Hello
Is there any custom rom with hdmi out support ?I read pac rom had hdmi out but I can not find the build for h815 to test it .
dianxxyyzz said:
Hello
Is there any custom rom with hdmi out support ?I read pac rom had hdmi out but I can not find the build for h815 to test it .
Click to expand...
Click to collapse
Wrong forum ! Does stock support hdmi ?
genesixxbf3 said:
Wrong forum ! Does stock support hdmi ?
Click to expand...
Click to collapse
Hello ,
Yes , stock works , also CM13 and Slim6 rom kernels detect hdmi slimport ,but it do not works .
I read it can be cause of hardware/qcom/display but I'm not sure.
I did a app that use SurfaceFlinger to display on external hdmi ,on stock works but on Slim6 do not work ,but kernel detect it so it is not kernel ...
Personally tried to run hdmi out on a stock H815 and CM13, neither worked at all, didn't even recognise the cable was plugged it.
Sent from my LG-H815 using Tapatalk
I still hope there will be a super hero who will fix hdmi out for h815 in CM .
I have very good slimport hdmi support also on stock rom and also on a stock based rom . But the problem is that I can not compile stuff into this roms .I need to make some changes to the framework ....
dianxxyyzz said:
I still hope there will be a super hero who will fix hdmi out for h815 in CM .
I have very good slimport hdmi support also on stock rom and also on a stock based rom . But the problem is that I can not compile stuff into this roms .I need to make some changes to the framework ....
Click to expand...
Click to collapse
It has beed fixed here : https://forum.xda-developers.com/g4/general/slim-6-h815-unofficial-2017-stable-t3530976
Related
Bought OTA Conecter from ebay but it's not working itry two usb mouse
http://www.ebay.co.uk/itm/140741116011?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
dadyal said:
Bought OTA Conecter from ebay but it's not working itry two usb mouse
http://www.ebay.co.uk/itm/140741116011?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Click to expand...
Click to collapse
Im guessing that your are using a custom kernel. Some don't support usb OTG. Check if the kernel supports it, otherwise flash a kernel that does. For instance ICS siyah, thoravukk support using it. Cf-root kernels as well since they are mostly stock
takkaros said:
Im guessing that your are using a custom kernel. Some don't support usb OTG. Check if the kernel supports it, otherwise flash a kernel that does. For instance ICS siyah, thoravukk support using it. Cf-root kernels as well since they are mostly stock
Click to expand...
Click to collapse
no i am on stock XWLP7
return to seller .
jje
i told him and he sent me a replacement but it also dnt work
need Siyah Kernel
I have the same connector, when I bought had the same problem, only usb stick he recognized me, started reading and realized that samsung lock that option, then install Siyah kernel and now I can connect keyboards, moues, etc..
here is the thread
http://forum.xda-developers.com/showthread.php?t=1555259
hello every one
i bought (mhl hdmi ) hdtv adabter model : eia2uhunbkg type cek 04/2011 Rev. 1.2 samsung
its working only for video ( movies ) its not showing pictures or any thing else ,
rom cm10 4.1.2
there is any one have idea how to fix this problem ,
Thanks and Regards
LARS1982 said:
hello every one
i bought (mhl hdmi ) hdtv adabter model : eia2uhunbkg type cek 04/2011 Rev. 1.2 samsung
its working only for video ( movies ) its not showing pictures or any thing else ,
rom cm10 4.1.2
there is any one have idea how to fix this problem ,
Thanks and Regards
Click to expand...
Click to collapse
its an known problem with CM10 and it wont be fixed soon, on other roms it will work
Regards, Tomaat
Tomaat said:
its an known problem with CM10 and it wont be fixed soon, on other roms it will work
Regards, Tomaat
Click to expand...
Click to collapse
Thanks Tommat
is it work with cm9 9.1.0 stable rom or i should back to original rom 4.0.4
Try TW rom
LARS1982 said:
Thanks Tommat
is it work with cm9 9.1.0 stable rom or i should back to original rom 4.0.4
Click to expand...
Click to collapse
I tried installing CM9 after being in your situation, but got stuck at boot animation of CM9. Now back to CM10. Gapps are dead, will re flash it.
Somewhere I read that TW. Based ROMs give HDMI but haven't tried. You can try and let us know.
LARS1982 said:
Thanks Tommat
is it work with cm9 9.1.0 stable rom or i should back to original rom 4.0.4
Click to expand...
Click to collapse
None of the aosp based roms support mhl afaik. The ones that work are TW based roms.
Ps. RocketMiui works with it.
LARS1982 said:
hello every one
i bought (mhl hdmi ) hdtv adabter model : eia2uhunbkg type cek 04/2011 Rev. 1.2 samsung
its working only for video ( movies ) its not showing pictures or any thing else ,
rom cm10 4.1.2
there is any one have idea how to fix this problem ,
Thanks and Regards
Click to expand...
Click to collapse
Hi Lars,
I first tried mhl cable like you did. But ended up with a wifi modem for the Samsung tv, and the application iMedia share on my galaxy note streams video, pictures and music like a charm...
Bobo
same here...
Thank you guys
any way i will wait the official rom (jelly bean )
Hi, plese tell me any post to a good rom with Android 4.2.2, mhl, otg and root for N5100? ... and with working download links ... i've read a lot and haven't find anything
You can use the rom X-Note Build 4 .....i think it will ok with yr request.....
As the topic indicates....
What roms support mhl
I have a mhl to hdmi cable, with attached USB power, but can't get it to work on slimkat.
I use to use civz custom and xnote... both working fine... but no CM/AOSP/AOKP have the support for MHL yet...
only firmware base from samsung firmware are working.
Great thank you. Wanted to wait until 4.4.2 to go back to TW, but I may as well get reacquainted sooner than later.
Hello,
I recently needed an emulation machine for work. So I took my old note 2 rooted it and downgraded it to 4.1.1 so I could connect my wiimotes (the main purpose of this) for said emulators. As you all know I'm sure the Bluetooth stack is missing the protocol for this connection type. In 4.2+
My question is.....is there anyway to make a custom ROM for the note 10.1 2014 edition that is based on 4.1.1?
Thanks.
plugsmustard said:
Hello,
I recently needed an emulation machine for work. So I took my old note 2 rooted it and downgraded it to 4.1.1 so I could connect my wiimotes (the main purpose of this) for said emulators. As you all know I'm sure the Bluetooth stack is missing the protocol for this connection type. In 4.2+
My question is.....is there anyway to make a custom ROM for the note 10.1 2014 edition that is based on 4.1.1?
Thanks.
Click to expand...
Click to collapse
Did you try with Xluco's kernel ? it has written to have the ability to support Wii Controller ( If it worked , let me know , because I'm cooking Prime V5 and It's also going to have the Wii Controller support too ) .. I'm waiting eagerly for you'r results
With Best Wishes
Hitman1376
I'm gonna sound like a noob. But to be honest kernels are the things I never screwed with. Do i just flash this with twrp?
It's got the rooted 5.1.1 fw on it and just to clarify it's the SP600
I've got everything I need here (including the Kernel I downloaded) at work so.....
Okay so I flashed the kernel using twrp and unfortunately the wiimotes would not connect using blue IME or the old Wiimote Controller app.
Is there something I'm missing or does it just not work for me?
plugsmustard said:
Okay so I flashed the kernel using twrp and unfortunately the wiimotes would not connect using blue IME or the old Wiimote Controller app.
Is there something I'm missing or does it just not work for me?
Click to expand...
Click to collapse
So , I guess It means that the drivers are not compatible or maybe even not working at all ... If it's possible , flash a 4.4.2 TW stock ROM and try this kernel HERE ( If you're currently on 5.1.1 you need to flash a stock ROM using Odin ) ... this kernel I provide you is one of Xluco's KK kernels ... I'll wait for you'r results then ... Good luck
With Best Wishes
Hitman1376
Re did everything. Installed 4.4.2 and the kernel you mentioned and it still does not work with either application.
Error: bt socket connection failed
Is there a difference between stock and TW stock cuz I installed fresh stock then rooted it and installed that kernel
Regardless of whether TW stock is TouchWiz
I installed a 4.4.2 TW stock rom with root and installed the same kernel. Still nothing.
I don't know what I'm talking about here but is it really this difficult? I'm know it is to some degree, but how has this not been rectified a million times over?
Lost cause then?
Thanks to everyone who accomplishes these things and a massive thanks to the people who make the things we use to do these things...lol
plugsmustard said:
Re did everything. Installed 4.4.2 and the kernel you mentioned and it still does not work with either application.
Error: bt socket connection failed
Is there a difference between stock and TW stock cuz I installed fresh stock then rooted it and installed that kernel
Click to expand...
Click to collapse
plugsmustard said:
Regardless of whether TW stock is TouchWiz
I installed a 4.4.2 TW stock rom with root and installed the same kernel. Still nothing.
I don't know what I'm talking about here but is it really this difficult? I'm know it is to some degree, but how has this not been rectified a million times over?
Lost cause then?
Thanks to everyone who accomplishes these things and a massive thanks to the people who make the things we use to do these things...lol
Click to expand...
Click to collapse
Well , I'm Sorry to say that but , I guess there's no solution for getting the Wiimote to work on you're TAB ( Actually , XBOX & PS remotes are all accepted with Xluco's or even my kernel ) But , as you can see in many other threads , It seems like currently there's no way ... Don't worry MAN , I personally don't have a Wiimote let's just take it easy ... just enjoy the latest TW ROM with Prime V4 ( actually , V5 is in it's way !! )
With Best Wishes
Hitman1376
Well damn. I guess I'll just have to use my note 2 with the tv out.....no sound though.
Thanks. And I'll definitely install they new prime v5