Related
Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
why you flashed it? you should have claim the warranty.
skd1993 said:
Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
Click to expand...
Click to collapse
Remove battery, sims and mmc
Wait atleast 1-2 minutes
Put all back
Now go to recovery and wipe all
Install your stable rom zip
Reboot.
It seems that your phone is bricked. I think that you are under warranty and you should go to service centre. You can also flash a custom ROM
skd1993 said:
Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
Click to expand...
Click to collapse
Sir, before flashing any ROM wipe all data and dalvik cache
Try this this may help you:thumbup:
how bro
Mohitash said:
Remove battery, sims and mmc
Wait atleast 1-2 minutes
Put all back
Now go to recovery and wipe all
Install your stable rom zip
Reboot.
Click to expand...
Click to collapse
flash your phone with sp flash tool work well
Sushant Rohan said:
Sir, before flashing any ROM wipe all data and dalvik cache
Try this this may help you:thumbup:
Click to expand...
Click to collapse
my android one (micromax) stuck on boot animations .i cant go to boot selections......what to do ..os is marshmallow
android one stuck in boot loop.
hi,
my android one had received OTA update on 1 may. after that once due to low batt it got switched off automatically and since then it is not booting up. i tried charging it full and also tried to flash it using sp tools. but nothing happens once i click the download button. the mobile dosent detect with its battery removed also. i even tried factory reset but it didn't work.
pl help.
I have flashed custom Rom But
skd1993 said:
Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
Click to expand...
Click to collapse
I have flashed official 6.0 after bootloop but no service(emergency call) after that.
I have also tried to install CM13 but the problem is still there
my phones warranty is over now.
please help me .
Sushant Rohan said:
Sir, before flashing any ROM wipe all data and dalvik cache
Try this this may help you:thumbup:
Click to expand...
Click to collapse
My Karbonn Android One also got stuck in the bootloop.
Tried:
1) Wipe data/factory reset
2) Wipe cache partition
3) Mount/System
No improvements. Any suggestions please!!!!
Same here.. [Solved]
skd1993 said:
Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
Click to expand...
Click to collapse
Hey,
Try this... Worked for my canvas a1...
1. Install Minimal ADB and fastboot (search google)..
2. Download universal sprout 4(or 8) stock rom from xda..
3. Use philz touch recovery and wipe cache in your mobile through recovery....
4. Now install your stock rom from .zip file..
5. That's it.... Reboot and your phone is back..!
Regards,
Aashif
Ashabilash said:
My Karbonn Android One also got stuck in the bootloop.
Tried:
1) Wipe data/factory reset
2) Wipe cache partition
3) Mount/System
No improvements. Any suggestions please!!!!
Click to expand...
Click to collapse
Just flash stock rom with pc or laptop and if you have custom recovery flash stable rom it will be fixed
how!?
Can someone tell me how m I going to install TWRP even my device stuck on bootloop and can't pass on it. I try the recovery method like factory data clear participation but doesn't even work. My device is firefly mobile plss tell me
markphaul13 said:
Can someone tell me how m I going to install TWRP even my device stuck on bootloop and can't pass on it. I try the recovery method like factory data clear participation but doesn't even work. My device is firefly mobile plss tell me
Click to expand...
Click to collapse
Turn off device completely, wait for 100 seconds and connect the turned off phone to the PC. Hold the Power and Volume Up button together. You will see a menu.
1) Select fastboot mode using volume buttons.
2)On your PC download adb and extract it anywhere and navigate there.
3)open command prompt in that directory and type fastboot devices.
4)you will see serial no. Of your phone if not try reconnecting phone and letting the drivers install.
5)Using Android one toolkit Flash TWRP.
6)Flash whatever new system you want and tadaa......
Guys please help
my phone n7505 and i had rooted it
first i flashed TWRP and did factory reset and data wipe cache and dalvic cache and system
and tried to flash the ROM but it stuck at boot logo
and then tried PhilZ Touch CWM V6 and i did the same hard reset and flashed the ROM again but still the same
Stuck at boot logo
i tried several time guys
and i forgot to do Backup
I'm Fu**ed up
HeELP PLEASE :crying:
SAW MJ said:
Guys please help
my phone n7505 and i had rooted it
first i flashed TWRP and did factory reset and data wipe cache and dalvic cache and system
and tried to flash the ROM but it stuck at boot logo
and then tried PhilZ Touch CWM V6 and i did the same hard reset and flashed the ROM again but still the same
Stuck at boot logo
i tried several time guys
and i forgot to do Backup
I'm Fu**ed up
HeELP PLEASE :crying:
Click to expand...
Click to collapse
For The Note 4 Mini S6 V6 TWRP is necessary don't use Philz Touch
Have you tried to remove the battery and restart after the clean install?
I think you should start with a clean base by reflashing a Rom Stock by Odin look on sammobile.com
REroot
Reflash recovery TWRP
And reflash this V6
Perhaps THe V6 Works but I recomend V5 for the moment and waiting for the next version
I wonder..
SAW MJ said:
Guys please help
my phone n7505 and i had rooted it
first i flashed TWRP and did factory reset and data wipe cache and dalvic cache and system
and tried to flash the ROM but it stuck at boot logo
and then tried PhilZ Touch CWM V6 and i did the same hard reset and flashed the ROM again but still the same
Stuck at boot logo
i tried several time guys
and i forgot to do Backup
I'm Fu**ed up
HeELP PLEASE :crying:
Click to expand...
Click to collapse
K! by far, you also formatted and used Philz!
Now i suggest you flash Stock rom(hence stock recovery will also be added).
Then if bootloop occurs, remove battery, insert and go to stock recovery and clean cache partition and factory reset
switch on, then go to odin mode and flash philz and then Format/do clean wipe,flash Note4mini and then factory reset(format)/'do clean wipe' .
Clean steps,i hope they help!
Hit Thanks if i helped,and spread Cheers
So I just got Mi6 in my hands today, and tried to install Xiaomi EU v8.5.2.0 ROM.
Now, it won't boot. Stuck in Mi logo.
I have flashed TWRP
I have wiped Dalvik Cache, Cache, System, Data, Internal Storage (and probably that messed it up)
Then, installed the ROM via sideload. Rebooted phone, and it's stuck in boot logo
Some friends said something about "boot.img" and SuperSU. What should I do now?
Thank you!
I think your best bet now to use miflash tool and flash fastboot rom.
Though if you can flash twrp, you should be able to flash custom rom using that. Follow the steps 1 by 1. Sometimes certain rom needs u to flash firmware first.
cagriari said:
So I just got Mi6 in my hands today, and tried to install Xiaomi EU v8.5.2.0 ROM.
Now, it won't boot. Stuck in Mi logo.
I have flashed TWRP
I have wiped Dalvik Cache, Cache, System, Data, Internal Storage (and probably that messed it up)
Then, installed the ROM via sideload. Rebooted phone, and it's stuck in boot logo
Some friends said something about "boot.img" and SuperSU. What should I do now?
Thank you!
Click to expand...
Click to collapse
Hi if access to twrp put this ROM on : http://bigota.d.miui.com/7.8.24/miui_MI6Global_7.8.24_52ee82c864_7.1.zip
Then flash via twrp then reboot
jejemc said:
Hi if access to twrp put this ROM on :
Then flash via twrp then reboot
Click to expand...
Click to collapse
Well, I have fixed it by repairing system partition. But now, no EU ROM will boot. MIUI Global Stable v8.2 boots, but Wi-Fi and fingerprint is broken.
cagriari said:
Well, I have fixed it by repairing system partition. But now, no EU ROM will boot. MIUI Global Stable v8.2 boots, but Wi-Fi and fingerprint is broken.
Click to expand...
Click to collapse
So he restarted? Test can be ROM dev to see
But bizarre that on stable ROM this does not work
Yeah, I would suggest flash stable fastboot rom via miflash and start again. If fingerprint/wifi still broken after flash fastboot rom via miflash, there is high chance the hardware is broken.
If it does back to stock and everything works, follow flash procedure for custom rom step by step. There is no real reason it will not work. Good luck
yumm91 said:
Yeah, I would suggest flash stable fastboot rom via miflash and start again. If fingerprint/wifi still broken after flash fastboot rom via miflash, there is high chance the hardware is broken.
If it does back to stock and everything works, follow flash procedure for custom rom step by step. There is no real reason it will not work. Good luck
Click to expand...
Click to collapse
MiFlash gives me "cast id invalid" error, I've been using TWRP and fastboot to flash. I flashed it few times, but it didn't work. So I wiped all the data, flashed again and it works now.
Any ideas why won't EU ROMs boot?
Thanks!
I am using xiaomi.eu ROM myself flashed via twrp 3.1.1.0 Seems working fine. I just boot the twrp via fastboot boot, using twrp mtp to transfer EU rom inside, and flashed.
Done. Everything works. I am currently under miui 8.2 atm. Seems good so far.
Hello guys,
I was actually using twrp with miui 9.2 for over a month without any problem but then this new update come and i update my device and it recover the original mi recovery.
Thats normal for me. Then i installed twrp via fastboot, rebooted to twrp and without touching anything i rebooted to system then only mi logo showing.
I again reset my phone. Flash fastboot image of mi 9.2 global and update it through ota and again flash twrp then fectory reset but the reault are same.
I also do above steps and do wipe delvik and cache, dont wipe delvik and cache and dont do factory reset, delete the backup recovery from system but after all this the result remain same.
I also download the china version of fastboot rom which is miui 9.5 and replace the recovery.img with twrp (change the name recovery.img) but still no luck.
Soo what i miss? Is there no way to boot miui 9.5 with custom recovery?
ajju akm said:
Hello guys,
I was actually using twrp with miui 9.2 for over a month without any problem but then this new update come and i update my device and it recover the original mi recovery.
Thats normal for me. Then i installed twrp via fastboot, rebooted to twrp and without touching anything i rebooted to system then only mi logo showing.
I again reset my phone. Flash fastboot image of mi 9.2 global and update it through ota and again flash twrp then fectory reset but the reault are same.
I also do above steps and do wipe delvik and cache, dont wipe delvik and cache and dont do factory reset, delete the backup recovery from system but after all this the result remain same.
I also download the china version of fastboot rom which is miui 9.5 and replace the recovery.img with twrp (change the name recovery.img) but still no luck.
Soo what i miss? Is there no way to boot miui 9.5 with custom recovery?
Click to expand...
Click to collapse
Should be you install magisk module before restart system from twrp?
jjrojo said:
Should be you install magisk module before restart system from twrp?
Click to expand...
Click to collapse
Yup its done i have installed magisk immediately after flashing twrp and it works
Thanks for ur time
I have now tried to install the latest RR and Omnirom builds and the problem remains the same.
I've been very particular about wiping data before the installs.
Here is what I have done,
Performed data wipe by typing "yes" when requested. Used advance wipe to wipe everything.
Installed Rom, Stock Gapps and Magisk zip files.
Wiped Cache.
Reboot
The phone will not boot and only returns to recovery.
Can anyone help?
Here is my TWRP log if this helps - https://pastebin.com/ghpXkt3t
Not sure if this is relevant, but every time I try to flash a ROM it always fails on the first attempts and needs a second try to succeed.
TylerDurdenK said:
I have now tried to install the latest RR and Omnirom builds and the problem remains the same.
I've been very particular about wiping data before the installs.
Here is what I have done,
Performed data wipe by typing "yes" when requested. Used advance wipe to wipe everything.
Installed Rom, Stock Gapps and Magisk zip files.
Wiped Cache.
Reboot
The phone will not boot and only returns to recovery.
Can anyone help?
Click to expand...
Click to collapse
If you only get to the mi logo and not the ROM boot screen then format data "yes 3-4 times in a row.
If that doesn't work then wipe the system and data and retry
I was only getting the Mi logo, so I did the format data 4 times in a row and rebooted.
I then saw the Omnirom logo for the first time!
unfortunately 2 seconds later I'm back in TWRP.
I have now tried for the 5th time to perform a fresh install.
Formatting data multiple times, wiping system and data multiple times.
The result is the same.
I see a flicker of the Omnirom logo and I get booted back into recovery.
TylerDurdenK said:
I see a flicker of the Omnirom logo and I get booted back into recovery.
Click to expand...
Click to collapse
Please try this:
1. Wipe: Dalvik / Art Cache; System; Data; Cache;
2. Go back to main TWRP screen and install the rom, install Google Apps, install "addonsu-15.1-arm64-signed.zip" (in case of Lineage) or the latest Magisk (in case of other rom)
3. Wipe Cache
4. Reboot
If this doesn't work and the device restarts in twrp, then pls download the twrp flashable Xiaomi rom from here: http://en.miui.com/download-334.html
1. Wipe: Dalvik / Art Cache; System; Data; Cache
2. Go back to main twrp screen and install the Xiaomi rom. Do not reboot.
3. Go back to main twrp screen and Wipe: Dalvik / Art Cache; System; Data; Cache
4. Go back to main twrp screen and install the rom (Lineage or OMNI or RR), install Google Apps, install "addonsu-15.1-arm64-signed.zip" (in case of Lineage) or the latest Magisk (in case of other rom)
5. Wipe Cache
6. Reboot
I had the same problem and this method worked for me, maybe it will work for you too. :fingers-crossed:
If it doesn't then maybe you have to start from zero and flash the original Xiaomi rom in fastboot mode (rom here: http://en.miui.com/a-234.html) via MIUI ROM Flashing Tool, unlock bootloader (bootloader might relock), flash twrp and then flash new custom rom.
No idea what happened but I have the same issue atm.
I was running a recent Omnirom for a few weeks. System got unstable, so decided to flash the newest version. Got me stuck in a bootloop. I tried everything, short of relocking and unlocking the bootloader.
- Full wipe, including storage
- Reflash Global Dev through TWRP.
- Flash stock Global Dev over flashboot
- Flash Omni, wipe, flash omni again.
All the same. Global Dev runs, all AOSP roms just go into bootloop. No idea what went wrong, I've flashed tens of custom roms over the past months without issues.
Firipu said:
No idea what happened but I have the same issue
All the same. Global Dev runs, all AOSP roms just go into bootloop. No idea what went wrong, I've flashed tens of custom roms over the past months without issues.
Click to expand...
Click to collapse
Then maybe the right solution to get out of bootloops would be to start from zero and flash the original Xiaomi rom in fastboot mode (rom here: http://en.miui.com/a-234.html) via MIUI ROM Flashing Tool, unlock bootloader (as bootloader will relock), flash twrp, do a full wipe and then flash new custom rom.
senerex said:
Then maybe the right solution to get out of bootloops would be to start from zero and flash the original Xiaomi rom in fastboot mode (rom here: http://en.miui.com/a-234.html) via MIUI ROM Flashing Tool, unlock bootloader (as bootloader will relock), flash twrp, do a full wipe and then flash new custom rom.
Click to expand...
Click to collapse
I have reflashed the original Xiaomi ROM (running it atm ) using the official Xiaomi Flash Tool.
I just did not relock my bootloader doing that (there's an option to leave it unlocked). Will relocking and then unlocking the bootloader really make a difference?
Firipu said:
I have reflashed the original Xiaomi ROM (running it atm ) using the official Xiaomi Flash Tool.
I just did not relock my bootloader doing that (there's an option to leave it unlocked). Will relocking and then unlocking the bootloader really make a difference?
Click to expand...
Click to collapse
Not really. You ev. save yourself a waiting time of 72h....
Not sure what happened. I set up MIUI completely. Then, getting frustrated after using it for 10 minutes, decided to try one more time. Same thing.
1) Fastboot flash TWRP.
2) Wipe
3) Flash Rom
4) Flash GAPPS
Worked this time. No idea what went wrong the first 4 times. Only difference is that I went through the trouble to set up the entire phone this last time before trying again.
Anyhoo, so if anyone has the same issue. Set up phone in MIUI, only then wipe/flash
I got mine working by not installing Magisk. I just flashed Omnirom and GApps and it worked.
After setting up my phone I have since rebooted into recovery and installed Magisk and it works.
Can't system boot after install TWRP, Lazy Magisk on MIX M2S
Hello,
I have this problem, the phone does not boot after TWRP, Lazyflasher and Magisk being installed all fine.
I have re-installed the official ROM on my Xiaomi MI MIX 2S, then TWRP is fine too, then Lazy and Magisk fine.
When I reboot, it is stocked on MI logo whatever I do.
I have tried most of the advise posted but still stocked.
I restarted from scratch, installing again the official ROM, then fastboot flash recovery twrp, then lazy and Magisk, but still stocked on MI.
Thanks a lot in advance
Did you wipe system by any chance.. If you did you need to flash miui again with fastboot.. Or boot into fastboot and type this command 'fastboot format userdata' and press enter. You are facing this issue because of encryption
goxthak0 said:
Did you wipe system by any chance.. If you did you need to flash miui again with fastboot.. Or boot into fastboot and type this command 'fastboot format userdata' and press enter. You are facing this issue because of encryption
Click to expand...
Click to collapse
Gratitude for your reply. What do you mean by "wipe system". I installed the rom and then TWRP etc...
I flashed the ROM again and went into bootloader
I typed "fastboot format userdata" and the system replied:
"/usr/local/bin/mke2fs failed with status 1
mke2fs failed: 1
error: Cannot generate image for userdata
Can you advise.
Thanks a LOT
Did you use the correct rom ? Mi mix 2 or mi mix 2s?
fotocreaman said:
Did you use the correct rom ? Mi mix 2 or mi mix 2s?
Click to expand...
Click to collapse
I used MI MIX 2D:
As in en.miui web site
https://en.miui.com/download-343.html
Author: MIUI Official TeamVersion: V10.0.9.0.PDGMIFH (MIUI10) Size: 1.7G
My mobile is:
MI MIX 2S, Android 9PKQ1
MIUI Global 10.0
Thanks a lot for your advise as always stock, despite different attempts
Did you try to flash using mi tools?
fotocreaman said:
Did you try to flash using mi tools?
Click to expand...
Click to collapse
NO, I followed the usual process with ADB tools.
However, I have no boot "stuck at MI logo (bootloop)" problem when I flash the ROM.
It happens only when use TWRP and flash Magisk and Lazy.
Then, when I restart it got stuck at MI Logo.
Do you suggest I try to flash with MI logo (I don't have a PC though).
If so, should I just flash the ROM and then, what about TWRP, should I use MI flash or ADB?
I just want to make sure that the problem is with the ROM instal?
Thanks a LOT