Develop Bugs

How to Get 3G on ATTs Galaxy S3 on T mobile Networks

Okay I have been looking at threads everywhere doing my research on How to get 1700MHz for ATT Galaxy S3 i747. Basically if your trying to use T mobile sim US only on a Atnt GS3 you will only get 2g(Edge). Well i found several ways to get 3G/4G to work! I will be making a Video tutorial for those who dont know much about Flashing and stuff like that. Tutorial will include How to flash files and what to do if something goes wrong! (TRY AT YOUR OWN RISK) i have done it to many devices and it worked successfully, but you never know. I will show you guys everything from scratch how it only gets 2g(edge) to after the whole process when 3g/4g is enabled!
But to make things clear im taking credit for basically doing a video guide which i will upload to YouTube and post here soon. And the other thread was getting messy for new users to find main post
Download Files and Instructions Down below
https://www.dropbox.com/sh/yo6oig6c7rws3iq/FvmfVqxiYd
PLEASE LEAVE FEEDBACK ON WHETHER IT WORKED OR NOT. Thank You
Stock Files Download: http://www.hotfile.com/dl/182319352/b8d55a6/I747UCDLK3_I747ATTDLK3_ATT.zip.html
If your Going to be Rooting ROOTING FILE: http://forum.xda-developers.com/showthread.php?t=1963790
If rooting Replace PLATFORM_T999UVALH3_1086264_REV04_user_low_noship.tar.md5 with root file given link above
If your after you flash Files you decide you wanna use a custom rom, You use Atnt roms so basically after flashing these files/rooting you do everything as if it where a atnt phone
Instructions
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flashing Instruction:
1. Launch Odin3 v3.04.exe Load, and load all the files as screenshot below.
2) LTE Binary: Take a battery out from the device and make sure the device is I747 ATT model.
- BOOTLOADER_T999UCALH3_1075297_REV04_user_low_noship.tar.md5
- PLATFORM_T999UCALH3_1075297_REV04_user_low_noship.tar.md5
- MODEM_T999UCALH3_1075297_REV04_user_low_noship.tar.md5
- CSC_ATT_I747ATTALH1_1075297_REV04_user_low_noship.tar.md5
[/B]
Credit to this the owner of this thread! http://forum.xda-developers.com/showthread.php?t=1771021
Moderator Edit, donation request links removed
Users here make guides and videos because they want to contribute to the cause, not make money for videos

Thanks for this! Few questions:
1. Is it possible to revert back to at&t if needed and how?
2. Is the master reset (complete device wipe including internal storage) a must?
3. What if I'm on the LK3 4.1.1? Will this still work or do I need to revert to the 4.0?
4. After completing this will i be able to flash new roms as desired or will that bork it up?
Oh and... First!

PMDColeslaw said:
Thanks for this! Few questions:
1. Is it possible to revert back to at&t if needed and how?
2. Is the master reset (complete device wipe including internal storage) a must?
3. What if I'm on the LK3 4.1.1? Will this still work or do I need to revert to the 4.0?
4. After completing this will i be able to flash new roms as desired or will that bork it up?
Oh and... First!
Click to expand...
Click to collapse
1.Yes you can flash files back to ATT i will be mentioning on my video when uploaded. But usually just find m5d files and flash back the atnt files
2. No factory rest/wipe not required for these files.
3.No you can do it off of any Android version. if for some reason doesnt work. revert back to stock version on your atnt s3
4. yes you can root and flash any rom
Email me or Message me on here

O and please vote on my poll on top of this thread after you try this method. Donations are welcome. Really put alot of work on to this. In sure your gonna appreciate this post. Video will be uploaded sometime soon
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

how about thanking or mentioning the people where this information originally came from?granted we needed a new thread but donations are not needed when credit wasn't given,heres the original, http://forum.xda-developers.com/showthread.php?p=40121505#post40121505

You should give credit to the original person who was kind enough to share the files and flashing instructions.
p.s. good job on the tutorial.
Sent from my SGH-I747

I think this is great that you made a guide
But you should thank your sources
And donations? Maybe your sources should recieve some of that as well.
Edit: I guess you did thank, near the bottom.

96hondaex said:
You should give credit to the original person who was kind enough to share the files and flashing instructions.
p.s. good job on the tutorial.
Sent from my SGH-I747
Click to expand...
Click to collapse
Yes i did give thanks to original post, when i first tried it. And stay tuned for a tutorial if any of you guys find this difficult. and like i said Video will be uploaded for free no charge. But donation will motivate me to get it done faster.

Takenover83 said:
I think this is great that you made a guide
But you should thank your sources
And donations? Maybe your sources should recieve some of that as well.
Edit: I guess you did thank, near the bottom.
Click to expand...
Click to collapse
Well i did thank after i saw everyones post, but yeah i should of done that at first. But to make things clear im taking credit for basically doing a video guide which i will upload to YouTube, and post here soon. And the other thread was getting messy for new users to find main post

Do we need to input the tmo APN settings or will they show up once a Tmo sim is inserted? If needed do you know the APN settings that will work?

PMDColeslaw said:
Do we need to input the tmo APN settings or will they show up once a Tmo sim is inserted? If needed do you know the APN settings that will work?
Click to expand...
Click to collapse
no need it automatically show when sim is inserted, But files need to be flashed with odin in order to unlock 1700MHz bands to use tmobile 3g/4g/lte depending on your location you might get 4g/lte speeds or only 3g

shafter13 said:
no need it automatically show when sim is inserted, But files need to be flashed with odin in order to unlock 1700MHz bands to use tmobile 3g/4g/lte depending on your location you might get 4g/lte speeds or only 3g
Click to expand...
Click to collapse
Ok my gs3 is running great with 3g speeds! Next question: Should I root this using the methods from the att forums or go over to the tmobile forums and use their root methods? Also can I flash an att rom or does it have to be a Tmo one?

PMDColeslaw said:
Ok my gs3 is running great with 3g speeds! Next question: Should I root this using the methods from the att forums or go over to the tmobile forums and use their root methods? Also can I flash an att rom or does it have to be a Tmo one?
Click to expand...
Click to collapse
Y
You have to use the ant s3 root file to flash instead of the one given on this form to root. I will be including on my video, but give it try the regular way. If it doesnt work reflash files. It should but if not ill will include in my video for you stay tuned

shafter13 said:
Y
You have to use the ant s3 root file to flash instead of the one given on this form to root. I will be including on my video, but give it try the regular way. If it doesnt work reflash files. It should but if not ill will include in my video for you stay tuned
Click to expand...
Click to collapse
This method worked fine! http://forum.xda-developers.com/showthread.php?t=2042775
Now to flash a 4.1.x rom and enjoy!

shafter13 said:
Thanks for donation! If you ever need anything let me know! Please vote on my poll theirs two question you answered one thank you
Click to expand...
Click to collapse
It wont let me go back and answer the poll again. Either way thanks for posting the files and all your help! I had seen this solution posted by the guy who figured it out, but he never posted the files or instructions anywhere so i was never sure if it worked or not.

downloaded the files, but it seems that there are only the fioles for the TMO phone. not the ATT phone for use on TMO network.

You don't need atnt files , if your planning on rooting use the root file instead of given file
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

shafter13 said:
You don't need atnt files , if your planning on rooting use the root file instead of given file
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
my phone is rooted, on tmobile. so i just flash the files that i downloaded?

happyhourtx said:
my phone is rooted, on tmobile. so i just flash the files that i downloaded?
Click to expand...
Click to collapse
yes, but use root file you used to root instead of the one provided in download

shafter13 said:
yes, but use root file you used to root instead of the one provided in download
Click to expand...
Click to collapse
dang. i dont know what root file i used! hahaha. how do i find this out? sorry for the questions, just want to get off edge!

[Q] Unlocking Canadian i317M note 2 for AWS

Hello folks!
I have a Rooted Canadian Carrier rogers galaxy note 2 i317M flashed with Clean ROM ACE 4.9.0 and running android 4.1.2....
Basically I want to sell it to a person who is going to use it on WIND MOBILE (AWS freq carrier)...and i have no idea if this is going to work with the hardware provided on the board or do i need to flash the wind modem to this phone.
below thread talks about US phones:
http://forum.xda-developers.com/showthread.php?p=34661189
not sure if this applies to me, i have seen local ppl doing it without a problem...
If someone had that experience (a step by step procedure) and would like to share this please do so, as I don't want to pay for the unlock but wanted to do it myself:fingers-crossed:
please let me know! :crying:

msiddiqu said:
Hello folks!
I have a Rooted Canadian Carrier rogers galaxy note 2 i317M flashed with Clean ROM ACE 4.9.0 and running android 4.1.2....
Basically I want to sell it to a person who is going to use it on WIND MOBILE (AWS freq carrier)...and i have no idea if this is going to work with the hardware provided on the board or do i need to flash the wind modem to this phone.
below thread talks about US phones:
http://forum.xda-developers.com/showthread.php?p=34661189
not sure if this applies to me, i have seen local ppl doing it without a problem...
If someone had that experience (a step by step procedure) and would like to share this please do so, as I don't want to pay for the unlock but wanted to do it myself:fingers-crossed:
please let me know! :crying:
Click to expand...
Click to collapse
Yes that unlock method works for us...
It is in a step by step format already.

thanks! but i don't see anyone reporting this working with AWS, does this method unlocks the phone to work with AWS freq like wind?
please advise.

msiddiqu said:
thanks! but i don't see anyone reporting this working with AWS, does this method unlocks the phone to work with AWS freq like wind?
please advise.
Click to expand...
Click to collapse
also it works on 4.1.1 at least but i have 4.1.2...looks like i have to downgrade it to stock 41.1 and then try this, what you suggest? i am using custom ROM clean ROM ACE 4.9 (4.1.2).

msiddiqu said:
also it works on 4.1.1 at least but i have 4.1.2...looks like i have to downgrade it to stock 41.1 and then try this, what you suggest? i am using custom ROM clean ROM ACE 4.9 (4.1.2).
Click to expand...
Click to collapse
No it depends on your radio, not the version.
Like it says, at least this version, it doesn't say only this version.
Try it, if not just flash an earlier radio for your carrier, and then flash back if you like

crixley said:
No it depends on your radio, not the version.
Like it says, at least this version, it doesn't say only this version.
Try it, if not just flash an earlier radio for your carrier, and then flash back if you like
Click to expand...
Click to collapse
are baseband same as radio version?if yes I am running MVLBMA3, i found this:
http://stockroms.net/file/GalaxyNote2/SGH-I317M
please assist which one should I try

msiddiqu said:
are baseband same as radio version?if yes I am running MVLBMA3, i found this:
http://stockroms.net/file/GalaxyNote2/SGH-I317M
please assist which one should I try
Click to expand...
Click to collapse
Yes...
Why not try it on the one you have now??
This is what I'm confused on.. If it doesn't work flash the older canadian radio from the development thread

crixley said:
Yes...
Why not try it on the one you have now??
This is what I'm confused on.. If it doesn't work flash the older canadian radio from the development thread
Click to expand...
Click to collapse
I already tried dude, but I am missing [4] NW Lock NV Data INITIALLIZ in the options...may be i dont need to flash stock ROM but just a previous baseband (as you mentioned), that would be fantastic if I just rollback the radio version only and keeping the firmware, please guide me to the sections you are referring to.

msiddiqu said:
I already tried dude, but I am missing [4] NW Lock NV Data INITIALLIZ in the options...may be i dont need to flash stock ROM but just a previous baseband (as you mentioned), that would be fantastic if I just rollback the radio version only and keeping the firmware, please guide me to the sections you are referring to.
Click to expand...
Click to collapse
HTML:
http://d-h.st/rJq
older!
HTML:
http://d-h.st/nMw
newer!
flash the older radio, then unlock, then flash back!

Please read forum rules before posting
Questions and Help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator

crixley said:
HTML:
http://d-h.st/rJq
older!
HTML:
http://d-h.st/nMw
newer!
flash the older radio, then unlock, then flash back!
Click to expand...
Click to collapse
thank you so much!, i downgraded the modem firmware and the option appeared, followed the instruction in the thread...it says its unlocked, now i just have to use a wind mobile nano sim to test this...will update this thread.!
thanks a bunch!

msiddiqu said:
thank you so much!, i downgraded the modem firmware and the option appeared, followed the instruction in the thread...it says its unlocked, now i just have to use a wind mobile nano sim to test this...will update this thread.!
thanks a bunch!
Click to expand...
Click to collapse
Glad it worked for you!
If you have issues with the wind SIM, there is a thread on here about using the bands for tmobile

msiddiqu said:
thank you so much!, i downgraded the modem firmware and the option appeared, followed the instruction in the thread...it says its unlocked, now i just have to use a wind mobile nano sim to test this...will update this thread.!
thanks a bunch!
Click to expand...
Click to collapse
Unlocking a Rogers Note 2 doesn't mean it will work on Wind Mobile. You will need to unlock AWS band (after you unlocked the phone). I'm actually surprised that no one mentioned this thread as it's been around for at least 8 months now.
Use the thread to unlock your Note 2 to work with Wind or Mobicity.

Thats exactly what is happening. ..it looks unlcoked but not working on wind I already tested a wind sim...would you please guid me to the link that does this aws band unlock for my note 2...
Appreciated!
Sent from my SGH-I317M using Tapatalk 4

Check the link below.
http://forum.xda-developers.com/showthread.php?t=2068041

Working
ruinkhan said:
Unlocking a Rogers Note 2 doesn't mean it will work on Wind Mobile. You will need to unlock AWS band (after you unlocked the phone). I'm actually surprised that no one mentioned this thread as it's been around for at least 8 months now.
Use the thread to unlock your Note 2 to work with Wind or Mobicity.
Click to expand...
Click to collapse
Thanks all for the support, my phone has been unlocked and working fine on WIND (AWS freq unlocked)...!:laugh:

[Q] Can I put T-mobile firmware on an unlocked SGH-M919V ?

I have an unlocked Nextel version of the SGH-M919V Baseband version M919VWXUFNE2
Can I put the stock T-mobile firmware this phone?
If so what is the procedure, I was recently up dated to 4.4.2
I need the WiFi calling feature, at my home reception is very poor so really need it for voice.

TRy THIS
nyjetshead said:
I have an unlocked Nextel version of the SGH-M919V Baseband version M919VWXUFNE2
Can I put the stock T-mobile firmware this phone?
If so what is the procedure, I was recently up dated to 4.4.2
I need the WiFi calling feature, at my home reception is very poor so really need it for voice.
Click to expand...
Click to collapse
TRy this app is work fine
https://play.google.com/store/apps/details?id=com.snrblabs.grooveip&hl=en
https://play.google.com/store/apps/details?id=com.gvoip&hl=en

nyjetshead said:
I have an unlocked Nextel version of the SGH-M919V Baseband version M919VWXUFNE2
Can I put the stock T-mobile firmware this phone?
If so what is the procedure, I was recently up dated to 4.4.2
I need the WiFi calling feature, at my home reception is very poor so really need it for voice.
Click to expand...
Click to collapse
SGH-M919 is the T-Mobile variant, so it should be no problem.
The easiest way to go back to stock is to use KIES, but that will revert you back to V.
You can download stock and flash with ODIN. As long as it is stock T-Mobile and you have a T-Mobile account, WiFi calling will work fine.

mhannigan said:
SGH-M919 is the T-Mobile variant, so it should be no problem.
The easiest way to go back to stock is to use KIES, but that will revert you back to V.
You can download stock and flash with ODIN. As long as it is stock T-Mobile and you have a T-Mobile account, WiFi calling will work fine.
Click to expand...
Click to collapse
I have a T-mobile account so with ODIN I can flash the current version directly and it will work... That's good news
Where do I find the latest version?
Is there anything I need to do specifically since I have Nextel firmware in the phone.

nyjetshead said:
I have a T-mobile account so with ODIN I can flash the current version directly and it will work... That's good news
Where do I find the latest version?
Is there anything I need to do specifically since I have Nextel firmware in the phone.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2267895
Sent from my SM-T700 using Tapatalk

mhannigan said:
http://forum.xda-developers.com/showthread.php?t=2267895
Sent from my SM-T700 using Tapatalk
Click to expand...
Click to collapse
Thanks
I will download the firmware and give it a try

nyjetshead said:
Thanks
I will download the firmware and give it a try
Click to expand...
Click to collapse
OK I tried ODIN 3.09 with firmware version M919UVUFNB4 which is 4.4.2 and it failed with a bootloader permission error
I already have 4.4.2 on the phone but its the Nextel Firmware
I read something about installing modem.bin is that my problem?

nyjetshead said:
OK I tried ODIN 3.09 with firmware version M919UVUFNB4 which is 4.4.2 and it failed with a bootloader permission error
I already have 4.4.2 on the phone but its the Nextel Firmware
I read something about installing modem.bin is that my problem?
Click to expand...
Click to collapse
No, the modem wouldn't be your problem. Since you are already updated to the official 4.4.2, you now have KNOX to worry about. If you don't care about setting the 0x1 flag, your best bet would more than likely be to flash a custom recovery and a modded/stock ROM specifically for the M919 from the Android Development section. You keep mentioning that you have a Nextel device... just to confirm, you have a T-Mobile SIM, correct? Because if not, WiFi calling won't work for you anyway.

Yup, I have a T-mobile account and the phone has a T-mobile SIM in it
I don't think that KNOX flag is an issue as it is an unlocked Non T-mobile phone.
If I have an issue with the phone at all T-mobile is not going to support it.
The model phone I have apparently is exactly the same as the T-mobile branded phone, when I registered it with Samsung they identify it as a T-mobile phone.
I guess I could just get a 1900MHZ repeater and call it a day as well.

nyjetshead said:
I guess I could just get a 1900MHZ repeater and call it a day as well.
Click to expand...
Click to collapse
You could, I guess... but I would be willing to bet that it would be a lot cheaper to just get WiFi calling working
Like I said, you'll probably have to forget going the Odin route and use a custom recovery and modded/stock T-Mobile TouchWiz ROM.

First of All I want to say sorry for poting this query in Another thread, really don't want to create another thread Can I install ROMs from Tmobile section to my i9505 (international Variant)? There're loads of great ROMs here wanna try some of them..but bit afraid to brick the device, even though both devices shares same hardware...just want to confirm from you people

lordcheeto03 said:
You could, I guess... but I would be willing to bet that it would be a lot cheaper to just get WiFi calling working
Like I said, you'll probably have to forget going the Odin route and use a custom recovery and modded/stock T-Mobile TouchWiz ROM.
Click to expand...
Click to collapse
T-mobile TouchWiz ROM.. Is that stable?
I'm not interested in constantly flashing the phone to get the bug fixes ...
I'd give a stable ROM a try so is that the one to go with?

nyjetshead said:
T-mobile TouchWiz ROM.. Is that stable?
I'm not interested in constantly flashing the phone to get the bug fixes ...
I'd give a stable ROM a try so is that the one to go with?
Click to expand...
Click to collapse
Yeah, most every ROM posted in the development section is stable, TouchWiz or AOSP. Just make sure you read the OP to confirm that whichever ROM has WiFi calling included as there are TW ROMs which have been ported to our device from other carrier's S4s.... Only those specifically for the M919 will have WiFi calling and it will be specified in the OP. I'm not going to recommend which ROM to flash, but from someone who's tried them all... you can't make a bad decision whatever you choose.
---------- Post added at 03:52 PM ---------- Previous post was at 03:49 PM ----------
Alipk52 said:
First of All I want to say sorry for poting this query in Another thread, really don't want to create another thread Can I install ROMs from Tmobile section to my i9505 (international Variant)? There're loads of great ROMs here wanna try some of them..but bit afraid to brick the device, even though both devices shares same hardware...just want to confirm from you people
Click to expand...
Click to collapse
Yes, you can. The only S4 ROMs you should stay away from are those made for the i9500 and non-standard S4's (i.e. S4 mini, S4 Active, etc). Any other variant of the standard S4 (including the i9505G) is good to go; just use a kernel for your specific device. On that note though, the i9505 and M919 kernels are interchangeable, so there's no need to follow that protocol when using our ROMs for your device and vice versa.

lordcheeto03 said:
---------- Post added at 03:52 PM ---------- Previous post was at 03:49 PM ----------
Yes, you can. The only S4 ROMs you should stay away from are those made for the i9500 and non-standard S4's (i.e. S4 mini, S4 Active, etc). Any other variant of the standard S4 (including the i9505G) is good to go; just use a kernel for your specific device. On that note though, the i9505 and M919 kernels are interchangeable, so there's no need to follow that protocol when using our ROMs for your device and vice versa.
Click to expand...
Click to collapse
Thanks bro for your reply, that's great to know and gained extra 150+ ROMs thread as well really good to use great ROMS in this section

After doing some research my question:
The reason I can't use this firmware is due to the fact that my current baseband is higher than the one I was attempting to flash.
I have FNE2 and was trying to flash FNB4?
Thoughts?

Still looking to do this did anything change here? Has anyone successfully with flashing this with the stock ROM?
I'm a T- Mobile customer
Thanks
I have an unlocked Nextel version 4.42 of the SGH-M919Vzlmnx Baseband / modem / PDA version M919VWXUFNE2

Ditto Note 4 (DN4) Rom for sgh-i317

I flahed this rom http://electron-team.com/dn4.html on my AT&T Galaxy Note 2 and i loved it! smooth and fast. but i cant find a radio/modem thats compattible with it. i practically did everything trying to make it work: extracting modems from other stock firmwares, flashing UCUCNE5 modem, restoring efs back ups...
i dnt knw if its the 4.4.4 version, but i guess its for the GT-N7100 only.
so an patiently waiting and hoping for the devs to make this rom available for us i317 users
if there any any thoughts about the DN4 rom for sgh-i317, post them here :good:

Ok man. Sounds great.
I'm about to think that all Galaxy Note are the same expecting Radio firmware. Gonna give it a try on the n7105.
:laugh:

Ok I tried it on n7105:
No GSM / 3g / 4g (wifi works)
No stylus recognition.
Runs smooth by the way.

Hi Prezzi,
So I have the AT&T Note II SGH-i317 version and I am thinking of updating the ROM to RN4 by Electron-Team. However, I would like to hear from you if it's working fine or not since the E-Team are stating that this ROM update is for the n7100 version only.
You mentioned that you can't find a radio/modem that is compatible with SGH-i317, what effects does that have on the phone? Does this mean you cannot access 3G/4G network now?
Thanks for your help in advance.

AbuMarie said:
Hi Prezzi,
So I have the AT&T Note II SGH-i317 version and I am thinking of updating the ROM to RN4 by Electron-Team. However, I would like to hear from you if it's working fine or not since the E-Team are stating that this ROM update is for the n7100 version only.
You mentioned that you can't find a radio/modem that is compatible with SGH-i317, what effects does that have on the phone? Does this mean you cannot access 3G/4G network now?
Thanks for your help in advance.
Click to expand...
Click to collapse
Here is a quote from sawdoctor who is maintaining (along with bajanman) the DN3 ROM for the E-Team...
sawdoctor said:
I'll try and explain it to you so you understand a bit better. Porting n7100 to the s3 is very easy as the framework is almost identical (I could do it in 10 mins). Porting n2 lte variants to s3lte or verizon is very easy framework is almost identical. Samsung in they're infinite wisdom decided to completely change the lte variants framework after 4.1. AFAIK only one person has managed to port between lte and none lte variants and that was the s3 and s3lte. To get dn4 work in on our device requires completely rewriting the framework which is why no one wants to do it. The eteam are very busy with work atm so it's been left to me and bajanman to rewrite the framework. We have done 2 of the 5 folders needed and will try to do the rest. It might happen it might never happen. Editing smali is not easy especially when you don't understand it lol. The eteam are actual developers not chefs like most so called devs. Anyone can make a rom with a kitchen you don't even need linux anymore.
Click to expand...
Click to collapse

MmmmBeeeeer said:
Here is a quote from sawdoctor who is maintaining (along with bajanman) the DN3 ROM for the E-Team...
Click to expand...
Click to collapse
Thanks a lot MmmmBeeeeer. So I guess we just have to wait until they finish rewrite the framwork which they have finished 2 out of the 5 folders... I just hope it doesn't take them too long to get it done...
Thanks for the info...

Im using DN3 v5 on my sgh-i317m canadian variant note 2 everything is great it run fast and smooth I like this rom alot. I have flashed a few different roms and this one is my favorite by far. I tried to flash DN4 it was successful other then it didnt read/recognize my sim card I asked me to install a sim I tried to go in to the settings and see if I could change my apn for my provider telus/koodo but it wouldnt let me access the apn due to the no sim did I do something wrong during flash? Or do I have to download something to get it to work with my provider?

The DN4 rom only works with the n7100 version only.

yes the ROM works fine! smooth and runs well.
but since the modem is not meant for i317, there will be no 3g/4g network, so u wont be able to make calls or anything pertaining to mobile network. still waiting to see if someone will port it to the LTE varients

note2 to note4
hi guys i dont remember where i get this flashable, but it has the 4.4.4 towchwiz with t0lte rid and radio, so, i think it could help porting dn4.... i will send you a link to download by PM im sorry i cant post outside links yet.
im so sorry about my english...

The place
Just wanted to be sure this is the place to be with the i317 variant? I know the original file was made for 7100, but hopefully it can be ported to the i317 model.
Evethough I don't have the 7100 I flashed it, just to see whats on it. Some exciting stuff! It really felt like a Note 4! Great work guys! I will check in hoping to one day find the i317 is ready to go. For now I will just use another great ROM DN3 5.2.

Im not understanding everyones trouble with running DN4 on the sgh-317 because i have now been running it on mine with full network, features, and stylus support. Its actually really smooth and enjoyable to use. There is a whole thread on it in the n7105 forum. I do know people where having trouble flashing all the updates and having them take but there is a custom CWM recovery that fixed all of that. Hope this helps give hope.

ruccarucca said:
Im not understanding everyones trouble with running DN4 on the sgh-317 because i have now been running it on mine with full network, features, and stylus support. Its actually really smooth and enjoyable to use. There is a whole thread on it in the n7105 forum. I do know people where having trouble flashing all the updates and having them take but there is a custom CWM recovery that fixed all of that. Hope this helps give hope.
Click to expand...
Click to collapse
Do you mind me asking How did you get DN4 on your sgh-317? And are you having any issues up til now? Thanks

divhandyman said:
Do you mind me asking How did you get DN4 on your sgh-317? And are you having any issues up til now? Thanks
Click to expand...
Click to collapse
Ita been running very smooth, great battery life, and no reboots or network issues either.
I just followed this post in the N7105 section http://forum.xda-developers.com/galaxy-note-2/development-n7105/addon-dn4-n7105-v1-0-31-12-t2988848 which also works with the sgh-317. At first i had trouble flashing everything and getting it to stick but someone posted in the thread linking to a custom CWM recovery that made it flash and boot properly.
Hope that helps you. If you have trouble i can make a step by step of what i did exactly.

ruccarucca said:
Ita been running very smooth, great battery life, and no reboots or network issues either.
I just followed this post in the N7105 section http://forum.xda-developers.com/galaxy-note-2/development-n7105/addon-dn4-n7105-v1-0-31-12-t2988848 which also works with the sgh-317. At first i had trouble flashing everything and getting it to stick but someone posted in the thread linking to a custom CWM recovery that made it flash and boot properly.
Hope that helps you. If you have trouble i can make a step by step of what i did exactly.
Click to expand...
Click to collapse
Would That Be Philz Custom Recovery? I would Appreciate any info you have. I would Love to flash it myself. Thanks:good:

divhandyman said:
Would That Be Philz Custom Recovery? I would Appreciate any info you have. I would Love to flash it myself. Thanks:good:
Click to expand...
Click to collapse
The recovery problem was fixed in his latest update. You can use anythng now. If you read the 1st post, he mentions it several times. Be sure to follow all instructions and it should flash fine.

kozmo21 said:
The recovery problem was fixed in his latest update. You can use anythng now. If you read the 1st post, he mentions it several times. Be sure to follow all instructions and it should flash fine.
Click to expand...
Click to collapse
Im glad he went ahead and made the fix, that will help a lot of people out from the start.

kozmo21 said:
The recovery problem was fixed in his latest update. You can use anythng now. If you read the 1st post, he mentions it several times. Be sure to follow all instructions and it should flash fine.
Click to expand...
Click to collapse
Thanks Again I will Be giving It a Try Later Today.

Question i ha e about dn4 gor the att ote 2 is in developer options i cant find the option to enable ART wanted to enable it and see if gra itynox will work with this rom
Sent from my SM-N910C using XDA Free mobile app

Flashed from my I-317 DN5 V2. Confirmed it's working. The FM radio has been removed though I think it's because of the bug reported in original post for 7100. Couple minor things don't work such as dual clock digital in the widgets but i doesn't bother me. Overall, it's smooth and stable as the DN5V2 sofar.

How to convert the SM-G920P to SM-920F

i have bought S6. Phon i bought was sm-g920p with sm-g920f rom(6.0.1). I upgraded my phone, It changed to sm-G920P usa version. My phone is now compromised. I tried lot of things. Is there any thing that can change to international device. My phone has 3g network only now.

That's because like mine, the s6 you bought is actually an S6 Sprint model (G920P) and not the international model(G920F). If i remember correctly the rom was modified with G920F baseband. I'm guessing your cell provider is using Band 3 LTE like mine. That's why u cant get LTE to work. This is link to that firmware. Its android version 6.0.1. But i cant remember if you need to flash by odin or twrp. You can check the zip after you've downloaded.
https://drive.google.com/file/d/0B5K2bv3OWv4fbm8zWXVIWFpmRWs/view

My phone is now 7.0 Nougat
Is it ok to install this rom. btw is my device no longer compromised? i didmt root this phone, but samsung internet says your phone is rooted??

I have the very same device although I didn't nothing yet..

i found another website with a rom to convert to G920F. Tried on my phone. it was successful. now my G920P can get 4G band 3. If you are brave enough and know what you are doing, then you can try. But still, its marshmallow (6.0).
https://tricksdoctor.com/samsung-galaxy-s6-g920p-convert-g920f/

You sure you are getting lte with your G925P ? as I know the G925P doesn't have the hardware support to receive the band 3 (1800mhz)...it supports other lte bands like band 4,5,12 etc.

Changing G920P to G920F can fix Hotspot option to show on settings?

Plz help me i need this rom for g920p convert to g920f fix rom this rom UAE

waseem55 said:
Plz help me i need this rom for g920p convert to g920f fix rom this rom UAE
Click to expand...
Click to collapse
I had this rom from the begining.

RevolverRz said:
I had this rom from the begining.
Click to expand...
Click to collapse
Bro u have this rom?

waseem55 said:
Bro u have this rom?
Click to expand...
Click to collapse
I had but now I'm using a different one..but why you need this rom? Your device is locked?

RevolverRz said:
I had but now I'm using a different one..but why you need this rom? Your device is locked?
Click to expand...
Click to collapse
My device unlocked bro i need this rom bro plz send me
This rom link before i used this rom very stable work
On my device plz help me bro i want this rom

Ryuzaki07 said:
i found another website with a rom to convert to G920F. Tried on my phone. it was successful. now my G920P can get 4G band 3. If you are brave enough and know what you are doing, then you can try. But still, its marshmallow (6.0).
https://tricksdoctor.com/samsung-galaxy-s6-g920p-convert-g920f/
Click to expand...
Click to collapse
I'm guessing that file is just a patch because it's 58mb?? Is it going to work on android 7?

you have a refurbished phone with g920p board and g920f baseband

use the mini space rom for 920P to get 920F Android 7.0

RevolverRz said:
use the mini space rom for 920P to get 920F Android 7.0
Click to expand...
Click to collapse
Sorry. What you meaning use mini space rom?

just thought i should update everyone. i did a bit of digging. and guest what, i think the convert rom are all fake. Even the one i use is actually a modded g920P modem. the 4g signal is actually just a system ui mod. Just out of curiosity i contacted 1 of the converted rom seller out there in the internet. and he admit that its actually just a rom with modded system ui that will show h+ signal icon as 4g. it wont actually allow you to use band 3 lte.

Ryuzaki07 said:
just thought i should update everyone. i did a bit of digging. and guest what, i think the convert rom are all fake. Even the one i use is actually a modded g920P modem. the 4g signal is actually just a system ui mod. Just out of curiosity i contacted 1 of the converted rom seller out there in the internet. and he admit that its actually just a rom with modded system ui that will show h+ signal icon as 4g. it wont actually allow you to use band 3 lte.
Click to expand...
Click to collapse
At less it fixes hotspot problem and another thinks. I need this Rom if you have. Can you share the link of this nougat converted Rom?

RamosChale said:
At less it fixes hotspot problem and another thinks. I need this Rom if you have. Can you share the link of this nougat converted Rom?
Click to expand...
Click to collapse
Just flash any stock nougat rom using odin. then try flash this modem via odin. this is the so called "converted" modem. LOL :cyclops:
https://www.sendspace.com/file/52cshz

Ryuzaki07 said:
Just flash any stock nougat rom using odin. then try flash this modem via odin. this is the so called "converted" modem. LOL :cyclops:
https://www.sendspace.com/file/52cshz
Click to expand...
Click to collapse
Thanks for sharing this but I just needed a G920F Nougat Rom converted for G920P