is part of the top or how to get it out? I've seen some oem housings online but not sure if I can remove my lcd which is fine and put it in the newer housing?
Is there glue or adhesive that holds it in?
Thanks for any help.
Sent from my GT-I9100 using xda app-developers app
You just need to unscrew the backplate and exchange it.
No glue no adhesives or something. it just sits there.
It will take about 10 minutes or so..
Here is a picture of the part:
Mine fell out of its place, the last i had the phone opened and i´m to lazy to put it back.
Edit: sorry for that huuuuge picture.. blame our 8mp camera.
supermult said:
You just need to unscrew the backplate and exchange it.
No glue no adhesives or something. it just sits there.
It will take about 10 minutes or so..
Here is a picture of the part:
Mine fell out of its place, the last i had the phone opened and i´m to lazy to put it back.
Edit: sorry for that huuuuge picture.. blame our 8mp camera.
Click to expand...
Click to collapse
Sorry - but I think we have a misunderstanding. I'm talking about the chrome trim around the entire LCD not the camera.
oh.. honestly i don´t think that the part you described is chrome. Atleast not on my GSII
and the thing i posted is the shiny ring around the headphone plug.
OP its not chrome its plastic..
1) replace the whole screen housing with with working parts from say ebay
2) buy a whole SGS2 housing unit and plus top screen ( this option you'll need to remove youe current lcd screen and once replaced in new housing the top screen needs to be bonded to housing. (M3 double sided tape or a thin silcon glue)
3) take it to a service centre
4)keep it as it is..
as par your question
Is there glue or adhesive that holds it in? Yes.
Top screen will need to be heated with hot air to release it from its bond.
Nyssa1104 said:
OP its not chrome its plastic..
1) replace the whole screen housing with with working parts from say ebay
2) buy a whole SGS2 housing unit and plus top screen ( this option you'll need to remove youe current lcd screen and once replaced in new housing the top screen needs to be bonded to housing. (M3 double sided tape or a thin silcon glue)
3) take it to a service centre
4)keep it as it is..
as par your question
Is there glue or adhesive that holds it in? Yes.
Top screen will need to be heated with hot air to release it from its bond.
Click to expand...
Click to collapse
Thanks - that's what I wanted to hear. So it's more effort than I'd like to spend on it. Looks like I'll just move the phone to try something else.
Hi guys,
I have just broken my Dinc2's glass screen. The underlying LCD screen is still functional and the touch screen works. So, I am guessing that I only broke the glass on the top of the screen... I uploaded pics to make it clear.
The casing near the USB port got bent some time back when I went kayaking... And I think that is where the screen cracked significantly when I dropped the phone.
I can still use the touchscreen and there are no discoloration on the LCD. So, can you guys suggest to me what Screen replacement product I need to buy online and (preferably) give me a link for said product and a How to repair guide. Plus, is this process easy? As in if I spend a few hours carefully following the steps to repair, will I succeed?? Moreover, can I replace the metal casing as well?
Thanks for the help gang! I really need to get my phone back to 100% working condition as I don't have an upgrade available till April '13 and I have cancelled my phone's insurance recently!
EDIT: Does this product help? http://www.amazon.com/gp/product/B0057OO9OC/
http://www.repairsuniverse.com/htc-droid-incredible-2-screen-replacements-repair-parts.html
I just replaced my digitizer for $11 on eBay.
It's an HTC one too (no "Verizon" branding, just "HTC".
It's for an Incredible S, came out of SoCal.
EDIT:
Here's the Digitizer
http://goo.gl/w7Vr0 $12.77
Here's the adhesive (sticker) that HAS to be replaced or it'll lift-up and will allow dust inside. Thus driving you F'ING INSANE. Mine is on order
http://goo.gl/34ylh
-Truckin-
Truckin'Ain't4Sissies said:
I just replaced my digitizer for $11 on eBay.
It's an HTC one too (no "Verizon" branding, just "HTC".
It's for an Incredible S, came out of SoCal.
EDIT:
Here's the Digitizer
http://goo.gl/w7Vr0 $12.77
Here's the adhesive (sticker) that HAS to be replaced or it'll lift-up and will allow dust inside. Thus driving you F'ING INSANE. Mine is on order
http://goo.gl/34ylh
-Truckin-
Click to expand...
Click to collapse
So I have dust under my screen even though my phone is completely original and never been dropped. Do you think it's worth taking apart, cleaning out, and replacing the adhesive? How long do you think it would take, and what is the likelihood of doing more damage to the phone?
Truckin'Ain't4Sissies said:
I just replaced my digitizer for $11 on eBay.
It's an HTC one too (no "Verizon" branding, just "HTC".
It's for an Incredible S, came out of SoCal.
EDIT:
Here's the Digitizer
http://goo.gl/w7Vr0 $12.77
Here's the adhesive (sticker) that HAS to be replaced or it'll lift-up and will allow dust inside. Thus driving you F'ING INSANE. Mine is on order
http://goo.gl/34ylh
-Truckin-
Click to expand...
Click to collapse
I bought the following on amazon:
http://www.amazon.com/gp/product/B005GIUHDQ
http://www.amazon.com/gp/product/B0057OO9OC
http://www.amazon.com/gp/product/B002EXHR1Q
I should have probably waited for more replies, like yours, here to get a better product link. Anyway, I guess I bought all the needed parts. I hope I get good quality material and I can get going with the repair... Do you think that they are good? The digitizer and tools didn't ship yet, so I can try and cancel and buy the one from ebay...
I actually just finished doing this a few hours ago. It does take some time to do it but if you have patience you can do it
You have to remove the LCD to remove the digitizer, so you will have all the parts out of the body of the phone. It is easier if you replace the body because it comes with new adhesive already perfectly cut and installed. If you reuse the old one you will have to scrape all the old adhesive off, then cut new adhesive. They are also available in red/silver/black so you can change colors.
Dermen said:
I actually just finished doing this a few hours ago. It does take some time to do it but if you have patience you can do it
You have to remove the LCD to remove the digitizer, so you will have all the parts out of the body of the phone. It is easier if you replace the body because it comes with new adhesive already perfectly cut and installed. If you reuse the old one you will have to scrape all the old adhesive off, then cut new adhesive. They are also available in red/silver/black so you can change colors.
Click to expand...
Click to collapse
When you say replacing the body, are you referring to the front housing/bezel? That is this: http://www.repairsuniverse.com/htc-droid-incredible-2-front-housing-bezel-replacement.html
If so, where did you buy it, as I want a reliable and reasonably priced product online. Thanks a lot for the help, btw!
litetaker said:
When you say replacing the body, are you referring to the front housing/bezel? That is this: http://www.repairsuniverse.com/htc-droid-incredible-2-front-housing-bezel-replacement.html
If so, where did you buy it, as I want a reliable and reasonably priced product online. Thanks a lot for the help, btw!
Click to expand...
Click to collapse
That is what I was referring to as the body, since all the parts attach to it. I actually got an entire new housing, came with the bezel, the middle part, and a new battery cover since my battery cover was beat up and I was changing colors. The middle part I didn't need but it was cheaper to buy all 3 parts than just 2.
I got it on ebay. The Incredible 2 and the Incredible S housing parts are interchangeable. I ended up getting S parts because they were cheaper. Most of the ebay sellers are in China so shipping takes 1-2 weeks depending on the seller. Repairsuniverse is good if you want it fast, I ordered from them once and got the part in 2 days.
Parts arrived. Links to tutorials PLEASE!
Dermen said:
That is what I was referring to as the body, since all the parts attach to it. I actually got an entire new housing, came with the bezel, the middle part, and a new battery cover since my battery cover was beat up and I was changing colors. The middle part I didn't need but it was cheaper to buy all 3 parts than just 2.
I got it on ebay. The Incredible 2 and the Incredible S housing parts are interchangeable. I ended up getting S parts because they were cheaper. Most of the ebay sellers are in China so shipping takes 1-2 weeks depending on the seller. Repairsuniverse is good if you want it fast, I ordered from them once and got the part in 2 days.
Click to expand...
Click to collapse
Hi guys, I just received all the parts. The following are what I ordered:
Housing Front for HTC Droid Incredible 2 Red Body Frame Chassis Bezel Part
Verizon HTC Droid Incredible 2 Replacement Touch Screen Digitizer Replacement Front Glass
2mm Wide Double Sided Layer Adhesive Sticky Tape Sticker
Tools for iPhone and most of phone
Now I am ready to replace the screen. Tutorials? I found some online, but would like to see what you guys followed to see if I can find simple and comprehensive tutorials!
Thanks! And wish me luck.
litetaker said:
Hi guys, I just received all the parts. The following are what I ordered:
Housing Front for HTC Droid Incredible 2 Red Body Frame Chassis Bezel Part
Verizon HTC Droid Incredible 2 Replacement Touch Screen Digitizer Replacement Front Glass
2mm Wide Double Sided Layer Adhesive Sticky Tape Sticker
Tools for iPhone and most of phone
Now I am ready to replace the screen. Tutorials? I found some online, but would like to see what you guys followed to see if I can find simple and comprehensive tutorials!
Thanks! And wish me luck.
Click to expand...
Click to collapse
1. Take it apart.
2. Put it together with new parts.
3. ???
4. Profit.
prototype7 said:
1. Take it apart.
2. Put it together with new parts.
3. ???
4. Profit.
Click to expand...
Click to collapse
Thanks, captain obvious!
I wanted to know if there is a detailed how to. Anyway, managed to take it apart. All guides end at taking it apart and say, "well, now you know how to dissemble it, just go in reverse and assemble it. Well. I wish they don't do that and show me through the reverse just to avoid mistakes. I remember having to redo IKEA furniture due to missing a few parts. Don't wanna do this messy procedure and realize I forgot a button or worst still putting the screen on!
Anyway, I am a grad student with a bachelors in Engineering... I should be ashamed if I can't do this! :silly:
repairsuniverse has a guide on youtube for replacing the digitizer. I found it easy to follow. Only difference is when you put it back together put the parts in the new body. You will also have to pull the speaker out of the old body and put it in the new. It is held in by glue, heat it with a hairdryer/heatgun and it comes out pretty easily. You might need to use some new adhesive on the speaker, I was able to pull the old adhesive out of the body in one piece using a hairdryer and some tweezers.
Dermen said:
repairsuniverse has a guide on youtube for replacing the digitizer. I found it easy to follow. Only difference is when you put it back together put the parts in the new body. You will also have to pull the speaker out of the old body and put it in the new. It is held in by glue, heat it with a hairdryer/heatgun and it comes out pretty easily. You might need to use some new adhesive on the speaker, I was able to pull the old adhesive out of the body in one piece using a hairdryer and some tweezers.
Click to expand...
Click to collapse
I am 100% done with the repair. But there are a few issues. The Vibrator motor seems to be not working. Then, the Digitizer I bought doesn't have a hole for the front facing camera! That is not a major setback as I rarely use it and I have a tablet and a PC to skype chat with... But it is sad that a feature is missing.
The big issue is the vibrator not working. I didn't mangle it and put it back in place as I am supposed to. Finally, I have 1 or 2 small dust particles under the screen and that is ok. I couldn't remove all the dust and it is a miracle I managed to get it that clean. Finally I seem to have a slight green tint/screen bleed at top left corner. I didn't have that before and I didn't distort the LCD while replacing. Is it due to a smudge on the LCD there? I suppose it is a minor issue and not something that will amplify as I have a Transformer prime that has screen bleeds and it is apparently because the screws are too tight.. So may be I tightened something too much? Anyway, if it doesn't deteriorate I am ok, as it is a very, very minor problem.
So, bottom line: Main problems > (1) No FFC (due to improper digitizer) -> I don't intend to fix it. (2) Vibrator motor not working.
Can someone help me with 2?
I fricking fixed it! I have WORK to do and I spent about 4 hrs fixing my phone!!! I'm kinda screwed for tomorrow! At least now my phone works...
That is odd it didn't have a spot for the front camera. I replaced my digitizer and it has a clear spot for it but it is not even close to centered. It actually looks like it would obstruct the camera but it doesn't. If you take it apart again for some reason you can scrape the black off the back so it is clear. However, it is very hard to do that and make it look decent.
Getting it perfect with no dust between the lcd and digitizer is very very hard to do. The first phone I did I actually took it apart again because there not only was dust but smudges on the other side of the digitizer. As for the bleeding I wouldn't think you could cause it from pressure in the inc2 because the lcd and digitizer are just held on the front by adhesive. The LCD has adhesive around the entire edge of it, I don't know if that also blocks light from the edges but if it does and there is a little bit missing maybe it is the cause.
Dermen said:
That is odd it didn't have a spot for the front camera. I replaced my digitizer and it has a clear spot for it but it is not even close to centered. It actually looks like it would obstruct the camera but it doesn't. If you take it apart again for some reason you can scrape the black off the back so it is clear. However, it is very hard to do that and make it look decent.
Getting it perfect with no dust between the lcd and digitizer is very very hard to do. The first phone I did I actually took it apart again because there not only was dust but smudges on the other side of the digitizer. As for the bleeding I wouldn't think you could cause it from pressure in the inc2 because the lcd and digitizer are just held on the front by adhesive. The LCD has adhesive around the entire edge of it, I don't know if that also blocks light from the edges but if it does and there is a little bit missing maybe it is the cause.
Click to expand...
Click to collapse
The following are the images of my fixed and "pimped" Dinc2.
https://www.dropbox.com/s/beop9oqvn6qo9p5/2012-09-25 00.23.03.jpg
https://www.dropbox.com/s/qh62damm82z0qmu/2012-09-25 00.22.32.jpg
Is the two tone color combination looking sweet, or should I change the back to red as well? I have a spare black back cover. If anyone has a spare red back cover, I can trade!
Plus, the "smudge/screen bleed" at the top left edge is seen in this pic:
https://www.dropbox.com/s/illeve11tomyrtw/2012-09-25 00.54.23.jpg (The black spot on the middle of the left side is a dust spec!)
Close up: https://www.dropbox.com/s/9ys4r2e6xmxfhnh/2012-09-25 00.54.48.jpg
Is the smudge bad? I think it is just a smudge on the LCD and not a damage to the LCD right? In that case, I am cool, as I most likely will cause other smudges if I attempt to redo it anyway. Plus, I am kinda bummed out about the lack of FFC, but I hardly use it and the whole process of removing the screen is SOOO tedious (and I don't have a heat gun, so had to put my phone a feet above a gas burner! ) and it was so painful and stomach wrenching to safely remove the LCD/digitizer that I don't wish to do it again to repair the FFC...
So, what do ya say?
I think the two tone looks good since the red phones have all black accents. I thought it was weird that the speaker on the red phone is silver, while all the other accents are black.
There seems to be a problem with the adhesive. The digitizer is raised by about 1 millimeter at the top while it is attached better at the bottom. I think it is because I had an additional horizontal strip of adhesive at the bottom to attach the digitizer to both the LCD and the buttons firmly while I didn't put such a horizontal strip at the top as I didn't see one when I dissembled it. If I put pressure on the digitizer for a while, it sets back in place for about half a day. Is this a serious problem? I don't feel like dissembling again.
litetaker said:
Hi guys, I just received all the parts. The following are what I ordered:
Housing Front for HTC Droid Incredible 2 Red Body Frame Chassis Bezel Part
Verizon HTC Droid Incredible 2 Replacement Touch Screen Digitizer Replacement Front Glass
2mm Wide Double Sided Layer Adhesive Sticky Tape Sticker
Tools for iPhone and most of phone
Now I am ready to replace the screen. Tutorials? I found some online, but would like to see what you guys followed to see if I can find simple and comprehensive tutorials!
Thanks! And wish me luck.
Click to expand...
Click to collapse
I just broke my screen and im looking to go the same route. This is a good phone to have as a back up after i get my upgrade and i dont want to get rid of it.
Anyway, did you need all those parts to successfully change your screen? I thought if you bought a new housing you would not need the adhesive tape?
Well, after a couple of weeks with my shiny new ZE551ML (RAM 2GB) purchased overseas in a trip, today the big bastard fell and cracked the glass .
So a new screen (complete screen, even if touch and LCD still works but don't want to mess with heat gun) is on the way via Aliexpress, I've done some similar procedures on more complicated phones but can't find any official procedure or documentation for this one, maybe too new?
So anyone has a PDF or webpage with the procedure?
Best I could find is this, but many pictures are missing
http://www.ewisetech.com/Pages/Product/teardown.aspx?s=1961&dt=6820&img=65699
EDIT: See post #6
http://www.myfixguide.com/manual/asus-zenfone-2-teardown/
Bout the best one available at the moment. Looks fairly simple to do, especially if you are replacing the entire screen assembly, not just the glass.
Sammaul said:
http://www.myfixguide.com/manual/asus-zenfone-2-teardown/
Bout the best one available at the moment. Looks fairly simple to do, especially if you are replacing the entire screen assembly, not just the glass.
Click to expand...
Click to collapse
Thanks, at least it's better than the one I found. But no specifics instructions on replacing the screen (separating the last housing from the old panel. Glue? Heat Gun? Double tape?)
gipikay said:
Thanks, at least it's better than the one I found. But no specifics instructions on replacing the screen (separating the last housing from the old panel. Glue? Heat Gun? Double tape?)
Click to expand...
Click to collapse
I do not know unfortunately. I would think it is tape, as most tend to be tape, but I couldn't say for certainty.
If you would like to set up an Out-of-Warranty RMA for ASUS to repair please send me a private message at [email protected].
Or you may apply for an RMA online at http://www.asus.com/us/support/
Please ensure to mention the damage otherwise it will be rejected if received with no reported damage.
Sincerely,
Frank
ASUS_USA
Here's an album I've used to replace my screen, (pictures are from the first link I've posted before) there are a couple of things to consider that aren't one these pictures nor any on the internet and don't make the sames mistakes I did. If you have pictures, and working screens from a different seller, please post it and I'll add it to the thread .
http://imgur.com/a/Rmy02
The tools I've used are screwdriver, a metal spudger, double-tape for cellphone repair, and a heat gun. And of course, your replacement screen. In my case I've purchased for 30 dol. on Aliexpress, but did not come with adhesive or tape so you have to have your own.
To remove the first section (4th picture), not only do you need to remove the cover and black and silver screws, but be careful because the center "rails" (the plastic parts to the sides of where the double sim and sd-card are) of the section are fixed to the battery section with "light" double tape, nothing too strong and can be lifted with care.
In the 5th picture, lift the white part of the connector and very carfeully to remove the ribbon. I've made the mistake to be too forceful and cracked the black part a litlle bit.
WARNING! THIS STEP IS THE MOST DIFFICULT, MANY PEOPLE BREAK THEIR BATTERY WHEN REMOVING, SO BE CAREFUL. AGAIN, YOU'VE BEEN WARNED
Now, one of the most difficult parts of the teardown is between 5th and 6th picture. After removing the uppers ribbon you have to take the battery compartment, and let me tell you that the white double-tape that glues the battery to the frame is one of the strongest i've ever encountered. A metal spudger can be helpful and you can start with pressing the left side, but don't separate too much or go too deep cause you might damage the envelope of the battery (I scrapped and exposed a litlle bit of the cells, but for the moment the phone works and don't heat. Just in case, I already ordered a new battery) . So be extra careful on this step.
In the 7th picture, things looks a little different of what I've found, the upper board has a metal protection that's soldered so DON'T TAKE IT OUT! Remove the upper left small ribbon very carefully. The cables on the down board that connects to the vibration motor are very fragile so be careful.
At this point, you can remove the speaker (I didn't) and you have the upper section, so the real hard work starts to be able to replace your screen. I'm sorry but i didn't take many pictures of this procedure, but again a metal spudger was helpful to be able to separate the cracked screen from the frame.
Remove all pieces of glue, glass or residue that's still on the frame and put the first part of the double-tape on the frame but don't take the upper part just yet. Take the replacement part and check it fits on the frame, paying atention to the two ribbons, one in the middle and other in the upper side. In my case, when I did put the screen I started with the upper ribbon and then guided the middle ribbon to it's hole and then fit the screen to the frame.
Make all the steps in backward order to be able to re-assemble the phone. The final optional step I did, is to seal the double-tape in the screen with the heat gun and some weight (I used a 2.5 drive and a couple of 3.5)
So in the end, I managed to replace the screen with only a couple of small mistakes. When my new battery arrives, the steps will be similar (I removed the white strong double tape with a light adhesive one, so it will be more easy to remove and replace the battery).
All in all, it went pretty well
LIST OF SELLERS WITH WORKING PARTS, according to users
AliExpress - Shenzhen OMG Trade co.,LTD - Screen For ZE551ML - USD 22.39 - gipikay (OP)
Nice to see someone succeeded, I laughted at the big hard drive lol Those 3.5'' HDs are huge. 30$ for the 5.5'' 1080p screen is pretty good, there are for 20$ too.
I tried once replacing an iphone 4 lcd but the problem ended up to be the motherboard.
btw Does anyone know where is the Intel GSM modem located on the motherboard? I see nothing from those pictures about the modem. I could not find a reliable way of disabling it, tried scripts, deleting dial etc apks and /lib/ril files, cellphone still searches for signal with no sim inserted and airplane mode on.
Back when I ordered, this one was the cheapest and the only one for ZE551ML (now the same vendor lists the screen as USD 25).
If I could guess, the modem should be in the upper board, under the metal shielding (the stock pictures indicates two visibles intel chips under the enclosure, maybe a third in the right, and one down in the board)
Thanks, so will it need to be unsoldered for removal? I only use voip and cannot use gsm anyway.
Experienced basically the exact the same when i changed my display essambly. I broke the foil around the battery too, only problem is I can not find any vendor selling a replacement battery. Can you give me a hint where to buy it?
Thanks in advance!
Gesendet von meinem ASUS_Z00AD mit Tapatalk
gipikay said:
Back when I ordered, this one was the cheapest and the only one for ZE551ML (now the same vendor lists the screen as USD 25).
If I could guess, the modem should be in the upper board, under the metal shielding (the stock pictures indicates two visibles intel chips under the enclosure, maybe a third in the right, and one down in the board)
Click to expand...
Click to collapse
Did you replace the glass only, or the entire screen assembly?
gettohhole said:
Experienced basically the exact the same when i changed my display essambly. I broke the foil around the battery too, only problem is I can not find any vendor selling a replacement battery. Can you give me a hint where to buy it?
Thanks in advance!
Gesendet von meinem ASUS_Z00AD mit Tapatalk
Click to expand...
Click to collapse
This is the one I've ordered, even if it says for ZE550ML (mine is 551) the part number and battery is the same (I think the difference between models is the screen resolution)
EDIT: I leave the link, but this seller sent me the wrong battery, see post #21. Now I'm waiting for AsusParts to ship me a new replacement
http://www.aliexpress.com/item/Free...ENT-BATTERY-C11P1424-3000MAH/32396187338.html
Sammaul said:
Did you replace the glass only, or the entire screen assembly?
Click to expand...
Click to collapse
Entire screen replaced, to separate the glass is really difficult
gipikay said:
This is the one I've ordered, even if it says for ZE550ML (mine is 551) the part number and battery is the same (I think the difference between models is the screen resolution)
http://www.aliexpress.com/item/Free...ENT-BATTERY-C11P1424-3000MAH/32396187338.html
Entire screen replaced, to separate the glass is really difficult
Click to expand...
Click to collapse
If you install 550 screen on 551 phone, it's possible you must install rom for 550 on 551, the big difference is the dpi.
I was just commenting on batteries. My phone is 551 and used a 551 replacement LCD, no differences there
Ok sorry just my bad english
gipikay said:
This is the one I've ordered, even if it says for ZE550ML (mine is 551) the part number and battery is the same (I think the difference between models is the screen resolution)
Entire screen replaced, to separate the glass is really difficult
Click to expand...
Click to collapse
gipikay said:
I was just commenting on batteries. My phone is 551 and used a 551 replacement LCD, no differences there
Click to expand...
Click to collapse
Did you test it already? Does work?
Sent from my ZE551ML
gettohhole said:
Did you test it already? Does work?
Sent from my ZE551ML
Click to expand...
Click to collapse
The new battery has not arrived yet
But a couple of scares aside ( if I completely drain the battery, it takes a litlle longer to reach minimal charge to power on ), the old battery seem to hold for the moment.
EDIT: See post #21, the sellers sent me the wrong battery, I think it's for Zenfone 5. Now I'm waiting for AsusParts to ship me a new replacement
Be careful
If anyone tries this, use extreme caution. I exposed some cells on the battery and a little smoke came out. I don't really know what to do from here because I'm afraid to continue this further. I guess I'm out of a 300 dollar phone and 30 dollar screen
Hi all
I ordered ZE551ML for my ZE550ML .... and the person already shipped so couldn't change the order
is it ok or i have to ship it back?
is it only PPI and resolution ?
Hi guys
Failed ... Got the 551ML and mounted on 550ML
Screen turns on but no Asus initial logo etc... Is not working
Mounted all out of the box... Not removing completely the broken screen.
Main board and battery connectors only.
You guys think anything can help ?